Commit graph

361,649 commits

Author SHA1 Message Date
Chris Metcalf
395e095ed9 arch/tile: clean up tile-specific PTRACE_SETOPTIONS
Use the newer idioms for setting PTRACE_O_xxx and PT_TRACE_xxx flags.
Only set/clear tile-specific flags if the generic routine returns
success, since otherwise we want to avoid setting any flags at all.
Atomically update the ptrace flags with the new values.  Eliminate
the PT_TRACE_MASK_TILE bitmask and just shift PTRACE_O_MASK_TILE.
Add a BUILD_BUG_ON to avoid overlapping with generic bits.

Acked-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-12-14 12:56:54 -05:00
Eunchul Kim
f264638065 drm/exynos: add gsc ipp driver
This patch adds IPP subsystem-based gsc driver for exynos5 series.
GSC is stand for General SCaler and supports the following features:
- image scaler/rotator/crop/flip/csc and input/output DMA operations.
- image rotation and image effect functions.
- writeback and display output operations.
- M2M operation to crop, scale, rotation and csc.

The below is GSC hardware path:
Memory------->GSC------>Memory
FIMD--------->GSC------>HDMI
FIMD--------->GSC------>Memory
Memory------->GSC------>FIMD, Mixer

This driver is registered to IPP subsystem framework to be used by user side
and user can control the GSC hardware through some interfaces of IPP subsystem
framework.

Changelog v1 ~ v5:
- added comments, code fixups and cleanups.

Signed-off-by: Eunchul Kim <chulspro.kim@samsung.com>
Signed-off-by: Jinyoung Jeon <jy0.jeon@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin.park <kyungmin.park@samsung.com>
2012-12-15 02:40:00 +09:00
Eunchul Kim
bea8a429d9 drm/exynos: add rotator ipp driver
This patch adds IPP subsystem-based rotator driver.
And Rotator supports the following features.
- Image crop operation support.
- Rotate operation support to 90, 180 or 270 degree.
- Flip operation support to vertical, horizontal or both.
  . as limitaions, the pixel format to source buffer should be
    same as the one to destination buffer and no scaler.

This driver is registered to IPP subsystem framework to be used by user side
and user can control the Rotator hardware through some interfaces of IPP
subsystem framework.

Changelog v6:
- fix build warning.

Changelog v1 ~ v5:
- added comments, code fixups and cleanups.

Signed-off-by: Eunchul Kim <chulspro.kim@samsung.com>
Signed-off-by: Youngjun Cho <yj44.cho@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-12-15 02:39:41 +09:00
Eunchul Kim
16102edb49 drm/exynos: add fimc ipp driver
FIMC is stand for Fully Interfactive Mobile Camera and
supports image scaler/rotator/crop/flip/csc and input/output DMA operations
and also supports writeback and display output operations.

This driver is registered to IPP subsystem framework to be used by user side
and user can control the FIMC hardware through some interfaces of IPP subsystem
framework.

Changelog v6:
- fix build warning.

Changelog v1 ~ v5:
- add comments, code fixups and cleanups.

Signed-off-by: Eunchul Kim <chulspro.kim@samsung.com>
Signed-off-by: Jinyoung Jeon <jy0.jeon@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-12-15 02:38:53 +09:00
Eunchul Kim
c12e2617b2 drm/exynos: add iommu support for ipp
This patch adds iommu support for IPP subsystem framework.
For this, it adds subdrv_probe/remove callback to enable or
disable ipp iommu.
We can get or put device address to a gem handle from user
through exynos_drm_gem_get/put_dma_addr().

Signed-off-by: Eunchul Kim <chulspro.kim@samsung.com>
Signed-off-by: Jinyoung Jeon <jy0.jeon@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-12-15 02:29:08 +09:00
Eunchul Kim
cb471f14b5 drm/exynos: add ipp subsystem
This patch adds Image Post Processing(IPP) support for exynos drm driver.

IPP supports image scaler/rotator and input/output DMA operations
using IPP subsystem framework to control FIMC, Rotator and GSC hardware
and supports some user interfaces for user side.

And each IPP-based drivers support Memory to Memory operations
with various converting. And in case of FIMC hardware, it also supports
Writeback and Display output operations through local path.

Features:
- Memory to Memory operation support.
- Various pixel formats support.
- Image scaling support.
- Color Space Conversion support.
- Image crop operation support.
- Rotate operation support to 90, 180 or 270 degree.
- Flip operation support to vertical, horizontal or both.
- Writeback operation support to display blended image of FIMD fifo on screen

A summary to IPP Subsystem operations:
First of all, user should get property capabilities from IPP subsystem
and set these properties to hardware registers for desired operations.
The properties could be pixel format, position, rotation degree and
flip operation.

And next, user should set source and destination buffer data using
DRM_EXYNOS_IPP_QUEUE_BUF ioctl command with gem handles to source and
destinition buffers.

And next, user can control user-desired hardware with desired operations
such as play, stop, pause and resume controls.

And finally, user can aware of dma operation completion and also get
destination buffer that it contains user-desried result through dequeue
command.

IOCTL commands:
- DRM_EXYNOS_IPP_GET_PROPERTY
  . get ipp driver capabilitis and id.
- DRM_EXYNOS_IPP_SET_PROPERTY
  . set format, position, rotation, flip to source and destination buffers
- DRM_EXYNOS_IPP_QUEUE_BUF
  . enqueue/dequeue buffer and make event list.
- DRM_EXYNOS_IPP_CMD_CTRL
  . play/stop/pause/resume control.

Event:
- DRM_EXYNOS_IPP_EVENT
  . a event to notify dma operation completion to user side.

Basic control flow:
Open -> Get properties -> User choose desired IPP sub driver(FIMC, Rotator
or GSCALER) -> Set Property -> Create gem handle -> Enqueue to source and
destination buffers -> Command control(Play) -> Event is notified to User
-> User gets destinition buffer complated -> (Enqueue to source and
destination buffers -> Event is notified to User) * N -> Queue/Dequeue to
source and destination buffers -> Command control(Stop) -> Free gem handle
-> Close

Changelog v1 ~ v5:
- added comments, code fixups and cleanups.

Signed-off-by: Eunchul Kim <chulspro.kim@samsung.com>
Signed-off-by: Jinyoung Jeon <jy0.jeon@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-12-15 02:29:08 +09:00
Joonyoung Shim
d636ead86f drm/exynos: support device tree for fimd
This adds the of_match_table to exynos-drm fimd driver to be probed from
the device tree.

Changelog v2:
- fix build error without CONFIG_OF.

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-12-15 02:28:40 +09:00
Tony Lindgren
bce9e90fc6 Merge branch 'fixes-timer-build' of git://github.com/jonhunter/linux into omap-for-v3.8/fixes-for-merge-window
Pull timer fixes from Jon Hunter <jon-hunter@ti.com>:

Fixes for a few timer warnings observed with different kernel
configurations for OMAP2+ devices.

I have dropped the patch to fix a build error for OMAP4 in the
timer code as Olof already has this fix merged.
2012-12-14 09:10:23 -08:00
Vaibhav Hiremath
bf85f205d9 ARM: OMAP2+: Fix sparse warnings in timer.c
Sparse generates the following warnings when compiling mach-omap2/timer.c.

  CHECK   arch/arm/mach-omap2/timer.c
  arch/arm/mach-omap2/timer.c:193:13: warning: symbol 'omap_dmtimer_init'
  was not declared. Should it be static?
  arch/arm/mach-omap2/timer.c:213:12: warning: symbol
  'omap_dm_timer_get_errata' was not declared. Should it be static?

Add static to function declaration to fix warnings.

Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: Jon Hunter <jon-hunter@ti.com>
2012-12-14 10:14:55 -06:00
Jon Hunter
e0c3e27ce1 ARM: AM335x: Fix warning in timer.c
When compiling the kernel with configuration options ...

 # CONFIG_ARCH_OMAP2 is not set
 # CONFIG_ARCH_OMAP3 is not set
 # CONFIG_ARCH_OMAP4 is not set
 # CONFIG_SOC_OMAP5 is not set
 CONFIG_SOC_AM33XX=y

 ... the following build warning is seen.

  CC      arch/arm/mach-omap2/timer.o
  arch/arm/mach-omap2/timer.c:395:19: warning: ‘omap2_sync32k_clocksource_init’
  	defined but not used [-Wunused-function]

This issue was introduced by commit 6f80b3b (ARM: OMAP2+: timer: remove
CONFIG_OMAP_32K_TIMER) where the omap2_sync32k_clocksource_init() is no
longer referenced by the timer initialisation function for the AM335x
device as it has no 32k-sync timer.

Fix this by adding the "__maybe_unused" compiler directive to the
omap2_sync32k_clocksource_init() function to indicate that this function
may be used for certain configurations.

Cc: Igor Grinberg <grinberg@compulab.co.il>

Signed-off-by: Jon Hunter <jon-hunter@ti.com>
2012-12-14 10:14:50 -06:00
Jon Hunter
34cceb7464 ARM: OMAP2+: Fix realtime_counter_init warning in timer.c
In commit fa6d79d (ARM: OMAP: Add initialisation for the real-time
counter), the function realtime_counter_init() was added. However, if
the kernel configuration option CONFIG_SOC_OMAP5 is not selected then
the following compiler warning is observed.

  CC      arch/arm/mach-omap2/timer.o
  arch/arm/mach-omap2/timer.c:489:20: warning: ‘realtime_counter_init’
  defined but not used [-Wunused-function]

Commit fa6d79d also introduced the kernel configuration option
CONFIG_SOC_HAS_REALTIME_COUNTER. If this option is not selected then the
a stub function for realtime_counter_init() is defined.

For non-OMAP5 devices, there is no realtime counter and so
realtime_counter_init() function and stub function are not used for
these devices. Therefore, fix this warning by only allowing the kernel
configuration option CONFIG_SOC_HAS_REALTIME_COUNTER to be enabled for
OMAP5 devices.

Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>

Reported-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Jon Hunter <jon-hunter@ti.com>
Acked-by Santosh Shilimkar <santosh.shilimkar@ti.com>
2012-12-14 10:14:16 -06:00
Dave Airlie
dd54fee7d4 radeon: fix regression with eviction since evict caching changes
Since 0d0b3e7443
drm/radeon: use cached memory when evicting for vram on non agp

evicting from TTM would try and evict to TTM instead of system,
not so good.

This should fix:
https://bugs.freedesktop.org/show_bug.cgi?id=58272

Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-12-14 10:45:28 -05:00
Alex Deucher
9d89d78e3a drm/radeon: add more pedantic checks in the CP DMA checker
non-mem-to-mem transfers require dw aligned byte count.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-12-14 10:45:28 -05:00
Alex Deucher
8696e33f06 drm/radeon: bump version for CS ioctl support for async DMA
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-12-14 10:45:27 -05:00
Alex Deucher
278a334cbc drm/radeon: enable the async DMA rings in the CS ioctl
This enables the functionality added in the previous
patches.  Userspace acceleration drivers can use the
CS ioctl to submit command buffers to the async DMA
rings.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-12-14 10:45:26 -05:00
Alex Deucher
cd459e525f drm/radeon: add VM CS parser support for async DMA on cayman/TN/SI
Allows us to use async DMA from userspace.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-12-14 10:45:26 -05:00
Alex Deucher
d2ead3eaf8 drm/radeon/kms: add evergreen/cayman CS parser for async DMA (v2)
Allows us to use the DMA ring from userspace.
DMA doesn't have a good NOP packet in which to embed the
reloc idx, so userspace has to add a reloc for each
buffer used and order them to match the command stream.

v2: fix address bounds checking

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-12-14 10:45:25 -05:00
Alex Deucher
cf4ccd016b drm/radeon/kms: add 6xx/7xx CS parser for async DMA (v2)
Allows us to use the DMA ring from userspace.
DMA doesn't have a good NOP packet in which to embed the
reloc idx, so userspace has to add a reloc for each
buffer used and order them to match the command stream.

v2: fix address bounds checking, reloc indexing

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-12-14 10:45:25 -05:00
Jerome Glisse
4ac0533aba drm/radeon: fix htile buffer size computation for command stream checker
Fix the size computation of the htile buffer.

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-12-14 10:45:24 -05:00
Daniel Vetter
9af2079212 drm/radeon: fix fence locking in the pageflip callback
We need to hold bdev->fence_lock while grabbing a reference to
the fence, to prevent concurrent clearing/changing of the
ttm_bo->sync_obj field.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-12-14 10:45:23 -05:00
Daniel Vetter
2c385151ed drm/radeon: make indirect register access concurrency-safe
With the new per-crtc locking mutliple set-cursor calls could happen
in parallel. Out of sheer paranoia I've opted for an irqsave spinlock.
But if there's indeed an access from interrupt contexts to these regs
it's already broken with the old code, so this can likely just be
reduced to a normal spinlock. Otoh the pageflip completion happens
from the vblank irq handler ...

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-12-14 10:45:23 -05:00
Daniel Vetter
2ef9bdfe64 drm/radeon: add W|RREG32_IDX for MM_INDEX|DATA based mmio accesss
Just refactoring to make the next patche simpler. Now all indirect register
access in the new modesetting driver should go through the r100_mm_(w|r)reg
fucntions.

RADEON_READ_MM from the old driver seems to be totally unused, so just kill
it.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-12-14 10:45:22 -05:00
Linus Torvalds
17bc14b767 Revert "sched: Update_cfs_shares at period edge"
This reverts commit f269ae0469.

It turns out it causes a very noticeable interactivity regression with
CONFIG_SCHED_AUTOGROUP (test-case: "make -j32" of the kernel in a
terminal window, while scrolling in a browser - the autogrouping means
that the two end up in separate cgroups, and the browser should be
smooth as silk despite the high load).

Says Paul Turner:
 "It seems that the update-throttling on the wake-side is reducing the
  interactive tasks' ability to preempt.  While I suspect the right
  longer term answer here is force these updates only in the
  cross-cgroup case; this is less trivial.  For this release I believe
  the right answer is either going to be a revert or restore the updates
  on the enqueue-side."

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Bisected-by: Mike Galbraith <efault@gmx.de>
Acked-by: Paul Turner <pjt@google.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-14 07:20:43 -08:00
Jeff Garzik
72d5f2da2c sata_dwc_460ex: remove file exec bit (chmod 0755 -> 0644)
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-12-14 09:43:39 -05:00
Xiaotian Feng
26cd4d65de [libata] fix Null pointer dereference on disk error
Following oops were observed when disk error happened:

[ 4272.896937] sd 0:0:0:0: [sda] Unhandled error code
[ 4272.896939] sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[ 4272.896942] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 00 5a de a7 00 00 08 00
[ 4272.896951] end_request: I/O error, dev sda, sector 5955239
[ 4291.574947] BUG: unable to handle kernel NULL pointer dereference at (null)
[ 4291.658305] IP: [] ahci_activity_show+0x1/0x40
[ 4291.730090] PGD 76dbbc067 PUD 6c4fba067 PMD 0
[ 4291.783408] Oops: 0000 [#1] SMP
[ 4291.822100] last sysfs file: /sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/sw_activity
[ 4291.934235] CPU 9
[ 4291.958301] Pid: 27942, comm: hwinfo ......

ata_scsi_find_dev could return NULL, so ata_scsi_activity_{show,store} should check if atadev is NULL.

Signed-off-by: Xiaotian Feng <dannyfeng@tencent.com>
Cc: James Bottomley <JBottomley@Parallels.com>
Cc: stable@kernel.org
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-12-14 09:40:34 -05:00
Wei Yongjun
39f80acb9f ahci: convert ata_link_printk() to ata_link_warn()
Using ata_link_warn() instead of ata_link_printk().

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-12-14 09:38:50 -05:00
Wei Yongjun
22c8be3144 pata_imx: convert ata_dev_printk() to ata_dev_info()
Using ata_dev_info() instead of ata_dev_printk().

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-12-14 09:38:46 -05:00
Wei Yongjun
99da09fcc5 ARM: ep93xx: convert ata_<foo>_printk() to ata_<foo>_<level>()
Using ata_<foo>_<level>() instead of ata_<foo>_printk().

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-12-14 09:38:42 -05:00
Brian Norris
071d3ad374 ahci_platform: make structs static
These structs are used only for ahci_platform.c, so they should be
static. Thanks to Fengguang for the (automated) suggestion.

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-12-14 09:38:17 -05:00
Jeff Garzik
11ace0c1de Revert "pata_octeon_cf: perform host detach, removal on exit"
This reverts commit 1645bf1b51.

Brian Norris writes:
  > David Daney writes:

  > I can seem to find it.  Without knowing what that does, I would be inclined
  > to NACK the whole thing.

  A NACK is probably the right thing. I was mostly converting a few
  other drivers which used some simple, common patterns to use my new
  common code, but this driver was missing it altogether. It looks like
  there may be bigger issues, though, as you point out.

  > This patch is likely to be incomplete as the driver is also missing the
  > module_exit() things.
  >
  > It might be simpler to just make the driver "bool" instead of "tristate" in
  > the Kconfig.

  As noted earlier, I don't have much interest in this driver. I agree
  that there are some other issues with the driver; I think it leaks
  memory if it is ever allowed to unload, for one. Feel free to submit
  an alternative patch to prevent this driver from being built as a
  module.

Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-12-14 09:35:51 -05:00
Jeff Garzik
8349e5aeaa Revert "libata: check SATA_SETTINGS log with HW Feature Ctrl"
This reverts commit de90cd71f6.

Shane Huang writes:

  Please suspend this patch because I just received two new
  DevSlp drives but found word 78 bit 5 is _not_ set.

  I'm checking with the drive vendor whether he gave me
  the wrong information. If bit 5 is not the necessary and
  sufficient condition, I will implement another patch to
  replace ata_device->sata_settings into ->devslp_timing.

Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-12-14 09:34:01 -05:00
Hiroshi Doyu
c6ba8d06ec scripts/config: Fix wrong "shift" for --keep-case
Remove wrong "shift" for --keep-case. There is always "shift" at
beginning of while-loop. No need "shift" at --keep-case just before
"continue" to process next argument.

Now the following works as expected:

./scripts/config -e aAa -k -e bBb -e cCc && tail -3 .config
CONFIG_AAA=y
CONFIG_bBb=y
CONFIG_cCc=y

Signed-off-by: Hiroshi Doyu <hdoyu@nvidia.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2012-12-14 14:16:10 +01:00
Damien Lespiau
3f8c65d604 drm/i915: Remove stale comment about intel_dp_detect()
The function doesn't use any of the registers mentioned, nor does it
return true or false. Hard to do worse. Remove it, the function is
absolutely descriptive enough to not need any comment.

Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-12-14 11:20:00 +01:00
Damien Lespiau
c36346e302 drm/i915: Implement ibx_digital_port_connected() for IBX
CPT+ PCHs have different bit definition to read the HPD live status. I
don't have an ILK with digital ports handy, which is why this patch is
separate from the CPT+ implementation. If the docs don't lie, it should
all be fine though.

Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-12-14 11:19:34 +01:00
Damien Lespiau
577c7a505b drm/i915/dp: Log the DPCD only if we have successfully retrieved one
Moving the DPCD just after a successful read will allow to:
  - log all DPCD reads (eDP ones, changes signalled by HPD IRQ)
  - don't log it if we haven't been able to read it

v2: Be sure to log the DPCD when a downstream port does not have HPD
    support and the branch device asserts HPD (Jani Nikula)

Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-12-14 11:17:44 +01:00
Boaz Harrosh
861d66601a exofs: don't leak io_state and pages on read error
Same bug as fixed by Idan for write_exec was in read_exec.
Fix the io_state leak and pages state on read error.

Also while at it:
The if (!pcol->read_4_write) at the error path is redundant
because all goto err; are after the if (pcol->read_4_write)
bale out.

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2012-12-14 12:17:32 +02:00
Damien Lespiau
1b4696394a drm/i915/dp: Read the HPD status before trying to read the DPCD
Just like:

  Author: Damien Lespiau <damien.lespiau@intel.com>
  Date:   Wed Dec 12 19:37:22 2012 +0000

      drm/i915/hdmi: Read the HPD status before trying to read the EDID

But this time for DiplayPort.

v2: Adapt to the ibx_ name change and don't add commit hash (Chris
Wilson, Jani Nikula)

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-12-14 11:17:15 +01:00
Damien Lespiau
b0ea7d37a8 drm/i915/hdmi: Read the HPD status before trying to read the EDID
If you unplug the hdmi connector slowly enough, the hotplug interrupt
fires but then the kernel code tries to read the EDID and succeeds
(because the connector is still half connected, the HPD pin is shorter
than the others, and DDC works). Since EDID succeeds it thinks the
monitor is still connected.

To prevent that, read the live HPD status in the hotplug handler before
trying to read the EDID.

v2: Rename the function to ibx_ (Chris Wilson)

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=55372
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-12-14 11:12:58 +01:00
Damien Lespiau
b696519e51 drm/i915: Cleanup SHOTPLUG_CTL status bits definitions
Those status bits don't follow the usual pattern: _MASK (those bits are
write 1 to clear, useful to select the value we want to read) and the
values shifted by the same amount.

Cleaned that that up when poking at the register for testing purposes,
might as well upstream that cleanup.

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-12-14 11:12:03 +01:00
Takashi Iwai
6169b67361 ALSA: hda - Always turn on pins for HDMI/DP
We've seen the broken HDMI *video* output on some machines with GM965,
and the debugging session pointed that the culprit is the disabled
audio output pins.  Toggling these pins dynamically on demand caused
flickering of HDMI TV.

This patch changes the behavior to keep the pin ON constantly.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=51421

Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-14 10:27:25 +01:00
Jan Glauber
d0b0885316 s390/pci: performance statistics and debug infrastructure
Add support for reading the PCI function measurement block counters
provided by the hypervisor. Add two s390 debug features, one for
critical errors and one for tracing and provide wrappers to log data.

Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-12-14 10:01:17 +01:00
Jiri Kosina
8ab726c183 HID: remove x bit from sensor doc
Reported-by: Xose Vazquez Perez <xose.vazquez@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-12-14 08:48:59 +01:00
Joonyoung Shim
20e8ac3eea pwm: samsung: add missing s3c->pwm_id assignment
The s3c->pwm_id is used to calculate offset of related register.

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-12-14 08:32:58 +01:00
Joonyoung Shim
ca555e5ab7 drm/exynos: support extended screen coordinate of fimd
The fimd of exynos5 SoC supports extended screen coordinate.

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2012-12-14 15:54:39 +09:00
Joonyoung Shim
f56aad3a69 drm/exynos: fix x, y coordinates for right bottom pixel
The x, y coordinates of right bottom pixel cannot be negative numbers.

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2012-12-14 15:54:36 +09:00
Joonyoung Shim
60a705a9f9 drm/exynos: fix fb offset calculation for plane
There is no any reason to change fb offset when CRTC is out of screen.
Also, this fixes a typing error.

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2012-12-14 15:54:34 +09:00
Sachin Kamat
1a4513b344 drm/exynos: hdmi: Fix potential NULL pointer dereference error
This is an unlikely case. However to silence the following smatch error
add a NULL check:
drivers/gpu/drm/exynos/exynos_hdmi.c:2486 hdmi_probe()
error: potential NULL dereference 'match'.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2012-12-14 15:40:50 +09:00
Sachin Kamat
65da035077 drm/exynos: hdmi: Add CONFIG_OF and use of_match_ptr() macro
Add CONFIG_OF to compile conditionally. of_match_ptr eliminates having
an #ifdef returning NULL for the case when OF is disabled.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2012-12-14 15:40:50 +09:00
Rahul Sharma
a55622570d drm/exynos: add support for hdmiphy power control for exynos5
This patch adds support for controlling power of hdmi phy for
exynos5 soc. A special bit is provided in exynos5 for directly
switching of PHY while in exynos4, phy power needs to be controlled
through i2c settings. I2C configuration may affect the suspend to
resume and wake-up time requirements hence not added.

Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2012-12-14 15:40:49 +09:00
Rahul Sharma
000f13083d drm/exynos: add runtime pm support for mixer
This patch adds support for runtime power management for
drm mixer driver.

Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com>
Signed-off-by: Shirish S <s.shirish@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2012-12-14 15:40:48 +09:00