Commit graph

361,649 commits

Author SHA1 Message Date
Borislav Petkov
10de6497a5 amd64_edac: Fix csrows size and pages computation
Make sure code pays attention to K8 having only one DCT, reformat and
cleanup code, correct debug messages, remove unused code.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2012-11-28 11:47:36 +01:00
Borislav Petkov
0a5dfc3140 amd64_edac: Use DBAM_DIMM macro
Instead of open-coding it, use the DBAM_DIMM macro in
amd64_csrow_nr_pages() which we have already.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2012-11-28 11:46:19 +01:00
Borislav Petkov
bb89f5a054 amd64_edac: Fix K8 chip select reporting
This basically reverts 603adaf6b3 ("amd64_edac: fix K8 chip select
reporting") because it was a clumsy workaround for DIMM sizes reporting
on K8 which got superceded by a much more correct one with 41d8bfaba7
("amd64_edac: Improve DRAM address mapping") without removing the prior
one. Remove it now finally.

Reported-by: Josh Hunt <johunt@akamai.com>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2012-11-28 11:45:46 +01:00
Borislav Petkov
33ca0643c9 amd64_edac: Reorganize error reporting path
Rewrite CE/UE paths so that they use the same code and drop additional
code duplication in handle_ue. Add a struct err_info which collects
required info for the error reporting. This, in turn, helps slimming all
edac_mc_handle_error() calls down to one.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2012-11-28 11:45:34 +01:00
Borislav Petkov
c8d1adf092 amd64_edac: Do not check whether error address is valid
All families report a valid error address when encountering a DRAM ECC
error so no need to check it.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2012-11-28 11:45:11 +01:00
Borislav Petkov
66fed2d464 amd64_edac: Improve error injection
When injecting DRAM ECC errors over the F3xB[8,C] interface, the machine
does this by injecting the error in the next non-cached access. This
takes relatively long time on a normal system so that in order for us to
expedite it, we disable the caches around the injection.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2012-11-28 11:45:01 +01:00
Borislav Petkov
6e71a870b8 amd64_edac: Cleanup error injection code
Invert kstrtoul return value testing and win one indentation level.
Also, shorten up macro names so that the lines can fit into 80 cols. No
functional change.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2012-11-28 11:44:35 +01:00
Borislav Petkov
1f31677e0d amd64_edac: Small fixlets and cleanups
amd64_get_dram_hole_info: remove local variable 'base'.
sys_addr_to_dram_addr: do not clear local variable 'ret'. Also, sanitize
constants formatting.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2012-11-28 11:44:12 +01:00
Shubhrajyoti D
972deb4f49 i2c: omap: Remove the OMAP_I2C_FLAG_RESET_REGS_POSTIDLE flag
The OMAP_I2C_FLAG_RESET_REGS_POSTIDLE is not used anymore
in the i2c driver. Remove the flag.

Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-11-28 11:36:32 +01:00
Daniel Vetter
28164fdad8 drm/doc: add new dp helpers into drm DocBook
I didn't bother with documenting the really trivial new "extract
something from dpcd" helpers, but the i2c over aux ch is now
documented a bit.

v2: Clarify the comment for i2c_dp_aux_add_bus a bit.

v3: Fix more spelling fail spotted by Laurent Pinchart.

Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-11-28 20:26:53 +10:00
Daniel Vetter
d0ddc0338a drm/doc: integrate fb helper reference into docs
Again only minimal changes to make kerneldoc no longer shout. Plus a
little introduction in the form of a inline DOC: section to quickly
explain what this is all about.

v2: Fixup spelling fail.

Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-11-28 20:26:52 +10:00
Borislav Petkov
f430d5707a EDAC: Handle empty msg strings when reporting errors
A reported error could look like this

[  226.178315] EDAC MC0: 1 CE  on mc#0csrow#0channel#0 (csrow:0 channel:0 page:0x427c0d offset:0xde0 grain:0 syndrome:0x1c6)

with two spaces back-to-back due to the msg argument of
edac_mc_handle_error being passed on empty by the specific drivers.
Handle that.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2012-11-28 11:24:12 +01:00
Borislav Petkov
4da1b7bfe7 EDAC: Remove useless assignment of error type
The tracepoint decodes the error type later anyway so remove a useless
assignment to the temporary p which gets overwritten later anyway.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2012-11-28 11:23:50 +01:00
Borislav Petkov
37929874d4 EDAC: Boundary-check edac_debug_level
Only levels [0:4] are allowed so enforce that. Also, while at it,
massage Kconfig text and add valid debug levels range to the module
parameter description.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2012-11-28 11:23:32 +01:00
Borislav Petkov
876bb331e2 EDAC: Respect operational state in edac_pci.c
Currently, we unconditionally enable PCI polling and we don't look at
the edac_op_state module parameter. Make this dependent on the parameter
setting supplied on the command line.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2012-11-28 11:22:47 +01:00
Daniel Vetter
0d4ed4c8f9 drm/doc: integrate crtc helper api into docbook
- Add the missing doc for drm_helper_move_panel_connectors_to_head.
- Fixup any outdated stuff in existing sections. I've only looked at
  those kerneldoc headers that actually resulted in a complaint from
  the kerneldoc parser tool.

v2:
- Actually include the docbook snippet in the right patch.
- Fix spelling fail.

v3: It's now called drm_crtc_helper_set_mode, spotted by Laurent
Pinchart.

Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-11-28 20:19:58 +10:00
Daniel Vetter
e4949f2974 drm/doc: Helpers are not a Midlayer!
I'm devoting all my wrath to that fight, so don't misname it ;-)

v2: Make it clear that this section talks about kms helpers.

Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-11-28 20:17:07 +10:00
Daniel Vetter
670c1ef650 drm/edid: tune down debug message in parse_hdmi_vsdb
Those tend to be totally not interesting for end-users, and for
debugging we tend to dump the entire noise anyway by enabling all
debug messages.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=57388
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-11-28 20:15:12 +10:00
James Hogan
dff98e529e drm: only build ati_pcigart if PCI enabled
Prevent ati_pcigart.c being built unless PCI is enabled. The exported
functions in this file are only used by drivers which depend on PCI
(namely r128 and radeon), and it tries to use PCI specific functions
(pci_unmap_page, pci_map_page, and pci_dma_mapping_error) that cause
compiler errors when PCI is disabled.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-11-28 20:12:29 +10:00
Thomas Hellstrom
d08a9b9cd8 drm/vmwgfx: Tighten the security around buffer maps
Make sure that other DRM clients can't map the contents of
non-shareable buffer objects.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-11-28 20:09:08 +10:00
Thierry Reding
219e81536c drm: tegra: Add Tegra30 support
Add support for host1x, the display controllers and HDMI on the Tegra30
SoC.

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Tested-by: Stephen Warren <swarren@nvidia.com>
Tested-by: Mark Zhang <markz@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-11-28 20:07:02 +10:00
Thierry Reding
ac8f7c4894 drm: tegra: Use framebuffer pitch as line stride
Instead of using the stride derived from the display mode, use the pitch
associated with the currently active framebuffer. This fixes a bug where
the LCD display content would be skewed when enabling HDMI with a video
mode different from that of the LCD.

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Tested-by: Terje Bergstrom <tbergstrom@nvidia.com>
Tested-by: Mark Zhang <markz@nvidia.com>
Tested-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-11-28 20:05:46 +10:00
Will Deacon
ea3aacf5f2 ARM: 7586/1: sp804: set cpumask to cpu_possible_mask for clock event device
The SP804 driver statically initialises the cpumask of the clock event
device to be cpu_all_mask, which is derived from the compile-time
constant NR_CPUS. This breaks SMP_ON_UP systems where the interrupt
controller handling the sp804 doesn't have the irq_set_affinity callback
on the irq_chip, because the common timer code fails to identify the
device as cpu-local and ends up treating it as a broadcast device
instead.

This patch fixes the problem by using cpu_possible_mask at runtime,
which will correctly represent the possible CPUs when SMP_ON_UP is being
used.

Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-11-28 09:46:57 +00:00
Eliad Peller
847cbebd52 wlcore: don't stop fwlog if dbgpins are used
Due to a bug, the fw asserts on fw log stop when dbg-pins are used.
Don't stop the fw log in this case.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-11-28 11:45:43 +02:00
Arik Nemtsov
5f9b67770b wlcore: use new set bandwidth command to adjusting channel BW
We support changing the channel BW when we started the STA role on
a 40Mhz bandwidth. Otherwise a reconnection is required.
Save the started channel width and use it when channel width updates
arrive.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-11-28 11:45:42 +02:00
Eliad Peller
7c482c1040 wlcore: configure dwell times according to scan type
Allow configuring different dwell times to the different
scan types (regular and scheduled).

Add new configuration entry (dwell_time_dfs) to
conf_scan_settings, in order to allow setting
different values for normal scan and scheduled scan.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-11-28 11:45:42 +02:00
Eliad Peller
6507babab4 wl18xx: make driver operational again
we have done updating the driver to the new fw
api, so make the driver operational again.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-11-28 11:41:45 +02:00
Eliad Peller
1019975640 wlcore: call ieee80211_sched_scan_stopped on interface removal
The interface might go down before we got the SCHED_STOPPED
event, so make sure to call ieee80211_sched_scan_stopped()
if the scanned interface is removed.

Replace sched_scanning with sched_vif in order to save
the scanned interface.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-11-28 11:41:44 +02:00
Victor Goldenshtein
6b70e7eb70 wlcore: add new reg-domain configuration command
In 18xx the calibration process of the PHY Cortex domain
requires to perform an active calibration of the channel
before it can be used for transmission. To fulfill world
wide regulatory restrictions, fw should be always
synchronized/updated with current CRDA configuration.
Add a new "CMD_DFS_CHANNEL_CONFIG" command to update the
fw with current reg-domain, this command passes a bit map
of channels that are allowed to be used for transmission.

The driver shall update the fw during initialization and
after each change in the current reg-domain
configuration. The driver will save the channel number of
incoming beacons during the scan process, as they might
be a result of the passive scan on
"IEEE80211_CHAN_PASSIVE_SCAN" channel and will update the
fw accordingly once the scan is finished, the purpose of
this is to be ready in case of the authentication request
on one of these disabled (uncalibrated) channels.

The new command requires to wait for the fw completion
event "DFS_CHANNELS_CONFIG_COMPLETE_EVENT".

No scan commands (including the sched scan) can be
executed concurrently with the "CMD_DFS_CHANNEL_CONFIG",
wl->mutex ensures that.

[Arik - move reset of reg_ch_conf_last to safe place inside
op_stop_locked]
[Eliad - adjust to new event waiting api]

Signed-off-by: Victor Goldenshtein <victorg@ti.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-11-28 11:41:43 +02:00
Mauro Carvalho Chehab
d033a308d8 Merge remote-tracking branch 'linus/master' into staging/for_v3.8
* linus/master: (1428 commits)
  futex: avoid wake_futex() for a PI futex_q
  watchdog: using u64 in get_sample_period()
  writeback: put unused inodes to LRU after writeback completion
  mm: vmscan: check for fatal signals iff the process was throttled
  Revert "mm: remove __GFP_NO_KSWAPD"
  proc: check vma->vm_file before dereferencing
  UAPI: strip the _UAPI prefix from header guards during header installation
  include/linux/bug.h: fix sparse warning related to BUILD_BUG_ON_INVALID
  Linux 3.7-rc7
  powerpc/eeh: Do not invalidate PE properly
  ALSA: hda - Fix build without CONFIG_PM
  of/address: sparc: Declare of_iomap as an extern function for sparc again
  PM / QoS: fix wrong error-checking condition
  bnx2x: remove redundant warning log
  vxlan: fix command usage in its doc
  8139cp: revert "set ring address before enabling receiver"
  MPI: Fix compilation on MIPS with GCC 4.4 and newer
  MIPS: Fix crash that occurs when function tracing is enabled
  MIPS: Merge overlapping bootmem ranges
  jbd: Fix lock ordering bug in journal_unmap_buffer()
  ...
2012-11-28 07:22:38 -02:00
Nicholas Bellinger
9474b04313 ib_srpt: Convert I/O path to target_submit_cmd + drop legacy ioctx->kref
This patch converts the main srpt_handle_cmd() I/O path to use modern
target_submit_cmd() with TARGET_SCF_ACK_KREF flag usage.  This includes
dropping the original internal ioctx->kref + srpt_put_send_ioctx() usage
in favor of target_put_sess_cmd() w/ se_cmd_t->cmd_kref within ib_srpt
response callbacks.

It also updates srpt_abort_cmd() to call target_put_sess_cmd() for
completion of aborted commands, and adds target_wait_for_sess_cmds() into
srpt_release_channel_work() to allow outstanding I/O to complete during
session shutdown.

Also, go ahead and update srpt_handle_tsk_mgmt() to make the remaining
transport_init_se_cmd() to setup the ioctx->cmd with se_tmr_req.

Cc: Christoph Hellwig <hch@lst.de>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Roland Dreier <roland@kernel.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-11-28 01:10:59 -08:00
Prarit Bhargava
42709efb3a i7core_edac: fix panic when accessing sysfs files
The i7core_edac addrmatch_dev and chancounts_dev have sysfs files
associated with them.  The sysfs files, however, are coded so that the
parent device is is the mci device.  This is incorrect and the mci struct
should be obtained through the addrmatch_dev and chancounts_dev device's
private data field which is populated in i7core_create_sysfs_devices().

Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-28 06:56:00 -02:00
Thomas Hellstrom
82fe50bcc8 drm/ttm: Optimize vm locking using kref_get_unless_zero v3
Removes the need for a write lock each time we call ttm_bo_unref().

v2: Remove an unused variable.
v3: Really remove the unused variable.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-11-28 18:37:59 +10:00
Thomas Hellstrom
5293908afa drm/ttm: Use the hashtab _rcu interface for ttm_objects
Also move a kref_init() out of spinlocked region

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-11-28 18:36:15 +10:00
Thomas Hellstrom
ae8df2ae8a drm/ttm: Fix locking in an error path
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-11-28 18:36:14 +10:00
Thomas Hellstrom
35f62a5829 drm/vmwgfx: Free user-space fence objects correctly
They need to be freed after an rcu grace period.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-11-28 18:36:12 +10:00
Thomas Hellstrom
a82b8db02f kref: Add kref_get_unless_zero documentation
Document how kref_get_unless_zero should be used and how it helps
solve a typical kref / locking problem.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-11-28 18:36:06 +10:00
Thomas Hellstrom
384cc2f968 drm: Add a hash-tab rcu-safe API
While hashtab should now be RCU-safe, Add a drm_ht_xxx_api for consumers
to use to make it obvious what locking mechanism is used.

Document the way the rcu-safe interface should be used.

Don't use rcu-safe list traversal in modify operations where we should use
a spinlock / mutex anyway.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-11-28 18:36:05 +10:00
Takashi Iwai
361dab3ec2 ALSA: hda - Call snd_array_init() early and only once
This is a preliminary patch for introducing a protection to access
races of snd_array instances.  Call snd_array_init() appropriately
at the initialization time and don't call it twice.

Also the allocations of codec-spec structs are cleaned up by helper
functions in patch_sigmatel.c and patch_analog.c.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-11-28 09:03:39 +01:00
Takashi Iwai
cdc83c59e5 ALSA: hda - Remove superfluous zero-clear memset in patch_ca0132.c
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-11-28 08:47:32 +01:00
Takashi Iwai
063bca0968 ALSA: hda - Fix NULL dereference in error path of patch_ca0132.c
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-11-28 08:47:29 +01:00
Ian Minett
e97249dd6d ALSA: hda - Remove unnecessary struct hda_stream_format from CA0132
Signed-off-by: Ian Minett <ian_minett@creativelabs.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-11-28 08:47:26 +01:00
Ian Minett
4861af8075 ALSA: hda - Update chipio functions and DSP write wait timeout
Tidy up and condense chipio_write_address|addx() functions.
Improve dspio_write_wait() to use jiffies for timeout calc.

Signed-off-by: Ian Minett <ian_minett@creativelabs.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-11-28 08:47:23 +01:00
Ian Minett
a3af4807fa ALSA: hda - Change return value for load_dsp_prepare() to -ENOSYS
Signed-off-by: Ian Minett <ian_minett@creativelabs.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-11-28 08:47:21 +01:00
Ian Minett
d5c21b88e8 ALSA: hda - Add comments and descriptions to CA0132 functions
Add comments and descriptions to functions.
Bump dsp_free_ports() to below dsp_allocate_ports_format() to group the
alloc functions together for commenting.

Signed-off-by: Ian Minett <ian_minett@creativelabs.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-11-28 08:47:18 +01:00
Ian Minett
c3b4eea262 ALSA: hda - Add firmware caching to CA0132 codec
Signed-off-by: Ian Minett <ian_minett@creativelabs.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-11-28 08:47:15 +01:00
Ian Minett
01ef7dbffb ALSA: hda - Update CA0132 codec to load DSP firmware binary
This patch adds the code needed to fetch the DSP binary image from the local
firmware install location and transfer it over to the chip using the new DSP
loader bus ops.
Actual DSP effect controls, parameters and mixers are to be included later.

- Add calls to new DSP loader system to transfer firmware to the hardware.
- Add chip read/write routines, DSP I/O, SCP packet format helper functions and
  transfer DMA management.
- Add guard around DSP download to ensure loader config switch is enabled.

The general scheme for downloading the DSP is as follows:
1) If DSP firmware loader is enabled, ca0132_download_dsp() is called
to start the process.
2) Driver requests DSP image using request_firmware().
3) Driver sets up the streaming DMA for DSP image download
with dspload_image() and dspxfr_image(), which in turn calls the DSP loader
op snd_hda_codec_load_dsp_prepare() to ready the system.
4) DSP image will consist of 1 or more segments, each transferred in sequence
by a call to dspxfr_one_seg() and snd_hda_codec_load_dsp_trigger().
5) Once complete, the loader state is cleaned up with
snd_hda_codec_load_dsp_cleanup().

Signed-off-by: Ian Minett <ian_minett@creativelabs.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-11-28 08:47:12 +01:00
Ian Minett
4aa3bb0c52 ALSA: hda - Add DSP firmware enums and defs to CA0132 codec
Signed-off-by: Ian Minett <ian_minett@creativelabs.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-11-28 08:47:09 +01:00
Ian Minett
bcd109c086 ALSA: hda - Add CA0132 register definitions file
Signed-off-by: Ian Minett <ian_minett@creativelabs.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-11-28 08:47:06 +01:00
Takashi Iwai
1d1a4564d8 ALSA: hda - Add new DSP loader callback routines
Pass DMA buffer pointers in calls to setup_bdle().
Add DSP loader callback routines to controller.
Add new DSP loader switch to Kconfig to turn off DSP firmware.

Signed-off-by: Ian Minett <ian_minett@creativelabs.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-11-28 08:47:03 +01:00