Commit graph

361,649 commits

Author SHA1 Message Date
Linus Torvalds
90cdb1a0e6 Merge branch 'for-3.7' of git://linux-nfs.org/~bfields/linux
Pull nfsd bugfixes from J Bruce Fields.

* 'for-3.7' of git://linux-nfs.org/~bfields/linux:
  SUNRPC: Prevent kernel stack corruption on long values of flush
  NLM: nlm_lookup_file() may return NLMv4-specific error codes
2012-10-19 11:00:00 -07:00
John W. Linville
06f40a41b8 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem 2012-10-19 13:55:42 -04:00
Ben Collins
d479c91178 USB: ehci-fsl: Return valid error in ehci_fsl_setup_phy
ehci_fsl_setup_phy is supposed to return an int, but had a void return
value in the case of controller_ver being invalid.

Introduced by commit 3735ba8db8 ("powerpc/usb: fix bug of CPU hang
when missing USB PHY clock"), which missed one return.

Signed-off-by: Ben Collins <ben.c@servergy.com>
Cc: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-19 10:54:30 -07:00
David S. Miller
1b6f0f9242 Merge branch 'at91'
Joachim Eastwood says;

====================
This patch series prepares the old at91_ether driver for code sharing
with the macb driver. The hardware is similar except for DMA TX/RX, so
its not quite clear if it is practical to support both in one
driver. But stuff like MDIO and statistics should be possible to
share.

Patch 1 adds some register defines and bits that is only found on
RM9200.

Patch 2-4 uses the register defines and access functions from the macb
header. These can be squashed if it cause too much churn.

Patch 5 merges the private at91_ether struct with the private macb
struct. This makes it easier to later share code with the macb. The
private macb struct becomes quite large, but most at91_ether specific
members are removed in later patches.

Patch 8 make macb compile when we select at91_ether. Is this approach
okey?

Patch 9 makes use of MDIO code from macb. This rips out the private
phy handling code in at91_ether. One thing that is lost is the
interrupt support for phy. But this should easy to add to macb which
will then benefit both drivers.

Patch 10 makes use of the macb_set_rx_mode from macb.

Patch 11-12 makes at91_ether share the rx dma struct members from
macb. Patch also moves the rx buffer allocation into netdev open and
dealloc into netdev close.

Last patch remove the now unused rm9200 emac header from include/mach.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-19 13:47:00 -04:00
Lars-Peter Clausen
8341dc04df iio:dac: Add support for the ad5449
This patch adds support for the AD5415, AD5426, AD5429, AD5432, AD5439, AD5443
and AD5449 single and dual channel DACs.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-10-19 18:46:51 +01:00
Lars-Peter Clausen
103d9fb907 iio: Add a logarithmic fractional value type
For ADCs or DACs the denominator for fractional types often is a power of two.
In this case we can use a shift operation instead of the rather expensive 64 bit
division. This patch adds a new fractional type which expects the denominator to
be specified as the log2 of the actual denominator. E.g. for ADCs and DACs this
will usually be the number of significant bits.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-10-19 18:46:51 +01:00
Lars-Peter Clausen
948ad20504 iio: Use strict_strtouint instead of kstrtoul
strict_strto* has been deprecated in favor of kstrto*. Use strict_strtouint
respective strict_strtoint, since that is what the functions we pass the
converted values to expect.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-10-19 18:46:50 +01:00
Chris Zankel
7216cabfff xtensa: add missing system calls to the syscall table
Add the following system calls to the syscall table:

fallocate
sendmmsg
umount2
syncfs
epoll_create1
inotify_init1
signalfd4
dup3
pipe2
timerfd_create
timerfd_settime
timerfd_gettime
eventfd2
preadv
pwritev
fanotify_init
fanotify_mark
process_vm_readv
process_vm_writev
name_to_handle_at
open_by_handle_at
sync_file_range
perf_event_open
rt_tgsigqueueinfo
clock_adjtime
prlimit64
kcmp

Note that we have to use the 'sys_sync_file_range2' version, so that
the 64-bit arguments are aligned correctly to the argument registers.

Signed-off-by: Chris Zankel <chris@zankel.net>
2012-10-19 10:46:44 -07:00
Lars-Peter Clausen
4525985949 iio: at91_adc: Use devm_kcalloc to allocate arrays
Use dev_kcalloc instead of devm_kzalloc to allocate arrays since it is
semantically more appropriate.

While we are at it the patch also fixes the following coccinelle warning:
	drivers/iio/adc/at91_adc.c:277:25-31: ERROR: application of sizeof to pointer

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-By: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-10-19 18:46:37 +01:00
Daniel Vetter
36ec8f8774 drm/i915: unconditionally use mt forcewake on hsw/ivb
Single-threaded forcewake was only used on some early pre-production
ivybridge machines, all the latest ones should use mt forcewake. And
we already assume this in other places of the code (e.g. DERRMR
support in the ddx, or the latest intel_gt_reset patch to reset any
lingering forcewake references left behind by the bios), so don't
bother here, too.

Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-10-19 19:32:36 +02:00
James Bottomley
6238559f0b UAPI Disintegration 2012-10-16
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAUH3EFBOxKuMESys7AQKOlg/+I/OdBI+PRVPI0owWTR+twbE40mqNql1B
 kAVt8D96APWjww5t+MQqCewjuuCt7ptcGaApfnHL5Nt/YIej4jr3VzVS2Qf/NcZJ
 7jIUZOhHXJzeh5f5JJJLfxYbqaFLp56gs63JLsAM+Q+mesnwuRiYbskoyboZSBSm
 +Dd1eqNfAuUY1aggRol47T+uj1Cv/sKEOI2y8PZPsUy5S57/aM2j6L3OwsPDl6gT
 7gVlxdsR03/qbdL/vCsfTFk7q6ZCO51+m4lubisO8pPe6kM018A8ck+ahGcV3tS8
 EqCZXaBS/mGAXoZHm20xBbGXfH6W7xgiCFkliUuc0BFkYx2YdSPT6azdoHyPtGJp
 7MNz6nRWH+GLJwYEQpI2GP89BHUa5bq48P5AOcZUDcajWBVGJVtPybeTHigWlAdF
 1Mvss/Yr5kYbmItNvUnW5juN9OrbEvs4AR4spDj7crQUXM9SqMFqFNFPM8IXvnNk
 s3iEnyofUZcneGx+Uaei9eB9vYdpktHkngtgzc9m1za91jWeeaTt9a4dDyALbhDV
 lPTfT2Rhe5sC86AOdBaRoeeBQADnr2t3P7wdgWCWfgrKDjS5wFzLKrZOOFoA2JLB
 1uCinOnIAEe0MOlPTlYO/tqH+2HFH12oBMwLbYHgen5hS7i2IIufLedrQ10zr47S
 7BstfOTxsdA=
 =bCQd
 -----END PGP SIGNATURE-----

Merge tag 'disintegrate-parisc-20121016' into for-linus

UAPI Disintegration 2012-10-16

Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-10-19 10:26:06 -07:00
Chris Zankel
39070cb8a3 xtensa: minor compiler warning fix
Fix two compiler warnings complaining about truncating a value on
a 64-bit host, and about declaring an unused variable that is only
used for a specific configuration.

Signed-off-by: Chris Zankel <chris@zankel.net>
2012-10-19 10:24:20 -07:00
Joachim Eastwood
4fa7fc10bc ARM: AT91: remove old RM9200 EMAC register definitions
This file is unused after at91_ether was converted to use macb.h

Signed-off-by: Joachim Eastwood <manabian@gmail.com>
2012-10-19 13:18:30 -04:00
Joachim Eastwood
6397346162 net/at91_ether: convert to devm_* functions
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
2012-10-19 13:18:30 -04:00
Joachim Eastwood
04879e5cb4 net/at91_ether: clean up rx buffer handling
This patch does two things:
* Use macb struct members and remove at91_ether ones
* Alloc DMA buffers on netdev start and dealloc on stop

Signed-off-by: Joachim Eastwood <manabian@gmail.com>
2012-10-19 13:18:29 -04:00
Joachim Eastwood
fbb7a6e7d4 net/at91_ether: use macb dma description struct
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
2012-10-19 13:18:29 -04:00
Joachim Eastwood
e0da1f144a net/at91_ether: share macb_set_rx_mode with macb
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
2012-10-19 13:18:29 -04:00
Joachim Eastwood
5e32353d31 net/at91_ether: use ethtool and mdio from macb
This rips out the at91_ether phy handling and ethtool stuff
and replace it with equivalent stuff from macb.

The only thing lost is the phy irq support from at91_ether,
but this can be added to macb and then benefit all users.

Signed-off-by: Joachim Eastwood <manabian@gmail.com>
2012-10-19 13:18:29 -04:00
Joachim Eastwood
0112a1dac5 net/at91_ether: compile macb for exported functions
Comile macb as well as at91_ether to access exported functions.

Signed-off-by: Joachim Eastwood <manabian@gmail.com>
2012-10-19 13:18:29 -04:00
Joachim Eastwood
0005f54102 net/macb: export some symbols for at91_ether
Export some symbols to start sharing code between
macb and at91_ether drivers.

Signed-off-by: Joachim Eastwood <manabian@gmail.com>
2012-10-19 13:18:29 -04:00
Joachim Eastwood
54f14e4b4d net/at91_ether: use pclk member instead of ether_clk
Remove old at91_priv member and use pclk member from macb.

Signed-off-by: Joachim Eastwood <manabian@gmail.com>
2012-10-19 13:18:29 -04:00
Joachim Eastwood
b85008b702 net/at91_ether/macb: absorb at91_private in to macb private struct
This will make it easier to share code between the drivers and
eventually merge them into one driver.

Signed-off-by: Joachim Eastwood <manabian@gmail.com>
2012-10-19 13:18:29 -04:00
Joachim Eastwood
a723b98434 net/at91_ether: use macb defs for rx dma buffers
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
2012-10-19 13:18:28 -04:00
Joachim Eastwood
f8bded383e net/at91_ether: use macb access functions
Use macb read/write funtions and remove the old at91_ether ones.

Signed-off-by: Joachim Eastwood <manabian@gmail.com>
2012-10-19 13:18:28 -04:00
Joachim Eastwood
bc3bbef690 net/at91_ether: use macb register definitions
Use register and bits definitions from the macb header. This makes it
possible to have one header file for this hardware.

Process was scripted and the resulting object file has the same checksum.

Signed-off-by: Joachim Eastwood <manabian@gmail.com>
2012-10-19 13:18:28 -04:00
Joachim Eastwood
1fd3ca4e14 net/macb: add AT91RM9200 specific registers and bits to header
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
2012-10-19 13:18:28 -04:00
Pavel Machek
cc0677979e ARM: OMAP2+: Nokia N9/N900/N950 -- mention product names
This adds product names (that most users know) to Kconfig and board
comments.

Signed-off-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-10-19 09:58:29 -07:00
Jonas Bonn
a91a2bb1db openrisc: use generic sys_execve
Signed-off-by: Jonas Bonn <jonas@southpole.se>
2012-10-19 18:33:01 +02:00
Jonas Bonn
cbf23cf1b9 openrisc: use generic kernel_thread/kernel_execve
Signed-off-by: Jonas Bonn <jonas@southpole.se>
2012-10-19 18:32:36 +02:00
Jonas Bonn
287ad220cd openrisc: pass correct arg to schedule_tail
schedule_tail() requires that the 'prev' task be passed as an argument
to it.  This arg is set in _switch, just before 'returning' to one of
the ret_* functions where schedule_tail is invoked.

Signed-off-by: Jonas Bonn <jonas@southpole.se>
2012-10-19 18:32:36 +02:00
Geert Uytterhoeven
8a745ee13f m68k: Wire up kcmp
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Greg Ungerer <gerg@uclinux.org>
2012-10-19 17:49:37 +02:00
Rusty Russell
e2a666d52b kbuild: sign the modules at install time
Linus deleted the old code and put signing on the install command,
I fixed it to extract the keyid and signer-name within sign-file
and cleaned up that script now it always signs in-place.

Some enthusiast should convert sign-key to perl and pull
x509keyid into it.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-19 08:27:43 -07:00
Lars-Peter Clausen
7737fa6d1e iio: Don't compare boolean values to true/false
Fixes the following warnings from coccicheck:
	drivers/iio/inkern.c:81:6-14: WARNING: Comparison to bool
	drivers/iio/dac/ad5686.c:191:5-11: WARNING: Comparison to bool

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-10-19 16:26:24 +01:00
Lars-Peter Clausen
6c724cb0ad staging:iio:lpc32xx_adc: Use resource_size instead of opencoding it
Fixes the following error from coccicheck:
	drivers/staging/iio/adc/lpc32xx_adc.c:153:43-46: ERROR: Missing resource_size with res

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Roland Stigge <stigge@antcom.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-10-19 16:25:31 +01:00
Lars-Peter Clausen
2e132e4692 staging:iio:adis16400: Fixup adis16336 temp channel attributes
The temperature channel has a calibbias attribute which it should not have, but
the offset attribute is missing.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-10-19 16:23:34 +01:00
Lars-Peter Clausen
760ebc0d2a staging:iio:adis16400: Report correct temperature scale and offset
Temperature scale and offset differ between the different devices supported by
this driver. Right now the driver always reports the temperature scale and
offset of the adis16400 regardless of which chip variant is used. This patch
adds two new attributes to the chip_info struct, one for the temperature scale
and one for the temperature offset.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-10-19 16:23:34 +01:00
Lars-Peter Clausen
1cf8c97f94 staging:iio: Fix adis16400 channel offsets and scales
Most of the channel offsets and scales in the adis16400 are incorrect:
    * Voltage scale is off by a factor of 1000
    * Temperature scale is off by a factor of 1000
	* Temperature offset is completely wrong
	* Some of the acceleration scales are either completely wrong or have the
	  wrong unit
	* Some of the angular velocity scale are either completely wrong or have
	  the wrong unit

This patch fixes these issues. For consistency it also converts scales which are
correct to use the IIO_G_TO_M_S_2 and IIO_DEGREE_TO_RAD macro. This makes it
much easier to compare it to the value given in the datasheet.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-10-19 16:23:33 +01:00
Lars-Peter Clausen
7e72a54c08 staging:iio: Fix adis16260 channel offsets and scales
Most of the channel offsets and scales in the adis16260 are incorrect:
	* Temperature scale is off by a factor of 1000
	* Voltage scale is off by a factor of 1000
	* Temperature offset is completely wrong

This patch fixes these issues. Also use the IIO_DEGREE_TO_RAD for the angle
velocity since this makes it much easier to compare it to the value given in the
datasheet.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-10-19 16:23:33 +01:00
Lars-Peter Clausen
acba41f81f staging:iio: Fix adis16240 channel offsets and scales
Most of the channel offsets and scales in the adis16240 are incorrect:
    * Temperature scale is of by a factor of 1000
    * Voltage scale is of by a factor of 1000
    * Temperature offset is completely wrong
	* Peak scale is completely wrong

This patch fixes these issues. Also use the IIO_G_TO_M_S_2 macro for the
acceleration scale since this makes it much easier to compare it to the value
given in the datasheet.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-10-19 16:23:32 +01:00
Lars-Peter Clausen
4524034056 staging:iio: Fix adis16220 channel offsets and scales
Most of the channel offsets and scales in the adis16220 are incorrect:
	* Temperature scale is off by a factor of 1000
	* Voltage scale is off by a factor of 1000
	* Acceleration seems to have a typo "187042" since it should be instead of
	  "1887042"
	* Temperature offset is completely wrong

This patch fixes these issues.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-10-19 16:23:32 +01:00
Lars-Peter Clausen
d5304b7712 staging:iio: Fix adis16209 channel offsets and scales
Most of the channel offsets and scales in the adis16209 are incorrect:
	* Temperature scale is of by a factor of 1000
	* Voltage scale is of by a factor of 1000
	* Temperature offset is completely wrong
	* Rotational position scale is missing

This patch fixes these issues. Also use the IIO_G_TO_M_S_2 macro for the
acceleration scale since this makes it much easier to compare it with the value
given in the datasheet.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-10-19 16:23:31 +01:00
Lars-Peter Clausen
9cc19b81d7 staging:iio: Fix adis16204 channel offsets and scales
Most of the channel offsets and scales in the adis16204 are incorrect:
	* Temperature scale is off by a factor of 1000
	* Voltage scale is off by a factor of 1000
	* Acceleration is scale is in g instead of m/(s**2)
	* Temperature offset is completely wrong

This patch fixes these issues.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-10-19 16:23:17 +01:00
Lars-Peter Clausen
6fae58f392 staging:iio: Don't compare boolean values with true/false
Fixes the following coccicheck warnings:
	drivers/staging/iio/accel/lis3l02dq_ring.c:240:5-10: WARNING: Comparison to bool
	drivers/staging/iio/iio_dummy_evgen.c:111:6-25: WARNING: Comparison to bool

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-10-19 16:19:45 +01:00
Peter Meerwald
cdf71c7f6d staging iio: consistent commas in adis16400 channel spec
probably not the most important patch in the world

Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Cc: manuel.stahl@iis.fraunhofer.de
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-10-19 16:19:07 +01:00
Arnd Bergmann
65cb587d70 staging/iio/lis3l02dq: fix building without irq_to_gpio
The driver has not been building for some time after the
irq_to_gpio function has been removed from the kernel.

The only board in the upstream kernel that provides
this device is the "Stargate 2", which is also maintained
by Jonathan Cameron. Rather than working around the problem
by adding new platform data for this driver, this patch
uses the of_gpio framework to get to the gpio number.

However, the stargate2 code does not (yet) use DT based
probing, so it is still broken, but at least building
allyesconfig works again.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-10-19 16:19:07 +01:00
Lars-Peter Clausen
48edf8eb53 staging:iio: Remove unused DRIVER_NAME defines
Some drivers define a DRIVER_NAME, but never use the define. This patch removes
defines.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-10-19 16:19:06 +01:00
Peter Meerwald
231a7c5f5f staging iio: use iio_trigger_generic_data_rdy_poll() in accel/adis16209,adis16240 driver
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-10-19 16:19:05 +01:00
Peter Meerwald
ace43fcefb iio: fix spelling of Accelerometer in Kconfig
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Acked-by: Srinivas pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-10-19 16:19:02 +01:00
Peter Meerwald
1217c48f51 iio: use iio_push_to_buffer() in at91 driver
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-10-19 16:18:57 +01:00
Peter Meerwald
e1562ef304 iio: remove useless irq_enabled variable in at91
irq_enabled is only set, but never read

Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-10-19 16:18:54 +01:00