The term "HQD" is CP-specific and doesn't
accurately describe the queue resources for other IP blocks like SDMA,
VCN, or VPE. This change:
1. Renames `num_hqds` to `num_slots` in amdgpu_kms.c to better reflect
the generic nature of the resource counting
2. Updates the UAPI struct member from `userq_num_hqds` to `userq_num_slots`
3. Maintains the same functionality while using more appropriate terminology
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This change exposes the number of available user queue instances
for each hardware IP type (GFX, COMPUTE, SDMA) through the
drm_amdgpu_info_hw_ip interface.
Key changes:
1. Added userq_num_instance field to drm_amdgpu_info_hw_ip structure
2. Implemented counting of available HQD slots using:
- mes.gfx_hqd_mask for GFX queues
- mes.compute_hqd_mask for COMPUTE queues
- mes.sdma_hqd_mask for SDMA queues
3. Only counts available instances when user queues are enabled
(!disable_uq)
v2: using the adev->mes.gfx_hqd_mask[]/compute_hqd_mask[]/sdma_hqd_mask[] masks
to determine the number of queue slots available for each engine type (Alex)
v3: rename userq_num_instance to userq_num_hqds (Alex)
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Accessing amdgpu internal data structures "struct amdgpu_device"
and "struct amdgpu_bo" in ISP V4L2 driver to alloc/free GART
buffers is not recommended.
Add new amdgpu_isp helper functions that takes opaque params
from ISP V4L2 driver and calls the amdgpu internal functions
amdgpu_bo_create_isp_user() and amdgpu_bo_create_kernel() to
alloc/free GART buffers.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Pratap Nirujogi <pratap.nirujogi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Pass along the format info from .fb_create() to aliminate the
redundant drm_get_format_info() calls from the afbc code.
Cc: Sandy Huang <hjc@rock-chips.com>
Cc: "Heiko Stübner" <heiko@sntech.de>
Cc: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250701090722.13645-9-ville.syrjala@linux.intel.com
Pass along the format info from .fb_create() to eliminate the
redundant drm_get_format_info() calls from the gem fb code.
v2: Fix kernel docs (Laurent)
Cc: Dave Airlie <airlied@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Sandy Huang <hjc@rock-chips.com>
Cc: "Heiko Stübner" <heiko@sntech.de>
Cc: Andy Yan <andy.yan@rock-chips.com>
Cc: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Cc: virtualization@lists.linux.dev
Cc: spice-devel@lists.freedesktop.org
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250701090722.13645-8-ville.syrjala@linux.intel.com
Decouple .get_format_info() from struct drm_mode_fb_cmd2 and just
pass the pixel format+modifier combo in by hand.
We may want to use .get_format_info() outside of the normal
addfb paths where we won't have a struct drm_mode_fb_cmd2, and
creating a temporary one just for this seems silly.
v2: Fix intel_fb_get_format_info() docs (Laurent)
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Rodrigo Siqueira <siqueira@igalia.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250701090722.13645-2-ville.syrjala@linux.intel.com
When the DRM scheduler times out, it's possible that the GPU isn't hung;
instead, a job just took unusually long (longer than the timeout) but is
still running, and there is, thus, no reason to reset the hardware. This
can occur in two scenarios:
1. The job is taking longer than the timeout, but the driver determined
through a GPU-specific mechanism that the hardware is still making
progress. Hence, the driver would like the scheduler to skip the
timeout and treat the job as still pending from then onward. This
happens in v3d, Etnaviv, and Xe.
2. Timeout has fired before the free-job worker. Consequently, the
scheduler calls `sched->ops->timedout_job()` for a job that isn't
timed out.
These two scenarios are problematic because the job was removed from the
`sched->pending_list` before calling `sched->ops->timedout_job()`, which
means that when the job finishes, it won't be freed by the scheduler
though `sched->ops->free_job()` - leading to a memory leak.
To solve these problems, create a new `drm_gpu_sched_stat`, called
DRM_GPU_SCHED_STAT_NO_HANG, which allows a driver to skip the reset. The
new status will indicate that the job must be reinserted into
`sched->pending_list`, and the hardware / driver will still complete that
job.
Reviewed-by: Philipp Stanner <phasta@kernel.org>
Link: https://lore.kernel.org/r/20250714-sched-skip-reset-v6-2-5c5ba4f55039@igalia.com
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Among the scheduler's statuses, the only one that indicates an error is
DRM_GPU_SCHED_STAT_ENODEV. Any status other than DRM_GPU_SCHED_STAT_ENODEV
signifies that the operation succeeded and the GPU is in a nominal state.
However, to provide more information about the GPU's status, it is needed
to convey more information than just "OK".
Therefore, rename DRM_GPU_SCHED_STAT_NOMINAL to
DRM_GPU_SCHED_STAT_RESET, which better communicates the meaning of this
status. The status DRM_GPU_SCHED_STAT_RESET indicates that the GPU has
hung, but it has been successfully reset and is now in a nominal state
again.
Reviewed-by: Philipp Stanner <phasta@kernel.org>
Link: https://lore.kernel.org/r/20250714-sched-skip-reset-v6-1-5c5ba4f55039@igalia.com
Signed-off-by: Maíra Canal <mcanal@igalia.com>
In some application scenarios, we hope to get the corresponding
connector when the bridge's detect hook is invoked.
In most cases, we can get the connector by drm_atomic_get_connector_for_encoder
if the encoder attached to the bridge is enabled, however there will
still be some scenarios where the detect hook of the bridge is called
but the corresponding encoder has not been enabled yet. For instance,
this occurs when the device is hot plug in for the first time.
Since the call to bridge's detect is initiated by the connector, passing
down the corresponding connector directly will make things simpler.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250703125027.311109-3-andyshrk@163.com
[DB: added the chunk to the cdn-dp driver]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Make the dp/hdmi_audio_* callback maintain the same parameter order as
get_modes and edid_read: first the bridge, then the connector.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250703125027.311109-2-andyshrk@163.com
[DB: added the chunk to the cdn-dp driver]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Randy reports that amdgpu fails to compile with the following error:
ERROR: modpost: "pm_hibernate_is_recovering" [drivers/gpu/drm/amd/amdgpu/amdgpu.ko] undefined!
This happens because pm_hibernate_is_recovering() is only compiled when
CONFIG_PM_SLEEP is set. Add a stub for it so that drivers don't need
to depend upon CONFIG_PM.
Cc: Samuel Zhang <guoqing.zhang@amd.com>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Closes: https://lore.kernel.org/dri-devel/CAJZ5v0h1CX+aTu7dFy6vB-9LM6t5J4rt7Su3qVnq1xx-BFAm=Q@mail.gmail.com/T/#m2b9fe212b35fde11d58fcbc4e0727bc02ebba7b0
Fixes: c2aaddbd2d ("PM: hibernate: add new api pm_hibernate_is_recovering()")
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20250712233715.821424-1-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Fix the following kernel doc warning:
include/drm/drm_device.h:40: warning: Function parameter or struct member 'pid' not described in 'drm_wedge_task_info'
include/drm/drm_device.h:40: warning: Function parameter or struct member 'comm' not described in 'drm_wedge_task_info'
Fixes: 183bccafa1 ("drm: Create a task info option for wedge events")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/lkml/20250618151307.4a1a5e17@canb.auug.org.au/
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20250704190724.1159416-2-andrealmeid@igalia.com
Signed-off-by: André Almeida <andrealmeid@igalia.com>
dev_pm_ops.thaw() is called in following cases:
* normal case: after hibernation image has been created.
* error case 1: creation of a hibernation image has failed.
* error case 2: restoration from a hibernation image has failed.
For normal case, it is called mainly for resume storage devices for
saving the hibernation image. Other devices that are not involved
in the image saving do not need to resume the device. But since there's
no api to know which case thaw() is called, device drivers can't
conditionally resume device in thaw().
The new pm_hibernate_is_recovering() is such a api to query if thaw() is
called in normal case.
Signed-off-by: Samuel Zhang <guoqing.zhang@amd.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://lore.kernel.org/r/20250710062313.3226149-5-guoqing.zhang@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
This new api is used for hibernation to move GTT BOs to shmem after
VRAM eviction. shmem will be flushed to swap disk later to reduce
the system memory usage for hibernation.
Signed-off-by: Samuel Zhang <guoqing.zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250710062313.3226149-2-guoqing.zhang@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Since its inception, the GPU scheduler can leak memory if the driver
calls drm_sched_fini() while there are still jobs in flight.
The simplest way to solve this in a backwards compatible manner is by
adding a new callback, drm_sched_backend_ops.cancel_job(), which
instructs the driver to signal the hardware fence associated with the
job. Afterwards, the scheduler can safely use the established free_job()
callback for freeing the job.
Implement the new backend_ops callback cancel_job().
Suggested-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Link: https://lore.kernel.org/dri-devel/20250418113211.69956-1-tvrtko.ursulin@igalia.com/
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://lore.kernel.org/r/20250710125412.128476-4-phasta@kernel.org
Updates for v6.17
CI:
- uprev mesa and ci-templates
- use shallow clone to speed up build jobs
- remove sdm845/cheza jobs. These runners are no more (RIP
dear chezas)
- fix runner tag for i915 cml runners
- uprev igt to pull in msm test fixes
Core:
- VM_BIND support!
- single source of truth for UBWC configuration. Adds a global soc
driver for UBWC config which is used from display and GPU. (And
later vidc/camera/etc)
- Decouple ties between GPU and KMS, adding a `separate_gpu_kms`
modparam to allow the GPU and KMS to bind to separate DRM devices.
This should better deal with more exotic SoC configurations where
the number of GPUs is different from number of DPUs. The default
behavior is to still come up as a single unified DRM device to
avoid surprising userspace.
DP:
- major rework of the I/O accessors
DPU:
- use version checks instead of feature bits
- SM8750 support
- set min_prefill_lines for SC8180X
DSI:
- SM8750 support
GPU:
- speedbin support for X1-85
- X1-45 support
MDSS:
- SM8750 support
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
From: Robin Clark <robin.clark@oss.qualcomm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CACSVV0217R+kpoWQJeuYGHf6q_4aFyEJuKa=dZZKOnLQzFwppg@mail.gmail.com
drm/i915 feature pull #2 for v6.17:
Features and functionality:
- Add drm_panic support for both i915 and xe drivers (Jocelyn Falempe)
- Add initial flip queue implementation, disabled by default, for LNL and PTL
(Ville)
- Add support for Wildcat Lake (WCL) display, version 30.02 (Matt Roper, Matt
Atwood, Dnyaneshwar)
- Extend drm_panel and follower support to DDI eDP (Arun)
Refactoring and cleanups:
- Make all global state objects opaque (Jani)
- Move display works to display specific unordered workqueue (Luca)
- Add and use struct drm_device based pcode interface (Jani, Lucas)
- Use clamp() instead of max()+min() combo (Ankit)
- Simplify wait for power well disable (Jani)
- Various stylistics cleanups and renames (Jani)
Fixes:
- Deal with loss of pipe DMC state (Ville)
- Fix PTL HDCP2 stream status check (Suraj)
- Add workaround for ADL-P DKL PHY DP and HDMI (Nemesa)
- Fix skl_print_wm_changes() stack usage with KMSAN (Arnd Bergmann)
- Fix PCON capability reads on non-branch devices (Chaitanya)
- Fix which platforms have ultra joiner (Ankit)
DRM core changes:
- Add ttm_bo_kmap_try_from_panic() for xe drm_panic support (Jocelyn Falempe)
- Add private pointer to struct drm_scanout buffer for xe/i915 drm_panic support
(Jocelyn Falempe)
Merges:
- Backmerge drm-next for drm_panel and xe changes (Jani)
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/6d728bf6ef23681b00dfbc7da9aeae41042dee02@intel.com
The vast majority of drivers that use GEM-SHMEM helpers do not use
an s/g table for imported buffers; specifically all drivers that use
DRM_GEM_SHMEM_DRIVER_OPS. Therefore convert the initializer macro
to DRM_GEM_SHMEM_DRIVER_OPS_NO_MAP_SGT and remove the latter. This
helps to avoid swiotbl errors, such as seen with some Aspeed systems
ast 0000:07:00.0: swiotlb buffer is full (sz: 3145728 bytes), total 32768 (slots), used 0 (slots)
The error is caused by the system's limited DMA capabilities and can
happen with any GEM-SHMEM-based driver. It results in a performance
penalty.
In the case of vgem and vkms, the devices do not support DMA at all,
which can result in failure to map the buffer object into the kernel's
address space. [1][2] Avoiding the s/g table fixes this problem.
The other drivers based on GEM-SHMEM, imagination, lima, panfrost,
panthor, v3d and virtio, use the s/g table of imported buffers. Neither
driver uses the default initializer, so they won't be affected by
this change.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reported-by: Zenghui Yu <zenghui.yu@linux.dev>
Closes: https://lore.kernel.org/dri-devel/6d22bce3-4533-4cfa-96ba-64352b715741@linux.dev/ # [1]
Reported-by: José Expósito <jose.exposito89@gmail.com>
Closes: https://lore.kernel.org/dri-devel/20250311172054.2903-1-jose.exposito89@gmail.com/ # [2]
Tested-by: Zenghui Yu <zenghui.yu@linux.dev>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Link: https://lore.kernel.org/r/20250630143537.309052-1-tzimmermann@suse.de
Correct the kernel-doc comment for DRM_BRIDGE_OP_HDMI_CEC_ADAPTER member
of enum drm_bridge_ops. This seems to be just a copy-paste artifact
from DRM_BRIDGE_OP_HDMI_CEC_NOTIFIER above.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250704-drm-bridge-kdoc-fix-v1-1-b08c67212851@collabora.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Make the values a bit more meaningful.
This commit is intentionally cross-subsystem to ease review, as the
patchset is intended to be merged together, with a maintainer
consensus.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/660981/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
This bit is set iff the UBWC version is 1.0. That notably does not
include QCM2290's "no UBWC".
This commit is intentionally cross-subsystem to ease review, as the
patchset is intended to be merged together, with a maintainer
consensus.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/660971/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
As discussed a lot in the past, the UBWC config must be coherent across
a number of IP blocks (currently display and GPU, but it also may/will
concern camera/video as the drivers evolve).
So far, we've been trying to keep the values reasonable in each of the
two drivers separately, but it really make sense to do so centrally,
especially given certain fields (e.g. HBB) may need to be gathered
dynamically.
To reduce room for error, move to fetching the config from a central
source, so that the data programmed into the hardware is consistent
across all multimedia blocks that request it.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/660963/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Add a file that will serve as a single source of truth for UBWC
configuration data for various multimedia blocks.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/660959/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Add a VM_BIND ioctl for binding/unbinding buffers into a VM. This is
only supported if userspace has opted in to MSM_PARAM_EN_VM_BIND.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Tested-by: Antonino Maniscalco <antomani103@gmail.com>
Reviewed-by: Antonino Maniscalco <antomani103@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/661524/
This submitqueue type isn't tied to a hw ringbuffer, but instead
executes on the CPU for performing async VM_BIND ops.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Tested-by: Antonino Maniscalco <antomani103@gmail.com>
Reviewed-by: Antonino Maniscalco <antomani103@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/661517/
We'll be re-using these for the VM_BIND ioctl.
Also, rename a few things in the uapi header to reflect that syncobj use
is not specific to the submit ioctl.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Tested-by: Antonino Maniscalco <antomani103@gmail.com>
Reviewed-by: Antonino Maniscalco <antomani103@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/661512/
Buffers that are not shared between contexts can share a single resv
object. This way drm_gpuvm will not track them as external objects, and
submit-time validating overhead will be O(1) for all N non-shared BOs,
instead of O(n).
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Tested-by: Antonino Maniscalco <antomani103@gmail.com>
Reviewed-by: Antonino Maniscalco <antomani103@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/661497/
Add a SET_PARAM for userspace to request to manage to the VM itself,
instead of getting a kernel managed VM.
In order to transition to a userspace managed VM, this param must be set
before any mappings are created.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Tested-by: Antonino Maniscalco <antomani103@gmail.com>
Reviewed-by: Antonino Maniscalco <antomani103@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/661494/
Add PRR (Partial Resident Region) is a bypass address which make GPU
writes go to /dev/null and reads return zero. This is used to implement
vulkan sparse residency.
To support PRR/NULL mappings, we allocate a page to reserve a physical
address which we know will not be used as part of a GEM object, and
configure the SMMU to use this address for PRR/NULL mappings.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Tested-by: Antonino Maniscalco <antomani103@gmail.com>
Reviewed-by: Antonino Maniscalco <antomani103@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/661486/
If the callback is going to have to attempt to grab more locks, it is
useful to have an ww_acquire_ctx to avoid locking order problems.
Why not use the drm_exec helper instead? Mainly because (a) where
ww_acquire_init() is called is awkward, and (b) we don't really
need to retry after backoff, we can just move on to the next object.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Tested-by: Antonino Maniscalco <antomani103@gmail.com>
Reviewed-by: Antonino Maniscalco <antomani103@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/661463/
For UNMAP/REMAP steps we could be needing to lock objects that are not
explicitly listed in the VM_BIND ioctl in order to tear-down unmapped
VAs. These helpers handle locking/preparing the needed objects.
Note that these functions do not strictly require the VM changes to be
applied before the next drm_gpuvm_sm_map_lock()/_unmap_lock() call. In
the case that VM changes from an earlier drm_gpuvm_sm_map()/_unmap()
call result in a differing sequence of steps when the VM changes are
actually applied, it will be the same set of GEM objects involved, so
the locking is still correct.
v2: Rename to drm_gpuvm_sm_*_exec_locked() [Danilo]
v3: Expand comments to show expected usage, and explain how the usage
is safe in the case of overlapping driver VM_BIND ops.
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Tested-by: Antonino Maniscalco <antomani103@gmail.com>
Reviewed-by: Antonino Maniscalco <antomani103@gmail.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/661458/
Update the RPMH level definitions to include TURBO_L5 corner.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/661840/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
add support to add a directory for each client-id
with root at the dri level. Since the clients are
unique and not just related to one single drm device,
so it makes more sense to add all the client based
nodes with root as dri.
Also create a debugfs file which show the process
information for the client and create a symlink back
to the parent drm device from each client.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250704075548.1549849-3-sunil.khatri@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
Requirement is to create per client-id based directories to
hold key debugging information and for that access to
root debugfs dentry is need which is not in one place
and that information cannot be stored in drm_device.
Move the debugfs functionality from drm_drv.c and drm_accel.c
to drm_debugfs.c This enables debugfs root node reference
directly drm_debugfs.c and hence enable to create per client-id
directory.
v8: Create drm_accel dentry only if it's config is enabled (Jeff, Hugo)
v8: Merge drm_drv and drm_accel debugfs patches (Koenig, Christian)
v10: Since we moved drm_debugfs_root, hence to handle drm bridge
debugfs add a new function which call drm_bridge_debugfs_params where
drm_debugfs_root is accessible.
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Link: https://lore.kernel.org/r/20250704075548.1549849-2-sunil.khatri@amd.com
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
One additional PCI ID is added in Bspec for BMG, Add it so that
driver recognizes this device with this new ID.
Bspec: 68090
Cc: stable@vger.kernel.org # v6.12+
Signed-off-by: Vodapalli, Ravi Kumar <ravi.kumar.vodapalli@intel.com>
Reviewed-by: Shekhar Chauhan <shekhar.chauhan@intel.com>
Acked-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://lore.kernel.org/r/20250704103527.100178-1-ravi.kumar.vodapalli@intel.com
Rather than returning ERR_PTR or NULL on failure, replace the NULL
return with ERR_PTR(-ENOMEM). This simplifies error handling at the
caller. While here, add kernel documentation for
drmm_alloc_ordered_workqueue.
Cc: Louis Chauvet <louis.chauvet@bootlin.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Link: https://lore.kernel.org/r/20250702232831.3271328-2-matthew.brost@intel.com
Documentation for luminance_set for struct drm_edp_backlight_info
was missed which causes warnings.
Fixes: 2af612ad42 ("drm/dp: Introduce new member in drm_backlight_info")
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@gmail.com>
Link: https://lore.kernel.org/r/20250701085054.746408-1-suraj.kandpal@intel.com
Drop the unused MIPI_DSI_MODE_VSYNC_FLUSH flag. Whether or not a display
FIFO flush on vsync is required to avoid sending garbage to the panel is
not a property of the DSI link, but of the integration between display
controller and DSI host bridge.
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250627-dsi-vsync-flush-v2-4-4066899a5608@pengutronix.de
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Change the argument type to u32 for the default level being sent
since it has to now account for luminance value which has to be
set for DP_EDP_PANEL_LUMINANCE_TARGET_VALUE.
--v2
-No need to typecast [Jani]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://lore.kernel.org/r/20250620063445.3603086-10-suraj.kandpal@intel.com
Use u32 for level variable as one may need to pass value for
DP_EDP_PANEL_TARGET_LUMINANCE_VALUE.
--v2
-Typecase is not needed [Jani]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://lore.kernel.org/r/20250620063445.3603086-8-suraj.kandpal@intel.com
Change the current_level argument type to u32 from u16
since it can now carry the value which it gets from
DP_EDP_PANEL_TARGET_LUMINANCE_VALUE.
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://lore.kernel.org/r/20250620063445.3603086-6-suraj.kandpal@intel.com
Use u32 instead of u16 for max variable in drm_edp_backlight_info
since it can now hold max luminance range value which is u32.
We will set this max with max_luminance value when luminance_set is
true.
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://lore.kernel.org/r/20250620063445.3603086-5-suraj.kandpal@intel.com
