Clock framework for SPEAr is based upon clkdev framework for ARM
Reviewed-by: Linus Walleij <linux.walleij@stericsson.com>
Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
No need to seek on this file, so prevent it outright so we can
avoid using default_llseek - removes one more BKL usage.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[drop useless llseek = no_llseek and smp_lock.h inclusion]
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnd Bergmann <arnd@relay.de.ibm.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Dmitry Adamushko <dmitry.adamushko@gmail.com>
LKML-Reference: <1270910781-8786-1-git-send-regression-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Support for both boards can easily be built into one kernel image, so
there is no need to add one defconfig for each of them.
Signed-off-by: Christian Glindkamp <christian.glindkamp@taskit.de>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Both boards share the same board file, as the PortuxG20 is basically an
SBC based on the Stamp9G20.
Signed-off-by: Christian Glindkamp <christian.glindkamp@taskit.de>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Cosmetic change to mach-at91 Makefile: remove two blanks introduced
by earlier patches.
Signed-off-by: Ernst Schwab <eschwab@online.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This patch adds variants of rcu_dereference() that handle
situations where the RCU-protected data structure cannot change,
perhaps due to our holding the update-side lock, or where the
RCU-protected pointer is only to be fetched, not dereferenced.
These are needed due to some performance concerns with using
rcu_dereference() where it is not required, aside from the need
for lockdep/sparse checking.
The new rcu_access_pointer() primitive is for the case where the
pointer is be fetch and not dereferenced. This primitive may be
used without protection, RCU or otherwise, due to the fact that
it uses ACCESS_ONCE().
The new rcu_dereference_protected() primitive is for the case
where updates are prevented, for example, due to holding the
update-side lock. This primitive does neither ACCESS_ONCE() nor
smp_read_barrier_depends(), so can only be used when updates are
somehow prevented.
Suggested-by: David Howells <dhowells@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: laijs@cn.fujitsu.com
Cc: dipankar@in.ibm.com
Cc: mathieu.desnoyers@polymtl.ca
Cc: josh@joshtriplett.org
Cc: dvhltc@us.ibm.com
Cc: niv@us.ibm.com
Cc: peterz@infradead.org
Cc: rostedt@goodmis.org
Cc: Valdis.Kletnieks@vt.edu
Cc: dhowells@redhat.com
Cc: eric.dumazet@gmail.com
LKML-Reference: <1270852752-25278-1-git-send-email-paulmck@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Added a new function: ep93xx_chip_revision() which reads chip revision
from the sysconfig register.
Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
A number of the peripherals for the ep93xx are registered at
startup using platform_data that is passed from the board init
code to the core code. This data is then copied to a local
static variable in the core code. Since the data is copied,
the original data can be marked as __initdata and discarded
after startup is complete.
This adds the __initdata tag to all the appropriate data in
the various ep93xx board init's. Specifically, all the
struct ep93xx_eth_data, struct ep93xxfb_mach_info, and
struct i2c_gpio_platform_data.
Also, document the various registration functions and note
what data should be marked as __initdata.
While here, also cleanup a couple over zealous whitespace tabs.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Ryan Mallon <ryan@bluewatersys.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This factors out the common initialization code for the two vic
vendors into easier maintainable functions.
Tested-by: Linus Walleij <linus.walleij@stericsson.com>
Tested-by: Alessandro Rubini <rubini@unipv.it>
Cc: Andrea Gallo <andrea.gallo@stericsson.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
When crash happens in interrupt context there is no userspace context.
We always use current->active_mm in those cases.
Signed-off-by: Mika Westerberg <ext-mika.1.westerberg@nokia.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
From: Imre Deak <imre.deak@nokia.com>
Signal handlers can use floating point, so prevent them to corrupt
the main thread's VFP context. So far there were two signal stack
frame formats defined based on the VFP implementation, but the user
struct used for ptrace covers all posibilities, so use it for the
signal stack too.
Introduce also a new user struct for VFP exception registers. In
this too fields not relevant to the current VFP architecture are
ignored.
Support to save / restore the exception registers was added by
Will Deacon.
Signed-off-by: Imre Deak <imre.deak@nokia.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
From: Imre Deak <imre.deak@nokia.com>
Recently the UP versions of these functions were refactored and as
a side effect it became possible to call them for the current thread.
This isn't true for the SMP versions however, so fix this up.
Signed-off-by: Imre Deak <imre.deak@nokia.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
The VIVT cache of a highmem page is always flushed before the page
is unmapped. This cache flush is explicit through flush_cache_kmaps()
in flush_all_zero_pkmaps(), or through __cpuc_flush_dcache_area() in
kunmap_atomic(). There is also an implicit flush of those highmem pages
that were part of a process that just terminated making those pages free
as the whole VIVT cache has to be flushed on every task switch. Hence
unmapped highmem pages need no cache maintenance in that case.
However unmapped pages may still be cached with a VIPT cache because the
cache is tagged with physical addresses. There is no need for a whole
cache flush during task switching for that reason, and despite the
explicit cache flushes in flush_all_zero_pkmaps() and kunmap_atomic(),
some highmem pages that were mapped in user space end up still cached
even when they become unmapped.
So, we do have to perform cache maintenance on those unmapped highmem
pages in the context of DMA when using a VIPT cache. Unfortunately,
it is not possible to perform that cache maintenance using physical
addresses as all the L1 cache maintenance coprocessor functions accept
virtual addresses only. Therefore we have no choice but to set up a
temporary virtual mapping for that purpose.
And of course the explicit cache flushing when unmapping a highmem page
on a system with a VIPT cache now can go, which should increase
performance.
While at it, because the code in __flush_dcache_page() has to be modified
anyway, let's also make sure the mapped highmem pages are pinned with
kmap_high_get() for the duration of the cache maintenance operation.
Because kunmap() does unmap highmem pages lazily, it was reported by
Gary King <GKing@nvidia.com> that those pages ended up being unmapped
during cache maintenance on SMP causing segmentation faults.
Signed-off-by: Nicolas Pitre <nico@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
From: Julien Langer <julien.langer@gmail.com>
AT91: when turning off the PLLs during suspend, don't wait for the lock
flag to be set. Previously the code would always run into the loop
limitation of 1000 iterations because the flag is never set when turning
the PLLs off.
Comments from Anders Larsen:
(in http://marc.info/?l=linux-kernel&m=127058929724193&w=2)
Signed-off-by: Julien Langer <julien.langer@gmail.com>
Signed-off-by: Anders Larsen <al@alarsen.net>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Currently, live mode is invoked by explicitly invoking the
record and report sides and connecting them with a pipe e.g.
$ perf trace record rwtop -o - | perf trace report rwtop 5 -i -
In terms of usability, it's not that bad, but it does require
the user to type and remember more than necessary.
This patch allows the user to accomplish the same thing without
specifying the separate record/report steps or the pipe. So the
same command as above can be accomplished more simply as:
$ perf trace rwtop 5
Notice that the '-i -' and '-o -' aren't required in this case -
they're added internally, and that any extra arguments are
passed along to the report script (but not to the record
script).
The overall effect is that any of the scripts listed in 'perf
trace -l' can now be used directly in live mode, with the
expected arguments, by simply specifying the script and args to
'perf trace'.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: k-keiichi@bx.jp.nec.com
Cc: acme@ghostprotocols.net
LKML-Reference: <1270184365-8281-12-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
It should be possible to run any perf trace script in 'live
mode'. This requires being able to pass in e.g. '-i -' or other
args, which the current shell scripts aren't equipped to handle.
In a few cases, there are required or optional args that also
need special handling. This patch makes changes the current set
of shell scripts as necessary.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: k-keiichi@bx.jp.nec.com
Cc: acme@ghostprotocols.net
LKML-Reference: <1270184365-8281-11-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
A couple of scripts, one in Python and the other in Perl, that
demonstrate 'live mode' tracing. For each, the output of the
perf event stream is fed continuously to the script, which
continuously aggregates the data and reports the current results
every 3 seconds, or at the optionally specified interval. After
the current results are displayed, the aggregations are cleared
and the cycle begins anew.
To run the scripts, simply pipe the output of the 'perf trace
record' step as input to the corresponding 'perf trace report'
step, using '-' as the filename to -o and -i:
$ perf trace record sctop -o - | perf trace report sctop -i -
Also adds clear_term() utility functions to the Util.pm and
Util.py utility modules, for use by any script to clear the
screen.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: k-keiichi@bx.jp.nec.com
Cc: acme@ghostprotocols.net
LKML-Reference: <1270184365-8281-10-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Bypasses the build_id perf header code and replaces it with a
synthesized event and processing function that accomplishes the
same thing, used when reading/writing perf data to/from a pipe.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: k-keiichi@bx.jp.nec.com
Cc: acme@ghostprotocols.net
LKML-Reference: <1270184365-8281-9-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Bypasses the tracing_data perf header code and replaces it with
a synthesized event and processing function that accomplishes
the same thing, used when reading/writing perf data to/from a
pipe.
The tracing data is pretty large, and this patch doesn't attempt
to break it down into component events. The tracing_data event
itself doesn't actually contain the tracing data, rather it
arranges for the event processing code to skip over it after
it's read, using the skip return value added to the event
processing loop in a previous patch.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: k-keiichi@bx.jp.nec.com
Cc: acme@ghostprotocols.net
LKML-Reference: <1270184365-8281-8-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Bypasses the event type perf header code and replaces it with a
synthesized event and processing function that accomplishes the
same thing, used when reading/writing perf data to/from a pipe.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: k-keiichi@bx.jp.nec.com
Cc: acme@ghostprotocols.net
LKML-Reference: <1270184365-8281-7-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Bypasses the attr perf header code and replaces it with a
synthesized event and processing function that accomplishes the
same thing, used when reading/writing perf data to/from a pipe.
Making the attrs into events allows them to be streamed over a
pipe along with the rest of the header data (in later patches).
It also paves the way to allowing events to be added and removed
from perf sessions dynamically.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: k-keiichi@bx.jp.nec.com
Cc: acme@ghostprotocols.net
LKML-Reference: <1270184365-8281-6-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Adds special treatment for stdin - if the user specifies '-i -'
to perf trace, the intent is that the event stream be read from
stdin rather than from a disk file.
The actual handling of the '-' filename is done by the session;
this just adds a signal handler to stop reporting, and turns off
interference by the pager.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: k-keiichi@bx.jp.nec.com
Cc: acme@ghostprotocols.net
LKML-Reference: <1270184365-8281-5-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Adds special treatment for stdin - if the user specifies '-i -'
to perf report, the intent is that the event stream be written
to stdin rather than from a disk file.
The actual handling of the '-' filename is done by the session;
this just adds a signal handler to stop reporting, and turns off
interference by the pager.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: k-keiichi@bx.jp.nec.com
Cc: acme@ghostprotocols.net
LKML-Reference: <1270184365-8281-4-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Adds special treatment for stdout - if the user specifies '-o -'
to perf record, the intent is that the event stream be written
to stdout rather than to a disk file.
Also, redirect stdout of forked child to stderr - in pipe mode,
stdout of the forked child interferes with the stdout perf
stream, so redirect it to stderr where it can still be seen but
won't be mixed in with the perf output.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: k-keiichi@bx.jp.nec.com
Cc: acme@ghostprotocols.net
LKML-Reference: <1270184365-8281-3-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch makes several changes to allow the perf event stream
to be sent and received over a pipe:
- adds pipe-specific versions of the header read/write code
- adds pipe-specific version of the event processing code
- adds a range of event types to be used for header or other
pseudo events, above the range used by the kernel
- checks the return value of event handlers, which they can use
to skip over large events during event processing rather than actually
reading them into event objects.
- unifies the multiple do_read() functions and updates its
users.
Note that none of these changes affect the existing perf data
file format or processing - this code only comes into play if
perf output is sent to stdout (or is read from stdin).
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: k-keiichi@bx.jp.nec.com
Cc: acme@ghostprotocols.net
LKML-Reference: <1270184365-8281-2-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch corrects author and copyright notices following the split-up of
the GE Fanuc joint venture.
Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Parsing an option from the command line with OPT_BOOLEAN on a
bool data type would not work on a big-endian machine due to the
manner in which the boolean was being cast into an int and
incremented. For example, running 'perf probe --list' on a
PowerPC machine would fail to properly set the list_events bool
and would therefore print out the usage information and
terminate.
This patch makes OPT_BOOLEAN work as expected with a bool
datatype. For cases where the original OPT_BOOLEAN was
intentionally being used to increment an int each time it was
passed in on the command line, this patch introduces OPT_INCR
with the old behaviour of OPT_BOOLEAN (the verbose variable is
currently the only such example of this).
I have reviewed every use of OPT_BOOLEAN to verify that a true
C99 bool was passed. Where integers were used, I verified that
they were only being used for boolean logic and changed them to
bools to ensure that they would not be mistakenly used as ints.
The major exception was the verbose variable which now uses
OPT_INCR instead of OPT_BOOLEAN.
Signed-off-by: Ian Munsie <imunsie@au.ibm.com>
Acked-by: David S. Miller <davem@davemloft.net>
Cc: <stable@kernel.org> # NOTE: wont apply to .3[34].x cleanly, please backport
Cc: Git development list <git@vger.kernel.org>
Cc: Ian Munsie <imunsie@au1.ibm.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Eric B Munson <ebmunson@us.ibm.com>
Cc: Valdis.Kletnieks@vt.edu
Cc: WANG Cong <amwang@redhat.com>
Cc: Thiago Farina <tfransosi@gmail.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Cc: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Anton Blanchard <anton@samba.org>
Cc: John Kacur <jkacur@redhat.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1271147857-11604-1-git-send-email-imunsie@au.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Fixes compile errors in blk-cgroup code for empty_time stat and a merge fix in
CFQ. The first error was when CONFIG_DEBUG_CFQ_IOSCHED is not set.
Signed-off-by: Divyesh Shah <dpshah@google.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
MX3 SoCs have a silicon bug which corrupts CRC calculation of
multi-block transfers when connected SDIO peripheral doesn't drive the
BUSY line as required by the specs.
One way to prevent this is to only allow 1-bit transfers.
Another way is playing tricks with the DMA engine, but this isn't
mainline yet. So for now, we live with the performance drawback of 1-bit
transfers until a nicer solution is found.
This patch introduces a new host controller callback 'init_card' which
is for now only called from mmc_sdio_init_card().
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Volker Ernst <volker.ernst@txtr.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Michał Mirosław <mirqus@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Be more verbose on error messages and add one debug message.
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Volker Ernst <volker.ernst@txtr.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Michał Mirosław <mirqus@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Need to include <asm/div64.h> for do_div calls.
Signed-off-by: Dinh Nguyen <Dinh.Nguyen@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
On i.MX21 SoCs, if the NFC_CONFIG1:NFC_INT_MASK bit is set,
NFC_CONFIG2:NFC_INT always reads out zero, even if an
operation is completed. This patch uses enable_irq and
disable_irq_nosync instead of NFC_CONFIG1:NFC_INT_MASK to
mask NFC interrupts. This allows NFC_CONFIG2:NFC_INT to also
be used to detect operation completion on i.MX21.
The i.MX21 NFC does not signal reset completion using
NFC_CONFIG1:NFC_INT_MASK, so instead reset completion is
tested by checking if NFC_CONFIG2 becomes 0.
Signed-off-by: Ivo Clarysse <ivo.clarysse@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch allows the mxc_nand driver to reset the NAND
flash controller. NFC registers are (re-)set after
completion of the reset, as a reset will have reverted
the NFC registers to their default values.
Signed-off-by: Ivo Clarysse <ivo.clarysse@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds support for SoC build-in RTC device on litekit board.
Signed-off-by: Vladimir Zapolskiy <vzapolskiy@gmail.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>