Commit graph

199,777 commits

Author SHA1 Message Date
Amit Kumar Salecha
0bc92b5b49 qlcnic: fix fw load from file
Rarely: Fw file size can be unaligned to 8.

Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-03 14:19:12 -07:00
Ben Hutchings
33cd9dfa3a sparc64: Fix array size reported by vmemmap_populate()
vmemmap_populate() attempts to report the used index and total size of
vmemmap_table, but it wrongly shifts the total size so that it is
always shown as 0.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-03 13:58:45 -07:00
Curt Wohlgemuth
8b472d739b ext4: Fix possible lost inode write in no journal mode
In the no-journal case, ext4_write_inode() will fetch the bh and call
sync_dirty_buffer() on it.  However, if the bh has already been
written and the bh reclaimed for some other purpose, AND if the inode
is the only one in the inode table block in use, then
ext4_get_inode_loc() will not read the inode table block from disk,
but as an optimization, fill the block with zero's assuming that its
caller will copy in the on-disk version of the inode.  This is not
done by ext4_write_inode(), so the contents of the inode can simply
get lost.  The fix is to use __ext4_get_inode_loc() with in_mem set to
0, instead of ext4_get_inode_loc().  Long term the API needs to be
fixed so it's obvious why latter is not safe.

Addresses-Google-Bug: #2526446

Signed-off-by: Curt Wohlgemuth <curtw@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-04-03 16:45:06 -04:00
Suresh Jayaraman
6513a81e93 cifs: Fix a kernel BUG with remote OS/2 server (try #3)
While chasing a bug report involving a OS/2 server, I noticed the server sets
pSMBr->CountHigh to a incorrect value even in case of normal writes. This
results in 'nbytes' being computed wrongly and triggers a kernel BUG at
mm/filemap.c.

void iov_iter_advance(struct iov_iter *i, size_t bytes)
{
        BUG_ON(i->count < bytes);    <--- BUG here

Why the server is setting 'CountHigh' is not clear but only does so after
writing 64k bytes. Though this looks like the server bug, the client side
crash may not be acceptable.

The workaround is to mask off high 16 bits if the number of bytes written as
returned by the server is greater than the bytes requested by the client as
suggested by Jeff Layton.

CC: Stable <stable@kernel.org>
Reviewed-by: Jeff Layton <jlayton@samba.org>
Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-04-03 17:24:20 +00:00
Steve French
a24e2d7d8f [CIFS] initialize nbytes at the beginning of CIFSSMBWrite()
By doing this we always overwrite nbytes value that is being passed on to
CIFSSMBWrite() and need not rely on the callers to initialize. CIFSSMBWrite2 is
doing this already.

CC: Stable <stable@kernel.org>
Reviewed-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Reviewed-by: Jeff Layton <jlayton@samba.org>
Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-04-03 17:20:21 +00:00
Ingo Molnar
22a4e4c435 Merge branch 'perf/urgent' into perf/core
Conflicts:
	tools/perf/Makefile

Merge reason: resolve the conflict.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-04-03 18:17:55 +02:00
Ingo Molnar
70a7c1271e Merge branch 'perf' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux-2.6 into perf/core 2010-04-03 18:16:42 +02:00
Arnaldo Carvalho de Melo
533c46c31c perf newt: Pass the input_name to perf_session__browse_hists
So that it can use it in the 'perf annotate' command line, otherwise
it'll use the default and not the specified -i filename passed to 'perf
report'.

Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-04-03 11:54:35 -03:00
Arnaldo Carvalho de Melo
e65713ea1e perf newt: Move the hist browser population bits to separare function
Next patches will use that when applying filtes to then repopulate the
browser with the narrowed vision.

Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-04-03 11:25:56 -03:00
Arnaldo Carvalho de Melo
fb6b893180 perf newt: Remove useless column width calculation
Not used in the TUI interface.

Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-04-03 11:04:55 -03:00
Luis Correia
f18d4463d0 rt2x00: remove MCU requests for SoC platforms
The ralink SoC platforms do not have an MCU.

Signed-off-by: Luis Correia <luis.f.correia@gmail.com>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
2010-04-03 16:04:11 +02:00
Anton Blanchard
4af8b35db6 perf symbols: Fill in pgoff in mmap synthesized events
When we synthesize mmap events we need to fill in the pgoff field.

I wasn't able to test this completely since I couldn't find an
executable region with a non 0 offset. We will see it when we start
doing data profiling.

Signed-off-by: Anton Blanchard <anton@samba.org>
Cc: David Miller <davem@davemloft.net>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <20100403115331.GK5594@kryten>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-04-03 10:20:31 -03:00
Arnaldo Carvalho de Melo
e206d556c5 perf tools: Move the prototypes in util/string.h to util.h
So that we avoid conflict with libc's string.h header.

Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Suggested-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-04-03 10:19:26 -03:00
Frederic Weisbecker
6e03bb5ad3 perf: Always build the powerpc perf_arch_fetch_caller_regs version
Now that software events use perf_arch_fetch_caller_regs() too, we
need the powerpc version to be always built.

Fixes the following build error:

	(.text+0x3210): undefined reference to `perf_arch_fetch_caller_regs'
	(.text+0x3324): undefined reference to `perf_arch_fetch_caller_regs'
	(.text+0x33bc): undefined reference to `perf_arch_fetch_caller_regs'
	(.text+0x33ec): undefined reference to `perf_arch_fetch_caller_regs'
	(.text+0xd4a0): undefined reference to `perf_arch_fetch_caller_regs'
	arch/powerpc/kernel/built-in.o:(.text+0xd528): more undefined references to `perf_arch_fetch_caller_regs' follow
	make[1]: *** [.tmp_vmlinux1] Error 1
	make: *** [sub-make] Error 2

Reported-by: Michael Ellerman <michael@ellerman.id.au>
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
2010-04-03 12:42:00 +02:00
Frederic Weisbecker
26d80aa782 perf: Always build the stub perf_arch_fetch_caller_regs version
Now that software events use perf_arch_fetch_caller_regs() too, we
need the stub version to be always built in for archs that don't
implement it.

Fixes the following build error in PARISC:

	kernel/built-in.o: In function `perf_event_task_sched_out':
	(.text.perf_event_task_sched_out+0x54): undefined reference to `perf_arch_fetch_caller_regs'

Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
2010-04-03 12:22:05 +02:00
Stefan Bader
9875557ee8 drm/i915: Add no_lvds entry for the Clientron U800
BugLink: http://bugs.launchpad.net/ubuntu/bugs/544671

This system claims to have a LVDS but has not.

Signed-off-by: Stephane Graber <stgraber@ubuntu.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
CC: stable@kernel.org
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-04-02 18:46:45 -10:00
Linus Torvalds
5e11611a5d Merge master.kernel.org:/home/rmk/linux-2.6-arm
* master.kernel.org:/home/rmk/linux-2.6-arm:
  ARM: 5965/1: Fix soft lockup in at91 udc driver
  ARM: 6006/1: ARM: Use the correct NOP size in memmove for Thumb-2 kernel builds
  ARM: 6005/1: arm: kprobes: fix register corruption with jprobes
  ARM: 6003/1: removing compilation warning from pl061.h
  ARM: 6001/1: removing compilation warning comming from clkdev.h
  ARM: 6000/1: removing compilation warning comming from <asm/irq.h>
  ARM: 5999/1: Including device.h and resource.h header files in linux/amba/bus.h
  ARM: 5997/1: ARM: Correct the VFPv3 detection
  ARM: 5996/1: ARM: Change the mandatory barriers implementation (4/4)
  ARM: 5995/1: ARM: Add L2x0 outer_sync() support (3/4)
  ARM: 5994/1: ARM: Add outer_cache_fns.sync function pointer (2/4)
  ARM: 5993/1: ARM: Move the outer_cache definitions into a separate file (1/4)
2010-04-02 19:50:11 -07:00
Linus Torvalds
d4509e5a6e Merge branch 'merge' of git://git.secretlab.ca/git/linux-2.6
* 'merge' of git://git.secretlab.ca/git/linux-2.6:
  powerpc/5200: in lpbfifo, flag DMA irqs as enabled after requesting them
  powerpc/fsl: add device tree binding for QE firmware
  of/flattree: Fix unhandled OF_DT_NOP tag when unflattening the device tree
2010-04-02 19:49:50 -07:00
Linus Torvalds
0afa80ab6f Merge branch 'reiserfs/kill-bkl' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing
* 'reiserfs/kill-bkl' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing:
  reiserfs: Fix locking BUG during mount failure
2010-04-02 19:48:54 -07:00
Clemens Ladisch
5193d7a7f5 PCI quirk: RS780/RS880: disable MSI behind the PCI bridge
The missing initialization of the nb_cntl.strap_msi_enable does not
seem to be the only problem that prevents MSI, so that quirk is not
sufficient to enable MSI on all machines.  To be safe, disable MSI
unconditionally for the internal graphics and HDMI audio on these
chipsets.

[rjw: Added the PCI_VENDOR_ID_AI quirk.]

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-04-02 19:47:05 -07:00
Linus Torvalds
5e123e5d9b Merge branch 'kgdb-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb
* 'kgdb-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb:
  kgdb: Turn off tracing while in the debugger
  kgdb: use atomic_inc and atomic_dec instead of atomic_set
  kgdb: eliminate kgdb_wait(), all cpus enter the same way
  kgdbts,sh: Add in breakpoint pc offset for superh
  kgdb: have ebin2mem call probe_kernel_write once
2010-04-02 19:45:05 -07:00
Linus Torvalds
24b99d1576 Merge branch 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6
* 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6:
  Freezer: Fix buggy resume test for tasks frozen with cgroup freezer
  Freezer: Only show the state of tasks refusing to freeze
2010-04-02 19:44:42 -07:00
Oleg Nesterov
6da8d866d0 tty: release_one_tty() forgets to put pids
release_one_tty(tty) can be called when tty still has a reference
to pgrp/session. In this case we leak the pid.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reported-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-and-tested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-04-02 19:44:09 -07:00
Alan Stern
3d61510f4e HID: usbhid: enable remote wakeup for keyboards
This patch (as1365) enables remote wakeup by default for USB keyboard
devices.  Keyboards in general are supposed to be wakeup devices, but
the correct place to enable it depends on the device's bus; no single
approach will work for all keyboard devices.  In particular, this
covers only USB keyboards (and then only those supporting the boot
protocol).

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-04-03 01:36:03 +02:00
Sage Weil
0e0d5e0c4b ceph: fix ack counter reset on connection reset
If in_seq_acked isn't reset along with in_seq, we don't ack received
messages until we reach the old count, consuming gobs memory on the other
end of the connection and introducing a large delay when those messages
are eventually deleted.

Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-02 16:07:19 -07:00
David Woodhouse
4e4f10f649 phylib: Add module table to all existing phy drivers
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-02 14:30:40 -07:00
David Woodhouse
8626d3b432 phylib: Support phy module autoloading
We don't use the normal hotplug mechanism because it doesn't work. It will
load the module some time after the device appears, but that's not good
enough for us -- we need the driver loaded _immediately_ because otherwise
the NIC driver may just abort and then the phy 'device' goes away.

[bwh: s/phy/mdio/ in module alias, kerneldoc for struct mdio_device_id]

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Acked-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-02 14:30:39 -07:00
J. Bruce Fields
9045b4b9f7 nfsd4: remove probe task's reference on client
Any null probe rpc will be synchronously destroyed by the
rpc_shutdown_client() in expire_client(), so the rpc task cannot outlast
the nfs4 client.  Therefore there's no need for that task to hold a
reference on the client.

Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2010-04-02 17:04:32 -04:00
J. Bruce Fields
3df796dbe9 nfsd4: remove dprintk
I haven't found this useful.

Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2010-04-02 17:04:31 -04:00
Borislav Petkov
b0f86f5a16 perf, probe-finder: Build fix on Debian
Building chokes with:

 In file included from /usr/include/gelf.h:53,
                 from /usr/include/elfutils/libdw.h:53,
                 from util/probe-finder.h:61,
                 from util/probe-finder.c:39:
 /usr/include/libelf.h:98: error: expected specifier-qualifier-list before 'off64_t'
 [...]

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Acked-by: Masami Hiramatsu <mhiramat@redhat.com>
LKML-Reference: <20100329164755.GA16034@aftab>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-04-02 22:46:26 +02:00
J. Bruce Fields
147efd0dd7 nfsd4: shutdown callbacks on expiry
Once we've expired the client, there's no further purpose to the
callbacks; go ahead and shut down the callback client rather than
waiting for the last reference to go.

Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2010-04-02 16:36:30 -04:00
Eric Dumazet
9092c658ba net: illegal_highdma() fix
Followup to commit 5acbbd428d
(net: change illegal_highdma to use dma_mask)

If dev->dev.parent is NULL, we should not try to dereference it.

Dont force inline illegal_highdma() as its pretty big now.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-02 13:34:49 -07:00
J. Bruce Fields
227f98d98d nfsd4: preallocate nfs4_rpc_args
Instead of allocating this small structure, just include it in the
delegation.

The nfsd4_callback structure isn't really necessary yet, but we plan to
add to it all the information necessary to perform a callback.

Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2010-04-02 16:28:11 -04:00
Jason Wessel
4da75b9cea kgdb: Turn off tracing while in the debugger
The kernel debugger should turn off kernel tracing any time the
debugger is active and restore it on resume.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
2010-04-02 14:58:19 -05:00
Jason Wessel
ae6bf53e02 kgdb: use atomic_inc and atomic_dec instead of atomic_set
Memory barriers should be used for the kgdb cpu synchronization.  The
atomic_set() does not imply a memory barrier.

Reported-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2010-04-02 14:58:18 -05:00
Jason Wessel
62fae31219 kgdb: eliminate kgdb_wait(), all cpus enter the same way
This is a kgdb architectural change to have all the cpus (master or
slave) enter the same function.

A cpu that hits an exception (wants to be the master cpu) will call
kgdb_handle_exception() from the trap handler and then invoke a
kgdb_roundup_cpu() to synchronize the other cpus and bring them into
the kgdb_handle_exception() as well.

A slave cpu will enter kgdb_handle_exception() from the
kgdb_nmicallback() and set the exception state to note that the
processor is a slave.

Previously the salve cpu would have called kgdb_wait().  This change
allows the debug core to change cpus without resuming the system in
order to inspect arch specific cpu information.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2010-04-02 14:58:18 -05:00
Jason Wessel
cad08acebf kgdbts,sh: Add in breakpoint pc offset for superh
The kgdb test suite mimics the behavior of gdb.  For the sh
architecture the pc must be decremented by 2 for software breakpoint.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Acked-by: Paul Mundt <lethal@linux-sh.org>
2010-04-02 14:58:17 -05:00
Jason Wessel
a0279bd580 kgdb: have ebin2mem call probe_kernel_write once
Rather than call probe_kernel_write() one byte at a time, process the
whole buffer locally and pass the entire result in one go.  This way,
architectures that need to do special handling based on the length can
do so, or we only end up calling memcpy() once.

[sonic.zhang@analog.com: Reported original problem and preliminary patch]

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-04-02 14:58:17 -05:00
Frans Pop
91dd6c27a2 iwlwifi: remove trailing space in messages
Includes minor improvements in debugging messages in iwl-4965.c,
function iwl4965_is_temp_calib_needed().

Signed-off-by: Frans Pop <elendil@planet.nl>
Cc: Zhu Yi <yi.zhu@intel.com>
Cc: Reinette Chatre <reinette.chatre@intel.com>
Cc: Intel Linux Wireless <ilw@linux.intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-04-02 12:53:54 -07:00
Wey-Yi Guy
b744cb79ae iwlwifi: code cleanup for generic defines
Some defines used by all agn devices, but the definitions were in
iwl-4965-hw.h, move those to iwl-agn-hw.h which is the better place for
those.

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-04-02 12:52:17 -07:00
Wey-Yi Guy
d34a5a62da iwlwifi: deprecate "iwl4965" alias support
Internal alias support has been present in module-init-tools for some
time, the MODULE_ALIAS("iwl4965") boilerplate aliases can be removed.

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-04-02 12:52:02 -07:00
Zhu Yi
6aac74b40d iwlwifi: clear rxq->queue in queue reset
In iwl_rx_queue_reset(), we didn't clear the rxq->queue[]. This might
cause the same rxb appears on multiple places in rxq->queue. Although
this won't cause any problem because of the read and write pointers
protection in rxq, we'd better clear it to avoid misleading.

Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-04-02 12:50:37 -07:00
Wey-Yi Guy
bed2263feb iwlwifi: remove irrelevant comments
Removing irrelevant comments from iwl-agn.c

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-04-02 12:50:27 -07:00
Wey-Yi Guy
2b06861803 iwlwifi: merge module parameters into single place
Module parameters used to be defined in both iwl-5000.c and iwl-4965.c,
after the code re-structure, merge into iwl-agn.c for easy to read and
maintenance.

Number of module parameters are deprecated after this merge. These are also
scheduled for removal by 2.6.40.

The current supported parameters are:

 parm: debug50:50XX debug output mask (deprecated) (uint)
 parm: debug:debug output mask (uint)
 parm: swcrypto50:using crypto in software (default 0 [hardware])
(deprecated) (bool)
 parm: swcrypto:using crypto in software (default 0 [hardware]) (int)
 parm: queues_num50:number of hw queues in 50xx series (deprecated)
(int)
 parm: queues_num:number of hw queues. (int)
 parm: 11n_disable50:disable 50XX 11n functionality (deprecated) (int)
 parm: 11n_disable:disable 11n functionality (int)
 parm: amsdu_size_8K50:enable 8K amsdu size in 50XX series (deprecated)
(int)
 parm: amsdu_size_8K:enable 8K amsdu size (int)
 parm: fw_restart50:restart firmware in case of error (deprecated) (int)
 parm: fw_restart:restart firmware in case of error (int)
 parm: disable_hw_scan:disable hardware scanning (default 0) (int)

Remove "antenna" module parameter, it is not being used in "agn" driver.

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-04-02 12:50:06 -07:00
Tom Zanussi
b1dcc03cb8 perf/scripts: Tuple was set from long in both branches in python_process_event()
This is a fix to the signed/unsigned field handling in the
Python scripting engine, based on a patch from Roel Kluin.

Basically, Python wants to use a PyInt (which is internally a
long) if it can i.e. if the value will fit into that type.  If
not, it stores it into a PyLong, which isn't actually a long,
but an arbitrary-precision integer variable.

The code below is similar to to what Python does internally, and
it seems to work as expected on the x86 and x86_64 sytems I
tested it on.

Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Roel Kluin <roel.kluin@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: rostedt@goodmis.org
LKML-Reference: <1270184305.6422.10.camel@tropicana>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-04-02 21:32:16 +02:00
Arnaldo Carvalho de Melo
2aefa4f733 perf tools: sort_dimension__add shouldn't die
Propagate error instead.

LKML-Reference: <new-submission>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-04-02 16:28:35 -03:00
Arnaldo Carvalho de Melo
ad5b217b15 perf session: Remove one more exit() call from library code
Return NULL instead and make the caller propagate the error.

LKML-Reference: <new-submission>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-04-02 16:28:31 -03:00
Arnaldo Carvalho de Melo
b9fb930477 perf hist: Only allocate callchain_node if processing callchains
The struct callchain_node size is 120 bytes, that are never used when
there are no callchains or '-g none' is specified, so conditionally
allocate it, reducing sizeof(struct hist_entry) from 210 bytes to only
96, greatly speeding the non-callchain processing.

LKML-Reference: <new-submission>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-04-02 16:28:28 -03:00
Arnaldo Carvalho de Melo
71cf8b8ff7 perf kmem: Fixup the symbol address before using it
We get absolute addresses in the events, but relative ones from the
symbol subsystem, so calculate the absolute address by asking for the
map where the symbol was found, that has the place where the DSO was
actually loaded.

For the core kernel this poses no problems if the kernel is not
relocated by things like kexec, or if we use /proc/kallsyms, but for
modules we were getting really large, negative offsets.

LKML-Reference: <new-submission>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-04-02 16:28:25 -03:00
Arnaldo Carvalho de Melo
e727ca73f8 perf kmem: Resolve kernel symbols again
Due to the assumption in perf_session__new that the kernel maps would be
created using the fake PERF_RECORD_MMAP event in a perf.data file 'perf
kmem --stat caller', that doesn't have such event, ends up not being
able to resolve the kernel addresses.

Fix it by calling perf_session__create_kernel_maps() in __cmd_kmem().

LKML-Reference: <new-submission>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-04-02 16:28:20 -03:00