Commit graph

199,777 commits

Author SHA1 Message Date
Frans Pop
4c912c1a33 microblaze: remove trailing space in messages
Signed-off-by: Frans Pop <elendil@planet.nl>
Cc: microblaze-uclinux@itee.uq.edu.au
Cc: Michal Simek <monstr@monstr.eu>
Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-03-11 14:09:29 +01:00
Michal Simek
e786c6ad2b microblaze: Use generic show_mem()
Remove arch-specific show_mem() in favor of the generic version.
It is based on powerpc patch.
bda2fa5355

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-03-11 14:09:12 +01:00
Michal Simek
137d0795a7 microblaze: Change temp register for cmdline
For copy was used r7 register when CONFIG_CMDLINE_BOOL option
is enabled. But r7 stores pointer to fdt that's why machine_early_init
not detect compiled-in DTB.

I also moved kernel PID setup to have TLB init in one block

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-03-11 14:08:55 +01:00
Michal Simek
d79f3b06a9 microblaze: Preliminary support for dma drivers
I found several problems for ll_temac driver and on system with WB.
This early fix should fix it. I will clean this patch before I will add
it to mainline

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-03-11 14:08:33 +01:00
John Kacur
7ae5f21361 perf: Make the install relative to DESTDIR if specified
Without this change, the install path is relative to
prefix/DESTDIR where prefix is automatically set to $HOME.

This can produce unexpected results. For example:

  make -C tools/perf DESTDIR=/home/jkacur/tmp install-man

creates the directory:		/home/jkacur/home/jkacur/tmp/share/...
instead of the expected:	/home/jkacur/tmp/share/...

Signed-off-by: John Kacur <jkacur@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Kyle McMartin <kyle@redhat.com>
Cc: <stable@kernel.org>
LKML-Reference: <1268312220-12880-1-git-send-email-jkacur@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11 14:08:11 +01:00
Michal Simek
407c1da07d microblaze: Move cache function to cache.c
It is better to have init cache handling on one place.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-03-11 14:07:57 +01:00
Michal Simek
7775379057 microblaze: Add support from PREEMPT
This patch add core PREEMPT support for Microblaze.
I tried to trace it via tracers and I was able to see any output.

I also added low level debug functions to see if that code is called.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-03-11 14:07:32 +01:00
Masami Hiramatsu
83ff56f46a kprobes: Calculate the index correctly when freeing the out-of-line execution slot
From : Ananth N Mavinakayanahalli <ananth@in.ibm.com>

When freeing the instruction slot, the arithmetic to calculate
the index of the slot in the page needs to account for the total
size of the instruction on the various architectures.

Calculate the index correctly when freeing the out-of-line
execution slot.

Reported-by: Sachin Sant <sachinp@in.ibm.com>
Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
LKML-Reference: <4B9667AB.9050507@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11 14:06:16 +01:00
Michal Simek
733cc21831 microblaze: Add support for Xilinx PCI host bridge
This patch is based on powerpc patch
64f1650247

We did some cleanups and removed powerpc parts.
There is one new debug early listing function too.

Exclude function is only in Debug options.

We tested in on custom board.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-03-11 14:05:18 +01:00
Michal Simek
a6475c1322 microblaze: Enable PCI, missing files
There are two parts of changes. The first is just enable
PCI in Makefiles and in Kconfig. The second is the rest of
missing files. I didn't want to add it with previous patch
because that patch is too big.

Current Microblaze toolchain has problem with weak symbols
that's why is necessary to apply this changes to be possible
to compile pci support.
Xilinx knows about this problem.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-03-11 14:04:27 +01:00
Michal Simek
d3afa58c20 microblaze: Add core PCI files
Add pci-common.h and pci32.c. Files are based on PPC version.
There are removed ppc specific parts and the code was completely
clean.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-03-11 14:03:22 +01:00
Michal Simek
2ed975b43c microblaze: Add pci-bridge.h
Add pci-bridge.h for Microblaze. It is based on powerpc header file.
My changes:
I removed PPC_ prefix from constants
Removed ppc64 specifis parts

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-03-11 14:01:43 +01:00
Michal Simek
830980a0a8 microblaze: Add pci.h
Add pci.h for microblaze. It is based on powerpc pci.h

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-03-11 14:00:43 +01:00
Michal Simek
2ddafeab6f microblaze: io.h include asm-generic/iomap.h
I need to use generic/iomap.h for PCI that's why is necessary
to include it and fix ioport_{map,unmap} functions.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-03-11 14:00:09 +01:00
Dan Carpenter
ab3b3aa5dd sched: Cleanup: remove unused variable in try_to_wake_up()
We haven't used the "orig_rq" variable since
055a00865d "Fix/add missing update_rq_clock() calls"

Signed-off-by: Dan Carpenter <error27@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andreas Herrmann <andreas.herrmann3@amd.com>
Cc: Gautham R Shenoy <ego@in.ibm.com>
Cc: efault@gmx.de
LKML-Reference: <20100306111752.GL4958@bicker>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11 13:59:59 +01:00
Michal Simek
c6ba01a4c7 microblaze: Add irq_create_{of_,}mapping functions
Support function for PCI. We don't use any advance mapping mechanism
that's why implementation is simple.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-03-11 13:59:28 +01:00
Michal Simek
a84642a339 microblaze: Add {z,}alloc_maybe_bootmem functions
I will need {z,}alloc_maybe_bootmem functions for pci patches

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-03-11 13:59:02 +01:00
Michal Simek
2549edd353 microblaze: Implement __dma_sync_page
There is necessary to do some cache handling for dma operations.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-03-11 13:58:11 +01:00
Michal Simek
ccfe27d700 microblaze: Support DMA
Add DMA support for Microblaze. There are some part of this new feature:
1. Basic DMA support
2. Enable DMA debug option
3. Setup notifier

Ad 1. dma-mapping come from powerpc and x86 version and it is based on
generic dma-mapping-common.h

Ad 2. DMA support debug features which is used in generic file.
For more information please look at Documentation/DMA-API.txt

Ad 3. notifier is very important to setup dma_ops. Without this part
for example ll_temac driver failed because there are no setup dma operations.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-03-11 13:56:29 +01:00
Dimitri Sivanich
938179b4f8 x86: Improve Intel microcode loader performance
We've noticed that on large SGI UV system configurations,
running microcode.ctl can take very long periods of time.  This
is due to the large number of vmalloc/vfree calls made by the
Intel generic_load_microcode() logic.

By reusing allocated space, the following patch reduces the time
to run microcode.ctl on a 1024 cpu system from approximately 80
seconds down to 1 or 2 seconds.

Signed-off-by: Dimitri Sivanich <sivanich@sgi.com>
Acked-by: Dmitry Adamushko <dmitry.adamushko@gmail.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: Bill Davidsen <davidsen@tmr.com>
LKML-Reference: <20100305174203.GA19638@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11 13:49:06 +01:00
Ingo Molnar
915a0b575f Merge branch 'tip/tracing/core' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into tracing/urgent 2010-03-11 13:39:33 +01:00
Paul E. McKenney
f56e8a0765 x86/mce: Fix RCU lockdep splats
Create an rcu_dereference_check_mce() that checks for RCU-sched
read side and mce_read_mutex being held on update side.  Replace
uses of rcu_dereference() in arch/x86/kernel/cpu/mcheck/mce.c
with this new macro.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Cc: laijs@cn.fujitsu.com
Cc: dipankar@in.ibm.com
Cc: mathieu.desnoyers@polymtl.ca
Cc: josh@joshtriplett.org
Cc: dvhltc@us.ibm.com
Cc: niv@us.ibm.com
Cc: peterz@infradead.org
Cc: rostedt@goodmis.org
Cc: Valdis.Kletnieks@vt.edu
Cc: dhowells@redhat.com
LKML-Reference: <1267830207-9474-3-git-send-email-paulmck@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11 13:38:02 +01:00
Paul E. McKenney
007b09243b rcu: Increase RCU CPU stall timeouts if PROVE_RCU
CONFIG_PROVE_RCU imposes additional overhead on the kernel, so
increase the RCU CPU stall timeouts in an attempt to allow for
this effect.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: laijs@cn.fujitsu.com
Cc: dipankar@in.ibm.com
Cc: mathieu.desnoyers@polymtl.ca
Cc: josh@joshtriplett.org
Cc: dvhltc@us.ibm.com
Cc: niv@us.ibm.com
Cc: peterz@infradead.org
Cc: rostedt@goodmis.org
Cc: Valdis.Kletnieks@vt.edu
Cc: dhowells@redhat.com
LKML-Reference: <1267830207-9474-2-git-send-email-paulmck@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11 13:38:01 +01:00
Paul E. McKenney
3f379b03fb ftrace: Replace read_barrier_depends() with rcu_dereference_raw()
Replace the calls to read_barrier_depends() in
ftrace_list_func() with rcu_dereference_raw() to improve
readability.  The reason that we use rcu_dereference_raw() here
is that removed entries are never freed, instead they are simply
leaked.  This is one of a very few cases where use of
rcu_dereference_raw() is the long-term right answer.  And I
don't yet know of any others.  ;-)

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: laijs@cn.fujitsu.com
Cc: dipankar@in.ibm.com
Cc: mathieu.desnoyers@polymtl.ca
Cc: josh@joshtriplett.org
Cc: dvhltc@us.ibm.com
Cc: niv@us.ibm.com
Cc: peterz@infradead.org
Cc: Valdis.Kletnieks@vt.edu
Cc: dhowells@redhat.com
LKML-Reference: <1267830207-9474-1-git-send-email-paulmck@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11 13:38:01 +01:00
Paul Mackerras
a12b51c478 perf tools: Fix sparse CPU numbering related bugs
At present, the perf subcommands that do system-wide monitoring
(perf stat, perf record and perf top) don't work properly unless
the online cpus are numbered 0, 1, ..., N-1.  These tools ask
for the number of online cpus with sysconf(_SC_NPROCESSORS_ONLN)
and then try to create events for cpus 0, 1, ..., N-1.

This creates problems for systems where the online cpus are
numbered sparsely.  For example, a POWER6 system in
single-threaded mode (i.e. only running 1 hardware thread per
core) will have only even-numbered cpus online.

This fixes the problem by reading the /sys/devices/system/cpu/online
file to find out which cpus are online.  The code that does that is in
tools/perf/util/cpumap.[ch], and consists of a read_cpu_map()
function that sets up a cpumap[] array and returns the number of
online cpus.  If /sys/devices/system/cpu/online can't be read or
can't be parsed successfully, it falls back to using sysconf to
ask how many cpus are online and sets up an identity map in cpumap[].

The perf record, perf stat and perf top code then calls
read_cpu_map() in the system-wide monitoring case (instead of
sysconf) and uses cpumap[] to get the cpu numbers to pass to
perf_event_open.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Cc: Anton Blanchard <anton@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
LKML-Reference: <20100310093609.GA3959@brick.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11 13:36:53 +01:00
Thomas Gleixner
8a03ae2a5b block: drbd: Convert semaphore to mutex
The bm_change semaphore is semantically a mutex. Convert it to a real
mutex.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
2010-03-11 13:30:16 +01:00
Paul Mackerras
220b140b52 perf_event: Fix oops triggered by cpu offline/online
Anton Blanchard found that he could reliably make the kernel hit a
BUG_ON in the slab allocator by taking a cpu offline and then online
while a system-wide perf record session was running.

The reason is that when the cpu comes up, we completely reinitialize
the ctx field of the struct perf_cpu_context for the cpu.  If there is
a system-wide perf record session running, then there will be a struct
perf_event that has a reference to the context, so its refcount will
be 2.  (The perf_event has been removed from the context's group_entry
and event_entry lists by perf_event_exit_cpu(), but that doesn't
remove the perf_event's reference to the context and doesn't decrement
the context's refcount.)

When the cpu comes up, perf_event_init_cpu() gets called, and it calls
__perf_event_init_context() on the cpu's context.  That resets the
refcount to 1.  Then when the perf record session finishes and the
perf_event is closed, the refcount gets decremented to 0 and the
context gets kfreed after an RCU grace period.  Since the context
wasn't kmalloced -- it's part of a per-cpu variable -- bad things
happen.

In fact we don't need to completely reinitialize the context when the
cpu comes up.  It's sufficient to initialize the context once at boot,
but we need to do it for all possible cpus.

This moves the context initialization to happen at boot time.  With
this, we don't trash the refcount and the context never gets kfreed,
and we don't hit the BUG_ON.

Reported-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Tested-by: Anton Blanchard <anton@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: <stable@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11 12:43:51 +01:00
Kuninori Morimoto
960b3b4b4c ASoC: da7210: Add 11025/22050/44100/88200 rate support
This driver USE PLL for 11025/22050/44100/88200 rate.
To enable switching to bypass mode, PLL is always turned on.
Special thanks to Phil

Signed-off-by: Phil Edworthy <Phil.Edworthy@renesas.com>
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-03-11 10:58:33 +00:00
Wu Zhangjin
2d74b2c62c scripts/Makefile.lib: Align the output of LZO
The output of LZO is not aligned with the other output:
  ...
  CC      drivers/usb/mon/usbmon.mod.o
  LZO    arch/mips/boot/compressed/vmlinux.lzo
  ...

This patch fixes it.

Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-03-11 11:01:15 +01:00
Benjamin Marzinski
2e95e3f668 GFS2: Allow the number of committed revokes to temporarily be negative
GFS2 tracks the number of revokes and unrevokes that are part of committed
transactions via sd_log_commited_revoke. It is possible for one process to add
revokes during its transaction, while another process unrevokes them during its
transaction. If the second process finishes its transaction first,
sd_log_commited_revoke will be decremented by the number of unrevokes that the
second process did, without first being incremented by the number of revokes
the first process did. This is fine, since all started transactions must be
completed before the journal can be flushed.  However, sd_log_commited_revoke
is an unsigned integer, and log_refund() causes an assertion failure if it
would go negative at the end of a transaction.  This patch makes
sd_log_commited_revoke a signed integer and allows it to go negative.
__gfs2_log_flush() still checks that it mataches the actual number of revokes.

Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2010-03-11 09:50:46 +00:00
Mark Brown
afadb8e08c Input: wm831x-on - convert to use genirq
Now that the WM831x core has been converted to use genirq for the
interrupt controller there is no need for the client drivers to
use a WM831x-specific API rather than just calling genirq directly.

Also fixes a leak of the IRQ during init failure - the error path
free_irq() was using NULL rather than the driver data as the data
pointer so free_irq() wouldn't have matched.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-03-11 00:02:53 -08:00
Ranjith Lohithakshan
fdba2bb1f2 Input: ads7846 - add wakeup support
Add wakeup support to the ads7846 driver. Platforms can enable wakeup
capability by setting the wakeup flag in ads7846_platform_data. With this
patch the ads7846 driver can be used to wake the system from suspend.

Signed-off-by: Ranjith Lohithakshan <ranjithl@ti.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-03-11 00:02:43 -08:00
Vadim Zaliva
04b4b88cca Input: appletouch - fix integer overflow issue
When reading data from Geyser 2 touchpads used on post Oct 2005 Apple
PowerBooks the driver was casting X and Y coordinates values to
'signed char'. Testing on one of such PowerBooks I have noticed that
touchpad always generates positive values, but some of them are greater
that 127, and thus, when cast to 'signed char' being interpreted as
a negative.

Such bigger values have been observed infrequently, closer to the
edges of a touchpad, so the problem was not very visible.
Nevertheless, the patch would potentially improve touchpad
driver accuracy.

Signed-off-by: Vadim Zaliva <lord@crocodile.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-03-11 00:00:56 -08:00
Larry Finger
85373ee817 ssb: Export ssb_chipco_gpio_control - needed by N PHY code
The latest changes in the N PHY core require the symbol
ssb_chipco_gpio_control to be exported.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-10 17:53:51 -05:00
Andrew Blaich
e9f08381cb ath5k: fixing retries in ath5k_hw_setup_4word_tx_desc
The rate control algorithm, default is Minstrel for ath5k, determines
the number of retries to use for each rate.  However, there exists in
ath5k_hw_setup_4word_tx_desc (which is called for AR5212 like devices)
a set number of retries defined by AR5K_TUNE_HWTXTRIES.  The set
number of tries is added to the tx_tries0 variable setup by the rate
control algorithm.  This changes the number of retries the rate
control algorithm considers necessary.  By removing the
AR5K_TUNE_HWTXTRIES from the retry calculation the rate control
algorithm is given control over the number of retries.

Signed-off-by: Andrew Blaich <ablaich@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-10 17:44:46 -05:00
Felix Fietkau
d969847c22 ath9k: fix rate control tx status handling for A-MPDU
Currently the rate control tx status update gets called for every
subframe of an A-MPDU, and ath9k marks the frame with the relevant
status update with an internal flag. This not suitable for rate control
algorithms using the standard mac80211 rate control API, so fix this by
using IEEE80211_TX_STAT_AMPDU for marking the correct frames that
should be processed.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-10 17:44:45 -05:00
Teemu Paasikivi
7c3c76a82f wl1271: Changed wl1271_sdio to be selectable only on ARM
As wl1271_sdio implementation depends on ARM GPIO impelementation it is
not directly usable on other architectures at the moment. Added
ARM dependency to kernel configuration option.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com>
Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com>
Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-10 17:44:43 -05:00
Bruno Randolf
687c8ff12d ath5k: Minor EEPROM documentation updates
Here are some minor updates for EEPROM, mostly documentation and some small
fixes which have no effect at the moment.

- fixed_bias is not available for B mode.

- AR5K_EEPROM_[RT]X_CHAIN_DIS is 3 bit. this is MIMO and will not be used in
  ath5k, but just to be correct.

- AR5K_EEPROM_JAP_MID_EN added, and shift of following flags adapted.

- added some documentation for EEPROM values and some comments.

Signed-off-by: Bruno Randolf <br1@einfach.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-10 17:44:42 -05:00
Bruno Randolf
49a85d211a ath5k: IQ calibration for AR5211 is slightly different
according to the HAL sources the calculation of the Q value is slightly
different for AR5211 chips.

i couldn't test this since IQ calibration never finishes on older parts. this
is a different problem...

Signed-off-by: Bruno Randolf <br1@einfach.org>
Acked-by: Nick Kossifidis <mickflemm@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-10 17:44:40 -05:00
Bruno Randolf
7644395f8d ath5k: add debugfs file frameerrors
add a debugfs file to see different RX and TX errors as reported in our status
descriptors. this can help to diagnose driver problems.

statistics can be cleared by writing 'clear' into the frameerrors file.

example:

# cat /sys/kernel/debug/ath5k/phy0/frameerrors
RX
---------------------
CRC     27      (11%)
PHY     3       (1%)
FIFO    0       (0%)
decrypt 0       (0%)
MIC     0       (0%)
process 0       (0%)
jumbo   0       (0%)
[RX all 245]

TX
---------------------
retry   2       (9%)
FIFO    0       (0%)
filter  0       (0%)
[TX all 21]

Signed-off-by: Bruno Randolf <br1@einfach.org>
Acked-by: Nick Kossifidis <mickflemm@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-10 17:44:39 -05:00
Bruno Randolf
919154540a ath5k: remove ah_gpio_npins
it's never used and we have a newer implementation in gpio.c.

Signed-off-by: Bruno Randolf <br1@einfach.org>
Acked-by: Nick Kossifidis <mickflemm@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-10 17:44:37 -05:00
Bruno Randolf
a71bcebcb7 ath5k: remove ah_mac_revision
it's not used, and we have ah_mac_srev.

Signed-off-by: Bruno Randolf <br1@einfach.org>
Acked-by: Nick Kossifidis <mickflemm@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-10 17:44:36 -05:00
Bruno Randolf
ff5d96ce62 ath5k: remove ah_magic
it's never used. probably a leftover from the old OpenHAL days...

Signed-off-by: Bruno Randolf <br1@einfach.org>
Acked-by: Nick Kossifidis <mickflemm@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-10 17:44:34 -05:00
Bruno Randolf
ccfe5552ae ath5k: remove double opmode definition
opmode (operating mode) was defined in struct ath5k_hw and struct ath5k_softc.
remove it from ath5k_hw and use only from ath5k_softc (sc->opmode).

(btw: what's the meaning of opmode when we have multiple interfaces?)

Signed-off-by: Bruno Randolf <br1@einfach.org>
Acked-by: Nick Kossifidis <mickflemm@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-10 17:44:33 -05:00
Bruno Randolf
caec9112d6 ath5k: preserve antenna settings
save antenna settings and preserve across resets.

Signed-off-by: Bruno Randolf <br1@einfach.org>
Acked-by: Nick Kossifidis <mickflemm@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-10 17:44:32 -05:00
Bruno Randolf
604eeadd18 ath5k: add antenna statistics and debugfs file for antenna settings
keep statistics about which antenna was used for TX and RX. this is used only
for debugging right now, but might have other applications later.

add a new file 'antenna' in debugfs (/sys/kernel/debug/ath5k/phy0/antenna) to show
antenna use statistics and antenna diversity related register values. it can
also be used to set the antenna mode until we have proper support for that in
iw:
  - echo diversity > antenna: use default antenna mode (RX and TX diversity)
  - echo fixed-a > antenna: use fixed antenna A for RX and TX
  - echo fixed-b > antenna: use fixed antenna B for RX and TX
  - echo clear > antenna: reset antenna statistics

Signed-off-by: Bruno Randolf <br1@einfach.org>
Acked-by: Nick Kossifidis <mickflemm@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-10 17:44:30 -05:00
Jussi Kivilinna
5a7d05830d rndis_wlan: Implement cfg80211 PMKSA API
Add support for cfg80211 set_pmksa/del_pmksa/flush_pmksa. Updating PMKID
entry list is done on driver side since NDIS API requires full list update.

v2:
 - fixed to use new netdev_dbg/warn/etc instead of old devdbg/warn/etc
 - fixed false padding from struct ndis_80211_bssid_info

Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-10 17:44:28 -05:00
Jussi Kivilinna
0308383f95 rndis_wlan: get max_num_pmkids from device
Extend rndis_wlan_get_caps() to get 802.11 capabilities and maximum
supported number of PMKIDs by device.

v2: fixed to use new netdev_dbg/warn/etc instead of old devdbg/warn/etc

Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-10 17:44:27 -05:00
Jussi Kivilinna
ea29d65ea4 rndis_wlan: remove unused variables from priv structure
Some variables were left unused after cfg80211 conversion. Remove those and related deadcode.

Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-10 17:44:26 -05:00
Jussi Kivilinna
80f8c5b434 rndis_wlan: copy only useful data from rndis_command respond
rndis_query_oid() uses full output buffer size to copy response buffer
from rndis_command()/device. This doesn't cause problems as response buffer
is sized based on output buffer but does copy extra unset bytes.
So change rndis_query_oid() so that only meaningful bytes are being copied.

Also in case of malfunctioning device/cable/etc returned data offset from
device might be wrong so bound check memory access correctly, so add
checks for this.

v2: fixed to use new netdev_dbg/warn/etc instead of old devdbg/warn/etc

Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-10 17:44:24 -05:00