Commit graph

199,777 commits

Author SHA1 Message Date
Jassi Brar
87b7eb266c ASoC: s3c64xx-i2s remove unncessary headers
s3c64xx-i2s remove unncessary headers

Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-03-10 11:59:56 +00:00
Jassi Brar
b568f84b30 ASoC: s3c-i2s-v2 remove unnecessary headers
s3c-i2s-v2 remove unnecessary headers

Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-03-10 11:59:56 +00:00
Jassi Brar
4793d6afbd ASoC: S3C: I2Sv2: Unify clock source IDs
Rather than having the multiple definitions of the same clocks,
define them in one common place and refer by SoC specific names.

Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-03-10 11:59:56 +00:00
Jassi Brar
0822661478 ASoC: S3C: I2Sv2: Add missing semicolon
Add missing semicolon after s3c2412_i2s_delay

Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-03-10 11:59:56 +00:00
Barry Song
f0d10f5aa3 ASoC: bf5xx-sport: use common SPORT code for MMR info
No point in duplicating this structure layout in each driver.

Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-03-10 11:59:56 +00:00
Cliff Cai
4b527e2900 ASoC: SSM2602: add SND control for mic boost2 and default it to off
Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-03-10 11:59:56 +00:00
Chaithrika U S
8d43d1bc81 ASoC: DaVinci: Add hw_param callback for S/PDIF DIT link
On TI DM6467 EVM, S/PDIF DIT codec fails to open as it is unable to install
hardware params. This dummy codec has no set_fmt and set_sysclk implementations
and calls from the application to these functions cause errors. This patch adds
a new hardware params callback function for S/PDIF transciever codec.

Signed-off-by: Chaithrika U S <chaithrika@ti.com>
Tested-by: Anuj Aggarwal <anuj.aggarwal@ti.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-03-10 11:59:56 +00:00
Michal Marek
73d1393eb8 kbuild: Generate modules.builtin in make modules_install
The previous approach didn't work if one did
make modules && make modules_install
Add modules.builtin as dependency of _modinst_, which is the target that
actually needs the file.

Reported-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-03-10 12:31:06 +01:00
Thomas Weber
5c1f96f4cf OMAP: DSS2: VRAM: Fix early_param for vram
In commit 2b0d8c251b the __early_param is
replaced with the generic early_param. This patch fixes the parameter passing
for the vram.

Signed-off-by: Thomas Weber <weber@corscience.de>
[tomi.valkeinen@nokia.com: changed the commit prefix]
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-03-10 13:15:45 +02:00
Huang Ying
18bcc9194d crypto: tcrypt - Speed testing support for ghash
Because ghash needs setkey, the setkey and keysize template support
for test_hash_speed is added.

Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-03-10 18:30:32 +08:00
Huang Ying
12387a46bb crypto: aesni-intel - Add AES-NI accelerated CTR mode
To take advantage of the hardware pipeline implementation of AES-NI
instructions. CTR mode cryption is implemented in ASM to schedule
multiple AES-NI instructions one after another. This way, some latency
of AES-NI instruction can be eliminated.

Performance testing based on dm-crypt should 50% reduction of
ecryption/decryption time.

Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-03-10 18:28:55 +08:00
Richard Hartmann
269ab459da crypto: internal - Fix checkpatch errors
Signed-off-by: Richard Hartmann <richih.mailinglist@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-03-10 18:24:46 +08:00
Paul Mundt
c7ed1ab3f7 serial: sh-sci: clkdev updates for MSTP gating.
This fixes up some of the I/D/F clock ambiguity in the sh-sci driver.
The interface clock in most cases just wraps back to the peripheral
clock, while the function clock wraps in to the MSTP bits. As the logic
was somewhat inverted, this cleans that up, and also enables all CPUs
with SCI MSTP bits to match function clocks through clkdev lookup.

As a result, this gets rid of the clk string abuse on the sh side, and
the clock string will be killed off once the ARM code has had a chance to
sync up. This also enables MSTP gating on CPUs like 7786 which had never
wired it up before. Impacted CPUs are primarily all SH-Mobiles, SH7785,
and SH7786.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-10 18:35:14 +09:00
Daniel Glöckner
55c63bd256 ALSA: provide a more useful get_unmapped_area handler for pcm
Shared memory mappings on nommu machines require a get_unmapped_area
file operation that suggests an address for the mapping. The current
implementation returns 0 and thus forces the driver to implement an
mmap handler that fixes up the start and end address of the vma.

This patch returns the address of the dma buffer, so it should work
out of the box for all drivers that use the snd_pcm_runtime->dma_area
pointer.

Addresses for mapping the status and control pages are returned as
well, but to make those work the conditional compilation of
snd_pcm_mmap_{status,control} would need to be revised.

URL: http://thread.gmane.org/gmane.linux.alsa.devel/61230
Signed-off-by: Daniel Glöckner <dg@emlix.com>
Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-03-10 09:05:03 +01:00
Takashi Iwai
0e49887703 Merge branch 'topic/misc' into for-linus 2010-03-10 09:01:30 +01:00
Takashi Iwai
7d39cf6224 Merge branch 'topic/hda' into for-linus 2010-03-10 09:01:25 +01:00
Paul Mundt
5b34d1ee1e sh: Export uncached helper symbols.
oprofile and others need to get at these, so provide symbol exports.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-10 16:46:58 +09:00
Paul Mundt
d28c145deb Merge branch 'sh/driver-core' into sh/clkfwk 2010-03-10 16:41:57 +09:00
Paul Mundt
089b43f973 sh: Fix up NUMA build for 29-bit.
pmb_bolt_mapping() is undefined on 29-bit builds, so provide a stub.
This fixes up the NUMA build on platforms lacking PMB support.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-10 16:29:48 +09:00
Paul Mundt
ec0ffe2ee0 sh: Kill off all timer name clobbering.
Now that dev_name() can be used early, we no longer require a static
string. Kill off all of the superfluous timer names.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-10 16:28:16 +09:00
Paul Mundt
214a607a4f clocksource: Use dev_name() universally across the SH drivers.
There is no need to copy in the name from the sh timer config now that
dev_name() is available early. We prefer the dev_name() variant for
consistent naming.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-10 16:26:25 +09:00
Michael Hennerich
4eb6f91b95 Input: ad7877 - increase pen up imeout
The time interval between consecutive interrupts depends on a number of
tunables: first_conversion_delay, acquisition_time, averaging and foremost
the pen_down_acc_interval.

Since the mod_timer() action for the PEN UP event happens in the
spi_async() callback function, latencies incurred by the spi bus drivers
also need to be taken into account.

So all in all, give the PEN UP event a bit more wiggle room and increase
timeout to 100ms.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-03-09 22:13:30 -08:00
Michael Hennerich
06a09124b5 Input: ads7846 - add support for AD7843 parts
The AD7873 is almost identical to the ADS7846; the only difference is
related to the Power Management bits PD0 and PD1.  This results in a
slightly different PENIRQ enable behavior.  For the AD7873, VREF should
be turned off during differential measurements.

So, add the AD7873/43 to the list of driver supported devices, and prevent
VREF usage during differential/ratiometric conversion modes.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-03-09 22:12:45 -08:00
Ben Skeggs
d544d623c5 drm/nv50: fix connector table parsing for some cards
The connector table index in the DCB entry for each output type is an
index into the connector table, and does *not* necessarily match up
with what was previously called "index" in the connector table entries
themselves.

Not real sure what that index is exactly, renamed to "index2" as we
still use it to prevent creating multiple TV connectors.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-03-10 16:11:11 +10:00
Mike Frysinger
9e49f6c133 Input: bf54x-keys - fix system hang when pressing a key
We need to use the nosync version of disable_irq so that we don't hang in
the IRQ handler as we don't ACK the interrupt until later.  This used to
work regardless, but at some point, the IRQ behavior changed.  Not sure
when exactly.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-03-09 22:09:07 -08:00
Maarten Maathuis
ce48fa93a6 drm/nv50: add a memory barrier to pushbuf submission
- This is useful for vram pushbuffers that are write combined.
- pre-nv50 has one too (in WRITE_PUT).

Signed-off-by: Maarten Maathuis <madman2003@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-03-10 16:07:35 +10:00
Maarten Maathuis
81441570c9 drm/nouveau: print a message very early during suspend
- In case of suspend lockups it's nice to know it happened in nouveau.

Signed-off-by: Maarten Maathuis <madman2003@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-03-10 16:07:27 +10:00
Francisco Jerez
e5ec882cfc drm/nv04-nv40: Fix up the programmed horizontal sync pulse delay.
The calculated values were a little bit off (~16 clocks), the only
effect it could have had is a slightly offset image with respect to
the blob on analog outputs (bug 26790).

Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-03-10 16:07:21 +10:00
Ben Skeggs
53c44c3a06 drm/nouveau: Gigabyte NX85T connector table lies, it has DVI-I not HDMI
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-03-10 16:07:14 +10:00
Ben Skeggs
da647d5bf3 drm/nouveau: add option to allow override of dcb connector table types
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-03-10 16:07:07 +10:00
Marcin Kościelnicki
304424e17d drm/nv50: Improve PGRAPH interrupt handling.
This makes nouveau recognise and report more kinds of PGRAPH errors, as
well as prevent GPU lockups resulting from some of them.

Lots of guesswork was involved and some part of this is probably
incorrect. Some potential-lockuop situations are handled by just
resetting a whole PGRAPH subunit, which doesn't sound like a "proper"
solution, but seems to work just fine... for now.

Signed-off-by: Marcin Kościelnicki <koriakin@0x04.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-03-10 16:07:02 +10:00
Marcin Kościelnicki
3bf777bf0a drm/nv50: Make ctxprog wait until interrupt handler is done.
This will fix races between generated ctxprogs and interrupt handler.

Signed-off-by: Marcin Kościelnicki <koriakin@0x04.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-03-10 16:06:57 +10:00
Marcin Kościelnicki
c82b88d578 drm/nouveau: Fix fbcon corruption with font width not divisible by 8
NV50 is nice and has a switch that autoaligns stuff for us. Pre-NV50,
we need to align input bitmap width manually.

Signed-off-by: Marcin Kościelnicki <koriakin@0x04.net>
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-03-10 16:06:44 +10:00
Marcin Kościelnicki
37000d2757 drm/nv50: Remove redundant/incorrect ctxvals initialisation.
11c/004 offset corresponds to PGRAPH reg 0x400828, and is initialised
earlier anyway by both our ctxprog generator and blob ctxvals. It's
actually incorrect with the generator, since we use different layout
on pre-NVA0.

Signed-off-by: Marcin Kościelnicki <koriakin@0x04.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-03-10 16:06:40 +10:00
Thomas Bächler
eb8bff85c5 Input: alps - add support for the touchpad on Toshiba Tecra A11-11L
Signed-off-by: Thomas Bächler <thomas@archlinux.org>
Cc: stable@kernel.org
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-03-09 22:06:07 -08:00
Arnd Bergmann
2f2177c8da Input: remove BKL, fix input_open_file() locking
Holding the BKL in input_open_file seems pointless because it does not
protect against updates of input_table, and all open functions from the
underlying drivers have proper mutex locking.

This makes input_open_file take the input_mutex when accessing
the table and no lock when calling into the lower function.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-03-09 22:05:57 -08:00
Thadeu Lima de Souza Cascardo
77554b4d1f Input: serio_raw - remove BKL
serio_raw open function already uses a mutex. Also change formatting
a bit.

Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-03-09 22:05:48 -08:00
Thadeu Lima de Souza Cascardo
c90c6a885a Input: mousedev - remove BKL
There's no need for BKL in mousedev, relevan protection is provided by
a private mutex.

Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-03-09 22:05:09 -08:00
H Hartley Sweeten
a19c5bbefb security/ima: replace gcc specific __FUNCTION__ with __func__
As noted by checkpatch.pl, __func__ should be used instead of gcc
specific __FUNCTION__.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: James Morris <jmorris@namei.org>
2010-03-10 15:59:54 +11:00
Paul Mundt
a636ee7fb3 driver core: Early dev_name() support.
Presently early platform devices suffer from the fact they are unable to
use dev_xxx() calls early on due to dev_name() and others being
unavailable at the time ->probe() is called.

This implements early init_name construction from the matched name/id
pair following the semantics of the late device/driver match. As a
result, matched IDs (inclusive of requested ones) are preserved when the
handoff from the early platform code happens at kobject initialization
time.

Since we still require kmalloc slabs to be available at this point, using
kstrdup() for establishing the init_name works fine. This subsequently
needs to be tested from dev_name() prior to the init_name being cleared
by the driver core. We don't kfree() since others will already have a
handle on the string long before the kobject initialization takes place.

This is also needed to permit drivers to use the clock framework early,
without having to manually construct their own device IDs from the match
id/name pair locally (needed by the early console and timer code on sh
and arm).

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-10 13:08:32 +09:00
Peter Huewe
04e82ffb0f serial: sh-sci: Fix build failure for non-sh architectures.
This patch fixes a build failure for various arm based defconfigs
[1][2][3] and maybe other architectures/configs.

The build failure was introduced by the sh specific patch [4]
"serial: sh-sci: Add DMA support"
by Guennadi Liakhovetski

Patch against linux-next of 20100309

References:
[1] http://kisskb.ellerman.id.au/kisskb/buildresult/2248992/
[2] http://kisskb.ellerman.id.au/kisskb/buildresult/2248996/
[3] http://kisskb.ellerman.id.au/kisskb/buildresult/2248998/
[4] http://git.kernel.org/?p=linux/kernel/git/sfr/linux-next.git;a=commit;h=73a19e4c0301908ce6346715fd08a74308451f5a

Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-10 11:55:05 +09:00
Tony Lindgren
d2197e1e60 omap3: Fix compile for Touch Book early_param
Commit 2b0d8c251b changed ARM to use
the common early_param code. Fix compile for Touch Book accordingly.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-03-09 16:39:58 -08:00
Reinette Chatre
1382c71c76 Revert "iwlwifi: Send broadcast probe request only when asked to"
This reverts commit 21b2d8bd2f.

As explained by Johannes:
When we
build a probe request frame in the buffer with the SSID, we could
arrive over the limit of 200 bytes. When we build it in the buffer
without the SSID (wildcard) we don't arrive over 200 bytes, but the
ucode still allows direct probe in addition because it has an internal
buffer that is larger when it inserts the SSID...

Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-03-09 16:16:04 -08:00
Reinette Chatre
1d79e53c56 iwl3945: fix memory corruption
Recent patch "iwlwifi: move 3945 clip groups to 3945 data" exposed a memory
corruption problem. When initializing the clip groups the code was
mistakenly using the iwlagn rate count, not the 3945 rate count. This
resulted in more memory being written than was allocated.

"iwlwifi: move 3945 clip groups to 3945 data" moved the location where the
clip groups are stored and the impact is now severe in that the number of
configured TX queues is modified. Previously the
"temperature" field was overwritten, which did not seem to affect the
operation.

Fix this one instance where wrong rate count was used. I also noticed one
more location where the iwlagn rate count was used to index an iwl3945
array, fix this. I also modified one location that modified the iwlagn rate
count to obtain the iwl3945 rate count ... just use the iwl3945 rate count
directly.

This fixes http://bugzilla.intellinuxwireless.org/show_bug.cgi?id=2165 and
http://bugzilla.intellinuxwireless.org/show_bug.cgi?id=2168

Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-03-09 16:15:33 -08:00
Abhijeet Kolekar
75a9a92625 iwl3945: check ucode load error code
Check successful completion of BSM loading. Give a chance to
load BSM again. If BSM loading is unsuccessful we should exit
and not initilize NIC. Before this checking even if the BSM loading failed
driver tries to initilize the NIC which should not be the case.

Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-03-09 16:13:25 -08:00
Johannes Berg
edc1a3a090 iwlwifi: clean up queue/fifo handling
4965 hardware has 7 queues reserved and the
remaining ones used for aggregation, 5000
and higher need to have 10 reserved. This
is not very clear in the code right now,
unfortunately.

Introduce a new IWL_TX_FIFO_UNUSED constant
and make the queue/FIFO mapping arrays able
to hold that value, and change the setup
code to reserve all queues in the arrays
(the queue number is the index) and use the
new unused constant to not map those queues
to any FIFO.

Additionally, clear up the AC/queue mapping
code to be more understandable. The mapping
is the identity mapping right now, but with
the mapping function I think it's easier to
understand what happens there.

Finally, HCCA isn't implemented at all and
I think newer microcode removed it, so let's
remove all mention of it in the code, some
comments remain for 4965.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-by: Shanyu Zhao <shanyu.zhao@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-03-09 16:13:11 -08:00
Wey-Yi Guy
4f4d4088b0 iwlwifi: add internal short scan support for 3945
Add internal short scan support for 3945 NIC, This allows 3945 NIC
to support radio reset request like the other series of NICs.

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-03-09 16:12:57 -08:00
Wey-Yi Guy
13115ba76b iwlwifi: remove unnecessary parameter in scan function
small change to remove unnecessary "ret" parameter since it not being
used.

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-03-09 16:12:47 -08:00
Wey-Yi Guy
9856b7fa36 iwlwifi: remove duplicate function
"internal_scan" debugfs function serves the same propose of mode "0" of
"force_reset" debugfs function. Remove it to avoid duplicate.

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-03-09 16:12:34 -08:00
Reinette Chatre
f8e200de3a iwlwifi: remove needlessly exported symbols
iwl_apm_stop_master and iwl_internal_short_hw_scan
are only used within iwlcore and thus do not need to be exported.

Reported-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-03-09 16:12:18 -08:00