Jiri Olsa says:
====================
this patchset allows sleepable programs to use tail calls.
At the moment we need to have separate sleepable uprobe program
to retrieve user space data and pass it to complex program with
tail calls. It'd be great if the program with tail calls could
be sleepable and do the data retrieval directly.
====================
Link: https://patch.msgid.link/20260130081208.1130204-1-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding test that makes sure we can't mix sleepable and non-sleepable
bpf programs in the BPF_MAP_TYPE_PROG_ARRAY map and that we can do
tail call in the sleepable program.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20260130081208.1130204-3-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Allowing sleepable programs to use tail calls.
Making sure we can't mix sleepable and non-sleepable bpf programs
in tail call map (BPF_MAP_TYPE_PROG_ARRAY) and allowing it to be
used in sleepable programs.
Sleepable programs can be preempted and sleep which might bring
new source of race conditions, but both direct and indirect tail
calls should not be affected.
Direct tail calls work by patching direct jump to callee into bpf
caller program, so no problem there. We atomically switch from nop
to jump instruction.
Indirect tail call reads the callee from the map and then jumps to
it. The callee bpf program can't disappear (be released) from the
caller, because it is executed under rcu lock (rcu_read_lock_trace).
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20260130081208.1130204-2-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Convert the Android Goldfish Battery binding to DT schema format.
Move the file to the power/supply directory to match the subsystem.
Update the example node name to 'battery' to comply with generic node
naming standards.
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260113092602.3197681-5-visitorckw@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
On the Dell Latitude 7455, the firmware uses "LiP" with a lowercase 'i'
for the battery chemistry type, but only all-uppercase "LIP" was being
recognized. Add the CamelCase variant to the check to fix the "Unknown
battery technology" warning.
Fixes: 202ac22b8e ("power: supply: qcom_battmgr: Add lithium-polymer entry")
Signed-off-by: Val Packett <val@packett.cool>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260120235831.479038-1-val@packett.cool
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
- don't call into pinctrl when setting direction in gpio-rockchip as it's
not needed and may trigger locking context errors
- change spinlock to raw_spinlock in gpio-sprd
- fix a use-after-free bug in gpio-virtuser
- don't register a driver from another driver's probe() in gpio-omap
- fix int width problems in GPIO ACPI code
- fix interrupt-to-pin mapping in gpio-brcmstb
- mask interrupts in irq shutdown in gpio-pca953x
-----BEGIN PGP SIGNATURE-----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=KCJE
-----END PGP SIGNATURE-----
Merge tag 'gpio-fixes-for-v6.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
"Over the last week I received quite an unexpected (for rc7) number of
fixes but they are all pretty small and mostly limited to drivers:
- don't call into pinctrl when setting direction in gpio-rockchip as
it's not needed and may trigger locking context errors
- change spinlock to raw_spinlock in gpio-sprd
- fix a use-after-free bug in gpio-virtuser
- don't register a driver from another driver's probe() in gpio-omap
- fix int width problems in GPIO ACPI code
- fix interrupt-to-pin mapping in gpio-brcmstb
- mask interrupts in irq shutdown in gpio-pca953x"
* tag 'gpio-fixes-for-v6.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpiolib: acpi: Fix potential out-of-boundary left shift
gpio: brcmstb: correct hwirq to bank map
gpio: omap: do not register driver in probe()
gpio: pca953x: mask interrupts in irq shutdown
gpio: virtuser: fix UAF in configfs release path
gpiolib: acpi: use BIT_ULL() for u64 mask in address space handler
gpio: sprd: Change sprd_gpio lock to raw_spin_lock
gpio: rockchip: Stop calling pinctrl for set_direction
Using the `devm_` variant for requesting IRQ _before_ the `devm_`
variant for allocating/registering the `extcon` handle, means that the
`extcon` handle will be deallocated/unregistered _before_ the interrupt
handler (since `devm_` naturally deallocates in reverse allocation
order). This means that during removal, there is a race condition where
an interrupt can fire just _after_ the `extcon` handle has been
freed, *but* just _before_ the corresponding unregistration of the IRQ
handler has run.
This will lead to the IRQ handler calling `extcon_set_state_sync()` with
a freed `extcon` handle. Which usually crashes the system or otherwise
silently corrupts the memory...
Fix this racy use-after-free by making sure the IRQ is requested _after_
the registration of the `extcon` handle.
Fixes: f8d7a3d211 ("power: supply: Add driver for pm8916 lbc")
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
Reviewed-by: Nikita Travkin <nikita@trvn.ru>
Link: https://patch.msgid.link/e2a4cd2fcd42b6cd97d856c17c097289a2aed393.1769163273.git.waqar.hameed@axis.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The amdxdna_ubuf_map() function allocates memory for sg and
internal sg table structures, but it fails to free them if subsequent
operations (sg_alloc_table_from_pages or dma_map_sgtable) fail.
Fixes: bd72d4acda ("accel/amdxdna: Support user space allocated buffer")
Signed-off-by: Zishun Yi <zishun.yi.dev@gmail.com>
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Reviewed-by: Min Ma <mamin506@gmail.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260129171022.68578-1-zishun.yi.dev@gmail.com
Running jobs on a hardware context while it is in the process of
releasing resources can lead to use-after-free and crashes.
Fix this by stopping job scheduling before calling
aie2_release_resource() and restarting it after the release completes.
Additionally, aie2_sched_job_run() now checks whether the hardware
context is still active.
Fixes: 4fd6ca90fc ("accel/amdxdna: Refactor hardware context destroy routine")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260130003255.2083255-1-lizhi.hou@amd.com
Some tests trigger a crash in iommu_sva_unbind_device() due to
accessing iommu_mm after the associated mm structure has been
freed.
Fix this by taking an explicit reference to the mm structure
after successfully binding the device, and releasing it only
after the device is unbound. This ensures the mm remains valid
for the entire SVA bind/unbind lifetime.
Fixes: be462c97b7 ("accel/amdxdna: Add hardware context")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260128002356.1858122-1-lizhi.hou@amd.com
During testing, restart occasionally failed on Toradex modules.
The issue was traced to an interaction between the EC-based reset/poweroff
handler and the PSCI restart handler. While the embedded controller is
resetting or powering off the module, the PSCI code may still be invoked,
triggering an I2C transaction to the PMIC. This can leave the PMIC I2C
in a frozen state.
Add a delay after issuing the EC reset or power-off command to give the
controller time to complete the operation and avoid falling back to another
restart/poweroff provider.
Also print an error message if sending the command to the embedded controller
fails.
Fixes: 18672fe123 ("power: reset: add Toradex Embedded Controller")
Cc: stable@vger.kernel.org
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://patch.msgid.link/20260130071208.1184239-1-ghidoliemanuele@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
A semicolon was mistakenly placed at the end of 'if' statements.
If example is copied as-is, it would lead to the subsequent return
being executed unconditionally, which is incorrect, and the rest of the
function would never be reached.
Signed-off-by: Patrick Little <plittle@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
[ rjw: Subject adjustment ]
Link: https://patch.msgid.link/20260128-documentation-fix-grammar-v1-2-39238dc471f9@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Fix typos in documentation related to energy model management.
Signed-off-by: Patrick Little <plittle@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
[ rjw: Subject and changelog edits ]
Link: https://patch.msgid.link/20260128-documentation-fix-grammar-v1-1-39238dc471f9@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There are cases in which decisions made by the teo governor are
arguably overly conservative.
For instance, suppose that there are 4 idle states and the values of
the intercepts metric for the first 3 of them are 400, 250, and 251,
respectively. If the total sum computed in teo_update() is 1000, the
governor will select idle state 1 (provided that all idle states are
enabled and the scheduler tick has not been stopped) although arguably
idle state 0 would be a better choice because the likelihood of getting
an idle duration below the target residency of idle state 1 is greater
than the likelihood of getting an idle duration between the target
residency of idle state 1 and the target residency of idle state 2.
To address this, refine the candidate idle state lookup based on
intercepts to start at the state with the maximum intercepts metric,
below the deepest enabled one, to avoid the cases in which the search
may stop before reaching that state.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
[ rjw: Fixed typo "intercetps" in new comments (3 places) ]
Link: https://patch.msgid.link/2417298.ElGaqSPkdT@rafael.j.wysocki
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
If differences between target residency values of adjacent idle states
of a given CPU are relatively large, the corresponding idle state bins
used by the teo governors are large either and the rule by which hits
are distinguished from intercepts is inaccurate.
Namely, by that rule, a wakeup event is classified as a hit if the
sleep length (the time till the closest timer other than the tick)
and the measured idle duration, adjusted for the entered idle state
exit latency, fall into the same idle state bin. However, if that bin
is large enough, the actual difference between the sleep length and
the measured idle duration may be significant. It may in fact be
significantly greater than the analogous difference for an event where
the sleep length and the measured idle duration fall into different
bins.
For this reason, amend the rule in question with a check that will only
allow a wakeup event to be counted as a hit if the sleep length is less
than the "raw" measured idle duration (which means that the wakeup
appears to have occurred after the anticipated timer event). Otherwise,
the event will be counted as an intercept.
Also update the documentation part explaining the difference between
"hits" and "intercepts" to take the above change into account.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Link: https://patch.msgid.link/5093379.31r3eYUQgx@rafael.j.wysocki
Previously program_hpx_type2() applied PCIe settings unconditionally,
which could incorrectly change bits like Extended Tag Field Enable and
Enable Relaxed Ordering.
When _HPX was added to ACPI r3.0, the intent of the PCIe Setting
Record (Type 2) in sec 6.2.7.3 was to configure AER registers when the
OS does not own the AER Capability:
The PCI Express setting record contains ... [the AER] Uncorrectable
Error Mask, Uncorrectable Error Severity, Correctable Error Mask
... to be used when configuring registers in the Advanced Error
Reporting Extended Capability Structure ...
OSPM [1] will only evaluate _HPX with Setting Record – Type 2 if
OSPM is not controlling the PCI Express Advanced Error Reporting
capability.
ACPI r3.0b, sec 6.2.7.3, added more AER registers, including registers
in the PCIe Capability with AER-related bits, and the restriction that
the OS use this only when it owns PCIe native hotplug:
... when configuring PCI Express registers in the Advanced Error
Reporting Extended Capability Structure *or PCI Express Capability
Structure* ...
An OS that has assumed ownership of native hot plug but does not
... have ownership of the AER register set must use ... the Type 2
record to program the AER registers ...
However, since the Type 2 record also includes register bits that
have functions other than AER, the OS must ignore values ... that
are not applicable.
Restrict program_hpx_type2() to only the intended purpose:
- Apply settings only when OS owns PCIe native hotplug but not AER,
- Only touch the AER-related bits (Error Reporting Enables) in Device
Control
- Don't touch Link Control at all, since nothing there seems AER-related,
but log _HPX settings for debugging purposes
Note that Read Completion Boundary is now configured elsewhere, since it is
unrelated to _HPX.
[1] Operating System-directed configuration and Power Management
Fixes: 40abb96c51 ("[PATCH] pciehp: Fix programming hotplug parameters")
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260129175237.727059-3-haakon.bugge@oracle.com
Commit e42010d820 ("PCI: Set Read Completion Boundary to 128 iff Root
Port supports it (_HPX)") worked around a bogus _HPX type 2 record, which
caused program_hpx_type2() to set the RCB in an endpoint even though the
Root Port did not have the RCB bit set.
e42010d820 fixed that by setting the RCB in the endpoint only when it was
set in the Root Port.
In retrospect, program_hpx_type2() is intended for AER-related settings,
and the RCB should be configured elsewhere so it doesn't depend on the
presence or contents of an _HPX record.
Explicitly program the RCB from pci_configure_device() so it matches the
Root Port's RCB. The Root Port may not be visible to virtualized guests;
in that case, leave RCB alone.
Fixes: e42010d820 ("PCI: Set Read Completion Boundary to 128 iff Root Port supports it (_HPX)")
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260129175237.727059-2-haakon.bugge@oracle.com
The resizable BAR support added by the commit 3a3d4cabe6 ("PCI: dwc: ep:
Allow EPF drivers to configure the size of Resizable BARs") incorrectly
configures the resizable BARs only for the first Physical Function (PF0)
in EP mode.
The resizable BAR configuration functions use generic dw_pcie_*_dbi()
operations instead of physical function specific dw_pcie_ep_*_dbi()
operations. This causes resizable BAR configuration to always target
PF0 regardless of the requested function number.
Additionally, dw_pcie_ep_init_non_sticky_registers() only initializes
resizable BAR registers for PF0, leaving other PFs unconfigured during
the execution of this function.
Fix this by using physical function specific configuration space access
operations throughout the resizable BAR code path and initializing
registers for all the physical functions that support resizable BARs.
Fixes: 3a3d4cabe6 ("PCI: dwc: ep: Allow EPF drivers to configure the size of Resizable BARs")
Signed-off-by: Aksh Garg <a-garg7@ti.com>
[mani: added stable tag]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260130115516.515082-2-a-garg7@ti.com
Add bar{0,1,2,3,4,5}_size attributes in configfs, so that the user is not
restricted to run pci-epf-test with the hardcoded BAR size values defined
in pci-epf-test.c.
This code is shamelessly more or less copy pasted from pci-epf-vntb.c
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Koichiro Den <den@valinux.co.jp>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260130113038.2143947-2-cassel@kernel.org
The i40e driver calls udp_tunnel_get_rx_info() during i40e_open().
This is redundant because UDP tunnel RX offload state is preserved
across device down/up cycles. The udp_tunnel core handles
synchronization automatically when required.
Furthermore, recent changes in the udp_tunnel infrastructure require
querying RX info while holding the udp_tunnel lock. Calling it
directly from the ndo_open path violates this requirement,
triggering the following lockdep warning:
Call Trace:
<TASK>
? __udp_tunnel_nic_assert_locked+0x39/0x40 [udp_tunnel]
i40e_open+0x135/0x14f [i40e]
__dev_open+0x121/0x2e0
__dev_change_flags+0x227/0x270
dev_change_flags+0x3d/0xb0
devinet_ioctl+0x56f/0x860
sock_do_ioctl+0x7b/0x130
__x64_sys_ioctl+0x91/0xd0
do_syscall_64+0x90/0x170
...
</TASK>
Remove the redundant and unsafe call to udp_tunnel_get_rx_info() from
i40e_open() resolve the locking violation.
Fixes: 1ead750109 ("udp_tunnel: remove rtnl_lock dependency")
Signed-off-by: Mohammad Heib <mheib@redhat.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The ice driver calls udp_tunnel_get_rx_info() during ice_open_internal().
This is redundant because UDP tunnel RX offload state is preserved
across device down/up cycles. The udp_tunnel core handles
synchronization automatically when required.
Furthermore, recent changes in the udp_tunnel infrastructure require
querying RX info while holding the udp_tunnel lock. Calling it
directly from the ndo_open path violates this requirement,
triggering the following lockdep warning:
Call Trace:
<TASK>
ice_open_internal+0x253/0x350 [ice]
__udp_tunnel_nic_assert_locked+0x86/0xb0 [udp_tunnel]
__dev_open+0x2f5/0x880
__dev_change_flags+0x44c/0x660
netif_change_flags+0x80/0x160
devinet_ioctl+0xd21/0x15f0
inet_ioctl+0x311/0x350
sock_ioctl+0x114/0x220
__x64_sys_ioctl+0x131/0x1a0
...
</TASK>
Remove the redundant and unsafe call to udp_tunnel_get_rx_info() from
ice_open_internal() to resolve the locking violation
Fixes: 1ead750109 ("udp_tunnel: remove rtnl_lock dependency")
Signed-off-by: Mohammad Heib <mheib@redhat.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The E825 hardware currently has each PF handle the PFINT_TSYN_TX cause of
the miscellaneous OICR interrupt vector. The actual interrupt cause
underlying this is shared by all ports on the same quad:
┌─────────────────────────────────┐
│ │
│ ┌────┐ ┌────┐ ┌────┐ ┌────┐ │
│ │PF 0│ │PF 1│ │PF 2│ │PF 3│ │
│ └────┘ └────┘ └────┘ └────┘ │
│ │
└────────────────▲────────────────┘
│
│
┌────────────────┼────────────────┐
│ PHY QUAD │
└───▲────────▲────────▲────────▲──┘
│ │ │ │
┌───┼──┐ ┌───┴──┐ ┌───┼──┐ ┌───┼──┐
│Port 0│ │Port 1│ │Port 2│ │Port 3│
└──────┘ └──────┘ └──────┘ └──────┘
If multiple PFs issue Tx timestamp requests near simultaneously, it is
possible that the correct PF will not be interrupted and will miss its
timestamp. Understanding why is somewhat complex.
Consider the following sequence of events:
CPU 0:
Send Tx packet on PF 0
...
PF 0 enqueues packet with Tx request CPU 1, PF1:
... Send Tx packet on PF1
... PF 1 enqueues packet with Tx request
HW:
PHY Port 0 sends packet
PHY raises Tx timestamp event interrupt
MAC raises each PF interrupt
CPU 0, PF0: CPU 1, PF1:
ice_misc_intr() checks for Tx timestamps ice_misc_intr() checks for Tx timestamp
Sees packet ready bit set Sees nothing available
... Exits
...
...
HW:
PHY port 1 sends packet
PHY interrupt ignored because not all packet timestamps read yet.
...
Read timestamp, report to stack
Because the interrupt event is shared for all ports on the same quad, the
PHY will not raise a new interrupt for any PF until all timestamps are
read.
In the example above, the second timestamp comes in for port 1 before the
timestamp from port 0 is read. At this point, there is no longer an
interrupt thread running that will read the timestamps, because each PF has
checked and found that there was no work to do. Applications such as ptp4l
will timeout after waiting a few milliseconds. Eventually, the watchdog
service task will re-check for all quads and notice that there are
outstanding timestamps, and issue a software interrupt to recover. However,
by this point it is far too late, and applications have already failed.
All of this occurs because of the underlying hardware behavior. The PHY
cannot raise a new interrupt signal until all outstanding timestamps have
been read.
As a first step to fix this, switch the E825C hardware to the
ICE_PTP_TX_INTERRUPT_ALL mode. In this mode, only the clock owner PF will
respond to the PFINT_TSYN_TX cause. Other PFs disable this cause and will
not wake. In this mode, the clock owner will iterate over all ports and
handle timestamps for each connected port.
This matches the E822 behavior, and is a necessary but insufficient step to
resolve the missing timestamps.
Even with use of the ICE_PTP_TX_INTERRUPT_ALL mode, we still sometimes miss
a timestamp event. The ice_ptp_tx_tstamp_owner() does re-check the ready
bitmap, but does so before re-enabling the OICR interrupt vector. It also
only checks the ready bitmap, but not the software Tx timestamp tracker.
To avoid risk of losing a timestamp, refactor the logic to check both the
software Tx timestamp tracker bitmap *and* the hardware ready bitmap.
Additionally, do this outside of ice_ptp_process_ts() after we have already
re-enabled the OICR interrupt.
Remove the checks from the ice_ptp_tx_tstamp(), ice_ptp_tx_tstamp_owner(),
and the ice_ptp_process_ts() functions. This results in ice_ptp_tx_tstamp()
being nothing more than a wrapper around ice_ptp_process_tx_tstamp() so we
can remove it.
Add the ice_ptp_tx_tstamps_pending() function which returns a boolean
indicating if there are any pending Tx timestamps. First, check the
software timestamp tracker bitmap. In ICE_PTP_TX_INTERRUPT_ALL mode, check
*all* ports software trackers. If a tracker has outstanding timestamp
requests, return true. Additionally, check the PHY ready bitmap to confirm
if the PHY indicates any outstanding timestamps.
In the ice_misc_thread_fn(), call ice_ptp_tx_tstamps_pending() just before
returning from the IRQ thread handler. If it returns true, write to
PFINT_OICR to trigger a PFINT_OICR_TSYN_TX_M software interrupt. This will
force the handler to interrupt again and complete the work even if the PHY
hardware did not interrupt for any reason.
This results in the following new flow for handling Tx timestamps:
1) send Tx packet
2) PHY captures timestamp
3) PHY triggers MAC interrupt
4) clock owner executes ice_misc_intr() with PFINT_OICR_TSYN_TX flag set
5) ice_ptp_ts_irq() returns IRQ_WAKE_THREAD
7) The interrupt thread wakes up and kernel calls ice_misc_intr_thread_fn()
8) ice_ptp_process_ts() is called to handle any outstanding timestamps
9) ice_irq_dynamic_ena() is called to re-enable the OICR hardware interrupt
cause
10) ice_ptp_tx_tstamps_pending() is called to check if we missed any more
outstanding timestamps, checking both software and hardware indicators.
With this change, it should no longer be possible for new timestamps to
come in such a way that we lose an interrupt. If a timestamp comes in
before the ice_ptp_tx_tstamps_pending() call, it will be noticed by at
least one of the software bitmap check or the hardware bitmap check. If the
timestamp comes in *after* this check, it should cause a timestamp
interrupt as we have already read all timestamps from the PHY and the OICR
vector has been re-enabled.
Fixes: 7cab44f1c3 ("ice: Introduce ETH56G PHY model for E825C products")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Przemyslaw Korba <przemyslaw.korba@intel.com>
Tested-by: Vitaly Grinberg <vgrinber@redhat.com>
Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Modify PTP (Precision Time Protocol) configuration on link down flow.
Previously, PHY_REG_TX_OFFSET_READY register was cleared in such case.
This register is used to determine if the timestamp is valid or not on
the hardware side.
However, there is a possibility that there is still the packet in the
HW queue which originally was supposed to be timestamped but the link
is already down and given register is cleared.
This potentially might lead to the situation in which that 'delayed'
packet's timestamp is treated as invalid one when the link is up
again.
This in turn leads to the situation in which the driver is not able to
effectively clean timestamp memory and interrupt configuration.
From the hardware perspective, that 'old' interrupt was not handled
properly and even if new timestamp packets are processed, no new
interrupts is generated. As a result, providing timestamps to the user
applications (like ptp4l) is not possible.
The solution for this problem is implemented at the driver level rather
than the firmware, and maintains the tx_ready bit high, even during
link down events. This avoids entering a potential inconsistent state
between the driver and the timestamp hardware.
Testing hints:
- run PTP traffic at higher rate (like 16 PTP messages per second)
- observe ptp4l behaviour at the client side in the following
conditions:
a) trigger link toggle events. It needs to be physiscal
link down/up events
b) link speed change
In all above cases, PTP processing at ptp4l application should resume
always. In failure case, the following permanent error message in ptp4l
log was observed:
controller-0 ptp4l: err [6175.116] ptp4l-legacy timed out while polling
for tx timestamp
Fixes: 7cab44f1c3 ("ice: Introduce ETH56G PHY model for E825C products")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
In a previous commit, a bug was introduced where compact SSA summaries
failed to utilize the entire block space in non-4KB block size
configurations, leading to inefficient space management.
This patch fixes the calculation logic to ensure that compact SSA
summaries can fully occupy the block regardless of the block size.
Reported-by: Chris Mason <clm@meta.com>
Fixes: e48e16f3e3 ("f2fs: support non-4KB block size without packed_ssa feature")
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Compiling the NFSv4 module without any minorversion support doesn't make
much sense, so this patch sets NFS v4.1 as the default, always enabled
NFS version allowing us to replace all the CONFIG_NFS_V4_1s scattered
throughout the code with CONFIG_NFS_V4.
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
I introduce NFS4_MIN_MINOR_VERSION as a parallel to
NFS4_MAX_MINOR_VERSION to check if NFS v4.0 has been compiled in and
return an appropriate error if not.
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
At the same time, I move the NFS v4.0 functions into nfs40proc.c to keep
v4.0 features together in their own files.
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
No functional change in this patch. This just makes the next patch where
I introduce "sequence slot operations" simpler.
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
They don't need to be visible outside of nfs40proc.c anymore now that
the minor version ops have been moved over.
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
This is the first step in extracting NFS v4.0 into its own set of files
that can be disabled through Kconfig.
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
There are no entries left to ignore and none should be added again.
Remove the now unused logic.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
UAPI headers are not supposed to leak references to kconfig symbols.
These won't be set when building userspace. Hide the kconfig reference
behind 'if defined(__KERNEL__)', so it will be stripped by
headers_install.sh. The result for userspace will be the same, but the
exceptions in headers_install.sh can also be removed.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
UAPI headers are not supposed to leak references to kconfig symbols.
They are undefined there in any case. As all actual definitions of this
header are guarded behind a kconfig symbol, for userspace the header is
always identical to its asm-generic variant.
Make the custom UAPI header a kernel-internal one, so the leaks of
kconfig symbols are fixed and userspace will instead use
asm-generic/swab.h directly.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/lkml/93c55086-931a-4282-a94c-de4954047fa9@app.fastmail.com/
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The symbol PSR_ENDSTATE is pointless for userspace. Drop it from the
UAPI headers and instead inline it into the only two callers.
As as side-effect, remove a leak of an internal kconfig symbol through
the UAPI headers.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/lkml/d2ad12f2-3d65-4bef-890c-65d78a33d790@app.fastmail.com/
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Since commit 67a697e7576 ("ARC: retire ARC750 support") all supported
CPUs have the 'swape' instruction.
Always use the implementation of __arch_swabe() which uses 'swape'.
ARCH_USE_BUILTIN_BSWAP can not be used as that results on libcalls on
-mcpu=arc700.
As as side-effect, remove a leak of an internal kconfig symbol through
the UAPI headers.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/lkml/0ae2688a-5a22-405b-adaf-9b5ad712b245@app.fastmail.com/
Suggested-by: Vineet Gupta <vgupta@kernel.org>
Link: https://lore.kernel.org/lkml/a033a402-e3c5-4982-9fff-b6a4c55817ae@kernel.org/
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Agilex devkit supports a separate eMMC daughter card. The
eMMC daughter card replaces the SDMMC slot that is on the default
daughter card and thus requires a separate board dts file.
Signed-off-by: Ng Tze Yee <tzeyee.ng@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Add a appropriate kerneldoc to trace_event_buffer_reserve() to make it
easier to understand how that function is used.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20260130103745.1126e4af@gandalf.local.home
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
