Crafted EROFS images with metadata compression enabled can trigger
incorrect early returns, leading to folio reference leaks.
However, this does not cause system crashes or other severe issues.
Fixes: 414091322c ("erofs: implement metadata compression")
Cc: stable@kernel.org
Reviewed-by: Hongbo Li <lihongbo22@huawei.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
EROFS may allocate temporary pages using GFP_NOWAIT | GFP_NORETRY
when pcl->besteffort is off (e.g., for readahead requests).
If the allocation fails, the original request will fall back to
synchronous read, so the failure is transient.
Such fallback can frequently happen in low memory scenarios, but since
these failures are expected and temporary, avoid printing error
messages like below:
[ 7425.184264] erofs (device sr0): failed to decompress (lz4) -ENOMEM @ pa 148447232 size 28672 => 26788
[ 7426.244267] erofs (device sr0): failed to decompress (lz4) -ENOMEM @ pa 149422080 size 28672 => 15903
[ 7426.245508] erofs (device sr0): failed to decompress (lz4) -ENOMEM @ pa 138440704 size 28672 => 39294
...
[ 7504.258373] erofs (device sr0): failed to decompress (lz4) -ENOMEM @ pa 93581312 size 20480 => 47366
Fixes: 831faabed8 ("erofs: improve decompression error reporting")
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Just like what was done for other algorithms, let's propagate detailed
error reasons for LZ4 instead of just -EFSCORRUPTED to users:
"corrupted compressed data":
the compressed data is malformed or
destination buffer is not large enough
"unexpected end of stream":
the compressed stream ends normally, but without producing enough
decompressed data.
"compressed data start not found":
can be returned by z_erofs_fixup_insize().
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
When mounting the EROFS file system, it is necessary to check the
available compression algorithms. At this time, the for_each_set_bit
function can be used to simplify the code logic.
Signed-off-by: Yuwen Chen <ywen.chen@foxmail.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reduce the scope of 'z_erofs_crypto[]' that is not used outside of
'decompressor_crypto.c'.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202512102025.4mWeBSsf-lkp@intel.com/
Signed-off-by: Ferry Meng <mengferry@linux.alibaba.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
%pe will print a symbolic error name (e.g,. -ENOMEM), opposed to the
raw errno (e.g,. -12) produced by PTR_ERR().
Signed-off-by: Ferry Meng <mengferry@linux.alibaba.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Incorrectly transmitted interrupt number instead of queue number
when using netif_queue_set_napi. Besides, move this to appropriate
code location to set napi.
Remove redundant netif_stop_subqueue beacuase it is not part of the
hinic3_send_one_skb process.
Fixes: 17fcb3dc12 ("hinic3: module initialization and tx/rx logic")
Co-developed-by: Zhu Yikai <zhuyikai1@h-partners.com>
Signed-off-by: Zhu Yikai <zhuyikai1@h-partners.com>
Signed-off-by: Fan Gong <gongfan1@huawei.com>
Link: https://patch.msgid.link/7b8e4eb5c53cbd873ee9aaefeb3d9dbbaff52deb.1769070766.git.zhuyikai1@h-partners.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In at91_can_probe(), the dev structure is allocated via alloc_candev().
However, if the subsequent call to devm_phy_optional_get() fails, the
code jumps directly to exit_iounmap, missing the call to free_candev().
This results in a memory leak of the allocated net_device structure.
Fix this by jumping to the exit_free label instead, which ensures that
free_candev() is called to properly release the memory.
Compile tested only. Issue found using a prototype static analysis tool
and code review.
Fixes: 3ecc09856a ("can: at91_can: add CAN transceiver support")
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Link: https://patch.msgid.link/20260122114128.643752-1-zilin@seu.edu.cn
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
- various small fixes for ath10k/ath12k/mwifiex/rsi
- cfg80211 fix for HE bitrate overflow
- mac80211 fixes
- S1G beacon handling in scan
- skb tailroom handling for HW encryption
- CSA fix for multi-link
- handling of disabled links during association
-----BEGIN PGP SIGNATURE-----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=njuT
-----END PGP SIGNATURE-----
Merge tag 'wireless-2026-11-22' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Another set of updates:
- various small fixes for ath10k/ath12k/mwifiex/rsi
- cfg80211 fix for HE bitrate overflow
- mac80211 fixes
- S1G beacon handling in scan
- skb tailroom handling for HW encryption
- CSA fix for multi-link
- handling of disabled links during association
* tag 'wireless-2026-11-22' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: cfg80211: ignore link disabled flag from userspace
wifi: mac80211: apply advertised TTLM from association response
wifi: mac80211: parse all TTLM entries
wifi: mac80211: don't increment crypto_tx_tailroom_needed_cnt twice
wifi: mac80211: don't perform DA check on S1G beacon
wifi: ath12k: Fix wrong P2P device link id issue
wifi: ath12k: fix dead lock while flushing management frames
wifi: ath12k: Fix scan state stuck in ABORTING after cancel_remain_on_channel
wifi: ath12k: cancel scan only on active scan vdev
wifi: mwifiex: Fix a loop in mwifiex_update_ampdu_rxwinsize()
wifi: mac80211: correctly check if CSA is active
wifi: cfg80211: Fix bitrate calculation overflow for HE rates
wifi: rsi: Fix memory corruption due to not set vif driver data size
wifi: ath12k: don't force radio frequency check in freq_to_idx()
wifi: ath12k: fix dma_free_coherent() pointer
wifi: ath10k: fix dma_free_coherent() pointer
====================
Link: https://patch.msgid.link/20260122110248.15450-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Both nfs_local_do_read and nfs_local_do_write only return 0 at the
end, so switch them to returning void.
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Handling -EAGAIN in nfs_local_doio() was introduced with commit
0978e5b85f (nfs_do_local_{read,write} were made to have negative
checks for correspoding iter method) but commit e43e9a3a3d
since eliminated the possibility for this -EAGAIN early return.
So remove nfs_local_doio()'s -EAGAIN handling that calls
nfs_localio_disable_client() -- while it should never happen from
nfs_do_local_{read,write} this particular -EAGAIN handling is now
"dead" and so it has become a liability.
Fixes: e43e9a3a3d ("nfs/localio: refactor iocb initialization")
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
nfslocaliod_workqueue is a non-memreclaim workqueue (it isn't
initialized with WQ_MEM_RECLAIM), see commit b9f5dd57f4
("nfs/localio: use dedicated workqueues for filesystem read and
write").
Use nfslocaliod_workqueue for LOCALIO's SYNC work.
Also, set PF_LOCAL_THROTTLE | PF_MEMALLOC_NOIO in
nfs_local_fsync_work.
Fixes: b9f5dd57f4 ("nfs/localio: use dedicated workqueues for filesystem read and write")
Signed-off-by: Mike Snitzer <snitzer@hammerspace.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
LOCALIO is an NFS loopback mount optimization that avoids using the
network for READ, WRITE and COMMIT if the NFS client and server are
determined to be on the same system. But because LOCALIO is still
fundamentally "just NFS loopback mount" it is susceptible to recursion
deadlock via direct reclaim, e.g.: NFS LOCALIO down to XFS and then
back into NFS via nfs_writepages.
Fix LOCALIO's potential for direct reclaim deadlock by ensuring that
all its page cache allocations are done from GFP_NOFS context.
Thanks to Ben Coddington for pointing out commit ad22c7a043 ("xfs:
prevent stack overflows from page cache allocation").
Reported-by: John Cagle <john.cagle@hammerspace.com>
Tested-by: Allen Lu <allen.lu@hammerspace.com>
Suggested-by: Benjamin Coddington <bcodding@hammerspace.com>
Fixes: 70ba381e1a ("nfs: add LOCALIO support")
Signed-off-by: Mike Snitzer <snitzer@hammerspace.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
The current code for handling short writes in localio just truncates the
I/O and then sets an error. While that is close to how the ordinary NFS
code behaves, it does mean there is a chance the data that got written
is lost because it isn't persisted.
To fix this, change localio so that the upper layers can direct the
behaviour to persist any unstable data by rewriting it, and then
continuing writing until an ENOSPC is hit.
Fixes: 70ba381e1a ("nfs: add LOCALIO support")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Reviewed-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
The divider_round_rate() function is now deprecated, so let's migrate
to divider_determine_rate() instead so that this deprecated API can be
removed.
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Brian Masney <bmasney@redhat.com>
The divider_round_rate() function is now deprecated, so let's migrate
to divider_determine_rate() instead so that this deprecated API can be
removed.
Note that when the main function itself was migrated to use
determine_rate, this was mistakenly converted to:
req->rate = divider_round_rate(...)
This is invalid in the case when an error occurs since it can set the
rate to a negative value.
Fixes: 0f9cf96a01 ("clk: zynqmp: divider: convert from round_rate() to determine_rate()")
Signed-off-by: Brian Masney <bmasney@redhat.com>
The divider_round_rate() function is now deprecated, so let's migrate
to divider_determine_rate() instead so that this deprecated API can be
removed.
Note that when the main function itself was migrated to use
determine_rate, this was mistakenly converted to:
req->rate = divider_round_rate(...)
This is invalid in the case when an error occurs since it can set the
rate to a negative value.
Fixes: f7a6bed91a ("clk: x86: cgu: convert from round_rate() to determine_rate()")
Signed-off-by: Brian Masney <bmasney@redhat.com>
The divider_round_rate() function is now deprecated, so let's migrate
to divider_determine_rate() instead so that this deprecated API can be
removed.
Note that when the main function itself was migrated to use
determine_rate, this was mistakenly converted to:
req->rate = divider_round_rate(...)
This is invalid in the case when an error occurs since it can set the
rate to a negative value.
Fixes: 9e3372b2eb ("clk: versaclock3: convert from round_rate() to determine_rate()")
Signed-off-by: Brian Masney <bmasney@redhat.com>
The divider_round_rate_parent() function is now deprecated, so let's
migrate to divider_determine_rate() instead so that this deprecated API
can be removed.
Note that when the main function itself was migrated to use
determine_rate, this was mistakenly converted to:
req->rate = divider_round_rate(...)
This is invalid in the case when an error occurs since it can set the
rate to a negative value.
Fixes: cd1cb38836 ("clk: stm32: stm32-core: convert from round_rate() to determine_rate()")
Signed-off-by: Brian Masney <bmasney@redhat.com>
The divider_ro_round_rate() function is now deprecated, so let's migrate
to divider_ro_determine_rate() instead so that this deprecated API can
be removed.
Note that when the main function itself was migrated to use
determine_rate, this was mistakenly converted to:
req->rate = divider_round_rate(...)
This is invalid in the case when an error occurs since it can set the
rate to a negative value.
Fixes: cd1cb38836 ("clk: stm32: stm32-core: convert from round_rate() to determine_rate()")
Signed-off-by: Brian Masney <bmasney@redhat.com>
The divider_round_rate() function is now deprecated, so let's migrate
to divider_determine_rate() instead so that this deprecated API can be
removed.
Note that when the main function itself was migrated to use
determine_rate, this was mistakenly converted to:
req->rate = divider_round_rate(...)
This is invalid in the case when an error occurs since it can set the
rate to a negative value.
Fixes: deb4740a5f ("clk: sprd: div: convert from round_rate() to determine_rate()")
Signed-off-by: Brian Masney <bmasney@redhat.com>
The divider_round_rate() function is now deprecated, so let's migrate
to divider_determine_rate() instead so that this deprecated API can be
removed.
Note that when the main function itself was migrated to use
determine_rate, this was mistakenly converted to:
req->rate = divider_round_rate(...)
This is invalid in the case when an error occurs since it can set the
rate to a negative value.
Note that this commit also removes a debugging message that's not really
needed.
Fixes: 9a3b699361 ("clk: sophgo: sg2042-clkgen: convert from round_rate() to determine_rate()")
Tested-by: Chen Wang <unicorn_wang@outlook.com>
Reviewed-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Brian Masney <bmasney@redhat.com>
The divider_round_rate() function is now deprecated, so let's migrate
to divider_determine_rate() instead so that this deprecated API can be
removed.
Note that when the main function itself was migrated to use
determine_rate, this was mistakenly converted to:
req->rate = divider_round_rate(...)
This is invalid in the case when an error occurs since it can set the
rate to a negative value.
Fixes: 0879768df2 ("clk: nxp: lpc32xx: convert from round_rate() to determine_rate()")
Tested-by: Vladimir Zapolskiy <vz@mleia.com>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Brian Masney <bmasney@redhat.com>
The divider_round_rate() function is now deprecated, so let's migrate
to divider_determine_rate() instead so that this deprecated API can be
removed.
Note that when the main function itself was migrated to use
determine_rate, this was mistakenly converted to:
req->rate = divider_round_rate(...)
This is invalid in the case when an error occurs since it can set the
rate to a negative value.
Fixes: 215f8aa095 ("clk: nuvoton: ma35d1-divider: convert from round_rate() to determine_rate()")
Signed-off-by: Brian Masney <bmasney@redhat.com>
The divider_round_rate() function is now deprecated, so let's migrate
to divider_determine_rate() instead so that this deprecated API can be
removed.
Note that when the main function itself was migrated to use
determine_rate, this was mistakenly converted to:
req->rate = divider_round_rate(...)
This is invalid in the case when an error occurs since it can set the
rate to a negative value.
Fixes: 7b45988fcf ("clk: milbeaut: convert from round_rate() to determine_rate()")
Signed-off-by: Brian Masney <bmasney@redhat.com>
The divider_ro_round_rate() function is now deprecated, so let's migrate
to divider_ro_determine_rate() instead so that this deprecated API can
be removed.
Note that when the main function itself was migrated to use
determine_rate, this was mistakenly converted to:
req->rate = divider_round_rate(...)
This is invalid in the case when an error occurs since it can set the
rate to a negative value.
Fixes: fe67c682f91c ("clk: milbeaut: convert from divider_round_rate() to divider_determine_rate()")
Signed-off-by: Brian Masney <bmasney@redhat.com>
The divider_round_rate() function is now deprecated, so let's migrate
to divider_determine_rate() instead so that this deprecated API can be
removed.
Note that when the main function itself was migrated to use
determine_rate, this was mistakenly converted to:
req->rate = divider_round_rate(...)
This is invalid in the case when an error occurs since it can set the
rate to a negative value.
Fixes: bb40a2ef4f ("clk: loongson1: convert from round_rate() to determine_rate()")
Reviewed-by: Keguang Zhang <keguang.zhang@gmail.com>
Tested-by: Keguang Zhang <keguang.zhang@gmail.com> # on LS1B & LS1C
Signed-off-by: Brian Masney <bmasney@redhat.com>
The divider_round_rate() function is now deprecated, so let's migrate
to divider_determine_rate() instead so that this deprecated API can be
removed.
Note that when the main function itself was migrated to use
determine_rate, this was mistakenly converted to:
req->rate = divider_round_rate(...)
This is invalid in the case when an error occurs since it can set the
rate to a negative value.
Fixes: 619a6210f3 ("clk: hisilicon: clkdivider-hi6220: convert from round_rate() to determine_rate()")
Signed-off-by: Brian Masney <bmasney@redhat.com>
The divider_round_rate() function is now deprecated, so let's migrate
to divider_determine_rate() instead so that this deprecated API can be
removed.
Note that when the main function itself was migrated to use
determine_rate, this was mistakenly converted to:
req->rate = divider_round_rate(...)
This is invalid in the case when an error occurs since it can set the
rate to a negative value.
Fixes: 64613d7fb4 ("clk: bm1880: convert from round_rate() to determine_rate()")
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Brian Masney <bmasney@redhat.com>
The divider_ro_round_rate() function is now deprecated, so let's migrate
to divider_ro_determine_rate() instead so that this deprecated API can
be removed.
Note that when the main function itself was migrated to use
determine_rate, this was mistakenly converted to:
req->rate = divider_round_rate(...)
This is invalid in the case when an error occurs since it can set the
rate to a negative value.
Fixes: cf1d95fa0c64 ("clk: bm1880: convert from divider_round_rate() to divider_determine_rate()")
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Brian Masney <bmasney@redhat.com>
The divider_round_rate() function is now deprecated, so let's migrate
to divider_determine_rate() instead so that this deprecated API can be
removed. Additionally, owl_divider_helper_round_rate() is no longer used,
so let's drop that from the header file as well.
Note that when the main function itself was migrated to use
determine_rate, this was mistakenly converted to:
req->rate = divider_round_rate(...)
This is invalid in the case when an error occurs since it can set the
rate to a negative value.
Fixes: 1b04e12a8b ("clk: actions: owl-divider: convert from round_rate() to determine_rate()")
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Brian Masney <bmasney@redhat.com>
owl_divider_helper_round_rate() is just a wrapper for
divider_round_rate(), which is deprecated. Let's migrate to
divider_determine_rate() instead so that this deprecated API can be
removed.
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Brian Masney <bmasney@redhat.com>
The divider_round_rate_parent() function is now deprecated, so let's
migrate to divider_determine_rate() instead so that this deprecated API
can be removed. Also go ahead and convert all of the driver from round
rate type to determine rate that accepts a 'struct clk_rate_request' to
simplify the overall driver code.
Acked-by: Chen-Yu Tsai <wens@kernel.org>
Signed-off-by: Brian Masney <bmasney@redhat.com>
The divider_round_rate() function is now deprecated, so let's migrate
to divider_determine_rate() instead so that this deprecated API can be
removed. Also go ahead and convert all of the driver from round rate
type to determine rate that accepts a 'struct clk_rate_request' to
simplify the overall driver code.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Document 'perf sched stats' purpose, usage examples and guide on how to
interpret the report data in the perf-sched man page.
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anubhav Shelat <ashelat@redhat.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: David Vernet <void@manifault.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Gautham Shenoy <gautham.shenoy@amd.com>
Cc: Graham Woodward <graham.woodward@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Yujie Liu <yujie.liu@intel.com>
Cc: Zhongqiu Han <quic_zhonhan@quicinc.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The live mode works similar to simple `perf stat` command, by profiling
the target and printing results on the terminal as soon as the target
finishes.
Example usage:
# perf sched stats -- true
Description
----------------------------------------------------------------------------------------------------
DESC -> Description of the field
COUNT -> Value of the field
PCT_CHANGE -> Percent change with corresponding base value
AVG_JIFFIES -> Avg time in jiffies between two consecutive occurrence of event
----------------------------------------------------------------------------------------------------
Time elapsed (in jiffies) : 1
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY>
----------------------------------------------------------------------------------------------------
DESC COUNT PCT_CHANGE
----------------------------------------------------------------------------------------------------
yld_count : 0
array_exp : 0
sched_count : 0
sched_goidle : 0 ( 0.00% )
ttwu_count : 0
ttwu_local : 0 ( 0.00% )
rq_cpu_time : 27875
run_delay : 0 ( 0.00% )
pcount : 0
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY> | DOMAIN: SMT
----------------------------------------------------------------------------------------------------
DESC COUNT AVG_JIFFIES
----------------------------------------- <Category busy> ------------------------------------------
busy_lb_count : 0 $ 0.00 $
busy_lb_balanced : 0 $ 0.00 $
busy_lb_failed : 0 $ 0.00 $
busy_lb_imbalance_load : 0
busy_lb_imbalance_util : 0
busy_lb_imbalance_task : 0
busy_lb_imbalance_misfit : 0
busy_lb_gained : 0
busy_lb_hot_gained : 0
busy_lb_nobusyq : 0 $ 0.00 $
busy_lb_nobusyg : 0 $ 0.00 $
*busy_lb_success_count : 0
*busy_lb_avg_pulled : 0.00
... and so on. Output will show similar data for all the cpus in the
system.
Co-developed-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Tested-by: James Clark <james.clark@linaro.org>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anubhav Shelat <ashelat@redhat.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: David Vernet <void@manifault.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Gautham Shenoy <gautham.shenoy@amd.com>
Cc: Graham Woodward <graham.woodward@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Yujie Liu <yujie.liu@intel.com>
Cc: Zhongqiu Han <quic_zhonhan@quicinc.com>
[ Avoid potentially using 'sv' uninitialized by calling free_cpu_domain_info() only when build_cpu_domain_map() is called ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
`perf sched stats record` captures two sets of samples. For workload
profile, first set right before workload starts and second set after
workload finishes. For the systemwide profile, first set at the
beginning of profile and second set on receiving SIGINT signal.
Add `perf sched stats report` subcommand that will read both the set
of samples, get the diff and render a final report. Final report prints
scheduler stat at cpu granularity as well as sched domain granularity.
Example usage:
# ./perf sched stats record -- true
[ perf sched stats: Wrote samples to perf.data ]
# perf sched stats report
Description
----------------------------------------------------------------------------------------------------
DESC -> Description of the field
COUNT -> Value of the field
PCT_CHANGE -> Percent change with corresponding base value
AVG_JIFFIES -> Avg time in jiffies between two consecutive occurrence of event
----------------------------------------------------------------------------------------------------
Time elapsed (in jiffies) : 1
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY>
----------------------------------------------------------------------------------------------------
DESC COUNT PCT_CHANGE
----------------------------------------------------------------------------------------------------
yld_count : 0
array_exp : 0
sched_count : 0
sched_goidle : 0 ( 0.00% )
ttwu_count : 0
ttwu_local : 0 ( 0.00% )
rq_cpu_time : 33525
run_delay : 436 ( 1.30% )
pcount : 0
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY> | DOMAIN: SMT
----------------------------------------------------------------------------------------------------
DESC COUNT AVG_JIFFIES
----------------------------------------- <Category busy> ------------------------------------------
busy_lb_count : 0 $ 0.00 $
busy_lb_balanced : 0 $ 0.00 $
busy_lb_failed : 0 $ 0.00 $
busy_lb_imbalance_load : 0
busy_lb_imbalance_util : 0
busy_lb_imbalance_task : 0
busy_lb_imbalance_misfit : 0
busy_lb_gained : 0
busy_lb_hot_gained : 0
busy_lb_nobusyq : 0 $ 0.00 $
busy_lb_nobusyg : 0 $ 0.00 $
*busy_lb_success_count : 0
*busy_lb_avg_pulled : 0.00
... and so on. Output shows similar data for all the cpus in the
system.
Co-developed-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Tested-by: James Clark <james.clark@linaro.org>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anubhav Shelat <ashelat@redhat.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: David Vernet <void@manifault.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Gautham Shenoy <gautham.shenoy@amd.com>
Cc: Graham Woodward <graham.woodward@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Yujie Liu <yujie.liu@intel.com>
Cc: Zhongqiu Han <quic_zhonhan@quicinc.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The /proc/schedstat file output is standardized with version number.
Add support to record and raw dump v17 version layout.
Version 17 of schedstats removed 'lb_imbalance' field as it has no
significance anymore and instead added more relevant fields namely
'lb_imbalance_load', 'lb_imbalance_util', 'lb_imbalance_task' and
'lb_imbalance_misfit'.
The domain field prints the name of the corresponding sched domain from
this version onwards.
Co-developed-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anubhav Shelat <ashelat@redhat.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: David Vernet <void@manifault.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Gautham Shenoy <gautham.shenoy@amd.com>
Cc: Graham Woodward <graham.woodward@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Yujie Liu <yujie.liu@intel.com>
Cc: Zhongqiu Han <quic_zhonhan@quicinc.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The /proc/schedstat file output is standardized with version number.
Add support to record and raw dump v16 version layout.
Version 16 of schedstats changed the order of definitions within 'enum
cpu_idle_type', which changed the order of [CPU_MAX_IDLE_TYPES] columns
in show_schedstat().
In particular the position of CPU_IDLE and __CPU_NOT_IDLE changed
places.
Co-developed-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Tested-by: James Clark <james.clark@linaro.org>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anubhav Shelat <ashelat@redhat.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: David Vernet <void@manifault.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Gautham Shenoy <gautham.shenoy@amd.com>
Cc: Graham Woodward <graham.woodward@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Yujie Liu <yujie.liu@intel.com>
Cc: Zhongqiu Han <quic_zhonhan@quicinc.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Define new, perf tool only, sample types and their layouts. Add logic
to parse /proc/schedstat, convert it to perf sample format and save
samples to perf.data file with `perf sched stats record` command.
Also add logic to read perf.data file, interpret schedstat samples and
print rawdump of samples with `perf script -D`.
Note that, /proc/schedstat file output is standardized with version
number. The patch supports v15 but older or newer version can be added
easily.
Co-developed-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Tested-by: James Clark <james.clark@linaro.org>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anubhav Shelat <ashelat@redhat.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: David Vernet <void@manifault.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Gautham Shenoy <gautham.shenoy@amd.com>
Cc: Graham Woodward <graham.woodward@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Yujie Liu <yujie.liu@intel.com>
Cc: Zhongqiu Han <quic_zhonhan@quicinc.com>
[ PRIu64 needs uint64_t, not 'unsigned long' to work on both 32-bit and 64-bit ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add device tree support to the CMDQV driver to enable usage on Tegra264
SoCs. The implementation parses the nvidia,cmdqv phandle from the SMMU
device tree node to associate each SMMU with its corresponding CMDQV
instance based on compatible string.
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Ashish Mhetre <amhetre@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Will Deacon <will@kernel.org>
A platform device is created by acpi_create_platform_device() per CMDQV's
adev. That means there is no point in going through _CRS of ACPI.
Replace all the ACPI functions with standard platform functions. And drop
all ACPI dependencies. This will make the driver compatible with DT also.
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Will Deacon <will@kernel.org>
Stefano Garzarella says:
====================
vsock/virtio: fix TX credit handling
The original series was posted by Melbin K Mathew <mlbnkm1@gmail.com> till v4.
Since it's a real issue and the original author seems busy, I'm sending
the new version fixing my comments but keeping the authorship (and restoring
mine on patch 2 as reported on v4).
v5: https://lore.kernel.org/netdev/20260116201517.273302-1-sgarzare@redhat.com/
v4: https://lore.kernel.org/netdev/20251217181206.3681159-1-mlbnkm1@gmail.com/
From Melbin K Mathew <mlbnkm1@gmail.com>:
This series fixes TX credit handling in virtio-vsock:
Patch 1: Fix potential underflow in get_credit() using s64 arithmetic
Patch 2: Fix vsock_test seqpacket bounds test
Patch 3: Cap TX credit to local buffer size (security hardening)
Patch 4: Add stream TX credit bounds regression test
The core issue is that a malicious guest can advertise a huge buffer
size via SO_VM_SOCKETS_BUFFER_SIZE, causing the host to allocate
excessive sk_buff memory when sending data to that guest.
On an unpatched Ubuntu 22.04 host (~64 GiB RAM), running a PoC with
32 guest vsock connections advertising 2 GiB each and reading slowly
drove Slab/SUnreclaim from ~0.5 GiB to ~57 GiB; the system only
recovered after killing the QEMU process.
With this series applied, the same PoC shows only ~35 MiB increase in
Slab/SUnreclaim, no host OOM, and the guest remains responsive.
====================
Link: https://patch.msgid.link/20260121093628.9941-1-sgarzare@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add a regression test for the TX credit bounds fix. The test verifies
that a sender with a small local buffer size cannot queue excessive
data even when the peer advertises a large receive buffer.
The client:
- Sets a small buffer size (64 KiB)
- Connects to server (which advertises 2 MiB buffer)
- Sends in non-blocking mode until EAGAIN
- Verifies total queued data is bounded
This guards against the original vulnerability where a remote peer
could cause unbounded kernel memory allocation by advertising a large
buffer and reading slowly.
Suggested-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Melbin K Mathew <mlbnkm1@gmail.com>
[Stefano: use sock_buf_size to check the bytes sent + small fixes]
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20260121093628.9941-5-sgarzare@redhat.com
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The virtio transports derives its TX credit directly from peer_buf_alloc,
which is set from the remote endpoint's SO_VM_SOCKETS_BUFFER_SIZE value.
On the host side this means that the amount of data we are willing to
queue for a connection is scaled by a guest-chosen buffer size, rather
than the host's own vsock configuration. A malicious guest can advertise
a large buffer and read slowly, causing the host to allocate a
correspondingly large amount of sk_buff memory.
The same thing would happen in the guest with a malicious host, since
virtio transports share the same code base.
Introduce a small helper, virtio_transport_tx_buf_size(), that
returns min(peer_buf_alloc, buf_alloc), and use it wherever we consume
peer_buf_alloc.
This ensures the effective TX window is bounded by both the peer's
advertised buffer and our own buf_alloc (already clamped to
buffer_max_size via SO_VM_SOCKETS_BUFFER_MAX_SIZE), so a remote peer
cannot force the other to queue more data than allowed by its own
vsock settings.
On an unpatched Ubuntu 22.04 host (~64 GiB RAM), running a PoC with
32 guest vsock connections advertising 2 GiB each and reading slowly
drove Slab/SUnreclaim from ~0.5 GiB to ~57 GiB; the system only
recovered after killing the QEMU process. That said, if QEMU memory is
limited with cgroups, the maximum memory used will be limited.
With this patch applied:
Before:
MemFree: ~61.6 GiB
Slab: ~142 MiB
SUnreclaim: ~117 MiB
After 32 high-credit connections:
MemFree: ~61.5 GiB
Slab: ~178 MiB
SUnreclaim: ~152 MiB
Only ~35 MiB increase in Slab/SUnreclaim, no host OOM, and the guest
remains responsive.
Compatibility with non-virtio transports:
- VMCI uses the AF_VSOCK buffer knobs to size its queue pairs per
socket based on the local vsk->buffer_* values; the remote side
cannot enlarge those queues beyond what the local endpoint
configured.
- Hyper-V's vsock transport uses fixed-size VMBus ring buffers and
an MTU bound; there is no peer-controlled credit field comparable
to peer_buf_alloc, and the remote endpoint cannot drive in-flight
kernel memory above those ring sizes.
- The loopback path reuses virtio_transport_common.c, so it
naturally follows the same semantics as the virtio transport.
This change is limited to virtio_transport_common.c and thus affects
virtio-vsock, vhost-vsock, and loopback, bringing them in line with the
"remote window intersected with local policy" behaviour that VMCI and
Hyper-V already effectively have.
Fixes: 06a8fc7836 ("VSOCK: Introduce virtio_vsock_common.ko")
Suggested-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Melbin K Mathew <mlbnkm1@gmail.com>
[Stefano: small adjustments after changing the previous patch]
[Stefano: tweak the commit message]
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Luigi Leonardi <leonardi@redhat.com>
Link: https://patch.msgid.link/20260121093628.9941-4-sgarzare@redhat.com
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The test requires the sender (client) to send all messages before waking
up the receiver (server).
Since virtio-vsock had a bug and did not respect the size of the TX
buffer, this test worked, but now that we are going to fix the bug, the
test hangs because the sender would fill the TX buffer before waking up
the receiver.
Set the buffer size in the sender (client) as well, as we already do for
the receiver (server).
Fixes: 5c338112e4 ("test/vsock: rework message bounds test")
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20260121093628.9941-3-sgarzare@redhat.com
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
