These values should be taken from SIG-A, indicating how SIG-B
is encoded. The values taken from SIG-B (the corresponding
register) indicate how the data portion (for that user) is
encoded. For the SIG-B compression value the correct mask was
applied to the wrong value.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20251110150012.4d625e05dece.If295eb9382fc681d63b0853261d884cd1a833ba5@changeid
Add the necessary data definitions for the sniffer-related fields
reported for the various UHR frame formats by the firmware/hardware
to be able to later add the necessary sniffer code.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20251110150012.358b51dd8cb2.I16178416dd7019cb88a45e55f81eb28510982028@changeid
Fix unsafe power type mapping for iwl_txpower_constraints_cmd
that breaks if enum values change. Replace "power_type - 1" with
explicit case handling for each power type.
While on it, Add debug logging to show configured power type.
Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20251110150012.f3b15566dac8.I31b900ab161fb627158dc1b3e2fc4ab35d84fddf@changeid
If the firmware were to report three LMACs (which doesn't
exist in hardware) then using "fwrt->smem_cfg.lmac[2]" is
an overrun of the array. Reject such and use IWL_FW_CHECK
instead of WARN_ON in this function.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20251110150012.16e8c2d70c26.Iadfcc1aedf43c5175b3f0757bea5aa232454f1ac@changeid
In version 6, a phy id is added to the tlc command and the sta_id
becomes a sta_mask.
This change is required for NAN:
- in NAN we can have 2 logical stations of the same physical
station and with the same channel/band (2 NDIs with the same peer) -
hence the sta_mask.
- In NAN we can have more than one TLC configuration for a single
station (for example if it operates on more than one channel) - so the
FW needs to be able to find the right TLC context, based on the phy id.
Populate the new version (for now with a single station id only. The
other ones will be added later when NAN is implemented).
In case the FW has a lower version than that - convert it to the FW
version.
Note that there is some code duplicantion in the conversions to v5
and to v4, but this is intentional since v5 will be removed as soon as
v6 is supported.
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20251110150012.64220c6b292b.I2f5d195ce2bf9d35398f0f6f2d5faf9e90ae45a4@changeid
The firmware can request us to trigger a dump upon specific
notifications. In order for that flow to work, we need to call the
firmware debug infra when we get a notification from the firmware.
This was missing.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20251110150012.d6d7e69c7da6.I40f891ece6f98983e0fd2cd0c6863f8620ca08aa@changeid
Fix the documentation comment for the ap_type field
in AP_TX_POWER_CONSTRAINTS_CMD to reference the correct
enum iwl_6ghz_ap_type.
Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20251110150012.d70f56dd24b0.I82956bd93a36c7fa5585f014c197afea0610a076@changeid
- iwl_mvm_scan_umac_chan_flags_v2() computes channel params flags
that are only relevant for 2.4/5 GHz scan, explicitly clear
the flags for 6 GHz scan.
- n_aps_override[0] and n_aps_override[1] are not relevant for
6 GHz scan, remove them.
Signed-off-by: Daniel Gabay <daniel.gabay@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20251110150012.3b4f8ed30498.I014c098e64118fe3adaf6db07816e7df8ea4f79e@changeid
Erroneously, the channel flags in the scan command for 6 GHz scan
were mistakenly set using iwl_mld_scan_get_cmd_gen_flags, which
actually calculates a different field (the general flags) in the
command.
However, these flags are not relevant for 6 GHz scan part, except for
IWL_SCAN_CHANNEL_FLAG_6G_PSC_NO_FILTER, which is already set
correctly. Since the incorrect flags are only applied in the
6 GHz scan part and are ignored by the firmware, this has no
adverse effect. Therefore, we can simply remove this helper
function call and explicitly clear the flags.
Signed-off-by: Daniel Gabay <daniel.gabay@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20251110150012.a8a931e1abef.I8f7dc66b23198b83083685ef76dec59cfb407f57@changeid
While this is not needed for configuring Rx filters, without setting
it some multicast action frame registrations from user space would
fail, specifically, NAN multicast action frame registration (SDFs).
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20251110180612.640fb5a99470.If6f423bcf0a426e662041a4b310ce81485f1af03@changeid
- Add firmware API definitions related to NAN.
- Indicate support for NAN Device interface operation, if supported
by the firmware.
- Add support for starting and stopping NAN cluster functionality.
The NAN cluster operation is offloaded to the FW, which notifies
the driver on:
- cluster events: Start/Join cluster.
- Discovery Window (DW) end, which allows the driver to flush the
HW queues and update the higher layers
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20251110180612.76dd4d45b91e.I5abfab64b4f27bed442aeca6231ffebad979cad6@changeid
Add the new mssio driver and bindings to the existing entry
for Microchip RISC-V devices.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
On Polarfire SoC, the Bank 2 and Bank 4 IOs connected to the
Multiprocessor Subsystem (MSS) are controlled by IOMUX_CRs 1 through 6,
which determine what function in routed to them, and
MSSIO_BANK#_IO_CFG_CRs, which determine the configuration of each pin.
Add a driver for this pin controller, including several custom
properties that reflect aspects of the MSS's configuration.
Reuse the Kconfig option for iomux0, since controlling MSSIOs without
iomux0 routing a function to the MSSIOs in question is pointless, and
routing a function to the MSSIOs is equally unhelpful if none of them
are configured to make use of that function.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
On Polarfire SoC, the Bank 2 and Bank 4 IOs connected to the
Multiprocessor Subsystem (MSS) are controlled by IOMUX_CRs 1 through 6,
which determine what function in routed to them, and
MSSIO_BANK#_IO_CFG_CRs, which determine the configuration of each pin.
Document it, including several custom configuration options that stem
from MSS Configurator options (the MSS Configurator is part of the FPGA
tooling for this device). "ibufmd" unfortunately is not a 1:1 mapping
with an MSS Configurator option, unlike clamp-diode or lockdown, and I
do not know the effect of any bits in the field. I have no been able to
find an explanation for these bits in documentation.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Add a generic function to allow creation of groups and functions at
runtime based on devicetree content, before setting up mux mappings.
It works similarly to pinconf_generic_dt_node_to_map(), and
therefore parses pinconf properties and maps those too, allowing it
to be used as the dt_node_to_map member of the pinctrl_ops struct.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
There's three of these drivers now for the same platforms, move them
together with other microchip drivers to follow.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Mahua TLMM block is identical to Glymur, but the PDC wake IRQ map
differs since PDC handles the interrupt for GPIO 155 instead of GPIO 143
as seen on Glymur. Hence add the Mahua-specific PDC map to the Glymur
TLMM driver.
Signed-off-by: Gopikrishna Garmidi <gopikrishna.garmidi@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Document the pinctrl compatible for the Mahua SoC, a 12-core variant
of Glymur. The PDC wake IRQ map differs since PDC handles the interrupt
for GPIO 155 instead of GPIO 143 as seen on Glymur.
Signed-off-by: Gopikrishna Garmidi <gopikrishna.garmidi@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
The memalloc_nofs_save() and memalloc_nofs_restore() calls are
incorrectly paired in xfs_trans_roll.
Call path:
xfs_trans_alloc()
__xfs_trans_alloc()
// tp->t_pflags = memalloc_nofs_save();
xfs_trans_set_context()
...
xfs_defer_trans_roll()
xfs_trans_roll()
xfs_trans_dup()
// old_tp->t_pflags = 0;
xfs_trans_switch_context()
__xfs_trans_commit()
xfs_trans_free()
// memalloc_nofs_restore(tp->t_pflags);
xfs_trans_clear_context()
The code passes 0 to memalloc_nofs_restore() when committing the original
transaction, but memalloc_nofs_restore() should always receive the
flags returned from the paired memalloc_nofs_save() call.
Before commit 3f6d5e6a46 ("mm: introduce memalloc_flags_{save,restore}"),
calling memalloc_nofs_restore(0) would unset the PF_MEMALLOC_NOFS flag,
which could cause memory allocation deadlocks[1].
Fortunately, after that commit, memalloc_nofs_restore(0) does nothing,
so this issue is currently harmless.
Fixes: 756b1c3433 ("xfs: use current->journal_info for detecting transaction recursion")
Link: https://lore.kernel.org/linux-xfs/20251104131857.1587584-1-leo.lilong@huawei.com [1]
Signed-off-by: Wenwu Hou <hwenwur@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Zones in the beginning of the address space are typically mapped to
higer bandwidth tracks on HDDs than those at the end of the address
space. So, in stead of allocating zones "round robin" across the whole
address space, always allocate the zone with the lowest index.
This increases average write bandwidth for overwrite workloads
when less than the full capacity is being used. At ~50% utilization
this improves bandwidth for a random file overwrite benchmark
with 128MiB files and 256MiB zone capacity by 30%.
Running the same benchmark with small 2-8 MiB files at 67% capacity
shows no significant difference in performance. Due to heavy
fragmentation the whole zone range is in use, greatly limiting the
number of free zones with high bw.
Signed-off-by: Hans Holmberg <hans.holmberg@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Large block support was merged upstream in 6.12 (Dec 2024) and metadata
directories was merged in 6.13 (Jan 2025). We've not received any
serious complaints about the ondisk formats of these two features in the
past year, so let's remove the experimental warnings.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Unwind the callback based programming model by querying the cached
zone information using blkdev_get_zone_info.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Any used block must have been written, this reject used blocks > write
pointer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Currently xfs_zone_validate mixes validating the software zone state in
the XFS realtime group with validating the hardware state reported in
struct blk_zone and deriving the write pointer from that.
Move all code that works on the realtime group to xfs_init_zone, and only
keep the hardware state validation in xfs_zone_validate. This makes the
code more clear, and allows for better reuse in userspace.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Move the two methods to query the write pointer out of xfs_init_zone into
the callers, so that xfs_init_zone doesn't have to bother with the
blk_zone structure and instead operates purely at the XFS realtime group
level.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Add a helper to figure the on-disk size of a group, accounting for the
XFS_SB_FEAT_INCOMPAT_ZONE_GAPS feature if needed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Add the missing forward declaration for struct blk_zone in xfs_zones.h.
This avoids headaches with the order of header file inclusion to avoid
compilation errors.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
The calling convention of xfs_attr_leaf_hasname() is problematic, because
it returns a NULL buffer when xfs_attr3_leaf_read fails, a valid buffer
when xfs_attr3_leaf_lookup_int returns -ENOATTR or -EEXIST, and a
non-NULL buffer pointer for an already released buffer when
xfs_attr3_leaf_lookup_int fails with other error values.
Fix this by simply open coding xfs_attr_leaf_hasname in the callers, so
that the buffer release code is done by each caller of
xfs_attr3_leaf_read.
Cc: stable@vger.kernel.org # v5.19+
Fixes: 07120f1abd ("xfs: Add xfs_has_attr and subroutines")
Reported-by: Mark Tinguely <mark.tinguely@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
I learned a few things this year: first, blk_status_to_errno can return
ENODATA for critical media errors; and second, the scrub code doesn't
mark data structures as corrupt on ENODATA or EIO.
Currently, scrub failing to capture these errors isn't all that
impactful -- the checking code will exit to userspace with EIO/ENODATA,
and xfs_scrub will log a complaint and exit with nonzero status. Most
people treat fsck tools failing as a sign that the fs is corrupt, but
online fsck should mark the metadata bad and keep moving.
Cc: stable@vger.kernel.org # v4.15
Fixes: 4700d22980 ("xfs: create helpers to record and deal with scrub problems")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
The double buffering where just one scratch area is used at a time does
not efficiently use the available memory. It was originally implemented
when GC I/O could happen out of order, but that was removed before
upstream submission to avoid fragmentation. Now that all GC I/Os are
processed in order, just use a number of buffers as a simple ring buffer.
For a synthetic benchmark that fills 256MiB HDD zones and punches out
holes to free half the space this leads to a decrease of GC time by
a little more than 25%.
Thanks to Hans Holmberg <hans.holmberg@wdc.com> for testing and
benchmarking.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hans Holmberg <hans.holmberg@wdc.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Replace our somewhat fragile code to reuse the bio, which caused a
regression in the past with the block layer bio_reuse helper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hans Holmberg <hans.holmberg@wdc.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Add a helper to allow an existing bio to be resubmitted without
having to re-add the payload.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Hans Holmberg <hans.holmberg@wdc.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
The xfs.h header conflicts with the public xfs.h in xfsprogs, leading
to a spurious difference in all shared libxfs files that have to
include libxfs_priv.h in userspace. Directly include xfs_platform.h so
that we can add a header of the same name to xfsprogs and remove this
major annoyance for the shared code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Move the global defines from xfs.h to xfs_platform.h to prepare for
removing xfs.h.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Ensure we have all kernel headers included by the time we do our own
thing, just like the rest of the tree.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Rename xfs_linux.h to prepare for including including it directly
from source files including those shared with xfsprogs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Add a new xlog_write_space_advance that returns the current place in the
iclog that data is written to, and advances the various counters by the
amount taken from xlog_write_iovec, and also use it xlog_write_partial,
which open codes the counter adjustments, but misses the asserts.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
We need enough space for the length we copy into the iclog, not just
some space, so tighten up the check a bit.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Various places check how much space is left in the current iclog,
add a helper for that.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
The xlog_write chain passes around the same seven variables that are
often passed by reference. Add a xlog_write_data structure to contain
them to improve code generation and readability.
This change increases the generated code size by about 140 bytes for my
x86_64 build, which is hopefully worth the much easier to follow code:
$ size fs/xfs/xfs_log.o*
text data bss dec hex filename
29300 1730 176 31206 79e6 fs/xfs/xfs_log.o
29160 1730 176 31066 795a fs/xfs/xfs_log.o.old
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
