Add support for the mediatek,mt8192-audsys compatible, which uses
a different audio controller (mt8192-afe-pcm) compared to mt8183
and mt2701.
This resolves a dtbs_check warning on all MT8192 devicetrees.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
The "gpuid" module parameter is used to override the gpuid read from a
hardware register and is useful for testing the loading of different
firmware (including processing of the firmware header) without having
the hardware to hand.
Signed-off-by: Alexandru Dadu <alexandru.dadu@imgtec.com>
Reviewed-by: Alessio Belle <alessio.belle@imgtec.com>
Link: https://patch.msgid.link/20260113-device-support-info-v1-4-91e5db7f7294@imgtec.com
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
We have a module parameter to set the initial group mask before debugfs is
available for any specific device, but don't currently use that value when
initialising devices.
Use the module parameter value as the initial value for group_mask.
Reviewed-by: Alessio Belle <alessio.belle@imgtec.com>
Link: https://patch.msgid.link/20260113-device-support-info-v1-3-91e5db7f7294@imgtec.com
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
This value can come from two places: a module parameter or a debugfs file.
In both cases, validate it early to provide feedback to userspace at the
time the value is set instead of deferring until the value is used.
Reviewed-by: Alessio Belle <alessio.belle@imgtec.com>
Link: https://patch.msgid.link/20260113-device-support-info-v1-2-91e5db7f7294@imgtec.com
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
We had a whole load of bloaty infrastructure to deal with module parameters
in a way that's wholly unnecessary. Strip it all back to basics to make
adding new parameters less of a headache.
Reviewed-by: Alessio Belle <alessio.belle@imgtec.com>
Link: https://patch.msgid.link/20260113-device-support-info-v1-1-91e5db7f7294@imgtec.com
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
This is a special device that's created dynamically and is supposed to
stay in memory forever. We also currently don't have a devlink between
it and the actual reset consumer. Suppress sysfs bind attributes so that
user-space can't unbind the device because - as of now - it will cause a
use-after-free splat from any user that puts the reset control handle.
Fixes: cee544a40e ("reset: gpio: Add GPIO-based reset controller")
Cc: stable@vger.kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
The fs/minix implementation of the minix filesystem does not currently
support any other value for s_log_zone_size than 0. This is also the
only value supported in util-linux; see mkfs.minix.c line 511. In
addition, this patch adds some sanity checking for the other minix
superblock fields, and moves the minix_blocks_needed() checks for the
zmap and imap also to minix_check_super_block().
This also closes a related syzbot bug report.
Signed-off-by: Jori Koolstra <jkoolstra@xs4all.nl>
Link: https://patch.msgid.link/20251208153947.108343-1-jkoolstra@xs4all.nl
Reviewed-by: Jan Kara <jack@suse.cz>
Reported-by: syzbot+5ad0824204c7bf9b67f2@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=5ad0824204c7bf9b67f2
Signed-off-by: Christian Brauner <brauner@kernel.org>
Possibility of no FW trace available after update in the fw_trace_mask due
to asynchronous mode of command consumption in the FW.
To ensure FW trace is available after update, wait for FW trace log update
command completion from the FW.
Fixes: cc1aeedb98 ("drm/imagination: Implement firmware infrastructure and META FW support")
Signed-off-by: Brajesh Gupta <brajesh.gupta@imgtec.com>
Reviewed-by: Matt Coster <matt.coster@imgtec.com>
Link: https://patch.msgid.link/20260108040936.129769-1-brajesh.gupta@imgtec.com
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
The rest of the DRM framework uses presence of the callbacks to check if
the particular infoframe is supported. Register HDMI callbacks
dynamically, basing on the corresponding drm_bridge ops.
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20260107-limit-infoframes-2-v4-9-213d0d3bd490@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
There is little point in generating InfoFrames which are not supported
by the driver. Skip generating the unsupported InfoFrames, making sure
that the kernel never tries to write the unsupported frame. As there are
no remaining usecases, change write_infoframe / clear_infoframe helpers
return an error if the corresponding callback is NULL.
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20260107-limit-infoframes-2-v4-8-213d0d3bd490@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Updating the InfoFrame if it can not be sent over the wire makes no
sense. Change drm_atomic_helper_connector_hdmi_update_audio_infoframe()
and drm_atomic_helper_connector_hdmi_clear_audio_infoframe() to return
an error if Audio InfoFrame callbacks are not implemented.
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20260107-limit-infoframes-2-v4-7-213d0d3bd490@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Havign a single set of InfoFrame callbacks doesn't provide enough
information to the DRM framework about the InfoFrame types that are
actually supported. Also it's not really future-proof: it provides a way
to program only a single Vendor-Specific frame, however we might need to
support multiple VSIs at the same time (e.g. HDMI vs HDMI Forum
VSIs).
Provide separate sets of callbacks, one per the InfoFrame type.
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20260107-limit-infoframes-2-v4-6-213d0d3bd490@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Having only a single set of callbacks, hdmi_clear_infoframe and
hdmi_write_infoframe, bridge drivers don't have an easy way to signal to
the DRM framework, which InfoFrames are actually supported by the
hardware and by the driver and which are not. Also, it makes it
extremely easy for HDMI bridge drivers to skip implementing the
seemingly required InfoFrames (e.g. HDMI VSI). Last, but not least,
those callbacks take a single 'type' parameter, which makes it
impossible to implement support for multiple VSIs (which will be
required once we start working on HDMI Forum VSI).
Split the callbacks into a per-InfoFrame-kind pairs, letting the bridge
drivers actually signal supported features. The implementation follows
the overall drm_bridge design, where the bridge has a single
drm_bridge_funcs implementation and signals, which functions are to be
called using the drm_bridge->ops flags.
The AVI and HDMI VSI are assumed to be required for a normal HDMI
operation (with the drivers getting a drm_warn_once() stub
implementation if one is missing). The Audio InfoFrame is handled by the
existing DRM_BRIDGE_OP_HDMI_AUDIO, while the SPD and HDR DRM InfoFrames
got new drm_bridge_ops values.
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20260107-limit-infoframes-2-v4-5-213d0d3bd490@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
We already require both hdmi_write_infoframe and hdmi_clear_infoframe
for bridges implementing DRM_BRIDGE_OP_HDMI. It makes sense to require
the clear_infoframes callback for HDMI connectors utilizing
drmm_connector_hdmi_init().
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20260107-limit-infoframes-2-v4-4-213d0d3bd490@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Verify the InfoFrames behaviour. Check that reporting InfoFrame as
unsupported doesn't result in a commit error. Also check that HDR and
Audio InfoFrames are not triggered if corresponding features are not
enabled.
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20260107-limit-infoframes-2-v4-1-213d0d3bd490@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Drop the driver-specific field_get() and field_prep() macros, in favor
of the globally available variants from <linux/bitfield.h>.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmltb/UeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGb3QH/1SeMiCPW/jZTLdr
J5ljJ5eldQXcE3lCDGRKF2s4BNuYrWTQnBh1pjcS1OSH6d5KLjmULf5/BznGHbWY
ZFjH1LL4A6HAWpg6BIPU9pPq6mZzAlu7ESxjXIFOavhuOA22OqF9GfoFxh1qF2er
ew8G4UqalGyD311jqfGjWAIHtMss5//JSc9RZ04SjeuI+8oUlBFKFiZgnQyaAKzv
ntBvQDdavzW1jG7KuWlCvN+0feApXoRP94va3PsZ9UdBqIxY39KTLtyluDE/Cu66
5D4lNaagmZUYPw3YSAsS+J/7Rr28ARp6J5ebzoupc7HfilofBkxWBea8/LaSrGTH
nBiGQac=
=IOwO
-----END PGP SIGNATURE-----
Merge tag 'v6.19-rc6' into tip-x86-cleanups
Pick up upstream work and
d9b40d7262 ("selftests/x86: Add selftests include path for kselftest.h after centralization")
especially which is a build fix needed for a selftests cleanup coming
ontop of this.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
This patch adds runtime power management support for platform-based
CoreSight Interconnect TNOC (ITNOC) devices. It introduces suspend and
resume callbacks to manage the APB clock (`pclk`) during device runtime
transitions.
Signed-off-by: Yuanfang Zhang <yuanfang.zhang@oss.qualcomm.com>
Reviewed-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20251203-itnoc-v5-3-5b97c63f2268@oss.qualcomm.com
This patch adds platform driver support for the CoreSight Interconnect
TNOC, Interconnect TNOC is a CoreSight link that forwards trace data
from a subsystem to the Aggregator TNOC. Compared to Aggregator TNOC,
it does not have aggregation and ATID functionality.
Key changes:
- Add platform driver `coresight-itnoc` with device tree match support.
- Refactor probe logic into a common `_tnoc_probe()` function.
- Conditionally initialize ATID only for AMBA-based TNOC blocks.
Signed-off-by: Yuanfang Zhang <yuanfang.zhang@oss.qualcomm.com>
Reviewed-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20251203-itnoc-v5-2-5b97c63f2268@oss.qualcomm.com
Add device tree binding for Qualcomm Coresight Interconnect Trace
Network On Chip (ITNOC). This TNOC acts as a CoreSight
graph link that forwards trace data from a subsystem to the
Aggregator TNOC, without aggregation or ATID functionality.
Signed-off-by: Yuanfang Zhang <yuanfang.zhang@oss.qualcomm.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20251203-itnoc-v5-1-5b97c63f2268@oss.qualcomm.com
The regions array is counted by nregions, but it's set only after
accessing it:
[] UBSAN: array-index-out-of-bounds in drivers/mtd/devices/mtd_intel_dg.c:750:15
[] index 0 is out of range for type '<unknown> [*]'
Fix it by also fixing an undesired behavior: the loop silently ignores
ENOMEM and continues setting the other entries.
CC: Gustavo A. R. Silva <gustavoars@kernel.org>
CC: Raag Jadav <raag.jadav@intel.com>
Reported-by: Jani Partanen <jiipee@sotapeli.fi>
Closes: https://lore.kernel.org/all/caca6c67-4f1d-49f1-948f-e63b6b937b29@sotapeli.fi
Fixes: ceb5ab3cb6 ("mtd: add driver for intel graphics non-volatile memory device")
Signed-off-by: Lucas De Marchi <demarchi@kernel.org>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
The Atmel NAND controller driver depends on an SRAM pool and has an
implicit assumption that the SRAM pool has already been created.
Changing the initcall ordering can break this. Unfortunately, fw_devlink
can't save us here as there's not a standard property to track the
dependency. So it's up to deferring probe to save us.
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Tested-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Convert Microchip 23K256 SPI SRAM MTD binding to YAML format.
Changes during conversion:
- Remove "address-cells" and "size-cells" from properties and
required sections as there is no child node for sram.
Signed-off-by: Akhila YS <akhilayalmati@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Convert NVIDIA Tegra NAND Flash Controller binding to YAML format.
Changes during Conversion:
- Define new properties `power-domains` and `operating-points-v2`
because the existing in tree DTS uses them.
- Modify MAINTAINERS references to point the created YAML file.
Signed-off-by: Charan Pedumuru <charan.pedumuru@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Currently even if none of the custom parsers are selected a struct
of_device_id and a dummy function that just returns -EOPNOTSUPP is
compiled in for each of them.
Its not obvious from the code but struct of_device_id is massive,
196 or 200 bytes (see link), so this is a lot more wasteful than you'd
think just skimming the code and assuming the wasted size is just the
length of the string with some small overhead.
If they aren't enabled use ifdef's to avoid anything being compiled
in and remove the dummy functions.
Link: https://lore.kernel.org/all/ef59d6fd3b2201b912d5eaa7f7a037d8f9adb744.1636561068.git.geert+renesas@glider.be/
Signed-off-by: Daniel Palmer <daniel@thingy.jp>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
When changes [1] and [2] have been applied to the driver etm4x, the
same modifications have been also collapsed in [3] and applied in
one shot to the driver etm3x.
While doing this, the driver etm3x has not been aligned to etm4x on
the use of non cpuslocked version of cpuhp callback setup APIs.
The current code triggers two run-time warnings when the kernel is
compiled with CONFIG_PROVE_LOCKING=y.
Use non cpuslocked version of cpuhp callback setup APIs in driver
etm3x, aligning it to the driver etm4x.
[1] commit 2d1a8bfb61 ("coresight: etm4x: Fix etm4_count race by
moving cpuhp callbacks to init")
[2] commit 22a550a306 ("coresight: etm4x: Allow etm4x to be built
as a module")
[3] commit 97fe626ce6 ("coresight: etm3x: Allow etm3x to be built
as a module")
Fixes: 97fe626ce6 ("coresight: etm3x: Allow etm3x to be built as a module")
Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260108152427.357379-1-antonio.borneo@foss.st.com
Use scoped for-each loop when iterating over device nodes to make code a
bit simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Acked-by: Pratyush Yadav <pratyush@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Use scoped for-each loop when iterating over device nodes to make code a
bit simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
"nfc->variant" is an enum, thus cast of pointer on 64-bit compile test
with clang W=1 causes:
vf610_nfc.c:843:17: error: cast to smaller integer type 'enum vf610_nfc_variant' from 'const void *' [-Werror,-Wvoid-pointer-to-enum-cast]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Use scoped for-each loop when iterating over device nodes to make code a
bit simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Use scoped for-each loop when iterating over device nodes to make code a
bit simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Use scoped for-each loop when iterating over device nodes to make code a
bit simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Use scoped for-each loop when iterating over device nodes to make code a
bit simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
cadence_nand_cdma_send_and_wait() propagates negative errno values
from cadence_nand_cdma_send(), returns -ETIMEDOUT on failure and -EIO
when the CDMA engine reports a command failure.
However, it is declared as u32, causing error codes to wrap.
Change the return type to int to correctly propagate errors.
Fixes: ec4ba01e89 ("mtd: rawnand: Add new Cadence NAND driver to MTD subsystem")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Replace legacy DRM_DEBUG/INFO/WARN/ERROR logging with the corresponding
device-based drm_dbg(), drm_info(), drm_warn() and drm_err() helpers.
For some messages, adjust the log level to better reflect their severity.
This allows filtering via drm.debug, reduces log spam, and helps
differentiate v3d logs from vc4 logs.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patch.msgid.link/20260112-v3d-drm-debug-v2-2-8ef6244c97bb@igalia.com
Signed-off-by: Maíra Canal <mcanal@igalia.com>
All CPU job extension parsers duplicate the same validation procedure:
ensure the extension is attached to a CPU job (not a GPU job) and that
only a single CPU job extension is associated with a given job.
Create a function to consolidate these checks and reduce the boilerplate
across the various CPU job extension handlers. While here, convert the
legacy DRM_DEBUG with a more appropriate drm_dbg().
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patch.msgid.link/20260112-v3d-drm-debug-v2-1-8ef6244c97bb@igalia.com
Signed-off-by: Maíra Canal <mcanal@igalia.com>
"b" is ratified (Apr/2024) much later than its components zba/zbb/zbs
(Jun/2021). With "b" added into riscv/extensions.yaml, a dependency
checking rule is now enforced, which requires that when zba, zbb, and zbs
are all specified, "b" must be added as well. Failing to do this will
cause dtbs_check schema check warnings.
According to uabi.rst, as a single-letter extension, "b" should be added
after "c" in canonical order.
Update dr1v90.dtsi to conform to this rule. Line balancing is performed
to improve readability.
Signed-off-by: Guodong Xu <guodong@riscstar.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
With some panels informing support for Panel Replay we are observing
problems if having Panel Replay enable bit set on sink when forced to use
PSR instead of Panel Replay. Avoid these problems by not setting Panel
Replay enable bit in sink when Panel Replay is globally disabled during
link training. I.e. disabled by module parameter.
The enable bit is still set when disabling Panel Replay via debugfs
interface. Added note comment about this.
Fixes: 68f3a505b3 ("drm/i915/psr: Enable Panel Replay on sink always when it's supported")
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: <stable@vger.kernel.org> # v6.15+
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patch.msgid.link/20260115070039.368965-1-jouni.hogander@intel.com
(cherry picked from commit c5a52cd04e)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
This will be used by the Tyr driver to create and modify the page table
of each address space on the GPU. Each time a mapping gets created or
removed by userspace, Tyr will call into GPUVM, which will figure out
which calls to map_pages and unmap_pages are required to map the data in
question in the page table so that the GPU may access those pages when
using that address space.
The Rust type wraps the struct using a raw pointer rather than the usual
Opaque+ARef approach because Opaque+ARef requires the target type to be
refcounted.
Signed-off-by: Asahi Lina <lina+kernel@asahilina.net>
Acked-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Tested-by: Deborah Brouwer <deborah.brouwer@collabora.com>
Co-developed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
[joro: Fixed up Rust import style]
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
AMD Secure Memory Encryption (SME) marks individual memory pages as
encrypted by setting the C-bit in page table entries. According to the
AMD APM,any pages corresponding to MMIO addresses must be configured
with the C-bit clear.
The current *_iommu_set_prot() implementation sets the C-bit on all PTEs
in the IOMMU page tables. This is incorrect for PTEs backed by MMIO, and
can break PCIe peer-to-peer communication when IOVA is used. Fix this by
avoiding the C-bit for MMIO-backed mappings.
For amdv2 IOMMU page tables, there is a usage scenario for GVA->GPA
mappings, and for the trusted MMIO in the TEE-IO case, the C-bit will need
to be added to GPA. However, SNP guests do not yet support vIOMMU, and the
trusted MMIO support is not ready in upstream. Adding the C-bit for trusted
MMIO can be considered once those features land.
Fixes: 879ced2bab ("iommupt: Add the AMD IOMMU v1 page table format")
Fixes: aef5de756e ("iommupt: Add the x86 64 bit page table format")
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Wei Wang <wei.w.wang@hotmail.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
