Add descriptions for the Zilsd (Load/Store pair instructions) and
Zclsd (Compressed Load/Store pair instructions) ISA extensions
which were ratified in commit f88abf1 ("Integrating load/store
pair for RV32 with the main manual") of the riscv-isa-manual.
Signed-off-by: Pincheng Wang <pincheng.plct@isrc.iscas.ac.cn>
Reviewed-by: Nutty Liu <nutty.liu@hotmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20250826162939.1494021-2-pincheng.plct@isrc.iscas.ac.cn
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Let's not call atomic_long_xchg() on something that's not an
atomic_long_t, and just use xchg() instead. Continues the cleanup
from commit 546e42c8c6 ("riscv: Use an atomic xchg in
pudp_huge_get_and_clear()"),
Cc: Alexandre Ghiti <alex@ghiti.fr>
Signed-off-by: Paul Walmsley <pjw@kernel.org>
When !CONFIG_SMP, there's no need for atomic operations in
ptep_get_and_clear(), so, similar to x86, let's not use atomics in
this case.
Cc: Alexandre Ghiti <alex@ghiti.fr>
Signed-off-by: Paul Walmsley <pjw@kernel.org>
When !CONFIG_SMP, there's no need for atomic operations in
pmdp_huge_get_and_clear(), so, similar to what x86 does, let's not use
atomics in this case. See also commit 546e42c8c6 ("riscv: Use an
atomic xchg in pudp_huge_get_and_clear()").
Cc: Alexandre Ghiti <alex@ghiti.fr>
Signed-off-by: Paul Walmsley <pjw@kernel.org>
The function save_v_state() served two purposes. First, it saved
extension context into the signal stack. Then, it constructed the
extension header if there was no fault. The second part is independent
of the extension itself. As a result, we can pull that part out, so
future extensions may reuse it. This patch adds arch_ext_list and makes
setup_sigcontext() go through all possible extensions' save() callback.
The callback returns a positive value indicating the size of the
successfully saved extension. Then the kernel proceeds to construct the
header for that extension. The kernel skips an extension if it does
not exist, or if the saving fails for some reasons. The error code is
propagated out on the later case.
This patch does not introduce any functional changes.
Signed-off-by: Andy Chiu <andybnac@gmail.com>
Link: https://patch.msgid.link/20251112-v5_user_cfi_series-v23-16-b55691eacf4f@rivosinc.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
WCL supports a maximum of HBR3 8.1 Gbps for both eDP/DP.
Limit the max source rate to HBR3 for WCL.
v2: Move the check inside mtl_max_source_rate(). (Suraj)
Bspec:74286
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20251122053651.759389-1-ankit.k.nautiyal@intel.com
Replace the for loop with a call to crypto_unregister_algs(). Return
'ret' immediately and remove the goto statement to simplify the error
handling code.
In crypto_unregister_algs(), unregister the algorithms in reverse order.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Replace the for loop with a call to crypto_unregister_scomps(). Return
'ret' immediately and remove the goto statement to simplify the error
handling code. No functional changes.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Document x1e80100 compatible for the True Random Number Generator.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Harshal Dev <harshal.dev@oss.qualcomm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add the __maybe_unused attribute to the crypto_scomp_show() definition
and remove the now-unnecessary forward declaration.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The fips_enable() function is only invoked early during kernel boot via the
__setup() macro ("fips=" command line parameter), and is never used again
after initialization completes.
Annotating it with __init places the function in the .init.text section,
allowing the kernel to free its memory after init (when freeing_initmem()
runs), reducing runtime memory footprint.
This is a standard practice for setup/early-parse functions and has no
functional impact — the parsing logic, return values, and fips mode
setting behavior remain unchanged.
Signed-off-by: Can Peng <pengcan@kylinos.cn>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
iaa_unregister_compression_device() always returns 0, making the debug
log message unreachable. Remove the log statement and convert
iaa_unregister_compression_device() to a void function.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Acked-by: Kanchana P Sridhar <kanchana.p.sridhar@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Return the result directly to simplify init_iaa_device().
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The local variable 'i' is initialized with -EINVAL, but the for loop
immediately overwrites it and -EINVAL is never returned.
If no empty compression mode can be found, the function would return the
out-of-bounds index IAA_COMP_MODES_MAX, which would cause an invalid
array access in add_iaa_compression_mode().
Fix both issues by returning either a valid index or -EINVAL.
Cc: stable@vger.kernel.org
Fixes: b190447e0f ("crypto: iaa - Add compression mode management along with fixed mode")
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Acked-by: Kanchana P Sridhar <kanchana.p.sridhar@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
OTX_CPT_UCODE_NAME_LENGTH limits the microcode name to 64 bytes. If a
user writes a string of exactly 64 characters, the original code used
'strlen(buf) > 64' to check the length, but then strscpy() copies only
63 characters before adding a NUL terminator, silently truncating the
copied string.
Fix this off-by-one error by using 'count' directly for the length check
to ensure long names are rejected early and copied without truncation.
Cc: stable@vger.kernel.org
Fixes: d9110b0b01 ("crypto: marvell - add support for OCTEON TX CPT engine")
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Move the conflicting declaration to the end of the corresponding
structure. Notice that `struct ahash_request` is a flexible structure,
this is a structure that contains a flexible-array member.
With these changes fix the following warning:
drivers/crypto/allwinner/sun8i-ss/sun8i-ss.h:251:30: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In qm_get_complete_eqe_num(), the function entry has already
checked whether the interrupt is valid, so the interrupt event
can be processed directly. Currently, the interrupt valid bit is
being checked again redundantly, and no interrupt processing is
performed. Therefore, the loop condition should be modified to
directly process the interrupt event, and use do while instead of
the current while loop, because the condition is always satisfied
on the first iteration.
Fixes: f5a332980a ("crypto: hisilicon/qm - add the save operation of eqe and aeqe")
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Move the conflicting declaration to the end of the corresponding
structure. Notice that `struct ahash_request` is a flexible structure,
this is a structure that contains a flexible-array member.
With these changes fix the following warning:
drivers/crypto/starfive/jh7110-cryp.h:219:49: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Building the QAT driver with -Wmaybe-uninitialized triggers warnings in
qat_common/adf_pfvf_pf_proto.c. Specifically, the variables blk_type,
blk_byte, and byte_max may be used uninitialized in handle_blkmsg_req():
make M=drivers/crypto/intel/qat W=1 C=2 "KCFLAGS=-Werror" \
KBUILD_CFLAGS_KERNEL=-Wmaybe-uninitialized \
CFLAGS_MODULE=-Wmaybe-uninitialized
...
warning: ‘byte_max’ may be used uninitialized [-Wmaybe-uninitialized]
warning: ‘blk_type’ may be used uninitialized [-Wmaybe-uninitialized]
warning: ‘blk_byte’ may be used uninitialized [-Wmaybe-uninitialized]
Although the caller of handle_blkmsg_req() always provides a req.type
that is handled by the switch, the compiler cannot guarantee this.
Add a default case to the switch statement to handle an invalid req.type.
Fixes: 673184a2a5 ("crypto: qat - introduce support for PFVF block messages")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Register the functions required to save and restore the state of a ring
bank on the qat_420xx device. Since this logic is shared across QAT
GEN4 devices, reuse the existing GEN4 implementation.
This functionality enables saving and restoring the state of a Virtual
Function (VF), which is required for supporting VM Live Migration.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The macro ICP_QAT_FW_COMN_FLAGS_BUILD sets flags in the firmware
descriptor to indicate:
* Whether the content descriptor is a pointer or contains embedded
data.
* Whether the source and destination buffers are scatter-gather lists
or flat buffers.
The correct parameter order is:
* First: content descriptor type
* Second: source/destination pointer type
In the asymmetric crypto code, the macro was used with the parameters
swapped. Although this does not cause functional issues, since both
macros currently evaluate to 0, it is incorrect.
Fix the parameter order in the Diffie-Hellman and RSA code paths.
Fixes: a990532023 ("crypto: qat - Add support for RSA algorithm")
Fixes: c9839143eb ("crypto: qat - Add DH support")
Reported-by: Qihua Dai <qihua.dai@intel.com> # off-list
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
As soon as crypto_aead_encrypt is called, the underlying request
may be freed by an asynchronous completion. Thus dereferencing
req->iv after it returns is invalid.
Instead of checking req->iv against info, create a new variable
unaligned_info and use it for that purpose instead.
Fixes: 0a270321db ("[CRYPTO] seqiv: Add Sequence Number IV Generator")
Reported-by: Xiumei Mu <xmu@redhat.com>
Reported-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The current validation 'wire_order[i] > ARRAY_SIZE(config_pins)' allows
wire_order[i] to equal ARRAY_SIZE(config_pins), which causes out-of-bounds
access when used as index in 'config_pins[wire_order[i]]'.
Since config_pins has 4 elements (indices 0-3), the valid range for
wire_order should be 0-3. Fix the off-by-one error by using >= instead
of > in the validation check.
Signed-off-by: Junjie Cao <junjie.cao@intel.com>
Link: https://patch.msgid.link/20251114062817.852698-1-junjie.cao@intel.com
Fixes: bb76dc09dd ("input: ti_am33x_tsc: Order of TSC wires, made configurable")
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The mdelay() is called in sleeping context and it should be OK to delay
slightly longer than requested, so switch the code to use fsleep() to
avoid spinning.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The ilitek touchscreen driver uses the non-sleeping gpiod_set_value
function for reset.
Switch to using gpiod_set_value_cansleep() when controlling reset_gpio to
support GPIO providers that may sleep, such as I2C GPIO expanders.
Further switch the mdelay calls on the reset path to fsleep (preferred
in non-atomic contexts).
This fixes noisy complaints in kernel log for gpio providers that do
sleep.
Signed-off-by: Josua Mayer <josua@solid-run.com>
Link: https://patch.msgid.link/20251201-imx8mp-hb-iiot-v4-2-53a4cd6c21bf@solid-run.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
ABS_SND_PROFILE used to describe the state of a multi-value sound profile
switch. This will be used for the alert-slider on OnePlus phones or other
phones.
Profile values added as SND_PROFLE_(SILENT|VIBRATE|RING) identifiers
to input-event-codes.h so they can be used from DTS.
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Tested-by: Guido Günther <agx@sigxcpu.org> # oneplus,fajita & oneplus,enchilada
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Pavel Machek <pavel@ucw.cz>
Link: https://patch.msgid.link/20251113-op6-tri-state-v8-1-54073f3874bc@ixit.cz
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Like the TWL4030, these PMICs also have a power button feature, so extend
the TWL4030 power button driver. As the irqchip of the TWL6030 mfd driver
does not provide mask, unmask finctions, do it manually.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Link: https://patch.msgid.link/20251106-twl6030-button-v4-2-fdf1aa6e1e9a@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Currently if a user enqueue a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistentcy cannot be addressed without refactoring the API.
alloc_workqueue() treats all queues as per-CPU by default, while unbound
workqueues must opt-in via WQ_UNBOUND.
This default is suboptimal: most workloads benefit from unbound queues,
allowing the scheduler to place worker threads where they’re needed and
reducing noise when CPUs are isolated.
This patch continues the effort to refactor worqueue APIs, which has begun
with the change introducing new workqueues and a new alloc_workqueue flag:
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
This specific workload do not benefit from a per-cpu workqueue, so use
WQ_UNBOUND on the custom workqueue instead.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU.
Once migration is complete, WQ_UNBOUND can be removed and unbound will
become the implicit default.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://patch.msgid.link/20251106141955.218911-5-marco.crivellari@suse.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Currently if a user enqueues a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistency cannot be addressed without refactoring the API.
This patch continues the effort to refactor worqueue APIs, which has begun
with the change introducing new workqueues and a new alloc_workqueue flag:
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
This specific workload do not benefit from a per-cpu workqueue, so use
the default unbound workqueue (system_dfl_wq) instead.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://patch.msgid.link/20251106141955.218911-4-marco.crivellari@suse.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Currently if a user enqueues a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistency cannot be addressed without refactoring the API.
This patch continues the effort to refactor worqueue APIs, which has begun
with the change introducing new workqueues and a new alloc_workqueue flag:
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
This specific workload do not benefit from a per-cpu workqueue, so use
the default unbound workqueue (system_dfl_wq) instead.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://patch.msgid.link/20251106141955.218911-3-marco.crivellari@suse.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Currently if a user enqueues a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistency cannot be addressed without refactoring the API.
This patch continues the effort to refactor worqueue APIs, which has begun
with the change introducing new workqueues and a new alloc_workqueue flag:
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
This specific workload do not benefit from a per-cpu workqueue, so use
the default unbound workqueue (system_dfl_wq) instead.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://patch.msgid.link/20251106141955.218911-2-marco.crivellari@suse.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
In irq_domain_set_name() a const pointer is passed in, and then the
const is "lost" when container_of() is called. Fix this up by properly
preserving the const pointer attribute when container_of() is used to
enforce the fact that this pointer should not have anything at it
changed.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/2025121731-facing-unhitched-63ae@gregkh
Sphinx reports htmldocs warnings:
Documentation/gpu/xe/xe_firmware:31: ./drivers/gpu/drm/xe/xe_guc_pc.c:76: ERROR: A level 2 section cannot be used here.
Documentation/gpu/xe/xe_firmware:31: ./drivers/gpu/drm/xe/xe_guc_pc.c:87: ERROR: A level 2 section cannot be used here.
The xe_guc_pc.c documentation is included inside xe_firmware.rst.
The headers in the C file currently use '=' underlines, which conflict with
the parent document's section levels.
Fix this by demoting "Frequency management" and "Render-C States" headers
from '=' to '-' to correctly nest them as subsections.
Build environment: Python 3.13.7 Sphinx 8.2.3 docutils 0.22.3
Signed-off-by: Swaraj Gaikwad <swarajgaikwad1925@gmail.com>
Link: https://patch.msgid.link/20251209094836.18589-1-swarajgaikwad1925@gmail.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
posted_msi_supported() is a misnomer as it actually checks whether it is
enabled or not. Aside of that this does not take CONFIG_X86_POSTED_MSI into
account which is required to actually use it.
Rename it to posted_msi_enabled() and make the return value depend on
CONFIG_X86_POSTED_MSI, which allows the compiler to eliminate the related
dead code and data if disabled:
text data bss dec hex filename
10046 701 3296 14043 36db drivers/iommu/intel/irq_remapping.o
9904 413 3296 13613 352d drivers/iommu/intel/irq_remapping.o
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/20251125214631.170499997@linutronix.de
Mark CRI as one that have the CSC NVM device.
Update the writable override flow to take the information from
the scratch register for CRI.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/20251216111034.3093507-1-alexander.usyskin@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
- Add Documentation/core-api/tracepoint.rst to TRACING in MAINTAINERS file
Updates to the tracepoint.rst document should be reviewed by the
tracing maintainers.
- Fix warning triggered by perf attaching to synthetic events
The synthetic events do not add a function to be registered when
perf attaches to them. This causes a warning when perf registers
a synthetic event and passes a NULL pointer to the tracepoint register
function. Ideally synthetic events should be updated to work with
perf, but as that's a feature and not a bug fix, simply now return
-ENODEV when perf tries to register an event that has a NULL pointer
for its function. This no longer causes a kernel warning and simply
causes the perf code to fail with an error message.
- Fix 32bit overflow in option flag test
The option's flags changed from 32 bits in size to 64 bits in size.
Fix one of the places that shift 1 by the option bit number to
to be 1ULL.
- Fix the output of printing the direct jmp functions
The enabled_functions that shows how functions are being attached by
ftrace wasn't updated to accommodate the new direct jmp trampolines
that set the LSB of the pointer, and outputs garbage. Update the
output to handle the direct jmp trampolines.
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaURuVxQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qhU1AQCe3AwEiPg4PAooR7D3TDgj4ypJXUwS
J7PM0cvniKhJ2AD/VpSQCyj7sB8UQdVE04SK3hxduVwHIzrBhDe2voC8eQQ=
=C9zF
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Add Documentation/core-api/tracepoint.rst to TRACING in MAINTAINERS
file
Updates to the tracepoint.rst document should be reviewed by the
tracing maintainers.
- Fix warning triggered by perf attaching to synthetic events
The synthetic events do not add a function to be registered when perf
attaches to them. This causes a warning when perf registers a
synthetic event and passes a NULL pointer to the tracepoint register
function.
Ideally synthetic events should be updated to work with perf, but as
that's a feature and not a bug fix, simply now return -ENODEV when
perf tries to register an event that has a NULL pointer for its
function. This no longer causes a kernel warning and simply causes
the perf code to fail with an error message.
- Fix 32bit overflow in option flag test
The option's flags changed from 32 bits in size to 64 bits in size.
Fix one of the places that shift 1 by the option bit number to to be
1ULL.
- Fix the output of printing the direct jmp functions
The enabled_functions that shows how functions are being attached by
ftrace wasn't updated to accommodate the new direct jmp trampolines
that set the LSB of the pointer, and outputs garbage. Update the
output to handle the direct jmp trampolines.
* tag 'trace-v6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ftrace: Fix address for jmp mode in t_show()
tracing: Fix UBSAN warning in __remove_instance()
tracing: Do not register unsupported perf events
MAINTAINERS: add tracepoint core-api doc files to TRACING
- Fix a performance issue with the scoped_ksimd() macro (new in 6.19)
where it unnecessarily initialized the entire fpsimd state.
- Add a missing gitignore entry for a generated file added in 6.18.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCaURPFxQcZWJpZ2dlcnNA
a2VybmVsLm9yZwAKCRDzXCl4vpKOK5mJAQDGJf9ee26tDWeIEmd8YLv0tsptv8nB
e0nV+HnkAujAkQD/XGQttmBq9vBElRd1xeiQEgzYS1i+VRZO4Wa9wPEQWwg=
=KPuD
-----END PGP SIGNATURE-----
Merge tag 'libcrypto-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull crypto library fixes from Eric Biggers:
- Fix a performance issue with the scoped_ksimd() macro (new in 6.19)
where it unnecessarily initialized the entire fpsimd state.
- Add a missing gitignore entry for a generated file added in 6.18.
* tag 'libcrypto-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
lib/crypto: riscv: Add poly1305-core.S to .gitignore
arm64/simd: Avoid pointless clearing of FP/SIMD buffer
Add a missing PCC check for guaranteed_perf in the ACPI CPPC
library and fix a static local variable access race condition
in acpi_pcc_address_space_setup() (Pengjie Zhang).
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmlEXAMSHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO1mIIIAKfHlyXaIwE1cG+9PJZ5OrJjWva2pfmP
itbphuEtHbgnvJqTgrajc3MKK080YvdyM6iwS99JzhWARLPbPvp3foS0Zl3Lh1dh
uDUF4u7qpi/8J2chxFJUsPopeLHGKBfj6vxw9HWQGVM7QiQMm4IdHMuOZ2EoFfqc
KeNNg1Ni/33UoDM5xilCnVZe1LkTBFCUakdtaJ2lp/2I0o7hjjHnv3NmEndGCFTb
yAGd8O9IY/xyZluph5RmjLsoXlepY0LEb+XSDc0oIvrEge9mhdd6uIreRTdphJz8
IuaauOVqkrlEQ1AtkOL6h2JFg9wZgxuL3uX/1fUf3HWbafiCur5Zn8k=
=l3oz
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These add a missing PCC check for guaranteed_perf in the ACPI CPPC
library and fix a static local variable access race condition in
acpi_pcc_address_space_setup() (Pengjie Zhang)"
* tag 'acpi-6.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: PCC: Fix race condition by removing static qualifier
ACPI: CPPC: Fix missing PCC check for guaranteed_perf
- Fix CPU hotplug locking deadlock reported by lockdep after a recent
update of the Intel RAPL power capping driver (Srinivas Pandruvada)
- Fix sscanf() error return value handling in the power capping core
and a race condition in register_control_type() (Sumeet Pawnikar)
- Fix a concurrent bit field update issue in the runtime PM core code
by only updating the bit field in question when runtime PM is
disabled (Rafael Wysocki)
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmlEWLsSHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO1mloH/3ioUyzreSj90UTRA7B5HP/965pNWYOE
io3nNcYvVt00cvIsCai2KfhGxC5rcan1jGAl0ZeGOFlKzK1u9DsVl8SBpOsRr39a
QB7fuOPICwTJNuksPsHcvU7sBOMIPR7oNC9sWl41oa0IdKJDkJfHRSnNu9xO8B6L
B8fBGPuHYMgKMOVuax1WgzMFMCMxbjARE1p+SU9b+/Ojjdp+lg6oRzGQsUoy0JEy
9tnVLzMdroin+ae1UcXLLpJU6NsPBxeg1uV+tmMb9Hm8fZl8+WGDzF7/3mZV1a+k
xDXrWpFtmtUYXYu6hK6rs4sY+49N4UI4sP2P0SKMedtQ1qmnMEil/wk=
=AGwI
-----END PGP SIGNATURE-----
Merge tag 'pm-6.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix three issues in the power capping code including one recent
regression and a runtime PM framework regression introduced during the
6.17 development cycle:
- Fix CPU hotplug locking deadlock reported by lockdep after a recent
update of the Intel RAPL power capping driver (Srinivas Pandruvada)
- Fix sscanf() error return value handling in the power capping core
and a race condition in register_control_type() (Sumeet Pawnikar)
- Fix a concurrent bit field update issue in the runtime PM core code
by only updating the bit field in question when runtime PM is
disabled (Rafael Wysocki)"
* tag 'pm-6.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
powercap: intel_rapl: Fix possible recursive lock warning
PM: runtime: Do not clear needs_force_resume with enabled runtime PM
powercap: fix sscanf() error return value handling
powercap: fix race condition in register_control_type()
- Set a feature flag in the int340x thermal driver to enable the
power slider interface for Wildcat Lake processors (Srinivas
Pandruvada)
- Fix typo and indentation in comments in the thermal core (Thorsten
Blum)
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmlEW84SHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO1dtoH/1RYu0QSZDMud/0UOX4Vipj8Gw9yIFaE
W8yTaVSlnZ/S0T4Q7MyPvSaqPYs4l0sm3c796afTL12JiW9SqzOsGWPbJzZiDMQ6
4zID4qZ/db4UN9WEmDAD6TGA9qZhtsXVNN01TQxYiJhK/KJ/62EYVEoI4o7rgto7
jYsI/Ulfvdx7nwx2mmvdBARPstOvnxkj+2M7ezWYKjvx/oJpEdjZLeWe+zyCwkhj
NAkOLKPWpBKLDH+wZPEeYkowOShVTSUFXPw/CEg+wcO5iUOwN+zb7gKNpyw1M1gc
v/5EtTUdnHsuX7Q1O+Q8omTeGNCp14w12wc4hoEdsuGTpfQ0p9ofBo4=
=8F9W
-----END PGP SIGNATURE-----
Merge tag 'thermal-6.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fixes from Rafael Wysocki:
"These enable a new hardware feature in the int340x thermal driver and
fix up comments in the thermal core code:
- Set a feature flag in the int340x thermal driver to enable the
power slider interface for Wildcat Lake processors (Srinivas
Pandruvada)
- Fix typo and indentation in comments in the thermal core (Thorsten
Blum)"
* tag 'thermal-6.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: core: Fix typo and indentation in comments
thermal: intel: int340x: Enable power slider interface for Wildcat Lake
Under certain conditions (more prevalent after a suspend/resume cycle),
the touchscreen controller can send the "boot complete" interrupt before
it actually finished booting. In those cases, attempting to read touch
data resuls in a stream of "not ready" messages being read and
interpreted as a touch report. Check that the response is in fact a
touch report and discard it otherwise.
Reported-by: pitust <piotr@stelmaszek.com>
Closes: https://oftc.catirclogs.org/asahi/2025-12-17#34878715;
Fixes: 471a92f8a2 ("Input: apple_z2 - add a driver for Apple Z2 touchscreens")
Signed-off-by: Sasha Finkelstein <fnkl.kernel@gmail.com>
Link: https://patch.msgid.link/20251218-z2-init-fix-v1-1-48e3aa239caf@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Few minor fixes, other than the randconfig fix this is only relevant to
test code, not releases.
- Randconfig failure if CONFIG_DMA_SHARED_BUFFER is not set
- Remove gcc warning in kselftest
- Fix a refcount leak on an error path in the selftest support code
- Fix missing overflow checks in the selftest support code
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCaURMcAAKCRCFwuHvBreF
YUUIAP4u6RUth7SkqxnoM8KOqsV3YaT721AFc+lH/NA4D+XX3gD/VRHwORq8RiCQ
APzvUXP/+j+FBy2b0NINfGOdr+cfLAI=
=0fWH
-----END PGP SIGNATURE-----
Merge tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd fixes from Jason Gunthorpe:
"A few minor fixes, other than the randconfig fix this is only relevant
to test code, not releases:
- Randconfig failure if CONFIG_DMA_SHARED_BUFFER is not set
- Remove gcc warning in kselftest
- Fix a refcount leak on an error path in the selftest support code
- Fix missing overflow checks in the selftest support code"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommufd/selftest: Check for overflow in IOMMU_TEST_OP_ADD_RESERVED
iommufd/selftest: Do not leak the hwpt if IOMMU_TEST_OP_MD_CHECK_MAP fails
iommufd/selftest: Make it clearer to gcc that the access is not out of bounds
iommufd: Fix building without dmabuf
In the region invalidation failure path in
mshv_region_interval_invalidate(), the region mutex is not released. Fix
it by releasing the mutex in the failure path.
Signed-off-by: Anirudh Rayabharam (Microsoft) <anirudh@anirudhrb.com>
Fixes: b9a66cd5cc ("mshv: Add support for movable memory regions")
Acked-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Reviewed-by: Roman Kisel <vdso@mailbox.org>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Current release - regressions:
- netfilter: nf_conncount: fix leaked ct in error paths
- sched: act_mirred: fix loop detection
- sctp: fix potential deadlock in sctp_clone_sock()
- can: fix build dependency
- eth: mlx5e: do not update BQL of old txqs during channel reconfiguration
Previous releases - regressions:
- sched: ets: always remove class from active list before deleting it
- inet: frags: flush pending skbs in fqdir_pre_exit()
- netfilter: nf_nat: remove bogus direction check
- mptcp:
- schedule rtx timer only after pushing data
- avoid deadlock on fallback while reinjecting
- can: gs_usb: fix error handling
- eth: mlx5e:
- avoid unregistering PSP twice
- fix double unregister of HCA_PORTS component
- eth: bnxt_en: fix XDP_TX path
- eth: mlxsw: fix use-after-free when updating multicast route stats
Previous releases - always broken:
- ethtool: avoid overflowing userspace buffer on stats query
- openvswitch: fix middle attribute validation in push_nsh() action
- eth: mlx5: fw_tracer, validate format string parameters
- eth: mlxsw: spectrum_router: fix neighbour use-after-free
- eth: ipvlan: ignore PACKET_LOOPBACK in handle_mode_l2()
Misc:
- Jozsef Kadlecsik retires from maintaining netfilter
- tools: ynl: fix build on systems with old kernel headers
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=6pla
-----END PGP SIGNATURE-----
Merge tag 'net-6.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter and CAN.
Current release - regressions:
- netfilter: nf_conncount: fix leaked ct in error paths
- sched: act_mirred: fix loop detection
- sctp: fix potential deadlock in sctp_clone_sock()
- can: fix build dependency
- eth: mlx5e: do not update BQL of old txqs during channel
reconfiguration
Previous releases - regressions:
- sched: ets: always remove class from active list before deleting it
- inet: frags: flush pending skbs in fqdir_pre_exit()
- netfilter: nf_nat: remove bogus direction check
- mptcp:
- schedule rtx timer only after pushing data
- avoid deadlock on fallback while reinjecting
- can: gs_usb: fix error handling
- eth:
- mlx5e:
- avoid unregistering PSP twice
- fix double unregister of HCA_PORTS component
- bnxt_en: fix XDP_TX path
- mlxsw: fix use-after-free when updating multicast route stats
Previous releases - always broken:
- ethtool: avoid overflowing userspace buffer on stats query
- openvswitch: fix middle attribute validation in push_nsh() action
- eth:
- mlx5: fw_tracer, validate format string parameters
- mlxsw: spectrum_router: fix neighbour use-after-free
- ipvlan: ignore PACKET_LOOPBACK in handle_mode_l2()
Misc:
- Jozsef Kadlecsik retires from maintaining netfilter
- tools: ynl: fix build on systems with old kernel headers"
* tag 'net-6.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (83 commits)
net: hns3: add VLAN id validation before using
net: hns3: using the num_tqps to check whether tqp_index is out of range when vf get ring info from mbx
net: hns3: using the num_tqps in the vf driver to apply for resources
net: enetc: do not transmit redirected XDP frames when the link is down
selftests/tc-testing: Test case exercising potential mirred redirect deadlock
net/sched: act_mirred: fix loop detection
sctp: Clear inet_opt in sctp_v6_copy_ip_options().
sctp: Fetch inet6_sk() after setting ->pinet6 in sctp_clone_sock().
net/handshake: duplicate handshake cancellations leak socket
net/mlx5e: Don't include PSP in the hard MTU calculations
net/mlx5e: Do not update BQL of old txqs during channel reconfiguration
net/mlx5e: Trigger neighbor resolution for unresolved destinations
net/mlx5e: Use ip6_dst_lookup instead of ipv6_dst_lookup_flow for MAC init
net/mlx5: Serialize firmware reset with devlink
net/mlx5: fw_tracer, Handle escaped percent properly
net/mlx5: fw_tracer, Validate format string parameters
net/mlx5: Drain firmware reset in shutdown callback
net/mlx5: fw reset, clear reset requested on drain_fw_reset
net: dsa: mxl-gsw1xx: manually clear RANEG bit
net: dsa: mxl-gsw1xx: fix .shutdown driver operation
...
-----BEGIN PGP SIGNATURE-----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=Oj0h
-----END PGP SIGNATURE-----
Merge tag 'v6.19-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
- important fix for reconnect problem
- minor cleanup
* tag 'v6.19-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: update internal module version number
smb: move some SMB1 definitions into common/smb1pdu.h
smb: align durable reconnect v2 context to 8 byte boundary
