When cloning with node replacements (IORING_REGISTER_DST_REPLACE),
destination entries after the cloned range are not copied over.
Add logic to copy them over to the new destination table.
Fixes: c1329532d5 ("io_uring/rsrc: allow cloning with node replacements")
Cc: stable@vger.kernel.org
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Many of the nvmet-fc log messages cannot print the device used, because
it's not there yet:
(NULL device *): {0:0} Association deleted
Use the pr_* macros consistently throughout the module and match the
output of the nvme-fc module.
Using port:association ids are more useful when debugging what's going
on, because these match now with the log entries from nvme-fc.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
The variable holds nodes from the destination ring's existing buffer
table. In io_clone_buffers(), the term "src" is used to refer to the
source ring.
Rename to node for clarity.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Get rid of some redundant checks and move the src arg validation to
before the buffer table allocation, which simplifies error handling.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Nothing is using lsdir member in struct fcloop_lsreq.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
When the remoteport or the targetport are removed check that there are
no inflight requests or responses.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
When the rport is removed there shouldn't be any in flight request or
responses.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Move the fatal signal check before bio_alloc() to prevent a memory
leak when BLKDEV_ZERO_KILLABLE is set and a fatal signal is pending.
Previously, the bio was allocated before checking for a fatal signal.
If a signal was pending, the code would break out of the loop without
freeing or chaining the just-allocated bio, causing a memory leak.
This matches the pattern already used in __blkdev_issue_write_zeroes()
where the signal check precedes the allocation.
Fixes: bf86bcdb40 ("blk-lib: check for kill signal in ioctl BLKZEROOUT")
Reported-by: syzbot+527a7e48a3d3d315d862@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=527a7e48a3d3d315d862
Signed-off-by: Shaurya Rane <ssrane_b23@ee.vjti.ac.in>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Tested-by: syzbot+527a7e48a3d3d315d862@syzkaller.appspotmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
REQ_OP_ZONE_RESET_ALL is a zone management request, and op_is_zone_mgmt()
has returned true for it.
Update the comment to remove the misleading exception note so
the documentation matches the implementation.
Fixes: 12a1c9353c ("block: fix op_is_zone_mgmt() to handle REQ_OP_ZONE_RESET_ALL")
Signed-off-by: shechenglong <shechenglong@xfusion.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit fe0418eb9b ("block: Prevent potential deadlocks in zone write
plug error recovery") added a WARN check in disk_put_zone_wplug() to
verify that when the last reference to a zone write plug is dropped,
this zone write plug does not have the BLK_ZONE_WPLUG_PLUGGED flag set,
that is, that it is not plugged.
However, the function disk_zone_wplug_abort(), which is called for zone
reset and zone finish operations, does not clear this flag after
emptying a zone write plug BIO list. This can result in the
disk_put_zone_wplug() warning to trigger if the user (erroneously as
that is bad pratcice) issues zone reset or zone finish operations while
the target zone still has plugged BIOs.
Modify disk_put_zone_wplug() to clear the BLK_ZONE_WPLUG_PLUGGED flag.
And while at it, also add a lockdep annotation to ensure that this
function is called with the zone write plug spinlock held.
Fixes: fe0418eb9b ("block: Prevent potential deadlocks in zone write plug error recovery")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
- Allow more host caps to be modified through debugfs
- Skip to set the default 200mA SD current limit
MMC host:
- Convert a few more DT bindings to the DT schema
- dw_mmc: Add Shawn Lin as co-maintainer for the dw_mmc drivers
- dw_mmc-rockchip: Add memory clock auto-gating support
- dw_mmc-rockchip: Add support for the RK3506 variant
- meson-mx-sdio: Ignore disabled "mmc-slot" child-nodes
- meson-mx-sdio: Refactoring and general code improvements
- renesas_sdhi: Enable bigger data ports where available
- renesas_sdhi: Manage reset in probe and during system-wide suspend/resume
- sdhci-brcmstb: Add support for the BCM72116 and BCM74371 variants
- sdhci-brcmstb: Save/restore registers during system-wide suspend/resume
- sdhci-msm: Add support for the sm8750 and the Kaanapali variants
- sdhci-msm: Avoid early clock doubling during HS400 transition
- sdhci-of-dwcmshc: Add command queue support for Rockchip SOCs
- sdhci-of-dwcmshc: Add support for the Eswin EIC7700 variant
-----BEGIN PGP SIGNATURE-----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=Gf5H
-----END PGP SIGNATURE-----
Merge tag 'mmc-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC updates from Ulf Hansson:
"MMC core:
- Allow more host caps to be modified through debugfs
- Skip to set the default 200mA SD current limit
MMC host:
- Convert a few more DT bindings to the DT schema
- dw_mmc: Add Shawn Lin as co-maintainer for the dw_mmc drivers
- dw_mmc-rockchip:
- Add memory clock auto-gating support
- Add support for the RK3506 variant
- meson-mx-sdio:
- Ignore disabled "mmc-slot" child-nodes
- Refactoring and general code improvements
- renesas_sdhi:
- Enable bigger data ports where available
- Manage reset in probe and during system-wide suspend/resume
- sdhci-brcmstb:
- Add support for the BCM72116 and BCM74371 variants
- Save/restore registers during system-wide suspend/resume
- sdhci-msm:
- Add support for the sm8750 and the Kaanapali variants
- Avoid early clock doubling during HS400 transition
- sdhci-of-dwcmshc:
- Add command queue support for Rockchip SOCs
- Add support for the Eswin EIC7700 variant"
* tag 'mmc-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (40 commits)
mmc: sdhci-of-dwcmshc: reduce CIT for better performance
mmc: sdhci-of-dwcmshc: Disable internal clock auto gate for Rockchip SOCs
mmc: sdhci-msm: Avoid early clock doubling during HS400 transition
MAINTAINERS: Add Shawn Lin as co-maintainer for dw_mmc drivers
mmc: sdhci-of-dwcmshc: Fix command queue support for RK3576
mmc: renesas_sdhi: Add suspend/resume hooks
mmc: renesas_sdhi: Switch to SYSTEM_SLEEP_PM_OPS()/RUNTIME_PM_OPS() and pm_ptr()
mmc: renesas_sdhi: Deassert the reset signal on probe
dt-bindings: mmc: am654: Simplify dma-coherent property
mmc: meson-mx-sdio: Ignore disabled "mmc-slot" child-nodes
mmc: meson-mx-sdio: Fix indentation in meson_mx_mmc_irq_thread()
mmc: meson-mx-sdio: Use dev_err_probe() where appropriate
mmc: meson-mx-sdio: Use devm_mmc_alloc_host() helper
mmc: meson-mx-sdio: Refactor internal clock initialization
mmc: meson-mx-sdio: Use devm_clk_get_enabled()
mmc: meson-mx-sdio: Switch to regmap for register access
mmc: core: add WQ_PERCPU to alloc_workqueue users
mmc: dw_mmc-rockchip: Add memory clock auto-gating support
mmc: omap: add WQ_PERCPU to alloc_workqueue users
mmc: mtk-sd: replace use of system_wq with system_percpu_wq
...
- Allow power-off for out-of-band wakeup-capable devices
- Drop the redundant call to dev_pm_domain_detach() for the amba bus
- Extend the genpd governor for CPUs to account for IPIs
pmdomain providers:
- bcm: Add support for BCM2712
- mediatek: Add support for MFlexGraphics power domains
- mediatek: Add support for MT8196 power domains
- qcom: Add RPMh power domain support for Kaanapali
- rockchip: Add support for RV1126B
pmdomain consumers:
- usb: dwc3: Enable out of band wakeup for i.MX95
- usb: chipidea: Enable out of band wakeup for i.MX95
-----BEGIN PGP SIGNATURE-----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=Fkue
-----END PGP SIGNATURE-----
Merge tag 'pmdomain-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain updates from Ulf Hansson:
"pmdomain core:
- Allow power-off for out-of-band wakeup-capable devices
- Drop the redundant call to dev_pm_domain_detach() for the amba bus
- Extend the genpd governor for CPUs to account for IPIs
pmdomain providers:
- bcm: Add support for BCM2712
- mediatek: Add support for MFlexGraphics power domains
- mediatek: Add support for MT8196 power domains
- qcom: Add RPMh power domain support for Kaanapali
- rockchip: Add support for RV1126B
pmdomain consumers:
- usb: dwc3: Enable out of band wakeup for i.MX95
- usb: chipidea: Enable out of band wakeup for i.MX95"
* tag 'pmdomain-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: (26 commits)
pmdomain: Extend the genpd governor for CPUs to account for IPIs
smp: Introduce a helper function to check for pending IPIs
pmdomain: mediatek: convert from clk round_rate() to determine_rate()
amba: bus: Drop dev_pm_domain_detach() call
pmdomain: bcm: bcm2835-power: Prepare to support BCM2712
pmdomain: mediatek: mtk-mfg: select MAILBOX in Kconfig
pmdomain: mediatek: Add support for MFlexGraphics
pmdomain: mediatek: Fix build-errors
cpuidle: psci: Replace deprecated strcpy in psci_idle_init_cpu
pmdomain: rockchip: Add support for RV1126B
pmdomain: mediatek: Add support for MT8196 HFRPSYS power domains
pmdomain: mediatek: Add support for MT8196 SCPSYS power domains
pmdomain: mediatek: Add support for secure HWCCF infra power on
pmdomain: mediatek: Add support for Hardware Voter power domains
pmdomain: qcom: rpmhpd: Add RPMh power domain support for Kaanapali
usb: dwc3: imx8mp: Set out of band wakeup for i.MX95
usb: chipidea: ci_hdrc_imx: Set out of band wakeup for i.MX95
usb: chipidea: core: detach power domain for ci_hdrc platform device
pmdomain: core: Allow power-off for out-of-band wakeup-capable devices
PM: wakeup: Add out-of-band system wakeup support for devices
...
Add new debugfs entry "guc_log_lfd", prepared for output guc log
in LFD(Log Format Descriptors) format.
Signed-off-by: Zhanjun Dong <zhanjun.dong@intel.com>
Reviewed-by: Julia Filipchuk <julia.filipchuk@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patch.msgid.link/20251127170759.2620994-7-zhanjun.dong@intel.com
Add GuC crash dump data empty check. LFD will only include crash dump
section when data is not empty.
Signed-off-by: Zhanjun Dong <zhanjun.dong@intel.com>
Reviewed-by: Julia Filipchuk <julia.filipchuk@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patch.msgid.link/20251127170759.2620994-6-zhanjun.dong@intel.com
Add GuC LFD (Log Format Descriptors) related ABI definitions.
Signed-off-by: Zhanjun Dong <zhanjun.dong@intel.com>
Reviewed-by: Julia Filipchuk <julia.filipchuk@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patch.msgid.link/20251127170759.2620994-3-zhanjun.dong@intel.com
Exec_queue's are only used for OAR/OAC functionality for OAG unit. Make
this requirement explicit, which avoids complications in the code for
other (non-OAG) OA units.
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patch.msgid.link/20251202025115.373546-4-ashutosh.dixit@intel.com
gt_id was previously omitted from 'struct drm_xe_oa_unit' because it could
be determine from hwe's attached to the OA unit. However, we now have OA
units which don't have any hwe's attached to them. Hence add gt_id to
'struct drm_xe_oa_unit' in order to provide this needed information to
userspace.
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patch.msgid.link/20251202025115.373546-3-ashutosh.dixit@intel.com
Use explicit struct initialization for struct xe_oa_regs to reduce chance
of error. Also add .oa_mmio_trg field to struct for completeness.
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patch.msgid.link/20251202025115.373546-2-ashutosh.dixit@intel.com
GPIO core:
- add proper support for shared GPIOs that's aiming to replace the
current sharing mechanism (which provides no synchronization ot enable
counting) and enable it for Qualcomm platforms
- improve the software node GPIO lookup by using the fwnode
representation instead of the software node's name which was prone to
bugs (GPIO controllers don't have to use the software node's name as
their kernel label)
- remove the last user of legacy-of-mm-gpiochip.h and drop the header
- move closer to removing the legacy gpio_request_one() routine
- rename some symbols for consistency
- shrink GPIO printk() helpers by reusing existing code
- remove some redundant kernel messages
- use min() instead of min_t() in GPIO ACPI code
- use system_percpu_wq instead of system_wq in GPIO character device code
New drivers:
- add a driver for the QIXIS FPGA GPIO controller
Driver improvements:
- use modernized variants of power management macros across a wide array
of drivers in order to avoid having to use the __maybe_unused attribute
- convert gpio-elkhartlake and reset-gpio to using the auxiliary bus
instead of the platform bus as they are not really described in
firmware
- use lock guards and update symbol prefixes in gpio-mmio
- support the bryx radio interface kit in gpio-mpsse + refactor the
driver
- use software nodes for configuring the reset-gpio driver, including
setting up the reference to the shared "reset" pin
- check and propagate the return value of gpiod_set_value() to user-space
in gpio-virtuser (this was previously not possible as this function
returned void)
- extend the gpio-regmap helper with more features (bypass cache for
aliased inputs, force writes for aliased data registers, add a new
configuration parameter)
- remove unneeded includes from gpio-aspeed and gpio-latch
- add support for Tegra410 to gpio-tegra186
- replace PCI-specific PM with generic device-level PM in gpio-bt8xx
- use dynamic GPIO range allocation in gpio-loongson-64bit
- improve handling of level-triggered interrupts in gpio-pca953x
- add suspend/resume support to gpio-fxl6408
- add support for more models to gpio-menz127
- optimize gpio-mvebu interrupt handling by avoiding unnecessary calls
to mvebu_gpio_irq_handler()
- make locking more consistent in gpio-grgpio
Device-tree bindings:
- document new NXP and Microchip models
Documentation:
- add a comprehensive compatibility and feature list for gpio-pca953x,
which is a great addition as it's probably the most commonly used GPIO
expander driver
- kernel-doc tweaks
Late fixes:
- use BYTE_CTRL_MODE for 2K2000/3000 models in gpio-loongson
-----BEGIN PGP SIGNATURE-----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=Mw+x
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"There's one new driver, lots of various updates to existing ones, some
refactoring support for new models and misc tweaks and fixes.
The biggest new feature in GPIO core is adding support for managed,
enable-counted sharing of GPIO pins, something that - until now - was
only hacked around with the GPIOD_FLAGS_BIT_NONEXCLUSIVE request flag
which basically allowed drivers to "fight it out" for the descriptor
and provided no synchronization. It was enabled on Qualcomm platforms
(and thus is enabled on arm64 defconfig) and I plan on removing
GPIOD_FLAGS_BIT_NONEXCLUSIVE once all drivers using it are switched to
the new mechanism.
GPIO core:
- add proper support for shared GPIOs that's aiming to replace the
current sharing mechanism (which provides no synchronization ot
enable counting) and enable it for Qualcomm platforms
- improve the software node GPIO lookup by using the fwnode
representation instead of the software node's name which was prone
to bugs (GPIO controllers don't have to use the software node's
name as their kernel label)
- remove the last user of legacy-of-mm-gpiochip.h and drop the header
- move closer to removing the legacy gpio_request_one() routine
- rename some symbols for consistency
- shrink GPIO printk() helpers by reusing existing code
- remove some redundant kernel messages
- use min() instead of min_t() in GPIO ACPI code
- use system_percpu_wq instead of system_wq in GPIO character device
code
New drivers:
- add a driver for the QIXIS FPGA GPIO controller
Driver improvements:
- use modernized variants of power management macros across a wide
array of drivers in order to avoid having to use the __maybe_unused
attribute
- convert gpio-elkhartlake and reset-gpio to using the auxiliary bus
instead of the platform bus as they are not really described in
firmware
- use lock guards and update symbol prefixes in gpio-mmio
- support the bryx radio interface kit in gpio-mpsse + refactor the
driver
- use software nodes for configuring the reset-gpio driver, including
setting up the reference to the shared "reset" pin
- check and propagate the return value of gpiod_set_value() to
user-space in gpio-virtuser (this was previously not possible as
this function returned void)
- extend the gpio-regmap helper with more features (bypass cache for
aliased inputs, force writes for aliased data registers, add a new
configuration parameter)
- remove unneeded includes from gpio-aspeed and gpio-latch
- add support for Tegra410 to gpio-tegra186
- replace PCI-specific PM with generic device-level PM in gpio-bt8xx
- use dynamic GPIO range allocation in gpio-loongson-64bit
- improve handling of level-triggered interrupts in gpio-pca953x
- add suspend/resume support to gpio-fxl6408
- add support for more models to gpio-menz127
- optimize gpio-mvebu interrupt handling by avoiding unnecessary
calls to mvebu_gpio_irq_handler()
- make locking more consistent in gpio-grgpio
Device-tree bindings:
- document new NXP and Microchip models
Documentation:
- add a comprehensive compatibility and feature list for
gpio-pca953x, which is a great addition as it's probably the most
commonly used GPIO expander driver
- kernel-doc tweaks
Late fixes:
- use BYTE_CTRL_MODE for 2K2000/3000 models in gpio-loongson"
* tag 'gpio-updates-for-v6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (80 commits)
gpio: loongson: Switch 2K2000/3000 GPIO to BYTE_CTRL_MODE
gpio: regmap: fix kernel-doc notation
gpio: shared: fix a deadlock
gpio: shared-proxy: set suppress_bind_attrs
gpio: shared: ignore GPIO hogs when traversing the device tree
gpio: shared: ignore special __symbols__ node when traversing device tree
gpio: shared: handle the reset-gpios corner case
gpio: zynq: Use modern PM macros
gpio: xilinx: Use modern PM macros
gpio: xgene: Use modern PM macros
gpio: uniphier: Use modern PM macros
gpio: tqmx86: Use modern PM macros
gpio: pch: Use modern PM macros
gpio: omap: Use modern PM macros
gpio: msc313: Use modern PM macros
gpio: mlxbf2: Use modern PM macros
gpio: ml-ioh: Use modern PM macros
gpio: pl061: Use modern PM macros
gpio: htc-egpio: Use modern PM macros
gpio: brcmstb: Use modern PM macros
...
This release includes two changes for core functions, which affects all
use cases of this subsystem.
- Handle per-device interoperability quirks
It is well known that some devices have quirks affecting
interoperability. To identify such quirks at an early stages of
device detection, the step for reading the configuration ROM contents
has been changed. As a side effect, the entire detection process is
now performed at the basic transaction speed (S100), without no trial
to probe higher supported speeds.
With this change, the following devices should now work with fewer
issues:
- TASCAM FW-1884, FW-1804, and FW-1082
- MOTU Audio Express
- Safer removals of host card
There was a race condition between host card removal and handling of
bus reset events in the workqueue. This appears to be a long standing
issue (for a dozen years or so[1]), and recent changes to use more
workqueues escalate it. To solve it, a new callback has been added to
the 1394 OHCI PCI driver to unregister the interrupt sources and wait
for workqueue completions when removing a card instance.
[1] https://sourceforge.net/p/linux1394/mailman/linux1394-devel/thread/20250629024836.GA16759%40workstation.local/#msg59200628
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQE66IEYNDXNBPeGKSsLtaWM8LwEwUCaS4gGwAKCRCsLtaWM8Lw
E1EhAP48BItL1FUcn1oHGU019iHCE57vTOxPE89LXlinAe7GAAD/WUq77tQ84RUJ
gCuml3cWgRJuDqT6rksDQNNPOFbPbgI=
=B7Xh
-----END PGP SIGNATURE-----
Merge tag 'firewire-updates-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire updates from Takashi Sakamoto:
"This includes two changes for core functions, which affects all use
cases of this subsystem:
- Handle per-device interoperability quirks
Some devices have quirks affecting interoperability. To identify
such quirks at an early stages of device detection, the step for
reading the configuration ROM contents has been changed. As a side
effect, the entire detection process is now performed at the basic
transaction speed (S100), without a trial to probe higher
supported speeds.
With this change, the following devices should now work with fewer
issues:
- TASCAM FW-1884, FW-1804, and FW-1082
- MOTU Audio Express
- Safer removals of host card
There was a race condition between host card removal and handling
of bus reset events in the workqueue. This appears to be a long
standing issue, and recent changes to use more workqueues escalate
it.
To solve it, a new callback has been added to the 1394 OHCI PCI
driver to unregister the interrupt sources and wait for workqueue
completions when removing a card instance"
* tag 'firewire-updates-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: core: abort pending transactions at card removal
firewire: core: add WQ_UNBOUND to alloc_workqueue users
firewire: core: clear sources of hardware interrupt at card removal
firewire: core: code refactoring to find and pop transaction entry
firewire: core: code refactoring to remove transaction entry
firewire: core: use cleanup function to release cached configuration ROM
ALSA: firewire-tascam: reserve resources for transferred isochronous packets at S400
firewire: core: handle device quirk of TASCAM FW-1884/FW-1804/FW-1082
firewire: core: determine transaction speed after detecting quirks
firewire: core: code refactoring to compute transaction speed
firewire: core: handle device quirk of MOTU Audio Express
firewire: core: detect device quirk when reading configuration ROM
* New drivers
- Driver for Apple Silicon SMC
- Driver for TSC1641 I2C power monitor
- Driver for MPS MP9945
- Driver for MAX17616
- Driver for MP2925 and MP2929
* Added support for new devices to existing drivers
- dell-smm: Add Dell G5 5505 to fan control whitelist
- aspeed-g6-pwm-tach: Support for AST2700
- asus-ec-sensors: Support for ROG STRIX X470-I GAMING,
ROG STRIX X870-F GAMING WIFI, ROG STRIX X870E-H GAMING WIFI7,
and Pro WS TRX50-SAGE WIFI
- k10temp: Support for AMD Steam Deck APU ID
- pmbus/isl68137: Support for raa229141
- aht10: Support for dht20
- adt7410: Support for ADT7422
- peci: Support for Intel Emerald Rapids
- nct6775: Support for ASUS ROG STRIX X870E-H GAMING WIFI7
- pmbus/max34440: Support for ADPM12200
- ntc-thermistor: Support for Murata ncp18wm474
* Infrastructure updates
- Utilize subsystem locking in various drivers
- ltc4282, ltc2947: Use the new energy64 attribute
* Bug fixes
- Various drivers: Fixes to avoid TOCTOU, mostly in macro functions
evaluating parameters multiple times, as well as missing locks
- max6697: Fix regmap leak on probe failure
- sy7636a: Fix regulator_enable resource leak on error path
- asus-ec-sensors: Correct Pro WS TRX50-SAGE WIFI entry
* Other changes and improvements
- w83781d, lm78: Drop REALLY_SLOW_IO
- Fix broken datasheet links in various drivers
* Various other minor fixes and improvements
-----BEGIN PGP SIGNATURE-----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=NviP
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"New drivers:
- Apple Silicon SMC
- TSC1641 I2C power monitor
- MPS MP9945
- MAX17616
- MP2925 and MP2929
Added support for new devices to existing drivers:
- dell-smm: Add Dell G5 5505 to fan control whitelist
- aspeed-g6-pwm-tach: Support for AST2700
- asus-ec-sensors: Support for ROG STRIX X470-I GAMING, ROG STRIX
X870-F GAMING WIFI, ROG STRIX X870E-H GAMING WIFI7, and Pro WS
TRX50-SAGE WIFI
- k10temp: Support for AMD Steam Deck APU ID
- pmbus/isl68137: Support for raa229141
- aht10: Support for dht20
- adt7410: Support for ADT7422
- peci: Support for Intel Emerald Rapids
- nct6775: Support for ASUS ROG STRIX X870E-H GAMING WIFI7
- pmbus/max34440: Support for ADPM12200
- ntc-thermistor: Support for Murata ncp18wm474
Infrastructure updates:
- Utilize subsystem locking in various drivers
- ltc4282, ltc2947: Use the new energy64 attribute
Bug fixes:
- Various drivers: Fixes to avoid TOCTOU, mostly in macro functions
evaluating parameters multiple times, as well as missing locks
- max6697: Fix regmap leak on probe failure
- sy7636a: Fix regulator_enable resource leak on error path
- asus-ec-sensors: Correct Pro WS TRX50-SAGE WIFI entry
Other changes and improvements:
- w83781d, lm78: Drop REALLY_SLOW_IO
- Fix broken datasheet links in various drivers
And various other minor fixes and improvements"
* tag 'hwmon-for-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (110 commits)
hwmon: (dell-smm) Add Dell G5 5505 to fan control whitelist
hwmon: (max16065) Use local variable to avoid TOCTOU
hwmon: (w83l786ng) Convert macros to functions to avoid TOCTOU
hwmon: (max6697) fix regmap leak on probe failure
hwmon/w83781d: Drop REALLY_SLOW_IO setting
hwmon/lm78: Drop REALLY_SLOW_IO setting
hwmon: sy7636a: Fix regulator_enable resource leak on error path
hwmon: (adm1026) Convert macros to functions to avoid TOCTOU
hwmon: (adm1029) Add locking to avoid TOCTOU
hwmon: (lm87) Convert macros to functions to avoid TOCTOU
hwmon: (asus-ec-sensors) correct Pro WS TRX50-SAGE WIFI entry
hwmon: (vt8231) Convert macros to functions to avoid TOCTOU
hwmon: (emc2103) Add locking to avoid TOCTOU
hwmon: (aspeed-g6-pwm-tach): Add AST2700 compatible string
dt-bindings: hwmon: Add AST2700 compatible
hwmon: (asus-ec-sensors) add ROG STRIX X470-I GAMING
hwmon: (vt1211) Convert macros to functions to avoid TOCTOU
hwmon: (k10temp) Add AMD Steam Deck APU ID
hwmon: Add Apple Silicon SMC hwmon driver
Documentation/hwmon: Fix broken datasheet links for zl6100
...
The two newly added drivers fail to link on builds without
CONFIG_OF:
x86_64-linux-ld: drivers/pinctrl/pinctrl-pic64gx-gpio2.o: in function `pinconf_generic_dt_node_to_map_all':
pinctrl-pic64gx-gpio2.c:(.text+0xc9): undefined reference to `pinconf_generic_dt_node_to_map'
x86_64-linux-ld: drivers/pinctrl/pinctrl-mpfs-iomux0.o: in function `pinconf_generic_dt_node_to_map_all':
pinctrl-mpfs-iomux0.c:(.text+0xc9): undefined reference to `pinconf_generic_dt_node_to_map'
Add a Kconfig dependencies.
Fixes: 38cf9d6413 ("pinctrl: add pic64gx "gpio2" pinmux driver")
Fixes: 46397274da ("pinctrl: add polarfire soc iomux0 pinmux driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
This function doesn't return anything any more, so the compiler would
notice any bad error handling before any cocci script would.
Signed-off-by: Brian Norris <briannorris@chromium.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Link: https://patch.msgid.link/20251202193129.1411419-3-briannorris@chromium.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
No callers check the return code, and that's a good thing. Doing so
would be racy and unhelpful.
Drop the return code entirely, so we don't make anyone think about its
complexities.
Signed-off-by: Brian Norris <briannorris@chromium.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Link: https://patch.msgid.link/20251202193129.1411419-2-briannorris@chromium.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Apparently this test is the only code that checks the return code from
pm_runtime_barrier(), and it turns out that's for good reason -- it's
inherently racy, and a bad idea. We're going to make
pm_runtime_barrier() return void, so prepare for that by dropping any
return code checks.
This resolves some test failures seen like the following:
[ 34.559694] # pm_runtime_error_test: EXPECTATION FAILED at drivers/base/power/runtime-test.c:177
[ 34.559694] Expected 1 == pm_runtime_barrier(dev), but
[ 34.559694] pm_runtime_barrier(dev) == 0 (0x0)
[ 34.563604] # pm_runtime_error_test: pass:0 fail:1 skip:0 total:1
Reported-by: Guenter Roeck <linux@roeck-us.net>
Closes: https://lore.kernel.org/lkml/93259f2b-7017-4096-a31b-cabbf6152e9b@roeck-us.net/
Signed-off-by: Brian Norris <briannorris@chromium.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Link: https://patch.msgid.link/20251202193129.1411419-1-briannorris@chromium.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Here are the GNSS updates for 6.19-rc1, including:
- add support for claiming and deasserting the safeboot pin found on
recent u-blox receivers
- fix timepulse pin description in the devicetree binding
Included are also some related binding updates.
All have been in linux-next with no reported issues.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQHbPq+cpGvN/peuzMLxc3C7H1lCAUCaS19CQAKCRALxc3C7H1l
CAbaAP9zkCo0ktuYLP6rBQv3Kp2GqQt/K2w+P+A+AUNU4T3c4QD/ZdQEMPqBUX5L
rGktYc/rFqWetfv8iuOEl1xBaOVayAY=
=391d
-----END PGP SIGNATURE-----
Merge tag 'gnss-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/johan/gnss
Pull GNSS updates from Johan Hovold:
- add support for claiming and deasserting the safeboot pin found on
recent u-blox receivers
- fix timepulse pin description in the devicetree binding
... and some related binding updates
* tag 'gnss-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/johan/gnss:
dt-bindings: gnss: fix timepulse description
dt-bindings: gnss: u-blox: use lowercase company name
dt-bindings: gnss: u-blox: use open-drain reset and safeboot in example
gnss: ubx: add support for the safeboot gpio
dt-bindings: gnss: u-blox: add safeboot gpio
This release is almost entirely new drivers, with a couple of small
changes in generic code. The biggest individual update is a rename of
the existing Microchip driver and the addition of a new driver for the
silicon SPI controller in their PolarFire SoCs. The overlap between the
soft IP supported by the current driver and this new one is regrettably
all in the IP and not in the register interface offered to software.
- Add a time offset parameter for offloads, allowing them to be defined
in relation to each other. This is useful for IIO type applcations
where you trigger an operation then read the result after a delay.
- Add a tracepoint for flash exec_ops, bringing the flash support more
in line with the debuggability of vanilla SPI.
- Support for Airoha EN7523, Arduino MCUs, Aspeed AST2700, Microchip
PolarFire SPI controllers, NXP i.MX51 ECSPI target mode, Qualcomm
IPQ5414 and IPQ5332, Renesas RZ/T2H, RZ/V2N and RZ/2NH and SpacemiT K1
QuadSPI.
There's also a small set of ASoC cleanups that I mistakenly applied to
the SPI tree and then put more stuff on top of before it was brought to
my attention, sorry about that.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmkt8qUACgkQJNaLcl1U
h9COSAf/buDi3hXYykhEbSlwl839u1XhCU9d8eJF8GhlWR87JeJCb8ou7RdMOQhE
HFehdoD2d5EcPc169cDp2uis8LovGZIPWuzh3D83eZpOOQTLMaQYBrDVNquBoKOR
WVFPPy9X/kb/IR63vM0b5Xv9K6l3ud4yauIsa0ingl9pZi5m2fB3ZEOx9siYYwAn
4fxv43jESbwdTfx33Yc4CkzctZEKuqI2JgLNe/mJZQsdYhS/nLvmDwiZ69k6b4ac
QSHQkP6i+fQzogcbip2z8dA3IUEhDjNQdBbtzmIot8Qbg7zXJkXpAlx2Wstw7Lt8
vLTUY/EHqKh39zok5GECq6E2R6W41w==
=Uw2/
-----END PGP SIGNATURE-----
Merge tag 'spi-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"This release is almost entirely new drivers, with a couple of small
changes in generic code.
The biggest individual update is a rename of the existing Microchip
driver and the addition of a new driver for the silicon SPI controller
in their PolarFire SoCs. The overlap between the soft IP supported by
the current driver and this new one is regrettably all in the IP and
not in the register interface offered to software.
- Add a time offset parameter for offloads, allowing them to be
defined in relation to each other. This is useful for IIO type
applcations where you trigger an operation then read the result
after a delay.
- Add a tracepoint for flash exec_ops, bringing the flash support
more in line with the debuggability of vanilla SPI.
- Support for Airoha EN7523, Arduino MCUs, Aspeed AST2700, Microchip
PolarFire SPI controllers, NXP i.MX51 ECSPI target mode, Qualcomm
IPQ5414 and IPQ5332, Renesas RZ/T2H, RZ/V2N and RZ/2NH and SpacemiT
K1 QuadSPI.
There's also a small set of ASoC cleanups that I mistakenly applied to
the SPI tree and then put more stuff on top of before it was brought
to my attention, sorry about that"
* tag 'spi-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (80 commits)
spi: microchip-core: Refactor FIFO read and write handlers
spi: ch341: fix out-of-bounds memory access in ch341_transfer_one
spi: microchip-core: Remove unneeded PM related macro
spi: microchip-core: Use SPI_MODE_X_MASK
spi: microchip-core: Utilise temporary variable for struct device
spi: microchip-core: Replace dead code (-ENOMEM error message)
spi: microchip-core: use min() instead of min_t()
spi: dt-bindings: airoha: add compatible for EN7523
spi: airoha-snfi: en7523: workaround flash damaging if UART_TXD was short to GND
spi: dt-bindings: renesas,rzv2h-rspi: Document RZ/V2N SoC support
spi: dt-bindings: renesas,rzv2h-rspi: Document RZ/V2N SoC support
spi: microchip: Enable compile-testing for FPGA SPI controllers
spi: Fix potential uninitialized variable in probe()
spi: rzv2h-rspi: add support for RZ/T2H and RZ/N2H
spi: dt-bindings: renesas,rzv2h-rspi: document RZ/T2H and RZ/N2H
spi: rzv2h-rspi: add support for loopback mode
spi: rzv2h-rspi: add support for variable transfer clock
spi: rzv2h-rspi: add support for using PCLK for transfer clock
spi: rzv2h-rspi: make transfer clock rate finding chip-specific
spi: rzv2h-rspi: avoid recomputing transfer frequency
...
This is a relatively busy release for the regulator API, as well as a
good collection of new drivers we've got a little bit of core work and a
bunch of cleanup throughout the subsystem:
- Support for propagating undervoltage events to child regulators.
- Undo enables done on supplies when setting enabling regulators via
constraints fails.
- Pull in some gpiolib changes adding support for shared GPIOs to
the gpiolib core, using them to replace the open coded variant of this
that we've had in the regulator API for a long time.
- Support for Fitipower FP9931 and JD9330, Mediatek MT6316, MT6363 and
MT6373, NXP PF1550 and Qualcomm PMH01XX and PMCX0102
The PF1550 support was originally going to go via the MFD tree but
Krzysztof's cleanup work overlapped with it so I pulled in Lee's signed
tag with support for the device.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmkt72UACgkQJNaLcl1U
h9Dm2wf+JhjBLxviOozOhSv17wKnCYpApL12vPIHhv3lGu4J9wPiqqe3eB6PrTPo
xkuIb8u68wOveh7uLgr/kprH/YUxofrkCEwZjy57geSanuqIEzVoqU//4NKca9ND
UeoDiTYLx5JQVzlo12tSFhLCvDsFgdnemWFfubRPQGTJA/RElMxrNySf3yUQbYBE
ODpTGbXqt4LnYQTJRvVM8/0KzREpxD0X8fSISKpA3KYBFntMexZcgrs5pqijwfMS
Euxff2UpFzjodmYEusWfKOFeZXmd/cClF26Tol7oaeaurr1pNu1i0nBUprbd/rzL
YTV8QeiftLqER/h2iDX4f8iTmvVhzA==
=9IkF
-----END PGP SIGNATURE-----
Merge tag 'regulator-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"This is a relatively busy release for the regulator API, as well as a
good collection of new drivers we've got a little bit of core work and
a bunch of cleanup throughout the subsystem:
- Support for propagating undervoltage events to child regulators
- Undo enables done on supplies when setting enabling regulators via
constraints fails
- Pull in some gpiolib changes adding support for shared GPIOs to the
gpiolib core, using them to replace the open coded variant of this
that we've had in the regulator API for a long time
- Support for Fitipower FP9931 and JD9330, Mediatek MT6316, MT6363
and MT6373, NXP PF1550 and Qualcomm PMH01XX and PMCX0102
The PF1550 support was originally going to go via the MFD tree but
Krzysztof's cleanup work overlapped with it so I pulled in Lee's
signed tag with support for the device"
* tag 'regulator-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (50 commits)
regulator: fp9931: Fix spelling mistake "failid" -> "failed"
regulator: core: Protect regulator_supply_alias_list with regulator_list_mutex
regulator: pf9453: Constify pointers to 'regulator_desc' wrap struct
regulator: pca9450: Constify pointers to 'regulator_desc' wrap struct
regulator: mt6358: Constify pointers to 'regulator_desc' wrap struct
regulator: bd96801: Constify pointers to 'regulator_desc' wrap struct
regulator: bd718x7: Constify pointers to 'regulator_desc' wrap struct
regulator: bd71828: Constify pointers to 'regulator_desc' wrap struct
regulator: bd71815: Constify pointers to 'regulator_desc' wrap struct
regulator: Use container_of_const() when all types are const
regulator: pca9450: Fix error code in probe()
regulator: qcomm-labibb: replace use of system_wq with system_dfl_wq
regulator: Add FP9931/JD9930 driver
dt-bindings: regulator: Add Fitipower FP9931/JD9930
dt-bindings: vendor-prefixes: Add Fitipower
regulator: make the subsystem aware of shared GPIOs
regulator: renesas-usb-vbus-regulator: Remove unused headers
regulator: pca9450: Add support for setting debounce settings
regulator: dt-bindings: pca9540: add debounce timer configuration
regulator: core: disable supply if enabling main regulator fails
...
Another small update for regmap, we have one new feature plus a little
bit of cleanup:
- Support for sparseness information in the flat cache, allowing users
that really need the performance properties it provides to benefit
from the interface and startup time improvements that sparsness provides
without needing to go all the way to a more fancy data structure.
- Cleanup work from Andy Shevchenko, refactoring the cache interface
in preparation for some future stuff he's working on.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmkt6/0ACgkQJNaLcl1U
h9A33gf/QC/O/zxVtpq31+CtC1k3ola0rWrLxOnQKywoUcBjJqX+FiFqL+MDS6Mw
RfXzX7SmzJup71/sg7GNQjRSL3jH3UmsAy4acbNhoCXwi0VaFibHfTqVKNQGK5um
uzsDP8Ue4zUyqym3jMKxs36iVYtt9/QcUjrubumisnB51csQKQ0tn7+2khUbN7D5
PEjUfR7WiGAGDf2AmCLueCYaV16uuzoxnlV9U4Mp5LYvzi5KKxZZAid9ppUCUcAt
uab8Y5Qo8uxBKJEue1vp4shfbxj69GoOdzOP8bYWNP2z6xcHXgK2ma/5y3eqK7L0
uA1SHqKW3QXY1VckI83QWrifR6r8mQ==
=TTeH
-----END PGP SIGNATURE-----
Merge tag 'regmap-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap updates from Mark Brown:
"Another small update for regmap, we have one new feature plus a little
bit of cleanup:
- Support for sparseness information in the flat cache, allowing
users that really need the performance properties it provides to
benefit from the interface and startup time improvements that
sparsness provides without needing to go all the way to a more
fancy data structure
- Cleanup work from Andy Shevchenko, refactoring the cache interface
in preparation for some future stuff he's working on"
* tag 'regmap-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: sdw-mbq: Reorder regmap_mbq_context struct for better packing
regmap: i3c: Use ARRAY_SIZE()
regcache: maple: Split ->populate() from ->init()
regcache: flat: Split ->populate() from ->init()
regcache: flat: Remove unneeded check and error message for -ENOMEM
regcache: rbtree: Split ->populate() from ->init()
regcache: Add ->populate() callback to separate from ->init()
regmap: warn users about uninitialized flat cache
regmap: add flat cache with sparse validity
- We must ignore error -ENOENT from parsers on subpartitions which is a
legitimate return value.
- PM support is added to the intel-dg driver.
Raw NAND changes:
- The major change in this MR will be the support for the Allwinner H616
NAND controller, which lead to numerous changes and cleanups in the
driver.
- Another notable change on this driver is the use of
field_get()/field_prep(), but since the global support for this
helpers is going to be merged in the same release as we start using
these helpers, it implies undefining them in the first place to avoid
warnings. Depending on the merging order (Yuri's bitmap branch or
mtd/next), a temporary warning may arise.
- Marvell drivers layout handling changes have also landed, they fix
previous definitions and abuses that have been made previously, which
implied to relax the ECC parameters validation in the core a bit.
- The Cadence NAND controller driver gets NV-DDR interface support.
SPI NAND changes:
- Support for FudanMicro FM25S01BI3 and ESMT F50L1G41LC is added.
SPI NOR changes:
- Fix SMPT parsing for S25FS-S flash family. They report variable dummy
cycles for reads. This results in the default of 0 being used. This
works for other Infineon chips, but not for the S25FS-S family. They
need 8 dummy cycles. Add fixup hooks to specify that. Also add fixup
hooks to fix incorrect map ID data in SFDP.
- Add support for a bunch of Winbond flashes. Their block protection
information is not discoverable, so they need to have an entry in the
flash tables to describe that.
- Some cleanups for Micron flash support.
- Add support for Micron mt35xu01gbba.
- Some SPI controllers like the Intel one on the PCI bus do not support
the read CR opcode (0x35). Do not use the opcode if the controller
does not support it.
Aside from these main changes, there is the usual load of API updates,
kdoc fixes, potential memory leaks fixes, etc.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAmkq8aMACgkQJWrqGEe9
VoRxNQgAti0loJ+uUcjWwvpGkpC6/g1W1j+qMWdBUiiG8F+la23A8vT/HEAna0sD
H9fl8ZeDZYG4YQR3OWBbOs6b7DHdor6QEd08szM35mgJkDT40qyGka1nnwd1KPjS
4+xRPY0Lyx2V612mB8f6yXhvH5GOpskg5JLS65lzjSbyTb8BMCk6uu87eAVViDuw
Q8dOpN/LgbXp5B1H/23CM6Lvgj+Ok2ETLND7l2jW9yE8SSA04J+7Lth4uNSW4k/J
1ZKcaooPBaj7paPxz/C9f3VyxoLN3+YHMjdvt5rI17bwKfsR8PbdVpvdgIqpv1yn
UG84IfsOHP8JDzUHSyKE+9DNgz4Bew==
=8uoN
-----END PGP SIGNATURE-----
Merge tag 'mtd/for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull mtd updates from Miquel Raynal:
"Core MTD changes:
- We must ignore error -ENOENT from parsers on subpartitions which is
a legitimate return value
- PM support is added to the intel-dg driver
Raw NAND changes:
- The major change in this is the support for the Allwinner H616 NAND
controller, which lead to numerous changes and cleanups in the
driver.
- Another notable change in this driver is the use of field_get() and
field_prep(), but since the global support for this helpers is
going to be merged in the same release as we start using these
helpers, we undefine them in the first place to avoid warnings.
- Marvell drivers layout handling changes have also landed, they fix
previous definitions and abuses that have been made previously,
which implied to relax the ECC parameters validation in the core a
bit.
- The Cadence NAND controller driver gets NV-DDR interface support.
SPI NAND changes:
- Support for FudanMicro FM25S01BI3 and ESMT F50L1G41LC is added.
SPI NOR changes:
- Fix SMPT parsing for S25FS-S flash family. They report variable
dummy cycles for reads. This results in the default of 0 being
used. This works for other Infineon chips, but not for the S25FS-S
family. They need 8 dummy cycles. Add fixup hooks to specify that.
Also add fixup hooks to fix incorrect map ID data in SFDP.
- Add support for a bunch of Winbond flashes. Their block protection
information is not discoverable, so they need to have an entry in
the flash tables to describe that.
- Some cleanups for Micron flash support.
- Add support for Micron mt35xu01gbba.
- Some SPI controllers like the Intel one on the PCI bus do not
support the read CR opcode (0x35). Do not use the opcode if the
controller does not support it.
Aside from these main changes, there is the usual load of API updates,
kdoc fixes, potential memory leaks fixes, etc"
* tag 'mtd/for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (51 commits)
mtd: sm_ftl: Fix typo in comment in sm_read_lba
mtd: sm_ftl: Replace deprecated strncpy with sysfs_emit in sm_attr_show
mtd: lpddr_cmds: fix signed shifts in lpddr_cmds
mtd: docg3: fix kernel-doc warnings
mtd: spinand: add support for FudanMicro FM25S01BI3
mtd: rawnand: renesas: Handle devm_pm_runtime_enable() errors
mtd: nand: realtek-ecc: Fix Kconfig dependencies
mtd: rawnand: sunxi: #undef field_{get,prep}() before local definition
mailmap: update Pratyush Yadav's email address
mtd: spi-nor: core: Check read CR support
mtd: spi-nor: micron-st: add TODO for fixing mt35xu02gcba
mtd: spi-nor: micron-st: add mt35xu01gbba support
mtd: spi-nor: micron-st: use SFDP of mt35xu512aba
mtd: spi-nor: micron-st: move set_octal_dtr to late_init()
mtd: spi-nor: micron-st: rename the die_late_init functions
mtd: spinand: esmt: add support for F50L1G41LC
mtd: rawnand: lpc32xx_slc: Convert to use devm_gpiod_get_optional()
mtd: mtdpart: ignore error -ENOENT from parsers on subpartitions
mtd: maps: pcmciamtd: fix potential memory leak in pcmciamtd_detach()
mtd: spi-nor: spansion: SMPT fixups for S25FS-S
...
If CONFIG_BPF_SYSCALL=y, but CONFIG_BPF_JIT=n:
net/smc/smc_hs_bpf.c: In function ‘bpf_smc_hs_ctrl_init’:
include/linux/bpf.h:2068:50: error: statement with no effect [-Werror=unused-value]
2068 | #define register_bpf_struct_ops(st_ops, type) ({ (void *)(st_ops); 0; })
| ^~~~~~~~~~~~~~~~
net/smc/smc_hs_bpf.c:139:16: note: in expansion of macro ‘register_bpf_struct_ops’
139 | return register_bpf_struct_ops(&bpf_smc_hs_ctrl_ops, smc_hs_ctrl);
| ^~~~~~~~~~~~~~~~~~~~~~~
While this compile error is caused by a bug in <linux/bpf.h>, none of
the code in net/smc/smc_hs_bpf.c becomes effective if CONFIG_BPF_JIT is
not enabled. Hence add a dependency on BPF_JIT.
While at it, add the missing newline at the end of the file.
Fixes: 15f295f556 ("net/smc: bpf: Introduce generic hook for handshake flow")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/988c61e5fea280872d81b3640f1f34d0619cfbbf.1764843951.git.geert@linux-m68k.org
Additional to the usual mix of core cleanups, driver changes, minor
fixes and device tree updates the highlight this cycle is Rust support
for the core and a first Rust driver both provided by Michal Wilczynski.
Michal wrote about these changes on
https://mwilczynski.dev/posts/bringing-rust-to-the-pwm-subsystem/ which
is a nice read.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEP4GsaTp6HlmJrf7Tj4D7WH0S/k4FAmktTeIACgkQj4D7WH0S
/k5iuQf+KXBvcSYimI53UNQsT2e9uZc794w6tpQrauHuDp/szFyiGo6XaM+Hir3I
PS2F/2knI6puRlIyPFIxedlgSzNfpU5mXfNM86CmeuNefWVvOGBTU4lLg3ifEgGD
CU7mbV0HMVLX749CDTbrYxIPmSNnIx8bj5V4YIm78QtR3j2L6iTZIaXeF2Ip2FAI
AhNjkar3jk6apg5rbtSLC8At9OG5/JVgEdTuXCaEjCtnEkPz9Z4VPMOwzxzCK24q
EHPTBpAM+psBBr3KOTSMjAuVqfrx07L47e7597XitzcdGg+zVaOnFZpuWER1/t7+
1EAf8wlcYhi3GnUyXbaBzYq1FfhfEA==
=x9B8
-----END PGP SIGNATURE-----
Merge tag 'pwm/for-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm updates from Uwe Kleine-König:
"In addition to the usual mix of core cleanups, driver changes, minor
fixes and device tree updates the highlight this cycle is Rust support
for the core and a first Rust driver both provided by Michal
Wilczynski.
Michal wrote about these changes on
https://mwilczynski.dev/posts/bringing-rust-to-the-pwm-subsystem/
which is a nice read"
* tag 'pwm/for-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux: (22 commits)
pwm: rzg2l-gpt: Allow checking period_tick cache value only if sibling channel is enabled
pwm: bcm2835: Make sure the channel is enabled after pwm_request()
pwm: mediatek: Make use of struct_size macro
pwm: mediatek: Remove unneeded semicolon
pwm: airoha: Add support for EN7581 SoC
pwm: mediatek: Convert to waveform API
pwm: max7360: Clean MAX7360 code
pwm: Drop unused function pwm_apply_args()
pwm: Use %u to printf unsigned int pwm_chip::npwm and pwm_chip::id
pwm: Simplify printf to emit chip->npwm in $debugfs/pwm
pwm: th1520: Use module_pwm_platform_driver! macro
pwm: th1520: Fix clippy warning for redundant struct field init
pwm: Fix Rust formatting
dt-bindings: pwm: thead: Add T-HEAD TH1520 PWM controller
pwm: Add Rust driver for T-HEAD TH1520 SoC
rust: pwm: Fix broken intra-doc link
rust: pwm: Drop wrapping of PWM polarity and state
rust: pwm: Add module_pwm_platform_driver! macro
rust: pwm: Add complete abstraction layer
rust: pwm: Add Kconfig and basic data structures
...
* Improvements
- Support legacy probe behavior in cros_ec_lightbar and
cros_ec_sensorhub.
* Fixes
- Don't fall back to legacy probe behavior if it isn't a legacy device
in cros_usbpd_notify.
- Fix an UAF after unbinding driver in cros_ec_ishtp.
-----BEGIN PGP SIGNATURE-----
iIkEABYKADEWIQS0yQeDP3cjLyifNRUrxTEGBto89AUCaS0NnhMcdHp1bmdiaUBr
ZXJuZWwub3JnAAoJECvFMQYG2jz069QA/09FZ8htBY63DVoo0IBUiRbsZkeDa7is
F6oGB1iyQh55AQDlyDBKhjs2zdFLoilz23q5o4ufQJcK4M7ieteFzva7Cw==
=LyL1
-----END PGP SIGNATURE-----
Merge tag 'chrome-platform-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform updates from Tzung-Bi Shih:
"Improvements:
- Support legacy probe behavior in cros_ec_lightbar and
cros_ec_sensorhub
Fixes:
- Don't fall back to legacy probe behavior if it isn't a legacy
device in cros_usbpd_notify
- Fix an UAF after unbinding driver in cros_ec_ishtp"
* tag 'chrome-platform-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: sensorhub: Support devices without FIFO_INT_ENABLE
platform/chrome: cros_ec_ishtp: Fix UAF after unbinding driver
platform/chrome: cros_ec_lightbar: Check if ec supports suspend commands
platform/chrome: cros_usbpd_notify: defer probe when parent EC driver isn't ready
The majority of changes at this time were about ASoC with a lot of
code refactoring works. From the functionality POV, there aren't much
to see, but we have a wide range of device-specific fixes and updates.
Here are some highlights:
- Continued ASoC API clean works, spanned over many files
- Added a SoundWire SCDA generic class driver with regmap support
- Enhancements and fixes for Cirrus, Intel, Maxim and Qualcomm.
- Support for ASoC Allwinner A523, Mediatek MT8189, Qualcomm QCM2290,
QRB2210 and SM6115, SpacemiT K1, and TI TAS2568, TAS5802, TAS5806,
TAS5815, TAS5828 and TAS5830
- Usual HD-audio and USB-audio quirks and fixups
- Support for Onkyo SE-300PCIE, TASCAM IF-FW/DM MkII
Some gpiolib changes for shared GPIOs are included along with this PR
for covering ASoC drivers changes.
-----BEGIN PGP SIGNATURE-----
iQJCBAABCAAsFiEEIXTw5fNLNI7mMiVaLtJE4w1nLE8FAmkwQ2UOHHRpd2FpQHN1
c2UuZGUACgkQLtJE4w1nLE8tIRAAjCHdIlMejNTCzGRlhsRSQVD6bo1wASXcjfJ6
COH84akbnA0oT5z7H7JnzTOmfjzxLJpwC8j6IpZ/9CQazanT5IIVE41FZquXZ1JB
RhQVzuGw9Pl4MaYVdFuRqIXjiP+msY1jpbo9/QXQo8D/B41wpmVTgzkFVW2rxPMy
0aBOu4Wpu+11aBpNBy6dXDiKQ5kDqn7zOLoFGgcf5wlFIvOGZJ0Wg/i0kvCjl+ia
xYiP+/F6xKOyTY1c98iqExbKzSSy4ddGFUwrkevm6bWpu8hkXiL1O0zMWOe769x6
0wy0b5zvsbtOQOxbtK5+8gdjJw7ycgDa441hDtsaXBBROYZEV3D6+XZJCfq8Tz8F
+vLH5lfZeLg+59eqt3GOMGlwBfuhH91qzukIYG3q9EQGOkNkZ19ySJnFMLom68Ei
TCfNzh/ggSGXA9qAmfBcPoizgC/j9o+v4kbLRQteuRRWxES1FxqeN9Ba3d5JcHT3
BQpz1bhUli73477D6voPcwXLiQlM+Alv4QUKTFr2nUnWUQKwMvkZFwiv2jTqVdDf
f71Usv7xdyM7XijgmXuLg+3n0UvCwUPBB+bv3a1Bu7G4iTB1deNKU8t9k+sBJpcX
aRs5ych3MiU/zG+KRMB5FEx31KzpKu+Kk9NQ207/1HLaNhTgD3cg2wS3T3qdRUPv
Yf6wFHs=
=1JUI
-----END PGP SIGNATURE-----
Merge tag 'sound-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"The majority of changes at this time were about ASoC with a lot of
code refactoring works. From the functionality POV, there isn't much
to see, but we have a wide range of device-specific fixes and updates.
Here are some highlights:
- Continued ASoC API cleanup work, spanned over many files
- Added a SoundWire SCDA generic class driver with regmap support
- Enhancements and fixes for Cirrus, Intel, Maxim and Qualcomm.
- Support for ASoC Allwinner A523, Mediatek MT8189, Qualcomm QCM2290,
QRB2210 and SM6115, SpacemiT K1, and TI TAS2568, TAS5802, TAS5806,
TAS5815, TAS5828 and TAS5830
- Usual HD-audio and USB-audio quirks and fixups
- Support for Onkyo SE-300PCIE, TASCAM IF-FW/DM MkII
Some gpiolib changes for shared GPIOs are included along with this PR
for covering ASoC drivers changes"
* tag 'sound-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (739 commits)
ALSA: hda/realtek: Add PCI SSIDs to HP ProBook quirks
ALSA: usb-audio: Simplify with usb_endpoint_max_periodic_payload()
ALSA: hda/realtek: fix mute/micmute LEDs don't work for more HP laptops
ALSA: rawmidi: Fix inconsistent indenting warning reported by smatch
ALSA: dice: fix buffer overflow in detect_stream_formats()
ASoC: codecs: Modify awinic amplifier dsp read and write functions
ASoC: SDCA: Fixup some more Kconfig issues
ASoC: cs35l56: Log a message if firmware is missing
ASoC: nau8325: Delete a stray tab
firmware: cs_dsp: Add test cases for client_ops == NULL
firmware: cs_dsp: Don't require client to provide a struct cs_dsp_client_ops
ASoC: fsl_micfil: Set channel range control
ASoC: fsl_micfil: Add default quality for different platforms
ASoC: intel: sof_sdw: Add codec_info for cs42l45
ASoC: sdw_utils: Add cs42l45 support functions
ASoC: intel: sof_sdw: Add ability to have auxiliary devices
ASoC: sdw_utils: Move codec_name to dai info
ASoC: sdw_utils: Add codec_conf for every DAI
ASoC: SDCA: Add terminal type into input/output widget name
ASoC: SDCA: Align mute controls to ALSA expectations
...
Expose color pipeline and add ability to program it.
v2: Set bit to enable multisegmented lut
v3: s/drm_color_lut_32/drm_color_lut32 (Simon)
v4: - Fix dsb programming
- Remove multi-segment LUT, they will be added in later patches
- Add pipeline only to TGL+
- Code Refactor
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patch.msgid.link/20251203085211.3663374-16-uma.shankar@intel.com
Add helpers to program the 3D LUT registers and arm them.
LUT_3D_READY in LUT_3D_CLT is cleared off by the HW once
the LUT buffer is loaded into it's internal working RAM.
So by the time we try to load/commit new values, we expect
it to be cleared off. If not, log an error and return
without writing new values. Do it only when writing with MMIO.
There is no way to read register within DSB execution.
v2:
- Add information regarding LUT_3D_READY to commit message (Jani)
- Log error instead of a drm_warn and return without committing changes
if 3DLUT HW is not ready to accept new values.
- Refactor intel_color_crtc_has_3dlut()
Also remove Gen10 check (Suraj)
v3:
- Addressed review comments (Suraj)
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patch.msgid.link/20251203085211.3663374-15-uma.shankar@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Extract the LUT and program plane post csc registers.
v2: Add DSB support
v3: Add support for single segment 1D LUT
v4:
- s/drm_color_lut_32/drm_color_lut32 (Simon)
- Move declaration to beginning of the function (Suraj)
- Remove multisegmented code, add it later
- Remove dead code for SDR planes, add it later
v5:
- Fix iterator issues
v6: Removed redundant variable (Suraj)
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Link: https://patch.msgid.link/20251203085211.3663374-13-uma.shankar@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Add callback to program Pre-CSC LUT for TGL and beyond
v2: Add DSB support
v3: Add support for single segment 1D LUT color op
v4:
- s/drm_color_lut_32/drm_color_lut32/ (Simon)
- Change commit message (Suraj)
- Improve comments (Suraj)
- Remove multisegmented programming, to be added later
- Remove dead code for SDR planes, add when needed
BSpec: 50411, 50412, 50413, 50414
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Link: https://patch.msgid.link/20251203085211.3663374-12-uma.shankar@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Add framework that will help in loading LUT to Pre/Post CSC color
blocks.
v2: Add dsb support
v3: Align enum names
v4: Propagate change in lut data to crtc_state
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Link: https://patch.msgid.link/20251203085211.3663374-11-uma.shankar@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
