The VM_CONTEXT1_PROTECTION_FAULT_MCCLIENT register
doesn't exist on GMC v6 so we can't print the MC client as a
string like we do on GMC v7-v8. However, we still print the
mc_id from VM_CONTEXT1_PROTECTION_FAULT_STATUS.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We are going to use the soft IRQ handler ring on GMC v8
to process interrupts from VM faults.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We are going to use the soft IRQ handler ring on GMC v8
to process interrupts from VM faults.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We are going to use the soft IRQ handler ring on GMC v8
to process interrupts from VM faults.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We are going to use the soft IRQ handler ring on GMC v7 (CIK)
to process interrupts from VM faults.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We are going to use the soft IRQ handler ring on GMC v6 (SI)
to process interrupts from VM faults.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Implement the missing u64 user access function on ARM when
CONFIG_CPU_SPECTRE=n. This makes it possible to access a 64bit value in
generic code with [unsafe_]get_user(). All other architectures and ARM
variants provide the relevant accessors already.
- Ensure that ASM GOTO jump label usage in the user mode access helpers
always goes through a local C scope label indirection inside the
helpers. This is required because compilers are not supporting that a
ASM GOTO target leaves a auto cleanup scope. GCC silently fails to emit
the cleanup invocation and CLANG fails the build.
This provides generic wrapper macros and the conversion of affected
architecture code to use them.
- Scoped user mode access with auto cleanup
Access to user mode memory can be required in hot code paths, but if it
has to be done with user controlled pointers, the access is shielded
with a speculation barrier, so that the CPU cannot speculate around the
address range check. Those speculation barriers impact performance quite
significantly. This can be avoided by "masking" the provided pointer so
it is guaranteed to be in the valid user memory access range and
otherwise to point to a guaranteed unpopulated address space. This has
to be done without branches so it creates an address dependency for the
access, which the CPU cannot speculate ahead.
This results in repeating and error prone programming patterns:
if (can_do_masked_user_access())
from = masked_user_read_access_begin((from));
else if (!user_read_access_begin(from, sizeof(*from)))
return -EFAULT;
unsafe_get_user(val, from, Efault);
user_read_access_end();
return 0;
Efault:
user_read_access_end();
return -EFAULT;
which can be replaced with scopes and automatic cleanup:
scoped_user_read_access(from, Efault)
unsafe_get_user(val, from, Efault);
return 0;
Efault:
return -EFAULT;
- Convert code which implements the above pattern over to
scope_user.*.access(). This also corrects a couple of imbalanced
masked_*_begin() instances which are harmless on most architectures, but
prevent PowerPC from implementing the masking optimization.
- Add a missing speculation barrier in copy_from_user_iter()
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmksRfITHHRnbHhAbGlu
dXRyb25peC5kZQAKCRCmGPVMDXSYoVhBEACEySjWcyCrD1e0ZFMFAOJZFI2BShav
reotzCzmHYQdpVukDRxc64BgM2vN4yB04xnyMhi2o4hSTiIJhz1NzbKggsQJhVoA
psYz+xEI161HuLZnUBUBuF9RRko/HVsbGqO2JFCuOKor4GCycvjVgupR3EIN9h5T
HZEWGIgaTmN7MBj0QRrJgJkaaSTnPKOwWaNMV/F9pfk27zuB7vuV8WM9P3FaJYG+
JGa9td7VGaBpWavxgMJqfdvXWBCVDDfZ1dunWx8tPTnLxKZZZD6HlfQXhZTr2n1e
rtJpGgfVBx5Uqxn4RrhS0I7QeK1b9rrt3IU7EkFoaa3Z8LU5B7cHlm7KyicyoHhy
SzFFUszssznT/0OhA5fmgPRlqI295HynW2p1L4Xy9hC0EZ2vXJPG5rO6X3x6QwSR
asjRB7x/6JzWQUzE7/nhXd9KcB66wvQxhnjp7GqulF74aPBCtIdXXDD68YEDYkbi
dPC3NRBr0ePbsGVGWbYvYIPWcvo1u814C2io1zKwmVbiN6lCYURgQK861vfAZUP8
oP5D2a6ENgezDKoJo6eJ82inuDu64qZy7OOkU/aO3cbOuWGVyY9CjYD11x85Nr0k
UNabSOfvcmhmobtYUiAgLLrjX1grQUG3F74ZQTw513mwgMObuDAAoS11GPjY6HL6
b99WUJRv8jP66A==
=6no0
-----END PGP SIGNATURE-----
Merge tag 'core-uaccess-2025-11-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scoped user access updates from Thomas Gleixner:
"Scoped user mode access and related changes:
- Implement the missing u64 user access function on ARM when
CONFIG_CPU_SPECTRE=n.
This makes it possible to access a 64bit value in generic code with
[unsafe_]get_user(). All other architectures and ARM variants
provide the relevant accessors already.
- Ensure that ASM GOTO jump label usage in the user mode access
helpers always goes through a local C scope label indirection
inside the helpers.
This is required because compilers are not supporting that a ASM
GOTO target leaves a auto cleanup scope. GCC silently fails to emit
the cleanup invocation and CLANG fails the build.
[ Editor's note: gcc-16 will have fixed the code generation issue
in commit f68fe3ddda4 ("eh: Invoke cleanups/destructors in asm
goto jumps [PR122835]"). But we obviously have to deal with clang
and older versions of gcc, so.. - Linus ]
This provides generic wrapper macros and the conversion of affected
architecture code to use them.
- Scoped user mode access with auto cleanup
Access to user mode memory can be required in hot code paths, but
if it has to be done with user controlled pointers, the access is
shielded with a speculation barrier, so that the CPU cannot
speculate around the address range check. Those speculation
barriers impact performance quite significantly.
This cost can be avoided by "masking" the provided pointer so it is
guaranteed to be in the valid user memory access range and
otherwise to point to a guaranteed unpopulated address space. This
has to be done without branches so it creates an address dependency
for the access, which the CPU cannot speculate ahead.
This results in repeating and error prone programming patterns:
if (can_do_masked_user_access())
from = masked_user_read_access_begin((from));
else if (!user_read_access_begin(from, sizeof(*from)))
return -EFAULT;
unsafe_get_user(val, from, Efault);
user_read_access_end();
return 0;
Efault:
user_read_access_end();
return -EFAULT;
which can be replaced with scopes and automatic cleanup:
scoped_user_read_access(from, Efault)
unsafe_get_user(val, from, Efault);
return 0;
Efault:
return -EFAULT;
- Convert code which implements the above pattern over to
scope_user.*.access(). This also corrects a couple of imbalanced
masked_*_begin() instances which are harmless on most
architectures, but prevent PowerPC from implementing the masking
optimization.
- Add a missing speculation barrier in copy_from_user_iter()"
* tag 'core-uaccess-2025-11-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
lib/strn*,uaccess: Use masked_user_{read/write}_access_begin when required
scm: Convert put_cmsg() to scoped user access
iov_iter: Add missing speculation barrier to copy_from_user_iter()
iov_iter: Convert copy_from_user_iter() to masked user access
select: Convert to scoped user access
x86/futex: Convert to scoped user access
futex: Convert to get/put_user_inline()
uaccess: Provide put/get_user_inline()
uaccess: Provide scoped user access regions
arm64: uaccess: Use unsafe wrappers for ASM GOTO
s390/uaccess: Use unsafe wrappers for ASM GOTO
riscv/uaccess: Use unsafe wrappers for ASM GOTO
powerpc/uaccess: Use unsafe wrappers for ASM GOTO
x86/uaccess: Use unsafe wrappers for ASM GOTO
uaccess: Provide ASM GOTO safe wrappers for unsafe_*_user()
ARM: uaccess: Implement missing __get_user_asm_dword()
Fix a typo in a comment, change "enviroment" to "environment" in
drivers/gpu/drm/amd/display/dc/dml2/display_mode_core_structs.h
Fixes: e6a8a000cf ("drm/amd/display: Rename dml2 to dml2_0 folder")
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Aditya Gollamudi <adigollamudi@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[HOW]
Before enable smart power OLED, we need to call set pipe to let
DMUB get correct ABM config.
Reviewed-by: Robin Chen <robin.chen@amd.com>
Signed-off-by: Ian Chen <ian.chen@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
DVI-A & VGA connectors are applicable to DCE ASICs, so move them to
dce110_hwseq.c to block audio sync on SIGNAL_TYPE_RGB for DCE ASICs.
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Users of ttm entities need to hold the gtt_window_lock before using them
to guarantee proper ordering of jobs.
Cc: stable@vger.kernel.org
Fixes: cb5cc4f573 ("drm/amdgpu: improve debug VRAM access performance using sdma")
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Switch runtime PM code to use scope-based forcewake for consistency with
other parts of the driver.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patch.msgid.link/20251128082212.294592-1-raag.jadav@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
VF migration sends a marker to the GUC before resource fixups begin,
and repeats the marker with the RESFIX_DONE notification. This prevents
the GUC from submitting jobs during double migration events.
To reliably test double migration, a second migration must be triggered
while fixups from the first migration are still in progress. Since fixups
complete quickly, reproducing this scenario is difficult. Introduce
debugfs controls to add delays in the post-fixup phase, creating a
deterministic window for subsequent migrations.
New debugfs entries:
/sys/kernel/debug/dri/BDF/
├── tile0
│ ├─gt0
│ │ ├──vf
│ │ │ ├── resfix_stoppers
resfix_stoppers: Predefined checkpoints that allow the migration process
to pause at specific stages. The stages are given below.
VF_MIGRATION_WAIT_RESFIX_START - BIT(0)
VF_MIGRATION_WAIT_FIXUPS - BIT(1)
VF_MIGRATION_WAIT_RESTART_JOBS - BIT(2)
VF_MIGRATION_WAIT_RESFIX_DONE - BIT(3)
Each state will pause with a 1-second delay per iteration, continuing until
its corresponding bit is cleared.
Signed-off-by: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Tomasz Lis <tomasz.lis@intel.com>
Acked-by: Adam Miszczak <adam.miszczak@linux.intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20251201095011.21453-10-satyanarayana.k.v.p@intel.com
Handle GuC response `XE_GUC_RESPONSE_VF_MIGRATED` as a special case in the
VF post-migration recovery flow. When this error occurs, it indicates that
a new migration was detected while the resource fixup process was still in
progress. Instead of failing immediately, requeue the VF into the recovery
path to allow proper handling of the new migration event.
This improves robustness of VF recovery in SR-IOV environments where
migrations can overlap with resource fixup steps.
Signed-off-by: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Tomasz Lis <tomasz.lis@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20251201095011.21453-9-satyanarayana.k.v.p@intel.com
In scenarios involving double migration, the VF KMD may encounter
situations where it is instructed to re-migrate before having the
opportunity to send RESFIX_DONE for the initial migration. This can occur
when the fix-up for the prior migration is still underway, but the VF KMD
is migrated again.
Consequently, this may lead to the possibility of sending two migration
notifications (i.e., pending fix-up for the first migration and a second
notification for the new migration). Upon receiving the first RES_FIX
notification, the GuC will resume VF submission on the GPU, potentially
resulting in undefined behavior, such as system hangs or crashes.
To avoid this, post migration, a marker is sent to the GUC prior to the
start of resource fixups to indicate start of resource fixups. The same
marker is sent along with RESFIX_DONE notification so that GUC can avoid
submitting jobs to HW in case of double migration.
Signed-off-by: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Tomasz Lis <tomasz.lis@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20251201095011.21453-8-satyanarayana.k.v.p@intel.com
Enable VF migration starting with GuC 70.54.0 (compatibility version
1.27.0) which supports additional VF2GUC_RESFIX_START message required
to handle migration recovery in a more robust way.
Signed-off-by: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Tomasz Lis <tomasz.lis@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20251201095011.21453-7-satyanarayana.k.v.p@intel.com
Tariq Toukan says:
====================
net/mlx5e: Disable egress xdp-redirect in default
This small series disables the egress xdp-redirect feature in default.
It can still be enabled by loading a dummy XDP program.
Patches were previously submitted as part of [1].
This reduces the default number of SQs in each channel from 4 to 3, and
saves resources in device and host memory.
This also improves the latency of channel configuration operations, like
interface up (create channels), interface down (destroy channels), and
channels reconfiguration (create new set, destroy old one).
Perf numbers:
NIC: Connect-X7.
Setup: 248 channels, default mtu and rx/tx ring sizes.
Interface up + down:
Before: 2.246 secs
After: 1.798 secs (-0.448 sec)
Saves ~1.8 msec per channel.
[1]
https://lore.kernel.org/all/1762939749-1165658-1-git-send-email-tariqt@nvidia.com/
====================
Link: https://patch.msgid.link/1764497617-1326331-1-git-send-email-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Save per-channel resources in default, in device and host memory.
As no better API exist, make the XDP-redirect-target SQ available by
loading a dummy XDP program.
This improves the latency of interface up/down operations when feature
is disabled.
Perf numbers:
NIC: Connect-X7.
Setup: 248 channels, default mtu and rx/tx ring sizes.
Interface up + down:
Before: 2.246 secs
After: 1.798 secs (-0.448 sec)
Saves ~1.8 msec per channel.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: William Tu <witu@nvidia.com>
Link: https://patch.msgid.link/1764497617-1326331-3-git-send-email-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The XDP features state might depend of the state of other features, like
HW-LRO / HW-GRO.
In general, move the re-evaluation announcement of the XDP features
(xdp_set_features_flag_locked) into the flow where configuration gets
changed. There's no point in updating them elsewhere.
This is a more appropriate place, as this modifies the announced
features while channels are inactive, which avoids the small interval
between channel activation and the proper setting of the XDP features.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: William Tu <witu@nvidia.com>
Link: https://patch.msgid.link/1764497617-1326331-2-git-send-email-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
- Support for Logitech G Pro X Superlight 2 receiver (Nathan Rossi)
- Fix for retry logic in hidpp_send_message_sync() (Mavroudis Chatzilazaridis)
- Support for new Lighspeed receiver version (Mavroudis Chatzilazaridis)
- Support for Logitech G13 (Leo L. Schwab)
- Backlight support improvement for Logitech G510 (Hans de Goede)
The probe function incorrectly calls pm_runtime_put_autosuspend()
twice in succession at the end of successful probe, dropping two
runtime PM references while only one was acquired earlier with
pm_runtime_get_sync(). This causes a usage count underflow:
cadence-qspi 13010000.spi: Runtime PM usage count underflow!
Remove the first redundant pm_runtime_put_autosuspend() call to
balance the reference count.
Tested on StarFive VisionFive 2 v1.2A board.
Fixes: 30dbc1c8d5 ("spi: cadence-qspi: defer runtime support on socfpga if reset bit is enabled")
Signed-off-by: Ali Tariq <alitariq45892@gmail.com>
Link: https://patch.msgid.link/20251130091251.12120-1-alitariq45892@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Revert commit 6797540c8b ("ASoC: cs-amp-lib: Use __free(kfree) instead
of manual freeing").
Krzysztof Kozlowski pointed out that __free() can be dangerous.
It can introduce new cleanup bugs. These are more subtle and difficult to
spot than a missing goto in traditional cleanup, because they are triggered
by writing regular idiomatic C code instead of using C++ conventions. As
it's regular C style it's more likely to be missed because the code is as
would be expected for C. The traditional goto also more obviously flags
to anyone changing the code in the future that they must be careful about
the cleanup.
We can just revert the change. There was nothing wrong with the original
code and as Krzysztof noted: "it does not make the code simpler."
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 6797540c8b ("ASoC: cs-amp-lib: Use __free(kfree) instead of manual freeing")
Link: https://patch.msgid.link/20251201111429.43517-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The component match entry release function will drop the references
taken while looking up the soundwire OF nodes when the platform device
is unbound.
Drop the additional references taken to avoid leaking them on probe
failure (e.g. probe deferral) and on driver unbind.
Fixes: 10f514bd17 ("ASoC: codecs: Add WCD939x Codec driver")
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20251201093419.24474-4-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The component match entry release function will drop the references
taken while looking up the soundwire OF nodes when the platform device
is unbound.
Drop the additional references taken to avoid leaking them on probe
failure (e.g. probe deferral) and on driver unbind.
Fixes: 8d78602aa8 ("ASoC: codecs: wcd938x: add basic driver")
Cc: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20251201093419.24474-3-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The component match entry release function will drop the references
taken while looking up the soundwire OF nodes when the platform device
is unbound.
Drop the additional references taken to avoid leaking them on probe
failure (e.g. probe deferral) and on driver unbind.
Fixes: 9be3ec196d ("ASoC: codecs: wcd937x: add wcd937x codec driver")
Cc: Prasad Kumpatla <prasad.kumpatla@oss.qualcomm.com>
Cc: Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20251201093419.24474-2-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add tests that trigger packet drops in cake_enqueue(): "CAKE with QFQ
Parent - CAKE enqueue with packets dropping". It forces CAKE_enqueue to
return NET_XMIT_CN after dropping the packets when it has a QFQ parent.
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Reviewed-by: Toke Høiland-Jørgensen <toke@toke.dk>
Link: https://patch.msgid.link/20251128001415.377823-3-xmei5@asu.edu
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In cake_drop(), qdisc_tree_reduce_backlog() is used to update the qlen
and backlog of the qdisc hierarchy. Its caller, cake_enqueue(), assumes
that the parent qdisc will enqueue the current packet. However, this
assumption breaks when cake_enqueue() returns NET_XMIT_CN: the parent
qdisc stops enqueuing current packet, leaving the tree qlen/backlog
accounting inconsistent. This mismatch can lead to a NULL dereference
(e.g., when the parent Qdisc is qfq_qdisc).
This patch computes the qlen/backlog delta in a more robust way by
observing the difference before and after the series of cake_drop()
calls, and then compensates the qdisc tree accounting if cake_enqueue()
returns NET_XMIT_CN.
To ensure correct compensation when ACK thinning is enabled, a new
variable is introduced to keep qlen unchanged.
Fixes: 15de71d06a ("net/sched: Make cake_enqueue return NET_XMIT_CN when past buffer_limit")
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Reviewed-by: Toke Høiland-Jørgensen <toke@toke.dk>
Link: https://patch.msgid.link/20251128001415.377823-1-xmei5@asu.edu
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
gup_pgd_range() is invoked with disabled interrupts and invokes
__kmap_local_page_prot() via pte_offset_map(), gup_p4d_range().
With HIGHPTE enabled, __kmap_local_page_prot() invokes kmap_high_get()
which uses a spinlock_t via lock_kmap_any(). This leads to an
sleeping-while-atomic error on PREEMPT_RT because spinlock_t becomes a
sleeping lock and must not be acquired in atomic context.
The loop in map_new_virtual() uses wait_queue_head_t for wake up which
also is using a spinlock_t.
Since HIGHPTE is rarely needed at all, turn it off for PREEMPT_RT
to allow the use of get_user_pages_fast().
[arnd: rework patch to turn off HIGHPTE instead of HAVE_PAST_GUP]
Co-developed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
jump-labels are used to efficiently switch between two possible code
paths. To achieve this, stop_machine() is used to keep the CPU in a
known state while the opcode is modified. The usage of stop_machine()
here leads to large latency spikes which can be observed on PREEMPT_RT.
Jump labels may change the target during runtime and are not restricted
to debug or "configuration/ setup" part of a PREEMPT_RT system where
high latencies could be defined as acceptable.
On 64-bit Arm, it is possible to use jump labels without the
stop_machine() call, which architecturally provides a way to atomically
change one 32-bit instruction word while keeping maintaining consistency,
but this is not generally the case on 32-bit, in particular in thumb2
mode.
Disable jump-label support on a PREEMPT_RT system when SMP is enabled.
[bigeasy: Patch description.]
[arnd: add !SMP case, extend changelog]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Include <linux/fb.h> and <linux/of.h> to avoid dependency on backlight
header to include them. Declares of_machine_is_compatible() and defines
FB_BACKLIGHT_MAX.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 243ce64b2b ("backlight: Do not include <linux/fb.h> in header file")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reviewed-by: Daniel Thompson (RISCstar) <danielt@kernel.org>
Closes: https://lore.kernel.org/linuxppc-dev/CA+G9fYs8fn5URQx2+s2oNxdUgZkSrdLC0P1tNBW_n-6BaBkK2Q@mail.gmail.com/
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Include <linux/of.h> to avoid dependency on backlight header to include
it. Declares of_find_node_by_name(), of_property_match_string() and
of_node_put().
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 243ce64b2b ("backlight: Do not include <linux/fb.h> in header file")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reviewed-by: Daniel Thompson (RISCstar) <danielt@kernel.org>
Closes: https://lore.kernel.org/linuxppc-dev/CA+G9fYs8fn5URQx2+s2oNxdUgZkSrdLC0P1tNBW_n-6BaBkK2Q@mail.gmail.com/
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
There's two patterns of taking the RCU read-lock and the
sig->stats_lock read-seqlock in do_task_stat() and
do_io_accounting(), with a different ordering:
# do_io_accounting():
guard(rcu)();
scoped_seqlock_read (&sig->stats_lock, ss_lock_irqsave) {
# do_task_stat():
scoped_seqlock_read (&sig->stats_lock, ss_lock_irqsave) {
...
rcu_read_lock();
The ordering is RCU-read+seqlock_read in the first
case, seqlock_read+RCU-read in the second case.
While technically these read locks can be taken in any order,
nevertheless it's good practice to use the more intrusive lock
on the inside (which is the IRQs-off section in this case),
and reduces head-scratching during review when done consistently,
so let's use the do_io_accounting() pattern in do_task_stat().
This will also reduce irqs-off latencies in do_task_stat() a tiny bit.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Link: https://patch.msgid.link/aS6rwnaPbHFCdHp1@gmail.com
Commit 9b8b84879d ("block: Increase BLK_DEF_MAX_SECTORS_CAP") increased
the default max_sectors_kb from 1280 KiB to 4096 KiB.
DELLBOSS VD with FW rev MV.R00-0 times out when sending I/Os of size
4096 KiB.
Enable ATA_QUIRK_MAX_SEC, with value 8191 (sectors) for this device,
since any I/O with more sectors than that lead to I/O timeouts.
With this, the DELLBOSS VD SATA controller is usable again.
Cc: stable+noautosel@kernel.org # depends on Move quirk flags to their own enum
Fixes: 9b8b84879d ("block: Increase BLK_DEF_MAX_SECTORS_CAP")
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
The anonymous enum in include/linux/libata.h that is used to store
various global constants can currently be backed by type int.
(It contains both negative and positive constants.)
__ATA_QUIRK_MAX is currently 31.
The quirk flags in the various global constants enum are defined as
"1U << quirk_flag_bit".
Thus if we simply add an additional quirk, the quirk flag will be 1 << 31,
which is a value that is too large to be represented by a signed int.
The various global constants enum will thus therefore be backed by type
long.
This will lead to error prints like e.g.:
ata_port_err(ap, "EH pending after %d tries, giving up\n",
ATA_EH_MAX_TRIES);
now failing to build, with build error:
error: format ‘%d’ expects argument of type ‘int’, but argument 4 has type ‘long int’ [-Werror=format=]
This is because all constants in the various global constants enum now
has to be printed as a long, as that is now the backing type of the enum.
Since the compiler will use the smallest possible backing type for an
enum, it is good practice to not mix unrelated things in a single enum.
Move the quirk flags to a separate enum, so that we don't need to change
the printf specifier for all other constants in the "various global
constants" enum when adding an additional quirk.
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Add intel_bo_key_check() next to intel_bo_is_protected() where it feels
like it belongs, and drop the extra pxp compat header.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/20251201172730.2154668-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Runqueues are currently almost everywhere being read unlocked in
drm/sched. At XDC 2025, the assembled developers were unsure whether
that's legal and whether it can be fixed. Someone should find out.
Add a todo entry for the unlocked runqueue reader problem.
Acked-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://patch.msgid.link/20251107135701.244659-4-phasta@kernel.org
The GPU scheduler has a great many problems and deserves its own TODO
section.
Add a section and a first task describing the problem of
drm_sched_resubmit_jobs() being deprecated without a successor.
Acked-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://patch.msgid.link/20251107135701.244659-3-phasta@kernel.org
Commit 965930962a ("drm/i915/frontbuffer: Fix intel_frontbuffer
lifetime handling") dropped the last xe display users of the
headers. They're still used in intel_overlay.c, but it's not built as
part of xe.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/20251201171050.2145833-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
There are no implementations of fb_debug_enter and fb_debug_leave.
Remove the callbacks from struct fb_ops and clean up the caller.
The field save_graphics in fbcon_par is also no longer required.
Remove it as well.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Acked-by: Daniel Thompson (RISCstar) <danielt@kernel.org>
Link: https://patch.msgid.link/20251125130634.1080966-6-tzimmermann@suse.de
Remove the debug_enter/debug_leave helpers, as there are no DRM
drivers supporting debugging with kgdb. Remove code to keep track
of existing fbdev-emulation state. None of this required any longer.
Also remove mode_set_base_atomic from struct drm_crtc_helper_funcs,
which has no callers or implementations.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Acked-by: Daniel Thompson (RISCstar) <danielt@kernel.org>
Link: https://patch.msgid.link/20251125130634.1080966-5-tzimmermann@suse.de
