Replace open-coded getting root OF node, matching against it and getting
the match data with two new helpers: of_machine_get_match_data() and
of_machine_device_match().
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20251112-b4-of-match-matchine-data-v2-2-d46b72003fd6@linaro.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Several drivers duplicate same code for getting reference to the root
node, matching it against 'struct of_device_id' table and getting out
the match data from the table entry.
There is a of_machine_compatible_match() wrapper but it takes array of
strings, which is not suitable for many drivers since they want the
driver data associated with each compatible.
Add two wrappers, similar to existing of_device_get_match_data():
1. of_machine_device_match() doing only matching against 'struct
of_device_id' and returning bool.
2. of_machine_get_match_data() doing the matching and returning
associated driver data for found compatible.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20251112-b4-of-match-matchine-data-v2-1-d46b72003fd6@linaro.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
The fix commit converted several IPv4 address attributes from binary
to u32, but forgot to specify byte-order: big-endian. Without this,
YNL tools display IPv4 addresses incorrectly due to host-endian
interpretation.
Add the missing byte-order: big-endian to all affected u32 IPv4
address fields to ensure correct parsing and display.
Fixes: 1064d521d1 ("netlink: specs: support ipv4-or-v6 for dual-stack fields")
Reported-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Link: https://patch.msgid.link/20251125112048.37631-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Breno Leitao says:
====================
net: intel: migrate to .get_rx_ring_count() ethtool callback
This series migrates Intel network drivers to use the new .get_rx_ring_count()
ethtool callback introduced in commit 84eaf4359c ("net: ethtool: add
get_rx_ring_count callback to optimize RX ring queries").
The new callback simplifies the .get_rxnfc() implementation by removing
ETHTOOL_GRXRINGS handling and moving it to a dedicated callback. This provides
a cleaner separation of concerns and aligns these drivers with the modern
ethtool API.
The series updates the following Intel drivers:
- idpf
- igb
- igc
- ixgbevf
- fm10k
====================
Link: https://patch.msgid.link/20251125-gxring_intel-v2-0-f55cd022d28b@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 84eaf4359c ("net: ethtool: add get_rx_ring_count callback to
optimize RX ring queries") added specific support for GRXRINGS callback,
simplifying .get_rxnfc.
Remove the handling of GRXRINGS in .get_rxnfc() by moving it to the new
.get_rx_ring_count().
This simplifies the RX ring count retrieval and aligns fm10k with the new
ethtool API for querying RX ring parameters.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Link: https://patch.msgid.link/20251125-gxring_intel-v2-8-f55cd022d28b@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 84eaf4359c ("net: ethtool: add get_rx_ring_count callback to
optimize RX ring queries") added specific support for GRXRINGS callback,
simplifying .get_rxnfc.
Remove the handling of GRXRINGS in .get_rxnfc() by moving it to the new
.get_rx_ring_count().
This simplifies the RX ring count retrieval and aligns ixgbevf with the new
ethtool API for querying RX ring parameters.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Link: https://patch.msgid.link/20251125-gxring_intel-v2-7-f55cd022d28b@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 84eaf4359c ("net: ethtool: add get_rx_ring_count callback to
optimize RX ring queries") added specific support for GRXRINGS callback,
simplifying .get_rxnfc.
Remove the handling of GRXRINGS in .get_rxnfc() by moving it to the new
.get_rx_ring_count().
This simplifies the RX ring count retrieval and aligns igc with the new
ethtool API for querying RX ring parameters.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Link: https://patch.msgid.link/20251125-gxring_intel-v2-6-f55cd022d28b@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 84eaf4359c ("net: ethtool: add get_rx_ring_count callback to
optimize RX ring queries") added specific support for GRXRINGS callback,
simplifying .get_rxnfc.
Remove the handling of GRXRINGS in .get_rxnfc() by moving it to the new
.get_rx_ring_count().
This simplifies the RX ring count retrieval and aligns igb with the new
ethtool API for querying RX ring parameters.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Link: https://patch.msgid.link/20251125-gxring_intel-v2-5-f55cd022d28b@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 84eaf4359c ("net: ethtool: add get_rx_ring_count callback to
optimize RX ring queries") added specific support for GRXRINGS callback,
simplifying .get_rxnfc.
Remove the handling of GRXRINGS in .get_rxnfc() by moving it to the new
.get_rx_ring_count().
This simplifies the RX ring count retrieval and aligns idpf with the new
ethtool API for querying RX ring parameters.
I was not totally convinced I needed to have the lock, but, I decided to
be on the safe side and get the exact same behaviour it was before.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Link: https://patch.msgid.link/20251125-gxring_intel-v2-4-f55cd022d28b@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 84eaf4359c ("net: ethtool: add get_rx_ring_count callback to
optimize RX ring queries") added specific support for GRXRINGS callback,
simplifying .get_rxnfc.
Remove the handling of GRXRINGS in .get_rxnfc() by moving it to the new
.get_rx_ring_count().
This simplifies the RX ring count retrieval and aligns ice with the new
ethtool API for querying RX ring parameters.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Link: https://patch.msgid.link/20251125-gxring_intel-v2-3-f55cd022d28b@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 84eaf4359c ("net: ethtool: add get_rx_ring_count callback to
optimize RX ring queries") added specific support for GRXRINGS callback,
simplifying .get_rxnfc.
Remove the handling of GRXRINGS in .get_rxnfc() by moving it to the new
.get_rx_ring_count().
This simplifies the RX ring count retrieval and aligns iavf with the new
ethtool API for querying RX ring parameters.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Link: https://patch.msgid.link/20251125-gxring_intel-v2-2-f55cd022d28b@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 84eaf4359c ("net: ethtool: add get_rx_ring_count callback to
optimize RX ring queries") added specific support for GRXRINGS callback,
simplifying .get_rxnfc.
Remove the handling of GRXRINGS in .get_rxnfc() by moving it to the new
.get_rx_ring_count().
This simplifies the RX ring count retrieval and aligns i40e with the new
ethtool API for querying RX ring parameters.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Link: https://patch.msgid.link/20251125-gxring_intel-v2-1-f55cd022d28b@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Yao Zi says:
====================
Unify platform suspend/resume routines for PCI DWMAC glue
There are currently three PCI-based DWMAC glue drivers in tree,
stmmac_pci.c, dwmac-intel.c, and dwmac-loongson.c. Both stmmac_pci.c and
dwmac-intel.c implements the same and duplicated platform suspend/resume
routines.
This series introduces a new PCI helper library, stmmac_libpci.c,
providing a pair of helpers, stmmac_pci_plat_{suspend,resume}, and
replaces the driver-specific implementation with the helpers to reduce
code duplication. The helper will also simplify the Motorcomm DWMAC glue
driver which I'm working on.
The glue driver for Intel controllers isn't covered by the series, since
its suspend routine doesn't call pci_disable_device() and thus is a
little different from the new generic helpers.
I only have Loongson hardware on hand, thus the series is only tested on
Loongson 3A5000 machine. I could confirm the controller works after
resume, and WoL works as expected. This shouldn't break stmmac_pci.c,
either, since the new helpers have the exactly same code as the old
driver-specific suspend/resume hooks.
====================
Link: https://patch.msgid.link/20251124160417.51514-1-ziyao@disroot.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert STMMAC PCI glue driver to use the generic platform
suspend/resume routines for PCI controllers, instead of implementing its
own one.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Yanteng Si <siyanteng@cqsoftware.com.cn>
Link: https://patch.msgid.link/20251124160417.51514-4-ziyao@disroot.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert glue driver for Loongson DWMAC controller to use the generic
platform suspend/resume routines for PCI controllers, instead of
implementing its own one.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Acked-by: Yanteng Si <siyanteng@cqsoftware.com.cn>
Link: https://patch.msgid.link/20251124160417.51514-3-ziyao@disroot.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Most glue driver for PCI-based DWMAC controllers utilize similar
platform suspend/resume routines. Add a generic implementation to reduce
duplicated code.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Yanteng Si <siyanteng@cqsoftware.com.cn>
Link: https://patch.msgid.link/20251124160417.51514-2-ziyao@disroot.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Correct it since M.2 device T99W640 has updated from T99W515.
We need to align it with MHI side otherwise this modem can't
get the network.
Fixes: ae5a342643 ("bus: mhi: host: pci_generic: Fix the modem name of Foxconn T99W640")
Signed-off-by: Slark Xiao <slark_xiao@163.com>
Reviewed-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Link: https://patch.msgid.link/20251125070900.33324-1-slark_xiao@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vadim Fedorenko says:
====================
add hwtstamp_get callback to phy drivers
PHY drivers are able to configure HW time stamping and are not able to
report configuration back to user space. Add callback to report
configuration like it's done for net_device and add implementation to
the drivers.
====================
Link: https://patch.msgid.link/20251124181151.277256-1-vadim.fedorenko@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The driver partially stores HW timestamping configuration, but missing
pieces can be read from HW. Add callback to report configuration.
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20251124181151.277256-8-vadim.fedorenko@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The driver stores HW timestamping configuration and can technically
report it. Add callback to do it.
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20251124181151.277256-7-vadim.fedorenko@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The driver stores HW configuration and can technically report it.
Add callback to do it.
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20251124181151.277256-6-vadim.fedorenko@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The driver stores configuration of TX timestamping and can technically
report it. Patch RX timestamp configuration storage to be more precise
on reporting and add callback to actually report it.
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20251124181151.277256-5-vadim.fedorenko@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The driver stores configuration information and can technically report
it. Implement hwtstamp_get callback to report the configuration.
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20251124181151.277256-4-vadim.fedorenko@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
PHY devices had lack of hwtstamp_get callback even though most of them
are tracking configuration info. Introduce new call back to
mii_timestamper.
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20251124181151.277256-3-vadim.fedorenko@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
PHY devices has hwtstamp callback which actually performs set operation.
Rename it to better reflect the action.
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20251124181151.277256-2-vadim.fedorenko@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Change do_withdraw() to clear the SDF_JOURNAL_LIVE flag under the log
flush lock. In addition, change __gfs2_trans_begin() to check if the
filesystem is already known to be withdrawn using gfs2_withdrawn().
Then, once we are holding the log flush lock, check if the
SDF_JOURNAL_LIVE flag is still set. This second check ensures that the
filesystem will remain live until the transaction is submitted.
With these changes, it is no longer useful to clear SDF_JOURNAL_LIVE in
gfs2_end_log_write() after calling gfs2_withdraw().
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Previously, when a withdraw occurred, we would wait for another node to
recover our journal. This also meant that frozen filesystem needed to
be thawed because otherwise, other nodes wouldn't be able to recover the
filesystem. With the reversal of commit 601ef0d52e ("gfs2: Force
withdraw to replay journals and wait for it to finish"), we are no
longer waiting for journal recovery during a withdraw, so we no longer
need to thaw frozen filesystems, either. This also fixes a potential
deadlock reported by lockdep when running xfstest generic/108.
In addition, there is nothing left in do_withdraw() that would require
taking sd_freeze_mutex, so don't bother taking that lock there anymore.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Currently, when a gfs2 filesystem is withdrawn, an "offline" uevent is
triggered that invokes gfs2-util's gfs2_withdraw_helper script. The
purpose of this script is to deactivate the filesystem's block device so
that it can be withdrawn immediately, even before all the filesystem's
caches have been discarded. The script provided by gfs2-utils never did
anything useful, and there was no way for it to report back its status
to the kernel.
To fix that, extend the gfs2_withdraw_helper mechanism so that the
script can report one of the following results by writing the
corresponding value into "/sys$DEVPATH/lock_module/withdraw":
0 - The shared block device has been marked inactive. Future write
operations will fail.
1 - The shared block device may still be active and carry out
write operations.
If the "offline" uevent isn't reacted upon within the timeout configured
in /sys$DEVPATH/tune/withdraw_helper_timeout (default 5 seconds), the
event handler is assumed to have failed.
In addition, add an additional "errors=deactivate" mount option.
With these changes, if fatal errors are detected on a gfs2 filesystem
and the filesystem is mounted with the "errors=panic" option, the kernel
will panic immediately. Otherwise, an attempt will be made to
deactivate the underlying block device. If successful, the kernel will
release all cluster-wide locks immediately so that the rest of the
cluster can continue. If unsuccessful, the kernel will either panic
("errors=deactivate"), or it will purge all filesystem I/O before
releasing all cluster-wide locks ("errors=withdraw").
Note that the gfs2_withdraw_helper script still needs to be fixed to
take advantage of these improvements. It could be changed to use a
mechanism like LVM Persistent Reservations. "dmsetup suspend" is not a
suitable mechanism as it infinitely postpones I/O operations, which may
prevent withdraw from completing.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
During a withdraw, we don't want to write out any more data than we have
to, so in do_xmote(), skip the ->go_sync() glock operation. We still
want to keep calling ->go_inval() to discard any cached data or
metadata, whether clean or dirty.
We do still allow glocks to transition into state LM_ST_UNLOCKED. This
has the desired side effect of calling ->go_inval() and invalidating the
glock caches.
Function gfs2_withdraw_glocks() is already used for dequeuing any
left-over waiters. We still want that to happen, but additionally, we
want all glocks to be unlocked.
Finally, we change function do_promote() to refuse any further
promotions.
This commit cleans up the leftovers of commit 86934198ee ("gfs2: Clear
flags when withdraw prevents xmote").
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Rename function gfs2_gl_dq_holders() to gfs2_withdraw_glocks(). This
function will soon be used for more than just dequeuing holders.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
The current withdraw code duplicates the journal recovery code gfs2
already has for dealing with node failures, and it does so poorly. That
code was added because when releasing a lockspace, we didn't have a way
to indicate that the lockspace needs recovery. We now do have this
feature, so the current withdraw code can be removed almost entirely.
This is one of several steps towards that.
Reverts commit 33dbd1e41a ("gfs2: fix infinite loop when checking ail
item count before go_inval").
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
The current withdraw code duplicates the journal recovery code gfs2
already has for dealing with node failures, and it does so poorly. That
code was added because when releasing a lockspace, we didn't have a way
to indicate that the lockspace needs recovery. We now do have this
feature, so the current withdraw code can be removed almost entirely.
This is one of several steps towards that.
Reverts commit a72d2401f5 ("gfs2: Allow some glocks to be used during
withdraw").
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
The current withdraw code duplicates the journal recovery code gfs2
already has for dealing with node failures, and it does so poorly. That
code was added because when releasing a lockspace, we didn't have a way
to indicate that the lockspace needs recovery. We now do have this
feature, so the current withdraw code can be removed almost entirely.
This is one of several steps towards that.
Reverts the rest of d93ae386ef ("gfs2: Check for log write errors
before telling dlm to unlock").
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
The current withdraw code duplicates the journal recovery code gfs2
already has for dealing with node failures, and it does so poorly. That
code was added because when releasing a lockspace, we didn't have a way
to indicate that the lockspace needs recovery. We now do have this
feature, so the current withdraw code can be removed almost entirely.
This is one of several steps towards that.
Reverts commit 865cc3e9cc ("gfs2: fix a deadlock on
withdraw-during-mount").
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
The current withdraw code duplicates the journal recovery code gfs2
already has for dealing with node failures, and it does so poorly. That
code was added because when releasing a lockspace, we didn't have a way
to indicate that the lockspace needs recovery. We now do have this
feature, so the current withdraw code can be removed almost entirely.
This is one of several steps towards that.
Reverts parts of commit 601ef0d52e ("gfs2: Force withdraw to replay
journals and wait for it to finish").
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
The current withdraw code duplicates the journal recovery code gfs2
already has for dealing with node failures, and it does so poorly. That
code was added because when releasing a lockspace, we didn't have a way
to indicate that the lockspace needs recovery. We now do have this
feature, so the current withdraw code can be removed almost entirely.
This is one of several steps towards that.
Reverts parts of commit 601ef0d52e ("gfs2: Force withdraw to replay
journals and wait for it to finish").
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
The current withdraw code duplicates the journal recovery code gfs2
already has for dealing with node failures, and it does so poorly. That
code was added because when releasing a lockspace, we didn't have a way
to indicate that the lockspace needs recovery. We now do have this
feature, so the current withdraw code can be removed almost entirely.
This is one of several steps towards that.
Reverts parts of commit 601ef0d52e ("gfs2: Force withdraw to replay
journals and wait for it to finish").
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
The current withdraw code duplicates the journal recovery code gfs2
already has for dealing with node failures, and it does so poorly. That
code was added because when releasing a lockspace, we didn't have a way
to indicate that the lockspace needs recovery. We now do have this
feature, so the current withdraw code can be removed almost entirely.
This is one of several steps towards that.
Reverts parts of commit 601ef0d52e ("gfs2: Force withdraw to replay
journals and wait for it to finish").
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
The current withdraw code duplicates the journal recovery code gfs2
already has for dealing with node failures, and it does so poorly. That
code was added because when releasing a lockspace, we didn't have a way
to indicate that the lockspace needs recovery. We now do have this
feature, so the current withdraw code can be removed almost entirely.
This is one of several steps towards that.
Reverts parts of commit 601ef0d52e ("gfs2: Force withdraw to replay
journals and wait for it to finish").
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
The current withdraw code duplicates the journal recovery code gfs2
already has for dealing with node failures, and it does so poorly. That
code was added because when releasing a lockspace, we didn't have a way
to indicate that the lockspace needs recovery. We now do have this
feature, so the current withdraw code can be removed almost entirely.
This is one of several steps towards that.
Reverts parts of commit 601ef0d52e ("gfs2: Force withdraw to replay
journals and wait for it to finish").
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
The current withdraw code duplicates the journal recovery code gfs2
already has for dealing with node failures, and it does so poorly. That
code was added because when releasing a lockspace, we didn't have a way
to indicate that the lockspace needs recovery. We now do have this
feature, so the current withdraw code can be removed almost entirely.
This is one of several steps towards that.
The withdrawing node has no role in recovering from the withdraw
anymore, so it also no longer needs to read metadata blocks after a
withdraw.
We now only need to set a single bit in gfs2_withdraw(), so switch from
try_cmpxchg() to test_and_set_bit().
Reverts commit 8cc67f704f ("gfs2: don't stop reads while withdraw in
progress").
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
GFS sets the LM_FLAG_NOEXP flag on locking requests it makes during
journal recovery, so rename the flag to LM_FLAG_RECOVER for improved
code readability.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
All callers of gfs2_io_error_bh() call gfs2_withdraw() as well, so
change gfs2_io_error_bh() to call gfs2_withdraw() directly. This also
brings it in line with other similar error reporting functions.
With that, gfs2_io_error_bh() is the same as gfs2_io_error_bh_wd(), so
remove the latter.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Now that gfs2_withdraw() is asynchronous, immediately withdraw when
a log write error is detected.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
With delayed withdraws and the SDF_WITHDRAWING flag gone, we can now
rename gfs2_withdrawing_or_withdrawn() back to gfs2_withdrawn().
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Now that gfs2_withdraw() is asynchronous, is can be called in any
context and there is no more need for gfs2_withdraw_delayed() or for
turning delayed withdraws into actual withdraws. Remove the
now-obsolete code.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
So far, withdraws are carried out in the context of the calling task.
When another task tries to withdraw while a withdraw is already
underway, that task blocks as well. Change that to carry out withdraws
asynchronously in workqueue context and don't block the task triggering
the withdraw anymore.
Fixes: syzbot+6b156e132970e550194c@syzkaller.appspotmail.com
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
