Preinitialize the return value, and break out the for loop in
module_finalize() in case of an error to get rid of an ifdef.
This makes it easier to add additional code, which may also depend
on config options.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The KMSG_COMPONENT macro is a leftover of the s390 specific "kernel
message catalog" which never made it upstream.
Remove the macro in order to get rid of a pointless indirection. Replace
all users with the string it defines. In almost all cases this leads to a
simple replacement like this:
- #define KMSG_COMPONENT "appldata"
- #define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
+ #define pr_fmt(fmt) "appldata: " fmt
Except for some special cases this is just mechanical/scripted work.
Acked-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Since the rework of the kernel virtual address space [1] the module area
and the kernel image are within the same 4GB area. Therefore there is no
need for the weak per cpu workaround for modules anymore. Remove it.
[1] commit c98d2ecae0 ("s390/mm: Uncouple physical vs virtual address spaces")
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Harald Freudenberger says:
====================
Support for driver override on AP queues.
Add a new sysfs attribute driver_override the AP queue's directory. Writing
in a string overrides the default driver determination and the drivers are
matched against this string instead. This overrules the driver binding
determined by the apmask/aqmask bitmask fields. With the write to the
attribute a check is done if the queue is in use by an mdev device.
If this is true, the write is aborted and EBUSY is returned.
As there exists some tooling for this kind of driver_override
(see package driverctl) the AP bus behavior for re-binding
should be compatible to this. The steps for a driver_override are:
1) unbind the current driver from the device. For example
echo "17.0005" > /sys/devices/ap/card17/17.0005/driver/unbind
2) set the new driver for this device in the sysfs
driver_override attribute. For example
echo "vfio_ap" > /sys//devices/ap/card17/17.0005/driver_override
3) trigger a bus reprobe of this device. For example
echo "17.0005" > /sys/bus/ap/drivers_probe
With the driverctl package this is more comfortable and
the settings get persisted:
driverctl -b ap set-override 17.0005 vfio_ap
and unset with
driverctl -b ap unset-override 17.0005
====================
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Introduce a restriction for the driver_override feature versus apmask
and aqmask:
- driver_override is only allowed when the apmask and aqmask values
both are default (=0xffff..ffff).
- apmask and aqmask modifications are only allowed when there is no
driver_override on any AP device active.
So in the end the user is restricted to choose to either use
apmask/apmask to divide the AP devices into host owned and vfio owned
or use the driver_override feature but not mix these two approaches.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The mutex ap_perms_mutex was already used not only for protection
of the struct ap_perms ap_perms variable but also for an consistent
update of the AP bus sysfs attributes apmask and aqmask.
So rename this mutex to ap_attr_mutex which better reflects the
current use. This is also a preparation for an upcoming patch which
will use this mutex to lock updates on a new sysfs attribute.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Add a new sysfs attribute driver_override the AP queue's
directory. Writing in a string overrides the default driver
determination and the drivers are matched against this string
instead. This overrules the driver binding determined by the
apmask/aqmask bitmask fields.
According to the common understanding of how the driver_override
behavior shall work, there is no further checking done. Neither about
the string which is given as override driver nor if this device is
currently in use by an mdev device. Another patch may limit this
behavior to refuse a mixed usage of the driver_override and
apmask/aqmask feature.
As there exists some tooling for this kind of driver_override
(see package driverctl) the AP bus behavior for re-binding
should be compatible to this. The steps for a driver_override are:
1) unbind the current driver from the device. For example
echo "17.0005" > /sys/devices/ap/card17/17.0005/driver/unbind
2) set the new driver for this device in the sysfs
driver_override attribute. For example
echo "vfio_ap" > /sys//devices/ap/card17/17.0005/driver_override
3) trigger a bus reprobe of this device. For example
echo "17.0005" > /sys/bus/ap/drivers_probe
With the driverctl package this is more comfortable and
the settings get persisted:
driverctl -b ap set-override 17.0005 vfio_ap
and unset with
driverctl -b ap unset-override 17.0005
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
For the in_use() check of an updated apmask the host's aqmask
was provided to the vfio function. Similar on an update of the
aqmask the host's apmask was provided to the vfio in_use()
function. This led to false results on the check for apmask or
aqmask updates. For example with only one APQN when exactly
this card is tried to be re-assigned back to the host, the
in_use() check did not complain.
The correct behavior is achieved with providing a full mask
for aqmask when an adapter is to be checked and similar a full
mask for aqmask when a domain is to be checked for usage.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Merge the pmdomain fixes for v6.18-rc[n] into the next branch, to allow
them to get tested together with the new changes that are targeted for
v6.19.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Commit 13a4b7fb62 ("pmdomain: core: Leave powered-on genpds on until
late_initcall_sync") kept power-domains on longer during boot which is
causing some GPU related tests to fail on Tegra234. While this is being
investigated, add the flag GENPD_FLAG_NO_STAY_ON for Tegra devices to
restore the previous behaviour to fix this.
Fixes: 13a4b7fb62 ("pmdomain: core: Leave powered-on genpds on until late_initcall_sync")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
- Drop CONFIG_SCTP_COOKIE_HMAC_SHA1=y (removed in commit
2f3dd6ec90 ("sctp: Convert cookie authentication to use
HMAC-SHA256")),
- Drop CONFIG_BATMAN_ADV_NC=y (removed in commit 87b95082db
("batman-adv: remove network coding support")),
- Enable modular build of the SHA-1 secure hash algorithm (no longer
auto-enabled since commit 2f3dd6ec90 ("sctp: Convert cookie
authentication to use HMAC-SHA256")).
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://patch.msgid.link/65e00bcb7b2980278bb087986ee405627aa32d8b.1760360254.git.geert@linux-m68k.org
The partial block length returned by a block-only driver should
not be passed up to the caller since ahash itself deals with the
partial block data.
Set err to zero in ahash_update_finish if it was positive.
Reported-by: T Pratham <t-pratham@ti.com>
Tested-by: T Pratham <t-pratham@ti.com>
Fixes: 9d7a0ab1c7 ("crypto: ahash - Handle partial blocks in API")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Restore the partial block buffer in crypto_ahash_import by copying
it. Check whether the partial block buffer exceeds the maximum
size and return -EOVERFLOW if it does.
Zero the partial block buffer in crypto_ahash_import_core.
Reported-by: T Pratham <t-pratham@ti.com>
Tested-by: T Pratham <t-pratham@ti.com>
Fixes: 9d7a0ab1c7 ("crypto: ahash - Handle partial blocks in API")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
min_t(unsigned int, a, b) casts an 'unsigned long' to 'unsigned int'.
Use min(a, b) instead as it promotes any 'unsigned int' to 'unsigned long'
and so cannot discard significant bits.
In this case the 'unsigned long' value is small enough that the result
is ok.
Detected by an extra check added to min_t().
Signed-off-by: David Laight <david.laight.linux@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
min_t(unsigned int, a, b) casts an 'unsigned long' to 'unsigned int'.
Use min(a, b) instead as it promotes any 'unsigned int' to 'unsigned long'
and so cannot discard significant bits.
In this case the 'unsigned long' value is small enough that the result
is ok.
Detected by an extra check added to min_t().
Signed-off-by: David Laight <david.laight.linux@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
min_t(unsigned int, a, b) casts an 'unsigned long' to 'unsigned int'.
Use min(a, b) instead as it promotes any 'unsigned int' to 'unsigned long'
and so cannot discard significant bits.
In this case the 'unsigned long' value is small enough that the result
is ok.
Detected by an extra check added to min_t().
Signed-off-by: David Laight <david.laight.linux@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The ctx array in struct sdesc is never used. Delete it as it's
bogus since the previous member ends with a flexible array.
Reported-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ever since commit da7f033ddc ("crypto: cryptomgr - Add test
infrastructure"), the DES test suite has tested only one of the four
weak keys and none of the twelve semi-weak keys.
DES has four weak keys and twelve semi-weak keys, and the kernel's DES
implementation correctly detects and rejects all of these keys when the
CRYPTO_TFM_REQ_FORBID_WEAK_KEYS flag is set. However, only a single weak
key was being tested. Add tests for all 16 weak and semi-weak keys.
While DES is deprecated, it is still used in some legacy protocols, and
weak/semi-weak key detection should be tested accordingly.
Tested on arm64 with cryptographic self-tests.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add a check for 1600G_8X link speed when querying PTYS and report it
back correctly when needed.
While at it, adjust mlx5 function which maps the speed rate from IB
spec values to internal driver values to be able to handle speeds
up to 1600Gbps.
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Link: https://patch.msgid.link/20251120-speed-8-v1-2-e6a7efef8cb8@nvidia.com
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Add the new rates as defined in the Infiniband spec for XDR and 8x
link width support.
Furthermore, modify the utility conversion methods accordingly.
Reference: IB Spec Release 1.8
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Link: https://patch.msgid.link/20251120-speed-8-v1-1-e6a7efef8cb8@nvidia.com
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Enabling 5-level paging (LA57) increases TASK_SIZE on x86_64 from 2^47
to 2^56. This affects implicit ODP, which uses TASK_SIZE to calculate
the number of IMR KSM entries.
As a result, the number of entries and the memory usage for KSM mkeys
increase drastically:
- With 2^47 TASK_SIZE: 0x20000 entries (~2MB)
- With 2^56 TASK_SIZE: 0x4000000 entries (~1GB)
This issue could happen previously on systems with LA57 manually
enabled, but now commit 7212b58d6d ("x86/mm/64: Make 5-level paging
support unconditional") enables LA57 by default on all supported
systems. This makes the issue impact widespread.
To mitigate this, increase the size each MTT entry maps from 1GB to 16GB
when 5-level paging is enabled. This reduces the number of KSM entries
and lowers the memory usage on LA57 systems from 1GB to 64MB per IMR.
As now 'mlx5_imr_mtt_size' is larger than 32 bits, we move to use u64
instead of int as part of populate_klm() to prevent overflow of the
'step' variable.
In addition, as populate_klm() actually handles KSM and not KLM, as it's
used only by implicit ODP, we renamed its signature and the internal
structures accordingly while dropping the byte_count handling which is
not relevant in KSM. The page size in KSM is fixed for all the entries
and come from the log_page_size of the mkey.
Note:
On platforms where the calculated value for 'mlx5_imr_ksm_page_shift' is
higher than the max firmware cap to be changed over UMR, or that the
calculated value for 'log_va_pages' is higher than what we may expect,
the implicit ODP cap will be simply turned off.
Co-developed-by: Or Har-Toov <ohartoov@nvidia.com>
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Link: https://patch.msgid.link/20251120-reduce-ksm-v1-1-6864bfc814dc@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
DMA MR doesn't use the unified MR model. So the lkey passed
on to the reg_mr command to FW should contain the correct
lkey. Driver is incorrectly over writing the lkey with pdid
and firmware commands fails due to this.
Avoid passing the wrong key for cases where the unified MR
registration is not used.
Fixes: f786eebbbe ("RDMA/bnxt_re: Avoid an extra hwrm per MR creation")
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/1763624215-10382-2-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Inline size supported by the device is based on the number
of SGEs supported by the adapter. Change the inline
size calculation based on that.
Fixes: de1d364c38 ("RDMA/bnxt_re: Add support for Variable WQE in Genp7 adapters")
Reviewed-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/1763624215-10382-1-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The link state of bond depends on the upper device. Adapt current
link state querying flow and ib_event dispatching flow to report
correct link state of bond.
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20251112093510.3696363-8-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
When conditions are met, schedule a delayed work in bond event handler
to perform bonding operation according to the bond state. In the case
of changing slave number or link state, re-set the netdev for the bond
ibdev after the modification is complete, since these two operations
may not call hns_roce_set_bond_netdev() in hns_roce_init().
The delayed work will be paused when there is a driver reset or exit
to avoid concurrency.
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20251112093510.3696363-7-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Implement hns_roce_slave_init() and hns_roce_slave_uninit() for device
init/uninit in bonding cases. The former is used to initialize a slave
ibdev (when the slave is unlinked from a bond) or a bond ibdev, while
the latter does the opposite. Most of the process is the same as
regular device init/uninit, while some bonding‑specific steps below are
also added.
In bond device init flow, choose one slave to re-initialize as the
main_hr_dev of the bond, and it will be the only device presented for
multiple slaves. During registration, set and active netdev to the
ibdev based on the link state of the slaves. When this main_hr_dev
slave is being unlinked while the bond is still valid, choose a new
slave from the rest and initialize it as the new bond device.
In uninit flow, add a bond cleanup process, restore all the other
slaves and clean up bond resource. This is only for the case where
the port of main_hr_dev is directly removed without unlinking it
from bond.
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20251112093510.3696363-6-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Register netdev notifier for two bonding events NETDEV_CHANGEUPPER
and NETDEV_CHANGELOWERSTATE.
In NETDEV_CHANGEUPPER event handler, check some rules about the HW
constraints when trying to link a new slave to the masteri, and
store some bonding information from the notifier. In unlinking case,
simply check the number of the rest slaves to decide whether the
bond is still supported.
In NETDEV_CHANGELOWERSTATE event handler, not much is done. It
simply sets the bond state when the bond is ready, which will be
used later.
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20251112093510.3696363-4-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Allocate bond_grp resources for each card when the first device in
this card is registered. Block the initialization of VF when its PF
is a bonded slave, as VF is not supported in this case due to HW
constraints.
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20251112093510.3696363-3-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Register and get the basic required resources from bnge driver.
Signed-off-by: Siva Reddy Kallam <siva.kallam@broadcom.com>
Link: https://patch.msgid.link/20251117171136.128193-4-siva.kallam@broadcom.com
Reviewed-by: Usman Ansari <usman.ansari@broadcom.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Add basic Auxiliary interface to the driver which supports
the BCM5770X NIC family.
Signed-off-by: Siva Reddy Kallam <siva.kallam@broadcom.com>
Link: https://patch.msgid.link/20251117171136.128193-3-siva.kallam@broadcom.com
Reviewed-by: Usman Ansari <usman.ansari@broadcom.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The detection of the primary device is skipped incorrectly
if the multiple or flattened feature is enabled.
It also fixes the FSDAX misdetection for non-block extra blobs.
Fixes: c6993c4cb9 ("erofs: Fallback to normal access if DAX is not supported on extra device")
Reported-and-tested-by: syzbot+31b8fb02cb8a25bd5e78@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/r/691af9f6.a70a0220.3124cb.0097.GAE@google.com
Cc: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Most implementations cache the combined result of two-stage translation,
but some, like Andes cores, use split TLBs that store VS-stage and
G-stage entries separately.
On such systems, when a VCPU migrates to another CPU, an additional
HFENCE.VVMA is required to avoid using stale VS-stage entries, which
could otherwise cause guest faults.
Introduce a static key to identify CPUs with split two-stage TLBs.
When enabled, KVM issues an extra HFENCE.VVMA on VCPU migration to
prevent stale VS-stage mappings.
Signed-off-by: Hui Min Mina Chou <minachou@andestech.com>
Signed-off-by: Ben Zong-You Xie <ben717@andestech.com>
Reviewed-by: Radim Krčmář <rkrcmar@ventanamicro.com>
Reviewed-by: Nutty Liu <nutty.liu@hotmail.com>
Link: https://lore.kernel.org/r/20251117084555.157642-1-minachou@andestech.com
Signed-off-by: Anup Patel <anup@brainfault.org>
When executing HLV* instructions at the HS mode, a guest page fault
may occur when a g-stage page table migration between triggering the
virtual instruction exception and executing the HLV* instruction.
This may be a corner case, and one simpler way to handle this is to
re-execute the instruction where the virtual instruction exception
occurred, and the guest page fault will be automatically handled.
Fixes: b91f0e4cb8 ("RISC-V: KVM: Factor-out instruction emulation into separate sources")
Signed-off-by: Fangyu Yu <fangyu.yu@linux.alibaba.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20251121133543.46822-1-fangyu.yu@linux.alibaba.com
Signed-off-by: Anup Patel <anup@brainfault.org>
There is already support of enabling dirty log gradually in small chunks
for x86 in commit 3c9bd4006b ("KVM: x86: enable dirty log gradually in
small chunks") and c862626 ("KVM: arm64: Support enabling dirty log
gradually in small chunks"). This adds support for riscv.
x86 and arm64 writes protect both huge pages and normal pages now, so
riscv protect also protects both huge pages and normal pages.
On a nested virtualization setup (RISC-V KVM running inside a QEMU VM
on an [Intel® Core™ i5-12500H] host), I did some tests with a 2G Linux
VM using different backing page sizes. The time taken for
memory_global_dirty_log_start in the L2 QEMU is listed below:
Page Size Before After Optimization
4K 4490.23ms 31.94ms
2M 48.97ms 45.46ms
1G 28.40ms 30.93ms
Signed-off-by: Quan Zhou <zhouquan@iscas.ac.cn>
Signed-off-by: Dong Yang <dayss1224@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20251103062825.9084-1-dayss1224@gmail.com
Signed-off-by: Anup Patel <anup@brainfault.org>
Currently, we return CSR_HSTATUS as hardware_entry_failure_reason when
kvm_riscv_aia_alloc_hgei failed in KVM_DEV_RISCV_AIA_MODE_HWACCEL
mode, which is vague so it is better to return a well defined value
KVM_EXIT_FAIL_ENTRY_NO_VSFILE provided via uapi/asm/kvm.h.
Signed-off-by: BillXiang <xiangwencheng@lanxincomputing.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20250923053851.32863-1-xiangwencheng@lanxincomputing.com
Signed-off-by: Anup Patel <anup@brainfault.org>
The KVM RISC-V allows SBI MPXY extensions for Guest/VM so add
it to the get-reg-list test.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20251017155925.361560-5-apatel@ventanamicro.com
Signed-off-by: Anup Patel <anup@brainfault.org>
The SBI MPXY extension is a platform-level functionality so KVM only
needs to forward SBI MPXY calls to KVM user-space.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20251017155925.361560-4-apatel@ventanamicro.com
Signed-off-by: Anup Patel <anup@brainfault.org>
Add a separate source vcpu_sbi_forward.c for SBI extensions
which are entirely forwarded to KVM user-space.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20251017155925.361560-3-apatel@ventanamicro.com
Signed-off-by: Anup Patel <anup@brainfault.org>
All uses of kvm_riscv_vcpu_sbi_forward() also updates retdata->uexit so
to further reduce code duplication move retdata->uexit assignment to
kvm_riscv_vcpu_sbi_forward() and convert it into SBI extension handler.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20251017155925.361560-2-apatel@ventanamicro.com
Signed-off-by: Anup Patel <anup@brainfault.org>
