Correct the kernel-doc notation in xhck-mtk.h to avoid most kernel-doc
warnings. Summary of changes:
- don't use /** to begin comments that are not in kernel-doc format
- add missing "struct mu3h_sch_tt" kernel-doc line
- convert several "struct mu3h_...:" to using " - " to separate the
struct name from its short description
- add a missing @speed: struct member description
Warning messages that are fixed:
xhci-mtk.h:25: warning: This comment starts with '/**', but isn't a
kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* To simplify scheduler algorithm, set a upper limit for ESIT,
xhci-mtk.h:25: warning: missing initial short description on line:
* To simplify scheduler algorithm, set a upper limit for ESIT,
Warning: drivers/usb/host/xhci-mtk.h:36 Cannot find identifier on line:
* @fs_bus_bw_out: save bandwidth used by FS/LS OUT eps in each uframes
Warning: drivers/usb/host/xhci-mtk.h:37 Cannot find identifier on line:
* @fs_bus_bw_in: save bandwidth used by FS/LS IN eps in each uframes
Warning: drivers/usb/host/xhci-mtk.h:38 Cannot find identifier on line:
* @ls_bus_bw: save bandwidth used by LS eps in each uframes
Warning: drivers/usb/host/xhci-mtk.h:39 Cannot find identifier on line:
* @fs_frame_bw: save bandwidth used by FS/LS eps in each FS frames
Warning: drivers/usb/host/xhci-mtk.h:40 Cannot find identifier on line:
* @in_ss_cnt: the count of Start-Split for IN eps
Warning: drivers/usb/host/xhci-mtk.h:41 Cannot find identifier on line:
* @ep_list: Endpoints using this TT
Warning: drivers/usb/host/xhci-mtk.h:42 Cannot find identifier on line:
*/
Warning: drivers/usb/host/xhci-mtk.h:43 Cannot find identifier on line:
struct mu3h_sch_tt {
Warning: drivers/usb/host/xhci-mtk.h:44 Cannot find identifier on line:
u16 fs_bus_bw_out[XHCI_MTK_MAX_ESIT];
Warning: drivers/usb/host/xhci-mtk.h:45 Cannot find identifier on line:
u16 fs_bus_bw_in[XHCI_MTK_MAX_ESIT];
Warning: drivers/usb/host/xhci-mtk.h:46 Cannot find identifier on line:
u8 ls_bus_bw[XHCI_MTK_MAX_ESIT];
Warning: drivers/usb/host/xhci-mtk.h:47 Cannot find identifier on line:
u16 fs_frame_bw[XHCI_MTK_FRAMES_CNT];
Warning: drivers/usb/host/xhci-mtk.h:48 Cannot find identifier on line:
u8 in_ss_cnt[XHCI_MTK_MAX_ESIT];
Warning: drivers/usb/host/xhci-mtk.h:49 Cannot find identifier on line:
struct list_head ep_list;
Warning: drivers/usb/host/xhci-mtk.h:50 Cannot find identifier on line:
};
Warning: drivers/usb/host/xhci-mtk.h:51 Cannot find identifier on line:
Warning: drivers/usb/host/xhci-mtk.h:52 Cannot find identifier on line:
/**
Warning: drivers/usb/host/xhci-mtk.h:121 struct member 'speed' not
described in 'mu3h_sch_ep_info'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20251104070216.907540-1-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add device tree binding support for the USB3.2 Gen2 controller on Renesas
RZ/V2H(P) and RZ/V2N SoCs. The USB3.2 IP on these SoCs is identical to
that found on the RZ/G3E SoC.
Add new compatible strings "renesas,r9a09g056-xhci" for RZ/V2N and
"renesas,r9a09g057-xhci" for RZ/V2H(P). Both variants use
"renesas,r9a09g047-xhci" as a fallback compatible to indicate hardware
compatibility with the RZ/G3E implementation.
Update the title to be more generic as it now covers multiple SoC
families beyond just RZ/G3E.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20251101042440.648321-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 69896119dc ("MIPS: vdso: Switch to generic storage
implementation") switches to a generic vdso storage, which increases
the number of data pages from 1 to 4. But there is only one page
reserved, which causes segementation faults depending where the VDSO
area is randomized to. To fix this use the same size of reservation
and allocation of the VDSO data pages.
Fixes: 69896119dc ("MIPS: vdso: Switch to generic storage implementation")
Reviewed-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
In ima_match_rules(), if ima_filter_rule_match() returns -ENOENT due to
the rule being NULL, the function incorrectly skips the 'if (!rc)' check
and sets 'result = true'. The LSM rule is considered a match, causing
extra files to be measured by IMA.
This issue can be reproduced in the following scenario:
After unloading the SELinux policy module via 'semodule -d', if an IMA
measurement is triggered before ima_lsm_rules is updated,
in ima_match_rules(), the first call to ima_filter_rule_match() returns
-ESTALE. This causes the code to enter the 'if (rc == -ESTALE &&
!rule_reinitialized)' block, perform ima_lsm_copy_rule() and retry. In
ima_lsm_copy_rule(), since the SELinux module has been removed, the rule
becomes NULL, and the second call to ima_filter_rule_match() returns
-ENOENT. This bypasses the 'if (!rc)' check and results in a false match.
Call trace:
selinux_audit_rule_match+0x310/0x3b8
security_audit_rule_match+0x60/0xa0
ima_match_rules+0x2e4/0x4a0
ima_match_policy+0x9c/0x1e8
ima_get_action+0x48/0x60
process_measurement+0xf8/0xa98
ima_bprm_check+0x98/0xd8
security_bprm_check+0x5c/0x78
search_binary_handler+0x6c/0x318
exec_binprm+0x58/0x1b8
bprm_execve+0xb8/0x130
do_execveat_common.isra.0+0x1a8/0x258
__arm64_sys_execve+0x48/0x68
invoke_syscall+0x50/0x128
el0_svc_common.constprop.0+0xc8/0xf0
do_el0_svc+0x24/0x38
el0_svc+0x44/0x200
el0t_64_sync_handler+0x100/0x130
el0t_64_sync+0x3c8/0x3d0
Fix this by changing 'if (!rc)' to 'if (rc <= 0)' to ensure that error
codes like -ENOENT do not bypass the check and accidentally result in a
successful match.
Fixes: 4af4662fa4 ("integrity: IMA policy")
Signed-off-by: Zhao Yipeng <zhaoyipeng5@huawei.com>
Reviewed-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Depending on the particular CPU implementation a TLB shutdown may occur
if multiple matching entries are detected upon the execution of a TLBP
or the TLBWI/TLBWR instructions. Given that we don't know what entries
we have been handed we need to be very careful with the initial TLB
setup and avoid all these instructions.
Therefore read all the TLB entries one by one with the TLBR instruction,
bypassing the content addressing logic, and truncate any large pages in
place so as to avoid a case in the second step where an incoming entry
for a large page at a lower address overlaps with a replacement entry
chosen at another index. Then preinitialize the TLB using addresses
outside our usual unique range and avoiding clashes with any entries
received, before making the usual call to local_flush_tlb_all().
This fixes (at least) R4x00 cores if TLBP hits multiple matching TLB
entries (SGI IP22 PROM for examples sets up all TLBs to the same virtual
address).
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Fixes: 35ad7e1815 ("MIPS: mm: tlb-r4k: Uniquify TLB entries on init")
Cc: stable@vger.kernel.org
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com> # Boston I6400, M5150 sim
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Common boolean properties need to be only allowed in the binding
(":true"), because their type is already defined by core DT schema.
Simplify dma-coherent property to match common syntax.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Harini Katakam <harini.katakam@amd.com>
Link: https://patch.msgid.link/20251115122120.35315-5-krzk@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Set the edma tcd transfer attribution settings for the src and dst based
on their respective dma_addr values, to remove the previous 32-byte
alignment limitation in the EDMA memcpy function.
Signed-off-by: Han Xu <han.xu@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20251119163255.502070-1-han.xu@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The driver has never supported anything but OF probe so drop the
unused platform module alias.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20251120164907.28007-1-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
There seems to be nothing preventing the driver from being compile
tested so enable that for wider build coverage.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20251120115016.8967-1-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The driver has never supported anything but OF probe so drop the unused
platform module alias.
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20251120114524.8431-10-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The driver has never supported anything but OF probe so drop the unused
platform module alias.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20251120114524.8431-9-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The driver does not support anything but OF probe since commit
3b0f4a54f2 ("dma:mmp_tdma: get sram pool through device tree").
Commit a67ba97dfb ("dmaengine: Use device_get_match_data()") later
removed most remnants of platform probing except for an unnecessary OF
node check in remove().
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20251120114524.8431-8-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The driver does not support anything but OF probe since commit
3b0f4a54f2 ("dma:mmp_tdma: get sram pool through device tree") so drop
the unused platform module alias.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20251120114524.8431-7-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The driver has never supported anything but OF probe so drop the unused
platform module alias.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20251120114524.8431-6-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The driver has never supported anything but OF probe so drop the unused
platform module alias.
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20251120114524.8431-5-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The driver has never supported anything but OF probe so drop the unused
platform module alias.
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20251120114524.8431-4-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The driver does not support anything but OF and ACPI probe since commit
b3757413b9 ("dmaengine: dw: platform: Use struct dw_dma_chip_pdata")
so drop the unused platform module alias along with the now unnecessary
driver name define.
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20251120114524.8431-3-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The driver has never supported anything but OF probe so drop the unused
platform module alias.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20251120114524.8431-2-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Allows the buildbot to detect potential issues with the code on various
platforms.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Eugen Hristev <eugen.hristev@linaro.org>
Link: https://patch.msgid.link/20251106022405.85604-3-rosenp@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
size_t formats under 32-bit evaluate to the same thing and GCC does not
warn against it. Not the case with 64-bit.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Eugen Hristev <eugen.hristev@linaro.org>
Link: https://patch.msgid.link/20251106022405.85604-2-rosenp@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
GFP_NOWAIT allocation may fail anytime. It needs to be changed to
GFP_NOIO. There's no need to handle an error because mempool_alloc with
GFP_NOIO can't fail.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: Eric Biggers <ebiggers@kernel.org>
This completes 3bc3c9c3ab ("bugs/core: Pass down the condition
string of WARN_ON_ONCE(cond) warnings to __WARN_FLAGS()") and makes
WARN_ON() and WARN_ON_ONCE() behaviour consistent.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20251110115757.690999560@infradead.org
Add a report_bug() variant where the bug_entry is already known. This
is useful when the exception instruction is not instantiated per-site.
But instead has a single instance. In such a case the bug_entry
address might be passed along in a known register or something.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20251110115757.575795595@infradead.org
Add BUG_FORMAT_ARGS; when an architecture is able to provide a va_list
given pt_regs, use this to print format arguments.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20251110115757.457339417@infradead.org
Three repeated CONFIG_GENERIC_BUG_RELATIVE_POINTERS #ifdefs right
after one another yields unreadable code. Add a helper.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20251110115757.341703850@infradead.org
Add BUG_FORMAT; an architecture opt-in feature that allows adding the
WARN_printf() format string to the bug_entry table.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20251110115757.223371452@infradead.org
Bring in the UDB and objtool data annotations to avoid conflicts while further extending the bug exceptions.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
The sole user of the remaining functions in intel_gmch.[ch] is in
intel_vga.c. Move everything there.
Since intel_gmch.c hasn't been part of xe, use a dummy function
relocated from xe_display_misc.c, with #ifdef. This is purely to keep
this change non-functional.
This allows us to remove soc/intel_gmch.[ch] from i915, compat
soc/intel_gmch.h from xe, and xe_display_misc.c from xe.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/b0f853ad7eae686738defa9e8f08a8848df8f226.1763578288.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Convert intel_gmch.[ch] to struct intel_display. Remove the final
dependency on struct drm_i915_private and i915_drv.h. This is in
preparation of moving the code under display/.
intel_gmch_vga_set_state() is only used internally, make it static while
at it.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/a4b317656eef0781d4f53ae337083fb05ce602bc.1763578288.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The sole user of intel_rom.[ch] has always been in display. Move them
under display.
This allows us to remove the compat soc/intel_rom.h from xe, as well as
the Makefile rules to build anything from soc/.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/352ec255a6e9b81c7d1e35d8fbf7018d4049d4d3.1763578288.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Convert everything except uncore access to struct
intel_display. Converting the graphics version checks to display version
checks needs a tweak for display version 13, which have graphics version
12.
While at it, convert logging to drm_dbg_kms().
v2: Handle display version 13
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251120161846.3128999-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The i915 core only needs three rather specific functions from
soc/intel_dram.[ch]: i9xx_fsb_freq(), ilk_fsb_freq(), and
ilk_mem_freq(). Add new i915_freq.[ch] and duplicate those functions for
i915 to reduce the dependency on soc/ code.
Wile duplication in general is bad, here it's a tradeoff to simplify the
i915, xe and display interactions.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/7bac1b194afdc20cd45e625a0a32fcbcd0b1136e.1763578288.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
While edram detection ostensibly belongs with the rest of the dram stuff
in soc/intel_dram.c, it's only required by i915 core, not
display. Extract it to a separate i915_edram.[ch] file.
This allows us to drop the edram_size_mb member from struct xe_device.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/612edb7b70755655fbf193ba8af1c539fb93b698.1763578288.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
If the parsed ELD has spk_alloc=0, it currently assigns the parsed ELD
spk_alloc to 0xffff. However, we should also check if there is at least
one SAD (Short audio descriptor) to enforce the assumption, as ELD
without any sad_count, is usually considered invalid for e.g. in
commit ce9778b7a0272("ALSA: hda/hdmi: Consider ELD is invalid when no
SAD is present").
Signed-off-by: Umang Jain <uajain@igalia.com>
Link: https://patch.msgid.link/20251120141757.901505-1-uajain@igalia.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The VSIE code currently checks that the BSCA struct fits within
a page, and returns a validity exception 0x003b if it doesn't.
The BSCA is pinned in memory rather than shadowed (see block
comment at end of kvm_s390_cpu_feat_init()), so enforcing the
CPU entries to be on the same pinned page makes sense.
Except those entries aren't going to be used below the guest,
and according to the definition of that validity exception only
the header of the BSCA (everything but the CPU entries) needs to
be within a page. Adjust the alignment check to account for that.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Starting with Zen6, AMD's Scalable MCA systems will incorporate two new bits in
MCA_STATUS and MCA_CONFIG MSRs. These bits will indicate if a valid System
Physical Address (SPA) is present in MCA_ADDR.
PhysAddrValidSupported bit (MCA_CONFIG[11]) serves as the architectural
indicator and states if PhysAddrV bit (MCA_STATUS[54]) is Reserved or if it
indicates validity of SPA in MCA_ADDR.
PhysAddrV bit (MCA_STATUS[54]) advertises if MCA_ADDR contains valid SPA or if
it is implementation specific.
Use and prefer MCA_STATUS[PhysAddrV] when checking for a usable address.
Signed-off-by: Avadhut Naik <avadhut.naik@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://patch.msgid.link/20251118191731.181269-1-avadhut.naik@amd.com
The MCA threshold limit generally is not something that needs to change during
runtime. It is common for a system administrator to decide on a policy for
their managed systems.
If MCA thresholding is OS-managed, then the threshold limit must be set at
every boot. However, many systems allow the user to set a value in their BIOS.
And this is reported through an APEI HEST entry even if thresholding is not in
FW-First mode.
Use this value, if available, to set the OS-managed threshold limit. Users
can still override it through sysfs if desired for testing or debug.
APEI is parsed after MCE is initialized. So reset the thresholding blocks
later to pick up the threshold limit.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20251104-wip-mca-updates-v8-0-66c8eacf67b9@amd.com
