*** Bug description ***
When testing kexec-reboot on a 144 cpus machine with
isolcpus=managed_irq,domain,1-71,73-143 in kernel command line, I
encounter the following bug:
[ 97.114759] psci: CPU142 killed (polled 0 ms)
[ 97.333236] Failed to offline CPU143 - error=-16
[ 97.333246] ------------[ cut here ]------------
[ 97.342682] kernel BUG at kernel/cpu.c:1569!
[ 97.347049] Internal error: Oops - BUG: 00000000f2000800 [#1] SMP
[...]
In essence, the issue originates from the CPU hot-removal process, not
limited to kexec. It can be reproduced by writing a SCHED_DEADLINE
program that waits indefinitely on a semaphore, spawning multiple
instances to ensure some run on CPU 72, and then offlining CPUs 1–143
one by one. When attempting this, CPU 143 failed to go offline.
bash -c 'taskset -cp 0 $$ && for i in {1..143}; do echo 0 > /sys/devices/system/cpu/cpu$i/online 2>/dev/null; done'
Tracking down this issue, I found that dl_bw_deactivate() returned
-EBUSY, which caused sched_cpu_deactivate() to fail on the last CPU.
But that is not the fact, and contributed by the following factors:
When a CPU is inactive, cpu_rq()->rd is set to def_root_domain. For an
blocked-state deadline task (in this case, "cppc_fie"), it was not
migrated to CPU0, and its task_rq() information is stale. So its rq->rd
points to def_root_domain instead of the one shared with CPU0. As a
result, its bandwidth is wrongly accounted into a wrong root domain
during domain rebuild.
*** Issue ***
The key point is that root_domain is only tracked through active rq->rd.
To avoid using a global data structure to track all root_domains in the
system, there should be a method to locate an active CPU within the
corresponding root_domain.
*** Solution ***
To locate the active cpu, the following rules for deadline
sub-system is useful
-1.any cpu belongs to a unique root domain at a given time
-2.DL bandwidth checker ensures that the root domain has active cpus.
Now, let's examine the blocked-state task P.
If P is attached to a cpuset that is a partition root, it is
straightforward to find an active CPU.
If P is attached to a cpuset that has changed from 'root' to 'member',
the active CPUs are grouped into the parent root domain. Naturally, the
CPUs' capacity and reserved DL bandwidth are taken into account in the
ancestor root domain. (In practice, it may be unsafe to attach P to an
arbitrary root domain, since that domain may lack sufficient DL
bandwidth for P.) Again, it is straightforward to find an active CPU in
the ancestor root domain.
This patch groups CPUs into isolated and housekeeping sets. For the
housekeeping group, it walks up the cpuset hierarchy to find active CPUs
in P's root domain and retrieves the valid rd from cpu_rq(cpu)->rd.
Signed-off-by: Pingfan Liu <piliu@redhat.com>
Cc: Waiman Long <longman@redhat.com>
Cc: Chen Ridong <chenridong@huaweicloud.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Pierre Gondois <pierre.gondois@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ben Segall <bsegall@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Valentin Schneider <vschneid@redhat.com>
To: linux-kernel@vger.kernel.org
Signed-off-by: Tejun Heo <tj@kernel.org>
cpuset_cpus_allowed() uses a reader lock that is sleepable under RT,
which means it cannot be called inside raw_spin_lock_t context.
Introduce a new cpuset_cpus_allowed_locked() helper that performs the
same function as cpuset_cpus_allowed() except that the caller must have
acquired the cpuset_mutex so that no further locking will be needed.
Suggested-by: Waiman Long <longman@redhat.com>
Signed-off-by: Pingfan Liu <piliu@redhat.com>
Cc: Waiman Long <longman@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: linux-kernel@vger.kernel.org
To: cgroups@vger.kernel.org
Reviewed-by: Chen Ridong <chenridong@huawei.com>
Reviewed-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The "phy_id" comes from the device tree so it's going to be correct.
But static checkers sometimes complain when we have an upper bounds
check with no lower bounds check. Also it's a bit unusual that the
lowest valid number is 1 instead of 0 so adding a check could
potentially help someone.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/aPJpB-QI8FMpFGOk@stanley.mountain
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Previous releases - regressions:
- prevent NULL deref in generic_hwtstamp_ioctl_lower(),
newer APIs don't populate all the pointers in the request
- phylink: add missing supported link modes for the fixed-link
- mptcp: fix false positive warning in mptcp_pm_nl_rm_addr
Previous releases - always broken:
- openvswitch: remove never-working support for setting NSH fields
- xfrm: number of fixes for error paths of xfrm_state creation/
modification/deletion
- xfrm: fixes for offload
- fix the determination of the protocol of the inner packet
- don't push locally generated packets directly to L2 tunnel
mode offloading, they still need processing from the standard
xfrm path
- mptcp: fix a couple of corner cases in fallback and fastclose
handling
- wifi: rtw89: hw_scan: prevent connections from getting stuck,
work around apparent bug in FW by tweaking messages we send
- af_unix: fix duplicate data if PEEK w/ peek_offset needs to wait
- veth: more robust handing of race to avoid txq getting stuck
- eth: ps3_gelic_net: handle skb allocation failures
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=89Xl
-----END PGP SIGNATURE-----
Merge tag 'net-6.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from IPsec and wireless.
Previous releases - regressions:
- prevent NULL deref in generic_hwtstamp_ioctl_lower(),
newer APIs don't populate all the pointers in the request
- phylink: add missing supported link modes for the fixed-link
- mptcp: fix false positive warning in mptcp_pm_nl_rm_addr
Previous releases - always broken:
- openvswitch: remove never-working support for setting NSH fields
- xfrm: number of fixes for error paths of xfrm_state creation/
modification/deletion
- xfrm: fixes for offload
- fix the determination of the protocol of the inner packet
- don't push locally generated packets directly to L2 tunnel
mode offloading, they still need processing from the standard
xfrm path
- mptcp: fix a couple of corner cases in fallback and fastclose
handling
- wifi: rtw89: hw_scan: prevent connections from getting stuck,
work around apparent bug in FW by tweaking messages we send
- af_unix: fix duplicate data if PEEK w/ peek_offset needs to wait
- veth: more robust handing of race to avoid txq getting stuck
- eth: ps3_gelic_net: handle skb allocation failures"
* tag 'net-6.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (47 commits)
vsock: Ignore signal/timeout on connect() if already established
be2net: pass wrb_params in case of OS2BMC
l2tp: reset skb control buffer on xmit
net: dsa: microchip: lan937x: Fix RGMII delay tuning
selftests: mptcp: add a check for 'add_addr_accepted'
mptcp: fix address removal logic in mptcp_pm_nl_rm_addr
selftests: mptcp: join: userspace: longer timeout
selftests: mptcp: join: endpoints: longer timeout
selftests: mptcp: join: fastclose: remove flaky marks
mptcp: fix duplicate reset on fastclose
mptcp: decouple mptcp fastclose from tcp close
mptcp: do not fallback when OoO is present
mptcp: fix premature close in case of fallback
mptcp: avoid unneeded subflow-level drops
mptcp: fix ack generation for fallback msk
wifi: rtw89: hw_scan: Don't let the operating channel be last
net: phylink: add missing supported link modes for the fixed-link
selftest: af_unix: Add test for SO_PEEK_OFF.
af_unix: Read sk_peek_offset() again after sleeping in unix_stream_read_generic().
net/mlx5: Clean up only new IRQ glue on request_irq() failure
...
The new Glymur SoC bumps up the HW version of QMP phy to v8.50 for PCIE
g5x4. Add the new PCS offsets in a dedicated header file.
Signed-off-by: Prudhvi Yarlagadda <quic_pyarlaga@quicinc.com>
Signed-off-by: Wenbin Yao <wenbin.yao@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Qiang Yu <qiang.yu@oss.qualcomm.com>
Link: https://patch.msgid.link/20251103-glymur-pcie-upstream-v6-2-18a5e0a538dc@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The fifth PCIe instance on Glymur has a Gen5 4-lane PHY. Document it as a
separate compatible.
Signed-off-by: Prudhvi Yarlagadda <quic_pyarlaga@quicinc.com>
Signed-off-by: Wenbin Yao <wenbin.yao@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Qiang Yu <qiang.yu@oss.qualcomm.com>
Link: https://patch.msgid.link/20251103-glymur-pcie-upstream-v6-1-18a5e0a538dc@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Bindings should be complete, thus complete the constraints for the
resets by adding missing compatibles for devices with two resets and
"else:" clause narrowing them for all other devices.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251017045919.34599-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Certain platforms may not have the PHY_ENABLE bit set on power on reset.
Update the current sequence to explicitly write to enable the PHY_ENABLE
bit. This ensures that regardless of the platform, the PHY is properly
enabled.
Signed-off-by: Ronak Raheja <ronak.raheja@oss.qualcomm.com>
Signed-off-by: Wesley Cheng <wesley.cheng@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20250920032158.242725-1-wesley.cheng@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The QMP USB3/DP Combo PHY hosts an USB3 phy and a DP PHY on top
of a combo glue to route either lanes to the 4 shared physical lanes.
The routing of the lanes can be:
- 2 DP + 2 USB3
- 4 DP
- 2 USB3
Get the lanes mapping from DT and stop registering the USB-C
muxes in favor of a static mode and orientation detemined
by the lanes mapping.
This allows supporting boards with direct connection of USB3 and
DisplayPort lanes to the QMP Combo PHY lanes, not using the
USB-C Altmode feature.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Tested-by: Xilin Wu <sophon@radxa.com> # qcs6490-radxa-dragon-q6a
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251119-topic-x1e80100-hdmi-v7-2-2bee0e66cc1b@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The QMP USB3/DP Combo PHY hosts an USB3 phy and a DP PHY on top
of a combo glue to route either lanes to the 4 shared physical lanes.
The routing of the lanes can be:
- 2 DP + 2 USB3
- 4 DP
- 2 USB3
The layout of the lanes was designed to be mapped and swapped
related to the USB-C Power Delivery negociation, so it supports
a finite set of mappings inherited by the USB-C Altmode layouts.
Nevertheless those QMP Comby PHY can be used to drive a DisplayPort
connector, DP->HDMI bridge, USB3 A Connector, etc... without
an USB-C connector and no PD events.
Document the data-lanes on numbered port@0 out endpoints,
allowing us to document the lanes mapping to DisplayPort
and/or USB3 connectors/peripherals.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251119-topic-x1e80100-hdmi-v7-1-2bee0e66cc1b@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
When PCIe link enters L1 PM substates, the PHY will turn off its
PLL for power-saving. However, it turns off the PLL too fast which
leads the PHY to be broken. According to the PHY document, we need
to delay PLL turnoff time.
Fixes: f13bff2516 ("phy: rockchip-naneng-combo: Support rk3562")
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/1763459526-35004-2-git-send-email-shawn.lin@rock-chips.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
When PCIe link enters L1 PM substates, the PHY will turn off its
PLL for power-saving. However, it turns off the PLL too fast which
leads the PHY to be broken. According to the PHY document, we need
to delay PLL turnoff time.
Fixes: bbcca4fac8 ("phy: rockchip: naneng-combphy: Add RK3528 support")
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/1763459526-35004-1-git-send-email-shawn.lin@rock-chips.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The Renesas RZ/G3S supports a power saving mode where power to most of the
SoC components is turned off. The USB PHY is among these components.
Because of this the settings applied in driver probe need to be executed
also on resume path. On suspend path only reset signal need to be asserted.
Add suspend/resume support.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251119120418.686224-3-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Move the check of phy_data->init_bus from rcar_gen3_phy_usb2_init_bus()
to rcar_gen3_phy_usb2_probe() to avoid having it duplicated in both the
probe path and the upcoming resume code. This is a preparatory patch.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251119120418.686224-2-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
If an error occurs after the reset_control_deassert(),
reset_control_assert() must be called, as already done in the remove
function.
Use devm_add_action_or_reset() to add the missing call and simplify the
.remove() function accordingly.
While at it, drop struct rcar_gen3_chan::rstc as it is not used aymore.
[claudiu.beznea: removed "struct reset_control *rstc = data;" from
rcar_gen3_reset_assert(), dropped struct rcar_gen3_chan::rstc]
Fixes: 4eae163753 ("phy: renesas: rcar-gen3-usb2: Add support to initialize the bus")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://patch.msgid.link/20251023135810.1688415-3-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The reset lines are mandatory for the Renesas RZ/G3S platform and must be
explicitly defined in device tree.
Fixes: f3c8498551 ("dt-bindings: phy: renesas,usb2-phy: Document RZ/G3S phy bindings")
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://patch.msgid.link/20251023135810.1688415-2-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Commit f4fb9c4d7f ("phy: exynos5-usbdrd: allow DWC3 runtime suspend
with UDC bound (E850+)") incorrectly added clk_bulk_disable() as the
inverse of clk_bulk_prepare_enable() while it should have of course
used clk_bulk_disable_unprepare(). This means incorrect reference
counts to the CMU driver remain.
Update the code accordingly.
Fixes: f4fb9c4d7f ("phy: exynos5-usbdrd: allow DWC3 runtime suspend with UDC bound (E850+)")
CC: stable@vger.kernel.org
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://patch.msgid.link/20251006-gs101-usb-phy-clk-imbalance-v1-1-205b206126cf@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
These two patches improve the implementation of the debugfs files for
the wmfw and bin file names. First patch removes duplicated code. Second
patch replaces the old clunkiness of storing the filename with an appended
\n. The \n can be appended when the file is read, to keep the stored string
sane.
Platform drivers can be probed after their init sections have been
discarded (e.g. on probe deferral or manual rebind through sysfs) so the
probe function and match table must not live in init.
Fixes: 783f6d3dcf ("phy: bcm63xx-usbh: Add BCM63xx USBH driver")
Cc: stable@vger.kernel.org # 5.9
Cc: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251017054537.6884-1-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
For MIPI mode, the inno-dsidphy found on RK3506 supports up to 2 lanes
and a maximum data rate of 1.5GHz.
Signed-off-by: Hongming Zou <hongming.zou@rock-chips.com>
Signed-off-by: Chaoyi Chen <chaoyi.chen@rock-chips.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251106020632.92-7-kernel@airkyi.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add a driver for the FP9931/JD9930 regulator. Implement handling of the PG
(power good), TS_EN (temperature sensor enable), and EN (enable regulators)
pins. Implement the pair of symmetric LDOs as a single regulator because
they share a single voltage set register. For simplicity, just add the
temperature sensor (depending on external NTC) directly.
Limitations:
- As these regulators are controlled together with the VCOM regulator via
the EN pin, some kind of management must be in place. As the enable op
is not called when the regulator is already enabled, simple refcounting
seems not to work to avoid clearing EN when one regulator is still
enabled. As these regulators are typically used together, this
limitation should not hurt hard, just provide the is_enabled op.
- As the VCOM step is quite odd (5V/255 steps), rounding is needed.
Due to some limitations in the regulator core, the max/min voltages in
the devicetree must match the idea of the driver how to round things
exactly.
- Night mode is not implemented, so only the FP9931 compatible is needed in
the driver, there is no REGULATOR_MODE_NIGHT and no clear definition in
the datasheet what it does, also the XON pin which seems to be an input
related to that night mode is not used.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Link: https://patch.msgid.link/20251115-fp9931-submit-v3-3-92f5d0772b68@kemnade.info
Signed-off-by: Mark Brown <broonie@kernel.org>
Document the FP9931/JD9930. As the FP9931 is a clear subset of the JD9930,
define it as a fallback compatible. GPIO names are same as in the datasheet
except for the EN pad which is described as "enable".
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Link: https://patch.msgid.link/20251115-fp9931-submit-v3-2-92f5d0772b68@kemnade.info
Signed-off-by: Mark Brown <broonie@kernel.org>
Add Fitipower Integrated Technology Inc. to the vendor prefixes.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Link: https://patch.msgid.link/20251115-fp9931-submit-v3-1-92f5d0772b68@kemnade.info
Signed-off-by: Mark Brown <broonie@kernel.org>
The strm->sample_width is not filled during rz_ssi_dai_hw_params(). This
wrong value is used for caching sample_width in struct hw_params_cache.
Fix this issue by replacing 'strm->sample_width'->'params_width(params)'
in rz_ssi_dai_hw_params(). After this drop the variable sample_width
from struct rz_ssi_stream as it is unused.
Cc: stable@kernel.org
Fixes: 4f8cd05a43 ("ASoC: sh: rz-ssi: Add full duplex support")
Reviewed-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/20251114073709.4376-3-biju.das.jz@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The full duplex audio starts with half duplex mode and then switch to
full duplex mode (another FIFO reset) when both playback/capture
streams available leading to random audio left/right channel swap
issue. Fix this channel swap issue by detecting the full duplex
condition by populating struct dup variable in startup() callback
and synchronize starting both the play and capture at the same time
in rz_ssi_start().
Cc: stable@kernel.org
Fixes: 4f8cd05a43 ("ASoC: sh: rz-ssi: Add full duplex support")
Co-developed-by: Tony Tang <tony.tang.ks@renesas.com>
Signed-off-by: Tony Tang <tony.tang.ks@renesas.com>
Reviewed-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/20251114073709.4376-2-biju.das.jz@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a compatible string for Filogic 820, this chip integrates a MediaTek
generic T-PHY version 2
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sjoerd Simons <sjoerd@collabora.com>
Link: https://patch.msgid.link/20251115-openwrt-one-network-v4-3-48cbda2969ac@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Use the new SND_SOC_BYTES_E_ACC() macro instead of SND_SOC_BYTES_E()
to define the CAL_DATA_RB control, so that it is marked as read-only
and volatile.
This avoids userland code expecting to be able to write to it and
then getting an unexpected EPERM error, or assuming that its value
can never change.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20251120134437.1179191-5-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the new SOC_ENUM_EXT_ACC() macro instead of SOC_ENUM_EXT() to
define the CAL_SET_STATUS control, so that it is marked as read-only
and volatile.
This avoids userland code expecting to be able to write to it and
then getting an unexpected EPERM error, or assuming that its value
can never change.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20251120134437.1179191-4-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a macro SND_SOC_BYTES_E_ACC() to allow the access permission flags
to be set. This is the same as SND_SOC_BYTES_E() but with an extra
argument for the access flags.
This will be used by the cs35l56.c driver to create a read-only
volatile byte control. It's preferable to avoid custom control macros
in codec drivers. Code maintenance is easier if all control macros are
defined together in soc.h.
This commit only creates this one macro that is actually going to be used.
There's no point cluttering soc.h with unused macros - that just adds a
maintenance burden. People can add equivalents for the other macros if
they need them.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20251120134437.1179191-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a macro SOC_ENUM_EXT_ACC() to allow the access permission flags
to be set. This is the same as SOC_ENUM_EXT() but with an extra
argument for the access flags.
This will be used by the cs35l56.c driver to create a read-only
volatile enum. It's preferable to avoid custom control macros in codec
drivers. Code maintenance is easier if all control macros are defined
together in soc.h.
This commit only creates this one macro that is actually going to be used.
There's no point cluttering soc.h with unused macros - that just adds a
maintenance burden. People can add equivalents for the other macros if
they need them.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20251120134437.1179191-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
GPIO machine lookup is a nice mechanism for associating GPIOs with
consumers if we don't know what kind of device the GPIO provider is or
when it will become available. However in the case of the reset-gpio, we
are already holding a reference to the device and so can reference its
firmware node. Let's setup a software node that references the relevant
GPIO and attach it to the auxiliary device we're creating.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
As the reset-gpio devices are purely virtual and never instantiated from
real firmware nodes, let's convert the driver to using the - more
fitting - auxiliary bus.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Auxiliary devices really do need a parent so ahead of converting the
reset-gpios driver to registering on the auxiliary bus, make the GPIO
device that provides the reset GPIO the parent of the reset-gpio device.
To that end move the lookup of the GPIO device by fwnode to the
beginning of __reset_add_reset_gpio_device() which has the added benefit
of bailing out earlier, before allocating resources for the virtual
device, if the chip is not up yet.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
For better readability and easier maintenance order the includes
alphabetically.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
When doing a software node lookup, we require both the fwnode that
references a GPIO chip as well as the node associated with that chip to
be software nodes. However, we now allow referencing generic firmware
nodes from software nodes in driver core so we should allow the same in
GPIO core. Make the software node name check optional and dependent on
whether the referenced firmware node is a software node. If it's not,
just continue with the lookup.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
On some systems the cs42l43 has amplifiers attached to its SPI
controller that are not properly defined in ACPI. Currently
software nodes are added to support this case, however, the chip
selects for these devices are specified using a hack. A software
node is added with the same name as the pinctrl driver, as the
look up was name based, this allowed the GPIO look up to return
the pinctrl driver even though the swnode was not owned by it.
This was necessary as the swnodes did not support directly
linking to real firmware nodes.
Since commit e5d527be7e ("gpio: swnode: don't use the swnode's
name as the key for GPIO lookup") changed the lookup to be
fwnode based this hack will no longer find the pinctrl driver,
resulting in the driver not probing. There is no pinctrl driver
attached to the swnode itself. But other patches did add support
for linking a swnode to a real fwnode node [1]. As such the hack
is no longer needed, so switch over to just passing the real
fwnode for the pinctrl property to avoid any issues.
[Bartosz:
- remove unneeded Fixes: tag,
- use PROPERTY_ENTRY_REF_ARRAY() instead of PROPERTY_ENTRY_REF_ARRAY_LEN()]
Link: https://lore.kernel.org/linux-gpio/20251106-reset-gpios-swnodes-v6-0-69aa852de9e4@linaro.org/ [1]
Fixes: 439fbc9750 ("spi: cs42l43: Add bridged cs35l56 amplifiers")
Cc: stable+noautosel@kernel.org # Don't backport, previous approach works, fix relies on swnode changes
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
At the moment software nodes can only reference other software nodes.
This is a limitation for devices created, for instance, on the auxiliary
bus with a dynamic software node attached which cannot reference devices
the firmware node of which is "real" (as an OF node or otherwise).
Make it possible for a software node to reference all firmware nodes in
addition to static software nodes. To that end: add a second pointer to
struct software_node_ref_args of type struct fwnode_handle. The core
swnode code will first check the swnode pointer and if it's NULL, it
will assume the fwnode pointer should be set.
Software node graphs remain the same, as in: the remote endpoints still
have to be software nodes.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Once we allow software nodes to reference other kinds of firmware nodes,
the node in args will no longer necessarily be a software node so bump
its reference count using its fwnode interface.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Once we allow software nodes to reference all kinds of firmware nodes,
the refnode here will no longer necessarily be a software node so read
its proprties going through its fwnode implementation.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
We could go to the USB consortium, but it's probably
easier that way.
And update HID usage table json generated file from
https://usb.org/sites/default/files/hut1_6.pdf updated: 01/30/2025
Reported-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://gitlab.freedesktop.org/libevdev/udev-hid-bpf/-/merge_requests/191
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Same issues with a secondary tip switch instead of secondary barrel
switch as the Kamvas 19.
Copy the stable Kamvas 19 support back into testing and add the vid/pid
for the Kamvas 27.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Link: https://gitlab.freedesktop.org/libevdev/udev-hid-bpf/-/merge_requests/189
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
When pressing the phsyical eraser button (remapped by us to the
Secondary Barrel Switch) while the tip is down, the device
gives us several false reports with a Tip Switch 0:
press| |release
SBS: [0 0 ... 1 1 1 ... 1 0 0 0 0 0 0 ...]
TS: [1 1 ... 1 0 1 ... 1 1 0 0 0 1 1 ...]
In both press/release the number of Tip Switch 0 reports can be up to 4
and *sometimes* the Tip Switch is released in the same report
as the button press/release event.
Paper over this by forcing the tip down for a few reports if it was down
before the button toggled.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Link: https://gitlab.freedesktop.org/libevdev/udev-hid-bpf/-/merge_requests/195
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Modifies report to have tablet buttons report as buttons, rather than as
keyboard key combinations. The dial is also converted to a relative
input, using the dedicated bit previously reserved for modifier key
information.
Signed-off-by: Hannah Pittman <dev@hannahl.co.uk>
Link: https://gitlab.freedesktop.org/libevdev/udev-hid-bpf/-/merge_requests/203
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
This device needs a fix for the tilt range on the pen report descriptor
and the usual conversion of the pad keys from the firmware's hardcoded
keyboard shortcuts to actual pad buttons.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Link: https://gitlab.freedesktop.org/libevdev/udev-hid-bpf/-/merge_requests/185
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Several bugs as outlined in udev-hid-bpf#66 and udev-hid-bpf!198:
- pressure curve is far from linear
- tilt range is ±60, not ±127
- pressing the second button sets both tip down and
barrel switch
Fix the second button by adding a Secondary Barrel Switch in the
existing padding and check for the tip down/barrel switch down combo.
When both values become true at the same time, set the Secondary Barrel
Switch instead.
Implement a custom pressure curve that maps the hardware range 0-102
linearly to the logical range 0-1224, and maps the hardware range
103-2047 logarithmically to the logical range 1232-2047. This mapping
isn’t perfect, but it’s way more natural than the stock configuration.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Jan Felix Langenbach <JanFelix.Langenbach@protonmail.com>
Link: https://gitlab.freedesktop.org/libevdev/udev-hid-bpf/-/merge_requests/200
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The 3Dconnexion SpaceNavigator HID report descriptor declares its axis
data to be "relative" when it is actually "absolute". This quirk was
addressed in the kernel in 2.6.33, but some SpaceNavigator variants have
a slightly different report descriptor whose axis input items are at
different offsets than those assumed by the kernel fixup.
Add a BPF fixup to handle both sets of offsets for known SpaceNavigator
variants if the descriptor has not already been fixed by the kernel.
Signed-off-by: Curran Muhlberger <curran@cs.cornell.edu>
Link: https://gitlab.freedesktop.org/libevdev/udev-hid-bpf/-/merge_requests/181
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
