Once we called device_initialize() we have to call put_device()
on it. Refactor the code to make it in the right order.
Fixes: fe6f45f6ba ("iio: core: check return value when calling dev_set_name()")
Fixes: 847ec80bba ("Staging: IIO: core support for device registration and management")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add missing mutex_destroy() call in iio_dev_release() to properly
clean up the mutex initialized in iio_device_alloc(). Ensure proper
resource cleanup and follows kernel practices.
Found by code review.
While at it, create a lockdep key before mutex initialisation.
This will help with converting it to the better API in the future.
Fixes: 847ec80bba ("Staging: IIO: core support for device registration and management")
Fixes: ac917a8111 ("staging:iio:core set the iio_dev.info pointer to null on unregister under lock.")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add support for Adreno 612 GPU found in SM6150/QCS615 chipsets.
A612 falls under ADRENO_6XX_GEN1 family and is a cut down version
of A615 GPU.
A612 has a new IP called Reduced Graphics Management Unit or RGMU
which is a small state machine which helps to toggle GX GDSC
(connected to CX rail) to implement IFPC feature. It doesn't support
any other features of a full fledged GMU like clock control, resource
voting to rpmh etc. So we need linux clock driver support like other
gmu-wrapper implementations to control gpu core clock and gpu GX gdsc.
This patch skips RGMU core initialization and act more like a
gmu-wrapper case.
Signed-off-by: Jie Zhang <quic_jiezh@quicinc.com>
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/686212/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
The ADXL318 and ADXL319 are low noise density, low power, 3-axis
accelerometers based on ADXL380 and ADXL382, respectively. The main
difference between the new parts and the existing ones are the absence
of interrupts and events like tap detection, activity/inactivity, and
free-fall detection.
Other differences in the new parts are fewer power modes, basically
allowing only idle and measurement modes, and the removal of the 12-bit
SAR ADC path for the 3-axis signals (known as lower signal chain),
being excluisive for the temperature sensor in the ADXL318/319.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Santos <Jonathan.Santos@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Akhil should be getting tagged to review GPU patches.
Cc: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Acked-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/685650/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
vm_op_enqueue() allocates an msm_vm_op struct with kmalloc,
but the return value is not checked for NULL value which
can be returned by kmalloc under low-memory conditions.
This can result in NULL pointer dereference when the pointer
is dereferenced.
Add NULL check after the allocation and propagate -ENOMEM back
to the caller in case of a failure.
Signed-off-by: Gopi Krishna Menon <krishnagopi487@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/678416/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Include ADXL318 and ADXL319 accelerometers to the documentation.
The ADXL318 is based on the ADXL380, while the ADXL319 is based on the
ADXL382. However, the ADXL318/319 do not support some built-in features
like single tap, double tap and triple tap detection, and also activity
and inactivity detection.
Signed-off-by: Jonathan Santos <Jonathan.Santos@analog.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
- Fix a bug in the __ptep_rdp() inline assembly which may lead to
missing TLB flushes
-----BEGIN PGP SIGNATURE-----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=5CBh
-----END PGP SIGNATURE-----
Merge tag 's390-6.18-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fix from Heiko Carstens:
- Fix a bug in the __ptep_rdp() inline assembly which may lead to
missing TLB flushes
* tag 's390-6.18-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/mm: Fix __ptep_rdp() inline assembly
- Update the list of AMD microcode minimum Entrysign revisions
- Add additional fixed AMD RDSEED microcode revisions
- Update the language transliteration for Kiryl Shutsemau's
name in the MAINTAINERS entry
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=r/gL
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2025-11-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
- Update the list of AMD microcode minimum Entrysign revisions
- Add additional fixed AMD RDSEED microcode revisions
- Update the language transliteration for Kiryl Shutsemau's name
in the MAINTAINERS entry
* tag 'x86-urgent-2025-11-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/microcode/AMD: Add Zen5 model 0x44, stepping 0x1 minrev
x86/CPU/AMD: Add additional fixed RDSEED microcode revisions
MAINTAINERS: Update name spelling
hasn't caused problems upstream yet because no arch overrides
arch_xfer_to_guest_mode_handle_work() at this moment.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=7by8
-----END PGP SIGNATURE-----
Merge tag 'core-urgent-2025-11-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core fix from Ingo Molnar:
"Fix a broken #ifndef in the <linux/entry-virt.h> header.
It hasn't caused problems upstream yet because no arch overrides
arch_xfer_to_guest_mode_handle_work() at this moment"
* tag 'core-urgent-2025-11-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
entry: Fix ifndef around arch_xfer_to_guest_mode_handle_work() stub
If pm_runtime_put_sync() fails after watchdog_register_device()
succeeds, the probe function jumps to err_exit without
unregistering the watchdog device. This leaves the watchdog
registered in the subsystem while the driver fails to load,
resulting in a resource leak.
Add a new error label err_unregister_wdt to properly unregister
the watchdog device.
Fixes: 8bc22a2f1b ("watchdog: starfive: Check pm_runtime_enabled() before decrementing usage counter")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Reviewed-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Add compatible for Airoha AN7583 SoC. The implementation is exactly the
same of Airoha EN7581 hence we add the compatible in addition to EN7581
ones.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Convert the Lantiq WDT Watchdog bindings to yaml format.
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
The watchdog used on the RK3506 is still the same snps,dw-wdt compatible
one that is in use since the RK3066 days, so add the RK3506 to the
variant list.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
pw-bot: not-applicable
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
wdat_wdt_probe() calls acpi_get_table() to obtain the WDAT ACPI table but
never calls acpi_put_table() on any paths. This causes a permanent ACPI
table memory leak.
Add a single cleanup path which calls acpi_put_table() to ensure
the ACPI table is always released.
Fixes: 058dfc7670 ("ACPI / watchdog: Add support for WDAT hardware watchdog")
Suggested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
According to the manual, the Loongson-2K0300 watchdog is similar to the
Loongson-1, except for some register offsets and inconsistent register
bit definitions. Separate definitions via driver_data suffice.
Co-developed-by: Xiaochuang Mao <maoxiaochuan@loongson.cn>
Signed-off-by: Xiaochuang Mao <maoxiaochuan@loongson.cn>
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Add "loongson,ls2k0300-wdt" compatible to the dt-schema document, which
is similar to Loongson-1 watchdog, but with differences in some register
offsets and bit definitions.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
pw-bot: not-applicable
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
The general recommendation is to not use of_match_ptr() or CONFIG_OF
ifdef.
Drop them.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Correct spelling and capitalizaion in the header comment so the
documentation reads cleanly.
Signed-off-by: Zoe Gates <zoe@zeocities.dev>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Add compatible string for the watchdog block on MT8189 SoC, which is
compatible with the one used on MT6589.
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
pw-bot: not-applicable
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
The parent node of ROHM BD96801 PMIC is also holding properties for the
watchdog, thus it should reference watchdog.yaml schema. OTOH, the
timeout-sec property is used only as one number.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Matti Vaittinen <mazziesaccount@gmail.com>
Acked-by: Lee Jones <lee@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Watchdog is often part of more complex devices like Power Management ICs
(PMIC), e.g. on rohm,bd96801, and the schema can be referenced by a
binding describing parent (main) node. Allow another typical name for
such PMIC devices: pmic.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Linux kernel expects only one number for the watchdog timeout and the
type is an array (defined in property-units.yaml in DT schema), so
restrict the property.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
This driver adds support for the Renesas Window Watchdog Timer (WWDT).
Because it can only be setup once after boot and we cannot know if this
already happened in early boot stages, it is mandated that the firmware
configures the watchdog. Linux then adapts according to the given
setup. Note that this watchdog only reports an overflow to the Error
Control Module (ECM) and does not reset the SoC on its own.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Describe the Window Watchdog Timer found on Renesas R-Car SoCs from late
Gen3 onwards.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
pw-bot: not-applicable
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Convert the TI OMAP watchdog binding to DT schema format. The compatible
string list was incomplete. The "reg" and "interrupts" properties were
missing. "ti,hwmods" is also deprecated and not required.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Add AST2700 platform support to the ASPEED watchdog driver. This includes
a new per-platform configuration with SCU reset status register at
SCU1_070 and support for 5 reset mask registers.
Signed-off-by: Chin-Ting Kuo <chin-ting_kuo@aspeedtech.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Starting from the AST2600 platform, the SoC design has become more
complex, with an increased number of reset mask registers.
To support this, introduce a new field 'num_reset_masks' in the
'aspeed_wdt_config' structure to specify the number of reset mask
registers per platform. This change removes the need for hardcoded
platform-specific logic and improves scalability for future SoCs.
Signed-off-by: Chin-Ting Kuo <chin-ting_kuo@aspeedtech.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Add support for the AST2700 SoC in the ASPEED watchdog device tree
bindings. This includes:
- Adding "aspeed,ast2700-wdt" to the compatible string list.
- Extending the "aspeed,reset-mask" property description for AST2700.
- Defining AST2700-specific reset mask bits in aspeed-wdt.h,
covering RESET1 to RESET5.
Signed-off-by: Chin-Ting Kuo <chin-ting_kuo@aspeedtech.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
The SWDT on V3H has no reset bit. Make resets optional on this SoC.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Renesas created different watchdog IPs but they are all handled in the
same binding documentation. This leads to a lot of conditional handling
which makes it unnecessarily hard to add new items. Factor out the
RZ/V2H(P) watchdog to make handling easier.
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Renesas created different watchdog IPs but they are all handled in the
same binding documentation. This leads to a lot of conditional handling
which makes it unnecessarily hard to add new items. Factor out the
RZ/G2L watchdog to make handling easier.
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Renesas created different watchdog IPs but they are all handled in the
same binding documentation. This leads to a lot of conditional handling
which makes it unnecessarily hard to add new items. Factor out the RZ/N1
watchdog to make handling easier.
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Renesas created different watchdog IPs but they are all handled in the
same binding documentation. This leads to a lot of conditional handling
which makes it unnecessarily hard to add new items. Factor out the RZ/A
watchdog to make handling easier.
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
The VIA watchdog driver uses allocate_resource() to reserve a MMIO
region for the watchdog control register. However, the allocated
resource was not given a name, which causes the kernel resource tree
to contain an entry marked as "<BAD>" under /proc/iomem on x86
platforms.
During boot, this unnamed resource can lead to a critical hang because
subsequent resource lookups and conflict checks fail to handle the
invalid entry properly.
Signed-off-by: Li Qiang <liqiang01@kylinos.cn>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Pass in a PCI device to Spec::new(), and provide a Display
implementation for boot42, in order to provide a clear, concise report
of what happened: the driver read NV_PMC_BOOT42, and found that the GPU
is not supported.
For very old GPUs (older than Fermi), the driver still returns ENODEV,
but it does so without a driver-specific dmesg report. That is exactly
appropriate, because if such a GPU is installed, it can only be
supported by Nouveau. And if so, the user is not helped by additional
error messages from Nova.
Here's the full dmesg output for a Blackwell (not yet supported) GPU:
NovaCore 0000:01:00.0: Probe Nova Core GPU driver.
NovaCore 0000:01:00.0: Unsupported chipset: boot42 = 0x1b2a1000 (architecture 0x1b, implementation 0x2)
NovaCore 0000:01:00.0: probe with driver NovaCore failed with error -524
Cc: Alexandre Courbot <acourbot@nvidia.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Timur Tabi <ttabi@nvidia.com>
Cc: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
[acourbot@nvidia.com: fix commit log with ENODEV (not ENOTSUPP) error
code for unsupported GPUs.]
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Message-ID: <20251115010923.1192144-5-jhubbard@nvidia.com>
NVIDIA GPUs are moving away from using NV_PMC_BOOT_0 to contain
architecture and revision details, and will instead use NV_PMC_BOOT_42
in the future. NV_PMC_BOOT_0 will contain a specific set of values
that will mean "go read NV_PMC_BOOT_42 instead".
Change the selection logic in Nova so that it will claim Turing and
later GPUs. This will work for the foreseeable future, without any
further code changes here, because all NVIDIA GPUs are considered, from
the oldest supported on Linux (NV04), through the future GPUs.
Add some comment documentation to explain, chronologically, how boot0
and boot42 change with the GPU eras, and how that affects the selection
logic.
Cc: Alexandre Courbot <acourbot@nvidia.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Timur Tabi <ttabi@nvidia.com>
Reviewed-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
[acourbot@nvidia.com: remove unneeded `From<BOOT_0> for Revision`
implementation.]
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Message-ID: <20251115010923.1192144-4-jhubbard@nvidia.com>
This allows Architecture to be passed into register!() and bitfield!()
macro calls. That in turn requires a default implementation for
Architecture.
This simplifies transforming BOOT0 (and later, BOOT42) register values
into GPU architectures.
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Timur Tabi <ttabi@nvidia.com>
Suggested-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Message-ID: <20251115010923.1192144-3-jhubbard@nvidia.com>
Allow a both Revision and Spec to be constructed directly from a
NV_PMC_BOOT_0 register.
Also, slightly enhance the comment about Spec, to be more precise.
Cc: Alexandre Courbot <acourbot@nvidia.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Timur Tabi <ttabi@nvidia.com>
Reviewed-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Message-ID: <20251115010923.1192144-2-jhubbard@nvidia.com>
After GSP initialization is complete, retrieve the static configuration
information from GSP-RM. This information includes GPU name, capabilities,
memory configuration, and other properties. On some GPU variants, it is
also required to do this for initialization to complete.
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Co-developed-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
[acourbot@nvidia.com: properly abstract the command's bindings, add
relevant methods, make str_from_null_terminated return an Option, fix
size of GPU name array.]
Co-developed-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Message-ID: <20251114195552.739371-14-joelagnelf@nvidia.com>
This adds the GSP init done command to wait for GSP initialization
to complete. Once this command has been received the GSP is fully
operational and will respond properly to normal RPC commands.
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Co-developed-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
[acourbot@nvidia.com: move new definitions to end of commands.rs, rename
to `wait_gsp_init_done` and remove timeout argument.]
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Message-ID: <20251114195552.739371-13-joelagnelf@nvidia.com>
