Current gu2host handler registered as MSI-X vector 0 and as per bspec for
a msix vector 0 interrupt, the driver must check the legacy registers
190008(TILE_INT_REG), 190060h (GT INTR Identity Reg 0) and other registers
mentioned in "Interrupt Service Routine Pseudocode" otherwise it will block
the next interrupts. To overcome this issue replacing guc2host handler
with legacy xe_irq_handler.
Fixes: da889070be ("drm/xe/irq: Separate MSI and MSI-X flows")
Bspec: 62357
Signed-off-by: Venkata Ramana Nayana <venkata.ramana.nayana@intel.com>
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://patch.msgid.link/20251107083141.2080189-1-venkata.ramana.nayana@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
-----BEGIN PGP SIGNATURE-----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=2eqF
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.18-fixes-5' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fixes from Bjorn Helgaas:
- Cache the ASPM L0s/L1 Supported bits early so quirks can override
them if necessary (Bjorn Helgaas)
- Add quirks for PA Semi and Freescale Root Ports and a HiSilicon Wi-Fi
device that are reported to have broken L0s and L1 (Shawn Lin, Bjorn
Helgaas)
* tag 'pci-v6.18-fixes-5' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI/ASPM: Avoid L0s and L1 on Hi1105 [19e5:1105] Wi-Fi
PCI/ASPM: Avoid L0s and L1 on PA Semi [1959:a002] Root Ports
PCI/ASPM: Avoid L0s and L1 on Freescale [1957:0451] Root Ports
PCI/ASPM: Convert quirks to override advertised link states
PCI/ASPM: Add pcie_aspm_remove_cap() to override advertised link states
PCI/ASPM: Cache L0s/L1 Supported so advertised link states can be overridden
-----BEGIN PGP SIGNATURE-----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=JJui
-----END PGP SIGNATURE-----
Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Pull bpf fixes from Alexei Starovoitov:
- Fix interaction between livepatch and BPF fexit programs (Song Liu)
With Steven and Masami acks.
- Fix stack ORC unwind from BPF kprobe_multi (Jiri Olsa)
With Steven and Masami acks.
- Fix out of bounds access in widen_imprecise_scalars() in the verifier
(Eduard Zingerman)
- Fix conflicts between MPTCP and BPF sockmap (Jiayuan Chen)
- Fix net_sched storage collision with BPF data_meta/data_end (Eric
Dumazet)
- Add _impl suffix to BPF kfuncs with implicit args to avoid breaking
them in bpf-next when KF_IMPLICIT_ARGS is added (Mykyta Yatsenko)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Test widen_imprecise_scalars() with different stack depth
bpf: account for current allocated stack depth in widen_imprecise_scalars()
bpf: Add bpf_prog_run_data_pointers()
selftests/bpf: Add mptcp test with sockmap
mptcp: Fix proto fallback detection with BPF
mptcp: Disallow MPTCP subflows from sockmap
selftests/bpf: Add stacktrace ips test for raw_tp
selftests/bpf: Add stacktrace ips test for kprobe_multi/kretprobe_multi
x86/fgraph,bpf: Fix stack ORC unwind from kprobe_multi return probe
Revert "perf/x86: Always store regs->ip in perf_callchain_kernel()"
bpf: add _impl suffix for bpf_stream_vprintk() kfunc
bpf:add _impl suffix for bpf_task_work_schedule* kfuncs
selftests/bpf: Add tests for livepatch + bpf trampoline
ftrace: bpf: Fix IPMODIFY + DIRECT in modify_ftrace_direct()
ftrace: Fix BPF fexit with livepatch
Toolchain and infrastructure:
- Fix a Rust 1.91.0 build issue due to 'bindings.o' not containing
DWARF debug information anymore by teaching gendwarfksyms to skip
object files without exports.
-----BEGIN PGP SIGNATURE-----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=FPGX
-----END PGP SIGNATURE-----
Merge tag 'rust-fixes-6.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull Rust fix from Miguel Ojeda:
- Fix a Rust 1.91.0 build issue due to 'bindings.o' not containing
DWARF debug information anymore by teaching gendwarfksyms to skip
object files without exports
* tag 'rust-fixes-6.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux:
gendwarfksyms: Skip files with no exports
When there are multiple Video Ports, and only one of them is working
(for example, VP1 is working while VP0 is not), in this case, the
win_mask of VP0 is 0. However, we have already set the port mux for VP0
according to vp0->nlayers, and at the same time, in the OVL_LAYER_SEL
register, there are windows will also be assigned to layers which will
map to the inactive VPs. In this situation, vp0->win_mask is zero as it
now working, it is more reliable to calculate the used layers based on
the configuration of the OVL_LAYER_SEL register.
Note: as the configuration of OVL_LAYER_SEL is take effect when the
vsync is come, so we use the value backup in vop2->old_layer_sel instead
of read OVL_LAYER_SEL directly.
Fixes: 3e89a8c683 ("drm/rockchip: vop2: Fix the update of LAYER/PORT select registers when there are multi display output on rk3588/rk3568")
Cc: stable@vger.kernel.org
Reported-by: Diederik de Haas <diederik@cknow-tech.com>
Closes: https://bugs.kde.org/show_bug.cgi?id=511274
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Tested-by: Dang Huynh <dang.huynh@mainlining.org>
Tested-by: Diederik de Haas <diederik@cknow-tech.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20251112085024.2480111-1-andyshrk@163.com
Use the exact enum name when documenting "enum sgx_attribute" to fix a
warning if the file is fed into kernel-doc processing:
WARNING: ./arch/x86/include/asm/sgx.h:139 expecting prototype for enum
sgx_attributes. Prototype was for enum sgx_attribute instead
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Link: https://patch.msgid.link/20251112160708.1343355-6-seanjc%40google.com
Drop an asterisk from a file-level copyright comment so that the comment
isn't intrepeted as a kernel-doc comment.
E.g. if arch/x86/include/asm/sgx.h is fed into kernel-doc processing:
WARNING: ./arch/x86/include/asm/sgx.h:2 This comment starts with '/**',
but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Link: https://patch.msgid.link/20251112160708.1343355-5-seanjc%40google.com
Use '@' to document structure members and enum values in kernel-doc markup,
as per Documentation/doc-guide/kernel-doc.rst and flagged by make htmldocs.
WARNING: arch/x86/include/uapi/asm/sgx.h:17 Enum value 'SGX_PAGE_MEASURE'
not described in enum 'sgx_page_flags'
Opportunistically add a missing ':' for SGX_CHILD_PRESENT.
Closes: https://lore.kernel.org/all/20251106145506.145fc620@canb.auug.org.au
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Link: https://patch.msgid.link/20251112160708.1343355-4-seanjc%40google.com
Add kernel-doc markup for the register parameters passed by the vDSO blob
to the user handler to suppress build warnings, e.g.
WARNING: arch/x86/include/uapi/asm/sgx.h:157 function parameter 'r8' not
described in 'sgx_enclave_user_handler_t'
Call out that except for RSP, the registers are undefined on asynchronous
exits as far as the vDSO ABI is concerned. E.g. the vDSO's exception
handler clobbers RDX, RDI, and RSI, and the kernel doesn't guarantee that
R8 or R9 will be zero (the synthetic value loaded by the CPU).
Closes: https://lore.kernel.org/all/20251106145506.145fc620@canb.auug.org.au
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Link: https://patch.msgid.link/20251112160708.1343355-3-seanjc%40google.com
Add a missing ':' for the description of sgx_enclave_run.reserved so that
documentation for the member is correctly generated:
WARNING: arch/x86/include/uapi/asm/sgx.h:184 struct member 'reserved' not
described in 'sgx_enclave_run'
Closes: https://lore.kernel.org/all/20251106145506.145fc620@canb.auug.org.au
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Link: https://patch.msgid.link/20251112160708.1343355-2-seanjc%40google.com
Use VOP for DMA operations performed by DRM core. Rockchip DRM driver
is backed by a virtual device that isn't IOMMU-capable, while VOP is the
actual display controller device backed by IOMMU. Fixes "swiotlb buffer
is full" warning messages originated from GEM prime code paths.
Note, that backporting is non-trivial as this depends on
commit 143ec8d3f9 ("drm/prime: Support dedicated DMA device for dma-buf
imports"), which landed in v6.16 and commit 421be3ee36 ("drm/rockchip:
Refactor IOMMU initialisation"), which landed in v5.19.
Reported-by: Daniel Stone <daniels@collabora.com>
Fixes: 2048e3286f ("drm: rockchip: Add basic drm driver")
Cc: stable@vger.kernel.org # v6.16+
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Tested-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20251022161948.199731-1-dmitry.osipenko@collabora.com
PCI/TSM sysfs for physical function 0 devices, i.e. the "DSM" (Device
Security Manager), contains the 'connect' and 'disconnect' attributes.
After a successful 'connect' operation the DSM, its dependent functions
(SR-IOV virtual functions, non-zero multi-functions, or downstream
endpoints of a switch DSM) are candidates for being transitioned into a
TDISP (TEE Device Interface Security Protocol) operational state, via
pci_tsm_bind(). At present sysfs is blind to which devices are capable of
TDISP operation and it is ambiguous which functions are serviced by which
DSMs.
Add a 'dsm' attribute to identify a function's DSM device, and add a
'bound' attribute to identify when a function has entered a TDISP
operational state.
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Samuel Ortiz <sameo@rivosinc.com>
Cc: Alexey Kardashevskiy <aik@amd.com>
Cc: Xu Yilun <yilun.xu@linux.intel.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@kernel.org>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20251113021446.436830-9-dan.j.williams@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
A PCIe device function interface assigned to a TVM is a TEE Device
Interface (TDI). A TDI instantiated by pci_tsm_bind() needs additional
steps taken by the TVM to be accepted into the TVM's Trusted Compute
Boundary (TCB) and transitioned to the RUN state.
pci_tsm_guest_req() is a channel for the guest to request TDISP collateral,
like Device Interface Reports, and effect TDISP state changes, like
LOCKED->RUN transititions. Similar to IDE establishment and pci_tsm_bind(),
these are long running operations involving SPDM message passing via the
DOE mailbox.
The path for a TVM to invoke pci_tsm_guest_req() is:
* TSM triggers exit via guest-to-host-interface ABI (implementation specific)
* VMM invokes handler (KVM handle_exit() -> userspace io)
* handler issues request (userspace io handler -> ioctl() ->
pci_tsm_guest_req())
* handler supplies response
* VMM posts response, notifies/re-enters TVM
This path is purely a transport for messages from TVM to platform TSM. By
design the host kernel does not and must not care about the content of
these messages. I.e. the host kernel is not in the TCB of the TVM.
As this is an opaque passthrough interface, similar to fwctl, the kernel
requires that implementations stay within the bounds defined by 'enum
pci_tsm_req_scope'. Violation of those expectations likely has market and
regulatory consequences. Out of scope requests are blocked by default.
Co-developed-by: Xu Yilun <yilun.xu@linux.intel.com>
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20251113021446.436830-8-dan.j.williams@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
After a PCIe device has established a secure link and session between a TEE
Security Manager (TSM) and its local Device Security Manager (DSM), the
device or its subfunctions are candidates to be bound to a private memory
context, a TVM. A PCIe device function interface assigned to a TVM is a TEE
Device Interface (TDI).
The pci_tsm_bind() requests the low-level TSM driver to associate the
device with private MMIO and private IOMMU context resources of a given TVM
represented by a @kvm argument. A device in the bound state corresponds to
the TDISP protocol LOCKED state and awaits validation by the TVM. It is a
'struct pci_tsm_link_ops' operation because, similar to IDE establishment,
it involves host side resource establishment and context setup on behalf of
the guest. It is also expected to be performed lazily to allow for
operation of the device in non-confidential "shared" context for pre-lock
configuration.
Co-developed-by: Xu Yilun <yilun.xu@linux.intel.com>
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20251113021446.436830-7-dan.j.williams@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The PCIe spec defines two types of streams - selective and link. Each
stream has an ID from the same bucket so a stream ID does not tell the
type. The spec defines an "enable" bit for every stream and required
stream IDs to be unique among all enabled stream but there is no such
requirement for disabled streams.
However, when IDE_KM is programming keys, an IDE-capable device needs
to know the type of stream being programmed to write it directly to
the hardware as keys are relatively large, possibly many of them and
devices often struggle with keeping around rather big data not being
used.
Walk through all streams on a device and initialise the IDs to some
unique number, both link and selective.
The weakest part of this proposal is the host bridge ide_stream_ids_ida.
Technically, a Stream ID only needs to be unique within a given partner
pair. However, with "anonymous" / unassigned streams there is no convenient
place to track the available ids. Proceed with an ida in the host bridge
for now, but consider moving this tracking to be an ide_stream_ids_ida per
device.
Co-developed-by: Alexey Kardashevskiy <aik@amd.com>
Signed-off-by: Alexey Kardashevskiy <aik@amd.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20251113021446.436830-6-dan.j.williams@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The address ranges for downstream Address Association Registers need to
cover memory addresses for all functions (PFs/VFs/downstream devices)
managed by a Device Security Manager (DSM). The proposed solution is get
the memory (32-bit only) range and prefetchable-memory (64-bit capable)
range from the immediate ancestor downstream port (either the direct-attach
RP or deepest switch port when switch attached).
Similar to RID association, address associations will be set by default if
hardware sets 'Number of Address Association Register Blocks' in the
'Selective IDE Stream Capability Register' to a non-zero value. TSM drivers
can opt-out of the settings by zero'ing out unwanted / unsupported address
ranges. E.g. TDX Connect only supports prefetachable (64-bit capable)
memory ranges for the Address Association setting.
If the immediate downstream port provides both a memory range and
prefetchable-memory range, but the IDE partner port only provides 1 Address
Association Register block then the TSM driver can pick which range to
associate, or let the PCI core prioritize memory.
Note, the Address Association Register setup for upstream requests is still
uncertain so is not included.
Co-developed-by: Aneesh Kumar K.V <aneesh.kumar@kernel.org>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@kernel.org>
Co-developed-by: Arto Merilainen <amerilainen@nvidia.com>
Signed-off-by: Arto Merilainen <amerilainen@nvidia.com>
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
Co-developed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20251114010227.567693-1-dan.j.williams@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Since both RK3576 and RK3588 SoCs are capable of handling 10 bpc color
depth, introduce a pair of new helpers to program the necessary
registers, as well as passing bpc at PHY configuration level.
Note max_bpc is unconditionally set to 10 before initializing the QP
bridge library, as there is no need to adjust it dynamically, i.e. per
SoC variant, for now.
While setting up .enc_init() callbacks of rockchip_hdmi_qp_ctrl_ops,
also replace the unnecessary whitespace chars before .irq_callback()
assignments.
Acked-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20251021-rk3588-10bpc-v3-5-3d3eed00a6db@collabora.com
For consistency and improved readability, redefine a few RK3576 specific
register configurations by relying on GENMASK() and unshifted values for
color depth and output format. Those are not used at the moment, but
will be needed soon to support the related features.
While at it, drop a few other defines which are unlikely to be ever
required.
Acked-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20251021-rk3588-10bpc-v3-4-3d3eed00a6db@collabora.com
Stop relying on phy_set_bus_width() based workaround to setup the TMDS
character rate and, instead, use the recently introduced HDMI PHY
configuration API. This is also a prerequisite to enable high color
depth and FRL support.
Additionally, move the logic to ->atomic_check() callback where the
current mode rate is already provided by the connector state. As a
matter of fact this is actually necessary to ensure the link rate is
configured before VOP2 attempts to use the PHY PLL as a DCLK source in
vop2_crtc_atomic_enable(). The rationale is to restrict any changes of
the PHY rate via CCF and, instead, prefer the PHY configuration API for
this purpose.
Acked-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20251021-rk3588-10bpc-v3-3-3d3eed00a6db@collabora.com
Extend struct dw_hdmi_qp_plat_data to include the supported display
output formats and maximum bits per color channel. When provided by the
platform driver, use them to setup the HDMI bridge accordingly.
Additionally, improve debug logging in dw_hdmi_qp_bridge_atomic_enable()
to also show the current HDMI output format and bpc.
Acked-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20251021-rk3588-10bpc-v3-2-3d3eed00a6db@collabora.com
When making use of the HDMI PHY PLL as a VOP2 DCLK source, it's output
rate does normally match the mode clock. But this is only applicable
for default color depth of 8 bpc. For higher depths, the output clock
is further divided by the hardware according to the formula:
output rate = PHY PLL rate * 8 / bpc
Hence there is no need for VOP2 to compensate for bpc when adjusting
DCLK, but it is required to do so when computing its maximum operating
frequency.
Take color depth into consideration before deciding to switch DCLK
source.
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20251021-rk3588-10bpc-v3-1-3d3eed00a6db@collabora.com
The DRM_DEV_ERROR() has been deprecated, and use dev_err_probe()
can be better. The other reason is that dev_err_probe() help avoid
unexpected repeated err logs during defered probing.
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20251110075817.1159857-1-damon.ding@rock-chips.com
Increase arena test coverage.
Convert glob_match() to bpf arena in two steps:
1.
Copy paste lib/glob.c into bpf_arena_strsearch.h
Copy paste lib/globtests.c into progs/arena_strsearch.c
2.
Add __arena to pointers
Add __arg_arena to global functions that accept arena pointers
Add cond_break to loops
The test also serves as a good example of what's possible
with bpf arena and how existing algorithms can be converted.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20251111032931.21430-1-alexei.starovoitov@gmail.com
The P3509 carrier board does not connect the ID GPIO. Prior to this, the
GPIO role switch driver could not detect the mode of the OTG port.
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The USB Micro-B port on p3450 is capable of OTG and doesn't need to be
hardcoded to peripheral. No other supported Tegra device is set up like
this, so align for consistency.
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The Tegra X1 chip contains a NVJPG accelerator capable of
encoding/decoding JPEG files in hardware. Complete its DT node
and enable it.
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add the NVJPG power-domain node in order to support the NVJPG
accelerator in Tegra210 platforms.
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add interrupts for Tegra234 USB wake events to support the USB wake-up
function.
Signed-off-by: Haotien Hsu <haotienh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The Tegra210 L4T bootloader RAM training will corrupt the in-RAM kernel
DT if no reserved-memory node exists. This prevents said bootloader from
being able to boot a kernel without this node, unless a chainloaded
bootloader loads the DT. Add the node to eliminate the requirement for
extra boot stages.
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The Tegra210 L4T bootloader RAM training will corrupt the in-RAM kernel
DT if no reserved-memory node exists. This prevents said bootloader from
being able to boot a kernel without this node, unless a chainloaded
bootloader loads the DT. Add the node to eliminate the requirement for
extra boot stages.
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The other engines are already enabled, finish filling out the media
engine nodes and power domains.
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The APB DMA controller node is currently named "dma@60020000", but
according to the DT bindings the node name should be "dma-controller".
Update the node name to match the binding and fix dtbs_check warnings.
Signed-off-by: Nino Zhang <ninozhang001@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add missing address-cells 0 to GIC interrupt node to silence W=1
warning:
tegra210.dtsi:31.3-41: Warning (interrupt_map): /pcie@1003000:interrupt-map:
Missing property '#address-cells' in node /interrupt-controller@50041000, using 0 as fallback
Value '0' is correct because:
1. GIC interrupt controller does not have children,
2. interrupt-map property (in PCI node) consists of five components and
the fourth component "parent unit address", which size is defined by
'#address-cells' of the node pointed to by the interrupt-parent
component, is not used (=0)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add missing address-cells 0 to GIC interrupt node to silence W=1
warning:
tegra194.dtsi:2391.4-42: Warning (interrupt_map): /bus@0/pcie@14100000:interrupt-map:
Missing property '#address-cells' in node /bus@0/interrupt-controller@3881000, using 0 as fallback
Value '0' is correct because:
1. GIC interrupt controller does not have children,
2. interrupt-map property (in PCI node) consists of five components and
the fourth component "parent unit address", which size is defined by
'#address-cells' of the node pointed to by the interrupt-parent
component, is not used (=0)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add missing address-cells 0 to GIC interrupt node to silence W=1
warning:
tegra186.dtsi:1355.3-41: Warning (interrupt_map): /pcie@10003000:interrupt-map:
Missing property '#address-cells' in node /interrupt-controller@3881000, using 0 as fallback
Value '0' is correct because:
1. GIC interrupt controller does not have children,
2. interrupt-map property (in PCI node) consists of five components and
the fourth component "parent unit address", which size is defined by
'#address-cells' of the node pointed to by the interrupt-parent
component, is not used (=0)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add missing address-cells 0 to GIC interrupt node to silence W=1
warning:
tegra132.dtsi:32.3-41: Warning (interrupt_map): /pcie@1003000:interrupt-map:
Missing property '#address-cells' in node /interrupt-controller@50041000, using 0 as fallback
Value '0' is correct because:
1. GIC interrupt controller does not have children,
2. interrupt-map property (in PCI node) consists of five components and
the fourth component "parent unit address", which size is defined by
'#address-cells' of the node pointed to by the interrupt-parent
component, is not used (=0)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
This adds OPP tables for ACTMON and EMC, enabling dynamic frequency
scaling for system memory.
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add interconnect properties to the Memory Controller, External Memory
Controller and the Display Controller nodes in order to describe the
hardware interconnection.
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
This enables the action monitor to facilitate dynamic frequency scaling.
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The name of the enable_gpio member in struct rockchip_hdmi_qp is too
generic, as initially "borrowed" from downstream BSP code. Moreover,
this hasn't been really in use so far, since there is neither a DT
providing an "enable-gpios" property to any of the "hdmi" nodes, nor a
binding documenting it.
The actual purpose of this GPIO line is to control the voltage bias for
the HDMI TX data lines when switching between TMDS and FRL operating
modes.
A previous patch introduced the "frl-enable-gpios" property of the
RK3588 HDMI TX Controller binding, hence pass the updated string to
devm_gpiod_get_optional(), rename the struct member accordingly and set
it to a low level.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20251027222641.25066-3-laurent.pinchart@ideasonboard.com
Add an optional property to RK3588 HDMI TX Controller binding describing
a GPIO line to be asserted when operating in HDMI 2.1 FRL mode and
deasserted for HDMI 1.4/2.0 TMDS.
This is used to control an external voltage bias for HDMI data lines.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Co-developed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20251027222641.25066-2-laurent.pinchart@ideasonboard.com
Bugfixes:
* Various fixes when using NFS with TLS
* Localio direct-IO fixes
* Fix error handling in nfs_atomic_open_v23()
* Fix sysfs memory leak when nfs_client kobject add fails
* Fix an incorrect parameter when calling nfs4_call_sync()
* Fix a failing LTP test when using delegated timestamps
-----BEGIN PGP SIGNATURE-----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=7pf4
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-6.18-3' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client fixes from Anna Schumaker:
- Various fixes when using NFS with TLS
- Localio direct-IO fixes
- Fix error handling in nfs_atomic_open_v23()
- Fix sysfs memory leak when nfs_client kobject add fails
- Fix an incorrect parameter when calling nfs4_call_sync()
- Fix a failing LTP test when using delegated timestamps
* tag 'nfs-for-6.18-3' of git://git.linux-nfs.org/projects/anna/linux-nfs:
NFS: Fix LTP test failures when timestamps are delegated
NFSv4: Fix an incorrect parameter when calling nfs4_call_sync()
NFS: sysfs: fix leak when nfs_client kobject add fails
NFSv2/v3: Fix error handling in nfs_atomic_open_v23()
nfs/localio: do not issue misaligned DIO out-of-order
nfs/localio: Ensure DIO WRITE's IO on stable storage upon completion
nfs/localio: backfill missing partial read support for misaligned DIO
nfs/localio: add refcounting for each iocb IO associated with NFS pgio header
nfs/localio: remove unecessary ENOTBLK handling in DIO WRITE support
NFS: Check the TLS certificate fields in nfs_match_client()
pnfs: Set transport security policy to RPC_XPRTSEC_NONE unless using TLS
pnfs: Fix TLS logic in _nfs4_pnfs_v4_ds_connect()
pnfs: Fix TLS logic in _nfs4_pnfs_v3_ds_connect()
client:
- Fix description of module parameter
panthor:
- Flush writes before mapping buffers
vmwgfx:
- Improve command validation
- Improve ref counting
- Fix cursor-plane support
amdgpu:
- Disallow P2P DMA for GC 12 DCC surfaces
- ctx error handling fix
- UserQ fixes
- VRR fix
- ISP fix
- JPEG 5.0.1 fix
amdkfd:
- Save area check fix
- Fix GPU mappings for APU after prefetch
i915:
- Fix PSR's pipe to vblank conversion
- Disable Panel Replay on MST links
xe:
- New HW workarounds affecting PTL and WCL platforms
-----BEGIN PGP SIGNATURE-----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=VOqX
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2025-11-15' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Weekly fixes, amdgpu and vmwgfx making up the most of it, along with
panthor and i915/xe.
Seems about right for this time of development, nothing major
outstanding.
client:
- Fix description of module parameter
panthor:
- Flush writes before mapping buffers
vmwgfx:
- Improve command validation
- Improve ref counting
- Fix cursor-plane support
amdgpu:
- Disallow P2P DMA for GC 12 DCC surfaces
- ctx error handling fix
- UserQ fixes
- VRR fix
- ISP fix
- JPEG 5.0.1 fix
amdkfd:
- Save area check fix
- Fix GPU mappings for APU after prefetch
i915:
- Fix PSR's pipe to vblank conversion
- Disable Panel Replay on MST links
xe:
- New HW workarounds affecting PTL and WCL platforms
* tag 'drm-fixes-2025-11-15' of https://gitlab.freedesktop.org/drm/kernel:
drm/client: fix MODULE_PARM_DESC string for "active"
drm/i915/dp_mst: Disable Panel Replay
drm/amdkfd: Fix GPU mappings for APU after prefetch
drm/amdkfd: relax checks for over allocation of save area
drm/amdgpu/jpeg: Add parse_cs for JPEG5_0_1
drm/amd/amdgpu: Ensure isp_kernel_buffer_alloc() creates a new BO
drm/amd/display: Allow VRR params change if unsynced with the stream
drm/amdgpu: fix lock warning in amdgpu_userq_fence_driver_process
drm/amdgpu: jump to the correct label on failure
drm/amdgpu: disable peer-to-peer access for DCC-enabled GC12 VRAM surfaces
drm/xe/xe3lpg: Extend Wa_15016589081 for xe3lpg
drm/xe/xe3: Extend wa_14023061436
drm/xe/xe3: Add WA_14024681466 for Xe3_LPG
drm/i915/psr: fix pipe to vblank conversion
drm/panthor: Flush shmem writes before mapping buffers CPU-uncached
drm/vmwgfx: Restore Guest-Backed only cursor plane support
drm/vmwgfx: Use kref in vmw_bo_dirty
drm/vmwgfx: Validate command header size against SVGA_CMD_MAX_DATASIZE
The error that returned by ftrace_set_filter_ip() in register_fentry() is
not handled properly. Just fix it.
Fixes: 00963a2e75 ("bpf: Support bpf_trampoline on functions with IPMODIFY (e.g. livepatch)")
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20251110120705.1553694-1-dongml2@chinatelecom.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
There are a few places where log level is not checked before calling
"verbose()". This forces programs working only at
BPF_LOG_LEVEL_STATS (e.g. veristat) to allocate unnecessarily large
log buffers. Add missing checks.
Reported-by: Emil Tsalapatis <emil@etsalapatis.com>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20251114200542.912386-1-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The current kernel doesn't handle unpopulated cgroups any special
regarding reclaim protection. Furthermore, this wasn't a case even when
this was introduced in
bf8d5d52ff ("memcg: introduce memory.min")
Drop the incorrect documentation. (Implementation taking into account
the inner-node constraint may be added later.)
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
