Writing those attributes is not supported, so mark them as read-only.
Prior to this change, attempts to write into these attributes returned
an error.
Mark boolean fields in struct pmbus_limit_attr and in struct
pmbus_sensor_attr as bit fields to reduce configuration data size.
The data is scanned only while probing, so performance is not a concern.
Fixes: 6f183d33a0 ("hwmon: (pmbus) Add support for peak attributes")
Reviewed-by: Sanman Pradhan <psanman@juniper.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
btusb_work() maps the number of active SCO links to USB alternate
settings through a three-entry lookup table when CVSD traffic uses
transparent voice settings. The lookup currently indexes alts[] with
data->sco_num - 1 without first constraining sco_num to the number of
available table entries.
While the table only defines alternate settings for up to three SCO
links, data->sco_num comes from hci_conn_num() and is used directly.
Cap the lookup to the last table entry before indexing it so the
driver keeps selecting the highest supported alternate setting without
reading past alts[].
Fixes: baac6276c0 ("Bluetooth: btusb: handle mSBC audio over USB Endpoints")
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
l2cap_config_req() processes CONFIG_REQ for channels in BT_CONNECTED
state to support L2CAP reconfiguration (e.g. MTU changes). However,
since both CONF_INPUT_DONE and CONF_OUTPUT_DONE are already set from
the initial configuration, the reconfiguration path falls through to
l2cap_ertm_init(), which re-initializes tx_q, srej_q, srej_list, and
retrans_list without freeing the previous allocations and sets
chan->sdu to NULL without freeing the existing skb. This leaks all
previously allocated ERTM resources.
Additionally, l2cap_parse_conf_req() does not validate the minimum
value of remote_mps derived from the RFC max_pdu_size option. A zero
value propagates to l2cap_segment_sdu() where pdu_len becomes zero,
causing the while loop to never terminate since len is never
decremented, exhausting all available memory.
Fix the double-init by skipping l2cap_ertm_init() and
l2cap_chan_ready() when the channel is already in BT_CONNECTED state,
while still allowing the reconfiguration parameters to be updated
through l2cap_parse_conf_req(). Also add a pdu_len zero check in
l2cap_segment_sdu() as a safeguard.
Fixes: 96298f6401 ("Bluetooth: L2CAP: handle l2cap config request during open state")
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
l2cap_conn_del() calls cancel_delayed_work_sync() for both info_timer
and id_addr_timer while holding conn->lock. However, the work functions
l2cap_info_timeout() and l2cap_conn_update_id_addr() both acquire
conn->lock, creating a potential AB-BA deadlock if the work is already
executing when l2cap_conn_del() takes the lock.
Move the work cancellations before acquiring conn->lock and use
disable_delayed_work_sync() to additionally prevent the works from
being rearmed after cancellation, consistent with the pattern used in
hci_conn_del().
Fixes: ab4eedb790 ("Bluetooth: L2CAP: Fix corrupted list in hci_chan_del")
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
btintel_hw_error() issues two __hci_cmd_sync() calls (HCI_OP_RESET
and Intel exception-info retrieval) without holding
hci_req_sync_lock(). This lets it race against
hci_dev_do_close() -> btintel_shutdown_combined(), which also runs
__hci_cmd_sync() under the same lock. When both paths manipulate
hdev->req_status/req_rsp concurrently, the close path may free the
response skb first, and the still-running hw_error path hits a
slab-use-after-free in kfree_skb().
Wrap the whole recovery sequence in hci_req_sync_lock/unlock so it
is serialized with every other synchronous HCI command issuer.
Below is the data race report and the kasan report:
BUG: data-race in __hci_cmd_sync_sk / btintel_shutdown_combined
read of hdev->req_rsp at net/bluetooth/hci_sync.c:199
by task kworker/u17:1/83:
__hci_cmd_sync_sk+0x12f2/0x1c30 net/bluetooth/hci_sync.c:200
__hci_cmd_sync+0x55/0x80 net/bluetooth/hci_sync.c:223
btintel_hw_error+0x114/0x670 drivers/bluetooth/btintel.c:254
hci_error_reset+0x348/0xa30 net/bluetooth/hci_core.c:1030
write/free by task ioctl/22580:
btintel_shutdown_combined+0xd0/0x360
drivers/bluetooth/btintel.c:3648
hci_dev_close_sync+0x9ae/0x2c10 net/bluetooth/hci_sync.c:5246
hci_dev_do_close+0x232/0x460 net/bluetooth/hci_core.c:526
BUG: KASAN: slab-use-after-free in
sk_skb_reason_drop+0x43/0x380 net/core/skbuff.c:1202
Read of size 4 at addr ffff888144a738dc
by task kworker/u17:1/83:
__hci_cmd_sync_sk+0x12f2/0x1c30 net/bluetooth/hci_sync.c:200
__hci_cmd_sync+0x55/0x80 net/bluetooth/hci_sync.c:223
btintel_hw_error+0x186/0x670 drivers/bluetooth/btintel.c:260
Fixes: 973bb97e5a ("Bluetooth: btintel: Add generic function for handling hardware errors")
Signed-off-by: Cen Zhang <zzzccc427@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When the L2CAP channel mode is L2CAP_MODE_ERTM/L2CAP_MODE_STREAMING,
l2cap_publish_rx_avail will be called and le flow credits will be sent in
l2cap_chan_rx_avail, even though the link type is ACL.
The logs in question as follows:
> ACL Data RX: Handle 129 flags 0x02 dlen 12
L2CAP: Unknown (0x16) ident 4 len 4
40 00 ed 05
< ACL Data TX: Handle 129 flags 0x00 dlen 10
L2CAP: Command Reject (0x01) ident 4 len 2
Reason: Command not understood (0x0000)
Bluetooth: Unknown BR/EDR signaling command 0x16
Bluetooth: Wrong link type (-22)
Fixes: ce60b9231b ("Bluetooth: compute LE flow credits based on recvbuf space")
Signed-off-by: Zhang Chen <zhangchen01@kylinos.cn>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tiny SRCU's srcu_gp_start_if_needed() directly calls schedule_work(),
which acquires the workqueue pool->lock.
This causes a lockdep splat when call_srcu() is called with a scheduler
lock held, due to:
call_srcu() [holding pi_lock]
srcu_gp_start_if_needed()
schedule_work() -> pool->lock
workqueue_init() / create_worker() [holding pool->lock]
wake_up_process() -> try_to_wake_up() -> pi_lock
Also add irq_work_sync() to cleanup_srcu_struct() to prevent a
use-after-free if a queued irq_work fires after cleanup begins.
Tested with rcutorture SRCU-T and no lockdep warnings.
[ Thanks to Boqun for similar fix in patch "rcu: Use an intermediate irq_work
to start process_srcu()" ]
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun@kernel.org>
Since commit c27cea4416 ("rcu: Re-implement RCU Tasks Trace in terms
of SRCU-fast") we switched to SRCU in BPF. However as BPF instrument can
happen basically everywhere (including where a scheduler lock is held),
call_srcu() now needs to avoid acquiring scheduler lock because
otherwise it could cause deadlock [1]. Fix this by following what the
previous RCU Tasks Trace did: using an irq_work to delay the queuing of
the work to start process_srcu().
[boqun: Apply Joel's feedback]
[boqun: Apply Andrea's test feedback]
Reported-by: Andrea Righi <arighi@nvidia.com>
Closes: https://lore.kernel.org/all/abjzvz_tL_siV17s@gpd4/
Fixes: commit c27cea4416 ("rcu: Re-implement RCU Tasks Trace in terms of SRCU-fast")
Link: https://lore.kernel.org/rcu/3c4c5a29-24ea-492d-aeee-e0d9605b4183@nvidia.com/ [1]
Suggested-by: Zqiang <qiang.zhang@linux.dev>
Tested-by: Andrea Righi <arighi@nvidia.com>
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Tested-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Boqun Feng <boqun@kernel.org>
When the srcutree.convert_to_big and srcutree.big_cpu_lim kernel boot
parameters specify initialization-time allocation of the srcu_node
tree for statically allocated srcu_struct structures (for example, in
DEFINE_SRCU() at build time instead of init_srcu_struct() at runtime),
init_srcu_struct_nodes() will attempt to dynamically allocate this tree
at the first run-time update-side use of this srcu_struct structure,
but while holding a raw spinlock. Because the memory allocator can
acquire non-raw spinlocks, this can result in lockdep splats.
This commit therefore uses the same SRCU_SIZE_ALLOC trick that is used
when the first run-time update-side use of this srcu_struct structure
happens before srcu_init() is called. The actual allocation then takes
place from workqueue context at the ends of upcoming SRCU grace periods.
[boqun: Adjust the sha1 of the Fixes tag]
Fixes: 175b45ed34 ("srcu: Use raw spinlocks so call_srcu() can be used under preempt_disable()")
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun@kernel.org>
Tree SRCU has used non-raw spinlocks for many years, motivated by a desire
to avoid unnecessary real-time latency and the absence of any reason to
use raw spinlocks. However, the recent use of SRCU in tracing as the
underlying implementation of RCU Tasks Trace means that call_srcu()
is invoked from preemption-disabled regions of code, which in turn
requires that any locks acquired by call_srcu() or its callees must be
raw spinlocks.
This commit therefore converts SRCU's spinlocks to raw spinlocks.
[boqun: Add Fixes tag]
Reported-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Fixes: c27cea4416 ("rcu: Re-implement RCU Tasks Trace in terms of SRCU-fast")
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun@kernel.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
This patch fixes an issue like:
where searching for the entity 'FU 11' could incorrectly match 'FU 113' first.
The driver should first perform an exact match on the full string name.
If no exact match is found, it can then fall back to a partial match.
Fixes: 48fa77af2f ("ASoC: SDCA: Add terminal type into input/output widget name")
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://patch.msgid.link/20260325110406.3232420-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
I and Qianhai are GPU R&D engineers at Loongson, specializing
in kernel driver development. We understand that the current
Loongson GPU driver lacks dedicated maintenance resources
because of some reasons.
As Loongson GPU driver developers, we have both the capability
and the responsibility to continuously maintain the Loongson
GPU driver, ensuring minimal impact on its users. After internal
discussions, our team has decided to recommend me and Qianhai
to take over the maintenance responsibilities, and recommend
Huacai, Mingcong and Ruoyao to help to review.
And We'll continue to maintain it for current supported chips
and drive future updates according to chip support plan.
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260320101012.22714-1-lvjianmin@loongson.cn
The adm1177 driver exposes the current alert threshold through
hwmon_curr_max_alarm. This violates the hwmon sysfs ABI, where
*_alarm attributes are read-only status flags and writable thresholds
must use currN_max.
The driver also stores the threshold internally in microamps, while
currN_max is defined in milliamps. Convert the threshold accordingly
on both the read and write paths.
Widen the cached threshold and related calculations to 64 bits so
that small shunt resistor values do not cause truncation or overflow.
Also use 64-bit arithmetic for the mA/uA conversions, clamp writes
to the range the hardware can represent, and propagate failures from
adm1177_write_alert_thr() instead of silently ignoring them.
Update the hwmon documentation to reflect the attribute rename and
the correct units returned by the driver.
Fixes: 09b08ac9e8 ("hwmon: (adm1177) Add ADM1177 Hot Swap Controller and Digital Power Monitor driver")
Signed-off-by: Sanman Pradhan <psanman@juniper.net>
Acked-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20260325051246.28262-1-sanman.pradhan@hpe.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The number of the initialization table may exceed 2048.
Therefore, this patch removes the limitation and allows the driver to
allocate memory dynamically based on the size of the initialization table.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260325092017.3221640-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
During 3D workload, user is reporting hitting:
[ 413.361679] WARNING: drivers/gpu/drm/xe/xe_vm.c:1217 at vm_bind_ioctl_ops_unwind+0x1e2/0x2e0 [xe], CPU#7: vkd3d_queue/9925
[ 413.361944] CPU: 7 UID: 1000 PID: 9925 Comm: vkd3d_queue Kdump: loaded Not tainted 7.0.0-070000rc3-generic #202603090038 PREEMPT(lazy)
[ 413.361949] RIP: 0010:vm_bind_ioctl_ops_unwind+0x1e2/0x2e0 [xe]
[ 413.362074] RSP: 0018:ffffd4c25c3df930 EFLAGS: 00010282
[ 413.362077] RAX: 0000000000000000 RBX: ffff8f3ee817ed10 RCX: 0000000000000000
[ 413.362078] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
[ 413.362079] RBP: ffffd4c25c3df980 R08: 0000000000000000 R09: 0000000000000000
[ 413.362081] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8f41fbf99380
[ 413.362082] R13: ffff8f3ee817e968 R14: 00000000ffffffef R15: ffff8f43d00bd380
[ 413.362083] FS: 00000001040ff6c0(0000) GS:ffff8f4696d89000(0000) knlGS:00000000330b0000
[ 413.362085] CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033
[ 413.362086] CR2: 00007ddfc4747000 CR3: 00000002e6262005 CR4: 0000000000f72ef0
[ 413.362088] PKRU: 55555554
[ 413.362089] Call Trace:
[ 413.362092] <TASK>
[ 413.362096] xe_vm_bind_ioctl+0xa9a/0xc60 [xe]
Which seems to hint that the vma we are re-inserting for the ops unwind
is either invalid or overlapping with something already inserted in the
vm. It shouldn't be invalid since this is a re-insertion, so must have
worked before. Leaving the likely culprit as something already placed
where we want to insert the vma.
Following from that, for the case where we do something like a rebind in
the middle of a vma, and one or both mapped ends are already compatible,
we skip doing the rebind of those vma and set next/prev to NULL. As well
as then adjust the original unmap va range, to avoid unmapping the ends.
However, if we trigger the unwind path, we end up with three va, with
the two ends never being removed and the original va range in the middle
still being the shrunken size.
If this occurs, one failure mode is when another unwind op needs to
interact with that range, which can happen with a vector of binds. For
example, if we need to re-insert something in place of the original va.
In this case the va is still the shrunken version, so when removing it
and then doing a re-insert it can overlap with the ends, which were
never removed, triggering a warning like above, plus leaving the vm in a
bad state.
With that, we need two things here:
1) Stop nuking the prev/next tracking for the skip cases. Instead
relying on checking for skip prev/next, where needed. That way on the
unwind path, we now correctly remove both ends.
2) Undo the unmap va shrinkage, on the unwind path. With the two ends
now removed the unmap va should expand back to the original size again,
before re-insertion.
v2:
- Update the explanation in the commit message, based on an actual IGT of
triggering this issue, rather than conjecture.
- Also undo the unmap shrinkage, for the skip case. With the two ends
now removed, the original unmap va range should expand back to the
original range.
v3:
- Track the old start/range separately. vma_size/start() uses the va
info directly.
Link: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/7602
Fixes: 8f33b4f054 ("drm/xe: Avoid doing rebinds")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <stable@vger.kernel.org> # v6.8+
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260318100208.78097-2-matthew.auld@intel.com
(cherry picked from commit aec6969f75)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The xarray conversion blindly and wrongly replaced idr_alloc with xa_alloc
and kept the GFP_NOWAIT. It should have been GFP_KERNEL to account for
idr_preload it removed. Fix it.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Fixes: fec2c3c01f ("drm/syncobj: Convert syncobj idr to xarray")
Reported-by: Himanshu Girotra <himanshu.girotra@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Himanshu Girotra <himanshu.girotra@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://lore.kernel.org/r/20260324111019.22467-1-tvrtko.ursulin@igalia.com
Under an UML build for an upcoming series [1], I got `-Wstatic-in-inline`
for `dma_free_attrs`:
BINDGEN rust/bindings/bindings_generated.rs - due to target missing
In file included from rust/helpers/helpers.c:59:
rust/helpers/dma.c:17:2: warning: static function 'dma_free_attrs' is used in an inline function with external linkage [-Wstatic-in-inline]
17 | dma_free_attrs(dev, size, cpu_addr, dma_handle, attrs);
| ^
rust/helpers/dma.c:12:1: note: use 'static' to give inline function 'rust_helper_dma_free_attrs' internal linkage
12 | __rust_helper void rust_helper_dma_free_attrs(struct device *dev, size_t size,
| ^
| static
The issue is that `dma_free_attrs` was not marked `inline` when it was
introduced alongside the rest of the stubs.
Thus mark it.
Fixes: ed6ccf10f2 ("dma-mapping: properly stub out the DMA API for !CONFIG_HAS_DMA")
Closes: https://lore.kernel.org/rust-for-linux/20260322194616.89847-1-ojeda@kernel.org/ [1]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20260325015548.70912-1-ojeda@kernel.org
If auxiliary_device_add() fails, add_adev() jumps to add_fail and calls
auxiliary_device_uninit(adev).
The auxiliary device has its release callback set to adev_release(),
which frees the containing struct mana_adev. Since adev is embedded in
struct mana_adev, the subsequent fall-through to init_fail and access
to adev->id may result in a use-after-free.
Fix this by saving the allocated auxiliary device id in a local
variable before calling auxiliary_device_add(), and use that saved id
in the cleanup path after auxiliary_device_uninit().
Fixes: a69839d432 ("net: mana: Add support for auxiliary device")
Cc: stable@vger.kernel.org
Reviewed-by: Long Li <longli@microsoft.com>
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Link: https://patch.msgid.link/20260323165730.945365-1-lgs201920130244@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When codel_dequeue() finds an empty queue, it resets vars->dropping
but does not reset vars->first_above_time. The reference CoDel
algorithm (Nichols & Jacobson, ACM Queue 2012) resets both:
dodeque_result codel_queue_t::dodeque(time_t now) {
...
if (r.p == NULL) {
first_above_time = 0; // <-- Linux omits this
}
...
}
Note that codel_should_drop() does reset first_above_time when called
with a NULL skb, but codel_dequeue() returns early before ever calling
codel_should_drop() in the empty-queue case. The post-drop code paths
do reach codel_should_drop(NULL) and correctly reset the timer, so a
dropped packet breaks the cycle -- but the next delivered packet
re-arms first_above_time and the cycle repeats.
For sparse flows such as ICMP ping (one packet every 200ms-1s), the
first packet arms first_above_time, the flow goes empty, and the
second packet arrives after the interval has elapsed and gets dropped.
The pattern repeats, producing sustained loss on flows that are not
actually congested.
Test: veth pair, fq_codel, BQL disabled, 30000 iptables rules in the
consumer namespace (NAPI-64 cycle ~14ms, well above fq_codel's 5ms
target), ping at 5 pps under UDP flood:
Before fix: 26% ping packet loss
After fix: 0% ping packet loss
Fix by resetting first_above_time to zero in the empty-queue path
of codel_dequeue(), matching the reference algorithm.
Fixes: 76e3cc126b ("codel: Controlled Delay AQM")
Fixes: d068ca2ae2 ("codel: split into multiple files")
Co-developed-by: Jesper Dangaard Brouer <hawk@kernel.org>
Signed-off-by: Jesper Dangaard Brouer <hawk@kernel.org>
Signed-off-by: Jonas Köppeler <j.koeppeler@tu-berlin.de>
Reported-by: Chris Arges <carges@cloudflare.com>
Tested-by: Jonas Köppeler <j.koeppeler@tu-berlin.de>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/all/20260318134826.1281205-7-hawk@kernel.org/
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260323174920.253526-1-hawk@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 6b57ff21a3 ("rtnetlink: Protect link_ops by mutex.") swapped
the EEXIST check with the init_srcu_struct, but didn't add cleanup of
the SRCU struct we just allocated in case of error.
Fixes: 6b57ff21a3 ("rtnetlink: Protect link_ops by mutex.")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/e77fe499f9a58c547b33b5212b3596dad417cec6.1774025341.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The driver does not explicitly configure the MAC duplex mode when
bringing the link up. As a result, the MAC may retain a stale duplex
setting from a previous link state, leading to duplex mismatches with
the link partner and degraded network performance.
Update lan743x_phylink_mac_link_up() to set or clear the MAC_CR_DPX_
bit according to the negotiated duplex mode.
This ensures the MAC configuration is consistent with the phylink
resolved state.
Fixes: a5f199a8d8 ("net: lan743x: Migrate phylib to phylink")
Signed-off-by: Thangaraj Samynathan <thangaraj.s@microchip.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20260323065345.144915-1-thangaraj.s@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A UAF issue occurs when the virtio_net driver is configured with napi_tx=N
and the device's IFF_XMIT_DST_RELEASE flag is cleared
(e.g., during the configuration of tc route filter rules).
When IFF_XMIT_DST_RELEASE is removed from the net_device, the network stack
expects the driver to hold the reference to skb->dst until the packet
is fully transmitted and freed. In virtio_net with napi_tx=N,
skbs may remain in the virtio transmit ring for an extended period.
If the network namespace is destroyed while these skbs are still pending,
the corresponding dst_ops structure has freed. When a subsequent packet
is transmitted, free_old_xmit() is triggered to clean up old skbs.
It then calls dst_release() on the skb associated with the stale dst_entry.
Since the dst_ops (referenced by the dst_entry) has already been freed,
a UAF kernel paging request occurs.
fix it by adds skb_dst_drop(skb) in start_xmit to explicitly release
the dst reference before the skb is queued in virtio_net.
Call Trace:
Unable to handle kernel paging request at virtual address ffff80007e150000
CPU: 2 UID: 0 PID: 6236 Comm: ping Kdump: loaded Not tainted 7.0.0-rc1+ #6 PREEMPT
...
percpu_counter_add_batch+0x3c/0x158 lib/percpu_counter.c:98 (P)
dst_release+0xe0/0x110 net/core/dst.c:177
skb_release_head_state+0xe8/0x108 net/core/skbuff.c:1177
sk_skb_reason_drop+0x54/0x2d8 net/core/skbuff.c:1255
dev_kfree_skb_any_reason+0x64/0x78 net/core/dev.c:3469
napi_consume_skb+0x1c4/0x3a0 net/core/skbuff.c:1527
__free_old_xmit+0x164/0x230 drivers/net/virtio_net.c:611 [virtio_net]
free_old_xmit drivers/net/virtio_net.c:1081 [virtio_net]
start_xmit+0x7c/0x530 drivers/net/virtio_net.c:3329 [virtio_net]
...
Reproduction Steps:
NETDEV="enp3s0"
config_qdisc_route_filter() {
tc qdisc del dev $NETDEV root
tc qdisc add dev $NETDEV root handle 1: prio
tc filter add dev $NETDEV parent 1:0 \
protocol ip prio 100 route to 100 flowid 1:1
ip route add 192.168.1.100/32 dev $NETDEV realm 100
}
test_ns() {
ip netns add testns
ip link set $NETDEV netns testns
ip netns exec testns ifconfig $NETDEV 10.0.32.46/24
ip netns exec testns ping -c 1 10.0.32.1
ip netns del testns
}
config_qdisc_route_filter
test_ns
sleep 2
test_ns
Fixes: f2fc6a5458 ("[NETNS][IPV6] route6 - move ip6_dst_ops inside the network namespace")
Cc: stable@vger.kernel.org
Signed-off-by: xietangxin <xietangxin@yeah.net>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Fixes: 0287587884 ("net: better IFF_XMIT_DST_RELEASE support")
Link: https://patch.msgid.link/20260312025406.15641-1-xietangxin@yeah.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, .fadvise() doesn't work well if page cache sharing is on
since shared inodes belong to a pseudo fs generated with init_pseudo(),
and sb->s_bdi is the default one &noop_backing_dev_info.
Then, generic_fadvise() will just behave as a no-op if sb->s_bdi is
&noop_backing_dev_info, but as the bdev fs (the bdev fs changes
inode_to_bdi() instead), it's actually NOT a pure memfs.
Let's generate a real bdi for erofs_ishare_mnt instead.
Fixes: d86d7817c0 ("erofs: implement .fadvise for page cache share")
Reviewed-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
- Fix typo to ensure .builtin-dtbs.S is properly cleaned
- Fix '==' bashism in scripts/kconfig/merge_config.sh
- Fix awk error in scripts/kconfig/merge_config.sh when base
configuration is empty
- Fix inconsistent indentation in scripts/kconfig/merge_config.sh
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR74yXHMTGczQHYypIdayaRccAalgUCacL9RwAKCRAdayaRccAa
lnpJAP9h7iW5/MGjLt8ErvH0a5CrHEZRqJUEqQfJa1haYa6gxwD+NnREu4V5YetJ
xVoqHLpD/A26xGCmkuMxWasZ156LOQY=
=8CH+
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-7.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux
Pull Kbuild fixes from Nathan Chancellor:
"This mostly addresses some issues with the awk conversion in
scripts/kconfig/merge_config.sh.
- Fix typo to ensure .builtin-dtbs.S is properly cleaned
- Fix '==' bashism in scripts/kconfig/merge_config.sh
- Fix awk error in scripts/kconfig/merge_config.sh when base
configuration is empty
- Fix inconsistent indentation in scripts/kconfig/merge_config.sh"
* tag 'kbuild-fixes-7.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux:
scripts: kconfig: merge_config.sh: fix indentation
scripts: kconfig: merge_config.sh: pass output file as awk variable
scripts: kconfig: merge_config.sh: fix unexpected operator warning
kbuild: Delete .builtin-dtbs.S when running make clean
alarm_timer_forward() passes arguments to alarm_forward() in the wrong
order:
alarm_forward(alarm, timr->it_interval, now);
However, alarm_forward() is defined as:
u64 alarm_forward(struct alarm *alarm, ktime_t now, ktime_t interval);
and uses the second argument as the current time:
delta = ktime_sub(now, alarm->node.expires);
Passing the interval as "now" results in incorrect delta computation,
which can lead to missed expirations or incorrect overrun accounting.
This issue has been present since the introduction of
alarm_timer_forward().
Fix this by swapping the arguments.
Fixes: e7561f1633 ("alarmtimer: Implement forward callback")
Signed-off-by: Zhan Xusheng <zhanxusheng@xiaomi.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260323061130.29991-1-zhanxusheng@xiaomi.com
- Clear the pending exception state from a vcpu coming out of
reset, as it could otherwise affect the first instruction
executed in the guest.
- Fix pointer arithmetic in address translation emulation, so that the
Hardware Access bit is set on the correct PTE instead of some other
location.
s390:
- Fix deadlock in new memory management.
- Properly handle kernel faults on donated memory.
- Fix bounds checking for irq routing, with selftest.
- Fix invalid machine checks and log all of them.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmnCvYAUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroO6Kgf9EobmY4mWv8EmGiLQqsdtShzaSDa+
cvzoWT8OEECFlZzWLCn/9/FiF68IkNfoV5ad79+2vJ5um+ZlJtkjtq6z8EbvhBBZ
/QppVas+gmqhctuR41GnDxSKReXNEKIfQ1qwxAEujriui4FEpHAza+yRQ8jHJCCN
LpcwO7dubHWe+HJewF0t7P6MN76Ln6EJWS2tu/zQUBpKKAvLHkm2EHk38X+vwGlN
Lip9tcCYgzZXKdHZgTKKm45Te0ijpi/gxZ0j0kn6FNBkY8PIbtwlB2Hl8H6J5jP1
q+0dLlzFiAK5ww9Wrf5/LAt9vFcZKyOTY1y3ADEvdfLLwVBNdhaZ318Myw==
=Zd43
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Clear the pending exception state from a vcpu coming out of reset,
as it could otherwise affect the first instruction executed in the
guest
- Fix pointer arithmetic in address translation emulation, so that
the Hardware Access bit is set on the correct PTE instead of some
other location
s390:
- Fix deadlock in new memory management
- Properly handle kernel faults on donated memory
- Fix bounds checking for irq routing, with selftest
- Fix invalid machine checks and log all of them"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: arm64: Fix the descriptor address in __kvm_at_swap_desc()
KVM: s390: vsie: Avoid injecting machine check on signal
KVM: s390: log machine checks more aggressively
KVM: s390: selftests: Add IRQ routing address offset tests
KVM: s390: Limit adapter indicator access to mapped page
s390/mm: Add missing secure storage access fixups for donated memory
KVM: arm64: Discard PC update state on vcpu reset
KVM: s390: Fix a deadlock
Add LANDLOCK_RESTRICT_SELF_TSYNC to the backwards compatibility example
for restrict flags. This introduces completeness, similar to that of
the ruleset attributes example. However, as the new example can impact
enforcement in certain cases, an appropriate warning is also included.
Additionally, I modified the two comments of the example to make them
more consistent with the ruleset attributes example's.
Signed-off-by: Panagiotis "Ivory" Vasilopoulos <git@n0toose.net>
Co-developed-by: Dan Cojocaru <dan@dcdev.ro>
Signed-off-by: Dan Cojocaru <dan@dcdev.ro>
Reviewed-by: Günther Noack <gnoack@google.com>
Link: https://lore.kernel.org/r/20260304-landlock-docs-add-tsync-example-v4-1-819a276f05c5@n0toose.net
[mic: Update date, improve comments consistency, fix newline issue]
Signed-off-by: Mickaël Salaün <mic@digikod.net>
cxl: Adjust the startup priority of cxl_pmem to be higher than that of cxl_acpi
cxl/mbox: Use proper endpoint validity check upon sanitize
cxl/hdm: Avoid incorrect DVSEC fallback when HDM decoders are enabled
cxl/acpi: Fix CXL_ACPI and CXL_PMEM Kconfig tristate mismatch
cxl/region: Fix leakage in __construct_region()
cxl/port: Fix use after free of parent_port in cxl_detach_ep()
-----BEGIN PGP SIGNATURE-----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=ct8z
-----END PGP SIGNATURE-----
Merge tag 'cxl-fixes-7.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull Compute Express Link (CXL) fixes from Dave Jiang:
- Adjust the startup priority of cxl_pmem to be higher than that of
cxl_acpi
- Use proper endpoint validity check upon sanitize
- Avoid incorrect DVSEC fallback when HDM decoders are enabled
- Fix CXL_ACPI and CXL_PMEM Kconfig tristate mismatch
- Fix leakage in __construct_region()
- Fix use after free of parent_port in cxl_detach_ep()
* tag 'cxl-fixes-7.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl: Adjust the startup priority of cxl_pmem to be higher than that of cxl_acpi
cxl/mbox: Use proper endpoint validity check upon sanitize
cxl/hdm: Avoid incorrect DVSEC fallback when HDM decoders are enabled
cxl/acpi: Fix CXL_ACPI and CXL_PMEM Kconfig tristate mismatch
cxl/region: Fix leakage in __construct_region()
cxl/port: Fix use after free of parent_port in cxl_detach_ep()
The slider offset can be set via debugfs for balanced mode. The offset
should be only applicable in balanced mode. For other modes, it should
be 0 when writing to MMIO offset,
Fixes: 8306bcaba0 ("thermal: intel: int340x: Add module parameter to change slider offset")
Tested-by: Erin Park <erin.park@intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: 6.18+ <stable@vger.kernel.org> # 6.18+
[ rjw: Subject and changelog tweaks ]
Link: https://patch.msgid.link/20260324172346.3317145-1-srinivas.pandruvada@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
LVDS does not use an HPD pin so it may be invalid. Handle
this case correctly in link encoder creation.
Fixes: 7c8fb3b8e9 ("drm/amd/display: Add hpd_source index check for DCE60/80/100/110/112/120 link encoders")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/5012
Cc: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Cc: Roman Li <roman.li@amd.com>
Reviewed-by: Roman Li <roman.li@amd.com>
Reviewed-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3b5620f7ee)
Cc: stable@vger.kernel.org
During a GPU page fault, the driver restores the SVM range and then maps it
into the GPU page tables. The current implementation passes a GPU-page-size
(4K-based) PFN to svm_range_restore_pages() to restore the range.
SVM ranges are tracked using system-page-size PFNs. On systems where the
system page size is larger than 4K, using GPU-page-size PFNs to restore the
range causes two problems:
Range lookup fails:
Because the restore function receives PFNs in GPU (4K) units, the SVM
range lookup does not find the existing range. This will result in a
duplicate SVM range being created.
VMA lookup failure:
The restore function also tries to locate the VMA for the faulting address.
It converts the GPU-page-size PFN into an address using the system page
size, which results in an incorrect address on non-4K page-size systems.
As a result, the VMA lookup fails with the message: "address 0xxxx VMA is
removed".
This patch passes the system-page-size PFN to svm_range_restore_pages() so
that the SVM range is restored correctly on non-4K page systems.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Donet Tom <donettom@linux.ibm.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 074fe395fb)
Forcibly disable the OD_FAN_CURVE feature when temperature or PWM range is invalid,
otherwise PMFW will reject this configuration on smu v14.0.2/14.0.3.
example:
$ sudo cat /sys/bus/pci/devices/<BDF>/gpu_od/fan_ctrl/fan_curve
OD_FAN_CURVE:
0: 0C 0%
1: 0C 0%
2: 0C 0%
3: 0C 0%
4: 0C 0%
OD_RANGE:
FAN_CURVE(hotspot temp): 0C 0C
FAN_CURVE(fan speed): 0% 0%
$ echo "0 50 40" | sudo tee fan_curve
kernel log:
[ 969.761627] amdgpu 0000:03:00.0: amdgpu: Fan curve temp setting(50) must be within [0, 0]!
[ 1010.897800] amdgpu 0000:03:00.0: amdgpu: Fan curve temp setting(50) must be within [0, 0]!
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit ab4905d466)
Cc: stable@vger.kernel.org
In kfd_ioctl_create_process(), the pointer 'p' is used before checking
if it is NULL.
The code accesses p->context_id before validating 'p'. This can lead
to a possible NULL pointer dereference.
Move the NULL check before using 'p' so that the pointer is validated
before access.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_chardev.c:3177 kfd_ioctl_create_process() warn: variable dereferenced before check 'p' (see line 3174)
Fixes: cc6b66d661 ("amdkfd: introduce new ioctl AMDKFD_IOC_CREATE_PROCESS")
Cc: Zhu Lingshan <lingshan.zhu@amd.com>
Cc: Felix Kuehling <felix.kuehling@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 19d4149b22)
LVDS connectors don't have extended backlight caps so check
if the pointer is valid before accessing it.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/5012
Fixes: 1454642960 ("drm/amd: Re-introduce property to control adaptive backlight modulation")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3f797396d7)
Cc: stable@vger.kernel.org
amdgpu_amdkfd_submit_ib() submits a GPU job and gets a fence
from amdgpu_ib_schedule(). This fence is used to wait for job
completion.
Currently, the code drops the fence reference using dma_fence_put()
before calling dma_fence_wait().
If dma_fence_put() releases the last reference, the fence may be
freed before dma_fence_wait() is called. This can lead to a
use-after-free.
Fix this by waiting on the fence first and releasing the reference
only after dma_fence_wait() completes.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.c:697 amdgpu_amdkfd_submit_ib() warn: passing freed memory 'f' (line 696)
Fixes: 9ae55f030d ("drm/amdgpu: Follow up change to previous drm scheduler change.")
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 8b9e5259ad)
When ec_install_handlers() returns -EPROBE_DEFER on reduced-hardware
platforms, it has already started the EC and installed the address
space handler with the struct acpi_ec pointer as handler context.
However, acpi_ec_setup() propagates the error without any cleanup.
The caller acpi_ec_add() then frees the struct acpi_ec for non-boot
instances, leaving a dangling handler context in ACPICA.
Any subsequent AML evaluation that accesses an EC OpRegion field
dispatches into acpi_ec_space_handler() with the freed pointer,
causing a use-after-free:
BUG: KASAN: slab-use-after-free in mutex_lock (kernel/locking/mutex.c:289)
Write of size 8 at addr ffff88800721de38 by task init/1
Call Trace:
<TASK>
mutex_lock (kernel/locking/mutex.c:289)
acpi_ec_space_handler (drivers/acpi/ec.c:1362)
acpi_ev_address_space_dispatch (drivers/acpi/acpica/evregion.c:293)
acpi_ex_access_region (drivers/acpi/acpica/exfldio.c:246)
acpi_ex_field_datum_io (drivers/acpi/acpica/exfldio.c:509)
acpi_ex_extract_from_field (drivers/acpi/acpica/exfldio.c:700)
acpi_ex_read_data_from_field (drivers/acpi/acpica/exfield.c:327)
acpi_ex_resolve_node_to_value (drivers/acpi/acpica/exresolv.c:392)
</TASK>
Allocated by task 1:
acpi_ec_alloc (drivers/acpi/ec.c:1424)
acpi_ec_add (drivers/acpi/ec.c:1692)
Freed by task 1:
kfree (mm/slub.c:6876)
acpi_ec_add (drivers/acpi/ec.c:1751)
The bug triggers on reduced-hardware EC platforms (ec->gpe < 0)
when the GPIO IRQ provider defers probing. Once the stale handler
exists, any unprivileged sysfs read that causes AML to touch an
EC OpRegion (battery, thermal, backlight) exercises the dangling
pointer.
Fix this by calling ec_remove_handlers() in the error path of
acpi_ec_setup() before clearing first_ec. ec_remove_handlers()
checks each EC_FLAGS_* bit before acting, so it is safe to call
regardless of how far ec_install_handlers() progressed:
-ENODEV (handler not installed): only calls acpi_ec_stop()
-EPROBE_DEFER (handler installed): removes handler, stops EC
Fixes: 03e9a0e057 ("ACPI: EC: Consolidate event handler installation code")
Reported-by: Xiang Mei <xmei5@asu.edu>
Signed-off-by: Weiming Shi <bestswngs@gmail.com>
Link: https://patch.msgid.link/20260324165458.1337233-2-bestswngs@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Clear the pending exception state from a vcpu coming out of
reset, as it could otherwise affect the first instruction
executed in the guest.
- Fix the address translation emulation icode to set the Hardware
Access bit on the correct PTE instead of some other location.
-----BEGIN PGP SIGNATURE-----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=bU28
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-7.0-4' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 7.0, take #4
- Clear the pending exception state from a vcpu coming out of
reset, as it could otherwise affect the first instruction
executed in the guest.
- Fix the address translation emulation icode to set the Hardware
Access bit on the correct PTE instead of some other location.
All are singletons - please see the changelogs for details.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCacHhYgAKCRDdBJ7gKXxA
jqnKAPwLWHOazW6WB43goV605aA42anjBRm8kHg7E36X53OUJgD+L8KV2IXeDzGE
cFe9TxqtdhYg6/JRiwEE5eDYT/uWaAk=
=G0UF
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2026-03-23-17-56' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM fixes from Andrew Morton:
"6 hotfixes. 2 are cc:stable. All are for MM.
All are singletons - please see the changelogs for details"
* tag 'mm-hotfixes-stable-2026-03-23-17-56' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/damon/stat: monitor all System RAM resources
mm/zswap: add missing kunmap_local()
mailmap: update email address for Muhammad Usama Anjum
zram: do not slot_free() written-back slots
mm/damon/core: avoid use of half-online-committed context
mm/rmap: clear vma->anon_vma on error
Refine the description to better highlight its features and use cases.
In addition, add instructions for building it as a module and clarify
the compression option.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
o Fix parsing 'overwrite' in command line event definitions in
big-endian machines by writing correct union member.
o Fix finding default metric in 'perf stat'.
o Fix relative paths for including headers in 'perf kvm stat'.
o Sync header copies with the kernel sources: msr-index.h, kvm,
build_bug.h.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
--
2.53.0
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCacEV4gAKCRCyPKLppCJ+
J9bOAP9TD92nGe4Za4wBVTggTkRxqCuW7gIs3BKP+l9v80kyRwEA1NE3K2O/8MwB
7puBlYkK/VJ9Yrl0cU9eX3vOzCc7lAQ=
=BMqk
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-fixes-for-v7.0-2-2026-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix parsing 'overwrite' in command line event definitions in
big-endian machines by writing correct union member
- Fix finding default metric in 'perf stat'
- Fix relative paths for including headers in 'perf kvm stat'
- Sync header copies with the kernel sources: msr-index.h, kvm,
build_bug.h
* tag 'perf-tools-fixes-for-v7.0-2-2026-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
tools headers: Synchronize linux/build_bug.h with the kernel sources
tools headers UAPI: Sync x86's asm/kvm.h with the kernel sources
tools headers UAPI: Sync linux/kvm.h with the kernel sources
tools arch x86: Sync the msr-index.h copy with the kernel sources
perf kvm stat: Fix relative paths for including headers
perf parse-events: Fix big-endian 'overwrite' by writing correct union member
perf metricgroup: Fix metricgroup__has_metric_or_groups()
tools headers: Skip arm64 cputype.h check
The implicit FILEID_INO32_GEN encoder was changed to be explicit,
so we need to fix the detection.
When mounting overlayfs with upperdir and lowerdir on different ext4
filesystems, the expected kmsg log is:
overlayfs: "xino" feature enabled using 32 upper inode bits.
But instead, since the regressing commit, the kmsg log was:
overlayfs: "xino" feature enabled using 2 upper inode bits.
Fixes: e21fc2038c ("exportfs: make ->encode_fh() a mandatory method for NFS export")
Cc: stable@vger.kernel.org # v6.7+
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
When a driver is probed through __driver_attach(), the bus' match()
callback is called without the device lock held, thus accessing the
driver_override field without a lock, which can cause a UAF.
Fix this by using the driver-core driver_override infrastructure taking
care of proper locking internally.
Note that calling match() from __driver_attach() without the device lock
held is intentional. [1]
Also note that we do not enable the driver_override feature of struct
bus_type, as SPI - in contrast to most other buses - passes "" to
sysfs_emit() when the driver_override pointer is NULL. Thus, printing
"\n" instead of "(null)\n".
Link: https://lore.kernel.org/driver-core/DGRGTIRHA62X.3RY09D9SOK77P@kernel.org/ [1]
Reported-by: Gui-Dong Han <hanguidong02@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220789
Fixes: 5039563e7c ("spi: Add driver_override SPI device attribute")
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patch.msgid.link/20260324005919.2408620-12-dakr@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
cputemp_is_visible() validates the channel index against
CPUTEMP_CHANNEL_NUMS, but currently uses '>' instead of '>='.
As a result, channel == CPUTEMP_CHANNEL_NUMS is not rejected even though
valid indices are 0 .. CPUTEMP_CHANNEL_NUMS - 1.
Fix the bounds check by using '>=' so invalid channel indices are
rejected before indexing the core bitmap.
Fixes: bf3608f338 ("hwmon: peci: Add cputemp driver")
Cc: stable@vger.kernel.org
Signed-off-by: Sanman Pradhan <psanman@juniper.net>
Link: https://lore.kernel.org/r/20260323002352.93417-3-sanman.pradhan@hpe.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The hwmon sysfs ABI expects tempN_crit_hyst to report the temperature at
which the critical condition clears, not the hysteresis delta from the
critical limit.
The peci cputemp driver currently returns tjmax - tcontrol for
crit_hyst_type, which is the hysteresis margin rather than the
corresponding absolute temperature.
Return tcontrol directly, and update the documentation accordingly.
Fixes: bf3608f338 ("hwmon: peci: Add cputemp driver")
Cc: stable@vger.kernel.org
Signed-off-by: Sanman Pradhan <psanman@juniper.net>
Link: https://lore.kernel.org/r/20260323002352.93417-2-sanman.pradhan@hpe.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The custom avs0_enable and avs1_enable sysfs attributes access PMBus
registers through the exported API helpers (pmbus_read_byte_data,
pmbus_read_word_data, pmbus_write_word_data, pmbus_update_byte_data)
without holding the PMBus update_lock mutex. These exported helpers do
not acquire the mutex internally, unlike the core's internal callers
which hold the lock before invoking them.
The store callback is especially vulnerable: it performs a multi-step
read-modify-write sequence (read VOUT_COMMAND, write VOUT_COMMAND, then
update OPERATION) where concurrent access from another thread could
interleave and corrupt the register state.
Add pmbus_lock_interruptible()/pmbus_unlock() around both the show and
store callbacks to serialize PMBus register access with the rest of the
driver.
Fixes: 038a9c3d1e ("hwmon: (pmbus/isl68137) Add driver for Intersil ISL68137 PWM Controller")
Cc: stable@vger.kernel.org
Signed-off-by: Sanman Pradhan <psanman@juniper.net>
Link: https://lore.kernel.org/r/20260319173055.125271-3-sanman.pradhan@hpe.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
ina233_read_word_data() reads MFR_READ_VSHUNT via pmbus_read_word_data()
but has two issues:
1. The return value is not checked for errors before being used in
arithmetic. A negative error code from a failed I2C transaction is
passed directly to DIV_ROUND_CLOSEST(), producing garbage data.
2. MFR_READ_VSHUNT is a 16-bit two's complement value. Negative shunt
voltages (values with bit 15 set) are treated as large positive
values since pmbus_read_word_data() returns them zero-extended in an
int. This leads to incorrect scaling in the VIN coefficient
conversion.
Fix both issues by adding an error check, casting to s16 for proper
sign extension, and clamping the result to a valid non-negative range.
The clamp is necessary because read_word_data callbacks must return
non-negative values on success (negative values indicate errors to the
pmbus core).
Fixes: b64b6cb163 ("hwmon: Add driver for TI INA233 Current and Power Monitor")
Cc: stable@vger.kernel.org
Signed-off-by: Sanman Pradhan <psanman@juniper.net>
Link: https://lore.kernel.org/r/20260319173055.125271-2-sanman.pradhan@hpe.com
[groeck: Fixed clamp to avoid losing the sign bit]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-----BEGIN PGP SIGNATURE-----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=E39n
-----END PGP SIGNATURE-----
Merge tag 'ipsec-2026-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2026-03-23
1) Add missing extack for XFRMA_SA_PCPU in add_acquire and allocspi.
From Sabrina Dubroca.
2) Fix the condition on x->pcpu_num in xfrm_sa_len by using the
proper check. From Sabrina Dubroca.
3) Call xdo_dev_state_delete during state update to properly cleanup
the xdo device state. From Sabrina Dubroca.
4) Fix a potential skb leak in espintcp when async crypto is used.
From Sabrina Dubroca.
5) Validate inner IPv4 header length in IPTFS payload to avoid
parsing malformed packets. From Roshan Kumar.
6) Fix skb_put() panic on non-linear skb during IPTFS reassembly.
From Fernando Fernandez Mancera.
7) Silence various sparse warnings related to RCU, state, and policy
handling. From Sabrina Dubroca.
8) Fix work re-schedule race after cancel in xfrm_nat_keepalive_net_fini().
From Hyunwoo Kim.
9) Prevent policy_hthresh.work from racing with netns teardown by using
a proper cleanup mechanism. From Minwoo Ra.
10) Validate that the family of the source and destination addresses match
in pfkey_send_migrate(). From Eric Dumazet.
11) Only publish mode_data after the clone is setup in the IPTFS receive path.
This prevents leaving x->mode_data pointing at freed memory on error.
From Paul Moses.
Please pull or let me know if there are problems.
ipsec-2026-03-23
* tag 'ipsec-2026-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
xfrm: iptfs: only publish mode_data after clone setup
af_key: validate families in pfkey_send_migrate()
xfrm: prevent policy_hthresh.work from racing with netns teardown
xfrm: Fix work re-schedule after cancel in xfrm_nat_keepalive_net_fini()
xfrm: avoid RCU warnings around the per-netns netlink socket
xfrm: add rcu_access_pointer to silence sparse warning for xfrm_input_afinfo
xfrm: policy: silence sparse warning in xfrm_policy_unregister_afinfo
xfrm: policy: fix sparse warnings in xfrm_policy_{init,fini}
xfrm: state: silence sparse warnings during netns exit
xfrm: remove rcu/state_hold from xfrm_state_lookup_spi_proto
xfrm: state: add xfrm_state_deref_prot to state_by* walk under lock
xfrm: state: fix sparse warnings around XFRM_STATE_INSERT
xfrm: state: fix sparse warnings in xfrm_state_init
xfrm: state: fix sparse warnings on xfrm_state_hold_rcu
xfrm: iptfs: fix skb_put() panic on non-linear skb during reassembly
xfrm: iptfs: validate inner IPv4 header length in IPTFS payload
esp: fix skb leak with espintcp and async crypto
xfrm: call xdo_dev_state_delete during state update
xfrm: fix the condition on x->pcpu_num in xfrm_sa_len
xfrm: add missing extack for XFRMA_SA_PCPU in add_acquire and allocspi
====================
Link: https://patch.msgid.link/20260323083440.2741292-1-steffen.klassert@secunet.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The hardware teams noticed that the originally documented workaround
steps for Wa_16025250150 may not be sufficient to fully avoid a hardware
issue. The workaround documentation has been augmented to suggest
programming one additional register; make the corresponding change in
the driver.
Fixes: 7654d51f1f ("drm/xe/xe2hpg: Add Wa_16025250150")
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patch.msgid.link/20260319-wa_16025250150_part2-v1-1-46b1de1a31b2@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit a31566762d)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
