folio_nr_pages() is a faster helper function to get the number of pages when
NR_PAGES_IN_LARGE_FOLIO is enabled.
Signed-off-by: Pedro Demarchi Gomes <pedrodemargomes@gmail.com>
Link: https://lore.kernel.org/r/20251004030210.49080-1-pedrodemargomes@gmail.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Remove redundant initialization of gmem in __kvm_gmem_get_pfn() as it is
already initialized at the top of the function.
No functional change intended.
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Shivank Garg <shivankg@amd.com>
Link: https://lore.kernel.org/r/20251012071607.17646-2-shivankg@amd.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Move kvm_gmem_get_index() to the top of the file so that it can be used
in kvm_gmem_prepare_folio() to replace the open-coded calculation.
No functional change intended.
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Shivank Garg <shivankg@amd.com>
Link: https://lore.kernel.org/r/20251012071607.17646-1-shivankg@amd.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
KVM guest_memfd wants to implement support for NUMA policies just like
shmem already does using the shared policy infrastructure. As
guest_memfd currently resides in KVM module code, we have to export the
relevant symbols.
In the future, guest_memfd might be moved to core-mm, at which point the
symbols no longer would have to be exported. When/if that happens is
still unclear.
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Shivank Garg <shivankg@amd.com>
Tested-by: Ashish Kalra <ashish.kalra@amd.com>
Link: https://lore.kernel.org/r/20250827175247.83322-6-shivankg@amd.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Extend __filemap_get_folio() to support NUMA memory policies by
renaming the implementation to __filemap_get_folio_mpol() and adding
a mempolicy parameter. The original function becomes a static inline
wrapper that passes NULL for the mempolicy.
This infrastructure will enable future support for NUMA-aware page cache
allocations in guest_memfd memory backend KVM guests.
Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Shivank Garg <shivankg@amd.com>
Tested-by: Ashish Kalra <ashish.kalra@amd.com>
Link: https://lore.kernel.org/r/20250827175247.83322-5-shivankg@amd.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add a mempolicy parameter to filemap_alloc_folio() to enable NUMA-aware
page cache allocations. This will be used by upcoming changes to
support NUMA policies in guest-memfd, where guest_memory need to be
allocated NUMA policy specified by VMM.
All existing users pass NULL maintaining current behavior.
Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Shivank Garg <shivankg@amd.com>
Tested-by: Ashish Kalra <ashish.kalra@amd.com>
Link: https://lore.kernel.org/r/20250827175247.83322-4-shivankg@amd.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Request-based devices (dm-multipath) queue I/O in blk-mq on noflush
suspends. Any queued IO will make it impossible to freeze the queue. If
a process attempts to update the queue limits while there is queued IO,
it can be get stuck holding the limits lock, while unable to freeze the
queue. If device-mapper then attempts to update the limits during a
table swap, it will deadlock trying to grab the limits lock while making
it impossible to flush the IO.
Disallow updating the queue limits during a table swap, when updating an
immutable request-based dm device (dm-multipath) during a noflush
suspend. It is userspace's responsibility to make sure that the new
table uses the same limits as the existing table if it asks for a
noflush suspend.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Replace sprintf()+strlen() with sysfs_emit(), the preferred helper for
sysfs show() routines. sysfs_emit() returns the number of bytes written,
guarantees NUL-termination, and clamps to PAGE_SIZE-1.
Reference: Documentation/filesystems/sysfs.rst.
No functional change intended.
Signed-off-by: Vivek BalachandharTN <vivek.balachandhar@gmail.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
md->nr_zones is no longer used for anything. Remove it.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
folio_nr_pages() is a faster helper function to get the number of pages when
NR_PAGES_IN_LARGE_FOLIO is enabled.
Signed-off-by: Pedro Demarchi Gomes <pedrodemargomes@gmail.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
The lmk IV mode, which dm-crypt supports for Loop-AES compatibility,
involves an MD5 computation. Update its implementation to use the MD5
library API instead of crypto_shash. This has many benefits, such as:
- Simpler code. Notably, much of the error-handling code is no longer
needed, since the library functions can't fail.
- Reduced stack usage. crypt_iv_lmk_one() now allocates only 112 bytes
on the stack instead of 520 bytes.
- The library functions are strongly typed, preventing bugs like
https://lore.kernel.org/r/f1625ddc-e82e-4b77-80c2-dc8e45b54848@gmail.com
- Slightly improved performance, as the library provides direct access
to the MD5 code without unnecessary overhead such as indirect calls.
To preserve the existing behavior of lmk support being disabled when the
kernel is booted with "fips=1", make crypt_iv_lmk_ctr() check
fips_enabled itself. Previously it relied on crypto_alloc_shash("md5")
failing. (I don't know for sure that lmk *actually* needs to be
disallowed in FIPS mode; this just preserves the existing behavior.)
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
7.43 has been assigned twice, make
KVM_CAP_ARM_CACHEABLE_PFNMAP_SUPPORTED 7.44.
Fixes: f55ce5a6cd ("KVM: arm64: Expose new KVM cap for cacheable PFNMAP")
Reviewed-by: Ankit Agrawal <ankita@nvidia.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Replace sprintf() with snprintf() when formatting debug names to prevent
potential buffer overflow. The debug_name buffer is 16 bytes, and while
unlikely to overflow with current PIDs, using snprintf() provides proper
bounds checking.
Signed-off-by: Josephine Pfeiffer <hi@josie.lol>
[frankja@linux.ibm.com: Fixed subject prefix]
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Enable the HDMI output on the Debix SOM A board, using the HDMI encoder
present in the i.MX8MP SoC.
Enable and configure all nodes required for the HDMI port usage.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add USB vbus regulators to silence the following kernel warnings:
usb_phy_generic usbphynop1: dummy supplies not allowed for exclusive requests (id=vbus)
usb_phy_generic usbphynop2: dummy supplies not allowed for exclusive requests (id=vbus)
Because generic USB PHY driver requires exclusive vbus regulators since
commit 75fd6485cc ("usb: phy: generic: Get the vbus supply").
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add USB vbus regulators to silence the following kernel warnings:
usb_phy_generic usbphynop1: dummy supplies not allowed for exclusive requests (id=vbus)
usb_phy_generic usbphynop2: dummy supplies not allowed for exclusive requests (id=vbus)
Because generic USB PHY driver requires exclusive vbus regulators since
commit 75fd6485cc ("usb: phy: generic: Get the vbus supply").
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
MicIn is connected to IN3_L. Add routing including the Mic Bias.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Rename the 'ssi2' and 'aud3' nodes to 'mux-ssi2' and 'mux-aud3' in the
audmux configuration of imx51-zii-rdu1.dts to comply with the naming
convention in imx-audmux.yaml.
This fixes the following dt-schema warning:
imx51-zii-rdu1.dtb: audmux@83fd0000 (fsl,imx51-audmux): 'aud3', 'ssi2'
do not match any of the regexes: '^mux-[0-9a-z]*$', '^pinctrl-[0-9]+$'
Fixes: ceef0396f3 ("ARM: dts: imx: add ZII RDU1 board")
Signed-off-by: Jihed Chaibi <jihed.chaibi.dev@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
When returning from read_config_rom() function, the allocated buffer and
the previous buffer for configuration ROM should be released. The cleanup
function is useful in the case.
This commit uses the cleanup function to remove goto statements.
Link: https://lore.kernel.org/r/20251020115810.92839-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
The 'report-rate-hz' property for the edt-ft5x06 driver was added and
handled in the Linux kernel by me with patches [1] and [2] for this
specific board.
The v1 upstream version, which was the one applied to the customer's
kernel, used the 'report-rate' property, which was written directly to
the controller register. During review, the 'hz' suffix was added,
changing its handling so that writing the value directly to the register
was no longer possible for the M06 controller.
Once the patches were accepted in mainline, I did not reapply them to
the customer's kernel, and when upstreaming the DTS for this board, I
forgot to correct the 'report-rate-hz' property value.
The property must be set to 60 because this board uses the M06 controller,
which expects the report rate in units of 10 Hz, meaning the actual value
written to the register is 6.
[1] 625f829586 ("dt-bindings: input: touchscreen: edt-ft5x06: add report-rate-hz")
[2] 5bcee83a40 ("Input: edt-ft5x06 - set report rate by dts property")
Fixes: ffea3cac94 ("ARM: dts: imx6ul: support Engicam MicroGEA RMM board")
Co-developed-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
avoid use after free
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQM3A3Pv7vbm9vtjWbacY7uyt+OfQUCaPTWCwAKCRDacY7uyt+O
fe8OAPwIMTLxMw8cyUeq/KbJ50MTDXS1UzY9CdIpNnzISqKXYgD/VauVxGNUVcum
VnVrx4AkvKTiyRPRBtPh5GliFYPezQ0=
=4SdH
-----END PGP SIGNATURE-----
Merge tag 'iwlwifi-fixes-2025-10-19' of https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
Miri Korenblit says:
====================
iwlwifi fix
avoid use after free
====================
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
On i.MX6Q/6DL the following subnodes exist to describe the CSI port muxing:
- ipu1_csi0_mux
- ipu1_csi1_mux
- ipu2_csi0_mux
- ipu2_csi1_mux
As they were not documented, dt-schema emits warnings like:
'ipu1_csi0_mux', 'ipu1_csi1_mux' do not match any of the regexes:
'^pinctrl-[0-9]+$'
Add a top-level patternProperties entry for these CSI mux subnodes
and restrict it to i.MX6Q.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Coverity is unhappy because we may leak old_radio_rts_threshold. Since
this pointer is only valid in the context of the function and kfree is
NULL pointer safe, don't check and just call kfree.
Note that somehow, we were checking old_rts_threshold to free
old_radio_rts_threshold which is a bit odd.
Fixes: 264637941c ("wifi: cfg80211: Add Support to Set RTS Threshold for each Radio")
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20251020075745.44168-1-emmanuel.grumbach@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
For keys added by ieee80211_gtk_rekey_add(), we assume that
they're already present in the hardware and set the flag
KEY_FLAG_UPLOADED_TO_HARDWARE. However, setting this flag
needs to be paired with decrementing the tailroom needed,
which was missed.
Fixes: f52a0b408e ("wifi: mac80211: mark keys as uploaded when added by the driver")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20251019115358.c88eafb4083e.I69e9d4d78a756a133668c55b5570cf15a4b0e6a4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, whenever there is a need to transmit an Action frame,
the brcmfmac driver always uses the P2P vif to send the "actframe" IOVAR to
firmware. The P2P interfaces were available when wpa_supplicant is managing
the wlan interface.
However, the P2P interfaces are not created/initialized when only hostapd
is managing the wlan interface. And if hostapd receives an ANQP Query REQ
Action frame even from an un-associated STA, the brcmfmac driver tries
to use an uninitialized P2P vif pointer for sending the IOVAR to firmware.
This NULL pointer dereferencing triggers a driver crash.
[ 1417.074538] Unable to handle kernel NULL pointer dereference at virtual
address 0000000000000000
[...]
[ 1417.075188] Hardware name: Raspberry Pi 4 Model B Rev 1.5 (DT)
[...]
[ 1417.075653] Call trace:
[ 1417.075662] brcmf_p2p_send_action_frame+0x23c/0xc58 [brcmfmac]
[ 1417.075738] brcmf_cfg80211_mgmt_tx+0x304/0x5c0 [brcmfmac]
[ 1417.075810] cfg80211_mlme_mgmt_tx+0x1b0/0x428 [cfg80211]
[ 1417.076067] nl80211_tx_mgmt+0x238/0x388 [cfg80211]
[ 1417.076281] genl_family_rcv_msg_doit+0xe0/0x158
[ 1417.076302] genl_rcv_msg+0x220/0x2a0
[ 1417.076317] netlink_rcv_skb+0x68/0x140
[ 1417.076330] genl_rcv+0x40/0x60
[ 1417.076343] netlink_unicast+0x330/0x3b8
[ 1417.076357] netlink_sendmsg+0x19c/0x3f8
[ 1417.076370] __sock_sendmsg+0x64/0xc0
[ 1417.076391] ____sys_sendmsg+0x268/0x2a0
[ 1417.076408] ___sys_sendmsg+0xb8/0x118
[ 1417.076427] __sys_sendmsg+0x90/0xf8
[ 1417.076445] __arm64_sys_sendmsg+0x2c/0x40
[ 1417.076465] invoke_syscall+0x50/0x120
[ 1417.076486] el0_svc_common.constprop.0+0x48/0xf0
[ 1417.076506] do_el0_svc+0x24/0x38
[ 1417.076525] el0_svc+0x30/0x100
[ 1417.076548] el0t_64_sync_handler+0x100/0x130
[ 1417.076569] el0t_64_sync+0x190/0x198
[ 1417.076589] Code: f9401e80 aa1603e2 f9403be1 5280e483 (f9400000)
Fix this, by always using the vif corresponding to the wdev on which the
Action frame Transmission request was initiated by the userspace. This way,
even if P2P vif is not available, the IOVAR is sent to firmware on AP vif
and the ANQP Query RESP Action frame is transmitted without crashing the
driver.
Move init_completion() for "send_af_done" from brcmf_p2p_create_p2pdev()
to brcmf_p2p_attach(). Because the former function would not get executed
when only hostapd is managing wlan interface, and it is not safe to do
reinit_completion() later in brcmf_p2p_tx_action_frame(), without any prior
init_completion().
And in the brcmf_p2p_tx_action_frame() function, the condition check for
P2P Presence response frame is not needed, since the wpa_supplicant is
properly sending the P2P Presense Response frame on the P2P-GO vif instead
of the P2P-Device vif.
Cc: stable@vger.kernel.org
Fixes: 18e2f61db3 ("brcmfmac: P2P action frame tx")
Signed-off-by: Gokul Sivakumar <gokulkumar.sivakumar@infineon.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20251013102819.9727-1-gokulkumar.sivakumar@infineon.com
[Cc stable]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The wcn36xx is a wireless device but doesn't have the wireless
list in its MAINTAINERS entry.
Add it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Acked-by: Jeff Johnson <jjohnson@kernel.org>
Link: https://patch.msgid.link/20251010235735.350638-1-linux@treblig.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fix memory leaks in both ath10k and ath12k.
Fix a sparse issue in ath11k.
Allow ath11k suspend/resume to work on more Lenovo laptops.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ/mtSHzPUi16IfDEksFbugiYzLewUCaOP3kgAKCRAsFbugiYzL
e78OAQCqH7y72lC0A3xLKki3TA/FIKUnn/lzcT4/MdmPBd+fVgEAmg1+tuG8IfnP
5nX0j5/7jPKl3Y25hbZaN8x00PFQYAo=
=oByO
-----END PGP SIGNATURE-----
Merge tag 'ath-current-20251006' of git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath
Jeff Johnson says:
==================
ath.git update for v6.18-rc1
Fix memory leaks in both ath10k and ath12k.
Fix a sparse issue in ath11k.
Allow ath11k suspend/resume to work on more Lenovo laptops.
==================
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Some bus devices can be marked as disabled for specific SoCs or models.
Those should not be registered to avoid probing them.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20251003125126.27950-1-zajec5@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When ieee80211_stop_ap() deletes the FILS discovery and unsolicited
broadcast probe response templates, the associated interval values
are not reset. This can lead to drivers subsequently operating with
the non-zero values, leading to unexpected behavior.
Trigger repeated retrieval attempts of the FILS discovery template in
ath12k, resulting in excessive log messages such as:
mac vdev 0 failed to retrieve FILS discovery template
mac vdev 4 failed to retrieve FILS discovery template
Fix this by resetting the intervals in ieee80211_stop_ap() to ensure
proper cleanup of FILS discovery and unsolicited broadcast probe
response templates.
Fixes: 295b02c4be ("mac80211: Add FILS discovery support")
Fixes: 632189a018 ("mac80211: Unsolicited broadcast probe response support")
Signed-off-by: Aloka Dixit <aloka.dixit@oss.qualcomm.com>
Signed-off-by: Aaradhana Sahu <aaradhana.sahu@oss.qualcomm.com>
Link: https://patch.msgid.link/20250924130014.2575533-1-aaradhana.sahu@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmj1jhQeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGUdkH/2Op7+8+0Km+ytfk
5vhTAxg0TSCIxrlauUGKgilcye4hmROsorreRmtVi0Pzp6e+B0kp11tC5kRzgQLp
mVSKm5C41uBmpn9JphHSYSsTxprJClPIqGcOgXp0jLhvKu7JXdVFWAZDYYXGqLrV
+oWIjEms7KC+UBi5b3GYl/5Fr8zxU+v+iD96rd4xqxs8RpJs4Z5iynUpayZLDReR
sse6twmSmnQUo/Fs6fHpabfZ/ZWw13wzd5XD1nE05EiMrOjO3+UmDyDNes9QP/Pn
sRgfb8KUrhkEdgLcNJ0BcYszneKyS2+p0vyyJLEF/LsQCcv8rK74aTMxNRfvlz/c
7yz+fPI=
=qtmW
-----END PGP SIGNATURE-----
Merge tag 'v6.18-rc2' into 'drm-rust-next'
When pushing commits to drm-rust-next, we need to verify that the
patches pass rustfmt. Thus, pull in v6.18-rc2 for its rustfmt fix.
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Instead of manually deferring cleanup of vm_bos, use the new GPUVM
infrastructure for doing so.
To avoid manual management of vm_bo refcounts, the panthor_vma_link()
and panthor_vma_unlink() methods are changed to get and put a vm_bo
refcount on the vm_bo. This simplifies the code a lot. I preserved the
behavior where panthor_gpuva_sm_step_map() drops the refcount right away
rather than letting panthor_vm_cleanup_op_ctx() do it later.
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://lore.kernel.org/r/20251006-vmbo-defer-v4-2-30cbd2c05adb@google.com
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
When using GPUVM in immediate mode, it is necessary to call
drm_gpuvm_unlink() from the fence signalling critical path. However,
unlink may call drm_gpuvm_bo_put(), which causes some challenges:
1. drm_gpuvm_bo_put() often requires you to take resv locks, which you
can't do from the fence signalling critical path.
2. drm_gpuvm_bo_put() calls drm_gem_object_put(), which is often going
to be unsafe to call from the fence signalling critical path.
To solve these issues, add a deferred version of drm_gpuvm_unlink() that
adds the vm_bo to a deferred cleanup list, and then clean it up later.
The new methods take the GEMs GPUVA lock internally rather than letting
the caller do it because it also needs to perform an operation after
releasing the mutex again. This is to prevent freeing the GEM while
holding the mutex (more info as comments in the patch). This means that
the new methods can only be used with DRM_GPUVM_IMMEDIATE_MODE.
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20251006-vmbo-defer-v4-1-30cbd2c05adb@google.com
[aliceryhl: fix formatting of vm_bo = llist_entry(...) line]
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Radxa E20C provides one of its GbE ports through RTL8111H connected to
SoC's PCIe controller. Let's enable the controller and the PHY used by
it to allow usage of the port.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Link: https://patch.msgid.link/20250918153057.56023-4-ziyao@disroot.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Describes the PCIe Gen2x1 controller integrated in RK3528 SoC. The SoC
doesn't provide a separate MSI controller, thus the one integrated in
designware PCIe IP must be used.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://patch.msgid.link/20250918153057.56023-3-ziyao@disroot.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The callbacks in enabled_monitors_seq_ops are inconsistent. Some treat the
iterator as struct rv_monitor *, while others treat the iterator as struct
list_head *.
This causes a wrong type cast and crashes the system as reported by Nathan.
Convert everything to use struct list_head * as iterator. This also makes
enabled_monitors consistent with available_monitors.
Fixes: de090d1cca ("rv: Fix wrong type cast in enabled_monitors_next()")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Closes: https://lore.kernel.org/linux-trace-kernel/20250923002004.GA2836051@ax162/
Signed-off-by: Nam Cao <namcao@linutronix.de>
Cc: stable@vger.kernel.org
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Link: https://lore.kernel.org/r/20251002082235.973099-1-namcao@linutronix.de
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Implement TryInto<IrqRequest<'a>> for IrqVector<'a> to directly convert
a pci::IrqVector into a generic IrqRequest, instead of taking the
indirection via an unrelated pci::Device method.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Add DDR Perf Monitor for i.MX94.
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This board is similar to the already upstream
imx8mp-skov-recv-tian-g07017.dts but uses a different 10" panel with a
different touch controller.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
In preparation for adding a new device tree variant with a different
panel, describe the DT compatible in the binding.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Replace verbatim license text with a `SPDX-License-Identifier`.
The comment header mis-attributes this license to be "X11", but the
license text does not include the last line "Except as contained in this
notice, the name of the X Consortium shall not be used in advertising or
otherwise to promote the sale, use or other dealings in this Software
without prior written authorization from the X Consortium.". Therefore,
this license is actually equivalent to the SPDX "MIT" license (confirmed
by text diffing).
Cc: Andrej Rosano <andrej@inversepath.com>
Signed-off-by: Bence Csókás <csokas.bence@prolan.hu>
Acked-by: Andrej Rosano <andrej.rosano@reversec.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The mass production lx2160 rev2 use designware PCIe Controller. Old Rev1
which use mobivel PCIe controller was not supported. Although uboot
fixup can change compatible string fsl,lx2160a-pcie to fsl,ls2088a-pcie
since 2019, it is quite confused and should correctly reflect hardware
status in dtb. Change freescale's board to use rev2's dtsi firstly.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
kvm_arch_vcpu_ioctl_set_fpu() always returns 0 and the local return
variable 'ret' is not used anymore. Remove it.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Since we are no longer switching from a BSCA to a ESCA we can completely
get rid of the sca_lock. The write lock was only taken for that
conversion.
After removal of the lock some local code cleanups are possible.
Signed-off-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Suggested-by: Janosch Frank <frankja@linux.ibm.com>
[frankja@linux.ibm.com: Added suggested-by tag as discussed on list]
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
All modern IBM Z and Linux One machines do offer support for the
Extended System Control Area (ESCA). The ESCA is available since the
z114/z196 released in 2010.
KVM needs to allocate and manage the SCA for guest VMs. Prior to this
change the SCA was setup as Basic SCA only supporting a maximum of 64
vCPUs when initializing the VM. With addition of the 65th vCPU the SCA
was needed to be converted to a ESCA.
Instead of allocating a BSCA and upgrading it for PV or when adding the
65th cpu we can always allocate the ESCA directly upon VM creation
simplifying the code in multiple places as well as completely removing
the need to convert an existing SCA.
In cases where the ESCA is not supported (z10 and earlier) the use of
the SCA entries and with that SIGP interpretation are disabled for VMs.
This increases the number of exits from the VM in multiprocessor
scenarios and thus decreases performance.
The same is true for VSIE where SIGP is currently disabled and thus no
SCA entries are used.
The only downside of the change is that we will always allocate 4 pages
for a 248 cpu ESCA instead of a single page for the BSCA per VM.
In return we can delete a bunch of checks and special handling depending
on the SCA type as well as the whole BSCA to ESCA conversion.
With that behavior change we are no longer referencing a bsca_block in
kvm->arch.sca. This will always be esca_block instead.
By specifying the type of the sca as esca_block we can simplify access
to the sca and get rid of some helpers while making the code clearer.
KVM_MAX_VCPUS is also moved to kvm_host_types to allow using this in
future type definitions.
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
In the main loop of mvebu_gpio_irq_handler() some calls to
irq_find_mapping() can be saved.
There is no point to find an irq number before checking if this something
has to be done.
By testing first, some calls can be saved.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/7190f5def0489ed3f40435449c86cd7c710e6dd4.1760862679.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Add support for module reset handling on the RZ/T2H SoC. Unlike earlier
CPG/MSSR variants, RZ/T2H uses a unified set of Module Reset Control
Registers (MRCR) where both reset and deassert actions are done via
read-modify-write (RMW) to the same register.
Introduce a new MRCR offset table (mrcr_for_rzt2h) for RZ/T2H and assign
it to reset_regs. For this SoC, the number of resets is based on the
number of MRCR registers rather than the number of module clocks. Also
add cpg_mrcr_reset_ops to implement reset, assert, and deassert using RMW
while holding the spinlock. This follows the RZ/T2H requirements, where
processing after releasing a module reset must be secured by performing
seven dummy reads of the same register, and where a module that is reset
and released again must ensure the target bit in the Module Reset Control
Register is set to 1.
Update the reset controller registration to select cpg_mrcr_reset_ops for
RZ/T2H, while keeping the existing cpg_mssr_reset_ops for other SoCs.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patch.msgid.link/20250929112324.3622148-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The %pe format specifier is designed to print error pointers. It prints
a symbolic error name (eg. -EINVAL) and it makes the code simpler by
omitting PTR_ERR()
This patch fixes this cocci report:
./platform/renesas/rcar_fdp1.c:2303:4-11: WARNING: Consider using %pe to print PTR_ERR()
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
