Implement the required functionality, as written in
Documentation/networking/switchdev.rst section "Bridge VLAN filtering",
by using the "VLAN Ingress Tag Rule" feature of the switch.
The bit field definitions for this were found while browsing the Intel
dual BSD/GPLv2 licensed drivers for this switch IP.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/787aa807d00b726d75db2a40add215c8b8ba7466.1760566491.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
"bool pvid" is unused since commit "net: dsa: lantiq_gswip: remove
legacy configure_vlan_while_not_filtering option".
"bool vlan_aware" shouldn't have a role in finding the bridge VLAN.
It should be identified by VID regardless of VLAN-aware or VLAN-unaware.
The driver sets up VID 0 for the VLAN-unaware PVID.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/c63f89ca19269ef6c8bf00a62cacc739164b4441.1760566491.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
User space can force the altering of VID 0 as it was privately set up by
this driver.
For example, when the port joins a VLAN-aware bridge,
dsa_user_manage_vlan_filtering() will set NETIF_F_HW_VLAN_CTAG_FILTER.
If the port is subsequently brought up and CONFIG_VLAN_8021Q is enabled,
the vlan_vid0_add() function will want to make sure we are capable of
accepting packets tagged with VID 0.
Generally, DSA/switchdev drivers want to suppress that bit of help from
the 8021q layer, and handle VID 0 filters themselves. The 8021q layer
might actually be even detrimential, because VLANs added through
vlan_vid_add() pass through dsa_user_vlan_rx_add_vid(), which is
documented as this:
/* This API only allows programming tagged, non-PVID VIDs */
.flags = 0,
so it will force VID 0 to be reconfigured as egress-tagged, non-PVID.
Whereas the driver configures it as PVID and egress-untagged, the exact
opposite.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/9f68340c34b5312c3b8c6c7ecf3cfce574a3f65d.1760566491.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The driver should now tolerate these changes, now that the PVID is
automatically recalculated on a VLAN awareness state change.
The VLAN-unaware PVID must be installed to hardware even if the
joined bridge is currently VLAN-aware. Otherwise, when the bridge VLAN
filtering state dynamically changes to VLAN-unaware later, this PVID
will be missing.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/c58759074fb699581336dc2c2c6bf106257b134e.1760566491.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This driver doesn't support dynamic VLAN filtering changes, for simplicity.
It expects that on a port, either gswip_vlan_add_unaware() or
gswip_vlan_add_aware() is called, but not both.
When !br_vlan_enabled(), the configure_vlan_while_not_filtering = false
option is exactly what will prevent calls to gswip_port_vlan_add() from
being issued by DSA.
In fact, at the time these features were submitted:
https://patchwork.ozlabs.org/project/netdev/patch/20190501204506.21579-3-hauke@hauke-m.de/
"configure_vlan_while_not_filtering = false" did not even have a name,
it was implicit behaviour. It only became legacy in commit 54a0ed0df4
("net: dsa: provide an option for drivers to always receive bridge
VLANs").
Section "Bridge VLAN filtering" of Documentation/networking/switchdev.rst
describes the exact set of rules. Notably, the PVID of the port must
follow the VLAN awareness state of the bridge port. A VLAN-unaware
bridge port should not respond to the addition of a bridge VLAN with the
PVID flag. In fact, the pvid_change() test in
tools/testing/selftests/net/forwarding/bridge_vlan_unaware.sh tests
exactly this.
The lantiq_gswip driver indeed does not respond to the addition of PVID
VLANs while VLAN-unaware in the way described above, but only because of
configure_vlan_while_not_filtering. Our purpose here is to get rid of
configure_vlan_while_not_filtering, so we must add more complex logic
which follows the VLAN awareness state and walks through the Active VLAN
table entries, to find the index of the PVID register that should be
committed to hardware on each port.
As a side-effect of now having a proper implementation to assign the
PVID all the "VLAN upper: ..." tests of the local_termination.sh self-
tests which would previously all FAIL now all PASS (or XFAIL, but
that's ok).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Tested-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/47dab8a8b69ebb92624b9795b723114475d3fe4e.1760566491.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The two functions largely duplicate functionality. The differences
consist in:
- the "fid" passed to gswip_vlan_active_create(). The unaware variant
always passes -1, the aware variant passes fid = priv->vlans[i].fid,
where i is an index into priv->vlans[] for which priv->vlans[i].bridge
is equal to the given bridge.
- the "vid" is not passed to gswip_vlan_add_unaware(). It is implicitly
GSWIP_VLAN_UNAWARE_PVID (zero).
- The "untagged" is not passed to gswip_vlan_add_unaware(). It is
implicitly true. Also, the CPU port must not be a tag member of the
PVID used for VLAN-unaware bridging.
- The "pvid" is not passed to gswip_vlan_add_unaware(). It is implicitly
true.
- The GSWIP_PCE_DEFPVID(port) register is written by the aware variant
with an "idx", but with a hardcoded 0 by the unaware variant.
Merge the two functions into a single unified function without any
functional changes.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/2be190701d4c17038ce4b8047f9fb0bdf8abdf6e.1760566491.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When idx == -1 in gswip_vlan_add(), we set vlan_mapping.val[0] = vid,
even though we do the exact same thing again outside the if/else block.
Remove the duplicate assignment.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/039ecb48e038cea856a9a6230ad1543db2bc382d.1760566491.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, the driver takes the bridge from dsa_port_bridge_dev_get(),
which only works for user ports. This is why it has to ignore FDB
entries installed on the CPU port.
Commit c26933639b ("net: dsa: request drivers to perform FDB
isolation") introduced the possibility of getting the originating bridge
from the passed dsa_db argument, so let's do that instead. This way, we
can act on the local FDB entries coming from the bridge.
Note that we do not expect FDB events for the DSA_DB_PORT database,
because this driver doesn't fulfill the dsa_switch_supports_uc_filtering()
requirements. So we can just return -EOPNOTSUPP and expect it will never
be triggered.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/ed9d847c0356f0fec81422bdad9ebdcc6a59da79.1760566491.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ6NaUOruQGUkvPdG4raS+Z+3y5EwUCaPFVxwAKCRAraS+Z+3y5
E1yDAP98nxKLBFb9auLj8AV1zUNl4lKEpOIhH7ceXaDT7ucsagEAwvSbGAN5sun/
M0+sOpKEZwF8JBoRU8L61uYPYSu7XAk=
=2K9O
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Martin KaFai Lau says:
====================
pull-request: bpf-next 2025-10-16
We've added 6 non-merge commits during the last 1 day(s) which contain
a total of 18 files changed, 577 insertions(+), 38 deletions(-).
The main changes are:
1) Bypass the global per-protocol memory accounting either by setting
a netns sysctl or using bpf_setsockopt in a bpf program,
from Kuniyuki Iwashima.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
selftests/bpf: Add test for sk->sk_bypass_prot_mem.
bpf: Introduce SK_BPF_BYPASS_PROT_MEM.
bpf: Support bpf_setsockopt() for BPF_CGROUP_INET_SOCK_CREATE.
net: Introduce net.core.bypass_prot_mem sysctl.
net: Allow opt-out from global protocol memory accounting.
tcp: Save lock_sock() for memcg in inet_csk_accept().
====================
Link: https://patch.msgid.link/20251016204539.773707-1-martin.lau@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Make tcp-md5 use the MD5 library API (added in 6.18) instead of the
crypto_ahash API. This is much simpler and also more efficient:
- The library API just operates on struct md5_ctx. Just allocate this
struct on the stack instead of using a pool of pre-allocated
crypto_ahash and ahash_request objects.
- The library API accepts standard pointers and doesn't require
scatterlists. So, for hashing the headers just use an on-stack buffer
instead of a pool of pre-allocated kmalloc'ed scratch buffers.
- The library API never fails. Therefore, checking for MD5 hashing
errors is no longer necessary. Update tcp_v4_md5_hash_skb(),
tcp_v6_md5_hash_skb(), tcp_v4_md5_hash_hdr(), tcp_v6_md5_hash_hdr(),
tcp_md5_hash_key(), tcp_sock_af_ops::calc_md5_hash, and
tcp_request_sock_ops::calc_md5_hash to return void instead of int.
- The library API provides direct access to the MD5 code, eliminating
unnecessary overhead such as indirect function calls and scatterlist
management. Microbenchmarks of tcp_v4_md5_hash_skb() on x86_64 show a
speedup from 7518 to 7041 cycles (6% fewer) with skb->len == 1440, or
from 1020 to 678 cycles (33% fewer) with skb->len == 140.
Since tcp_sigpool_hash_skb_data() can no longer be used, add a function
tcp_md5_hash_skb_data() which is specialized to MD5. Of course, to the
extent that this duplicates any code, it's well worth it.
To preserve the existing behavior of TCP-MD5 support being disabled when
the kernel is booted with "fips=1", make tcp_md5_do_add() check
fips_enabled itself. Previously it relied on the error from
crypto_alloc_ahash("md5") being bubbled up. I don't know for sure that
this is actually needed, but this preserves the existing behavior.
Tested with bidirectional TCP-MD5, both IPv4 and IPv6, between a kernel
that includes this commit and a kernel that doesn't include this commit.
(Side note: please don't use TCP-MD5! It's cryptographically weak. But
as long as Linux supports it, it might as well be implemented properly.)
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Link: https://patch.msgid.link/20251014215836.115616-1-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The io_uring functions return negative error values, but error() expects
these to be positive to properly match them to an errno string. Fix this
to make sure the correct error descriptions are displayed upon failure.
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Link: https://patch.msgid.link/20251016182538.3790567-1-cmllamas@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There's a good chance that more chip versions suffer from the same
hw issue. So let's reconfigure rx unconditionally before the chip reset
when resuming. This shouldn't have any side effect on unaffected chip
versions.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/a5c2e2d2-226f-4896-b8f6-45e2d91f0e24@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When splitting the RTL8221B-VM-CG into C22 and C45 variants, the name was
accidentally changed to RTL8221B-VN-CG. This patch brings back the previous
part number.
Fixes: ad5ce743a6 ("net: phy: realtek: Add driver instances for rtl8221b via Clause 45")
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251016192325.2306757-1-olek2@wp.pl
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The blamed commit increased the needed headroom to account for
alignment. This means that the size required to always align a Tx buffer
was added inside the dpaa2_eth_needed_headroom() function. By doing
that, a manual adjustment of the pointer passed to PTR_ALIGN() was no
longer correct since the 'buffer_start' variable was already pointing
to the start of the skb's memory.
The behavior of the dpaa2-eth driver without this patch was to drop
frames on Tx even when the headroom was matching the 128 bytes
necessary. Fix this by removing the manual adjust of 'buffer_start' from
the PTR_MODE call.
Closes: https://lore.kernel.org/netdev/70f0dcd9-1906-4d13-82df-7bbbbe7194c6@app.fastmail.com/T/#u
Fixes: f422abe3f2 ("dpaa2-eth: increase the needed headroom to account for alignment")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Tested-by: Mathew McBride <matt@traverse.com.au>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251016135807.360978-1-ioana.ciornei@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch fixes ce7a381697 ("net: bonding: add broadcast_neighbor option for 802.3ad").
Before this commit, on the broadcast mode, all devices were traversed using the
bond_for_each_slave_rcu. This patch supports traversing devices by using all_slaves.
Therefore, we need to update the slave array when enslave or release slave.
Fixes: ce7a381697 ("net: bonding: add broadcast_neighbor option for 802.3ad")
Cc: Simon Horman <horms@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Andrew Lunn <andrew+netdev@lunn.ch>
Cc: <stable@vger.kernel.org>
Reported-by: Jiri Slaby <jirislaby@kernel.org>
Tested-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/all/a97e6e1e-81bc-4a79-8352-9e4794b0d2ca@kernel.org/
Signed-off-by: Tonghao Zhang <tonghao@bamaicloud.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Acked-by: Jay Vosburgh <jv@jvosburgh.net>
Link: https://patch.msgid.link/20251016125136.16568-1-tonghao@bamaicloud.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Quoting Eric Dumazet:
"I do not understand the fascination with net/core/drop_monitor.c [..]
misses all the features, flexibility, scalability that 'perf',
eBPF tracing, bpftrace, .... have today."
Reword DROP_MONITOR kconfig help text to clearly state that its not
related to perf-based drop monitoring and that its safe to disable
this unless support for the older netlink-based tools is needed.
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20251016115147.18503-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
cloud-ifupdown-helper patch and reattach-vf.sh script are rendered in
htmldocs output as normal paragraphs instead of literal code blocks
due to missing separator from respective code block marker. Add it.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251016093936.29442-2-bagasdotme@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ENETC RX ring uses the page halves flipping mechanism, each page is
split into two halves for the RX ring to use. And ENETC_RXB_TRUESIZE is
defined to 2048 to indicate the size of half a page. However, the page
size is configurable, for ARM64 platform, PAGE_SIZE is default to 4K,
but it could be configured to 16K or 64K.
When PAGE_SIZE is set to 16K or 64K, ENETC_RXB_TRUESIZE is not correct,
and the RX ring will always use the first half of the page. This is not
consistent with the description in the relevant kernel doc and commit
messages.
This issue is invisible in most cases, but if users want to increase
PAGE_SIZE to receive a Jumbo frame with a single buffer for some use
cases, it will not work as expected, because the buffer size of each
RX BD is fixed to 2048 bytes.
Based on the above two points, we expect to correct ENETC_RXB_TRUESIZE
to (PAGE_SIZE >> 1), as described in the comment.
Fixes: d4fd0404c1 ("enetc: Introduce basic PF and VF ENETC ethernet drivers")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Link: https://patch.msgid.link/20251016080131.3127122-1-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After applying the workaround for err050089, the LS1028A platform
experiences RCU stalls on RT kernel. This issue is caused by the
recursive acquisition of the read lock enetc_mdio_lock. Here list some
of the call stacks identified under the enetc_poll path that may lead to
a deadlock:
enetc_poll
-> enetc_lock_mdio
-> enetc_clean_rx_ring OR napi_complete_done
-> napi_gro_receive
-> enetc_start_xmit
-> enetc_lock_mdio
-> enetc_map_tx_buffs
-> enetc_unlock_mdio
-> enetc_unlock_mdio
After enetc_poll acquires the read lock, a higher-priority writer attempts
to acquire the lock, causing preemption. The writer detects that a
read lock is already held and is scheduled out. However, readers under
enetc_poll cannot acquire the read lock again because a writer is already
waiting, leading to a thread hang.
Currently, the deadlock is avoided by adjusting enetc_lock_mdio to prevent
recursive lock acquisition.
Fixes: 6d36ecdbc4 ("net: enetc: take the MDIO lock only once per NAPI poll cycle")
Signed-off-by: Jianpeng Chang <jianpeng.chang.cn@windriver.com>
Acked-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20251015021427.180757-1-jianpeng.chang.cn@windriver.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Xuanqiang Luo says:
====================
net: Avoid ehash lookup races
After replacing R/W locks with RCU in commit 3ab5aee7fe ("net: Convert
TCP & DCCP hash tables to use RCU / hlist_nulls"), a race window emerged
during the switch from reqsk/sk to sk/tw.
Now that both timewait sock (tw) and full sock (sk) reside on the same
ehash chain, it is appropriate to introduce hlist_nulls replace
operations, to eliminate the race conditions caused by this window.
Before this series of patches, I previously sent another version of the
patch, attempting to avoid the issue using a lock mechanism. However, it
seems there are some problems with that approach now, so I've switched to
the "replace" method in the current patches to resolve the issue.
For details, refer to:
https://lore.kernel.org/netdev/20250903024406.2418362-1-xuanqiang.luo@linux.dev/
Before I encountered this type of issue recently, I found there had been
several historical discussions about it. Therefore, I'm adding this
background information for those interested to reference:
1. https://lore.kernel.org/lkml/20230118015941.1313-1-kerneljasonxing@gmail.com/
2. https://lore.kernel.org/netdev/20230606064306.9192-1-duanmuquan@baidu.com/
====================
Link: https://patch.msgid.link/20251015020236.431822-1-xuanqiang.luo@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since ehash lookups are lockless, if another CPU is converting sk to tw
concurrently, fetching the newly inserted tw with tw->tw_refcnt == 0 cause
lookup failure.
The call trace map is drawn as follows:
CPU 0 CPU 1
----- -----
inet_twsk_hashdance_schedule()
spin_lock()
inet_twsk_add_node_rcu(tw, ...)
__inet_lookup_established()
(find tw, failure due to tw_refcnt = 0)
__sk_nulls_del_node_init_rcu(sk)
refcount_set(&tw->tw_refcnt, 3)
spin_unlock()
By replacing sk with tw atomically via hlist_nulls_replace_init_rcu() after
setting tw_refcnt, we ensure that tw is either fully initialized or not
visible to other CPUs, eliminating the race.
It's worth noting that we held lock_sock() before the replacement, so
there's no need to check if sk is hashed. Thanks to Kuniyuki Iwashima!
Fixes: 3ab5aee7fe ("net: Convert TCP & DCCP hash tables to use RCU / hlist_nulls")
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Signed-off-by: Xuanqiang Luo <luoxuanqiang@kylinos.cn>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20251015020236.431822-4-xuanqiang.luo@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since ehash lookups are lockless, if one CPU performs a lookup while
another concurrently deletes and inserts (removing reqsk and inserting sk),
the lookup may fail to find the socket, an RST may be sent.
The call trace map is drawn as follows:
CPU 0 CPU 1
----- -----
inet_ehash_insert()
spin_lock()
sk_nulls_del_node_init_rcu(osk)
__inet_lookup_established()
(lookup failed)
__sk_nulls_add_node_rcu(sk, list)
spin_unlock()
As both deletion and insertion operate on the same ehash chain, this patch
introduces a new sk_nulls_replace_node_init_rcu() helper functions to
implement atomic replacement.
Fixes: 5e0724d027 ("tcp/dccp: fix hashdance race for passive sessions")
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Signed-off-by: Xuanqiang Luo <luoxuanqiang@kylinos.cn>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20251015020236.431822-3-xuanqiang.luo@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add two functions to atomically replace RCU-protected hlist_nulls entries.
Keep using WRITE_ONCE() to assign values to ->next and ->pprev, as
mentioned in the patch below:
commit efd04f8a8b ("rcu: Use WRITE_ONCE() for assignments to ->next for
rculist_nulls")
commit 860c8802ac ("rcu: Use WRITE_ONCE() for assignments to ->pprev for
hlist_nulls")
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Xuanqiang Luo <luoxuanqiang@kylinos.cn>
Link: https://patch.msgid.link/20251015020236.431822-2-xuanqiang.luo@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In {tcp6,udp6,raw6}_sock, struct ipv6_pinfo is always placed at
the beginning of a new cache line because
1. __alignof__(struct tcp_sock) is 64 due to ____cacheline_aligned
of __cacheline_group_begin(tcp_sock_write_tx)
2. __alignof__(struct udp_sock) is 64 due to ____cacheline_aligned
of struct numa_drop_counters
3. in raw6_sock, struct numa_drop_counters is placed before
struct ipv6_pinfo
. struct ipv6_pinfo is 136 bytes, but the last cache line is
only used by ipv6_fl_list:
$ pahole -C ipv6_pinfo vmlinux
struct ipv6_pinfo {
...
/* --- cacheline 2 boundary (128 bytes) --- */
struct ipv6_fl_socklist * ipv6_fl_list; /* 128 8 */
/* size: 136, cachelines: 3, members: 23 */
Let's move ipv6_fl_list from struct ipv6_pinfo to struct inet_sock
to save a full cache line for {tcp6,udp6,raw6}_sock.
Now, struct ipv6_pinfo is 128 bytes, and {tcp6,udp6,raw6}_sock have
64 bytes less, while {tcp,udp,raw}_sock retain the same size.
Before:
# grep -E "^(RAW|UDP[^L\-]|TCP)" /proc/slabinfo | awk '{print $1, "\t", $4}'
RAWv6 1408
UDPv6 1472
TCPv6 2560
RAW 1152
UDP 1280
TCP 2368
After:
# grep -E "^(RAW|UDP[^L\-]|TCP)" /proc/slabinfo | awk '{print $1, "\t", $4}'
RAWv6 1344
UDPv6 1408
TCPv6 2496
RAW 1152
UDP 1280
TCP 2368
Also, ipv6_fl_list and inet_flags (SNDFLOW bit) are placed in the
same cache line.
$ pahole -C inet_sock vmlinux
...
/* --- cacheline 11 boundary (704 bytes) was 56 bytes ago --- */
struct ipv6_pinfo * pinet6; /* 760 8 */
/* --- cacheline 12 boundary (768 bytes) --- */
struct ipv6_fl_socklist * ipv6_fl_list; /* 768 8 */
unsigned long inet_flags; /* 776 8 */
Doc churn is due to the insufficient Type column (only 1 space short).
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20251014224210.2964778-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Explicitly encode the XZR register if the value passed to
write_sysreg_s() is 0. The GIC CDEOI instruction is encoded as a
system register write with XZR as the source register. However, clang
does not honour the "Z" register constraint, leading to incorrect
code generation
- Ensure the interrupts (DAIF.IF) are unmasked when completing
single-step of a suspended breakpoint before calling
exit_to_user_mode(). With pseudo-NMIs, interrupts are (additionally)
masked at the PMR_EL1 register, handled by local_irq_*()
-----BEGIN PGP SIGNATURE-----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=Dn7A
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Explicitly encode the XZR register if the value passed to
write_sysreg_s() is 0.
The GIC CDEOI instruction is encoded as a system register write with
XZR as the source register. However, clang does not honour the "Z"
register constraint, leading to incorrect code generation
- Ensure the interrupts (DAIF.IF) are unmasked when completing
single-step of a suspended breakpoint before calling
exit_to_user_mode().
With pseudo-NMIs, interrupts are (additionally) masked at the PMR_EL1
register, handled by local_irq_*()
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: debug: always unmask interrupts in el0_softstp()
arm64/sysreg: Fix GIC CDEOI instruction encoding
Some RISC-V fixes for v6.18-rc2, including changes to:
- Disable CFI with Rust for any platform other than x86 and ARM64
- Keep task mm_cpumasks up-to-date to avoid triggering M-mode firmware
warnings if the kernel tries to send an IPI to an offline CPU
- Improve kprobe address validation performance and avoid desyncs
(following x86)
- Avoid duplicate device probes by avoiding DT hardware probing when
ACPI is enabled in early boot
- Use the correct set of dependencies for CONFIG_ARCH_HAS_ELF_CORE_EFLAGS,
avoiding an allnoconfig warning
- Fix a few other minor issues
-----BEGIN PGP SIGNATURE-----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=ZOFG
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linux-6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Paul Walmsley:
- Disable CFI with Rust for any platform other than x86 and ARM64
- Keep task mm_cpumasks up-to-date to avoid triggering M-mode firmware
warnings if the kernel tries to send an IPI to an offline CPU
- Improve kprobe address validation performance and avoid desyncs
(following x86)
- Avoid duplicate device probes by avoiding DT hardware probing when
ACPI is enabled in early boot
- Use the correct set of dependencies for
CONFIG_ARCH_HAS_ELF_CORE_EFLAGS, avoiding an allnoconfig warning
- Fix a few other minor issues
* tag 'riscv-for-linux-6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: kprobes: convert one final __ASSEMBLY__ to __ASSEMBLER__
riscv: Respect dependencies of ARCH_HAS_ELF_CORE_EFLAGS
riscv: acpi: avoid errors caused by probing DT devices when ACPI is used
riscv: kprobes: Fix probe address validation
riscv: entry: fix typo in comment 'instruciton' -> 'instruction'
RISC-V: clear hot-unplugged cores from all task mm_cpumasks to avoid rfence errors
riscv: kgdb: Ensure that BUFMAX > NUMREGBYTES
rust: cfi: only 64-bit arm and x86 support CFI_CLANG
The zap shader was previously loaded from "qcom/a530_zap.mdt", which is a
symlink to "qcom/apq8096/a530_zap.mbn". Update the DTS to reference the
actual firmware file in linux-firmware directly.
This avoids relying on the symlink and ensures a more robust firmware load
path.
Signed-off-by: Valentine Burley <valentine.burley@collabora.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251014084808.112097-1-valentine.burley@collabora.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
When booting msm8953-based devices, the following kernel message
appears:
[ 13.090800] qcom-spmi-vadc 200f000.spmi:pmic@2:adc@3100: Please define VDD channel
It turns out the pmi8950 uses same VDD and GND channels as other
Qualcomm's PMICs, so we can simply copy the channel definition from
the other Qualcomm's PMIC dtsi.
Signed-off-by: Antony Kurniawan Soemardi <linux@smankusors.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251004-fix-pmi8950-vadc-v1-1-3143ecab99e9@smankusors.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Every Core Prime uses an Imagis IST3038 touchscreen that is connected to
&blsp_i2c5. Move it to the common device tree.
Signed-off-by: Raymond Hackley <raymondhackley@protonmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251004123907.84270-1-raymondhackley@protonmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
With the recent dt-bindings update, the missing USB4 clocks have been
added.
Extend the existing list to make sure the DT contains the expected
amount of 'clocks' entries.
Reviewed-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251003-topic-hamoa_gcc_usb4-v2-3-61d27a14ee65@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The CSMQDEBUG is useful for the development of MQ feature. Start dumping
the debug register.
Cc: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Wang Xin <x.wang@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20251016-xe3p-v3-10-3dd173a3097a@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Add CURRENT_LRCA to register dump to help debugging.
Cc: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Wang Xin <x.wang@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20251016-xe3p-v3-9-3dd173a3097a@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Xe3p introduces a dedicated SERVICE_COPY_ENABLE fuse register to reflect
the availability of the service copy engines (BCS1-BCS8).
Bspec: 74624
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/20251016-xe3p-v3-8-3dd173a3097a@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Since the hardware load balancing is no longer supported, the
programming in RCU_MODE is no longer necessary.
Bspec: 60382
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://lore.kernel.org/r/20251016-xe3p-v3-7-3dd173a3097a@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Xe3p_LPM's MCR steering has the same ranges and behavior as Xe3_LPM.
However one register range that was reserved on Xe3_LPM has now become a
unicast range (0x384200-0x38427F), so we need to stop consolidating the
adjacent MCR ranges into a single table entry in the table. With this
change to the Xe3_LPM table, we can continue to use the same table for
both IP families.
While we're touching this table, take the opportunity to fix a
whitespace mistake and clarify that one of the other consolidated range
entries includes a reserved range.
Bspec: 76445
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://lore.kernel.org/r/20251016-xe3p-v3-6-3dd173a3097a@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
IP version 35 has removed "NOA Enable Signal" bit from RPM_CONFIG1
register. Skip clearing that bit on unsupported IPs.
Bspec: 62391
Signed-off-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20251016-xe3p-v3-5-3dd173a3097a@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
In some situations we will need to check the version of the specific gt
being passed as argument, not if the device has a certain graphics/media
version.
This is extracted from a patch by Balasubramani Vivekanandan that
may need some rework, but this helper is still useful for other enabling
parts of Xe3p.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20251016-xe3p-v3-4-3dd173a3097a@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
The warning was added for a condition that never triggered even for
platforms prior to Xe2. It's not supported in Xe2 and in Xe3p the
register is removed from the main GT. Just drop the entire function as
it doesn't bring any benefit.
Bspec: 62395
Signed-off-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
[ Drop the entire check for CTC_MODE ]
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20251016-xe3p-v3-3-3dd173a3097a@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Xe3p_LPM/Xe3p_HPM are very similar to Xe3_LPM on the kmd interface, so it can use
the same descriptor structure. Add both 35.00 and 35.03 IP versions.
BSpec: 74201, 74202, 77977, 77979
Cc: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Signed-off-by: Shekhar Chauhan <shekhar.chauhan@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20251016-xe3p-v3-2-3dd173a3097a@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Add graphics IP versions 30.04 & 30.05 and initial workarounds for these
IP versions.
BSpec: 74201
Signed-off-by: Shekhar Chauhan <shekhar.chauhan@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20251016-xe3p-v3-1-3dd173a3097a@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
With AVIC support for 4k vCPUs, the maximum supported physical ID in
x2AVIC mode is 4095. Since this is no longer fixed, introduce a variable
(x2avic_max_physical_id) to capture the maximum supported physical ID on
the current platform and use that in place of the existing macro
(X2AVIC_MAX_PHYSICAL_ID).
With AVIC support for 4k vCPUs, the AVIC Physical ID table is no
longer a single page and can occupy up to 8 contiguous 4k pages. Since
AVIC hardware accesses of the physical ID table are limited by the
physical max index programmed in the VMCB, it is sufficient to allocate
only as many pages as are required to have a physical table entry for
the max guest APIC ID. Since the guest APIC mode is not available at
this point, provision for the maximum possible x2AVIC ID. For this
purpose, add a variant of avic_get_max_physical_id() that works with a
NULL vCPU pointer and returns the max x2AVIC ID. Wrap this in a new
helper for obtaining the allocation order.
To make it easy to identify support for 4k vCPUs in x2AVIC mode, update
the message printed to the kernel log to print the maximum number of
vCPUs supported. Do this on all platforms supporting x2AVIC since it is
useful to know what is supported on a specific platform.
Co-developed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Naveen N Rao (AMD) <naveen@kernel.org>
Link: https://lore.kernel.org/r/7fc5962f6da028f7dd3c79dbbd5c574fa02c99dd.1757009416.git.naveen@kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add CPUID feature bit for x2AVIC extension that enables AMD SVM to
support up to 4096 vCPUs in x2AVIC mode. The primary change is in the
size of the AVIC Physical ID table, which can now go up to 8 contiguous
4k pages. The number of pages allocated is controlled by the maximum
APIC ID for a guest, and that controls the number of pages to allocate
for the AVIC Physical ID table. AVIC hardware is enhanced to look up
Physical ID table entries for vCPUs > 512 for locating the target APIC
backing page and the host APIC ID of the physical core on which the
guest vCPU is running.
Signed-off-by: Naveen N Rao (AMD) <naveen@kernel.org>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/e5c9c471ab99a130bf9b728b77050ab308cf8624.1757009416.git.naveen@kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
With support for 4k vCPUs in x2AVIC, the size of the AVIC Physical ID
table is expanded from a single 4k page to a maximum of 8 contiguous 4k
pages. The actual number of pages allocated depends on the maximum
possible APIC ID in the guest, which is only known by the time the first
vCPU is created. In preparation for supporting a dynamic AVIC Physical
ID table size, move its allocation to vcpu_precreate().
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Naveen N Rao (AMD) <naveen@kernel.org>
Link: https://lore.kernel.org/r/7dc764e0af7f01440bbac3d9215ed174027c2384.1757009416.git.naveen@kernel.org
[sean: drop enable_apicv check from svm_vcpu_precreate()]
Signed-off-by: Sean Christopherson <seanjc@google.com>
In the latest APM describing AVIC support for 4k vCPUs, VMCB
AVIC_PHYSICAL_MAX_INDEX (Offset 0xF8) and EXITINFO2.Index are both
updated from 9-bit wide to 12-bit wide fields unconditionally (i.e.,
regardless of AVIC support for 4k vCPUs). Expand
AVIC_PHYSICAL_MAX_INDEX_MASK accordingly.
While AVIC_PHYSICAL_MAX_INDEX_MASK is updated to a 12-bit field, KVM
will limit the max vCPU/APIC ID based on the maximum supported on a
specific processor and enforce that limit during vCPU creation. I.e.,
KVM doesn't need to rely on the mask to ensure that the max APIC ID being
programmed in the VMCB is in range. The additional bits (11:9) were
previously marked reserved and were never set/read by older processors.
Signed-off-by: Naveen N Rao (AMD) <naveen@kernel.org>
Link: https://lore.kernel.org/r/a24ae953cea716bf9c56c136f7ca4bf5e97b1080.1757009416.git.naveen@kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
The lower 9-bit field in EXITINFO2 represents an index into the AVIC
Physical/Logical APIC ID table for a AVIC_INCOMPLETE_IPI #VMEXIT. Since
the index into the Logical APIC ID table is just 8 bits, this field is
actually bound by the bit-width of the index into the AVIC Physical ID
table which is represented by AVIC_PHYSICAL_MAX_INDEX_MASK. So, use that
macro to mask EXITINFO2.Index instead of hard coding 0x1FF in
avic_incomplete_ipi_interception().
Co-developed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Naveen N Rao (AMD) <naveen@kernel.org>
Link: https://lore.kernel.org/r/95795f449c68bffcb3e1789ee2b0b7393711d37d.1757009416.git.naveen@kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
To help with a future change, add a helper to look up the maximum
physical ID depending on the vCPU AVIC mode. No functional change
intended.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Naveen N Rao (AMD) <naveen@kernel.org>
Link: https://lore.kernel.org/r/0ab9bf5e20a3463a4aa3a5ea9bbbac66beedf1d1.1757009416.git.naveen@kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
