The RZ DMA controller is used across multiple Renesas SoCs, not only
RZ/A1 (R7S72100) and RZ/G2L. Limiting the build to these SoCs prevents
enabling the driver on newer platforms such as RZ/V2H(P) and RZ/V2N.
Replace the ARCH_R7S72100 || ARCH_RZG2L dependency with ARCH_RENESAS so
the driver can be built for all Renesas SoCs.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Convert the Renesas R-Car DMA Controller driver from
SET_NOIRQ_SYSTEM_SLEEP_PM_OPS() and SET_RUNTIME_PM_OPS() to
NOIRQ_SYSTEM_SLEEP_PM_OPS(), RUNTIME_PM_OPS(), and pm_ptr(). This lets
us drop the check for CONFIG_PM, and reduces kernel size in case
CONFIG_PM is disabled, while increasing build coverage.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Since commit 63d00be693 ("PM: runtime: Allow unassigned
->runtime_suspend|resume callbacks"), unassigned
.runtime_{suspend,resume}() callbacks are treated the same as dummy
callbacks that just return zero.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Convert the Renesas Type-AXI NBPF DMA driver from SET_RUNTIME_PM_OPS()
to RUNTIME_PM_OPS(), and pm_ptr(). This lets us drop the check for
CONFIG_PM, and reduces kernel size in case CONFIG_PM is disabled, while
increasing build coverage.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Convert the Renesas USB-DMA Controller driver from
SET_NOIRQ_SYSTEM_SLEEP_PM_OPS() and SET_RUNTIME_PM_OPS() to
NOIRQ_SYSTEM_SLEEP_PM_OPS(), RUNTIME_PM_OPS(), and pm_ptr(). This lets
us drop the check for CONFIG_PM, and reduces kernel size in case
CONFIG_PM is disabled, while increasing build coverage.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
To set all 64 bits in the mask on a 32-bit system, the constant must
have type `unsigned long long`.
Fixes: 6b1e8ba4ba ("RISC-V: KVM: Use bitmap for irqs_pending and irqs_pending_mask")
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20251016001714.3889380-1-samuel.holland@sifive.com
Signed-off-by: Anup Patel <anup@brainfault.org>
Merge series from Cristian Ciocaltea <cristian.ciocaltea@collabora.com>:
This patch series addresses a set of issues in the Nuvoton NAU88L21
audio codec driver related to interrupt handling and jack hotplug
detection reliability.
The changes focus on:
* Eliminating race conditions between jack insertion and ejection events
* Ensuring interrupts are consistently and correctly cleared before
unmasking
* Introducing a DMI-based quirk to bypass the jack debounce circuit on
Valve Steam Deck, improving detection accuracy under stress
* Improving robustness of the IRQ handler by avoiding unnecessary
blocking operations
The series has been tested on affected hardware to verify correct
behavior during repeated and rapid jack hotplug cycles.
Merge series from Le Qi <le.qi@oss.qualcomm.com>:
This patch series adds support for the QCS615 sound card:
- Updates device tree bindings for SM8250 to include QCS615.
- Adds QCS615 support in the SC8280XP ASoC driver.
Separating the panic allocation from framebuffer allocation in commit
729c5f7ffa ("drm/{i915,xe}/panic: move framebuffer allocation where it
belongs") failed to deallocate the panic structure anywhere.
The fix is two-fold. First, free the panic structure in
intel_user_framebuffer_destroy() in the general case. Second, move the
panic allocation later to intel_framebuffer_init() to not leak the panic
structure in error paths (if any, now or later) between
intel_framebuffer_alloc() and intel_framebuffer_init().
v2: Rebase
Fixes: 729c5f7ffa ("drm/{i915,xe}/panic: move framebuffer allocation where it belongs")
Cc: Jocelyn Falempe <jfalempe@redhat.com>
Cc: Maarten Lankhorst <dev@lankhorst.se>
Reported-by: Michał Grzelak <michal.grzelak@intel.com>
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Michał Grzelak <michal.grzelak@intel.com> # v1
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20251015095135.2183415-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Add support for the GPIO controller found on some QIXIS FPGAs in
Layerscape boards such as LX2160ARDB and LS1046AQDS. This driver is
using gpio-regmap.
A GPIO controller has a maximum of 8 lines (all found in the same
register). Even within the same controller, the GPIO lines' direction is
fixed, which mean that both input and output lines are found in the same
register. This is why the driver also passed to gpio-regmap the newly
added .fixed_direction_output bitmap to represent the true direction of
the lines.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Michael Walle <mwalle@kernel.org> # for the gpio-regmap part
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
There are GPIO controllers such as the one present in the LX2160ARDB
QIXIS FPGA which have fixed-direction input and output GPIO lines mixed
together in a single register. This cannot be modeled using the
gpio-regmap as-is since there is no way to present the true direction of
a GPIO line.
In order to make this use case possible, add a new configuration
parameter - fixed_direction_output - into the gpio_regmap_config
structure. This will enable user drivers to provide a bitmap that
represents the fixed direction of the GPIO lines.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Add a device tree binding for the QIXIS FPGA based GPIO controller.
Depending on the board, the QIXIS FPGA exposes registers which act as a
GPIO controller, each with 8 GPIO lines of fixed direction.
Since each QIXIS FPGA layout has its particularities, add a separate
compatible string for each board/GPIO register combination supported.
Since these GPIO controllers are trivial, make use of the newly added
trivial-gpio.yaml file instead of creating an entirely new one.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Mark the RTL8211F PHY as a wakeup source for the Jetson Xavier NX.
This allows the reworked RTL8211F driver to know that the PHY is
wired to wakeup capable hardware, and thus to expose WoL capabilities.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
This series introduces new objtool features and a klp-build script to
generate livepatch modules using a source .patch as input.
This builds on concepts from the longstanding out-of-tree kpatch [1]
project which began in 2012 and has been used for many years to generate
livepatch modules for production kernels. However, this is a complete
rewrite which incorporates hard-earned lessons from 12+ years of
maintaining kpatch.
Key improvements compared to kpatch-build:
- Integrated with objtool: Leverages objtool's existing control-flow
graph analysis to help detect changed functions.
- Works on vmlinux.o: Supports late-linked objects, making it
compatible with LTO, IBT, and similar.
- Simplified code base: ~3k fewer lines of code.
- Upstream: No more out-of-tree #ifdef hacks, far less cruft.
- Cleaner internals: Vastly simplified logic for symbol/section/reloc
inclusion and special section extraction.
- Robust __LINE__ macro handling: Avoids false positive binary diffs
caused by the __LINE__ macro by introducing a fix-patch-lines script
which injects #line directives into the source .patch to preserve
the original line numbers at compile time.
The primary user interface is the klp-build script which does the
following:
- Builds an original kernel with -function-sections and
-fdata-sections, plus objtool function checksumming.
- Applies the .patch file and rebuilds the kernel using the same
options.
- Runs 'objtool klp diff' to detect changed functions and generate
intermediate binary diff objects.
- Builds a kernel module which links the diff objects with some
livepatch module init code (scripts/livepatch/init.c).
- Finalizes the livepatch module (aka work around linker wreckage)
using 'objtool klp post-link'.
I've tested with a variety of patches on defconfig and Fedora-config
kernels with both GCC and Clang.
Dimitri Daskalakis says:
====================
Add aarch64 support for FBNIC
We need to support aarch64 with 64K PAGE_SIZE, and I uncovered an issue
during testing.
====================
Link: https://patch.msgid.link/20251013211449.1377054-1-dimitri.daskalakis1@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This enables aarch64 testing, but there's no reason we cannot support other
architectures.
Signed-off-by: Dimitri Daskalakis <dimitri.daskalakis1@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251013211449.1377054-3-dimitri.daskalakis1@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The HW always works on a 4K page size. When the OS supports larger
pages, we fragment them across multiple BDQ descriptors.
We were not properly incrementing the descriptor, which resulted in us
specifying the last chunks id/addr and then 15 zero descriptors. This
would cause packet loss and driver crashes. This is not a fix since the
Kconfig prevents use outside of x86.
Signed-off-by: Dimitri Daskalakis <dimitri.daskalakis1@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251013211449.1377054-2-dimitri.daskalakis1@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Drop some unnecessary brackets in platform_irqchip_probe() mistakenly
left by commit 9322d1915f ("irqchip: Plug a OF node reference leak in
platform_irqchip_probe()").
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Platform drivers can be probed after their init sections have been
discarded so the probe callback must not live in init.
Fixes: f20cc9b00c ("irqchip/qcom: Add IRQ combiner driver")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Platform drivers can be probed after their init sections have been
discarded so the irqchip init callback must not live in init.
Fixes: e4e5350361 ("irqchip: Add StarFive external interrupt controller")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Changhuang Liang <changhuang.liang@starfivetech.com>
Platform drivers can be probed after their init sections have been
discarded so the irqchip init callbacks must not live in init.
Fixes: d011c022ef ("irqchip/renesas-rzg2l: Add support for RZ/Five SoC")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Platform drivers can be probed after their init sections have been
discarded so the irqchip init callbacks must not live in init.
Fixes: 70afdab904 ("irqchip: Add IMX MU MSI controller driver")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Platform drivers can be probed after their init sections have been
discarded so the irqchip init callbacks must not live in init.
Fixes: 51d9db5c8f ("irqchip/irq-brcmstb-l2: Switch to IRQCHIP_PLATFORM_DRIVER")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Platform drivers can be probed after their init sections have been
discarded so the irqchip init callbacks must not live in init.
Fixes: 3ac268d5ed ("irqchip/irq-bcm7120-l2: Switch to IRQCHIP_PLATFORM_DRIVER")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Platform drivers can be probed after their init sections have been
discarded so the irqchip init callback must not live in init.
Fixes: c057c799e3 ("irqchip/irq-bcm7038-l1: Switch to IRQCHIP_PLATFORM_DRIVER")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Platform drivers can be probed after their init sections have been
discarded so the irqchip init callback must not live in init.
Fixes: 32c6c05466 ("irqchip: Add Broadcom BCM2712 MSI-X interrupt controller")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
The init callback must not decrement the reference count of the provided
irqchip OF node.
This should not cause any trouble currently, but if the driver ever
starts probe deferring it could lead to warnings about reference
underflow and saturation.
Fixes: 32c6c05466 ("irqchip: Add Broadcom BCM2712 MSI-X interrupt controller")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Add the set of power domain IDs available on the Tegra264 SoC so that
they can be used in device tree files.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Vendor quirk QUIRK_FLAG_CTL_MSG_DELAY_1M was inadvertently missing when
adding quirk for Logitech H390. Add it back.
Fixes: 2b929b6eec ("ALSA: usb-audio: add mixer_playback_min_mute quirk for Logitech H390")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ID 045e:070f Microsoft Corp. LifeChat LX-3000 Headset
has muted minimum Speaker Playback Volume, and 4 amixer steps were
observed to produce 1 actual volume step.
Apply min_mute quirk and correct res=48 -> 4*48.
Tested with the device.
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
With pick_task() having an rf argument, it is possible to do the
lock-break there, get rid of the weird balance/pick_task hack.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Tejun Heo <tj@kernel.org>
Some pick functions like the internal pick_next_task_fair() already take
rf but some others dont. We need this for scx's server pick function.
Prepare for this by having pick functions accept it.
[peterz: - added RETRY_TASK handling
- removed pick_next_task_fair indirection]
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Tejun Heo <tj@kernel.org>
Have enqueue/dequeue set a per-class bit in rq->queue_mask. This then
enables easy tracking of which runqueues are modified over a
lock-break.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Tejun Heo <tj@kernel.org>
Shrikanth noted that sched_change pattern relies on using shared
flags.
Suggested-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Teach the sched_change pattern how to do update_rq_clock(); this
allows for some simplifications / cleanups.
Suggested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Juri Lelli <juri.lelli@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Vincent Guittot <vincent.guittot@linaro.org>
In preparation to adding more rules to __task_rq_lock(), such that
__task_rq_unlock() will no longer be equivalent to rq_unlock(),
make sure every __task_rq_lock() is matched by a __task_rq_unlock()
and vice-versa.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Juri Lelli <juri.lelli@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Vincent Guittot <vincent.guittot@linaro.org>
'Document' the locking context the various sched_class methods are
called under.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Juri Lelli <juri.lelli@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Vincent Guittot <vincent.guittot@linaro.org>
Now that do_set_cpus_allowed() holds all the regular locks, convert it
to use the sched_change pattern helper.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Juri Lelli <juri.lelli@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Vincent Guittot <vincent.guittot@linaro.org>
All callers of do_set_cpus_allowed() only take p->pi_lock, which is
not sufficient to actually change the cpumask. Again, this is mostly
ok in these cases, but it results in unnecessarily complicated
reasoning.
Furthermore, there is no reason what so ever to not just take all the
required locks, so do just that.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Juri Lelli <juri.lelli@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Vincent Guittot <vincent.guittot@linaro.org>
For some reason migrate_disable_switch() was more complicated than it
needs to be, resulting in mind bending locking of dubious quality.
Recognise that migrate_disable_switch() must be called before a
context switch, but any place before that switch is equally good.
Since the current place results in troubled locking, simply move the
thing before taking rq->lock.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Juri Lelli <juri.lelli@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Vincent Guittot <vincent.guittot@linaro.org>
Move sched_class::prio_changed() into the change pattern.
And while there, extend it with sched_class::get_prio() in order to
fix the deadline sitation.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Juri Lelli <juri.lelli@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Vincent Guittot <vincent.guittot@linaro.org>
Use the new sched_class::switching_from() method to dequeue delayed
tasks before switching to another class.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Juri Lelli <juri.lelli@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Add {DE,EN}QUEUE_CLASS and fold the sched_class::switch* methods into
the change pattern. This completes and makes the pattern more
symmetric.
This changes the order of callbacks slightly:
OLD NEW
|
| switching_from()
dequeue_task(); | dequeue_task()
put_prev_task(); | put_prev_task()
| switched_from()
|
... change task ... | ... change task ...
|
switching_to(); | switching_to()
enqueue_task(); | enqueue_task()
set_next_task(); | set_next_task()
prev_class->switched_from() |
switched_to() | switched_to()
|
Notably, it moves the switched_from() callback right after the
dequeue/put. Existing implementations don't appear to be affected by
this change in location -- specifically the task isn't enqueued on the
class in question in either location.
Make (CLASS)^(SAVE|MOVE), because there is nothing to save-restore
when changing scheduling classes.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Juri Lelli <juri.lelli@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Vincent Guittot <vincent.guittot@linaro.org>
Prepare for the sched_class::switch*() methods getting folded into the
change pattern. As a result of that, the location of switched_from
will change slightly. SCHED_DEADLINE is affected by this change in
location:
OLD NEW
|
| switching_from()
dequeue_task(); | dequeue_task()
put_prev_task(); | put_prev_task()
| switched_from()
|
... change task ... | ... change task ...
|
switching_to(); | switching_to()
enqueue_task(); | enqueue_task()
set_next_task(); | set_next_task()
prev_class->switched_from() |
switched_to() | switched_to()
|
Notably, where switched_from() was called *after* the change to the
task, it will get called before it. Specifically, switched_from_dl()
uses dl_task(p) which uses p->prio; which is changed when switching
class (it might be the reason to switch class in case of PI).
When switched_from_dl() gets called, the task will have left the
deadline class and dl_task() must be false, while when doing
dequeue_dl_entity() the task must be a dl_task(), otherwise we'd have
called a different dequeue method.
Reported-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Ensure the matched flags are in the low word while the unmatched flags
go into the second word.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Juri Lelli <juri.lelli@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Vincent Guittot <vincent.guittot@linaro.org>
As proposed a long while ago -- and half done by scx -- wrap the
scheduler's 'change' pattern in a guard helper.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Juri Lelli <juri.lelli@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Vincent Guittot <vincent.guittot@linaro.org>
Load imbalance is observed when the workload frequently forks new threads.
Due to CPU affinity, the workload can run on CPU 0-7 in the first
group, and only on CPU 8-11 in the second group. CPU 12-15 are always idle.
{ 0 1 2 3 4 5 6 7 } {8 9 10 11 12 13 14 15}
* * * * * * * * * * * *
When looking for dst group for newly forked threads, in many times
update_sg_wakeup_stats() reports the second group has more idle CPUs
than the first group. The scheduler thinks the second group is less
busy. Then it selects least busy CPUs among CPU 8-11. Therefore CPU 8-11
can be crowded with newly forked threads, at the same time CPU 0-7
can be idle.
A task may not use all the CPUs in a schedule group due to CPU affinity.
Only update schedule group statistics for allowed CPUs.
Signed-off-by: Adam Li <adamli@os.amperecomputing.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
