For ternary operators in the form of a ? true : false, if a itself returns
a boolean result, the ternary operator can be omitted. Remove redundant
ternary operators to clean up the code.
Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
For ternary operators in the form of a ? true : false, if a itself returns
a boolean result, the ternary operator can be omitted. Remove redundant
ternary operators to clean up the code.
Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com>
Acked-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Shreeya no longer works at Collabora, set Dmitry as maintainer of
the Synopsys HDMI RX binding.
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Shreeya no longer works at Collabora, set Dmitry as maintainer of
the Synopsys HDMI RX driver.
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The dev_err_probe() doesn't do anything when error is '-ENOMEM'.
Therefore, remove the useless call to dev_err_probe(), and just
return the value instead.
Signed-off-by: Xichao Zhao <zhao.xichao@vivo.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Remove array_size() calls and replace vmalloc(array_size()) with
vmalloc_array() and vzalloc(array_size()) with vcalloc() to simplify
the code.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Remove array_size() calls and replace vmalloc() with vmalloc_array() to
simplify the code.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Remove array_size() calls and replace vmalloc() with vmalloc_array() to
simplify the code.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Revert commit 68594cec29 ("media: xc2028: avoid use-after-free
in load_firmware_cb()") since it doesn't make sense to check
dangling 'struct dvb_frontend *' passed to 'load_firmware_cb()'.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Fix the following checkpatch warning:
av7110_ca.c:29: WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
Signed-off-by: Osama Albahrani <osalbahr@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The code in dvb_demux.c has multiple instances where a variable is
assigned a value inside the conditional part of an 'if' statement.
This practice is prohibited by the Linux kernel coding style to avoid
potential bugs arising from accidental assignments (e.g., '=' instead
of '==').
This patch refactors these instances by moving the assignment out of
the 'if' statement and onto the preceding line. This makes the code
clearer, safer, and compliant with checkpatch.pl.
Additionally, a minor whitespace issue in a function signature is also
corrected. This is a purely stylistic change with no functional impact.
Signed-off-by: Darshan Rathod <darshanrathod475@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The file dvb_ringbuffer.c has several minor coding style violations.
This patch resolves these issues to improve code readability and align
the code with the Linux kernel coding style.
The cleanups include:
- Adding spaces around assignment and comparison operators.
- Adding spaces after commas in function arguments.
- Placing statements on a new line for single-line 'if' blocks.
- Correcting minor indentation.
This is a purely stylistic change with no functional impact.
Signed-off-by: Darshan Rathod <darshanrathod475@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
[hverkuil: split rbuf->pread = rbuf->pwrite = 0 in two lines]
rlen value is a user-controlled value, but dtv5100_i2c_msg() does not
check the size of the rlen value. Therefore, if it is set to a value
larger than sizeof(st->data), an out-of-bounds vuln occurs for st->data.
Therefore, we need to add proper range checking to prevent this vuln.
Fixes: 60688d5e6e ("V4L/DVB (8735): dtv5100: replace dummy frontend by zl10353")
Cc: stable@vger.kernel.org
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
MEM_PREPARE_ONLINE/MEM_FINISH_OFFLINE memory notifiers were introduced
to prepare the transition of memory to and from a physically accessible
state. This enhancement was crucial for implementing the "memmap on memory"
feature for s390.
With introduction of dynamic (de)configuration of hotpluggable memory,
memory can be brought to accessible state before add_memory(). Memory
can be brought to inaccessible state before remove_memory(). Hence,
there is no need of MEM_PREPARE_ONLINE/MEM_FINISH_OFFLINE memory
notifiers anymore.
This basically reverts commit
c5f1e2d189 ("mm/memory_hotplug: introduce MEM_PREPARE_ONLINE/MEM_FINISH_OFFLINE notifiers")
Additionally, apply minor adjustments to the function parameters of
move_pfn_range_to_zone() and mhp_supports_memmap_on_memory() to ensure
compatibility with the latest branch.
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
mhp_flag MHP_OFFLINE_INACCESSIBLE was used to mark memory as not
accessible until memory hotplug online phase begins.
Earlier, standby memory blocks were added upfront during boottime and
MHP_OFFLINE_INACCESSIBLE flag avoided page_init_poison() on memmap
during mhp addition phase.
However with dynamic runtime configuration of memory, standby memory can
be brought to accessible state before performing add_memory(). Hence,
remove MHP_OFFLINE_INACCESSIBLE.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Provide a new interface for dynamic configuration and deconfiguration of
hotplug memory, allowing with/without memmap_on_memory support. It is a
follow up on the discussion with David when introducing memmap_on_memory
support for s390 and support dynamic (de)configuration of memory:
https://lore.kernel.org/all/ee492da8-74b4-4a97-8b24-73e07257f01d@redhat.com/https://lore.kernel.org/all/20241202082732.3959803-1-sumanthk@linux.ibm.com/
The original motivation for introducing memmap_on_memory on s390 was to
avoid using online memory to store struct pages metadata, particularly
for standby memory blocks. This became critical in cases where there was
an imbalance between standby and online memory, potentially leading to
boot failures due to insufficient memory for metadata allocation.
To address this, memmap_on_memory was utilized on s390. However, in its
current form, it adds struct pages metadata at the start of each memory
block at the time of addition and this configuration is static. It
cannot be changed at runtime. (When the user needs continuous physical
memory).
Inorder to provide more flexibility to the user and overcome the above
limitation, add option to dynamically configure and deconfigure
hotpluggable memory block with/without memmap_on_memory.
With the new interface, s390 will not add all possible hotplug memory in
advance, like before, to make it visible in sysfs for online/offline
actions. Instead, before memory block can be set online, it has to be
configured via a new interface in /sys/firmware/memory/memoryX/config,
which makes s390 similar to others. i.e. Adding of hotpluggable memory is
controlled by the user instead of adding it at boottime.
The s390 kernel sysfs interface to configure and deconfigure memory is
as follows (considering the upcoming lsmem changes):
* Initial memory layout:
lsmem -o RANGE,SIZE,STATE,BLOCK,CONFIGURED,MEMMAP_ON_MEMORY
RANGE SIZE STATE BLOCK CONFIGURED MEMMAP_ON_MEMORY
0x00000000-0x7fffffff 2G online 0-15 yes no
0x80000000-0xffffffff 2G offline 16-31 no yes
* Configure memory
sys="/sys"
echo 1 > $sys/firmware/memory/memory16/config
lsmem -o RANGE,SIZE,STATE,BLOCK,CONFIGURED,MEMMAP_ON_MEMORY
RANGE SIZE STATE BLOCK CONFIGURED MEMMAP_ON_MEMORY
0x00000000-0x7fffffff 2G online 0-15 yes no
0x80000000-0x87ffffff 128M offline 16 yes yes
0x88000000-0xffffffff 1.9G offline 17-31 no yes
* Deconfigure memory
echo 0 > $sys/firmware/memory/memory16/config
lsmem -o RANGE,SIZE,STATE,BLOCK,CONFIGURED,MEMMAP_ON_MEMORY
RANGE SIZE STATE BLOCK CONFIGURED MEMMAP_ON_MEMORY
0x00000000-0x7fffffff 2G online 0-15 yes no
0x80000000-0xffffffff 2G offline 16-31 no yes
3. Enable memmap_on_memory and online it.
echo 0 > $sys/devices/system/memory/memory5/online
echo 0 > $sys/firmware/memory/memory5/config
lsmem -o RANGE,SIZE,STATE,BLOCK,CONFIGURED,MEMMAP_ON_MEMORY
RANGE SIZE STATE BLOCK CONFIGURED MEMMAP_ON_MEMORY
0x00000000-0x27ffffff 640M online 0-4 yes no
0x28000000-0x2fffffff 128M offline 5 no no
0x30000000-0x7fffffff 1.3G online 6-15 yes no
0x80000000-0xffffffff 2G offline 16-31 no yes
echo 1 > $sys/firmware/memory/memory5/memmap_on_memory
echo 1 > $sys/firmware/memory/memory5/config
echo 1 > $sys/devices/system/memory/memory5/online
lsmem -o RANGE,SIZE,STATE,BLOCK,CONFIGURED,MEMMAP_ON_MEMORY
RANGE SIZE STATE BLOCK CONFIGURED MEMMAP_ON_MEMORY
0x00000000-0x27ffffff 640M online 0-4 yes no
0x28000000-0x2fffffff 128M online 5 yes yes
0x30000000-0x7fffffff 1.3G online 6-15 yes no
0x80000000-0xffffffff 2G offline 16-31 no yes
4. Disable memmap_on_memory and online it.
echo 0 > $sys/devices/system/memory/memory5/online
echo 0 > $sys/firmware/memory/memory5/config
lsmem -o RANGE,SIZE,STATE,BLOCK,CONFIGURED,MEMMAP_ON_MEMORY
RANGE SIZE STATE BLOCK CONFIGURED MEMMAP_ON_MEMORY
0x00000000-0x27ffffff 640M online 0-4 yes no
0x28000000-0x2fffffff 128M offline 5 no yes
0x30000000-0x7fffffff 1.3G online 6-15 yes no
0x80000000-0xffffffff 2G offline 16-31 no yes
echo 0 > $sys/firmware/memory/memory5/memmap_on_memory
echo 1 > $sys/firmware/memory/memory5/config
echo 1 > $sys/devices/system/memory/memory5/online
lsmem -o RANGE,SIZE,STATE,BLOCK,CONFIGURED,MEMMAP_ON_MEMORY
RANGE SIZE STATE BLOCK CONFIGURED MEMMAP_ON_MEMORY
0x00000000-0x7fffffff 2G online 0-15 yes no
0x80000000-0xffffffff 2G offline 16-31 no yes
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
On s390, memory blocks are not currently removed via
arch_remove_memory(). With upcoming dynamic memory (de)configuration
support, runtime removal of memory blocks is possible. This internally
involves tearing down identity mapping, virtual memory mappings and
freeing the physical memory backing the struct pages metadata.
During early boot, physical memory used to back the struct pages
metadata in vmemmap is allocated through:
setup_arch()
-> sparse_init()
-> sparse_init_nid()
-> __populate_section_memmap()
-> vmemmap_alloc_block_buf()
-> sparse_buffer_alloc()
-> memblock_alloc()
Here, sparse_init_nid() sets up virtual-to-physical mapping for struct
pages backed by memblock_alloc(). This differs from runtime addition of
hotplug memory which uses the buddy allocator later.
To correctly free identity mappings, vmemmap mappings during hot-remove,
boot-time and runtime allocations must be distinguished using the
PageReserved bit:
* Boot-time memory, such as identity-mapped page tables allocated via
boot_crst_alloc() and reserved via reserve_pgtables() is marked
PageReserved in memmap_init_reserved_pages().
* Physical memory backing vmemmap (struct pages from memblock_alloc())
is also marked PageReserved similarly.
During teardown, PageReserved bit is checked to distinguish between
boot-time allocation or buddy allocation.
This is similar to commit 645d5ce2f7 ("powerpc/mm/radix: Fix PTE/PMD
fragment count for early page table mappings")
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The "grf" clock is optional for Rockchip eDP controller(RK3399 needs
while RK3288 and RK3588 do not).
It can make the code more concise to use devm_clk_get_optional()
instead of devm_clk_get() with extra checks.
In addtion, DRM_DEV_ERROR() is replaced by dev_err_probe().
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250928103734.4007257-1-damon.ding@rock-chips.com
Add csus_mux for further use as the csus clock parent, similar to how the
cdev1 and cdev2 muxes are utilized. Additionally, constify the cdev parent
name lists to resolve checkpatch warnings.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add "INTC10D2" ACPI device-id for MTL-CVF devices, like the Dell Latitude
7450.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2368506
Signed-off-by: Hans de Goede <hansg@kernel.org>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Israel Cepeda <israel.a.cepeda.lopez@intel.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
pm_runtime_put_autosuspend(), pm_runtime_put_sync_autosuspend(),
pm_runtime_autosuspend() and pm_request_autosuspend() now include a call
to pm_runtime_mark_last_busy(). Remove the now-reduntant explicit call to
pm_runtime_mark_last_busy().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
The syscon compatible for the hifsys node for Mediatek MT2701/MT7623 SoC
was wrongly added following the pattern of other clock node but it's
actually not needed as the register are not used by other device on the
SoC.
On top of this it's against the schema for hifsys YAML and causes a
dtbs_check warning.
Drop the "syscon" compatible to mute the warning and reflect the
compatible property described in the mediatek,mt2701-hifsys.yaml schema.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
For x86_64 the kernel consistently uses 2 instructions for all NOPs:
90 - NOP
0f 1f /0 - NOPL
Notably:
- REP NOP is PAUSE, not a NOP instruction.
- 0f {0c...0f} is reserved space,
except for 0f 0d /1, which is PREFETCHW, not a NOP.
- 0f {19,1c...1f} is reserved space,
except for 0f 1f /0, which is NOPL.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Per commit 85a2d4a890 ("x86,ibt: Use UDB instead of 0xEA"), make
sure objtool also recognises UDB as a #UD instruction.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Was properly fixed in the decoder with commit 4b626015e1 ("x86/insn:
Stop decoding i64 instructions in x86-64 mode at opcode")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
The check for some lost idle pelt time should be always done when
pick_next_task_fair() fails to pick a task and not only when we call it
from the fair fast-path.
The case happens when the last running task on rq is a RT or DL task. When
the latter goes to sleep and the /Sum of util_sum of the rq is at the max
value, we don't account the lost of idle time whereas we should.
Fixes: 67692435c4 ("sched: Rework pick_next_task() slow-path")
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
IBM CI tool reported kernel warning[1] when running a CPU removal
operation through drmgr[2]. i.e "drmgr -c cpu -r -q 1"
WARNING: CPU: 0 PID: 0 at kernel/sched/cpudeadline.c:219 cpudl_set+0x58/0x170
NIP [c0000000002b6ed8] cpudl_set+0x58/0x170
LR [c0000000002b7cb8] dl_server_timer+0x168/0x2a0
Call Trace:
[c000000002c2f8c0] init_stack+0x78c0/0x8000 (unreliable)
[c0000000002b7cb8] dl_server_timer+0x168/0x2a0
[c00000000034df84] __hrtimer_run_queues+0x1a4/0x390
[c00000000034f624] hrtimer_interrupt+0x124/0x300
[c00000000002a230] timer_interrupt+0x140/0x320
Git bisects to: commit 4ae8d9aa9f ("sched/deadline: Fix dl_server getting stuck")
This happens since:
- dl_server hrtimer gets enqueued close to cpu offline, when
kthread_park enqueues a fair task.
- CPU goes offline and drmgr removes it from cpu_present_mask.
- hrtimer fires and warning is hit.
Fix it by stopping the dl_server before CPU is marked dead.
[1]: https://lore.kernel.org/all/8218e149-7718-4432-9312-f97297c352b9@linux.ibm.com/
[2]: https://github.com/ibm-power-utilities/powerpc-utils/tree/next/src/drmgr
[sshegde: wrote the changelog and tested it]
Fixes: 4ae8d9aa9f ("sched/deadline: Fix dl_server getting stuck")
Closes: https://lore.kernel.org/all/8218e149-7718-4432-9312-f97297c352b9@linux.ibm.com
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reported-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Now that we have struct netmem_desc, it'd better access the pp fields
via struct netmem_desc rather than struct net_iov.
Introduce netmem_to_nmdesc() for safely converting netmem_ref to
netmem_desc regardless of the type underneath e.i. netmem_desc, net_iov.
While at it, remove __netmem_clear_lsb() and make netmem_to_nmdesc()
used instead.
Suggested-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Byungchul Park <byungchul@sk.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20251013044133.69472-1-byungchul@sk.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Function topology must be used if the ACPI match table is created based
on the reported ACPI table because the monolithic topology is not picked
for the audio configuration.
Escalate the log and ask the user to download the latest topologies.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Simon Trimmer <simont@opensource.cirrus.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20251014071335.3844631-10-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If there is no SoundWire machine matches the existing acpi match table,
get the required machine data from the acpi table and construct the
link adrs and endpoints. Pass the data to the default Intel SoundWire
machine driver. And we don't need to add new item to the acpi match
table in common cases.
We will construct a dummy topology name. The dummy topology is just
used to extract the platform name for function topology and should not
be used.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Simon Trimmer <simont@opensource.cirrus.com>
Link: https://patch.msgid.link/20251014071335.3844631-9-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Monolithic topology is not needed if function topology is used. Instead
of creating a dummy topology in the file system, we can skip the
existence check in the kernel.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Simon Trimmer <simont@opensource.cirrus.com>
Link: https://patch.msgid.link/20251014071335.3844631-8-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The platform name will be used construct the topology name.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Simon Trimmer <simont@opensource.cirrus.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20251014071335.3844631-7-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
asoc_sdw_get_dai_type() is quite useful to convert SDCA function types
to SDW DAI types. It can be used by other drivers.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Simon Trimmer <simont@opensource.cirrus.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20251014071335.3844631-6-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The sof_sdw_get_tplg_files function is a callback of snd_soc_acpi_mach.
Export it to allow other modules to use it.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Simon Trimmer <simont@opensource.cirrus.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20251014071335.3844631-5-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently, the codec name_prefix of Intel SoundWire machine driver is
from the ACPI match table. We can have it in the asoc_sdw_codec_info
struct as a default name_prefix of a codec if there is no corresponding
audio config found in the ACPI match table.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Simon Trimmer <simont@opensource.cirrus.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20251014071335.3844631-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently, we use predefined snd_soc_acpi_link_adr tables to match the
link adr from ACPI table to select the machine driver and the topology.
However, with the mechanism, we need to create the snd_soc_acpi_link_adr
table for each audio config. The sof_sdw machine driver is used by
almost all Intel platforms with SOF and we can load required topology
file dynamically today. In other words, we can use sof_sdw machine
driver as the default machine driver for Intel SOF SoundWire codecs and
no need to create snd_soc_acpi_link_adr table for every new audio
configs.
To achieve it, we need to drop the const for some members and edit the
link adr and acpi adr data to match the data from the ACPI table.
Suggested-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Simon Trimmer <simont@opensource.cirrus.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20251014071335.3844631-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It may confuse people if "Topology file:" is printed but the topology
file is not really used. We keep the print if the topology file is
missing thus user can know what topology is missed in the file system.
And increase the log level to info for the actual topology that is used.
So that user can get which topology is used.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Simon Trimmer <simont@opensource.cirrus.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20251014071335.3844631-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If the location madvise() is set to
DRM_XE_PREFERRED_LOC_DEFAULT_SYSTEM, the drm_pagemap in the
SVM gpu fault handler will be set to NULL. However there is nothing
that explicitly migrates the data to system if it is already present
in device memory.
In that case, set the device memory owner to NULL to ensure
data gets properly migrated to system on page-fault.
v2:
- Remove redundant dpagemap assignment (Himal Prasad Ghimiray)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com> #v1
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://lore.kernel.org/r/20251010104149.72783-2-thomas.hellstrom@linux.intel.com
Fixes: 10aa5c8060 ("drm/gpusvm, drm/xe: Fix userptr to not allow device private pages")
There is a spelling mistake in HID description. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
drivers/net/wan/hdlc_ppp.c: In function ‘ppp_cp_event’:
drivers/net/wan/hdlc_ppp.c:353:17: warning: ‘%s’ directive argument is null [-Wformat-overflow=]
353 | netdev_info(dev, "%s down\n", proto_name(pid));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/wan/hdlc_ppp.c:342:17: warning: ‘%s’ directive argument is null [-Wformat-overflow=]
342 | netdev_info(dev, "%s up\n", proto_name(pid));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Update proto_name() to return "LCP" by default instead of NULL.
This change silences the compiler without changing existing behavior
and removes the need for the local 'pname' variable in ppp_cp_event.
Suggested-by: Krzysztof Hałasa <khalasa@piap.pl>
Signed-off-by: Kriish Sharma <kriish.sharma2006@gmail.com>
Acked-by: Krzysztof Hałasa <khalasa@piap.pl>
Link: https://patch.msgid.link/20251013014319.1608706-1-kriish.sharma2006@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The function `guc_ct_send_locked()` is really quite simple, but still
looks complex due to exposed internals. It is sending a message,
and in case of lack of space, waiting for a proper moment to send
a retry.
Clear separation of send function and wait function will help with
readability. This is a cosmetic change only, no functional difference
is expected.
This patch introduces `guc_ct_send_wait_for_retry()`, and uses it to
greatly simplify `guc_ct_send_locked()`.
Signed-off-by: Tomasz Lis <tomasz.lis@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://lore.kernel.org/r/20251009170844.178199-1-tomasz.lis@intel.com
Completion napi can free out-of-order tx descriptors if hw QoS is
enabled and packets with different priority are queued to same DMA ring.
Take into account possible out-of-order reports checking if the tx queue
is full using circular buffer head/tail pointer instead of the number of
queued packets.
Fixes: 23020f0493 ("net: airoha: Introduce ethernet support for EN7581 SoC")
Suggested-by: Simon Horman <horms@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251012-airoha-tx-busy-queue-v2-1-a600b08bab2d@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Neal reported that using neper tcp_stream with TCP_TX_DELAY
set to 50ms would often lead to flows stuck in a small cwnd mode,
regardless of the congestion control.
While tcp_stream sets TCP_TX_DELAY too late after the connect(),
it highlighted two kernel bugs.
The following heuristic in tcp_tso_should_defer() seems wrong
for large RTT:
delta = tp->tcp_clock_cache - head->tstamp;
/* If next ACK is likely to come too late (half srtt), do not defer */
if ((s64)(delta - (u64)NSEC_PER_USEC * (tp->srtt_us >> 4)) < 0)
goto send_now;
If next ACK is expected to come in more than 1 ms, we should
not defer because we prefer a smooth ACK clocking.
While blamed commit was a step in the good direction, it was not
generic enough.
Another patch fixing TCP_TX_DELAY for established flows
will be proposed when net-next reopens.
Fixes: 50c8339e92 ("tcp: tso: restore IW10 after TSO autosizing")
Reported-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Tested-by: Neal Cardwell <ncardwell@google.com>
Link: https://patch.msgid.link/20251011115742.1245771-1-edumazet@google.com
[pabeni@redhat.com: fixed whitespace issue]
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Temporarily change CONFIG_HID_HAPTIC to be bool instead of tristate, until
we implement a permanent solution.
Recently the CONFIG_HID_HAPTIC Kconfig option was reported as causing
the following build errors:
MODPOST Module.symvers
ERROR: modpost: "hid_haptic_init" [drivers/hid/hid-multitouch.ko] undefined!
ERROR: modpost: "hid_haptic_pressure_increase" [drivers/hid/hid-multitouch.ko] undefined!
ERROR: modpost: "hid_haptic_check_pressure_unit" [drivers/hid/hid-multitouch.ko] undefined!
ERROR: modpost: "hid_haptic_input_configured" [drivers/hid/hid-multitouch.ko] undefined!
ERROR: modpost: "hid_haptic_input_mapping" [drivers/hid/hid-multitouch.ko] undefined!
ERROR: modpost: "hid_haptic_feature_mapping" [drivers/hid/hid-multitouch.ko] undefined!
ERROR: modpost: "hid_haptic_pressure_reset" [drivers/hid/hid-multitouch.ko] undefined!
make[3]: *** [/home/thl/var/linux.dev/scripts/Makefile.modpost:147: Module.symvers] Error 1
when the kernel is compiled with the following configuration:
CONFIG_HID=y
CONFIG_HID_MULTITOUCH=m
CONFIG_HID_HAPTIC=m
To resolve this, temporarily change the CONFIG_HID_HAPTIC option to be
bool, until we arrive at a permanent solution to enable CONFIG_HID_HAPTIC
to be tristate.
For a more detailed discussion, see [1].
[1]: https://lore.kernel.org/linux-input/auypydfkhx2eg7vp764way4batdilzc35inqda3exwzs3tk3ff@oagat6g46zto/
Signed-off-by: Jonathan Denose <jdenose@google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
rtl8152_driver_init() is missing the error handling.
When rtl8152_driver registration fails, rtl8152_cfgselector_driver
should be deregistered.
Fixes: ec51fbd1b8 ("r8152: add USB device driver for config selection")
Cc: stable@vger.kernel.org
Signed-off-by: Yi Cong <yicong@kylinos.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251011082415.580740-1-yicongsrfy@163.com
[pabeni@redhat.com: clarified the commit message]
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The tablet is similar to the 22R Pro, but with a few annoying
differences. Its descriptors are bigger because of the tablet's split
coordinate system, I guess it's just that large. Thankfully, this is
easy enough to support as all we have to do is shift bytes around.
To help code re-use, I changed the signature of
uclogic_params_init_ugee_xppen_pro to accept a pen descriptor so we
didn't create yet-another initialization function.
I have been testing this locally for a month or so and it works great,
and also corroborated this with a few other testers. Since this touches
my 22R Pro code, I have tested and checked that it didn't regress that
device.
Signed-off-by: Joshua Goins <josh@redstrate.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
