[Why & How]
Although it's dummy updates of surface update for committing stream
updates, we should not have dummy_updates[j].surface all indicating
to the same surface under multiple surfaces case. Otherwise,
copy_surface_update_to_plane() in update_planes_and_stream_state()
will update to the same surface only.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
System will try to apply idle power optimizations setting during
system resume. But system power state is still in D3 state, and
it will cause the idle power optimizations command not actually
to be sent to DMUB and cause some platforms to go into IPS.
[How]
Set power state to D0 first before calling the
dc_dmub_srv_apply_idle_power_optimizations(dm->dc, false)
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use U64 for accumulation counter in gpu metrics for smu_v13_0_6 and
smu_v13_0_12
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add accumulation counter and firmware timestamp to partition metrics for
smu_v13_0_6 & smu_v13_0_12
v2: Use U64 for accumulation counter (Lijo)
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Everything:
Total patches: 325
Reviews/patch: 1.39
Reviewed rate: 72%
Excluding DAMON:
Total patches: 262
Reviews/patch: 1.63
Reviewed rate: 82%
Excluding DAMON and zram:
Total patches: 248
Reviews/patch: 1.72
Reviewed rate: 86%
- The 14 patch series "powerpc/64s: do not re-activate batched TLB
flush" from Alexander Gordeev makes arch_{enter|leave}_lazy_mmu_mode()
nest properly.
It adds a generic enter/leave layer and switches architectures to use
it. Various hacks were removed in the process.
- The 7 patch series "zram: introduce compressed data writeback" from
Richard Chang and Sergey Senozhatsky implements data compression for
zram writeback.
- The 8 patch series "mm: folio_zero_user: clear page ranges" from David
Hildenbrand adds clearing of contiguous page ranges for hugepages.
Large improvements during demand faulting are demonstrated.
- The 2 patch series "memcg cleanups" from Chen Ridong tideis up some
memcg code.
- The 12 patch series "mm/damon: introduce {,max_}nr_snapshots and
tracepoint for damos stats" from SeongJae Park improves DAMOS stat's
provided information, deterministic control, and readability.
- The 3 patch series "selftests/mm: hugetlb cgroup charging: robustness
fixes" from Li Wang fixes a few issues in the hugetlb cgroup charging
selftests.
- The 5 patch series "Fix va_high_addr_switch.sh test failure - again"
from Chunyu Hu addresses several issues in the va_high_addr_switch test.
- The 5 patch series "mm/damon/tests/core-kunit: extend existing test
scenarios" from Shu Anzai improves the KUnit test coverage for DAMON.
- The 2 patch series "mm/khugepaged: fix dirty page handling for
MADV_COLLAPSE" from Shivank Garg fixes a glitch in khugepaged which was
causing madvise(MADV_COLLAPSE) to transiently return -EAGAIN.
- The 29 patch series "arch, mm: consolidate hugetlb early reservation"
from Mike Rapoport reworks and consolidates a pile of straggly code
related to reservation of hugetlb memory from bootmem and creation of
CMA areas for hugetlb.
- The 9 patch series "mm: clean up anon_vma implementation" from Lorenzo
Stoakes cleans up the anon_vma implementation in various ways.
- The 3 patch series "tweaks for __alloc_pages_slowpath()" from
Vlastimil Babka does a little streamlining of the page allocator's
slowpath code.
- The 8 patch series "memcg: separate private and public ID namespaces"
from Shakeel Butt cleans up the memcg ID code and prevents the
internal-only private IDs from being exposed to userspace.
- The 6 patch series "mm: hugetlb: allocate frozen gigantic folio" from
Kefeng Wang cleans up the allocation of frozen folios and avoids some
atomic refcount operations.
- The 11 patch series "mm/damon: advance DAMOS-based LRU sorting" from
SeongJae Park improves DAMOS's movement of memory betewwn the active and
inactive LRUs and adds auto-tuning of the ratio-based quotas and of
monitoring intervals.
- The 18 patch series "Support page table check on PowerPC" from Andrew
Donnellan makes CONFIG_PAGE_TABLE_CHECK_ENFORCED work on powerpc.
- The 3 patch series "nodemask: align nodes_and{,not} with underlying
bitmap ops" from Yury Norov makes nodes_and() and nodes_andnot()
propagate the return values from the underlying bit operations, enabling
some cleanup in calling code.
- The 5 patch series "mm/damon: hide kdamond and kdamond_lock from API
callers" from SeongJae Park cleans up some DAMON internal interfaces.
- The 4 patch series "mm/khugepaged: cleanups and scan limit fix" from
Shivank Garg does some cleanup work in khupaged and fixes a scan limit
accounting issue.
- The 24 patch series "mm: balloon infrastructure cleanups" from David
Hildenbrand goes to town on the balloon infrastructure and its page
migration function. Mainly cleanups, also some locking simplification.
- The 2 patch series "mm/vmscan: add tracepoint and reason for
kswapd_failures reset" from Jiayuan Chen adds additional tracepoints to
the page reclaim code.
- The 3 patch series "Replace wq users and add WQ_PERCPU to
alloc_workqueue() users" from Marco Crivellari is part of Marco's
kernel-wide migration from the legacy workqueue APIs over to the
preferred unbound workqueues.
- The 9 patch series "Various mm kselftests improvements/fixes" from
Kevin Brodsky provides various unrelated improvements/fixes for the mm
kselftests.
- The 5 patch series "mm: accelerate gigantic folio allocation" from
Kefeng Wang greatly speeds up gigantic folio allocation, mainly by
avoiding unnecessary work in pfn_range_valid_contig().
- The 5 patch series "selftests/damon: improve leak detection and wss
estimation reliability" from SeongJae Park improves the reliability of
two of the DAMON selftests.
- The 8 patch series "mm/damon: cleanup kdamond, damon_call(), damos
filter and DAMON_MIN_REGION" from SeongJae Park does some cleanup work
in the core DAMON code.
- The 8 patch series "Docs/mm/damon: update intro, modules, maintainer
profile, and misc" from SeongJae Park performs maintenance work on the
DAMON documentation.
- The 10 patch series "mm: add and use vma_assert_stabilised() helper"
from Lorenzo Stoakes refactors and cleans up the core VMA code. The
main aim here is to be able to use the mmap write lock's lockdep state
to perform various assertions regarding the locking which the VMA code
requires.
- The 19 patch series "mm, swap: swap table phase II: unify swapin use"
from Kairui Song removes some old swap code (swap cache bypassing and
swap synchronization) which wasn't working very well. Various other
cleanups and simplifications were made. The end result is a 20% speedup
in one benchmark.
- The 8 patch series "enable PT_RECLAIM on more 64-bit architectures"
from Qi Zheng makes PT_RECLAIM available on 64-bit alpha, loongarch,
mips, parisc, um, Various cleanups were performed along the way.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaY1HfAAKCRDdBJ7gKXxA
jqhZAP9H8ZlKKqCEgnr6U5XXmJ63Ep2FDQpl8p35yr9yVuU9+gEAgfyWiJ43l1fP
rT0yjsUW3KQFBi/SEA3R6aYarmoIBgI=
=+HLt
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2026-02-11-19-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- "powerpc/64s: do not re-activate batched TLB flush" makes
arch_{enter|leave}_lazy_mmu_mode() nest properly (Alexander Gordeev)
It adds a generic enter/leave layer and switches architectures to use
it. Various hacks were removed in the process.
- "zram: introduce compressed data writeback" implements data
compression for zram writeback (Richard Chang and Sergey Senozhatsky)
- "mm: folio_zero_user: clear page ranges" adds clearing of contiguous
page ranges for hugepages. Large improvements during demand faulting
are demonstrated (David Hildenbrand)
- "memcg cleanups" tidies up some memcg code (Chen Ridong)
- "mm/damon: introduce {,max_}nr_snapshots and tracepoint for damos
stats" improves DAMOS stat's provided information, deterministic
control, and readability (SeongJae Park)
- "selftests/mm: hugetlb cgroup charging: robustness fixes" fixes a few
issues in the hugetlb cgroup charging selftests (Li Wang)
- "Fix va_high_addr_switch.sh test failure - again" addresses several
issues in the va_high_addr_switch test (Chunyu Hu)
- "mm/damon/tests/core-kunit: extend existing test scenarios" improves
the KUnit test coverage for DAMON (Shu Anzai)
- "mm/khugepaged: fix dirty page handling for MADV_COLLAPSE" fixes a
glitch in khugepaged which was causing madvise(MADV_COLLAPSE) to
transiently return -EAGAIN (Shivank Garg)
- "arch, mm: consolidate hugetlb early reservation" reworks and
consolidates a pile of straggly code related to reservation of
hugetlb memory from bootmem and creation of CMA areas for hugetlb
(Mike Rapoport)
- "mm: clean up anon_vma implementation" cleans up the anon_vma
implementation in various ways (Lorenzo Stoakes)
- "tweaks for __alloc_pages_slowpath()" does a little streamlining of
the page allocator's slowpath code (Vlastimil Babka)
- "memcg: separate private and public ID namespaces" cleans up the
memcg ID code and prevents the internal-only private IDs from being
exposed to userspace (Shakeel Butt)
- "mm: hugetlb: allocate frozen gigantic folio" cleans up the
allocation of frozen folios and avoids some atomic refcount
operations (Kefeng Wang)
- "mm/damon: advance DAMOS-based LRU sorting" improves DAMOS's movement
of memory betewwn the active and inactive LRUs and adds auto-tuning
of the ratio-based quotas and of monitoring intervals (SeongJae Park)
- "Support page table check on PowerPC" makes
CONFIG_PAGE_TABLE_CHECK_ENFORCED work on powerpc (Andrew Donnellan)
- "nodemask: align nodes_and{,not} with underlying bitmap ops" makes
nodes_and() and nodes_andnot() propagate the return values from the
underlying bit operations, enabling some cleanup in calling code
(Yury Norov)
- "mm/damon: hide kdamond and kdamond_lock from API callers" cleans up
some DAMON internal interfaces (SeongJae Park)
- "mm/khugepaged: cleanups and scan limit fix" does some cleanup work
in khupaged and fixes a scan limit accounting issue (Shivank Garg)
- "mm: balloon infrastructure cleanups" goes to town on the balloon
infrastructure and its page migration function. Mainly cleanups, also
some locking simplification (David Hildenbrand)
- "mm/vmscan: add tracepoint and reason for kswapd_failures reset" adds
additional tracepoints to the page reclaim code (Jiayuan Chen)
- "Replace wq users and add WQ_PERCPU to alloc_workqueue() users" is
part of Marco's kernel-wide migration from the legacy workqueue APIs
over to the preferred unbound workqueues (Marco Crivellari)
- "Various mm kselftests improvements/fixes" provides various unrelated
improvements/fixes for the mm kselftests (Kevin Brodsky)
- "mm: accelerate gigantic folio allocation" greatly speeds up gigantic
folio allocation, mainly by avoiding unnecessary work in
pfn_range_valid_contig() (Kefeng Wang)
- "selftests/damon: improve leak detection and wss estimation
reliability" improves the reliability of two of the DAMON selftests
(SeongJae Park)
- "mm/damon: cleanup kdamond, damon_call(), damos filter and
DAMON_MIN_REGION" does some cleanup work in the core DAMON code
(SeongJae Park)
- "Docs/mm/damon: update intro, modules, maintainer profile, and misc"
performs maintenance work on the DAMON documentation (SeongJae Park)
- "mm: add and use vma_assert_stabilised() helper" refactors and cleans
up the core VMA code. The main aim here is to be able to use the mmap
write lock's lockdep state to perform various assertions regarding
the locking which the VMA code requires (Lorenzo Stoakes)
- "mm, swap: swap table phase II: unify swapin use" removes some old
swap code (swap cache bypassing and swap synchronization) which
wasn't working very well. Various other cleanups and simplifications
were made. The end result is a 20% speedup in one benchmark (Kairui
Song)
- "enable PT_RECLAIM on more 64-bit architectures" makes PT_RECLAIM
available on 64-bit alpha, loongarch, mips, parisc, and um. Various
cleanups were performed along the way (Qi Zheng)
* tag 'mm-stable-2026-02-11-19-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (325 commits)
mm/memory: handle non-split locks correctly in zap_empty_pte_table()
mm: move pte table reclaim code to memory.c
mm: make PT_RECLAIM depends on MMU_GATHER_RCU_TABLE_FREE
mm: convert __HAVE_ARCH_TLB_REMOVE_TABLE to CONFIG_HAVE_ARCH_TLB_REMOVE_TABLE config
um: mm: enable MMU_GATHER_RCU_TABLE_FREE
parisc: mm: enable MMU_GATHER_RCU_TABLE_FREE
mips: mm: enable MMU_GATHER_RCU_TABLE_FREE
LoongArch: mm: enable MMU_GATHER_RCU_TABLE_FREE
alpha: mm: enable MMU_GATHER_RCU_TABLE_FREE
mm: change mm/pt_reclaim.c to use asm/tlb.h instead of asm-generic/tlb.h
mm/damon/stat: remove __read_mostly from memory_idle_ms_percentiles
zsmalloc: make common caches global
mm: add SPDX id lines to some mm source files
mm/zswap: use %pe to print error pointers
mm/vmscan: use %pe to print error pointers
mm/readahead: fix typo in comment
mm: khugepaged: fix NR_FILE_PAGES and NR_SHMEM in collapse_file()
mm: refactor vma_map_pages to use vm_insert_pages
mm/damon: unify address range representation with damon_addr_range
mm/cma: replace snprintf with strscpy in cma_new_area
...
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAmmMc1oACgkQnJ2qBz9k
QNnwcQf/cV9BoA/RLKoYQ9WBQYIB5DCWW0JK+vsWFFdRH/imgLNZZeCZ5PscKvnv
rjfo1HkrcQ4T+jjAQ4geRA828SXqmcKAiOQ9CTmuy+0Xgjkd79SjJ+C1nT+I0CHA
/NnPWJktNX8jbpuhnBITo3J1eZ1tnuTUaHrQJRuBBKM1sPd0RvzZTVmteq66hxoA
1eD0HN/10Egh2l3wGMpIOTbtK505Jyxbbx1iKCz9jpqIQtsjyH/0NgBfkdLKai1C
AKTaAneohH4meo6yPWrR1kRDSNDpcRVrcYcchuW+d6Oi1s1aPBBWxW9OxprYLpo+
x6E3njVixr+lz5xTfXjObBGFkl/LKQ==
=Zhns
-----END PGP SIGNATURE-----
Merge tag 'fs_for_v6.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull quota and isofs updates from Jan Kara:
- a fix for quotactl livelock during filesystem freezing
- a small improvement for isofs
- a documentation fix for ext2
* tag 'fs_for_v6.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
isofs: support full length file names (255 instead of 253)
quota: fix livelock between quotactl and freeze_super
doc : fix a broken link in ext2.rst
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAmmMa34ACgkQnJ2qBz9k
QNnzUgf/VwTdYD3PKsYxhp6XKBxxQr9VHVkMEceeF/gzUxDR5Wc2/MDOoeJxsrAO
WXBiy+XvmiUQ8npVyLo5yeeJCeHlg7oOZVe6dhU7y0nCyQI30x2oFGk+u7h/jtrF
XJJ3xuQ5l017W5yMtbT+kUn0Sx4TwNTj++eIa/i/tCvVcUuUNwA+BUSAdRE1an2v
HgNuTx0yvvEMUT2g+Eh/HyyXnCCeb1aJYM9p01+n2aHl9hlegIEUPZM5NshLLxiX
0WKnomrH93b9CFiGo4XB2aSmVE39hu7WQNCYqHLUH6M5GgqCDoAQLC3oHsE2wLUC
3R3nKTXkvmyCpFI+yqddwp1guKPFYQ==
=GimZ
-----END PGP SIGNATURE-----
Merge tag 'fsnotify_for_v6.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull fsnotify updates from Jan Kara:
"A set of fixes to shutdown fsnotify subsystem before invalidating
dcache thus addressing some nasty possible races"
* tag 'fsnotify_for_v6.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
fsnotify: Shutdown fsnotify before destroying sb's dcache
fsnotify: Use connector list for destroying inode marks
fsnotify: Track inode connectors for a superblock
fsverity cleanups, speedup, and memory usage optimization from
Christoph Hellwig:
- Move some logic into common code
- Fix btrfs to reject truncates of fsverity files
- Improve the readahead implementation
- Store each inode's fsverity_info in a hash table instead of using a
pointer in the filesystem-specific part of the inode.
This optimizes for memory usage in the usual case where most files
don't have fsverity enabled.
- Look up the fsverity_info fewer times during verification, to
amortize the hash table overhead
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCaY0nZhQcZWJpZ2dlcnNA
a2VybmVsLm9yZwAKCRDzXCl4vpKOK/AVAP9wSLEYsG3dqnNIHjIvLeK+9NC3Ni4d
m+fvT1JfuideOwEA9r2EfztusLU5iyqWJlHyxekibXItUDgYGltaYb7eXAU=
=a+To
-----END PGP SIGNATURE-----
Merge tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux
Pull fsverity updates from Eric Biggers:
"fsverity cleanups, speedup, and memory usage optimization from
Christoph Hellwig:
- Move some logic into common code
- Fix btrfs to reject truncates of fsverity files
- Improve the readahead implementation
- Store each inode's fsverity_info in a hash table instead of using a
pointer in the filesystem-specific part of the inode.
This optimizes for memory usage in the usual case where most files
don't have fsverity enabled.
- Look up the fsverity_info fewer times during verification, to
amortize the hash table overhead"
* tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux:
fsverity: remove inode from fsverity_verification_ctx
fsverity: use a hashtable to find the fsverity_info
btrfs: consolidate fsverity_info lookup
f2fs: consolidate fsverity_info lookup
ext4: consolidate fsverity_info lookup
fs: consolidate fsverity_info lookup in buffer.c
fsverity: push out fsverity_info lookup
fsverity: deconstify the inode pointer in struct fsverity_info
fsverity: kick off hash readahead at data I/O submission time
ext4: move ->read_folio and ->readahead to readpage.c
readahead: push invalidate_lock out of page_cache_ra_unbounded
fsverity: don't issue readahead for non-ENOENT errors from __filemap_get_folio
fsverity: start consolidating pagecache code
fsverity: pass struct file to ->write_merkle_tree_block
f2fs: don't build the fsverity work handler for !CONFIG_FS_VERITY
ext4: don't build the fsverity work handler for !CONFIG_FS_VERITY
fs,fsverity: clear out fsverity_info from common code
fs,fsverity: reject size changes on fsverity files in setattr_prepare
* Avoid unnecessary cache invadiation in the extent status cache
(es_cache) when adding extents to be cached in the es_cache and we
are not changing the extent tree.
* Add a sysfs parameter, err_report_sec, to control how frequently
to log a warning message that file system inconsistency has been
detected. (Previously we logged the warning message every 24
hours.)
* Avoid unnecessary forced ordered writes when appending to a file
when delayed allocation is enabled.
* Defer splitting unwritten extents to I/O completion to improve
write performance of concurrent direct I/O writes to multiple
files.
* Refactor and add kunit tests to the extent splitting and
conversion code paths.
Various Bug Fixes
* Fix a panic when the debugging DOUBLE_CHECK macro is defined.
* Avoid using fast commit for rare and complex file system
operations to make fast commit easier to reason about. This can
also avoid some corner cases that could result in file system
inconsistency if there is a crash between the fast commit before a
subsequent full commit.
* Fix memory leaks in error paths
* Fix a false positive reports caused when running stress tests
using mixed huge-page workloads caused by a race between page
migration and bitmap updates.
* Fix a potential recursion into file system reclaim when evicting
an inode when fast commit is enabled.
* Fix a warning caused by a potential double decrement to the dirty
clusters counter when executing FS_IOC_SHUTDOWN when running a
stress test.
* Enable mballoc optimzied scanning regardless whether the inode is
using indirect blocks or extent trees to map blocks.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmmN9DEACgkQ8vlZVpUN
gaNMFggAl4vUlkNjIkvsVovTroaCE/xXhO2UIdvQTUXQX+8U6i8Zft+F1ZgLWvVx
fz84w9k0t47MHixYOF/+55JK3ljA7oufsqS60eZodpe//8/uK2C6tvtAJIqGJBjw
tp306bidXSYhOVA3PqPSy0YZCIjMI08xiEYRio68VjpoHHJkr79K6eN+KcFOIsuF
a+OfZN//IfOA1F53Gu9nO+X9XSBJ+yiztWIRhCS+DBKBC/bIg6ecybQKXOtvjvpw
ggrIXQtHxhekqTjp2q467cNI51+s9aizM8RhnpP5DmS7e9U0Y/AsJ/5My5eJrimM
+jKLpAQqKZK+IFuKxwEgLCAe5fOsfw==
=eLR/
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"New features and improvements for the ext4 file system
- Avoid unnecessary cache invalidation in the extent status cache
(es_cache) when adding extents to be cached in the es_cache and we
are not changing the extent tree
- Add a sysfs parameter, err_report_sec, to control how frequently to
log a warning message that file system inconsistency has been
detected (Previously we logged the warning message every 24 hours)
- Avoid unnecessary forced ordered writes when appending to a file
when delayed allocation is enabled
- Defer splitting unwritten extents to I/O completion to improve
write performance of concurrent direct I/O writes to multiple files
- Refactor and add kunit tests to the extent splitting and conversion
code paths
Various Bug Fixes:
- Fix a panic when the debugging DOUBLE_CHECK macro is defined
- Avoid using fast commit for rare and complex file system operations
to make fast commit easier to reason about. This can also avoid
some corner cases that could result in file system inconsistency if
there is a crash between the fast commit before a subsequent full
commit
- Fix memory leaks in error paths
- Fix a false positive reports caused when running stress tests using
mixed huge-page workloads caused by a race between page migration
and bitmap updates
- Fix a potential recursion into file system reclaim when evicting an
inode when fast commit is enabled
- Fix a warning caused by a potential double decrement to the dirty
clusters counter when executing FS_IOC_SHUTDOWN when running a
stress test
- Enable mballoc optimized scanning regardless whether the inode is
using indirect blocks or extent trees to map blocks"
* tag 'ext4_for_linus-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (45 commits)
et4: allow zeroout when doing written to unwritten split
ext4: refactor split and convert extents
ext4: refactor zeroout path and handle all cases
ext4: propagate flags to ext4_convert_unwritten_extents_endio()
ext4: propagate flags to convert_initialized_extent()
ext4: add extent status cache support to kunit tests
ext4: kunit tests for higher level extent manipulation functions
ext4: kunit tests for extent splitting and conversion
ext4: use optimized mballoc scanning regardless of inode format
ext4: always allocate blocks only from groups inode can use
ext4: fix dirtyclusters double decrement on fs shutdown
ext4: fast commit: make s_fc_lock reclaim-safe
ext4: fix e4b bitmap inconsistency reports
ext4: remove redundant NULL check after __GFP_NOFAIL
ext4: remove EXT4_GET_BLOCKS_IO_CREATE_EXT
ext4: simplify the mapping query logic in ext4_iomap_begin()
ext4: remove unused unwritten parameter in ext4_dio_write_iter()
ext4: remove useless ext4_iomap_overwrite_ops
ext4: avoid starting handle when dio writing an unwritten extent
ext4: don't split extent before submitting I/O
...
The cpu set is dynamically allocated for nr_cpu_ids using CPU_ALLOC(),
so the size passed to sched_setaffinity() should be CPU_ALLOC_SIZE()
rather than sizeof(cpu_set_t). Valgrind flagged this as accessing
unaddressable bytes past the allocation.
Signed-off-by: David Carlier <devnexen@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The local cnts array in read_stats() is not initialized before being
accumulated into per-CPU stats, which may lead to reading garbage
values. Zero it out with memset alongside the existing stats array
initialization.
Signed-off-by: David Carlier <devnexen@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
When a task is migrated out of a css_set, cgroup_migrate_add_task()
first moves it from cset->tasks to cset->mg_tasks via:
list_move_tail(&task->cg_list, &cset->mg_tasks);
If a css_task_iter currently has it->task_pos pointing to this task,
css_set_move_task() calls css_task_iter_skip() to keep the iterator
valid. However, since the task has already been moved to ->mg_tasks,
the iterator is advanced relative to the mg_tasks list instead of the
original tasks list. As a result, remaining tasks on cset->tasks, as
well as tasks queued on cset->mg_tasks, can be skipped by iteration.
Fix this by calling css_set_skip_task_iters() before unlinking
task->cg_list from cset->tasks. This advances all active iterators to
the next task on cset->tasks, so iteration continues correctly even
when a task is concurrently being migrated.
This race is hard to hit in practice without instrumentation, but it
can be reproduced by artificially slowing down cgroup_procs_show().
For example, on an Android device a temporary
/sys/kernel/cgroup/cgroup_test knob can be added to inject a delay
into cgroup_procs_show(), and then:
1) Spawn three long-running tasks (PIDs 101, 102, 103).
2) Create a test cgroup and move the tasks into it.
3) Enable a large delay via /sys/kernel/cgroup/cgroup_test.
4) In one shell, read cgroup.procs from the test cgroup.
5) Within the delay window, in another shell migrate PID 102 by
writing it to a different cgroup.procs file.
Under this setup, cgroup.procs can intermittently show only PID 101
while skipping PID 103. Once the migration completes, reading the
file again shows all tasks as expected.
Note that this change does not allow removing the existing
css_set_skip_task_iters() call in css_set_move_task(). The new call
in cgroup_migrate_add_task() only handles iterators that are racing
with migration while the task is still on cset->tasks. Iterators may
also start after the task has been moved to cset->mg_tasks. If we
dropped css_set_skip_task_iters() from css_set_move_task(), such
iterators could keep task_pos pointing to a migrating task, causing
css_task_iter_advance() to malfunction on the destination css_set,
up to and including crashes or infinite loops.
The race window between migration and iteration is very small, and
css_task_iter is not on a hot path. In the worst case, when an
iterator is positioned on the first thread of the migrating process,
cgroup_migrate_add_task() may have to skip multiple tasks via
css_set_skip_task_iters(). However, this only happens when migration
and iteration actually race, so the performance impact is negligible
compared to the correctness fix provided here.
Fixes: b636fd38dc ("cgroup: Implement css_task_iter_skip()")
Cc: stable@vger.kernel.org # v5.2+
Signed-off-by: Qingye Zhao <zhaoqingye@honor.com>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
After ebe091ad81 ("PCI: Use pbus_select_window_for_type() during IO
window sizing") and ae88d0b9c5 ("PCI: Use pbus_select_window_for_type()
during mem window sizing"), many bridge windows can't get resources
assigned:
pci 0006:05:00.0: bridge window [??? 0x00001000-0x00001fff flags 0x20080000]: can't assign; no space
pci 0006:05:00.0: bridge window [??? 0x00001000-0x00001fff flags 0x20080000]: failed to assign
Those commits replace find_bus_resource_of_type() with
pbus_select_window_for_type(), and the latter lacks resource type
validation.
Add the resource type validation back to pbus_select_window_for_type() to
match the original behavior.
Fixes: 74afce3dfc ("PCI: Add bridge window selection functions")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=221072
Signed-off-by: Kai-Heng Feng <kaihengf@nvidia.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20260210142058.82701-1-kaihengf@nvidia.com
both sent in by Thorsten Blum.
debugfs - replace strcpy with memcpy where the string lengths are known,
and replace other uses of strcpy with strscpy.
xattr - replace strcpy with strscpy.
-----BEGIN PGP SIGNATURE-----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=nrRd
-----END PGP SIGNATURE-----
Merge tag 'for-linus-7.0-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux
Pull orangefs updates from Mike Marshall:
- Fixes for string handling in orangefs-debugfs.c and xattr.c (Thorsten
Blum)
* tag 'for-linus-7.0-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux:
fs/orangefs: Replace deprecated strcpy with memcpy + strscpy
orangefs: Replace deprecated strcpy with strscpy
-----BEGIN PGP SIGNATURE-----
iQGzBAABCgAdFiEE6fsu8pdIjtWE/DpLiiy9cAdyT1EFAmmMlx0ACgkQiiy9cAdy
T1H39Qv+IYc4hUuM6eOMftlzGrVkSaSzjQe5bsXX/1UYyiwbvOyUqYJVFIm+HxAd
3EvtlBGfpZ5Xm1Un3CS8pWZMl2qbDRr2l1T9gPpe4qH7ILWKMzJBmEzOm5nro+fy
Qu+URZ01F0JVbAj/zTU5Wuqq/BQmiHNRPycNnmXofP8rWaPTSMB92dnThC8++K3Q
v5J0jxzrfsBtAZ1Tt9lisX5BfGkYEyYBKoD0xB7h8o9heXrsRu/rJbSWSsQoYXiD
8LhICT6On3nbq/5H7tkuv5AieBOdwaIumwpweK5JTJv2AA51+BU4qy4pyeDFVndc
kxdyUxJUloVn5xKvCNoOrQWtJJyW8sULebWjudJuvuktJcGiDzZV/bnXI2CfU0MF
R2ZdBjUmJhxr+xCXGIxdjnhAavnHh81yF4mAA6r9TnLgRtdkMFcc7+9FfwjxQYf4
wHbXCZWpEz4CVFGiy2GABQ0HdVrt5vVuGW7rBO6pUlUjUeR/wvQieYNBhTjwlN0X
Dgr4qlhN
=VTb9
-----END PGP SIGNATURE-----
Merge tag 'v7.0-rc-part1-ksmbd-and-smbdirect-fixes' of git://git.samba.org/ksmbd
Pull smb server and smbdirect updates from Steve French:
- Fix tcp connection leak
- Fix potential use after free when freeing multichannel
- Fix locking problem in showing channel list
- Locking improvement for tree connection
- Fix infinite loop when signing errors
- Add /proc interface for monitoring server state
- Fixes to avoid mixing iWarp and InfiniBand/RoCEv1/RoCEv2
port ranges used for smbdirect
- Fixes for smbdirect credit handling problems, these make
the connections more reliable
* tag 'v7.0-rc-part1-ksmbd-and-smbdirect-fixes' of git://git.samba.org/ksmbd: (32 commits)
ksmbd: fix non-IPv6 build
ksmbd: convert tree_conns_lock to rw_semaphore
ksmbd: fix missing chann_lock while iterating session channel list
ksmbd: add chann_lock to protect ksmbd_chann_list xarray
smb: server: correct value for smb_direct_max_fragmented_recv_size
smb: client: correct value for smbd_max_fragmented_recv_size
smb: server: fix leak of active_num_conn in ksmbd_tcp_new_connection()
ksmbd: add procfs interface for runtime monitoring and statistics
ksmbd: fix infinite loop caused by next_smb2_rcv_hdr_off reset in error paths
smb: server: make use of rdma_restrict_node_type()
smb: client: make use of rdma_restrict_node_type()
RDMA/core: introduce rdma_restrict_node_type()
smb: client: let send_done handle a completion without IB_SEND_SIGNALED
smb: client: let smbd_post_send_negotiate_req() use smbd_post_send()
smb: client: fix last send credit problem causing disconnects
smb: client: make use of smbdirect_socket.send_io.bcredits
smb: client: use smbdirect_send_batch processing
smb: client: introduce and use smbd_{alloc, free}_send_io()
smb: client: split out smbd_ib_post_send()
smb: client: port and use the wait_for_credits logic used by server
...
Kbuild changes
==============
* Drop '*_probe' pattern from modpost section check allowlist, which hid
legitimate warnings (Johan Hovold)
* Disable -Wtype-limits altogether, instead of enabling at W=2 (Vincent
Mailhol)
* Improve UAPI testing to skip testing headers that require a libc when
CONFIG_CC_CAN_LINK is not set, opening up testing of headers with no
libc dependencies to more environments (Thomas Weißschuh)
* Update gendwarfksyms documentation with required dependencies (Jihan
LIN)
* Reject invalid LLVM= values to avoid unintentionally falling back to
system toolchain (Thomas Weißschuh)
* Add a script to help run the kernel build process in a container for
consistent environments and testing (Guillaume Tucker)
* Simplify kallsyms by getting rid of the relative base (Ard Biesheuvel)
* Performance and usability improvements to scripts/make_fit.py (Simon
Glass)
* Minor various clean ups and fixes
Kconfig changes
===============
* Move XPM icons to individual files, clearing up GTK deprecation
warnings (Rostislav Krasny)
* Support
depends on FOO if BAR
as syntactic sugar for
depends on FOO || !BAR' (Nicolas Pitre, Graham Roff)
* Refactor merge_config.sh to use awk over shell/sed/grep, dramatically
speeding up processing large number of config fragments (Anders
Roxell, Mikko Rapeli)
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR74yXHMTGczQHYypIdayaRccAalgUCaYpgQwAKCRAdayaRccAa
liOGAQCqMI42YMLqljFcPu3B/3f43xhDBCXAhquPBIMhbgt+aAEAmmo3uMLHKSRV
XZDKkq13HMMV3Zlmrn5Xk/tzk+hkwwk=
=WYl4
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR74yXHMTGczQHYypIdayaRccAalgUCaY3/8AAKCRAdayaRccAa
loi3AP4nX5Jd1DHz+F+5ZGIRErtRwVeN6oagegTIi029H6ENFAD/c20+xB7jB+Gi
XGUytlJS8+I+A43Pv16ZR243OECGyw0=
=XjYX
-----END PGP SIGNATURE-----
Merge 7.0 Kbuild changes into kbuild-fixes
kbuild-fixes needs to be based on 6.19 to apply some fixes for
62089b8048 ("kbuild: rpm-pkg: Generate debuginfo package manually")
which landed in 6.19-rc1 but the new material of 7.0 needs fixes merged
as well.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Neil Brown and Jeff Layton contributed a dynamic thread pool sizing
mechanism for NFSD. The sunrpc layer now tracks minimum and maximum
thread counts per pool, and NFSD adjusts running thread counts based
on workload: idle threads exit after a timeout when the pool exceeds
its minimum, and new threads spawn automatically when all threads
are busy. Administrators control this behavior via the nfsdctl
netlink interface.
Rick Macklem, FreeBSD NFS maintainer, generously contributed server-
side support for the POSIX ACL extension to NFSv4, as specified in
draft-ietf-nfsv4-posix-acls. This extension allows NFSv4 clients to
get and set POSIX access and default ACLs using native NFSv4
operations, eliminating the need for sideband protocols. The feature
is gated by a Kconfig option since the IETF draft has not yet been
ratified.
Chuck Lever delivered numerous improvements to the xdrgen tool.
Error reporting now covers parsing, AST transformation, and invalid
declarations. Generated enum decoders validate incoming values
against valid enumerator lists. New features include pass-through
line support for embedding C directives in XDR specifications,
16-bit integer types, and program number definitions. Several code
generation issues were also addressed.
When an administrator revokes NFSv4 state for a filesystem via the
unlock_fs interface, ongoing async COPY operations referencing that
filesystem are now cancelled, with CB_OFFLOAD callbacks notifying
affected clients.
The remaining patches in this pull request are clean-ups and minor
optimizations. Sincere thanks to all contributors, reviewers,
testers, and bug reporters who participated in the v7.0 NFSD
development cycle.
-----BEGIN PGP SIGNATURE-----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=hqla
-----END PGP SIGNATURE-----
Merge tag 'nfsd-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd updates from Chuck Lever:
"Neil Brown and Jeff Layton contributed a dynamic thread pool sizing
mechanism for NFSD. The sunrpc layer now tracks minimum and maximum
thread counts per pool, and NFSD adjusts running thread counts based
on workload: idle threads exit after a timeout when the pool exceeds
its minimum, and new threads spawn automatically when all threads are
busy. Administrators control this behavior via the nfsdctl netlink
interface.
Rick Macklem, FreeBSD NFS maintainer, generously contributed server-
side support for the POSIX ACL extension to NFSv4, as specified in
draft-ietf-nfsv4-posix-acls. This extension allows NFSv4 clients to
get and set POSIX access and default ACLs using native NFSv4
operations, eliminating the need for sideband protocols. The feature
is gated by a Kconfig option since the IETF draft has not yet been
ratified.
Chuck Lever delivered numerous improvements to the xdrgen tool. Error
reporting now covers parsing, AST transformation, and invalid
declarations. Generated enum decoders validate incoming values against
valid enumerator lists. New features include pass-through line support
for embedding C directives in XDR specifications, 16-bit integer
types, and program number definitions. Several code generation issues
were also addressed.
When an administrator revokes NFSv4 state for a filesystem via the
unlock_fs interface, ongoing async COPY operations referencing that
filesystem are now cancelled, with CB_OFFLOAD callbacks notifying
affected clients.
The remaining patches in this pull request are clean-ups and minor
optimizations. Sincere thanks to all contributors, reviewers, testers,
and bug reporters who participated in the v7.0 NFSD development cycle"
* tag 'nfsd-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (45 commits)
NFSD: Add POSIX ACL file attributes to SUPPATTR bitmasks
NFSD: Add POSIX draft ACL support to the NFSv4 SETATTR operation
NFSD: Add support for POSIX draft ACLs for file creation
NFSD: Add support for XDR decoding POSIX draft ACLs
NFSD: Refactor nfsd_setattr()'s ACL error reporting
NFSD: Do not allow NFSv4 (N)VERIFY to check POSIX ACL attributes
NFSD: Add nfsd4_encode_fattr4_posix_access_acl
NFSD: Add nfsd4_encode_fattr4_posix_default_acl
NFSD: Add nfsd4_encode_fattr4_acl_trueform_scope
NFSD: Add nfsd4_encode_fattr4_acl_trueform
Add RPC language definition of NFSv4 POSIX ACL extension
NFSD: Add a Kconfig setting to enable support for NFSv4 POSIX ACLs
xdrgen: Implement pass-through lines in specifications
nfsd: cancel async COPY operations when admin revokes filesystem state
nfsd: add controls to set the minimum number of threads per pool
nfsd: adjust number of running nfsd threads based on activity
sunrpc: allow svc_recv() to return -ETIMEDOUT and -EBUSY
sunrpc: split new thread creation into a separate function
sunrpc: introduce the concept of a minimum number of threads per pool
sunrpc: track the max number of requested threads in a pool
...
In ovpn_net_xmit, after GSO segmentation and segment processing, the
first segment on the list is used to increment VPN TX statistics, which
fails to account for any subsequent segments in the chain.
Fix this by accumulating the length of every segment that successfully
passes skb_share_check into a tx_bytes variable. This ensures the peer
statistics accurately reflect the total data volume sent, regardless of
whether the original packet was segmented.
Fixes: 04ca14955f ("ovpn: store tunnel and transport statistics")
Signed-off-by: Ralf Lici <ralf@mandelbit.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
When building the skb_list in ovpn_net_xmit, skb_share_check will free
the original skb if it is shared. The current implementation continues
to use the stale skb pointer for subsequent operations:
- peer lookup,
- skb_dst_drop (even though all segments produced by skb_gso_segment
will have a dst attached),
- ovpn_peer_stats_increment_tx.
Fix this by moving the peer lookup and skb_dst_drop before segmentation
so that the original skb is still valid when used. Return early if all
segments fail skb_share_check and the list ends up empty.
Also switch ovpn_peer_stats_increment_tx to use skb_list.next; the next
patch fixes the stats logic.
Fixes: 08857b5ec5 ("ovpn: implement basic TX path (UDP)")
Signed-off-by: Ralf Lici <ralf@mandelbit.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
During initialization, we override socket callbacks and set sk_user_data
to an ovpn_socket instance. Currently, these two operations are
decoupled: callbacks are overridden before sk_user_data is set. While
existing callbacks perform safety checks for NULL or non-ovpn
sk_user_data, this condition causes a "half-formed" state where valid
packets arriving during attachment trigger error logs (e.g., "invoked on
non ovpn socket").
Set sk_user_data before overriding the callbacks so that it can be
accessed safely from them. Since we already check that the socket has no
sk_user_data before setting it, this remains safe even if an interrupt
accesses the socket after sk_user_data is set but before the callbacks
are overridden.
This also requires initializing all protocol-specific fields (such as
tcp_tx_work and peer links) before calling ovpn_socket_attach, ensuring
the ovpn_socket is fully formed before it becomes visible to any
callback.
Fixes: f6226ae7a0 ("ovpn: introduce the ovpn_socket object")
Signed-off-by: Ralf Lici <ralf@mandelbit.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
On partitioned systems, multiple TPMI instances may exist per package,
but RAPL registers are only valid on one instance since RAPL has
package-scope control. Other instances return invalid versions during
domain parsing, which is expected behavior on such systems.
Currently this generates a firmware bug warning:
intel_rapl_tpmi: [Firmware Bug]: Invalid version
Remove the FW_BUG tag, downgrade to pr_debug(), and update the message
to clarify that invalid versions are expected on partitioned systems
where only one instance can be valid.
Fixes: 9eef7f9da9 ("powercap: intel_rapl: Introduce RAPL TPMI interface driver")
Reported-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://patch.msgid.link/20260211223401.1575776-1-sathyanarayanan.kuppuswamy@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add a blank line after variable declarations in fatent.c and file.c.
This improves readability and makes code style more consistent
across the exfat subsystem.
Signed-off-by: William Hansen-Baird <william.hansen.baird@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Else-branch is unnecessary after return statement in if-branch.
Remove to enhance readability and reduce indentation.
Signed-off-by: William Hansen-Baird <william.hansen.baird@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
This patch introduces a count parameter to exfat_get_cluster, which
serves as an input parameter for the caller to specify the desired
number of clusters, and as an output parameter to store the length
of consecutive clusters.
This patch can improve read performance by reducing the number of
get_block calls in sequential read scenarios. speacially in small
cluster size.
According to my test data, the performance improvement is
approximately 10% when read FAT_CHAIN file with 512 bytes of
cluster size.
454 MB/s -> 511 MB/s
Suggested-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Signed-off-by: Chi Zhiling <chizhiling@kylinos.cn>
Reviewed-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Change exfat_cache_lookup to return the cluster number of the last
cluster before the next cache (i.e., the end of the current cache range)
or the given 'end' if there is no next cache. This allows the caller to
know whether the next cluster after the current cache is cached.
The function signature is changed to accept an 'end' parameter, which
is the upper bound of the search range. The function now stops early
if it finds a cache that starts within the current cache's tail, meaning
caches are contiguous. The return value is the cluster number at which
the next cache starts (minus one) or the original 'end' if no next cache
is found.
The new behavior is illustrated as follows:
cache: [ccccccc-------ccccccccc]
search: [..................]
return: ^
Signed-off-by: Chi Zhiling <chizhiling@kylinos.cn>
Reviewed-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
The current cache mechanism does not support reading clusters starting
from a file offset of zero. This patch enables that feature in
preparation for subsequent reads of contiguous clusters from offset zero.
1. support finding clusters with zero offset.
2. allow clusters with zero offset to be cached.
Signed-off-by: Chi Zhiling <chizhiling@kylinos.cn>
Reviewed-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
This patch introduces a parameter 'count' to support fetching multiple
clusters in exfat_map_cluster. The returned 'count' indicates the number
of consecutive clusters, or 0 when the input cluster offset is past EOF.
And the 'count' is also an input parameter for the caller to specify the
required number of clusters.
Only NO_FAT_CHAIN files enable multi-cluster fetching in this patch.
After this patch, the time proportion of exfat_get_block has decreased,
The performance data is as follows:
Cluster size: 512 bytes
Sequential read of a 30GB NO_FAT_CHAIN file:
2.4GB/s -> 2.5 GB/s
proportion of exfat_get_block:
10.8% -> 0.02%
Signed-off-by: Chi Zhiling <chizhiling@kylinos.cn>
Reviewed-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Yuezhang said: "exfat_map_cluster() is only used for files. The code
in this 'else' block is never executed and can be cleaned up."
Suggested-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Signed-off-by: Chi Zhiling <chizhiling@kylinos.cn>
Reviewed-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Since exfat_ent_get supports cache buffer head, we can use this option to
reduce sb_bread calls when fetching consecutive entries.
Signed-off-by: Chi Zhiling <chizhiling@kylinos.cn>
Reviewed-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Remove parameter 'fclus' and 'allow_eof':
- The fclus parameter is changed to a local variable as it is not
needed to be returned.
- The passed allow_eof parameter was always 1, remove it and the
associated error handling.
Signed-off-by: Chi Zhiling <chizhiling@kylinos.cn>
Reviewed-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
The cache_id remains unchanged on a cache miss; its value is always
exactly what was set by cache_init. Therefore, checking this value
again is meaningless.
Signed-off-by: Chi Zhiling <chizhiling@kylinos.cn>
Reviewed-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
The infinite cluster chain loop check is not work because the
loop will terminate when fclus reaches the parameter cluster,
and the parameter cluster value is never greater than
ei->valid_size.
The following relationship holds:
'fclus' < 'cluster' ≤ ei->valid_size ≤ sb->num_clusters
The check would only be triggered if a cluster number greater than
sb->num_clusters is passed, but no caller currently does this.
Signed-off-by: Chi Zhiling <chizhiling@kylinos.cn>
Reviewed-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Since exfat_ent_get support cache buffer head, let's apply it to
exfat_find_last_cluster.
Signed-off-by: Chi Zhiling <chizhiling@kylinos.cn>
Reviewed-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Since exfat_ent_get support cache buffer head, let's apply it to
exfat_count_num_clusters.
Signed-off-by: Chi Zhiling <chizhiling@kylinos.cn>
Reviewed-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
This patch is part 2 of cached buffer head for exfat_ent_get,
it introduces an argument for exfat_ent_get, and make sure this
routine releases buffer head refcount when any error return.
Signed-off-by: Chi Zhiling <chizhiling@kylinos.cn>
Reviewed-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
When multiple entries are obtained consecutively, these entries are mostly
stored adjacent to each other. this patch introduces a "last" parameter to
cache the last opened buffer head, and reuse it when possible, which
reduces the number of sb_bread() calls.
When the passed parameter "last" is NULL, it means cache option is
disabled, the behavior unchanged as it was.
Signed-off-by: Chi Zhiling <chizhiling@kylinos.cn>
Reviewed-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
During mmap write, exfat_page_mkwrite() currently extends
valid_size to the end of the VMA range. For a large mapping,
this can push valid_size far beyond the page that actually
triggered the fault, resulting in unnecessary writes.
valid_size only needs to extend to the end of the page
being written.
Signed-off-by: Yuling Dong <yuling-dong@qq.com>
Reviewed-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Change the type of 'ret' from unsigned int to int in
exfat_find_empty_entry(). Although the implicit type conversion
(int -> unsigned int -> int) does not cause actual bugs in
practice, using int directly is more appropriate for storing
error codes returned by exfat_alloc_cluster().
This improves code clarity and consistency with standard error
handling practices.
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
When creating the regulator object, associated with a consumer device,
the supply_name is string formatted into a statically sized buffer on
the stack, then strdup()'ed onto the heap.
Not only is the dance on the stack unnecessary, but when the device's
name is long we might not fit the constructed supply_name in the fixed
64 byte buffer on the stack.
One such case can be seen on the Qualcomm Rb3Gen2 board, where we find a
PCIe controller, with a PCIe switch, with a USB controller, with a USB
hub, consuming a regulator. In this example the dev->kobj.name itself is
62 characters long.
Drop the temporary buffer on the stack and kasprintf() the string
directly on the heap, both to simplify the code, and to remove the
length limitation.
Signed-off-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
Link: https://patch.msgid.link/20260211-regulator-supply-name-length-v1-1-3875541c1576@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The aw88261_dev_reg_update() function sets the Awinic registers in a
rather nonuniform way:
- most registers get directly overwritten from the firmware blob
- but a handful of them need more delicate logic to preserve
some bits from their current value, according to a register-
specific mask
For the latter, the logic is basically
NEW = (OLD & MASK) | (VAL & ~MASK)
However, the ~MASK value is hand-computed, and in the specific case
of the SYSCTRL register, in a buggy way.
This patch restores the proper ~MASK value.
Fixes: 028a2ae256 ("ASoC: codecs: Add aw88261 amplifier driver")
Signed-off-by: Alexandre Ferrieux <alexandre.ferrieux@orange.com>
Link: https://patch.msgid.link/20260211-aw88261-fwname-v1-1-e24e833a019d@fairphone.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Reference the dai-common.yaml schema to allow '#sound-dai-cells' and
"sound-name-prefix' to be used because asahi-kasei,ak5558 is codec DAI.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260211101009.2895296-1-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
per_cpu(cpc_desc_ptr, cpu) object is initialized for only the online
CPUs via acpi_soft_cpu_online() --> __acpi_processor_start() -->
acpi_cppc_processor_probe().
However, send_pcc_cmd() and acpi_get_psd_map() still iterate over all
possible CPUs. In acpi_get_psd_map(), encountering an offline CPU
returns -EFAULT, causing cppc_cpufreq initialization to fail.
This breaks systems booted with "nosmt" or "nosmt=force".
Fix by using for_each_online_cpu() in both functions.
Fixes: 80b8286aee ("ACPI / CPPC: support for batching CPPC requests")
Signed-off-by: Sean V Kelley <skelley@nvidia.com>
Link: https://patch.msgid.link/20260211212254.30190-1-skelley@nvidia.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The PWM2 on YB1-X90 tablets is used for keyboard backlight control but
it is disabled in the ACPI DSDT table. Add it to the override_status_ids
list to allow keyboard function control driver
(drivers/platform/x86/lenovo/yogabook.c) to use it.
Signed-off-by: Yauhen Kharuzhy <jekhor@gmail.com>
Link: https://patch.msgid.link/20260211222242.4101162-1-jekhor@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Now that all the callers of __blkdev_issue_discard() have been changed
to ignore its return value, change its return type from int to void.
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
__blkdev_issue_discard() always returns 0, making the error checking
in nvmet_bdev_discard_range() dead code.
Kill the function nvmet_bdev_discard_range() and call
__blkdev_issue_discard() directly from nvmet_bdev_execute_discard(),
since no error handling is needed anymore for __blkdev_issue_discard()
call.
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
__blkdev_issue_discard() always returns 0, making all error checking at
call sites dead code.
Simplify md to only check !discard_bio by ignoring the
__blkdev_issue_discard() value.
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When dma_iova_link() fails partway through mapping a request's bvec
list, the function breaks out of the loop without cleaning up
already mapped segments. Similarly, if dma_iova_sync() fails after
linking all segments, no cleanup is performed.
This leaves partial IOVA mappings in place. The completion path
attempts to unmap the full expected size via dma_iova_destroy() or
nvme_unmap_data(), but only a partial size was actually mapped,
leading to incorrect unmap operations.
Add an out_unlink error path that calls dma_iova_destroy() to clean
up partial mappings before returning failure. The dma_iova_destroy()
function handles both partial unlink and IOVA space freeing. It
correctly handles the mapped_len == 0 case (first dma_iova_link()
failure) by only freeing the IOVA allocation without attempting to
unmap.
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If iov_iter_extract_bvecs() returns an error or zero bytes extracted,
then the folio allocated is leaked on return. Ensure it's put before
returning.
Fixes: 8dd5e7c75d ("block: add helpers to bounce buffer an iov_iter into bios")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
