Use the %pe printk format specifier to report error pointers directly
instead of printing PTR_ERR() as a long value. This improves clarity,
produces more readable error messages.
This instance was flagged by the Coccinelle script
(misc/ptr_err_to_pe.cocci) as an opportunity to adopt %pe.
Found by: make coccicheck MODE=report M=mm/
No functional change intended.
Link: https://lkml.kernel.org/r/581a26f22fb4c6ce04aeb7ee0d703fe64454ac7f.1770230135.git.chandna.sahil@gmail.com
Signed-off-by: Sahil Chandna <chandna.sahil@gmail.com>
Acked-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Acked-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: David Hildenbrand (Red Hat) <david@kernel.org>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Use the %pe printk format specifier to report error pointers directly
instead of printing PTR_ERR() as a long value. This improves clarity,
produces more readable error messages.
This instance was flagged by the Coccinelle script
(misc/ptr_err_to_pe.cocci) as an opportunity to adopt %pe.
Found by: make coccicheck MODE=report M=mm/
No functional change intended
Link: https://lkml.kernel.org/r/80a6643657a60e75ddf48b4869b3e7fdc101f855.1770230135.git.chandna.sahil@gmail.com
Signed-off-by: Sahil Chandna <chandna.sahil@gmail.com>
Acked-by: David Hildenbrand (Red Hat) <david@kernel.org>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Yosry Ahmed <yosry.ahmed@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Fix a typo in a comment: max_readhead -> max_readahead.
Link: https://lkml.kernel.org/r/20260127152535.321951-1-cheng20011202@gmail.com
Signed-off-by: Wilson Zeng <cheng20011202@gmail.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In META's fleet, we observed high-level cgroups showing zero file memcg
stats while their descendants had non-zero values. Investigation using
drgn revealed that these parent cgroups actually had negative file stats,
aggregated from their children.
This issue became more frequent after deploying thp-always more widely,
pointing to a correlation with THP file collapsing. The root cause is
that collapse_file() assumes old folios and the new THP belong to the same
node and memcg. When this assumption breaks, stats become skewed. The
bug affects not just memcg stats but also per-numa stats, and not just
NR_FILE_PAGES but also NR_SHMEM.
The assumption breaks in scenarios such as:
1. Small folios allocated on one node while the THP gets allocated on a
different node.
2. A package downloader running in one cgroup populates the page cache,
while a job in a different cgroup executes the downloaded binary.
3. A file shared between processes in different cgroups, where one
process faults in the pages and khugepaged (or madvise(COLLAPSE))
collapses them on behalf of the other.
Fix the accounting by explicitly incrementing stats for the new THP and
decrementing stats for the old folios being replaced.
Link: https://lkml.kernel.org/r/20260130042925.2797946-1-shakeel.butt@linux.dev
Fixes: f3f0e1d215 ("khugepaged: add support of collapse for tmpfs/shmem pages")
Signed-off-by: Shakeel Butt <shakeel.butt@linux.dev>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Dev Jain <dev.jain@arm.com>
Reviewed-by: Barry Song <baohua@kernel.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Kiryl Shutsemau <kas@kernel.org>
Acked-by: David Hildenbrand (arm) <david@kernel.org>
Cc: Lance Yang <lance.yang@linux.dev>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Nico Pache <npache@redhat.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Usama Arif <usamaarif642@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
vma_map_pages currently calls vm_insert_page on each individual page in
the mapping, which creates significant overhead because we are repeatedly
spinlocking. Instead, we should batch insert pages using vm_insert_pages,
which amortizes the cost of the spinlock.
Tested through watching hardware accelerated video on a MTK ChromeOS
device. This particular path maps both a V4L2 buffer and a GEM allocated
buffer into userspace and converts the contents from one pixel format to
another. Both vb2_mmap() and mtk_gem_object_mmap() exercise this pathway.
Link: https://lkml.kernel.org/r/20260128225648.2938636-1-greenjustin@chromium.org
Signed-off-by: Justin Green <greenjustin@chromium.org>
Acked-by: Brian Geffon <bgeffon@google.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Arjun Roy <arjunroy@google.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Currently, DAMON defines two identical structures for representing address
ranges: damon_system_ram_region and damon_addr_range. Both structures
share the same semantic interpretation of a half-open interval [start,
end), where the start address is inclusive and the end address is
exclusive.
This duplication adds unnecessary redundancy and increases maintenance
overhead. This patch replaces all uses of damon_system_ram_region with
the more generic damon_addr_range structure, ensuring a unified type
representation for address ranges within the DAMON subsystem. The change
simplifies the codebase, improves readability, and avoids potential
inconsistencies in future modifications.
Link: https://lkml.kernel.org/r/20260129100845.281734-1-lienze@kylinos.cn
Signed-off-by: Enze Li <lienze@kylinos.cn>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Replace snprintf("%s", ...) with the faster and more direct strscpy().
Link: https://lkml.kernel.org/r/20260126174516.236968-1-thorsten.blum@linux.dev
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: David Hildenbrand <david@kernel.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Use the new zs_obj_read_sg_*() APIs in zswap_decompress(), instead of
zs_obj_read_*() APIs returning a linear address. The SG list is passed
directly to the crypto API, simplifying the logic and dropping the
workaround that copies highmem addresses to a buffer. The crypto API
should internally linearize the SG list if needed.
This avoids the memcpy() in zsmalloc for objects spanning multiple pages,
although an equivalent operation will be done internally by acomp/scomp.
However, in the future compression algorithms could support handling
discontiguous SG lists, completely eliminating the copying for spanning
objects.
Zsmalloc fills an SG list up to 2 entries in size, so change the input SG
list to fit 2 entries.
Update the incompressible entries path to use memcpy_from_sglist() to copy
the data to the folio. Opportunistically set dlen to PAGE_SIZE in the
same code path (rather that at the top of the function) to make it
clearer.
Drop the goto in zswap_compress() as the code now is not simple enough for
an if-else statement instead. Rename 'decomp_ret' to 'ret' and reuse it
to keep the intermediate return value of crypto_acomp_decompress() to keep
line lengths manageable.
No functional change intended.
Link: https://lkml.kernel.org/r/20260121013615.2906368-1-yosry.ahmed@linux.dev
Signed-off-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Acked-by: Nhat Pham <nphamcs@gmail.com>
Cc: Chengming Zhou <chengming.zhou@linux.dev>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Enhance output when running PAT firmware, which is helpful when
developing the QEMU emulator. The added code is behind an ifdef,
so no performance overhead for normal kernels.
Signed-off-by: Helge Deller <deller@gmx.de>
PDC PAT defines this optional function. Testing on my C8000 workstation
and a rp3440 server did not indicate that they provide such counter.
Nevertheless, add the function since we should try to use such a
counter if it's available. In Qemu it should be simple to add it.
Signed-off-by: Helge Deller <deller@gmx.de>
The hardware IDs are 32-bit unsigned integers, so print them as 4-digit
hex numbers. Additionally fix some whitespace glitches.
Signed-off-by: Helge Deller <deller@gmx.de>
If device_register() fails, put_device() is the correct way to
drop the device reference.
Found by code review.
Fixes: 1070c9655b ("[PA-RISC] Fix must_check warnings in drivers.c")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <lihaoxiang@isrc.iscas.ac.cn>
Signed-off-by: Helge Deller <deller@gmx.de>
The recent commit "hfsplus: ensure sb->s_fs_info is always cleaned up"
[1] introduced a custom ->kill_sb() handler (hfsplus_kill_super) that
cleans up the s_fs_info structure (including the NLS table) on
superblock destruction.
However, the error handling path in hfsplus_fill_super() still calls
unload_nls() before returning an error. Since the VFS layer calls
->kill_sb() when fill_super fails, this results in unload_nls() being
called twice for the same sbi->nls pointer: once in hfsplus_fill_super()
and again in hfsplus_kill_super() (via delayed_free).
Remove the explicit unload_nls() call from the error path in
hfsplus_fill_super() to rely solely on the cleanup in ->kill_sb().
[1] https://lore.kernel.org/r/20251201222843.82310-3-mehdi.benhadjkhelifa@gmail.com/
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lore.kernel.org/r/20260203043806.GF3183987@ZenIV/
Signed-off-by: Shardul Bankar <shardul.b@mpiricsoftware.com>
Link: https://lore.kernel.org/r/20260204170440.1337261-1-shardul.b@mpiricsoftware.com
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
- Relax Kconfig so tegra194 can be built for platforms beyond Tegra194
(Vidya Sagar)
* pci/controller/tegra194:
PCI: dwc: tegra194: Broaden architecture dependency
- Export irq_domain_free_irqs() to allow PCI/MSI drivers that tear down
MSI domains to be built as modules (Aaron Kling)
- Export tegra_cpuidle_pcie_irqs_in_use(), which disables Tegra CC6 while
PCI IRQs are in use, so pci-tegra can be built as a module (Aaron Kling)
- Allow pci-tegra to be built as a module (Aaron Kling)
* pci/controller/tegra:
PCI: tegra: Allow building as a module
cpuidle: tegra: Export tegra_cpuidle_pcie_irqs_in_use()
irqdomain: Export irq_domain_free_irqs()
- Use pci_generic_config_write(), not custom wrapper, since we don't need
the writability provided by the wrapper (Claudiu Beznea)
- Drop lock around RZG3S_PCI_MSIRS and RZG3S_PCI_PINTRCVIS updates since
they are RW1C registers (Claudiu Beznea)
- Fix a device node reference leak in rzg3s_pcie_host_parse_port() (Felix
Gu)
* pci/controller/rzg3s-host:
PCI: rzg3s-host: Fix device node reference leak in rzg3s_pcie_host_parse_port()
PCI: rzg3s-host: Drop the lock on RZG3S_PCI_MSIRS and RZG3S_PCI_PINTRCVIS
PCI: rzg3s-host: Use pci_generic_config_write() for the root bus
- Use regulator APIs to control the 3v3 power supply of PCIe slots (Hal
Feng)
* pci/controller/plda-starfive:
PCI: starfive: Use regulator APIs to control the 3v3 power supply of PCIe slots
- Add DT binding and driver support for SA8255p Endpoint being managed by
firmware (Mrinmay Sarkar)
* pci/controller/dwc-qcom-ep:
PCI: qcom-ep: Add support for firmware-managed PCIe Endpoint
dt-bindings: PCI: qcom,sa8255p-pcie-ep: Document firmware managed PCIe endpoint
- Parse PERST# from all PCIe bridge nodes for future platforms that will
have PERST# in Switch Downstream Ports as well as in Root Ports
(Manivannan Sadhasivam)
- Rename qcom PERST# assert/deassert helpers, e.g., qcom_ep_reset_assert(),
to avoid confusion with Endpoint interfaces (Manivannan Sadhasivam)
* pci/controller/dwc-qcom:
PCI: qcom: Rename PERST# assert/deassert helpers for uniformity
PCI: qcom: Parse PERST# from all PCIe bridge nodes
# Conflicts:
# drivers/pci/controller/dwc/pcie-qcom.c
- Add DT binding and driver support for an optional external refclock in
addition to the refclock from the internal PLL (Richard Zhu)
- Apply i.MX95 ERR051586 erratum workaround (release CLKREQ# so endpoint
can assert it when required) during resume (Richard Zhu)
- Enable i.MX95 REFCLK by overriding CLKREQ# so it's driven by default
(Richard Zhu)
- Clear CLKREQ# override if link is up and DT says 'supports-clkreq' so
endpoints can use CLKREQ# to exit the L1.2 state (Richard Zhu)
* pci/controller/dwc-imx6:
PCI: imx6: Clear CLKREQ# override if 'supports-clkreq' DT property is available
PCI: imx6: Add CLKREQ# override to enable REFCLK for i.MX95 PCIe
PCI: dwc: Invoke post_init in dw_pcie_resume_noirq()
PCI: imx6: Add external reference clock input mode support
dt-bindings: PCI: pci-imx6: Add external reference clock input
dt-bindings: PCI: dwc: Add external reference clock input
- Extend PCI_FIND_NEXT_CAP() and PCI_FIND_NEXT_EXT_CAP() to return a
pointer to the preceding Capability (Qiang Yu)
- Add dw_pcie_remove_capability() and dw_pcie_remove_ext_capability() to
remove Capabilities that are advertised but not fully implemented (Qiang
Yu)
- Remove MSI and MSI-X Capabilities for DWC controllers in platforms that
can't support them, so we automatically fall back to INTx (Qiang Yu)
- Remove MSI-X and DPC Capabilities for Qualcomm platforms that advertise
but don't support them (Qiang Yu)
- Remove duplicate dw_pcie_ep_hide_ext_capability() function and replace
with dw_pcie_remove_ext_capability() (Qiang Yu)
- Add ASPM L1.1 and L1.2 Substates context to debugfs ltssm_status for
drivers that support this (Shawn Lin)
- Skip PME_Turn_Off broadcast and L2/L3 transition during suspend if link
is not up to avoid an unnecessary timeout (Manivannan Sadhasivam)
- Revert dw-rockchip, qcom, and DWC core changes that used link-up IRQs to
trigger enumeration instead of waiting for link to be up because the PCI
core doesn't allocate bus number space for hierarchies that might be
attached (Niklas Cassel)
- Make endpoint iATU entry for MSI permanent instead of programming it
dynamically, which is slow and racy with respect to other concurrent
traffic, e.g., eDMA (Koichiro Den)
- Use iMSI-RX MSI target address when possible to fix endpoints using
32-bit MSI (Shawn Lin)
- Make dw_pcie_ltssm_status_string() available and use it for logging
errors in dw_pcie_wait_for_link() (Manivannan Sadhasivam)
- Return -ENODEV when dw_pcie_wait_for_link() finds no devices, -EIO for
device present but inactive, -ETIMEDOUT for other failures, so callers
can handle these cases differently (Manivannan Sadhasivam)
- Allow DWC host controller driver probe to continue if device is not found
or found but inactive; only fail when there's an error with the link
(Manivannan Sadhasivam)
- For controllers like NXP i.MX6QP and i.MX7D, where LTSSM registers are
not accessible after PME_Turn_Off, simply wait 10ms instead of polling
for L2/L3 Ready (Richard Zhu)
- Use multiple iATU entries to map large bridge windows and DMA ranges when
necessary instead of failing (Samuel Holland)
- Rename struct dw_pcie_rp.has_msi_ctrl to .use_imsi_rx for clarity (Qiang
Yu)
- Add EPC dynamic_inbound_mapping feature bit for Endpoint Controllers that
can update BAR inbound address translation without requiring EPF driver
to clear/reset the BAR first, and advertise it for DWC-based Endpoints
(Koichiro Den)
- Add EPC subrange_mapping feature bit for Endpoint Controllers that can
map multiple independent inbound regions in a single BAR, implement
subrange mapping, advertise it for DWC-based Endpoints, and add Endpoint
selftests for it (Koichiro Den)
- Allow overriding default BAR sizes for pci-epf-test (Niklas Cassel)
- Make resizable BARs work for Endpoint multi-PF configurations; previously
it only worked for PF 0 (Aksh Garg)
- Fix Endpoint non-PF 0 support for BAR configuration, ATU mappings, and
Address Match Mode (Aksh Garg)
- Fix issues with outbound iATU index assignment that caused iATU index to
be out of bounds (Niklas Cassel)
- Clean up iATU index tracking to be consistent (Niklas Cassel)
- Set up iATU when ECAM is enabled; previously IO and MEM outbound windows
weren't programmed, and ECAM-related iATU entries weren't restored after
suspend/resume, so config accesses failed (Krishna Chaitanya Chundru)
* pci/controller/dwc:
PCI: dwc: Fix missing iATU setup when ECAM is enabled
PCI: dwc: Clean up iATU index usage in dw_pcie_iatu_setup()
PCI: dwc: Fix msg_atu_index assignment
PCI: dwc: ep: Add comment explaining controller level PTM access in multi PF setup
PCI: dwc: ep: Add per-PF BAR and inbound ATU mapping support
PCI: dwc: ep: Fix resizable BAR support for multi-PF configurations
PCI: endpoint: pci-epf-test: Allow overriding default BAR sizes
selftests: pci_endpoint: Add BAR subrange mapping test case
misc: pci_endpoint_test: Add BAR subrange mapping test case
PCI: endpoint: pci-epf-test: Add BAR subrange mapping test support
Documentation: PCI: endpoint: Clarify pci_epc_set_bar() usage
PCI: dwc: ep: Support BAR subrange inbound mapping via Address Match Mode iATU
PCI: dwc: Advertise dynamic inbound mapping support
PCI: endpoint: Add BAR subrange mapping support
PCI: endpoint: Add dynamic_inbound_mapping EPC feature
PCI: dwc: Rename dw_pcie_rp::has_msi_ctrl to dw_pcie_rp::use_imsi_rx for clarity
PCI: dwc: Fix grammar and formatting for comment in dw_pcie_remove_ext_capability()
PCI: dwc: Use multiple iATU windows for mapping large bridge windows and DMA ranges
PCI: dwc: Remove duplicate dw_pcie_ep_hide_ext_capability() function
PCI: dwc: Skip waiting for L2/L3 Ready if dw_pcie_rp::skip_l23_wait is true
PCI: dwc: Fail dw_pcie_host_init() if dw_pcie_wait_for_link() returns -ETIMEDOUT
PCI: dwc: Rework the error print of dw_pcie_wait_for_link()
PCI: dwc: Rename and move ltssm_status_string() to pcie-designware.c
PCI: dwc: Return -EIO from dw_pcie_wait_for_link() if device is not active
PCI: dwc: Return -ENODEV from dw_pcie_wait_for_link() if device is not found
PCI: dwc: Use cfg0_base as iMSI-RX target address to support 32-bit MSI devices
PCI: dwc: ep: Cache MSI outbound iATU mapping
Revert "PCI: dwc: Don't wait for link up if driver can detect Link Up event"
Revert "PCI: qcom: Enumerate endpoints based on Link up event in 'global_irq' interrupt"
Revert "PCI: qcom: Enable MSI interrupts together with Link up if 'Global IRQ' is supported"
Revert "PCI: qcom: Don't wait for link if we can detect Link Up"
Revert "PCI: dw-rockchip: Enumerate endpoints based on dll_link_up IRQ"
Revert "PCI: dw-rockchip: Don't wait for link since we can detect Link Up"
PCI: dwc: Skip PME_Turn_Off broadcast and L2/L3 transition during suspend if link is not up
PCI: dw-rockchip: Change get_ltssm() to provide L1 Substates info
PCI: dwc: Add L1 Substates context to ltssm_status of debugfs
PCI: qcom: Remove DPC Extended Capability
PCI: qcom: Remove MSI-X Capability for Root Ports
PCI: dwc: Remove MSI/MSIX capability for Root Port if iMSI-RX is used as MSI controller
PCI: dwc: Add new APIs to remove standard and extended Capability
PCI: Add preceding capability position support in PCI_FIND_NEXT_*_CAP macros
- Add config guards to fix build error when sg2042 is a module but j721e is
built-in (Siddharth Vadapalli)
* pci/controller/cadence-j721e:
PCI: j721e: Add config guards for Cadence Host and Endpoint library APIs
- Fix cdns_pcie_host_dma_ranges_cmp() to prevent possible invalid sort
order (Ian Rogers)
* pci/controller/cadence:
PCI: cadence: Avoid signed 64-bit truncation and invalid sort
- Add WQ_PERCPU to alloc_workqueue() users (Marco Crivellari)
- Replace use of system_wq with system_percpu_wq (Marco Crivellari)
- Check for failure of alloc_workqueue() to avoid NULL pointer dereferences
(Haotian Zhang)
* pci/workqueue:
PCI: endpoint: Add missing NULL check for alloc_workqueue()
PCI: endpoint: Replace use of system_wq with system_percpu_wq
PCI: Add WQ_PERCPU to alloc_workqueue() users
# Conflicts:
# drivers/pci/endpoint/pci-ep-cfs.c
- Mark ASM1164 SATA controller to avoid bus reset since it fails to train
the Link after reset (Alex Williamson)
- Mark Nvidia GB10 Root Ports to avoid bus reset since they may fail to
retrain the link after reset (Johnny-CC Chang)
- Add lockdep and other lock assertions (Ilpo Järvinen)
- Add ACS quirk for Qualcomm Hamoa & Glymur, which provides ACS-like
features but doesn't advertise an ACS Capability (Krishna Chaitanya
Chundru)
- Add ACS quirk for Pericom PI7C9X2G404 switches, which fail under load
when P2P Redirect Request is enabled (Nicolas Cavallari)
- Remove an incorrect unlock in pci_slot_trylock() error handling (Jinhui
Guo)
- Lock the bridge device for slot reset (Keith Busch)
- Enable ACS after IOMMU configuration on OF platforms so ACS is enabled an
all devices; previously the first device enumeration (typically a Root
Port) was omitted (Manivannan Sadhasivam)
- Disable ACS Source Validation for IDT 0x80b5 and 0x8090 switches to work
around hardware erratum; previously ACS SV was temporarily disabled,
which worked for enumeration but not after reset (Manivannan Sadhasivam)
* pci/virtualization:
PCI: Disable ACS SV for IDT 0x8090 switch
PCI: Disable ACS SV for IDT 0x80b5 switch
PCI: Cache ACS Capabilities register
PCI: Enable ACS after configuring IOMMU for OF platforms
PCI: Add ACS quirk for Pericom PI7C9X2G404 switches [12d8:b404]
PCI: Add ACS quirk for Qualcomm Hamoa & Glymur
PCI: Use device_lock_assert() to verify device lock is held
PCI: Use lockdep_assert_held(pci_bus_sem) to verify lock is held
PCI: Fix pci_slot_lock () device locking
PCI: Fix pci_slot_trylock() error handling
PCI: Mark Nvidia GB10 to avoid bus reset
PCI: Mark ASM1164 SATA controller to avoid bus reset
- Build zero-sized resources when a BAR is larger than 4G but
pci_bus_addr_t or resource_size_t can't represent 64-bit addresses (Ilpo
Järvinen)
- Fix bridge window alignment with optional resources, where we previously
lost the additional alignment requirement (Ilpo Järvinen)
- Stop over-estimating bridge window size since we now assign them without
any gaps between them (Ilpo Järvinen)
- Increase resource MAX_IORES_LEVEL to avoid /proc/iomem flattening for
nested bridges and endpoints (Ilpo Järvinen)
- Remove old_size limit from bridge window sizing (Ilpo Järvinen)
- Push realloc check into pbus_size_mem() to simplify callers (Ilpo
Järvinen)
- Pass bridge window resource to pbus_size_mem() to avoid looking it up
again (Ilpo Järvinen)
- Use res_to_dev_res() instead of open-coding the same search (Ilpo
Järvinen)
- Add pci_resource_is_bridge_win() helper (Ilpo Järvinen)
- Add more logging of resource assignment (Ilpo Järvinen)
- Add pbus_mem_size_optional() to handle sizes of optional resources
(SR-IOV VF BARs, expansion ROMs, bridge windows) (Ilpo Järvinen)
- Move CardBus code to setup-cardbus.c and only build it when
CONFIG_CARDBUS is set (Ilpo Järvinen)
- Use scnprintf() instead of sprintf() (Ilpo Järvinen)
- Add pbus_validate_busn() for Bus Number validation (Ilpo Järvinen)
- Don't claim disabled bridge windows to avoid spurious claim failures
(Ilpo Järvinen)
* pci/resource:
PCI: Don't claim disabled bridge windows
PCI: Move CardBus bridge scanning to setup-cardbus.c
PCI: Add pbus_validate_busn() for Bus Number validation
PCI: Add dword #defines for Bus Number + Secondary Latency Timer
PCI: Use scnprintf() instead of sprintf()
PCI: Handle CardBus-specific params in setup-cardbus.c
PCI: Separate CardBus setup & build it only with CONFIG_CARDBUS
PCI: Add 'pci' prefix to struct pci_dev_resource handling functions
PCI: Use resource_assigned() in setup-bus.c algorithm
resource: Mark res given to resource_assigned() as const
PCI: Add pbus_mem_size_optional() to handle optional sizes
PCI: Check invalid align earlier in pbus_size_mem()
PCI: Log reset and restore of resources
PCI: Add pci_resource_is_bridge_win()
PCI: Fetch dev_res to local var in __assign_resources_sorted()
PCI: Use res_to_dev_res() in reassign_resources_sorted()
PCI: Pass bridge window resource to pbus_size_mem()
PCI: Push realloc check into pbus_size_mem()
PCI: Remove old_size limit from bridge window sizing
resource: Increase MAX_IORES_LEVEL to 8
PCI: Stop over-estimating bridge window size
PCI: Rewrite bridge window head alignment function
PCI: Fix bridge window alignment with optional resources
PCI: Use resource_set_range() that correctly sets ->end
- Rename pwrseq, tc9563, and slot driver structs, variables, and functions
for consistency (Bjorn Helgaas)
- Add power_on/off callbacks with generic signature to pwrseq, tc9563, and
slot drivers so they can be used by pwrctrl core (Manivannan Sadhasivam)
- Add interfaces to create and destroy pwrctrl devices (Krishna Chaitanya
Chundru)
- Add interfaces to power devices on and off (Manivannan Sadhasivam)
- Switch to pwrctrl interfaces to create, destroy, and power on/off
devices, calling them from host controller drivers instead of the PCI
core (Manivannan Sadhasivam)
- Drop qcom .assert_perst() callbacks since this is now done by the
controller driver instead of the pwrctrl driver (Manivannan Sadhasivam)
- Add PCIe M.2 connector support to the slot pwrctrl driver (Manivannan
Sadhasivam)
- Create pwrctrl devices for devicetree PCIe M.2 connector nodes
(Manivannan Sadhasivam)
* pci/pwrctrl:
PCI/pwrctrl: Create pwrctrl device if graph port is found
PCI/pwrctrl: Add PCIe M.2 connector support
PCI: Drop the assert_perst() callback
PCI: qcom: Drop the assert_perst() callbacks
PCI/pwrctrl: Switch to pwrctrl create, power on/off, destroy APIs
PCI/pwrctrl: Add APIs to power on/off pwrctrl devices
PCI/pwrctrl: Add APIs to create, destroy pwrctrl devices
PCI/pwrctrl: Add 'struct pci_pwrctrl::power_{on/off}' callbacks
PCI/pwrctrl: pwrseq: Factor out power on/off code to helpers
PCI/pwrctrl: slot: Factor out power on/off code to helpers
PCI/pwrctrl: tc9563: Rename private struct and pointers for consistency
PCI/pwrctrl: tc9563: Add local variables to reduce repetition
PCI/pwrctrl: tc9563: Clean up whitespace
PCI/pwrctrl: tc9563: Use put_device() instead of i2c_put_adapter()
PCI/pwrctrl: slot: Rename private struct and pointers for consistency
PCI/pwrctrl: pwrseq: Rename private struct and pointers for consistency
# Conflicts:
# drivers/pci/bus.c
- Drop device reference unconditionally in pcie_port_remove_service() to
fix resource leak (Uwe Kleine-König)
- Remove empty pcie_port_shutdown_service() callback (Uwe Kleine-König)
- Remove unnecessary bus_type check in pcie_port_bus_match() (Uwe
Kleine-König)
- Move pcie_port_bus_match() and pcie_port_bus_type to PCIe-specific
portdrv.c (Uwe Kleine-König)
- Remove unnecessary dev and dev->driver checks in portdrv .probe() and
.remove() (Uwe Kleine-König)
- Take advantage of pcie_port_bus_type.probe() and .remove() instead of
assigning them for each portdrv service driver (Uwe Kleine-König)
* pci/portdrv:
PCI/portdrv: Use bus-type functions
PCI/portdrv: Don't check for valid device and driver in bus callbacks
PCI/portdrv: Move pcie_port_bus_type to pcie source file
PCI/portdrv: Don't check for the driver's and device's bus
PCI/portdrv: Drop empty shutdown callback
PCI/portdrv: Fix potential resource leak
- Avoid redundant delay on transition from D3hot to D3cold if the device
was already in D3hot (Brian Norris)
- Prevent runtime suspend until devices are fully initialized to avoid
saving incompletely configured device state (Brian Norris)
* pci/pm:
PCI/PM: Prevent runtime suspend until devices are fully initialized
PCI/PM: Avoid redundant delays on D3hot->D3cold
- Add PCI_BRIDGE_NO_ALIAS quirk for ASPEED AST1150, where VGA and USB are
behind a PCIe-to-PCI bridge and share the same StreamID (Nirmoy Das)
* pci/iommu:
PCI: Add PCI_BRIDGE_NO_ALIAS quirk for ASPEED AST1150
PCI: Add ASPEED vendor ID to pci_ids.h
