Add __stderr and __stdout to validate the output of BPF streams for bpf
selftests. Similar to __xlated, __jited, etc., __stderr/out can be used
in the BPF progs to compare a string (regex supported) to the output in
the bpf streams.
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250911145808.58042-5-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Begin reporting arena page faults and the faulting address to BPF
program's stderr, this patch adds support in the arm64 and x86-64 JITs,
support for other archs can be added later.
The fault handlers receive the 32 bit address in the arena region so
the upper 32 bits of user_vm_start is added to it before printing the
address. This is what the user would expect to see as this is what is
printed by bpf_printk() is you pass it an address returned by
bpf_arena_alloc_pages();
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20250911145808.58042-4-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
BPF streams are only valid for the main programs, to make it easier to
access streams from subprogs, introduce main_prog_aux in struct
bpf_prog_aux.
prog->aux->main_prog_aux = prog->aux, for main programs and
prog->aux->main_prog_aux = main_prog->aux, for subprograms.
Make bpf_prog_find_from_stack() use the added main_prog_aux to return
the mainprog when a subprog is found on the stack.
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250911145808.58042-3-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
BPF loads with BPF_PROBE_MEM(SX) can load from unsafe pointers and the
JIT adds an exception table entry for the JITed instruction which allows
the exeption handler to set the destination register of the load to zero
and continue execution from the next instruction.
As all arm64 instructions are AARCH64_INSN_SIZE size, the exception
handler can just increment the pc by AARCH64_INSN_SIZE without needing
the exact address of the instruction following the the faulting
instruction.
Simplify the exception table usage in arm64 JIT by only saving the
destination register in ex->fixup and drop everything related to
the fixup_offset. The fault handler is modified to add AARCH64_INSN_SIZE
to the pc.
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Xu Kuohai <xukuohai@huawei.com>
Link: https://lore.kernel.org/r/20250911145808.58042-2-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
arm32 KVM was removed in commit 541ad0150c ("arm: Remove 32bit KVM
host support").
None of the kvm selftests are compiled for arm32 and it's not indirectly
included from anywhere either, so delete it.
Reviewed-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250910-james-tools-header-cleanup-v1-2-7ae4bedc99e0@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
These have been unused since commit 162607ea20 ("perf kvm/{x86,s390}:
Remove dependency on uapi/kvm_perf.h") in favour of dynamic discovery.
Remove the unused headers to reduce consistency checking overhead and
noise.
Signed-off-by: James Clark <james.clark@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250910-james-tools-header-cleanup-v1-1-7ae4bedc99e0@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently, xattr name prefixes are forcibly placed into the packed
inode if the fragments feature is enabled, and users have no option
to put them in plain form directly on disk.
This is inflexible. First, as mentioned above, users should be able
to store unwrapped long xattr name prefixes unconditionally
(COMPAT_PLAIN_XATTR_PFX). Second, since we now have the new metabox
inode to store metadata, it should be used when available instead
of the packed inode.
Fixes: 414091322c ("erofs: implement metadata compression")
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
The device support firmware logging feature. Use libie code to
initialize it and allow reading the logs using debugfs.
The commands are the same as in ice driver. Look at the description in
commit 96a9a9341c ("ice: configure FW logging") for more info.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Move whole code from ice_fwlog.c/h to libie/fwlog.c/h.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Wrap libie_fwlog_register() by libie_fwlog_reregister(), which checks
first if the registration is needed. This simplifies the code and makes
the former function static.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
s/ice/libie
There is no function for filling default descriptor in libie. Zero
descriptor structure and set opcode without calling the function.
Make functions that are caled only in ice_fwlog.c static.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
This code is only used in fwlog. Moved it there for easier lib creation.
There is a circular dependency between debugfs and fwlog. Moving to one
file is fixing it.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Copy the code and:
- change ICE_AQC to LIBIE_AQC
- change ice_aqc to libie_aqc
- move definitions outside the structures
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
In debugfs pass ice_fwlog structure instead of ice_pf.
The debgufs dirs specific for fwlog can be stored in fwlog structure.
Add debugfs entry point to fwlog api.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Fwlog can be supported only on PF 0. Check this before calling
init/deinit functions.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The root debugfs directory should be available from driver side, not
from library. Move it out from fwlog code.
Make similar to __fwlog_init() __fwlog_deinit() and deinit debugfs
there. In case of ice only fwlog is using debugfs.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Fwlog code needs to communicate with FW. In ice it is done through admin
queue command. Allow indirect calling the send function to move the
specific admin queue send function from fwlog core code.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Prepare the code to be moved to the library. ice_debug() won't be there
so switch to dev_dbg().
Add struct pdev pointer in fwlog to track on which pdev the fwlog was
created.
Switch the dev passed in dev_warn() to the one stored in fwlog.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The new structure is needed to make the fwlog code a library. A goal is
to drop ice_hw structure in all fwlog related functions calls.
Pass a ice_fwlog pointer across fwlog functions and use it wherever it
is possible.
Still use &hw->fwlog in debugfs code as it needs changing the value
being passed in priv. It will be done in one of the next patches.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Any other access to fwlog_cfg isn't done through a function. Follow
scheme that is used to access other fwlog_cfg elements from debugfs and
write to the log_level directly.
ice_pf_fwlog_update_module() is called only twice (from one function).
Remove it.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Change the function prototype to receive hw structure instead of pf to
simplify the call. Instead of passing whole event pass only msg_buf
pointer and length.
Make ice_fwlog_ring_full() static as it isn't called from any other
context.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
ice_fwlog_supported(), ice_fwlog_get() and ice_fwlog_supported() aren't
called outside the ice_fwlog.c file. Make it static and move in the file
to allow clean build.
Drop ice_fwlog_get(). It is called only from ice_fwlog_init() function
where the fwlog support is already checked. There is no need to check it
again, call ice_aq_fwlog_get() instead.
Drop no longer valid comment from ice_fwlog_get_supported().
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
All of the x86 KVM guest types (VMX, SEV and TDX) do some special context
tracking when entering guests. This means that the actual guest entry
sequence must be noinstr.
Part of entering a TDX guest is passing a physical address to the TDX
module. Right now, that physical address is stored as a 'struct page'
and converted to a physical address at guest entry. That page=>phys
conversion can be complicated, can vary greatly based on kernel
config, and it is definitely _not_ a noinstr path today.
There have been a number of tinkering approaches to try and fix this
up, but they all fall down due to some part of the page=>phys
conversion infrastructure not being noinstr friendly.
Precalculate the page=>phys conversion and store it in the existing
'tdx_vp' structure. Use the new field at every site that needs a
tdvpr physical address. Remove the now redundant tdx_tdvpr_pa().
Remove the __flatten remnant from the tinkering.
Note that only one user of the new field is actually noinstr. All
others can use page_to_phys(). But, they might as well save the effort
since there is a pre-calculated value sitting there for them.
[ dhansen: rewrite all the text ]
Signed-off-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Kiryl Shutsemau <kas@kernel.org>
Tested-by: Farrah Chen <farrah.chen@intel.com>
The unpublished smatch static checker reported a warning.
drivers/accel/amdxdna/aie2_pci.c:904 aie2_query_ctx_status_array()
warn: potential user controlled sizeof overflow
'args->num_element * args->element_size' '1-u32max(user) * 1-u32max(user)'
Even this will not cause a real issue, it is better to put a reasonable
limitation for element_size and num_element. Add condition to make sure
the input element_size <= 4K and num_element <= 1K.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/dri-devel/aL56ZCLyl3tLQM1e@stanley.mountain/
Fixes: 2f509fe6a4 ("accel/amdxdna: Add ioctl DRM_IOCTL_AMDXDNA_GET_ARRAY")
Reviewed-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://lore.kernel.org/r/20250909154531.3469979-1-lizhi.hou@amd.com
If GuC hangs, the GuC logs might not contain enough information to
understand exactly why the hang occurred. In this case, we need to
look at the GuC HW state to try to understand where the GuC is stuck. It
is therefore useful to include the GuC HW state in the error capture.
The list of registers that are part of the GuC HW state can change based
on platform, but it is the same for all platforms from TGL to MTL so we
only need to support one version for i915.
v2: revised list
v3: remove confusing comment, use sizeof(u32) instead of 4 (John)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://lore.kernel.org/r/20250909223621.3782625-2-daniele.ceraolospurio@intel.com
The A523's RTC block is backward compatible with the R329's, but it also
has a calibration function for its internal oscillator, which would
allow it to provide a clock rate closer to the desired 32.768 KHz. This
is useful on the Radxa Cubie A5E, which does not have an external 32.768
KHz crystal.
Add new compatible-specific data for it.
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250909170947.2221611-1-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Document the compatible values for the Renesas R-Car X5H (R8A78000) SoC,
as used on the Renesas Ironhide board.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/87ms73vzen.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Fence instructions are required only at the beginning and the end of
a flush operation, not separately for each cache line being flushed.
Speed up cache flushes by about 15% by removing the extra fences.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Use dev_err_probe() helper as recommended by core driver model in
drivers/base/core.c to handle deferred probe error. Improve code
consistency and debuggability using standard helper.
Signed-off-by: Akhilesh Patil <akhilesh@ee.iitb.ac.in>
Tested-by: Mikko Perttunen <mperttunen@nvidia.com>
Acked-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/aKgKrCxUvP9Sw0YI@bhairav-test.ee.iitb.ac.in
Add support to register host1x devices without requiring subdevices.
This ensures syncpoint functionality remains available even when engine
subdevices are not present.
Add softdep for tegra-drm to make userspace interface available
without module autoloading through device tree entries.
Signed-off-by: Vamsee Vardhan Thummala <vthummala@nvidia.com>
[mperttunen@nvidia.com: some rewording]
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20250708-host1x-allow-no-subdevs-v1-1-93c66c251f03@nvidia.com
The current submission opcode sequence first takes the engine MLOCK,
and then switches to HOST1X class to wait prefences. This is fine
while we only use a single channel per engine and there is no
virtualization, since jobs are serialized on that one channel anyway.
However, when that assumption doesn't hold, we are keeping the
engine locked while not running anything on it while waiting for
prefences to complete.
To resolve this, execute wait commands in the beginning of the job
outside the engine MLOCK. We still take the HOST1X MLOCK because
recent hardware requires register opcodes to be executed within some
MLOCK, but the hardware also allows unlimited channels to take the
HOST1X MLOCK at the same time.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20250708-host1x-wait-prefences-outside-mlock-v1-1-13e98044e35a@nvidia.com
Fix race condition between host1x_syncpt_alloc()
and host1x_syncpt_put() by using kref_put_mutex()
instead of kref_put() + manual mutex locking.
This ensures no thread can acquire the
syncpt_mutex after the refcount drops to zero
but before syncpt_release acquires it.
This prevents races where syncpoints could
be allocated while still being cleaned up
from a previous release.
Remove explicit mutex locking in syncpt_release
as kref_put_mutex() handles this atomically.
Signed-off-by: Mainak Sen <msen@nvidia.com>
Fixes: f5ba33fb96 ("gpu: host1x: Reserve VBLANK syncpoints at initialization")
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20250707-host1x-syncpt-race-fix-v1-1-28b0776e70bc@nvidia.com
The variable j is set, however never used in or outside the loop, thus
resulting in dead code.
Building with GCC 16 results in a build error due to
-Werror=unused-but-set-variable= enabled by default.
This patch clean up the dead code and fixes the build error.
Example build log:
drivers/gpu/drm/tegra/sor.c:1867:19: error: variable ‘j’ set but not used [-Werror=unused-but-set-variable=]
1867 | size_t i, j;
| ^
Signed-off-by: Brahmajit Das <listout@listout.xyz>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20250901212020.3757519-1-listout@listout.xyz
Add a version check function for checking ADI AXI IP core versions.
These cores use a semantic versioning scheme, so it is useful to have
a version check function that can check the minor version to enable
features in driver while maintaining backward compatibility.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20250815-spi-axi-spi-enigne-improve-version-checks-v1-1-13bde357d5b6@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
All recent platforms (including all the ones officially supported by the
Xe driver) do not allow concurrent execution of RCS and CCS workloads
from different address spaces, with the HW blocking the context switch
when it detects such a scenario.
The DUAL_QUEUE flag helps with this, by causing the GuC to not submit a
context it knows will not be able to execute. This, however, causes a new
problem: if RCS and CCS queues have pending workloads from different
address spaces, the GuC needs to choose from which of the 2 queues to
pick the next workload to execute. By default, the GuC prioritizes RCS
submissions over CCS ones, which can lead to CCS workloads being
significantly (or completely) starved of execution time.
The driver can tune this by setting a dedicated scheduling policy KLV;
this KLV allows the driver to specify a quantum (in ms) and a ratio
(percentage value between 0 and 100), and the GuC will prioritize the CCS
for that percentage of each quantum.
Given that we want to guarantee enough RCS throughput to avoid missing
frames, we set the yield policy to 20% of each 80ms interval.
v2: updated quantum and ratio, improved comment, use xe_guc_submit_disable
in gt_sanitize
Fixes: d9a1ae0d17 ("drm/xe/guc: Enable WA_DUAL_QUEUE for newer platforms")
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Tested-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Link: https://lore.kernel.org/r/20250905235632.3333247-2-daniele.ceraolospurio@intel.com
Factor out common part from ASUS Eee Pad Transformer TF101 device tree
into tegra20-asus-transformer-common.dtsi and add device tree fragment for
ASUS Eee Pad Slider SL101.
Tested-by: Winona Schroeer-Smith <wolfizen@wolfizen.net> # ASUS SL101
Tested-by: Antoni Aloy Torrens <aaloytorrens@gmail.com> # ASUS TF101
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Correct audio-codec interrupt should be PX3 while PX1 is used for external
microphone detection.
Tested-by: Winona Schroeer-Smith <wolfizen@wolfizen.net> # ASUS SL101
Tested-by: Antoni Aloy Torrens <aaloytorrens@gmail.com> # ASUS TF101
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add DFLL clock node to common Tegra114 device tree along with clocks
property to cpu node.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Existing touchscreen clipping is too small and causes problems with
touchscreen accuracy.
Signed-off-by: Jonas Schwöbel <jonasschwoebel@yahoo.de>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The DVCO present in the DFLL IP block has a separate reset line, exposed
via the CAR IP block. This reset line is asserted upon SoC reset.
Unless something (such as the DFLL driver) deasserts this line, the DVCO
will not oscillate, although reads and writes to the DFLL IP block will
complete.
Based on a3c83ff2 ("clk: tegra: Add DFLL DVCO reset control for Tegra124")
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
