Like many Kconfig symbols, SCHED_{SMT,CLUSTER,MC} are duplicated
across arch/*/Kconfig. Try and clean up a little.
Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Tested-by: Shrikanth Hegde <sshegde@linux.ibm.com> # powerpc
Link: https://lkml.kernel.org/r/20250826094358.GG3245006@noisy.programming.kicks-ass.net
Since all these functions are address-taken in SDTL_INIT() and called
indirectly, it doesn't really make sense for them to be inline.
Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Leon [1] and Vinicius [2] noted a topology_span_sane() warning during
their testing starting from v6.16-rc1. Debug that followed pointed to
the tl->mask() for the NODE domain being incorrectly resolved to that of
the highest NUMA domain.
tl->mask() for NODE is set to the sd_numa_mask() which depends on the
global "sched_domains_curr_level" hack. "sched_domains_curr_level" is
set to the "tl->numa_level" during tl traversal in build_sched_domains()
calling sd_init() but was not reset before topology_span_sane().
Since "tl->numa_level" still reflected the old value from
build_sched_domains(), topology_span_sane() for the NODE domain trips
when the span of the last NUMA domain overlaps.
Instead of replicating the "sched_domains_curr_level" hack, get rid of
it entirely and instead, pass the entire "sched_domain_topology_level"
object to tl->cpumask() function to prevent such mishap in the future.
sd_numa_mask() now directly references "tl->numa_level" instead of
relying on the global "sched_domains_curr_level" hack to index into
sched_domains_numa_masks[].
The original warning was reproducible on the following NUMA topology
reported by Leon:
$ sudo numactl -H
available: 5 nodes (0-4)
node 0 cpus: 0 1
node 0 size: 2927 MB
node 0 free: 1603 MB
node 1 cpus: 2 3
node 1 size: 3023 MB
node 1 free: 3008 MB
node 2 cpus: 4 5
node 2 size: 3023 MB
node 2 free: 3007 MB
node 3 cpus: 6 7
node 3 size: 3023 MB
node 3 free: 3002 MB
node 4 cpus: 8 9
node 4 size: 3022 MB
node 4 free: 2718 MB
node distances:
node 0 1 2 3 4
0: 10 39 38 37 36
1: 39 10 38 37 36
2: 38 38 10 37 36
3: 37 37 37 10 36
4: 36 36 36 36 10
The above topology can be mimicked using the following QEMU cmd that was
used to reproduce the warning and test the fix:
sudo qemu-system-x86_64 -enable-kvm -cpu host \
-m 20G -smp cpus=10,sockets=10 -machine q35 \
-object memory-backend-ram,size=4G,id=m0 \
-object memory-backend-ram,size=4G,id=m1 \
-object memory-backend-ram,size=4G,id=m2 \
-object memory-backend-ram,size=4G,id=m3 \
-object memory-backend-ram,size=4G,id=m4 \
-numa node,cpus=0-1,memdev=m0,nodeid=0 \
-numa node,cpus=2-3,memdev=m1,nodeid=1 \
-numa node,cpus=4-5,memdev=m2,nodeid=2 \
-numa node,cpus=6-7,memdev=m3,nodeid=3 \
-numa node,cpus=8-9,memdev=m4,nodeid=4 \
-numa dist,src=0,dst=1,val=39 \
-numa dist,src=0,dst=2,val=38 \
-numa dist,src=0,dst=3,val=37 \
-numa dist,src=0,dst=4,val=36 \
-numa dist,src=1,dst=0,val=39 \
-numa dist,src=1,dst=2,val=38 \
-numa dist,src=1,dst=3,val=37 \
-numa dist,src=1,dst=4,val=36 \
-numa dist,src=2,dst=0,val=38 \
-numa dist,src=2,dst=1,val=38 \
-numa dist,src=2,dst=3,val=37 \
-numa dist,src=2,dst=4,val=36 \
-numa dist,src=3,dst=0,val=37 \
-numa dist,src=3,dst=1,val=37 \
-numa dist,src=3,dst=2,val=37 \
-numa dist,src=3,dst=4,val=36 \
-numa dist,src=4,dst=0,val=36 \
-numa dist,src=4,dst=1,val=36 \
-numa dist,src=4,dst=2,val=36 \
-numa dist,src=4,dst=3,val=36 \
...
[ prateek: Moved common functions to include/linux/sched/topology.h,
reuse the common bits for s390 and ppc, commit message ]
Closes: https://lore.kernel.org/lkml/20250610110701.GA256154@unreal/ [1]
Fixes: ccf74128d6 ("sched/topology: Assert non-NUMA topology masks don't (partially) overlap") # ce29a7da84, f55dac1daf
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reported-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Reviewed-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Tested-by: Valentin Schneider <vschneid@redhat.com> # x86
Tested-by: Shrikanth Hegde <sshegde@linux.ibm.com> # powerpc
Link: https://lore.kernel.org/lkml/a3de98387abad28592e6ab591f3ff6107fe01dc1.1755893468.git.tim.c.chen@linux.intel.com/ [2]
When a CPU chooses to call push_dl_task and picks a task to push to
another CPU's runqueue then it will call find_lock_later_rq method
which would take a double lock on both CPUs' runqueues. If one of the
locks aren't readily available, it may lead to dropping the current
runqueue lock and reacquiring both the locks at once. During this window
it is possible that the task is already migrated and is running on some
other CPU. These cases are already handled. However, if the task is
migrated and has already been executed and another CPU is now trying to
wake it up (ttwu) such that it is queued again on the runqeue
(on_rq is 1) and also if the task was run by the same CPU, then the
current checks will pass even though the task was migrated out and is no
longer in the pushable tasks list.
Please go through the original rt change for more details on the issue.
To fix this, after the lock is obtained inside the find_lock_later_rq,
it ensures that the task is still at the head of pushable tasks list.
Also removed some checks that are no longer needed with the addition of
this new check.
However, the new check of pushable tasks list only applies when
find_lock_later_rq is called by push_dl_task. For the other caller i.e.
dl_task_offline_migration, existing checks are used.
Signed-off-by: Harshit Agarwal <harshit@nutanix.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Juri Lelli <juri.lelli@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250408045021.3283624-1-harshit@nutanix.com
The NVRAM selection logic in brcmf_fw_request_nvram_done() used
patterns like:
if ((data = bcm47xx_nvram_get_contents(&data_len)))
free_bcm47xx_nvram = true;
else if ((data = brcmf_fw_nvram_from_efi(&data_len)))
kfree_nvram = true;
This style violates kernel coding style guidelines and triggers
checkpatch.pl errors. It also slightly reduces readability.
Refactor these cases by separating the assignment and the check,
ensuring behavior remains identical while complying with coding
standards.
Signed-off-by: Darshan Rathod <darshanrathod475@gmail.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20250812123636.2142292-1-darshanrathod475@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Tracepoints that are defined take up around 5K each, even if they are not
used. If they are defined and not used, then they waste memory for unused
code. Soon unused tracepoints will cause warnings.
Remove the unused tracepoints of the cfg80211 subsystem. They are:
cfg80211_chandef_dfs_required
cfg80211_return_u32
cfg80211_return_uint
cfg80211_send_rx_auth
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://patch.msgid.link/20250828221759.131160ee@batman.local.home
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Device nodes are enabled by default, so remove confusing or duplicated
enabling of few nodes. No practical impact, verified with dtx_diff.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Marek Vasut <marek.vasut@mailbox.org>
Link: https://lore.kernel.org/r/20250818143730.244379-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Fix a long-standing issue with ath11k dropping group data packets
during GTK rekey, and fix an omission in the ath12k multi-link EMLSR
support introduced in v6.16.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ/mtSHzPUi16IfDEksFbugiYzLewUCaLeIKwAKCRAsFbugiYzL
e4fPAP9JDoYJG5G/2/8dEvyQyCYzqkhzaqwCxV4wfUA+igwUugD8C8El/qu2TOxY
/0ZPJ9AR86csDmEjQ38oG8elQzSOQQA=
=scAW
-----END PGP SIGNATURE-----
Merge tag 'ath-current-20250902' of git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath
Jeff Johnson says:
==================
ath.git update for v6.17-rc5
Fix a long-standing issue with ath11k dropping group data packets
during GTK rekey, and fix an omission in the ath12k multi-link EMLSR
support introduced in v6.16.
==================
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fix the following copy overflow warning identified by Smatch checker.
drivers/net/wireless/microchip/wilc1000/wlan_cfg.c:184 wilc_wlan_parse_response_frame()
error: '__memcpy()' 'cfg->s[i]->str' copy overflow (512 vs 65537)
This patch introduces size check before accessing the memory buffer.
The checks are base on the WID type of received data from the firmware.
For WID string configuration, the size limit is determined by individual
element size in 'struct wilc_cfg_str_vals' that is maintained in 'len' field
of 'struct wilc_cfg_str'.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/linux-wireless/aLFbr9Yu9j_TQTey@stanley.mountain
Suggested-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Link: https://patch.msgid.link/20250829225829.5423-1-ajay.kathat@microchip.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In order to further limit the number of references to the GPIO base
number stored in struct gpio_chip, replace the global GPIO numbers in
the output of debugfs callbacks by hardware offsets.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250826-gpio-dbg-show-base-v1-6-7f27cd7f2256@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
In order to further limit the number of references to the GPIO base
number stored in struct gpio_chip, replace the global GPIO numbers in
the output of debugfs callbacks by hardware offsets.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250826-gpio-dbg-show-base-v1-5-7f27cd7f2256@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
In order to further limit the number of references to the GPIO base
number stored in struct gpio_chip, replace the global GPIO numbers in
the output of debugfs callbacks by hardware offsets.
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250826-gpio-dbg-show-base-v1-4-7f27cd7f2256@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
In order to further limit the number of references to the GPIO base
number stored in struct gpio_chip, replace the global GPIO numbers in
the output of debugfs callbacks by hardware offsets.
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250826-gpio-dbg-show-base-v1-3-7f27cd7f2256@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
In order to further limit the number of references to the GPIO base
number stored in struct gpio_chip, replace the global GPIO numbers in
the output of debugfs callbacks by hardware offsets.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250826-gpio-dbg-show-base-v1-2-7f27cd7f2256@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
In order to further limit the number of references to the GPIO base
number stored in struct gpio_chip, replace the global GPIO numbers in
the output of debugfs callbacks by hardware offsets.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250826-gpio-dbg-show-base-v1-1-7f27cd7f2256@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The stm32-i2s binding inherits from the standard audio-graph-port
schema for its 'port' subnode, audio-graph-port requires the use
of the 'dai-format' property. The stm32mp151c-plyaqm dts file was
using the non-standard name 'format'.
Correct the property name to 'dai-format' to fix the dtbs_check
validation error.
Fixes: 9365fa46be ("ARM: dts: stm32: Add Plymovent AQM devicetree")
Signed-off-by: Jihed Chaibi <jihed.chaibi.dev@gmail.com>
Link: https://lore.kernel.org/r/20250830225115.303663-1-jihed.chaibi.dev@gmail.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
The "sdhci" compatible is not documented nor very useful on its own given
the various features and quirks of SDHCI implementations.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250829211318.1335862-1-robh@kernel.org
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
We accidentally deleted the wrong line of code when we did the
conversion to guard() locks. If the rme32->capture_substream has
already been set we should return -EBUSY.
Fixes: 8bb75ae244 ("ALSA: rme32: Use guard() for spin locks")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/aLfXmIQRFTXr5h8O@stanley.mountain
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Replace kmalloc() followed by copy_from_user() with memdup_user() to
improve and simplify set_context_image(), and to silence the following
Coccinelle/coccicheck warning reported by memdup_user.cocci:
WARNING opportunity for memdup_user
No functional changes intended.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://lore.kernel.org/r/20250902081046.35463-2-thorsten.blum@linux.dev
There is a possibility that intel_encoder_to_tc() function
returns negative i.e. TC_PORT_NONE (-1) value which may cause
tc_port_power_domain() function to overflow. To fix this,
let's add additional check that returns invalid power domain
i.e. POWER_DOMAIN_INVALID in case tc port equals TC_PORT_NONE.
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20250829101226.4085757-1-mika.kahola@intel.com
The ASpeed DTS files have various I2C devices with missing or incorrect
vendor prefixes in their compatible strings. This hasn't really mattered
and doesn't impact ABI compatibility as I2C devices get matched with their
vendor prefix stripped.
With this, the "maxim,max31790" nodes now validate and have some
warnings. Remove the spurious "#address-cells" and "#size-cells"
properties to fix the warnings.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
[arj: Fix conflicts with fe42f567c3 ("ARM: dts: aspeed: Minor whitespace cleanup")]
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Add more SVM GT stats which give visibility to where time is spent in
the SVM page fault handler. Stats include number of faults at a given
size, total SVM page fault time, migration time in us, copy time in us,
copy kb, get pages time in us, and bind time in us. Will help in tuning
SVM for performance.
v2:
- Include local changes
v3:
- Add tlb invalidation + valid page fault + per size copy size stats
v4:
- Ensure gt not NULL when incrementing SVM copy stats
- Normalize stats names
- Use magic macros to generate increment functions for ranges
v7:
- Use DEF_STAT_STR (Michal)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Francois Dugast <francois.dugast@intel.com>
Link: https://lore.kernel.org/r/20250829172232.1308004-3-matthew.brost@intel.com
It helpful to clear GT stats, run a test cases which is being profiled,
and look at the results of the stats from the individual test case. Make
stats entry writable and upon write clear the stats.
v5:
- Drop clear_stats debugfs entry (Lucas)
v6:
- Use xe_gt_stats_clear rather than helper (Michal)
- Rework loop in xe_gt_stats_clear (Michal)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://lore.kernel.org/r/20250829172232.1308004-2-matthew.brost@intel.com
Add support for the HSC MP5990 device on the Harma platform.
This change updates the device tree to include the MP5990 HSC
(Hot Swap Controller), allowing proper configuration and integration
with the platform.
Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com>
Link: https://patch.msgid.link/20250828074955.542711-4-peteryin.openbmc@gmail.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Update GPIO label definitions in the device tree to reflect the correct
power and control signal names. This includes:
- Rename "fcb0-activate" to "fcb1-activate" and "fcb2-activate"
- Add labels for:
- power-p3v3-standby
- power-p1v8-good
- power-pvdd33-s5
- power-pvdd18-s5
- power-asic-good
- power-12v-memory-good
- Replace unnamed GPIOs with appropriate labels such as:
- irq-pvddcore0-ocp-alert
- irq-pvddcore1-ocp-alert
Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com>
Link: https://patch.msgid.link/20250828074955.542711-3-peteryin.openbmc@gmail.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
