In commit 1352964774 ("spi: microchip-core-qspi: Support per spi-mem
operation frequency switches") the logic for checking the viability of
op->max_freq in mchp_coreqspi_setup_clock() was copied into
mchp_coreqspi_supports_op(). Unfortunately, op->max_freq is not valid
when this function is called during probe but is instead zero.
Accordingly, baud_rate_val is calculated to be INT_MAX due to division
by zero, causing probe of the attached memory device to fail.
Seemingly spi-microchip-core-qspi was the only driver that had such a
modification made to its supports_op callback when the per_op_freq
capability was added, so just remove it to restore prior functionality.
CC: stable@vger.kernel.org
Reported-by: Valentina Fernandez <valentina.fernandezalanis@microchip.com>
Fixes: 1352964774 ("spi: microchip-core-qspi: Support per spi-mem operation frequency switches")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Message-ID: <20250825-during-ploy-939bdd068593@spud>
Signed-off-by: Mark Brown <broonie@kernel.org>
Introduce a new internal structure for wrapping the sof_client_dev and
move members away from the client visible struct that they must not
access, let alone see (sdev and the list).
The changes are mechanical in nature and contained within sof-client core
code, no functional change or change in behavior is introduced.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Message-ID: <20250829102510.15159-3-peter.ujfalusi@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove the sof_client_dev_to_sof_dev() from the header file and add it as
a function in sof-client.c to avoid it's use by client drivers.
At the same time mark the sdev and list of sof_client_dev as restricted
fro core use only.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Message-ID: <20250829102510.15159-2-peter.ujfalusi@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add another debugfs file, "probe_points_available", that shows all the
available probe points in the SOF FW at the time of query. The probe
points are there only when an active SOF stream exists in the
system. However, the stream identifiers are persistent in the sense
that the same probe point identifiers always appear with the same
playback or capture command in the same system configuration.
The output, when reading "probe_points_available", may look like this:
0x1000005,0x0,0x100 host-copier.0.playback output buf idx 0 (connected)
0x7,0x0,0x100 gain.1.1 input buf idx 0 (connected)
0x1000007,0x0,0x0 gain.1.1 output buf idx 0
0x3,0x0,0x0 mixin.1.1 input buf idx 0
0x1000003,0x0,0x0 mixin.1.1 output buf idx 0
0x4,0x0,0x0 mixout.2.1 input buf idx 0
0x1000004,0x0,0x0 mixout.2.1 output buf idx 0
0x10007,0x0,0x0 gain.2.1 input buf idx 0
0x1010007,0x0,0x0 gain.2.1 output buf idx 0
0x11,0x0,0x0 smart_amp.2.1 input buf idx 0
0x1000011,0x0,0x0 smart_amp.2.1 output buf idx 0
0x10005,0x0,0x0 dai-copier.SSP.NoCodec-0.playback input buf idx 0
The triplet at the beginning of a line can be copy-pasted as such to
"probe_points" debugfs file for adding a probe point. The rest of the
line tries to give human readable explanation of what this probe point
is.
Signed-off-by: Jyri Sarha <jyri.sarha@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Message-ID: <20250829093022.32094-6-peter.ujfalusi@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The current output of three integers is not very human readable. Use
ipc4 functions to describe in more detail what the struct
sof_probe_point_desc buffer_id is actually referring to in an ipc4 SOF
system.
Before this commit the "probe_points" debugfs file could read as:
Id: 0x01000004 Purpose: 0 Node id: 0x100
Id: 0x00000006 Purpose: 0 Node id: 0x100
And after in the same situation in an ipc4 system it reads:
0x7,0x0,0x100 gain.1.1 input buf idx 0 (connected)
0x1000005,0x0,0x100 host-copier.0.playback output buf idx 0 (connected)
The triplet in the beginning of the line can be used to reinserted the
probe point again by writing it into "probe_points" debugfs file, if
its first removed by writing the fist number in "probe_points_remove".
The last number is ignored when creating a probe point.
Signed-off-by: Jyri Sarha <jyri.sarha@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Message-ID: <20250829093022.32094-5-peter.ujfalusi@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add sof_client_ipc4_find_swidget_by_id() for finding widgets from SOF
client devices. The motivation is to decode probes debugfs output to
be more readable.
Signed-off-by: Jyri Sarha <jyri.sarha@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Message-ID: <20250829093022.32094-4-peter.ujfalusi@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add SOF_IPC4_MOD_INSTANCE_GET() and SOF_IPC4_MOD_ID_GET() for getting
the ids from ipc4 header presentation.
Signed-off-by: Jyri Sarha <jyri.sarha@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Message-ID: <20250829093022.32094-3-peter.ujfalusi@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Upgrade the struct sof_probes_ipc_ops points_info() method from dummy
implementation to a working implementation. The actual functionality
requires that the DSP FW supports the IPC request. The support was
just recently added. If its not there an IPC failure is reported in
the logs.
Signed-off-by: Jyri Sarha <jyri.sarha@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Message-ID: <20250829093022.32094-2-peter.ujfalusi@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds support for FLOAT_LE ALSA type for playback and
capture for IPC4 systems. Functions sof_ipc4_update_hw_params(),
sof_ipc4_get_valid_bits() and sof_ipc4_get_sample_type()
are updated to handle SOF_IPC4_TYPE_FLOAT and
SNDRV_PCM_FORMAT_FLOAT_LE.
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Message-ID: <20250829105305.31818-4-peter.ujfalusi@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch enables use of 8-bit unsigned, A-law, and mu-law
sample formats with IPC4 SOF.
The ipc4-topology.h is updated with IPC4 sample types. The
purpose is to convert ALSA types to IPC4 types.
The functions of_ipc4_update_hw_params(), sof_ipc4_get_valid_bits(),
and new function sof_ipc4_get_sample_type() are updated to handle
the sample type conversions.
The function sof_ipc4_prepare_copier_module() is updated to set
the DMA SCS bit for all non 32 bits sample types.
The change to function sof_ipc4_get_valid_bits() returns 8 bits
for these ALSA formats.
The change to function sof_ipc4_prepare_copier_module() is
needed to handle properly all non 32-bit formats with SCS
bit set.
To support playback with new 8 bits types, the
sof_ipc4_init_input_audio_fmt() function is updated to get
the sample type and use it in search for copier input pin
format.
To support capture, the sof_ipc4_init_output_audio_fmt()
is updated similarly. Since the function uses separate
out_ref_type argument, instead of single parameters struct,
the out_ref_type needs to be added to every user of the
function. Therefore functions sof_ipc4_prepare_copier_module(),
sof_ipc4_prepare_gain_module(), sof_ipc4_prepare_mixer_module(),
sof_ipc4_prepare_src_module(), and sof_ipc4_prepare_process_module()
are updated to set the out_ref_type.
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Message-ID: <20250829105305.31818-3-peter.ujfalusi@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
We can have modules in path which can change the number of channels and in
this case the BE params needs to be adjusted to configure the DAI according
to the copier configuration.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Message-ID: <20250829105305.31818-2-peter.ujfalusi@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The -g parameter was meant to the test the immutable global hash instead of the
private hash which has been made immutable. The global hash is tested as part
at the end of the regular test. The immutable private hash been removed.
Remove last traces of the immutable private hash.
Fixes: 16adc7f136 ("selftests/futex: Remove support for IMMUTABLE")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Link: https://lore.kernel.org/20250827130011.677600-2-bigeasy@linutronix.de
When dealing with structures containing flexible arrays, struct_size()
provides additional compile-time checks compared to offsetof(). This
enhances code robustness and reduces the risk of potential errors.
Signed-off-by: Xichao Zhao <zhao.xichao@vivo.com>
Link: https://lore.kernel.org/20250829091510.597858-1-zhao.xichao@vivo.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
There is an extraneous space before a newline in a pr_info message.
Remove it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Use the auto-cleanup for the refcount management of seq_oss_synth
object. The explicit call of snd_use_lock_free() is dropped by the
magic __free(seq_oss_synth) attribute.
Along with that, replace the manual mutex and spin locks with
guard().
Only code refactoring, and no behavior change.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250827080520.7544-11-tiwai@suse.de
Use the auto-cleanup for the refcount management of seq_oss_midi
object. The explicit call of snd_use_lock_free() is dropped by the
magic __free(seq_oss_midi) attribute.
Along with that, replace the manual mutex and spin locks with
guard().
Only code refactoring, and no behavior change.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250827080520.7544-10-tiwai@suse.de
Yet more cleanup, now for seq_fifo.c about its refcount calls; the
manual refcount calls (either snd_use_lock_*() or snd_seq_fifo_lock())
are replaced with guard(snd_seq_fifo).
Only code refactoring, and no behavior change.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250827080520.7544-8-tiwai@suse.de
Yet more cleanup with the auto-cleanup macro: now we replace the
queuefree() calls with the magic pointer attribute
__free(snd_seq_queue).
Only code refactoring, and no behavior change.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250827080520.7544-7-tiwai@suse.de
Like the previous change in seq_clientmgr.c, introduce a new
auto-cleanup macro for the snd_seq_port_unlock(), and apply it
appropriately.
Only code refactoring, and no behavior change.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250827080520.7544-6-tiwai@suse.de
The current code manages the refcount of client in a way like:
snd_seq_client *client;
client = clientptr(id);
....
snd_seq_client_unlock(client);
Now we introduce an auto-cleanup macro to manage the unlock
implicitly, namely, the above will be replaced like:
snd_seq_client *client __free(snd_seq_client) = NULL;
client = clientptr(id);
and we can forget the unref call.
A part of the code in snd_seq_deliver_single_event() is factored out
to a function, so that the auto-cleanups can be applied cleanly.
This also allows us to replace some left mutex lock/unlock with
guard(), and also reduce scoped_guard() to the normal guard(), too.
Only code refactoring, and no behavior change.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250827080520.7544-5-tiwai@suse.de
There are a few manual calls of mutex and rwsem lock/unlock pairs in
seq_clientmngr.c, and those can be replaced nicely with guard().
Only code refactoring, and no behavior change.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250827080520.7544-4-tiwai@suse.de
Use guard() for spin locks to manage the sequencer client locking.
The code about the refcounting was modified with the new
snd_seq_client_ref() and *_unref() helpers instead of the ugly goto,
too.
Only code refactoring, and no behavior change.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250827080520.7544-3-tiwai@suse.de
snd_seq_client_ioctl_lock() and *_unlock() are used only from a single
function of the OSS layer, and it's just to wrap the call of
snd_seq_kernel_client_ctl().
Provide another variant of snd_seq_kernel_client_ctl() that takes the
locks internally and drop the ugly snd_seq_client_ioctl_lock() and
*_unlock() implementations, instead.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250827080520.7544-2-tiwai@suse.de
The release of temporary kmalloced buffers can be nicely handled via
the standard __free(kfree).
Only code refactoring, and no behavior change.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250827072916.31933-22-tiwai@suse.de
The release of temporary kmalloced buffers can be nicely handled via
the standard __free(kfree).
Only code refactoring, and no behavior change.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250827072916.31933-21-tiwai@suse.de
The release of temporary kmalloced buffers can be nicely handled via
the standard __free(kfree).
Only code refactoring, and no behavior change.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250827072916.31933-20-tiwai@suse.de
Replace the manual mutex lock/unlock pairs with guard().
Also, introduce the guard() for coef_mutex_lock() and _unlock() pairs,
and replace accordingly, too. The coef_mutex_lock() and *_unlock()
are moved to readtek.h as static inline functions along with it.
Only code refactoring, and no behavior change.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250827072916.31933-12-tiwai@suse.de
There are temporary DSP locking/unlocking patterns found in various
places, and those can be cleaned up nicely with the guard() macro
calling snd_hdac_dsp_lock() and *_unlock().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250827072916.31933-7-tiwai@suse.de
The new macro CLASS(snd_hda_power_pm) can replace the manual
snd_hda_power_up_pm() and _down() calls gracefully.
A part of the code in codec_exec_verb() is factored out to a function,
so that the auto-cleanup can be well scoped.
Merely cleanups and no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250827072916.31933-6-tiwai@suse.de
The new macro CLASS(snd_hda_power_pm) can replace the manual
snd_hda_power_up_pm() and _down() calls gracefully.
Merely code cleanups and no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250827072916.31933-5-tiwai@suse.de
The new macro CLASS(snd_hda_power_pm) can replace the manual
snd_hda_power_up_pm() and _down() calls gracefully.
Merely code cleanups and no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250827072916.31933-4-tiwai@suse.de
The new macro CLASS(snd_hda_power) can replace the manual
snd_hda_power_up() and _down() calls as well as the *_pm_*() variants
gracefully.
Merely code cleanups and no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250827072916.31933-3-tiwai@suse.de
The temporary power up/down of the codec via snd_hda_power_up() and
_down() (or snd_hda_power_up_pm() and _down_pm()) is seen in various
places. This patch introduces simple auto-cleanup macros for those
call patterns, so that the drivers don't have to call the
corresponding power-down calls explicitly.
Namely,
err = snd_hda_power_up(codec);
if (err < 0)
return err;
....
snd_power_down(codec);
can drop the *_down() call by replacing with
CLASS(snd_hda_power, pm)(codec);
if (pm.err < 0)
return pm.err;
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250827072916.31933-2-tiwai@suse.de
