XFS support for zoned block devices requires the realtime subvolume
support (XFS_RT) to be enabled. Change the default configuration value
of XFS_RT from N to CONFIG_BLK_DEV_ZONED to align with this requirement.
This change still allows the user to disable XFS_RT if this feature is
not desired for the user use case.
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Amlogic G12 exposes PCIe clock request signal on GPIOC_7 pinmux func 1
Add the relevant pinmux and pin groups
Signed-off-by: Da Xue <da@libre.computer>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/20250814181236.1956731-1-da@libre.computer
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The ASUS ProArt PX13 has a spurious wakeup event from the touchpad
a few moments after entering hardware sleep. This can be avoided
by preventing the touchpad from being a wake source.
Add to the wakeup ignore list.
Reported-by: Amit Chaudhari <amitchaudhari@mac.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4482
Tested-by: Amit Chaudhari <amitchaudhari@mac.com>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://lore.kernel.org/20250814183430.3887973-1-superm1@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add the bus_prot_blocks handle and declare num_bus_prot_blocks to
allow all of the currently supported AArch64 MediaTek SoCs to use
the new style regmap retrieval in the driver when a new style
devicetree declaring the mediatek,bus-protection phandle(s) in
the main power controller node is found.
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250805074746.29457-10-angelogioacchino.delregno@collabora.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
New generation SoCs use a new RTFF Hardware to save power during
operation of various IPs, other than managing isolation of the
internal buck converters during powerup/down of power domains.
Since some of the power domains need different RTFF handling, add
a new scpys_rtff_type enumeration and hold the value for each
power domain in struct scpsys_domain_data.
If RTFF HW is available, the RTFF additional power sequences are
handled in scpsys_ctl_pwrseq_{on,off}().
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250805074746.29457-9-angelogioacchino.delregno@collabora.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Add support for the modem power domains by adding its specific
power sequence in functions scpsys_modem_pwrseq_{on,off}() and
call them if the flag MTK_SCPD_MODEM_PWRSEQ is present.
While at it, since some SoC models need to skip setting/clearing
the PWR_RST_B_BIT, also add a MTK_SCPD_SKIP_RESET_B flag for that.
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250805074746.29457-8-angelogioacchino.delregno@collabora.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
In preparation to support power domains of new SoCs and the modem
power domains for both new and already supported chips, move the
generic control power sequences out of the scpsys_power_on() and
scpsys_power_off() and put them in new scpsys_ctl_pwrseq_on(),
scpsys_ctl_pewseq_off() functions.
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250805074746.29457-7-angelogioacchino.delregno@collabora.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Some SoCs, and even some subsystems in the same SoC, may have the
logic for SRAM power-down inverted, as in, setting the bit means
"power down" and unsetting means "power up": this is because some
hardware subsystems use this as a power-lock indication and some
use this as a power down one (for example, usually, the modem ss
has it inverted!).
In preparation for adding support for power domains with inverted
SRAM_PDN bits, add a new MTK_SCPD_SRAM_PDN_INVERTED flag and check
for it in scpsys_sram_enable() and scpsys_sram_disable().
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250805074746.29457-6-angelogioacchino.delregno@collabora.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
In preparation to add support for new generation SoCs like MT8196,
MT6991 and other variants, which require to set bus protection on
different busses than the ones found on legacy chips, and to also
simplify and reduce memory footprint of this driver, refactor the
mechanism to retrieve and use the bus protection regmaps.
This is done by removing the three pointers to struct regmap from
struct scpsys_domain (allocated for each power domain) and moving
them to the main struct scpsys (allocated per driver instance) as
an array of pointers to regmap named **bus_prot.
That deprecates the old devicetree properties to grab phandles to
the three predefined busses (infracfg, infracfg-nao and smi) and
replaces it with the base property "access-controllers" that is
meant to be an array of phandles holding the same busses where
required (for now - for legacy SoCs).
The new bus protection phandles are indexed by the bus_prot_index
member of struct scpsys, used to map "bus type" (ex.: infra, smi,
etc) to the specific *bus_prot[x] element.
While the old per-power-domain regmap pointers were removed, the
support for old devicetree was retained by still checking if the
new property (in DT) and new-style declaration (in SoC specific
platform data) are both present at probe time.
If those are not present, a lookup for the old properties will be
done in all of the children of the power controller, and pointers
to regmaps will be retrieved with the old properties, but then
will be internally remapped to follow the new style regmap anyway
as to let this driver benefit of the memory footprint reduction.
Finally, it was necessary to change macros in mtk-pm-domains.h and
in mt8365-pm-domains.h to make use of the new style bus protection
declaration, as the actual HW block is now recognized not by flags
but by its own scpsys_bus_prot_block enumeration.
The BUS_PROT_(STA)_COMPONENT_{INFRA,INFRA_NAO,SMI} flags were also
removed since they are now unused, and because that enumeration was
initially meant to vary the logic of bus protection and not the bus
where work is performed, anyway!
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250805074746.29457-5-angelogioacchino.delregno@collabora.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Merge the immutable branch dt into next, to allow the DT bindings to be
tested together with changes that are targeted for v6.18.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Allow specifying access-controllers in the main power controller
node and deprecate the old mediatek,infracfg, mediatek,infracfg-nao
and mediatek,smi properties located in the children.
This is done in order to both simplify the power controller
nodes and in preparation for adding support for new generation
SoCs like MT8196/MT6991 and other variants, which will need
to set protection on new busses.
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250805074746.29457-4-angelogioacchino.delregno@collabora.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Merge the pmdomain fixes for v6.17-rc[n] into the next branch, to allow
them to get tested together with the new changes that are targeted for
v6.18.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The dev_err_probe() doesn't do anything when error is '-ENOMEM'. Therefore,
remove the useless call to dev_err_probe(), and just return the value instead.
Signed-off-by: Xichao Zhao <zhao.xichao@vivo.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://patch.msgid.link/20250819092044.549464-7-zhao.xichao@vivo.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The dev_err_probe() doesn't do anything when error is '-ENOMEM'. Therefore,
remove the useless call to dev_err_probe(), and just return the value instead.
Signed-off-by: Xichao Zhao <zhao.xichao@vivo.com>
Link: https://patch.msgid.link/20250819092044.549464-6-zhao.xichao@vivo.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The dev_err_probe() doesn't do anything when error is '-ENOMEM'. Therefore,
remove the useless call to dev_err_probe(), and just return the value instead.
Signed-off-by: Xichao Zhao <zhao.xichao@vivo.com>
Link: https://patch.msgid.link/20250819092044.549464-5-zhao.xichao@vivo.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The dev_err_probe() doesn't do anything when error is '-ENOMEM'. Therefore,
remove the useless call to dev_err_probe(), and just return the value instead.
Signed-off-by: Xichao Zhao <zhao.xichao@vivo.com>
Link: https://patch.msgid.link/20250819092044.549464-4-zhao.xichao@vivo.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The dev_err_probe() doesn't do anything when error is '-ENOMEM'. Therefore,
remove the useless call to dev_err_probe(), and just return the value instead.
Signed-off-by: Xichao Zhao <zhao.xichao@vivo.com>
Link: https://patch.msgid.link/20250819092044.549464-3-zhao.xichao@vivo.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The dev_err_probe() doesn't do anything when error is '-ENOMEM'. Therefore,
remove the useless call to dev_err_probe(), and just return the value instead.
Signed-off-by: Xichao Zhao <zhao.xichao@vivo.com>
Link: https://patch.msgid.link/20250819092044.549464-2-zhao.xichao@vivo.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Replace calls of devm_kzalloc() with devm_kcalloc() in aml_spisg_clk_init()
for safer memory allocation with built-in overflow protection, and replace
sizeof(struct clk_div_table) with sizeof(*tbl) to shorten the line.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Link: https://patch.msgid.link/20250819040239.434863-1-rongqianfeng@vivo.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds support for Single Mic ECNS module, used for echo
cancellation. It also makes use of audioreach_set_module_config to load
the calibration data for this module from ASoC tplg file.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250819100151.1294047-7-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix spelling mistakes in I2S_INTF_TYPE defines.
Reported-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250819100151.1294047-5-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This change adds support for static calibration data via ASoC topology
file. This static calibration data could include binary blob of data
that is required by specific module and is not part of topology tokens.
Reason for adding this support is to allow loading module specific data
that can not be part of the tplg tokens, example, Echo and Noise cancelling
module needs a blob of calibration data to function correctly.
This support is also one of the building block for adding speaker
protection support.
Tested this with Single Mic ECNS(Echo and Noise Cancellation).
tplg can now contain this calibration data like:
SectionWidget."stream2.SMECNS_V224" {
...
data [
...
"stream2.SMECNS_V224_cfg_data"
]
}
SectionData."stream2.SMECNS_V224_cfg_data" {
words "0x00000330, 0x01001006,0x00000000,0x00000000,
0x00004145,0x08001026,0x00000004,0x00000000,
..."
}
}
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250819100151.1294047-4-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add documentation of possible values for I2S interface types,
currently this is only documented for DMA module.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250819100151.1294047-3-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Deprecate usage of AR_TKN_U32_MODULE_IN_PORTS and
AR_TKN_U32_MODULE_OUT_PORTS as the connectivity of modules is taken care
by AR_TKN_U32_MODULE_SRC_OP_PORT_ID* and AR_TKN_U32_MODULE_DST_IN_PORT_ID*
Also this property is never used in the drivers.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250819100151.1294047-2-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit f08d0c3a71 ("pidfd: add PIDFD_SELF* sentinels to refer to own
thread/process") introduced a leak by acquiring a pid reference through
get_task_pid(), which increments pid->count but never drops it with
put_pid().
As a result, kmemleak reports unreferenced pid objects after running
tools/testing/selftests/pidfd/pidfd_test, for example:
unreferenced object 0xff1100206757a940 (size 160):
comm "pidfd_test", pid 16965, jiffies 4294853028
hex dump (first 32 bytes):
01 00 00 00 00 00 00 00 00 00 00 00 fd 57 50 04 .............WP.
5e 44 00 00 00 00 00 00 18 de 34 17 01 00 11 ff ^D........4.....
backtrace (crc cd8844d4):
kmem_cache_alloc_noprof+0x2f4/0x3f0
alloc_pid+0x54/0x3d0
copy_process+0xd58/0x1740
kernel_clone+0x99/0x3b0
__do_sys_clone3+0xbe/0x100
do_syscall_64+0x7b/0x2c0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Fix this by calling put_pid() after do_pidfd_send_signal() returns.
Fixes: f08d0c3a71 ("pidfd: add PIDFD_SELF* sentinels to refer to own thread/process")
Signed-off-by: Adrian Huang (Lenovo) <adrianhuang0701@gmail.com>
Link: https://lore.kernel.org/20250818134310.12273-1-adrianhuang0701@gmail.com
Tested-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Userspace doesn't expect a failure to list extended attributes:
$ ls -lA /sys/
ls: /sys/: No data available
ls: /sys/kernel: No data available
ls: /sys/power: No data available
ls: /sys/class: No data available
ls: /sys/devices: No data available
ls: /sys/dev: No data available
ls: /sys/hypervisor: No data available
ls: /sys/fs: No data available
ls: /sys/bus: No data available
ls: /sys/firmware: No data available
ls: /sys/block: No data available
ls: /sys/module: No data available
total 0
drwxr-xr-x 2 root root 0 Jan 1 1970 block
drwxr-xr-x 52 root root 0 Jan 1 1970 bus
drwxr-xr-x 88 root root 0 Jan 1 1970 class
drwxr-xr-x 4 root root 0 Jan 1 1970 dev
drwxr-xr-x 11 root root 0 Jan 1 1970 devices
drwxr-xr-x 3 root root 0 Jan 1 1970 firmware
drwxr-xr-x 10 root root 0 Jan 1 1970 fs
drwxr-xr-x 2 root root 0 Jul 2 09:43 hypervisor
drwxr-xr-x 14 root root 0 Jan 1 1970 kernel
drwxr-xr-x 251 root root 0 Jan 1 1970 module
drwxr-xr-x 3 root root 0 Jul 2 09:43 power
Fix it by simply reporting success when no extended attributes are
available instead of reporting ENODATA.
Link: https://lore.kernel.org/78b13bcdae82ade95e88f315682966051f461dde.camel@linaro.org
Fixes: d1f4e90260 ("kernfs: remove iattr_mutex") # mainline only
Reported-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/20250819-ahndung-abgaben-524a535f8101@brauner
Signed-off-by: Christian Brauner <brauner@kernel.org>
The coredump_parse() function is bool type. It should return true on
success and false on failure. The cn_printf() returns zero on success
or negative error codes. This mismatch means that when "return err;"
here, it is treated as success instead of failure. Change it to return
false instead.
Fixes: a5715af549 ("coredump: make coredump_parse() return bool")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/aKRGu14w5vPSZLgv@stanley.mountain
Signed-off-by: Christian Brauner <brauner@kernel.org>
There's issue as follows:
BUG: KASAN: stack-out-of-bounds in end_buffer_read_sync+0xe3/0x110
Read of size 8 at addr ffffc9000168f7f8 by task swapper/3/0
CPU: 3 UID: 0 PID: 0 Comm: swapper/3 Not tainted 6.16.0-862.14.0.6.x86_64
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
Call Trace:
<IRQ>
dump_stack_lvl+0x55/0x70
print_address_description.constprop.0+0x2c/0x390
print_report+0xb4/0x270
kasan_report+0xb8/0xf0
end_buffer_read_sync+0xe3/0x110
end_bio_bh_io_sync+0x56/0x80
blk_update_request+0x30a/0x720
scsi_end_request+0x51/0x2b0
scsi_io_completion+0xe3/0x480
? scsi_device_unbusy+0x11e/0x160
blk_complete_reqs+0x7b/0x90
handle_softirqs+0xef/0x370
irq_exit_rcu+0xa5/0xd0
sysvec_apic_timer_interrupt+0x6e/0x90
</IRQ>
Above issue happens when do ntfs3 filesystem mount, issue may happens
as follows:
mount IRQ
ntfs_fill_super
read_cache_page
do_read_cache_folio
filemap_read_folio
mpage_read_folio
do_mpage_readpage
ntfs_get_block_vbo
bh_read
submit_bh
wait_on_buffer(bh);
blk_complete_reqs
scsi_io_completion
scsi_end_request
blk_update_request
end_bio_bh_io_sync
end_buffer_read_sync
__end_buffer_read_notouch
unlock_buffer
wait_on_buffer(bh);--> return will return to caller
put_bh
--> trigger stack-out-of-bounds
In the mpage_read_folio() function, the stack variable 'map_bh' is
passed to ntfs_get_block_vbo(). Once unlock_buffer() unlocks and
wait_on_buffer() returns to continue processing, the stack variable
is likely to be reclaimed. Consequently, during the end_buffer_read_sync()
process, calling put_bh() may result in stack overrun.
If the bh is not allocated on the stack, it belongs to a folio. Freeing
a buffer head which belongs to a folio is done by drop_buffers() which
will fail to free buffers which are still locked. So it is safe to call
put_bh() before __end_buffer_read_notouch().
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Ye Bin <yebin10@huawei.com>
Link: https://lore.kernel.org/20250811141830.343774-1-yebin@huaweicloud.com
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
to simplify the code.
Note that only tpid and max_fds really need rcu_read_lock(), we could move
task_ppid_nr_ns/task_tgid_nr_ns/task_numa_group_id/get_task_cred outside of
rcu read section.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/20250810173620.GA20007@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
task_pid_vnr(another_task) will crash if the caller was already reaped.
The pid_alive(current) check can't really help, the parent/debugger can
call release_task() right after this check.
This also means that even task_ppid_nr_ns(current, NULL) is not safe,
pid_alive() only ensures that it is safe to dereference ->real_parent.
Change __task_pid_nr_ns() to ensure ns != NULL.
Originally-by: 高翔 <gaoxiang17@xiaomi.com>
Link: https://lore.kernel.org/all/20250802022123.3536934-1-gxxa03070307@gmail.com/
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/20250810173604.GA19991@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
This files is maintained by Christian Brauner, thus add it to the
relevant MAINTAINERS entry.
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/20250714124637.1905722-2-aliceryhl@google.com
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Update call sites in the fs subsystem to import `ARef` and
`AlwaysRefCounted` from `sync::aref` instead of `types`.
This aligns with the ongoing effort to move `ARef` and
`AlwaysRefCounted` to sync.
Suggested-by: Benno Lossin <lossin@kernel.org>
Link: https://github.com/Rust-for-Linux/linux/issues/1173
Acked-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Shankari Anand <shankari.ak0208@gmail.com>
Link: https://lore.kernel.org/20250814100101.304408-1-shankari.ak0208@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Tegra186 contains two pin controllers. Document their compatible strings
and describe the list of pins and functions that they provide.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Link: https://lore.kernel.org/20250812-tegra186-pinctrl-v3-1-115714eeecb1@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The current gpio driver for RP1 shows only the very first register
from sysfs, e.g.:
$ cat /sys/kernel/debug/regmap/1f000d0000.gpio-rp1-pinctrl/registers
0: 0abe0000
Add the correct ranges to the regmap configuration.
Signed-off-by: Andrea della Porta <andrea.porta@suse.com>
Link: https://lore.kernel.org/20250812092618.14270-1-andrea.porta@suse.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Mount options (uid, gid, mode) are silently ignored when debugfs is
mounted. This is a regression introduced during the conversion to the
new mount API.
When the mount API conversion was done, the parsed options were never
applied to the superblock when it was reused. As a result, the mount
options were ignored when debugfs was mounted.
Fix this by following the same pattern as the tracefs fix in commit
e4d32142d1 ("tracing: Fix tracefs mount options"). Call
debugfs_reconfigure() in debugfs_get_tree() to apply the mount options
to the superblock after it has been created or reused.
As an example, with the bug the "mode" mount option is ignored:
$ mount -o mode=0666 -t debugfs debugfs /tmp/debugfs_test
$ mount | grep debugfs_test
debugfs on /tmp/debugfs_test type debugfs (rw,relatime)
$ ls -ld /tmp/debugfs_test
drwx------ 25 root root 0 Aug 4 14:16 /tmp/debugfs_test
With the fix applied, it works as expected:
$ mount -o mode=0666 -t debugfs debugfs /tmp/debugfs_test
$ mount | grep debugfs_test
debugfs on /tmp/debugfs_test type debugfs (rw,relatime,mode=666)
$ ls -ld /tmp/debugfs_test
drw-rw-rw- 37 root root 0 Aug 2 17:28 /tmp/debugfs_test
Fixes: a20971c187 ("vfs: Convert debugfs to use the new mount API")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220406
Cc: stable@vger.kernel.org
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Charalampos Mitrodimas <charmitro@posteo.net>
Link: https://lore.kernel.org/20250816-debugfs-mount-opts-v3-1-d271dad57b5b@posteo.net
Signed-off-by: Christian Brauner <brauner@kernel.org>
Update call sites in `pid_namespace.rs` to import
`AlwaysRefCounted` from `sync::aref` instead of `types`.
This aligns with the ongoing effort to move `ARef` and
`AlwaysRefCounted` to `sync`.
Suggested-by: Benno Lossin <lossin@kernel.org>
Link: https://github.com/Rust-for-Linux/linux/issues/1173
Signed-off-by: Shankari Anand <shankari.ak0208@gmail.com>
Link: https://lore.kernel.org/20250816122323.11657-1-shankari.ak0208@gmail.com
Reviewed-by: Benno Lossin <lossin@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
In get_channel(), the reference obtained by bus_find_device_by_name()
was dropped via put_device() before accessing the device's driver data
Move put_device() after usage to avoid potential issues.
Fixes: 2485055394 ("staging: most: core: drop device reference")
Cc: stable <stable@kernel.org>
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20250804082955.3621026-1-linmq006@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The `insn_rw_emulate_bits()` function is used as a default handler for
`INSN_READ` instructions for subdevices that have a handler for
`INSN_BITS` but not for `INSN_READ`. Similarly, it is used as a default
handler for `INSN_WRITE` instructions for subdevices that have a handler
for `INSN_BITS` but not for `INSN_WRITE`. It works by emulating the
`INSN_READ` or `INSN_WRITE` instruction handling with a constructed
`INSN_BITS` instruction. However, `INSN_READ` and `INSN_WRITE`
instructions are supposed to be able read or write multiple samples,
indicated by the `insn->n` value, but `insn_rw_emulate_bits()` currently
only handles a single sample. For `INSN_READ`, the comedi core will
copy `insn->n` samples back to user-space. (That triggered KASAN
kernel-infoleak errors when `insn->n` was greater than 1, but that is
being fixed more generally elsewhere in the comedi core.)
Make `insn_rw_emulate_bits()` either handle `insn->n` samples, or return
an error, to conform to the general expectation for `INSN_READ` and
`INSN_WRITE` handlers.
Fixes: ed9eccbe89 ("Staging: add comedi core")
Cc: stable <stable@kernel.org> # 5.13+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20250725141034.87297-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
