After the call to phy_disconnect() netdev->phydev is reset to NULL.
So fixed_phy_unregister() would be called with a NULL pointer as argument.
Therefore cache the phy_device before this call.
Fixes: e24a6c8746 ("net: ftgmac100: Get link speed and duplex for NC-SI")
Cc: stable@vger.kernel.org
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Dawid Osuchowski <dawid.osuchowski@linux.intel.com>
Link: https://patch.msgid.link/2b80a77a-06db-4dd7-85dc-3a8e0de55a1d@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Emails to alexandru.tachici@analog.com bounce permanently:
Remote Server returned '550 5.1.10 RESOLVER.ADR.RecipientNotFound; Recipient not found by SMTP address lookup'
so replace him with Marcelo Schmitt from Analog.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Link: https://patch.msgid.link/20250724113758.61874-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A large DMA mapping request can loop through dma address pinning for
many pages. In cases where THP can not be used, the repeated vmf_insert_pfn can
be costly, so let the task reschedule as need to prevent CPU stalls. Failure to
do so has potential harmful side effects, like increased memory pressure
as unrelated rcu tasks are unable to make their reclaim callbacks and
result in OOM conditions.
rcu: INFO: rcu_sched self-detected stall on CPU
rcu: 36-....: (20999 ticks this GP) idle=b01c/1/0x4000000000000000 softirq=35839/35839 fqs=3538
rcu: hardirqs softirqs csw/system
rcu: number: 0 107 0
rcu: cputime: 50 0 10446 ==> 10556(ms)
rcu: (t=21075 jiffies g=377761 q=204059 ncpus=384)
...
<TASK>
? asm_sysvec_apic_timer_interrupt+0x16/0x20
? walk_system_ram_range+0x63/0x120
? walk_system_ram_range+0x46/0x120
? pgprot_writethrough+0x20/0x20
lookup_memtype+0x67/0xf0
track_pfn_insert+0x20/0x40
vmf_insert_pfn_prot+0x88/0x140
vfio_pci_mmap_huge_fault+0xf9/0x1b0 [vfio_pci_core]
__do_fault+0x28/0x1b0
handle_mm_fault+0xef1/0x2560
fixup_user_fault+0xf5/0x270
vaddr_get_pfns+0x169/0x2f0 [vfio_iommu_type1]
vfio_pin_pages_remote+0x162/0x8e0 [vfio_iommu_type1]
vfio_iommu_type1_ioctl+0x1121/0x1810 [vfio_iommu_type1]
? futex_wake+0x1c1/0x260
x64_sys_call+0x234/0x17a0
do_syscall_64+0x63/0x130
? exc_page_fault+0x63/0x130
entry_SYSCALL_64_after_hwframe+0x4b/0x53
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/r/20250715184622.3561598-1-kbusch@meta.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Extend the qat_vfio_pci variant driver to support QAT 6xxx Virtual
Functions (VFs). Add the relevant QAT 6xxx VF device IDs to the driver's
probe table, enabling proper detection and initialization of these devices.
Update the module description to reflect that the driver now supports all
QAT generations.
Signed-off-by: Małgorzata Mielnik <malgorzata.mielnik@intel.com>
Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Link: https://lore.kernel.org/r/20250715081150.1244466-1-suman.kumar.chakraborty@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This was missed during the initial implementation. The VFIO PCI encodes
the vf_token inside the device name when opening the device from the group
FD, something like:
"0000:04:10.0 vf_token=bd8d9d2b-5a5f-4f5a-a211-f591514ba1f3"
This is used to control access to a VF unless there is co-ordination with
the owner of the PF.
Since we no longer have a device name in the cdev path, pass the token
directly through VFIO_DEVICE_BIND_IOMMUFD using an optional field
indicated by VFIO_DEVICE_BIND_FLAG_TOKEN.
Fixes: 5fcc26969a ("vfio: Add VFIO_DEVICE_BIND_IOMMUFD")
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/0-v3-bdd8716e85fe+3978a-vfio_token_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Alienware calls this key "Performance Boost". Dell calls it "G-Mode".
The goal is to have a specific keycode to detect when this key is
pressed, so userspace can act upon it and do what have to do, usually
starting the power profile for performance.
Signed-off-by: Marcos Alano <marcoshalano@gmail.com>
Link: https://lore.kernel.org/r/20250509193708.2190586-1-marcoshalano@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Hold PTL in pagemap_hugetlb_range() and gather_hugetlb_stats() to avoid
operating on stale page, as pagemap_pmd_range() and gather_pte_stats()
have done.
Link: https://lkml.kernel.org/r/20250724090958.455887-3-tujinjiang@huawei.com
Signed-off-by: Jinjiang Tu <tujinjiang@huawei.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Andrei Vagin <avagin@gmail.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Brahmajit Das <brahmajit.xyz@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: David Rientjes <rientjes@google.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Joern Engel <joern@logfs.org>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Thiago Jung Bauermann <thiago.bauermann@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
smaps_hugetlb_range() handles the pte without holdling ptl, and may be
concurrenct with migration, leaing to BUG_ON in pfn_swap_entry_to_page().
The race is as follows.
smaps_hugetlb_range migrate_pages
huge_ptep_get
remove_migration_ptes
folio_unlock
pfn_swap_entry_folio
BUG_ON
To fix it, hold ptl lock in smaps_hugetlb_range().
Link: https://lkml.kernel.org/r/20250724090958.455887-1-tujinjiang@huawei.com
Link: https://lkml.kernel.org/r/20250724090958.455887-2-tujinjiang@huawei.com
Fixes: 25ee01a2fc ("mm: hugetlb: proc: add hugetlb-related fields to /proc/PID/smaps")
Signed-off-by: Jinjiang Tu <tujinjiang@huawei.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Andrei Vagin <avagin@gmail.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Brahmajit Das <brahmajit.xyz@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: David Rientjes <rientjes@google.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Joern Engel <joern@logfs.org>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Thiago Jung Bauermann <thiago.bauermann@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
A soft lockup warning was observed on a relative small system x86-64
system with 16 GB of memory when running a debug kernel with kmemleak
enabled.
watchdog: BUG: soft lockup - CPU#8 stuck for 33s! [kworker/8:1:134]
The test system was running a workload with hot unplug happening in
parallel. Then kemleak decided to disable itself due to its inability to
allocate more kmemleak objects. The debug kernel has its
CONFIG_DEBUG_KMEMLEAK_MEM_POOL_SIZE set to 40,000.
The soft lockup happened in kmemleak_do_cleanup() when the existing
kmemleak objects were being removed and deleted one-by-one in a loop via a
workqueue. In this particular case, there are at least 40,000 objects
that need to be processed and given the slowness of a debug kernel and the
fact that a raw_spinlock has to be acquired and released in
__delete_object(), it could take a while to properly handle all these
objects.
As kmemleak has been disabled in this case, the object removal and
deletion process can be further optimized as locking isn't really needed.
However, it is probably not worth the effort to optimize for such an edge
case that should rarely happen. So the simple solution is to call
cond_resched() at periodic interval in the iteration loop to avoid soft
lockup.
Link: https://lkml.kernel.org/r/20250728190248.605750-1-longman@redhat.com
Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Since I'm actively working on hung task blocker detector, add myself to a
reviewer of the HUNG TASK DETECTOR feature.
Link: https://lkml.kernel.org/r/175388550841.627474.3260499035226455392.stgit@devnote2
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Lance Yang <lance.yang@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When netpoll is enabled, calling pr_warn_once() while holding
kmemleak_lock in mem_pool_alloc() can cause a deadlock due to lock
inversion with the netconsole subsystem. This occurs because
pr_warn_once() may trigger netpoll, which eventually leads to
__alloc_skb() and back into kmemleak code, attempting to reacquire
kmemleak_lock.
This is the path for the deadlock.
mem_pool_alloc()
-> raw_spin_lock_irqsave(&kmemleak_lock, flags);
-> pr_warn_once()
-> netconsole subsystem
-> netpoll
-> __alloc_skb
-> __create_object
-> raw_spin_lock_irqsave(&kmemleak_lock, flags);
Fix this by setting a flag and issuing the pr_warn_once() after
kmemleak_lock is released.
Link: https://lkml.kernel.org/r/20250731-kmemleak_lock-v1-1-728fd470198f@debian.org
Fixes: c566586818 ("mm: kmemleak: use the memory pool for early allocations")
Signed-off-by: Breno Leitao <leitao@debian.org>
Reported-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The kunit test is using assignments to
"static volatile void *kasan_ptr_result" to prevent elision of memory
loads, but that's not working:
In this variable definition, the "volatile" applies to the "void", not to
the pointer.
To make "volatile" apply to the pointer as intended, it must follow
after the "*".
This makes the kasan_memchr test pass again on my system. The
kasan_strings test is still failing because all the definitions of
load_unaligned_zeropad() are lacking explicit instrumentation hooks and
ASAN does not instrument asm() memory operands.
Link: https://lkml.kernel.org/r/20250728-kasan-kunit-fix-volatile-v1-1-e7157c9af82d@google.com
Fixes: 5f1c8108e7 ("mm:kasan: fix sparse warnings: Should it be static?")
Signed-off-by: Jann Horn <jannh@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Nihar Chaithanya <niharchaithanya@gmail.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Exercise various mmap(), munmap() and mremap() invocations, which might
cause a perf buffer mapping to be split or truncated.
To avoid hard coding the perf event and having dependencies on
architectures and configuration options, scan through event types in sysfs
and try to open them. On success, try to mmap() and if that succeeds try to
mmap() the AUX buffer.
In case that no AUX buffer supporting event is found, only test the base
buffer mapping. If no mappable event is found or permissions are not
sufficient, skip the tests.
Reserve a PROT_NONE region for both rb and aux tests to allow testing the
case where mremap unmaps beyond the end of a mapped VMA to prevent it from
unmapping unrelated mappings.
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Co-developed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
The perf mmap code is careful about mmap()'ing the user page with the
ringbuffer and additionally the auxiliary buffer, when the event supports
it. Once the first mapping is established, subsequent mapping have to use
the same offset and the same size in both cases. The reference counting for
the ringbuffer and the auxiliary buffer depends on this being correct.
Though perf does not prevent that a related mapping is split via mmap(2),
munmap(2) or mremap(2). A split of a VMA results in perf_mmap_open() calls,
which take reference counts, but then the subsequent perf_mmap_close()
calls are not longer fulfilling the offset and size checks. This leads to
reference count leaks.
As perf already has the requirement for subsequent mappings to match the
initial mapping, the obvious consequence is that VMA splits, caused by
resizing of a mapping or partial unmapping, have to be prevented.
Implement the vm_operations_struct::may_split() callback and return
unconditionally -EINVAL.
That ensures that the mapping offsets and sizes cannot be changed after the
fact. Remapping to a different fixed address with the same size is still
possible as it takes the references for the new mapping and drops those of
the old mapping.
Fixes: 45bfb2e504 ("perf: Add AUX area to ring buffer for raw data streams")
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-27504
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: stable@vger.kernel.org
After successful allocation of a buffer or a successful attachment to an
existing buffer perf_mmap() tries to map the buffer read only into the page
table. If that fails, the already set up page table entries are zapped, but
the other perf specific side effects of that failure are not handled. The
calling code just cleans up the VMA and does not invoke perf_mmap_close().
This leaks reference counts, corrupts user->vm accounting and also results
in an unbalanced invocation of event::event_mapped().
Cure this by moving the event::event_mapped() invocation before the
map_range() call so that on map_range() failure perf_mmap_close() can be
invoked without causing an unbalanced event::event_unmapped() call.
perf_mmap_close() undoes the reference counts and eventually frees buffers.
Fixes: b709eb872e ("perf: map pages in advance")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: stable@vger.kernel.org
When perf_mmap() fails to allocate a buffer, it still invokes the
event_mapped() callback of the related event. On X86 this might increase
the perf_rdpmc_allowed reference counter. But nothing undoes this as
perf_mmap_close() is never called in this case, which causes another
reference count leak.
Return early on failure to prevent that.
Fixes: 1e0fb9ec67 ("perf: Add pmu callbacks to track event mapping and unmapping")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: stable@vger.kernel.org
Failure of the AUX buffer allocation leaks the reference count.
Set the reference count to 1 only when the allocation succeeds.
Fixes: 45bfb2e504 ("perf: Add AUX area to ring buffer for raw data streams")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: stable@vger.kernel.org
A recent overhaul sets the return value to 0 unconditionally after the
allocations, which causes reference count leaks and corrupts the user->vm
accounting.
Preserve the AUX buffer allocation failure return value, so that the
subsequent code works correctly.
Fixes: 0983593f32 ("perf/core: Lift event->mmap_mutex in perf_mmap()")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: stable@vger.kernel.org
Since we are expecting that all configuration directory names
will match some of the existing devices, we can't provide any
configuration for the VFs until they are actually enabled.
But we can relax that restriction by just checking if there
is a PF device that could create given VF. This is easy since
all our PF devices are always present at function 0 and we can
query PF device for number of VFs it could support.
Then for some system with PF device at 0000:00:02.0 we can add
configs for all VFs:
/sys/kernel/config/xe/
├── 0000:00:02.0
│ └── ...
├── 0000:00:02.1
│ └── ...
├── 0000:00:02.2
│ └── ...
:
└── 0000:00:02.7
└── ...
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250731212145.179898-1-michal.wajdeczko@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Since we already lookup for the real PCI device before we allow
to create its directory config, we might also check if the found
device matches our driver PCI ID list. This will prevent creation
of the directory configs for the unsupported devices.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250731193339.179829-11-michal.wajdeczko@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
For easier maintenance add a placeholder where we can keep all
default device configuration settings in one place.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250731193339.179829-9-michal.wajdeczko@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
This time it will hold just pure configuration parameters, without
any configfs related stuff. This will help us define defaults data
without wasting space for unneeded data.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250731193339.179829-8-michal.wajdeczko@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
This helper name shouldn't suggest that it iss a part of the core
configfs API family. While around switch to use different helper
to release a reference.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250731193339.179829-7-michal.wajdeczko@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Rename it to struct xe_config_group_device to better match its
purpose. It will also help us to reintroduce in the upcoming patch
the same struct name but this time to hold only configuration data.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250731193339.179829-6-michal.wajdeczko@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
There is no need to print separate error message since we will
also print one in xe_init(). Also drop temporary variable, which
was likely just taken from the example code.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250731193339.179829-5-michal.wajdeczko@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
While mutex_destroy() is NOP when CONFIG_DEBUG_MUTEXES is not
enabled, we should still call it.
While around, drop a trailing line.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250731193339.179829-4-michal.wajdeczko@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
We should provide a hint to the user why the module refused to
load. This will also allow us to drop individual error messages
from init steps.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250731193339.179829-3-michal.wajdeczko@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
There is no need to have extra checks and WARN() in the helpers
as instead of an index of the entry with function pointers, we
can pass pointer to the entry which we prepare directly in the
main loop, that is guaranteed to be valid.
add/remove: 0/0 grow/shrink: 0/4 up/down: 0/-180 (-180)
Function old new delta
xe_exit 109 79 -30
cleanup_module 109 79 -30
xe_init 248 188 -60
init_module 248 188 -60
Total: Before=2774145, After=2773965, chg -0.01%
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250731193339.179829-2-michal.wajdeczko@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
This is step 3/4 of a patch series to fix mid_q_entry memory leaks
caused by race conditions in callback execution.
Replace the mid_flags bitmask with dedicated boolean fields to
simplify locking logic and improve code readability:
- Replace MID_DELETED with bool deleted_from_q
- Replace MID_WAIT_CANCELLED with bool wait_cancelled
- Remove mid_flags field entirely
The new boolean fields have clearer semantics:
- deleted_from_q: whether mid has been removed from pending_mid_q
- wait_cancelled: whether request was cancelled during wait
This change reduces memory usage (from 4-byte bitmask to 2 boolean
flags) and eliminates confusion about which lock protects which
flag bits, preparing for per-mid locking in the next patch.
Signed-off-by: Wang Zhaolong <wangzhaolong@huaweicloud.com>
Acked-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
This is step 2/4 of a patch series to fix mid_q_entry memory leaks
caused by race conditions in callback execution.
Add a dedicated mid_counter_lock to protect current_mid counter,
separating it from mid_queue_lock which protects pending_mid_q
operations. This reduces lock contention and prepares for finer-
grained locking in subsequent patches.
Changes:
- Add TCP_Server_Info->mid_counter_lock spinlock
- Rename CurrentMid to current_mid for consistency
- Use mid_counter_lock to protect current_mid access
- Update locking documentation in cifsglob.h
This separation allows mid allocation to proceed without blocking
queue operations, improving performance under heavy load.
Signed-off-by: Wang Zhaolong <wangzhaolong@huaweicloud.com>
Acked-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
This is step 1/4 of a patch series to fix mid_q_entry memory leaks
caused by race conditions in callback execution.
The current mid_lock name is somewhat ambiguous about what it protects.
To prepare for splitting this lock into separate, more granular locks,
this patch renames mid_lock to mid_queue_lock to clearly indicate its
specific responsibility for protecting the pending_mid_q list and
related queue operations.
No functional changes are made in this patch - it only prepares the
codebase for the lock splitting that follows.
- mid_queue_lock for queue operations
- mid_counter_lock for mid counter operations
- per-mid locks for individual mid state management
Signed-off-by: Wang Zhaolong <wangzhaolong@huaweicloud.com>
Acked-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
Presently, multiple versions of the guc_waklv_enable_.* function exist,
all with different numbers of dwords added to the klv_entry array. This
is not extensible, and more duplicates of the function will need to be
created if it ever becomes necessary to support 3 or more dwords per wa
in the future.
Consolidate the disparate guc_waklv_enable functions into a single
guc_waklv_enable function that can take an arbitrary number of dword
values.
v2:
- Update length value properly (Shuicheng)
v3: (Harrison)
- Use data as a term instead of dwords or arr
- Reformat warning message to use hex values
- Eliminate need for kzalloc and klv_entry array
- Reorder function parameters to fix line wrapping
v4:
- Miscellaneous formatting fixes (Cavitt)
v5: (Harrison)
- s/data_range/data_len_dw
- Use data_len_dw to calculate size for xe_map_memcpy_to
Suggested-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Cc: Lucas De Marchi <lucas.demarch@intel.com>
Cc: Shuicheng Lin <shuicheng.lin@intel.com>
Cc: John Harrison <john.c.harrison@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://lore.kernel.org/r/20250728194806.68176-2-jonathan.cavitt@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Ever since commit c2ff29e99a ("siw: Inline do_tcp_sendpages()"),
we have been doing this:
static int siw_tcp_sendpages(struct socket *s, struct page **page, int offset,
size_t size)
[...]
/* Calculate the number of bytes we need to push, for this page
* specifically */
size_t bytes = min_t(size_t, PAGE_SIZE - offset, size);
/* If we can't splice it, then copy it in, as normal */
if (!sendpage_ok(page[i]))
msg.msg_flags &= ~MSG_SPLICE_PAGES;
/* Set the bvec pointing to the page, with len $bytes */
bvec_set_page(&bvec, page[i], bytes, offset);
/* Set the iter to $size, aka the size of the whole sendpages (!!!) */
iov_iter_bvec(&msg.msg_iter, ITER_SOURCE, &bvec, 1, size);
try_page_again:
lock_sock(sk);
/* Sendmsg with $size size (!!!) */
rv = tcp_sendmsg_locked(sk, &msg, size);
This means we've been sending oversized iov_iters and tcp_sendmsg calls
for a while. This has a been a benign bug because sendpage_ok() always
returned true. With the recent slab allocator changes being slowly
introduced into next (that disallow sendpage on large kmalloc
allocations), we have recently hit out-of-bounds crashes, due to slight
differences in iov_iter behavior between the MSG_SPLICE_PAGES and
"regular" copy paths:
(MSG_SPLICE_PAGES)
skb_splice_from_iter
iov_iter_extract_pages
iov_iter_extract_bvec_pages
uses i->nr_segs to correctly stop in its tracks before OoB'ing everywhere
skb_splice_from_iter gets a "short" read
(!MSG_SPLICE_PAGES)
skb_copy_to_page_nocache copy=iov_iter_count
[...]
copy_from_iter
/* this doesn't help */
if (unlikely(iter->count < len))
len = iter->count;
iterate_bvec
... and we run off the bvecs
Fix this by properly setting the iov_iter's byte count, plus sending the
correct byte count to tcp_sendmsg_locked.
Link: https://patch.msgid.link/r/20250729120348.495568-1-pfalcato@suse.de
Cc: stable@vger.kernel.org
Fixes: c2ff29e99a ("siw: Inline do_tcp_sendpages()")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202507220801.50a7210-lkp@intel.com
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Pedro Falcato <pfalcato@suse.de>
Acked-by: Bernard Metzler <bernard.metzler@linux.dev>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
If two calls to nfsd_open_local_fh() race and both successfully call
nfsd_file_acquire_local(), they will both get an extra reference to the
net to accompany the file reference stored in *pnf.
One of them will fail to store (using xchg()) the file reference in
*pnf and will drop that reference but WON'T drop the accompanying
reference to the net. This leak means that when the nfs server is shut
down it will hang in nfsd_shutdown_net() waiting for
&nn->nfsd_net_free_done.
This patch adds the missing nfsd_net_put().
Reported-by: Mike Snitzer <snitzer@kernel.org>
Fixes: e6f7e1487a ("nfs_localio: simplify interface to nfsd for getting nfsd_file")
Cc: stable@vger.kernel.org
Signed-off-by: NeilBrown <neil@brown.name>
Tested-by: Mike Snitzer <snitzer@kernel.org>
Reviewed-by: Mike Snitzer <snitzer@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Clients will typically precede a DELEGRETURN for a delegation with
delegated timestamp with a SETATTR to set the timestamps on the server
to match what the client has.
knfsd implements this by using the nfsd_setattr() infrastructure, which
will set ATTR_CTIME on any update that goes to notify_change(). This is
problematic as it means that the client will get a spurious ctime
update when updating the atime.
POSIX unfortunately doesn't phrase it succinctly, but updating the atime
due to reads should not update the ctime. In this case, the client is
sending a SETATTR to update the atime on the server to match its latest
value. The ctime should not be advanced in this case as that would
incorrectly indicate a change to the inode.
Fix this by not implicitly setting ATTR_CTIME when ATTR_DELEG is set in
__nfsd_setattr(). The decoder for FATTR4_WORD2_TIME_DELEG_MODIFY already
sets ATTR_CTIME, so this is sufficient to make it skip setting the ctime
on atime-only updates.
Fixes: 7e13f4f8d2 ("nfsd: handle delegated timestamps in SETATTR")
Cc: stable@vger.kernel.org
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
- Finish removing Coresight support
-----BEGIN PGP SIGNATURE-----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=HTDS
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux
Pull ARM update from Russell King:
"Just one development update this time:
- Finish removing Coresight support"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux:
ARM: 9449/1: coresight: Finish removal of Coresight support in arch/arm/kernel
- Use generic_write_sync instead of vfs_fsync_range in exfat_file_write_iter.
It will fix an issue where fdatasync would be set incorrectly.
- Fix potential infinite loop by the self-linked chain.
-----BEGIN PGP SIGNATURE-----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=wECt
-----END PGP SIGNATURE-----
Merge tag 'exfat-for-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat
Pull exfat updates from Namjae Jeon:
- Use generic_write_sync instead of vfs_fsync_range in exfat_file_write_iter.
It will fix an issue where fdatasync would be set incorrectly.
- Fix potential infinite loop by the self-linked chain.
* tag 'exfat-for-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
exfat: add cluster chain loop check for dir
exfat: fdatasync flag should be same like generic_write_sync()
- The 4 patch series "mseal cleanups" from Lorenzo Stoakes erforms some
mseal cleaning with no intended functional change.
- The 3 patch series "Optimizations for khugepaged" from David
Hildenbrand improves khugepaged throughput by batching PTE operations
for large folios. This gain is mainly for arm64.
- The 8 patch series "x86: enable EXECMEM_ROX_CACHE for ftrace and
kprobes" from Mike Rapoport provides a bugfix, additional debug code and
cleanups to the execmem code.
- The 7 patch series "mm/shmem, swap: bugfix and improvement of mTHP
swap in" from Kairui Song provides bugfixes, cleanups and performance
improvememnts to the mTHP swapin code.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaI+6HQAKCRDdBJ7gKXxA
jv7lAQCAKE5dUhdZ0pOYbhBKTlDapQh2KqHrlV3QFcxXgknEoQD/c3gG01rY3fLh
Cnf5l9+cdyfKxFniO48sUPx6IpriRg8=
=HT5/
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2025-08-03-12-35' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more MM updates from Andrew Morton:
"Significant patch series in this pull request:
- "mseal cleanups" (Lorenzo Stoakes)
Some mseal cleaning with no intended functional change.
- "Optimizations for khugepaged" (David Hildenbrand)
Improve khugepaged throughput by batching PTE operations for large
folios. This gain is mainly for arm64.
- "x86: enable EXECMEM_ROX_CACHE for ftrace and kprobes" (Mike Rapoport)
A bugfix, additional debug code and cleanups to the execmem code.
- "mm/shmem, swap: bugfix and improvement of mTHP swap in" (Kairui Song)
Bugfixes, cleanups and performance improvememnts to the mTHP swapin
code"
* tag 'mm-stable-2025-08-03-12-35' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (38 commits)
mm: mempool: fix crash in mempool_free() for zero-minimum pools
mm: correct type for vmalloc vm_flags fields
mm/shmem, swap: fix major fault counting
mm/shmem, swap: rework swap entry and index calculation for large swapin
mm/shmem, swap: simplify swapin path and result handling
mm/shmem, swap: never use swap cache and readahead for SWP_SYNCHRONOUS_IO
mm/shmem, swap: tidy up swap entry splitting
mm/shmem, swap: tidy up THP swapin checks
mm/shmem, swap: avoid redundant Xarray lookup during swapin
x86/ftrace: enable EXECMEM_ROX_CACHE for ftrace allocations
x86/kprobes: enable EXECMEM_ROX_CACHE for kprobes allocations
execmem: drop writable parameter from execmem_fill_trapping_insns()
execmem: add fallback for failures in vmalloc(VM_ALLOW_HUGE_VMAP)
execmem: move execmem_force_rw() and execmem_restore_rox() before use
execmem: rework execmem_cache_free()
execmem: introduce execmem_alloc_rw()
execmem: drop unused execmem_update_copy()
mm: fix a UAF when vma->mm is freed after vma->vm_refcnt got dropped
mm/rmap: add anon_vma lifetime debug check
mm: remove mm/io-mapping.c
...
Make vmem_pte_alloc() consistent by always allocating page table of
PAGE_SIZE granularity, regardless of whether page_table_alloc() (with
slab) or memblock_alloc() is used. This ensures page table can be fully
freed when the corresponding page table entries are removed.
Fixes: d08d4e7cd6 ("s390/mm: use full 4KB page for 2KB PTE")
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Mask the ERR_FATAL_MASK before scaler initialization.
After enabling the scaler and waiting for one frame,
unmask the previously masked bits, PS_ECC and
ERR_FATAL_MASK
Unmasking of ERR_FATAL_MASK bit is use for
validation purpose. There is no functional
impact.
v2: Remove intel_display_need_wa[Jani]
Optimize the ecc_unmask call[Animesh]
v3: Add intel_display_wa[Jani]
Signed-off-by: Nemesa Garg <nemesa.garg@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20250801125835.2337614-1-nemesa.garg@intel.com
Since $(LD) is directly used, hence -nostdlib is unneeded, MIPS has
removed this, we should remove it too.
bdbf2038fb ("MIPS: VDSO: remove -nostdlib compiler flag").
In fact, other architectures also use $(LD) now.
fe00e50b2d ("ARM: 8858/1: vdso: use $(LD) instead of $(CC) to link VDSO")
691efbedc6 ("arm64: vdso: use $(LD) instead of $(CC) to link VDSO")
2ff906994b ("MIPS: VDSO: Use $(LD) instead of $(CC) to link VDSO")
2b2a25845d ("s390/vdso: Use $(LD) instead of $(CC) to link vDSO")
Cc: stable@vger.kernel.org
Reviewed-by: Yanteng Si <siyanteng@cqsoftware.com.cn>
Signed-off-by: Wentao Guan <guanwentao@uniontech.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
The Loongson-2K2000 integrates one eMMC controller and one SDIO controller.
The module is supported now, enable it.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
The Loongson-2K1000 integrates one SDIO controller for SD storage cards
and SDIO cards.
The module is supported now, enable it.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
The Loongson-2K0500 integrates two SDIO controllers for SD storage cards
and SDIO cards, supporting SD storage card boot.
The module is supported now, enable it.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
JITs can set bpf_jit_bypass_spec_v1/v4() if they want the verifier to
skip analysis/patching for the respective vulnerability, it is safe to
set both bpf_jit_bypass_spec_v1/v4(), because there is no speculation
barrier instruction for LoongArch.
Suggested-by: Luis Gerhorst <luis.gerhorst@fau.de>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
In specific use cases combining tailcalls and BPF-to-BPF calls，
MAX_TAIL_CALL_CNT won't work because of missing tail_call_cnt
back-propagation from callee to caller. This patch fixes this
tailcall issue caused by abusing the tailcall in bpf2bpf feature
on LoongArch like the way of "bpf, x64: Fix tailcall hierarchy".
Push tail_call_cnt_ptr and tail_call_cnt into the stack,
tail_call_cnt_ptr is passed between tailcall and bpf2bpf,
uses tail_call_cnt_ptr to increment tail_call_cnt.
Fixes: bb035ef0cc ("LoongArch: BPF: Support mixing bpf2bpf and tailcalls")
Reviewed-by: Geliang Tang <geliang@kernel.org>
Reviewed-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Haoran Jiang <jianghaoran@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
