The fwnode_create_software_node() function returns error pointers. It
never returns NULL. Update the checks to match.
Fixes: f0e53aadd7 ("drm/xe: Support for I2C attached MCUs")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/65825d00-81ab-4665-af51-4fff6786a250@sabinyo.mountain
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 2f264d58cc)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
There is a static checker warning that gt returned by xe_device_get_gt can
be NULL and that is being dereferenced. Use xe_root_mmio_gt instead, which
is equivalent and cannot return a NULL gt 0.
Fixes: 10d42ef34b ("drm/xe/oa: Assign hwe for OAM_SAG")
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://lore.kernel.org/r/20250715181422.2807624-1-ashutosh.dixit@intel.com
(cherry picked from commit 308dc9b278)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
If the device is running older pcode firmware, it is possible that newer
mailbox commands are not supported by it. The sysfs attributes aren't
useful in that case, but we shouldn't fail driver probe because of it.
As of now, it is unknown if we can distinguish unsupported commands before
attempting them. But until we figure out a way to do that, fix the
regressions.
v2: Add debug message (Lucas)
Fixes: cdc36b66cd ("drm/xe: Expose fan control and voltage regulator version")
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Tested-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://lore.kernel.org/r/20250714215503.2897748-1-raag.jadav@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit ed5461daa1)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The assignment to ts is missing on the call to ktime_to_timespec64.
Fix this by adding the missing assignment.
Fixes: db6a94b263 ("drm/vmwgfx: Implement dma_fence_ops properly")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Ian Forbes <ian.forbes@broadcom.com>
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://lore.kernel.org/r/20250623223526.281398-1-colin.i.king@gmail.com
A few more updates, mostly fixes and device IDs plus some small
enhancements for the FSL xcvr driver.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmiHZP8ACgkQJNaLcl1U
h9DzHgf7B38+Y0biLZA4PbhoT4jIqx7Z6cjzw4enVAd+heYD8dCrYIf+7mADCi/1
0rjJ76k8FvYyXUihvd+7Tm+0K9kBy8RHjA/KKiNUHqk12JziKg6fnTQTO2/zinQO
VjIrVtMediD7lUVDJ8NeN/xwpl4UagpyYi7JdWM12bBpcpxE8Hz+nvYZiAQKfaLC
6Fde6G1tTYQsfVnpEdidqNCIvlRCXsFbeWfBa3BDEC2gZwDuozs+caDD4zDgirJ4
+K31t9d9yWD2oqJALB1HrUZ35edzvc+AmWE6CfWIaN7pxgwdqqOIbL2jdcOdV6Sy
pbxrbXFQ8FKMm8knO7BtSsHhVtm22Q==
=jUba
-----END PGP SIGNATURE-----
Merge tag 'asoc-v6.17-2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: More updates for v6.17
A few more updates, mostly fixes and device IDs plus some small
enhancements for the FSL xcvr driver.
Update header inclusions to follow IWYU (Include What You Use)
principle.
Note that kernel.h is discouraged to be included as it's written
at the top of that file.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
The MediaTek implementation of the sbsa_gwdt watchdog has a race
condition where a write to SBSA_GWDT_WRR is ignored if it occurs while
the hardware is processing a timeout refresh that asserts WS0.
Detect this based on the hardware implementer and adjust
wdd->min_hw_heartbeat_ms to avoid the race by forcing the keepalive ping
to be one second later.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Acked-by: Timur Tabi <ttabi@nvidia.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20250721230640.2244915-1-aplattner@nvidia.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
During communication with Focusrite Scarlett Gen 2/3/4 USB audio
interfaces, -EPROTO is sometimes returned from scarlett2_usb_tx(),
snd_usb_ctl_msg() which can cause initialisation and control
operations to fail intermittently.
This patch adds up to 5 retries in scarlett2_usb(), with a delay
starting at 5ms and doubling each time. This follows the same approach
as the fix for usb_set_interface() in endpoint.c (commit f406005e16
("ALSA: usb-audio: Add retry on -EPROTO from usb_set_interface()")),
which resolved similar -EPROTO issues during device initialisation,
and is the same approach as in fcp.c:fcp_usb().
Fixes: 9e4d5c1be2 ("ALSA: usb-audio: Scarlett Gen 2 mixer interface")
Closes: https://github.com/geoffreybennett/linux-fcp/issues/41
Cc: stable@vger.kernel.org
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://patch.msgid.link/aIdDO6ld50WQwNim@m.b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The mute led on this laptop is using ALC245 but requires a quirk to work
This patch enables the existing quirk for the device.
Tested on Victus 16-r1xxx Laptop. The LED behaviour works
as intended.
Cc: <stable@vger.kernel.org>
Signed-off-by: Edip Hazuri <edip@medip.dev>
Link: https://patch.msgid.link/20250725151436.51543-2-edip@medip.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Before commit df6d7277e5 ("i2c: core: Do not dereference fwnode in struct
device"), i2c_unregister_device() only called fwnode_handle_put() on
of_node-s in the form of calling of_node_put(client->dev.of_node).
But after this commit the i2c_client's fwnode now unconditionally gets
fwnode_handle_put() on it.
When the i2c_client has no primary (ACPI / OF) fwnode but it does have
a software fwnode, the software-node will be the primary node and
fwnode_handle_put() will put() it.
But for the software fwnode device_remove_software_node() will also put()
it leading to a double free:
[ 82.665598] ------------[ cut here ]------------
[ 82.665609] refcount_t: underflow; use-after-free.
[ 82.665808] WARNING: CPU: 3 PID: 1502 at lib/refcount.c:28 refcount_warn_saturate+0xba/0x11
...
[ 82.666830] RIP: 0010:refcount_warn_saturate+0xba/0x110
...
[ 82.666962] <TASK>
[ 82.666971] i2c_unregister_device+0x60/0x90
Fix this by not calling fwnode_handle_put() when the primary fwnode is
a software-node.
Fixes: df6d7277e5 ("i2c: core: Do not dereference fwnode in struct device")
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hansg@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Restricted pointers ("%pK") are not meant to be used through printk().
It can unintentionally expose security sensitive, raw pointer values.
Use regular pointer formatting instead.
Link: https://lore.kernel.org/lkml/20250113171731-dc10e3c1-da64-4af0-b767-7c7070468023@linutronix.de/
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
I am switching my address to a personal domain, so some files in the
SGI IP30 and IOC3 files need to be updated. I will send updates for
the MAINTAINERS file and rtc-ds1685 separately to linux-rtc.
Signed-off-by: Joshua Kinard <kumba@gentoo.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Let Potential update error just be a log instead of a big error
we already have Atomic Update error log which shouts out if
something really goes wrong.
--v2
-Fix typo in commit message [Mitul]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Link: https://lore.kernel.org/r/20250724102954.2573715-1-suraj.kandpal@intel.com
Besides an odd __builtin_constant_p() optimization the s390 specific
WARN_ON() implementation is identical to the generic variant.
Drop the s390 variant in favor of the generic variant.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org> # Rebased ancestor commits
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Link: https://lore.kernel.org/r/20250617135042.1878068-2-hca@linux.ibm.com
With the introduction of the condition string as part of the 'file'
string output of kernel warnings, the first line has become a bit
harder to read:
WARNING: CPU: 0 PID: 0 at [ptr == 0 && 1] kernel/sched/core.c:8511 sched_init+0x20/0x410
Re-order the fields by importance (higher to lower), make the 'at' meaningful
again, and add '->comm[]' output which is often more valuable than a PID.
Also, remove the 'PID' prefix - in combination with comm it's clear what it is.
These changes make the output only slightly longer:
WARNING: [ptr == 0 && 1] kernel/sched/core.c:8511 at sched_init+0x20/0x410 CPU#0: swapper/0
While adding more information and making it better organized.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org> # Rebased ancestor commits
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-arch@vger.kernel.org
Link: https://lore.kernel.org/r/20250515124644.2958810-16-mingo@kernel.org
Previous commit missed two other places that need converting, it only
came out in tests on autobuilders now. Convert the rest of the driver.
Fixes: 68bdc4dc11 ("MIPS: alchemy: gpio: use new line value setter callbacks")
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Link: https://lore.kernel.org/r/20250727082442.13182-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The simple thing would be to add the string as an assembly immediate
input operand. Some older gcc variants cannot handle strings as
immediate input operands for inline assemblies. Doing so may result in
compile errors.
Rewrite the s390 generic bug support very similar to arm64 and
loongarch, and get rid of all input operands to fix this.
[ peterz: backmerge fix and massage changelog ]
[ bp: clang integrated assembler concatenates only .ascii strings:
https://lore.kernel.org/r/202507020528.N0LtekXt-lkp@intel.com ]
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org> # Fixed the tags section
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-arch@vger.kernel.org
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: linux-s390@vger.kernel.org
Link: https://lore.kernel.org/r/20250520133927.7932C19-hca@linux.ibm.com
Link: https://lore.kernel.org/r/20250617135042.1878068-3-hca@linux.ibm.com
Pass in the condition string from __WARN_FLAGS(), but do not
concatenate it with __FILE__, because it results in s390
assembler build errors that are beyond my s390-asm-fu.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: linux-s390@vger.kernel.org
Cc: <linux-arch@vger.kernel.org>
Link: https://lore.kernel.org/r/20250515124644.2958810-11-mingo@kernel.org
The file Documentation/arch/powerpc/htm.rst is not included in the
index.rst toctree. This results in a warning when building the docs:
WARNING: document isn't included in any toctree: htm.rst
Add it to the index.rst file so that it is properly included in the
PowerPC documentation TOC.
Signed-off-by: Vishal Parmar <vishistriker@gmail.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250727110145.839906-1-vishistriker@gmail.com
Emails to alexandru.tachici@analog.com bounce permanently:
Remote Server returned '550 5.1.10 RESOLVER.ADR.RecipientNotFound; Recipient not found by SMTP address lookup'
so replace him with Cedric Encarnacion from Analog.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250724113735.59148-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add support for the Texas Instruments INA228 Ultra-Precise
Power/Energy/Charge Monitor.
The INA228 is very similar to the INA238 but offers four bits of extra
precision in the temperature, voltage and current measurement fields.
It also supports energy and charge monitoring, the latter of which is
not supported through this patch.
While it seems in the datasheet that some constants such as LSB values
differ between the 228 and the 238, they differ only for those registers
where four bits of precision have been added and they differ by a factor
of 16 (VBUS, VSHUNT, DIETEMP, CURRENT).
Therefore, the INA238 constants are still applicable with regard
to the bit of the same significance.
Signed-off-by: Jonas Rebmann <jre@pengutronix.de>
Link: https://lore.kernel.org/r/20250718-ina228-v2-3-227feb62f709@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Some purely cosmetic changes in ina238.c:
- When aligning definitions, do so consistently with tab stop of 8.
- Use spaces instead of tabs around operators.
- Align wrapped lines.
Signed-off-by: Jonas Rebmann <jre@pengutronix.de>
Link: https://lore.kernel.org/r/20250718-ina228-v2-1-227feb62f709@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
SMB1 already supports querying reparse points and detecting types of
symlink, fifo, socket, block and char.
This change implements the missing part - ability to create a new reparse
points over SMB1. This includes everything which SMB2+ already supports:
- native SMB symlinks and sockets
- NFS style of special files (symlinks, fifos, sockets, char/block devs)
- WSL style of special files (symlinks, fifos, sockets, char/block devs)
Attaching a reparse point to an existing file or directory is done via
SMB1 SMB_COM_NT_TRANSACT/NT_TRANSACT_IOCTL/FSCTL_SET_REPARSE_POINT command
and implemented in a new cifs_create_reparse_inode() function.
This change introduce a new callback ->create_reparse_inode() which creates
a new reperse point file or directory and returns inode. For SMB1 it is
provided via that new cifs_create_reparse_inode() function.
Existing reparse.c code was only slightly updated to call new protocol
callback ->create_reparse_inode() instead of hardcoded SMB2+ function.
This make the whole reparse.c code to work with every SMB dialect.
The original callback ->create_reparse_symlink() is not needed anymore as
the implementation of new create_reparse_symlink() function is dialect
agnostic too. So the link.c code was updated to call that function directly
(and not via callback).
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
WSL EAs are not required for native SMB symlinks, so do not query them from server.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
When not searching for child entries with msearch wildcard pattern then ask
server just for one output entry. There is no need to ask for more entries
as we are interested only for one search result, as we are doing query on
path.
CIFSFindFirst() with msearch=false is called by the cifs_query_path_info()
function.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
To query root path (without msearch wildcard) it is needed to
send pattern '\' instead of '' (empty string).
This allows to use CIFSFindFirst() to query information about root path
which is being used in followup changes.
This change fixes the stat() syscall called on the root path on the mount.
It is because stat() syscall uses the cifs_query_path_info() function and
it can fallback to the CIFSFindFirst() usage with msearch=false.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Some servers might enforce the SPN to be set in the target info
blob (AV pairs) when sending NTLMSSP_AUTH message. In Windows Server,
this could be enforced with SmbServerNameHardeningLevel set to 2.
Fix this by always appending SPN (cifs/<hostname>) to the existing
list of target infos when setting up NTLMv2 response blob.
Cc: linux-cifs@vger.kernel.org
Cc: David Howells <dhowells@redhat.com>
Reported-by: Pierguido Lambri <plambri@redhat.com>
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Zero-length AV pairs should be considered as valid target infos.
Don't skip the next AV pairs that follow them.
Cc: linux-cifs@vger.kernel.org
Cc: David Howells <dhowells@redhat.com>
Fixes: 0e8ae9b953 ("smb: client: parse av pair type 4 in CHALLENGE_MESSAGE")
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
The handlecache code today tracks the time at which dir lease was
acquired and the laundromat thread uses that to check for old
entries to cleanup.
However, if a directory is actively accessed, it should not
be chosen to expire first.
This change adds a new last_access_time field to cfid and
uses that to decide expiry of the cfid.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
cached_dir_lease_break() has return type as int but only
returning true or false. change return type of this function
to bool for clarity.
Signed-off-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
We now do a weighted selection of server interfaces when allocating
new channels. The weights are decided based on the speed advertised.
The fulfilled weight for an interface is a counter that is used to
track the interface selection. It should be reset back to zero once
all interfaces fulfilling their weight.
In cifs_chan_update_iface, this reset logic was missing. As a result
when the server interface list changes, the client may not be able
to find a new candidate for other channels after all interfaces have
been fulfilled.
Fixes: a6d8fb54a5 ("cifs: distribute channels across interfaces based on speed")
Cc: <stable@vger.kernel.org>
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
After commit 5c70eb5c59 ("net: better track kernel sockets lifetime"),
kernel sockets now use net_passive reference counting. However, commit
95d2b9f693 ("Revert "smb: client: fix TCP timers deadlock after rmmod"")
restored the manual socket refcount manipulation without adapting to this
new mechanism, causing a memory leak.
The issue can be reproduced by[1]:
1. Creating a network namespace
2. Mounting and Unmounting CIFS within the namespace
3. Deleting the namespace
Some memory leaks may appear after a period of time following step 3.
unreferenced object 0xffff9951419f6b00 (size 256):
comm "ip", pid 447, jiffies 4294692389 (age 14.730s)
hex dump (first 32 bytes):
1b 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 80 77 c2 44 51 99 ff ff .........w.DQ...
backtrace:
__kmem_cache_alloc_node+0x30e/0x3d0
__kmalloc+0x52/0x120
net_alloc_generic+0x1d/0x30
copy_net_ns+0x86/0x200
create_new_namespaces+0x117/0x300
unshare_nsproxy_namespaces+0x60/0xa0
ksys_unshare+0x148/0x360
__x64_sys_unshare+0x12/0x20
do_syscall_64+0x59/0x110
entry_SYSCALL_64_after_hwframe+0x78/0xe2
...
unreferenced object 0xffff9951442e7500 (size 32):
comm "mount.cifs", pid 475, jiffies 4294693782 (age 13.343s)
hex dump (first 32 bytes):
40 c5 38 46 51 99 ff ff 18 01 96 42 51 99 ff ff @.8FQ......BQ...
01 00 00 00 6f 00 c5 07 6f 00 d8 07 00 00 00 00 ....o...o.......
backtrace:
__kmem_cache_alloc_node+0x30e/0x3d0
kmalloc_trace+0x2a/0x90
ref_tracker_alloc+0x8e/0x1d0
sk_alloc+0x18c/0x1c0
inet_create+0xf1/0x370
__sock_create+0xd7/0x1e0
generic_ip_connect+0x1d4/0x5a0 [cifs]
cifs_get_tcp_session+0x5d0/0x8a0 [cifs]
cifs_mount_get_session+0x47/0x1b0 [cifs]
dfs_mount_share+0xfa/0xa10 [cifs]
cifs_mount+0x68/0x2b0 [cifs]
cifs_smb3_do_mount+0x10b/0x760 [cifs]
smb3_get_tree+0x112/0x2e0 [cifs]
vfs_get_tree+0x29/0xf0
path_mount+0x2d4/0xa00
__se_sys_mount+0x165/0x1d0
Root cause:
When creating kernel sockets, sk_alloc() calls net_passive_inc() for
sockets with sk_net_refcnt=0. The CIFS code manually converts kernel
sockets to user sockets by setting sk_net_refcnt=1, but doesn't call
the corresponding net_passive_dec(). This creates an imbalance in the
net_passive counter, which prevents the network namespace from being
destroyed when its last user reference is dropped. As a result, the
entire namespace and all its associated resources remain allocated.
Timeline of patches leading to this issue:
- commit ef7134c7fc ("smb: client: Fix use-after-free of network
namespace.") in v6.12 fixed the original netns UAF by manually
managing socket refcounts
- commit e9f2517a3e ("smb: client: fix TCP timers deadlock after
rmmod") in v6.13 attempted to use kernel sockets but introduced
TCP timer issues
- commit 5c70eb5c59 ("net: better track kernel sockets lifetime")
in v6.14-rc5 introduced the net_passive mechanism with
sk_net_refcnt_upgrade() for proper socket conversion
- commit 95d2b9f693 ("Revert "smb: client: fix TCP timers deadlock
after rmmod"") in v6.15-rc3 reverted to manual refcount management
without adapting to the new net_passive changes
Fix this by using sk_net_refcnt_upgrade() which properly handles the
net_passive counter when converting kernel sockets to user sockets.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=220343 [1]
Fixes: 95d2b9f693 ("Revert "smb: client: fix TCP timers deadlock after rmmod"")
Cc: stable@vger.kernel.org
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Wang Zhaolong <wangzhaolong@huaweicloud.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Use 'bool' type where it makes more sense than 'int'.
v2: Rebase due to corrected 'fbcon_cursor_blink' initial value
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Make the code more legible by adding get_{fg,bg}_color()
which hide the obscure 'is_fg' parameter of get_color()
from the caller.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Helge Deller <deller@gmx.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Invert fbcon_is_inactive() into fbcon_is_active(). Much easier
on the poor brain when you don't have to do dobule negations
all over the place.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Helge Deller <deller@gmx.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Invert fbcon_cursor_noblink into fbcon_cursor_blink so that:
- it matches the sysfs attribute exactly
- avoids having to do these NOT operations all over the place
- use bool instead of int
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Seems like someone hit 'c' when they meant to hit 'd'.
Signed-off-by: Daniel Palmer <daniel.palmer@sony.com>
Signed-off-by: Helge Deller <deller@gmx.de>
fb_add_videomode() can fail with -ENOMEM when its internal kmalloc() cannot
allocate a struct fb_modelist. If that happens, the modelist stays empty but
the driver continues to register. Add a check for its return value to prevent
poteintial null-ptr-deref, which is similar to the commit 17186f1f90 ("fbdev:
Fix do_register_framebuffer to prevent null-ptr-deref in fb_videomode_to_var").
Fixes: 1b6c79361b ("video: imxfb: Add DT support")
Signed-off-by: Chenyuan Yang <chenyuan0y@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
This patch addresses various coding style issues in `svgalib.c` to improve
readability and better align the code with the Linux kernel's formatting
standards.
The changes primarily consist of:
- Adjusting whitespace around operators and after keywords.
- Standardizing brace placement for control flow statements.
- Removing unnecessary braces on single-statement if/else blocks.
- Deleting extraneous blank lines throughout the file.
These changes are purely stylistic and introduce no functional modifications.
Signed-off-by: Darshan R. <rathod.darshan.0896@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
