Ignore the low btemp interrupts for ab8500 3.0 and 3.3
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Hakan Berg <hakan.berg@stericsson.com>
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
Tested-by: Marcus COOPER <marcus.xm.cooper@stericsson.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
The Linux Power Supply framework expects battery temperatures to have
a resolution of 0.1 degree Celsius; however, the AB8500 btemp driver
supplies a battery temperature resolution of 1 degree Celsius. We
therefore have to use a factor 10 on the measured values.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
In case of time out error IRQ needs to be disabled
otherwise we will get unbalanced enable/disable pairs.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Rickard Andersson <rickard.andersson@stericsson.com>
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
Today the battery recharge is determined with a voltage threshold. This
voltage threshold is only valid when the battery is relaxed. In charging
algorithm the voltage read is the loaded battery voltage and no
compensation is done to get the relaxed voltage. When maintenance
charging is not selected, this makes the recharging condition to almost
immediately activate when there is a discharge present on the battery.
Depending on which vendor the battery comes from this behavior can wear
out the battery much faster than normal.
The fuelgauge driver is responsible to monitor the actual battery
capacity and is able to estimate the remaining capacity. It is better to
use the remaining capacity as a limit to determine when battery should
be recharged.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Marcus Cooper <marcus.xm.cooper@stericsson.com>
Reviewed-by: Hakan BERG <hakan.berg@stericsson.com>
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
Gracefully handle gpadc conversion errors.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Reviewed-by: Johan BJORNSTEDT <johan.bjornstedt@stericsson.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
Doing so provides a greater degree of accuracy when dealing with
time-frames between 1us and 20ms. msleep() is only accurate for
wake-ups greater than 20ms.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jonas ABERG <jonas.aberg@stericsson.com>
Reviewed-by: Johan BJORNSTEDT <johan.bjornstedt@stericsson.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
Add two new work queues to provide USB and AC charger disconnect
detection.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
When enabling the CCEOC irq we might get false interrupt
from ab8500-driver due to the latched value will be saved
and interpreted as an IRQ when enabled
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Johan Bjornstedt <johan.bjornstedt@stericsson.com>
Signed-off-by: Henrik Solver <henrik.solver@stericsson.com>
Reviewed-by: Karl KOMIEROWSKI <karl.komierowski@stericsson.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
Rename the ab8500_power_loss_handling function to a more
descriptive name ab8500_enable_disable_sw_fallback
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Robert Marklund <robert.marklund@stericsson.com>
Reviewed-by: Par-Olof HAKANSSON <par-olof.hakansson@stericsson.com>
Reviewed-by: Karl KOMIEROWSKI <karl.komierowski@stericsson.com>
Tested-by: Par-Olof HAKANSSON <par-olof.hakansson@stericsson.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
Fix the following warnings when building with W=1 option:
drivers/clk/mxs/clk-imx23.c: In function 'mx23_clocks_init':
drivers/clk/mxs/clk-imx23.c:149:16: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
drivers/clk/mxs/clk-imx23.c:165:16: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
...
drivers/clk/mxs/clk-imx28.c: In function 'mx28_clocks_init':
drivers/clk/mxs/clk-imx28.c:227:16: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
drivers/clk/mxs/clk-imx28.c:244:16: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
The clk_lookup entry is dropped at remove time by a call to
clkdev_drop(). That function frees the entry, which is also freed by the
driver core as it has been allocated through devm_kzalloc(). This
results in a double free.
Use kzalloc() instead of devm_kzalloc() to fix this.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
The symbol of_fixed_clk_setup is exported and annotated __init.
This looks like section mismatch.
Fix this by removing the __init annotation of of_fixed_clk_setup.
Signed-off-by: Denis Efremov <yefremov.denis@gmail.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
This patch adds support for the new PLL module found in WM8750 and
WM8850 SoCs.
Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
A request to vt8500_dclk_(round_rate/set_rate) with rate=0 results
in a division-by-0 in the kernel.
Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
When calculating device clock divisor values in set_rate and
round_rate, we do a simple integer divide. If parent_rate / rate
has a fraction, this is dropped which results in the device clock
being set too high.
This patch corrects the problem by adding 1 to the calculated
divisor if the division would have had a decimal result.
Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
When a PLL frequency calculation is performed and a non-exact match
is found the wrong multiplier and divisors are returned.
Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
container_of() never returns NULL, thus remove the NULL checking for it.
Also rename get_max77686_clk() to to_max77686_clk() for better readability.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Now we have Load/Save buttons to do the Load/Save
in the convenient place, so we can drop the
top-level entries.
Signed-off-by: Wang YanQing <udknight@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
If menuconfig have Save/Load button like alternative
.config editors, xconfig, nconfig, etc.We will have
a obvious benefit when use menuconfig just like
when we use others, we can Save/Load our .config quickly
and conveniently.
This patch add the Save/Load button for menuconfig.
[remove trailing space while at it for below line:
"*) Formerly when I used Page Down and Page Up, the cursor would be set"
]
Changes:
V1-V2:
1:use PATH_MAX instead of hard code suggested by Yann E. MORIN
2:drop the spurious empty-line removal suggested by Yann E. MORIN
V2-V3:
1:ajust buttons position well centered reported by Yann E. MORIN
Signed-off-by: Wang YanQing <udknight@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
This patch adds basic DT bindings for OMAP GPMC.
The actual peripherals are instantiated from child nodes within the GPMC
node, and the only type of device that is currently supported is NAND.
Code was added to parse the generic GPMC timing parameters and some
documentation with examples on how to use them.
Successfully tested on an AM33xx board.
Signed-off-by: Daniel Mack <zonque@gmail.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
[tony@atomide.com: updated to apply]
Signed-off-by: Tony Lindgren <tony@atomide.com>
The am33xx is capable of handling bch error correction modes, so
enable that feature in the driver.
Signed-off-by: Daniel Mack <zonque@gmail.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Tony Lindgren <tony@atomide.com>
gpmc_nand_init() will be called from another driver's probe() function,
so the easiest way to prevent section mismatches is to drop the
annotation here.
Signed-off-by: Daniel Mack <zonque@gmail.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Since there is now a mapping of granted pages in kernel address space in
both PV and HVM, use it for UNMAP_NOTIFY_CLEAR_BYTE instead of accessing
memory via copy_to_user and triggering sleep-in-atomic warnings.
Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
If gntdev_ioctl_unmap_grant_ref is called on a range before unmapping
it, the entry is removed from priv->maps and the later call to
mn_invl_range_start won't find it to do the unmapping. Fix this by
creating another list of freeable maps that the mmu notifier can search
and use to unmap grants.
Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
In gntdev_ioctl_get_offset_for_vaddr, we need to hold mmap_sem while
calling find_vma() to avoid potentially having the result freed out from
under us. Similarly, the MMU notifier functions need to synchronize with
gntdev_vma_close to avoid map->vma being freed during their iteration.
Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
1. If any individual mapping error happens, the V1 case will mark *all*
operations as failed. Fixed.
2. The err_array was allocated with kcalloc, resulting in potentially O(n) page
allocations. Refactor code to not use this array.
Signed-off-by: Andres Lagar-Cavilla <andres@lagarcavilla.org>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)
iQEcBAABAgAGBQJQxqj1AAoJEHm+PkMAQRiG9MQH/j21UwP2QGpdpXbWAnFMjtlv
uE/yCFhPoqR1QjjE6oRlO6MHFA41xGDbr5RQki9Ik2AfSYiastt4ZWYvtSJKVTCr
O0Lj+Cdt/2qBkGiARHqVEBZ4S/l/cw4/EHPb5StFyu3ggnPPQhoPIP7oAmRn0+mh
NNb5CEcJOLqIaJSteqMP71Q899ncbLayBnimYCaC2f6r00beqNXIqxSHipcPlUsf
ehNxqCX+5z5Q788EL33EL8GpBcy4Ueevu6nvnuVI8qIEnBnrBVngsiaQ4Hti+2eK
A//4DYoF2N1wLjQv7hFeiwMURQ16OlxXoc/Z66sv2QQRwPxOIQlxdhWuey4KebA=
=7LYr
-----END PGP SIGNATURE-----
Merge tag 'v3.7' into stable/for-linus-3.8
Linux 3.7
* tag 'v3.7': (833 commits)
Linux 3.7
Input: matrix-keymap - provide proper module license
Revert "revert "Revert "mm: remove __GFP_NO_KSWAPD""" and associated damage
ipv4: ip_check_defrag must not modify skb before unsharing
Revert "mm: avoid waking kswapd for THP allocations when compaction is deferred or contended"
inet_diag: validate port comparison byte code to prevent unsafe reads
inet_diag: avoid unsafe and nonsensical prefix matches in inet_diag_bc_run()
inet_diag: validate byte code to prevent oops in inet_diag_bc_run()
inet_diag: fix oops for IPv4 AF_INET6 TCP SYN-RECV state
mm: vmscan: fix inappropriate zone congestion clearing
vfs: fix O_DIRECT read past end of block device
net: gro: fix possible panic in skb_gro_receive()
tcp: bug fix Fast Open client retransmission
tmpfs: fix shared mempolicy leak
mm: vmscan: do not keep kswapd looping forever due to individual uncompactable zones
mm: compaction: validate pfn range passed to isolate_freepages_block
mmc: sh-mmcif: avoid oops on spurious interrupts (second try)
Revert misapplied "mmc: sh-mmcif: avoid oops on spurious interrupts"
mmc: sdhci-s3c: fix missing clock for gpio card-detect
lib/Makefile: Fix oid_registry build dependency
...
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Conflicts:
arch/arm/xen/enlighten.c
drivers/xen/Makefile
[We need to have the v3.7 base as the 'for-3.8' was based off v3.7-rc3
and there are some patches in v3.7-rc6 that we to have in our branch]
At the same time reduce the local buffers to 16 bytes each.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Commit 85ff6acb07 (xen/granttable: Grant
tables V2 implementation) changed the GREFS_PER_GRANT_FRAME macro from
a constant to a conditional expression. The expression depends on
grant_table_version being appropriately set. Unfortunately, at init
time grant_table_version will be 0. The GREFS_PER_GRANT_FRAME
conditional expression checks for "grant_table_version == 1", and
therefore returns the number of grant references per frame for v2.
This causes gnttab_init() to allocate fewer pages for gnttab_list, as
a frame can old half the number of v2 entries than v1 entries. After
gnttab_resume() is called, grant_table_version is appropriately
set. nr_init_grefs will then be miscalculated and gnttab_free_count
will hold a value larger than the actual number of free gref entries.
If a guest is heavily utilizing improperly initialized v1 grant
tables, memory corruption can occur. One common manifestation is
corruption of the vmalloc list, resulting in a poisoned pointer
derefrence when accessing /proc/meminfo or /proc/vmallocinfo:
[ 40.770064] BUG: unable to handle kernel paging request at 0000200200001407
[ 40.770083] IP: [<ffffffff811a6fb0>] get_vmalloc_info+0x70/0x110
[ 40.770102] PGD 0
[ 40.770107] Oops: 0000 [#1] SMP
[ 40.770114] CPU 10
This patch introduces a static variable, grefs_per_grant_frame, to
cache the calculated value. gnttab_init() now calls
gnttab_request_version() early so that grant_table_version and
grefs_per_grant_frame can be appropriately set. A few BUG_ON()s have
been added to prevent this type of bug from reoccurring in the future.
Signed-off-by: Matt Wilson <msw@amazon.com>
Reviewed-and-Tested-by: Steven Noonan <snoonan@amazon.com>
Acked-by: Ian Campbell <Ian.Campbell@citrix.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Annie Li <annie.li@oracle.com>
Cc: xen-devel@lists.xen.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org # v3.3 and newer
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Since submit 621b4d6 the bnx2x driver support FW GRO.
However, when using the device with GRO enabled in bridging
scenarios throughput is very low, as the bridge expects all
incoming packets to be passed with CHECKSUM_PARTIAL -
a demand which is satisfied by the SW GRO implementation,
but was missed in the bnx2x driver implementation (which returned
CHECKSUM_UNNECESSARY).
Now, given that the traffic is supported by FW GRO (TCP/IP),
the bnx2x driver calculates the pseudo checksum by itself,
passing skbs with CHECKSUM_PARTIAL and giving a much better
throughput when receiving GRO traffic.
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When enabling interrupts, acknowledge the interrupt only
after configuring the IGU to the correct interrupt mode
(otherwise it would dirty selftests)
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Get better control over interrupts during panic, and allow FW to
test outgoing Tx packets when stop-on-error is allowed.
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This revises and enhances the bnx2x register dump facilities,
adding support for `ethtool -w' on top of `ethtool -d'.
Signed-off-by: Miriam Shitrit <miris@broadcom.com>
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a device is configured to act as either iscsi or fcoe
device in its nvram, prevent the other from being misused by
preventing its activation in the driver.
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
On rare occasions, self test link may fail since the link is
being sampled while it's still being stabilized.
To correct this behaviour, try to sample the link for 2 seconds
prior to declaring a failure.
Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Current logic causes chips running in switch dependent multi-function
FCoE mode not to configure their MAC, leading to an all 0s MAC.
This patch configures the interface with the SAN Mac instead.
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Self-tests following boot from SAN have failed as the
UNDI driver might leave some NIG interrupt indications.
This patch does the clean-up, clearing those indications
and allowing the test to pass.
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Conflicts:
Documentation/networking/ip-sysctl.txt
drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
Both conflicts were simply overlapping context.
A build fix for qlcnic is in here too, simply removing the added
devinit annotations which no longer exist.
Signed-off-by: David S. Miller <davem@davemloft.net>
The .dtsi now names all PSC nodes as "psc", so this ac97
check won't work. Check for ac97 PSC using compatible
property.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
This patch converts arch-vt8500 to make use of CLKSRC_OF. Doing so
removes the need for include/linux/vt8500_timer.h as vt8500_timer_init
no longer needs to be visible outside vt8500_timer.c
Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
