Commit graph

361,021 commits

Author SHA1 Message Date
Mika Kuoppala
498d2ac15c drm/i915: Add intel_ring_handle_seqno wrap
If there are pre-wrap values in semaphore-mbox registers after wrap,
syncing against some after-wrap request will complete immediately.
Fix this by emitting ring commands to set mbox registers to zero
when the wrap happens.

v2: Use __intel_ring_begin to emit ring commands, from
Chris Wilson.

Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
[danvet: Add a small comment to handle_seqno_wrap.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-12-06 13:14:34 +01:00
Mika Kuoppala
cbcc80dff3 drm/i915: Split intel_ring_begin
In preparation for handling ring seqno wrapping, split
intel_ring_begin into helper part which doesn't allocate
seqno.

Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-12-06 13:14:34 +01:00
Lars Ellenberg
d2ec180c23 drbd: update Kconfig to match current dependencies
We no longer need the connector.
But we need libcrc32c.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-12-06 13:08:29 +01:00
Philipp Reisner
ef86b77957 drbd: Fix drbdsetup wait-connect, wait-sync etc... commands
This was introduces when moving the code over from the 8.3 codebase
with commit 328e0f125b

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-12-06 13:04:34 +01:00
Philipp Reisner
13c76aba78 drbd: close race between drbd_set_role and drbd_connect
drbd_set_role(, R_PRIMARY, ) does the state change to Primary,
some more housekeeping, and possibly generates a new UUID set.

All of this holding the "state_mutex".

The connection handshake involves sending of various state information,
including the current data generation UUID set, and two connection
state changes from C_WF_CONNECTION to C_WF_REPORT_PARAMS further to
a number of different outcomes, resync being one of them.

If the connection handshake happens between the state change to Primary
and the generation of the new UUIDs, the resync decision based on the
old UUID set may be confused, depending on circumstances.

Make sure that, before we do the handshake, any promotion to Primary
role will either be complete (including the housekeeping stuff), or can
see, and serialize with, the ongoing handshake, based on the
"STATE_SENT" bit, which is set when we start the handshake, and cleared
only when we leave C_WF_REPORT_PARAMS again.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-12-06 13:00:33 +01:00
Lars Ellenberg
691631c065 drbd: respect no-md-barriers setting also when changed online via disk-options
We need to propagate the configuration into the flag bits,
or it won't be effective.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-12-06 13:00:04 +01:00
Philipp Reisner
298307ed1d drbd: Remove obsolete check
Smatch complained about it this redundanct check.

The check was introduced in 2006-09-13. On 2007-07-24 the body of the
function was enclosed by get_ldev()/put_ldev() reference counting.
Since then the check is useless and miss leading.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-12-06 12:09:55 +01:00
Yacine Belkadi
9a52aeeb92 scripts/kernel-doc: check that non-void fcts describe their return value
If a function has a return value, but its kernel-doc comment doesn't contain a
"Return" section, then emit the following warning:

   Warning(file.h:129): No description found for return value of 'fct'

Note: This check emits a lot of warnings at the moment, because many functions
don't have a 'Return' doc section. So until the number of warnings goes
sufficiently down, the check is only performed in verbose mode.

Signed-off-by: Yacine Belkadi <yacine.belkadi.1@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2012-12-06 11:49:28 +01:00
Yacine Belkadi
ddf5eabd20 Kernel-doc: Convention: Use a "Return" section to describe return values
Non-void functions should describe their return values in their kernel-doc
comments. Currently, some don't, others do in various forms. For example:
   * Return the result.
   * Return: The result.
   * Returns the result.
   * Returns: the result.
   * Return Value: The result.
   * @return: the result.
   * This function returns the result.
   * It will return the result.

Defining a convention would improve consistency of kernel-doc comments. It
would also help scripts/kernel-doc identify the text describing the return
value of a function. Thus allowing additional checks on the comments, and
suitable highlighting in the generated docs (man pages, html, etc).

So, as a convention, use a section named "Return" to describe the return
value of a function.

Signed-off-by: Yacine Belkadi <yacine.belkadi.1@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2012-12-06 11:40:25 +01:00
Yann E. MORIN
169dfd880a Revert "kconfig-language: add to hints"
This reverts commit 64b81ed7fb.

As Martin says about this paragraph:
    However, I can not reproduce this. The attached file contains both
    cases. [...] AFAICS, both versions behave equivalently. I suggest
    changing the documentation accordingly.

    [in http://marc.info/?l=linux-kbuild&m=134987006202410&w=2]

Reported-by: Martin Walch <walch.martin@gmx.de>
Cc: Martin Walch <walch.martin@gmx.de>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2012-12-06 11:34:55 +01:00
Jiri Kosina
9afd09a1db HID: i2c-hid: fix ret_count check
ret_count has to be at least 3, as we have to count the 2 bytes that are used
for the size of the reply. Without this, memcpy() might be called with zero or
negative count.

Reported-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-12-06 10:59:28 +01:00
Benjamin Tissoires
e5b50fe7be HID: i2c-hid: fix i2c_hid_get_raw_report count mismatches
The previous memcpy implementation relied on the size advertized by the
device. There were no guarantees that buf was big enough.

Some gymnastic is also required with the +2/-2 to take into account
the first 2 bytes of the returned buffer where the total returned
length is supplied by the device.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-12-06 10:58:42 +01:00
Benjamin Tissoires
8a1bbb5319 HID: i2c-hid: remove extra .irq field in struct i2c_hid
There is no point in keeping the irq in i2c_hid as it's already
there in client.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Reviewed-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-12-06 10:56:37 +01:00
Benjamin Tissoires
29b45787d1 HID: i2c-hid: reorder allocation/free of buffers
Simplifies i2c_hid_alloc_buffers tests, and makes this function
responsible of the assignment of ihid->bufsize.
The condition for the reallocation in i2c_hid_start is then simpler.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Reviewed-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-12-06 10:55:15 +01:00
Benjamin Tissoires
27174cff8f HID: i2c-hid: fix memory corruption due to missing hid declaration
HID descriptors contains 4 bytes of reserved field.
The previous implementation was overriding the next fields in struct i2c_hid.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Reviewed-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-12-06 10:54:26 +01:00
Grant Likely
f67605394f devicetree/bindings: Move gpio-leds binding into leds directory
Merely reorganizing documentation. No functional changes. It makes more
sense for the gpio-leds binding to be grouped with other led bindings
than with gpio drivers.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-12-06 09:53:13 +00:00
Nadia Yvette Chambers
6d49e352ae propagate name change to comments in kernel source
I've legally changed my name with New York State, the US Social Security
Administration, et al. This patch propagates the name change and change
in initials and login to comments in the kernel source as well.

Signed-off-by: Nadia Yvette Chambers <nyc@holomorphy.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-12-06 10:39:54 +01:00
Vakul Garg
a2c0911c09 crypto: caam - Updated SEC-4.0 device tree binding for ERA information.
The compatible property in device tree "crypto" node has been enhanced
to provide SEC ERA information to the applications.

Signed-off-by: Vakul Garg <vakul@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-12-06 17:16:30 +08:00
Mathias Krause
f0ef105915 crypto: testmgr - remove superfluous initializers for xts(aes)
The test vectors for 'xts(aes)' contain superfluous initializers.
Remove them.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-12-06 17:16:29 +08:00
Milan Broz
0818904d40 crypto: testmgr - allow compression algs in fips mode
When in fips mode, compression algoritms fails to initialize,
e.g. modprobe ubifs returns
  UBIFS error: compr_init: cannot initialize compressor lzo, error -2

FIPS mode should not care about compression algoritms at all.

Patch just set fips_enabled flag to 1 to all compression algorithms
managed by testmgr.

Signed-off-by: Milan Broz <mbroz@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-12-06 17:16:28 +08:00
Jussi Kivilinna
6726ec4268 crypto: testmgr - add larger crc32c test vector to test FPU path in crc32c_intel
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-12-06 17:16:28 +08:00
Jussi Kivilinna
f56349bdd6 crypto: testmgr - clean alg_test_null entries in alg_test_descs[]
Currently alg_test_null entries set .suite values to zero, which is unneeded.
So perform clean-up of null test entries.

Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-12-06 17:16:27 +08:00
Jussi Kivilinna
4e84c1792d crypto: testmgr - remove fips_allowed flag from camellia-aesni null-tests
Remove incorrect fips_allowed from camellia null-test entries. Caused by
incorrect copy-paste of aes-aesni null-tests into camellia-aesni null-tests.

Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-12-06 17:16:27 +08:00
Jussi Kivilinna
044ab52578 crypto: cast5/cast6 - move lookup tables to shared module
CAST5 and CAST6 both use same lookup tables, which can be moved shared module
'cast_common'.

Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-12-06 17:16:26 +08:00
Shan Wei
f0fcf2002b padata: use __this_cpu_read per-cpu helper
For bottom halves off, __this_cpu_read is better.

Signed-off-by: Shan Wei <davidshan@tencent.com>
Reviewed-by: Christoph Lameter <cl@linux.com>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-12-06 17:16:23 +08:00
Mark Brown
09871a942a ASoC: arizona: Make FLL lock timeout very high
Provide robustness against low quality FLL sync clocks by increasing the
timeout for lock to an absurdly high point; we should never get anywhere
near hitting the timeout in a real system unless it is failing.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-06 16:52:36 +09:00
Alban Bedel
8fc6d09dcb pwm: lpc32xx: Set the chip base for dynamic allocation
Doing so allows the base to be allocated dynamically at runtime and
makes it easier for the chip to coexist with other PWM chips.

Signed-off-by: Alban Bedel <alban.bedel@avionic-design.de>
Acked-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com>
Acked-by: Roland Stigge <stigge@antcom.de>
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-12-06 08:52:13 +01:00
Alban Bedel
54b2a999a1 pwm: lpc32xx: Properly disable the clock on device removal
A single clock is used for all PWMs meaning the clock's reference count
might be between 0 and N when .remove() is called. Instead of a single
clk_disable() call pwm_disable() on each PWM, to ensure that
clk_disable() is called for each PWM that is still enabled.

Signed-off-by: Alban Bedel <alban.bedel@avionic-design.de>
Acked-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com>
Acked-by: Roland Stigge <stigge@antcom.de>
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-12-06 08:52:11 +01:00
Alban Bedel
a9a18e0691 pwm: lpc32xx: Fix the PWM polarity
The duty cycles value goes from 1 (99% HIGH) to 256 (0% HIGH) but it
is stored modulo 256 in the register as it is only 8 bits wide.

Signed-off-by: Alban Bedel <alban.bedel@avionic-design.de>
Acked-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com>
Acked-by: Roland Stigge <stigge@antcom.de>
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-12-06 08:52:07 +01:00
Lothar Waßmann
983290b062 pwm: i.MX: eliminate build warning
compiling the i.MX pwm driver produces the following warning:
|drivers/pwm/pwm-imx.c: In function 'imx_pwm_probe':
|drivers/pwm/pwm-imx.c:281:7: warning: assignment discards qualifiers from pointer target type

Apply a 'const' attribute to the affected variable declaration.

Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-12-06 08:52:04 +01:00
Thierry Reding
417328c3f7 pwm: Export of_pwm_xlate_with_flags()
Drivers may want to use this function if they support any of the flags
that can be passed via a third cell in the DT specifier. Since those
drivers may be built as modules the symbol needs to be exported to make
sure that it can be accessed.

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-12-06 08:51:38 +01:00
Xiao Guangrong
c219346325 KVM: MMU: optimize for set_spte
There are two cases we need to adjust page size in set_spte:
1): the one is other vcpu creates new sp in the window between mapping_level()
    and acquiring mmu-lock.
2): the another case is the new sp is created by itself (page-fault path) when
    guest uses the target gfn as its page table.

In current code, set_spte drop the spte and emulate the access for these case,
it works not good:
- for the case 1, it may destroy the mapping established by other vcpu, and
  do expensive instruction emulation.
- for the case 2, it may emulate the access even if the guest is accessing
  the page which not used as page table. There is a example, 0~2M is used as
  huge page in guest, in this huge page, only page 3 used as page table, then
  guest read/writes on other pages can cause instruction emulation.

Both of these cases can be fixed by allowing guest to retry the access, it
will refault, then we can establish the mapping by using small page

Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Acked-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
2012-12-06 09:11:25 +02:00
Tim Gardner
527897ccd9 lib/Makefile: Fix oid_registry build dependency
It is $(obj)/oid_registry.o that is dependent on $(obj)/oid_registry_data.c.
The object file cannot be built until $(obj)/oid_registry_data.c has been
generated.

A periodic and hard to reproduce parallel build failure is due to
this incorrect lib/Makefile dependency. The compile error is completely
disingenuous.

  GEN     lib/oid_registry_data.c
Compiling 49 OIDs
  CC      lib/oid_registry.o
gcc: error: lib/oid_registry.c: No such file or directory
gcc: fatal error: no input files
compilation terminated.
make[3]: *** [lib/oid_registry.o] Error 4

Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: David Howells <dhowells@redhat.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-12-06 17:25:01 +10:30
Axel Lin
ec4f7b88b4 regulator: gpio-regulator: Add ifdef CONFIG_OF guard for regulator_gpio_of_match
Use of_match_ptr and add ifdef CONFIG_OF guard for regulator_gpio_of_match.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-06 15:22:52 +09:00
Axel Lin
bdc4baaceb regulator: palmas: Convert palmas_ops_smps to regulator_[get|set]_voltage_sel_regmap
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-06 15:20:53 +09:00
Axel Lin
ad02e84687 regulator: palmas: Return raw register values as the selectors in [get|set]_voltage_sel
Don't adjust the selector in [get|set]_voltage_sel, fix it in list_voltage() instead.

For smps*(except smps10), the vsel reg-value and voltage mapping as below:

reg-value       volt (uV) ( Assume RANGE is x1 )
0               0
1               500000
2               500000
3               500000
4               500000
5               500000
6               500000 (0.49V + 1 * 0.01V) * RANGE
7               510000 (0.49V + 2 * 0.01V) * RANGE
8               520000 (0.49V + 3 * 0.01V) * RANGE
9               530000 (0.49V + 4 * 0.01V) * RANGE
....

The linear mapping is start from selector 6.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-06 15:20:52 +09:00
Marek Szyprowski
d1e7de3007 regulators: add regulator_can_change_voltage() function
Introduce a regulator_can_change_voltage() function for the subsytems or
drivers which might check if applying voltage change is possible and use
special workaround code when the driver is used with fixed regulators or
regulators with disabled ability to change the voltage.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-06 15:13:34 +09:00
Mark Brown
cbc1938bad regmap: Cache register and value sizes for debugfs
No point in calculating them every time.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-06 15:10:21 +09:00
Dave Airlie
8de9e41775 Merge branch 'connector-to-object-prop' of git://github.com/robclark/kernel-omap4 into drm-next
* 'connector-to-object-prop' of git://github.com/robclark/kernel-omap4:
  drm: remove legacy drm_connector_property fxns
  drm/nouveau: drm_connector_property -> drm_object_property
  drm/i915: One more drm_connector_property -> drm_object_property
  drm/i2c: drm_connector_property -> drm_object_property
  drm/vmwgfx: drm_connector_property -> drm_object_property
  drm/udl: drm_connector_property -> drm_object_property
  drm/shmob: drm_connector_property -> drm_object_property
  drm/radeon: drm_connector_property -> drm_object_property
  drm/gma500: drm_connector_property -> drm_object_property
2012-12-06 14:08:09 +10:00
Cong Wang
b93196dc5a net: fix some compiler warning in net/core/neighbour.c
net/core/neighbour.c:65:12: warning: 'zero' defined but not used [-Wunused-variable]
net/core/neighbour.c:66:12: warning: 'unres_qlen_max' defined but not used [-Wunused-variable]

These variables are only used when CONFIG_SYSCTL is defined,
so move them under #ifdef CONFIG_SYSCTL.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Cong Wang <amwang@redhat.com>
Acked-by: Shan Wei <davidshan@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-05 21:50:37 -05:00
David Woodhouse
cf66bb93e0 byteorder: allow arch to opt to use GCC intrinsics for byteswapping
Since GCC 4.4, there have been __builtin_bswap32() and __builtin_bswap16()
intrinsics. A __builtin_bswap16() came a little later (4.6 for PowerPC,
48 for other platforms).

By using these instead of the inline assembler that most architectures
have in their __arch_swabXX() macros, we let the compiler see what's
actually happening. The resulting code should be at least as good, and
much *better* in the cases where it can be combined with a nearby load
or store, using a load-and-byteswap or store-and-byteswap instruction
(e.g. lwbrx/stwbrx on PowerPC, movbe on Atom).

When GCC is sufficiently recent *and* the architecture opts in to using
the intrinsics by setting CONFIG_ARCH_USE_BUILTIN_BSWAP, they will be
used in preference to the __arch_swabXX() macros. An architecture which
does not set ARCH_USE_BUILTIN_BSWAP will continue to use its own
hand-crafted macros.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
2012-12-06 01:22:31 +00:00
Mihai Caraman
352df1deb2 KVM: PPC: booke: Get/set guest EPCR register using ONE_REG interface
Implement ONE_REG interface for EPCR register adding KVM_REG_PPC_EPCR to
the list of ONE_REG PPC supported registers.

Signed-off-by: Mihai Caraman <mihai.caraman@freescale.com>
[agraf: remove HV dependency, use get/put_user]
Signed-off-by: Alexander Graf <agraf@suse.de>
2012-12-06 01:34:20 +01:00
Mihai Caraman
38f988240c KVM: PPC: bookehv: Add EPCR support in mtspr/mfspr emulation
Add EPCR support in booke mtspr/mfspr emulation. EPCR register is defined only
for 64-bit and HV categories, we will expose it at this point only to 64-bit
virtual processors running on 64-bit HV hosts.
Define a reusable setter function for vcpu's EPCR.

Signed-off-by: Mihai Caraman <mihai.caraman@freescale.com>
[agraf: move HV dependency in the code]
Signed-off-by: Alexander Graf <agraf@suse.de>
2012-12-06 01:34:19 +01:00
Mihai Caraman
95e90b43c9 KVM: PPC: bookehv: Add guest computation mode for irq delivery
When delivering guest IRQs, update MSR computation mode according to guest
interrupt computation mode found in EPCR.

Signed-off-by: Mihai Caraman <mihai.caraman@freescale.com>
[agraf: remove HV dependency in the code]
Signed-off-by: Alexander Graf <agraf@suse.de>
2012-12-06 01:34:18 +01:00
Alexander Graf
62b4db0042 KVM: PPC: Make EPCR a valid field for booke64 and bookehv
In BookE, EPCR is defined and valid when either the HV or the 64bit
category are implemented. Reflect this in the field definition.

Today the only KVM target on 64bit is HV enabled, so there is no
change in actual source code, but this keeps the code closer to the
spec and doesn't build up artificial road blocks for a PR KVM
on 64bit.

Signed-off-by: Alexander Graf <agraf@suse.de>
2012-12-06 01:34:17 +01:00
Mihai Caraman
e9666ea1b3 KVM: PPC: booke: Extend MAS2 EPN mask for 64-bit
Extend MAS2 EPN mask to retain most significant bits on 64-bit hosts.
Use this mask in tlb effective address accessor.

Signed-off-by: Mihai Caraman <mihai.caraman@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2012-12-06 01:34:15 +01:00
Mihai Caraman
9e2fa64693 KVM: PPC: e500: Mask MAS2 EPN high 32-bits in 32/64 tlbwe emulation
Mask high 32 bits of MAS2's effective page number in tlbwe emulation for guests
running in 32-bit mode.

Signed-off-by: Mihai Caraman <mihai.caraman@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2012-12-06 01:34:14 +01:00
Mihai Caraman
8823a8fd0d KVM: PPC: Mask ea's high 32-bits in 32/64 instr emulation
Mask high 32 bits of effective address in emulation layer for guests running
in 32-bit mode.

Signed-off-by: Mihai Caraman <mihai.caraman@freescale.com>
[agraf: fix indent]
Signed-off-by: Alexander Graf <agraf@suse.de>
2012-12-06 01:34:13 +01:00
Mihai Caraman
7cdd7a95c6 KVM: PPC: e500: Add emulation helper for getting instruction ea
Add emulation helper for getting instruction ea and refactor tlb instruction
emulation to use it.

Signed-off-by: Mihai Caraman <mihai.caraman@freescale.com>
[agraf: keep rt variable around]
Signed-off-by: Alexander Graf <agraf@suse.de>
2012-12-06 01:34:12 +01:00
Mihai Caraman
e51f8f32d6 KVM: PPC: bookehv64: Add support for interrupt handling
Add interrupt handling support for 64-bit bookehv hosts. Unify 32 and 64 bit
implementations using a common stack layout and a common execution flow starting
from kvm_handler_common macro. Update documentation for 64-bit input register
values. This patch only address the bolted TLB miss exception handlers version.

Signed-off-by: Mihai Caraman <mihai.caraman@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2012-12-06 01:34:11 +01:00