Commit graph

361,021 commits

Author SHA1 Message Date
Rémi Cardona
6823627b93 [media] dw2102: Declare MODULE_FIRMWARE usage
Signed-off-by: Rémi Cardona <remi.cardona@smartjog.com>
Reviewed-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-12-04 14:42:09 -02:00
Linus Torvalds
57302e0ddf vfs: avoid "attempt to access beyond end of device" warnings
The block device access simplification that avoided accessing the (racy)
block size information (commit bbec0270bd: "blkdev_max_block: make
private to fs/buffer.c") no longer checks the maximum block size in the
block mapping path.

That was _almost_ as simple as just removing the code entirely, because
the readers and writers all check the size of the device anyway, so
under normal circumstances it "just worked".

However, the block size may be such that the end of the device may
straddle one single buffer_head.  At which point we may still want to
access the end of the device, but the buffer we use to access it
partially extends past the end.

The 'bd_set_size()' function intentionally sets the block size to avoid
this, but mounting the device - or setting the block size by hand to
some other value - can modify that block size.

So instead, teach 'submit_bh()' about the special case of the buffer
head straddling the end of the device, and turning such an access into a
smaller IO access, avoiding the problem.

This, btw, also means that unlike before, we can now access the whole
device regardless of device block size setting.  So now, even if the
device size is only 512-byte aligned, we can read and write even the
last sector even when having a much bigger block size for accessing the
rest of the device.

So with this, we could now get rid of the 'bd_set_size()' block size
code entirely - resulting in faster IO for the common case - but that
would be a separate patch.

Reported-and-tested-by: Romain Francoise <romain@orebokech.com>
Reporeted-and-tested-by: Meelis Roos <mroos@linux.ee>
Reported-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-04 08:25:11 -08:00
Grant Likely
f2dcd0f828 Merge remote-tracking branch 'robherring/for-next' into devicetree/next 2012-12-04 16:15:52 +00:00
Tejun Heo
fc4b514f27 workqueue: convert BUG_ON()s in __queue_delayed_work() to WARN_ON_ONCE()s
8852aac25e ("workqueue: mod_delayed_work_on() shouldn't queue timer on
0 delay") unexpectedly uncovered a very nasty abuse of delayed_work in
megaraid - it allocated work_struct, casted it to delayed_work and
then pass that into queue_delayed_work().

Previously, this was okay because 0 @delay short-circuited to
queue_work() before doing anything with delayed_work.  8852aac25e
moved 0 @delay test into __queue_delayed_work() after sanity check on
delayed_work making megaraid trigger BUG_ON().

Although megaraid is already fixed by c1d390d8e6 ("megaraid: fix
BUG_ON() from incorrect use of delayed work"), this patch converts
BUG_ON()s in __queue_delayed_work() to WARN_ON_ONCE()s so that such
abusers, if there are more, trigger warning but don't crash the
machine.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Xiaotian Feng <xtfeng@gmail.com>
2012-12-04 07:58:47 -08:00
David Daney
ac53c4fca4 MIPS: Avoid mcheck by flushing page range in huge_ptep_set_access_flags()
Problem:

1) Huge page mapping of anonymous memory is initially invalid.  Will be
   faulted in by copy-on-write mechanism.

2) Userspace attempts store at the end of the huge mapping.

3) TLB Refill exception handler fill TLB with a normal (4K sized)
   invalid page at the end of the huge mapping virtual address range.

4) Userspace restarted, and re-attempts the store at the end of the
   huge mapping.

5) Page from #3 is invalid, we get a fault and go to the hugepage
   fault handler.  This tries to map a huge page and calls
   huge_ptep_set_access_flags() to install the mapping.

6) We just call the generic ptep_set_access_flags() to set up the page
   tables, but the flush there assumes a normal (4K sized) page and
   only tries to flush the first part of the huge page virtual address
   out of the TLB, since the existing entry from step #3 doesn't
   conflict, nothing is flushed.

7) We attempt to load the mapping into the TLB, but because it
   conflicts with the entry from step #3, we get a Machine Check
   exception.

The fix: Flush the entire rage covered by the huge page in
huge_ptep_set_access_flags(), and remove the optimization in
local_flush_tlb_range() so that the flush actually does the correct
thing.

Signed-off-by: David Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: Hillf Danton <dhillf@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/4661/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
(cherry picked from commit dd617f258cc39d36be26afee9912624a2d23112c)
2012-12-04 16:57:54 +01:00
Xiaotian Feng
c1d390d8e6 megaraid: fix BUG_ON() from incorrect use of delayed work
megaraid use INIT_WORK to declare a hotplug_work, but cast the
hotplug_work from work_struct to delayed_work and
schedule_delayed_work on it.  This is very dangerous, as other part of
delayed_work might be kernel memories allocated by others.

With commit 8852aac ("workqueue: mod_delayed_work_on() shouldn't queue
timer on 0 delay"), schedule_delayed_work() will check dwork->timer
before queue_work even when @delay is 0, this causes megaraid code to
hit the BUG_ON() in workqueue code.  Change megaraid code to use
delayed work.

Signed-off-by: Xiaotian Feng <dannyfeng@tencent.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Neela Syam Kolli <megaraidlinux@lsi.com>
Cc: "James E.J. Bottomley" <JBottomley@parallels.com>
Cc: linux-scsi@vger.kernel.org
2012-12-04 07:29:47 -08:00
Eliad Peller
0330ee1f5b wl18xx: declare support for greenfield ht_cap
The 18xx fw supports greenfield so add the
IEEE80211_HT_CAP_GRN_FLD flag to the supported
ht capabilities flags.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Ido Reis <idor@ti.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-12-04 17:05:53 +02:00
Arik Nemtsov
5d979f3517 wlcore: clear roc_vif on iface removal
When removing an interface currently performing a ROC operation, clear
the current ROC state. This is useful especially during recovery and
keeps mac80211 in sync to our state.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-12-04 17:05:52 +02:00
Eliad Peller
2718bf4099 wlcore: remove WLCORE_QUIRK_NO_ELP
all the current firmwares support elp, so
we can safely remove WLCORE_QUIRK_NO_ELP.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-12-04 17:05:52 +02:00
Eliad Peller
3b44b3b368 wlcore: allow ACX_BA_SESSION_RX_SETUP to fail
Under some circumstances, that fw might be asked to
remove a rx ba sessions it doesn't know about. In
this case, instead of triggering a recovery, accept
the error code (CMD_STATUS_NO_RX_BA_SESSION) and
ignore it.

[Arik - indicate failure up when the BA session cannot be setup]

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-12-04 17:05:52 +02:00
Eliad Peller
ea5084356f wlcore: allow fw commands to fail
Currently, each fw command/acx that return a status code
different than CMD_STATUS_SUCCESS will trigger a recovery
in the driver.

However, it is a valid for some fw commands to fail (e.g.
due to temporary lack of resources), so add new functions
that allow passing bitmap of valid error return values.

(make the current wl1271_cmd_send/wl1271_cmd_configure
wrappers around the new functions, in order to avoid
changing the whole driver)

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-12-04 17:05:52 +02:00
Yair Shapira
d88949b7de wl18xx: support 2nd set of mac/phy tx-power params
First set (low, medium and high TX power values) is used
for STA-HP background role. The 2nd set is used for other roles.

Update other mac/phy parameters according to new FW.

Signed-off-by: Yair Shapira <yair.shapira@ti.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>

Conflicts:
	drivers/net/wireless/ti/wl18xx/main.c
2012-12-04 17:01:39 +02:00
Takashi Iwai
f4c482a4d0 ALSA: hda - Fix yet another race of vga_switcheroo registration
The recent fix for vga switcheroo race in commit 128960a9 opened yet
another race.  At the time the audio driver starts probing, user may
turn off D-GPU off.  But at this moment, the audio driver still
doesn't register the vga switcheroo client, thus the switching isn't
notified.  Then the hardware gets off out of sudden, resulting in
invalid reads and lots of "spurious response" error messages.

For solving this situation, the following changes have been done in
this patch:
- Move again vga switcheroo registration to the very early stage of
  the probing; this also requires to set pci drvdata properly before
  registration
- Introduce the completion to synchronize the driver probe at vga
  switcheroo callbacks; this assures that the whole probing finished
  before executing the callbacks

Reported-by: Daniel J Blueman <daniel@quora.org>
Tested-by: Daniel J Blueman <daniel@quora.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-04 16:00:40 +01:00
Ido Reis
ec4f4b76a6 wl18xx: update default mac/phy parameters
Update mac/phy paramters according to the default HP SISO boards.

Signed-off-by: Ido Reis <idor@ti.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-12-04 16:59:31 +02:00
Simon Wunderlich
2f91a96799 mac80211: adapt slot time in IBSS mode
In 5GHz/802.11a, we are allowed to use short slot times. Doing this
may increases performance by 20% for legacy connections (54 MBit/s).
I can confirm this in my tests (27% more throughput using iperf), and
also have a small positive effect (5% more throughput) for HT rates,
tested on 1 stream.

Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-12-04 15:54:43 +01:00
Arik Nemtsov
3ea186d137 wlcore/wl12xx: make sure session id is always zero for AP
The 12xx FW doesn't support non-zero session ids for AP-mode. Introduce
an appropriate quirk to make sure the session id is always zero when
needed.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-12-04 16:43:04 +02:00
Luciano Coelho
aaabee8b76 Merge branch 'wl12xx-next' into for-linville
Conflicts:
	drivers/net/wireless/ti/wlcore/main.c
2012-12-04 16:39:47 +02:00
Luciano Coelho
2f24456149 wl18xx: ignore irrelevant firmware version fields
For wl18xx, only the chip ID and the minor version number are
relevant.  Ignore the other numbers which are either not used or
relate to internal projects or internal branches.

Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-12-04 16:36:12 +02:00
Luciano Coelho
8675f9abdf wlcore/wl12xx/wl18xx: verify multi-role and single-role fw versions
Previously we were only checking the single-role firmware version.
Now add code to check for the firmware versions separately for each
firmware type.

Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-12-04 16:36:12 +02:00
Luciano Coelho
b3ec9cf205 wl12xx: ignore some of the firmware version fields
The firmware type and the project number fields in the firmware
version number, cannot be checked as if they increase sequentially,
because the former is the firmware type and the latter is an internal
project number.  There's no guarantee that these numbers will remain
incremental, so use WLCORE_FW_VER_IGNORE.

Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-12-04 16:36:11 +02:00
Luciano Coelho
af4e94c565 wlcore: change way of checking the firmware version
The firmwares version string contain 5 integers.  We used to consider
all the digits (except for the first one, which indicates the chip) as
linearly increasing version numbers.  This is not correct, because
some of the integers indicate type of firmware (eg. single-role
vs. multi-role) or the internal project it was created for.

Besides, this varies a bit from chip to chip, so we need to make the
firmware version checks more flexible (eg. allow the lower driver to
ignore some of the integers).  Additionally, we need to change the
code so that we only check for a linearly increasing number on the
fields where this actually makes sense.

Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-12-04 16:36:11 +02:00
Luciano Coelho
c3552c0625 wlcore/wl12xx: remove deprecated FW version check
We don't distinguish between STA and AP firmwares anymore, so the
firmware version checking and quirks setting in wl12xx isn't needed
anymore.

Remove implementation of .identify_fw in wl12xx and deprecated
definitions.  Don't remove the op entirely from wlcore, because it may
be needed for more fine-grained checking later.

Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-12-04 16:36:10 +02:00
Luciano Coelho
986f3aa166 wlcore/wl12xx: move wl12xx chip ID defines to the lower driver
Move wl12xx-specific chip ID macros to the wl12xx driver and rename
them to 127X and 128X for clarity since both the "1" (2.4GHz) and the
"3" (2.4GHz and 5GHz) variants use the same chip ID.

Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-12-04 16:36:10 +02:00
Yair Shapira
7230341f25 wlcore/wl18xx/wl12xx: add recovery settings to conf
add support for recovery settings including bug_on_recovery and
no_recovery options.

These options can now be set using wl18xx-conf.bin file and wlconf
tool.

Signed-off-by: Yair Shapira <yair.shapira@ti.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-12-04 16:36:09 +02:00
Luciano Coelho
c108c90535 wlcore: gather information about firmware stability
It's sometimes useful to gather information about the firmware
stability in long test runs, especially to see if problems are
recurring frequently or not.  With this commit we count the number of
times a hardware recovery was issued and print it out during recovery
and in the driver_state in debugfs.

Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Igal Chernobelsky <igalc@ti.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-12-04 16:36:09 +02:00
Eliad Peller
518b680a8e wlcore: move ps change handling to .bss_info_changed()
Adapt the new mac80211 BSS_CHANGED_PS notification,
and do the ps handling in mac80211's per-vif
callback (.bss_info_changed), rather than in
the per-device (.config) callback.

Make sure to configure it only after association.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-12-04 16:36:08 +02:00
Eliad Peller
873d2a4034 wlcore: mask out CCK rates when starting GO
mask out CCK rates from the AP's local rates
when the interace is p2p interface (GO).

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-12-04 16:36:08 +02:00
Eliad Peller
426001a6aa wlcore: use sta_state-based ROCs for AP mode
Try an opportunistic ROC when a STA is first added and stop the ROC when
the STA is removed or successfully authenticated. This would ensure we
don't miss auth/assoc/EAPOL packets during connection

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-12-04 16:36:07 +02:00
Arik Nemtsov
de40750f4b wlcore/wl18xx/wl12xx: separate channel count between chips
18xx chips are capable of staying on 2 channels at the same time.
Introduce a chip-family specific parameter to set the number of channels
in the interface-combinations published by the driver.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-12-04 16:36:07 +02:00
Richard Weinberger
894aef2157 UBI: dont call ubi_self_check_all_ff() in __wl_get_peb()
As ubi_self_check_all_ff() might sleep we are not allowed
to call it from atomic context.
For now we call it only from ubi_wl_get_peb().
There are some code paths where it would also make sense,
but these paths are currently atomic and only enabled
when fastmap is used.

Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-12-04 16:04:31 +02:00
Richard Weinberger
ed4b7021cb UBI: remove PEB from free tree in get_peb_for_wl()
If UBI is built without fastmap, get_peb_for_wl() has to
remove the PEB manially from the free tree.
Otherwise the requested PEB lives in two trees.

Reported-by: Zach Sadecki <zsadecki@itwatchdogs.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-12-04 16:04:16 +02:00
Christian Herzig
d8b1e34e24 mtd: tests/read: initialize buffer for whole next page
fix: do block-buffer initialize for the whole next page to zero.

Signed-off-by: Christian Herzig <christian.herzig@keymile.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-12-04 16:00:34 +02:00
J. Bruce Fields
9b2ef62b15 nfsd4: lockt, release_lockowner should renew clients
Fix nfsd4_lockt and release_lockowner to lookup the referenced client,
so that it can renew it, or correctly return "expired", as appropriate.

Also share some code while we're here.

Reported-by: Frank Filz <ffilzlnx@us.ibm.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-12-04 07:51:12 -05:00
J. Bruce Fields
836fbadb96 svcrpc: support multiple-fragment rpc's
Over TCP, RPC's are preceded by a single 4-byte field telling you how
long the rpc is (in bytes).  The spec also allows you to send an RPC in
multiple such records (the high bit of the length field is used to tell
you whether this is the final record).

We've survived for years without supporting this because in practice the
clients we care about don't use it.  But the userland rpc libraries do,
and every now and then an experimental client will run into this.  (Most
recently I noticed it while trying to write a pynfs check.)  And we're
really on the wrong side of the spec here--let's fix this.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-12-04 07:49:24 -05:00
J. Bruce Fields
8af345f58a svcrpc: track rpc data length separately from sk_tcplen
Keep a separate field, sk_datalen, that tracks only the data contained
in a fragment, not including the fragment header.

For now, this is always just max(0, sk_tcplen - 4), but after we allow
multiple fragments sk_datalen will accumulate the total rpc data size
while sk_tcplen only tracks progress receiving the current fragment.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-12-04 07:49:14 -05:00
J. Bruce Fields
6a72ae2e23 svcrpc: fix off-by-4 error in "incomplete TCP record" dprintk
The full reclen doesn't include the fragment header, but sk_tcplen does.
Fix this to make it an apples-to-apples comparison.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-12-04 07:49:06 -05:00
J. Bruce Fields
ad46ccf094 svcrpc: delay minimum-rpc-size check till later
Soon we want to support multiple fragments, in which case it may be
legal for a single fragment to be smaller than 8 bytes, so we'll want to
delay this check till we've reached the last fragment.

Also fix an outdated comment.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-12-04 07:47:58 -05:00
J. Bruce Fields
cc248d4b1d svcrpc: don't byte-swap sk_reclen in place
Byte-swapping in place is always a little dubious.

Let's instead define this field to always be big-endian, and do the
swapping on demand where we need it.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-12-04 07:47:23 -05:00
Mauro Carvalho Chehab
df5450d519 Linux 3.7-rc8
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.18 (GNU/Linux)
 
 iQEcBAABAgAGBQJQvPxHAAoJEHm+PkMAQRiGkFUIAJz761Kp4J4Nj/wrv5ZHGQso
 MHRbzMkSfRNz6lGCkgxS61ydYKtrV2vuE6VH8HriGlLkI8Lj7MaQTXvYSdj/O0zy
 yV/2H5R3s7n5JZTw3g3eOf3K33tL6xhwd4tYHI7QHjdzSzQyaNhuUuNhxrlT95iv
 twNetm0tyhpf76TurRzF14hLUaShVRXT/FrqWK9wgmGjg7Ij0xp+UFNkeUGUwbeF
 3HMJ98fdd0VD/W8qF5GZr3USks4C+NKtXEya8zQKc59XumKCiRJZmbE6JsJlp+OP
 CsHs7ZaNlInvPcKTFzkNs8ThYWC/NHBqLO5tX5UphW4qFSS39EmHd8igrwXLPaI=
 =RS1F
 -----END PGP SIGNATURE-----

Merge tag 'v3.7-rc8' into staging/for_v3.8

Linux 3.7-rc8

* tag 'v3.7-rc8': (112 commits)
  Linux 3.7-rc8
  [parisc] open(2) compat bug
  Revert "sched, autogroup: Stop going ahead if autogroup is disabled"
  open*(2) compat fixes (s390, arm64)
  8139cp: fix coherent mapping leak in error path.
  tcp: fix crashes in do_tcp_sendpages()
  workqueue: mod_delayed_work_on() shouldn't queue timer on 0 delay
  workqueue: exit rescuer_thread() as TASK_RUNNING
  x86, fpu: Avoid FPU lazy restore after suspend
  drivers/rtc/rtc-tps65910.c: fix invalid pointer access on _remove()
  mm: soft offline: split thp at the beginning of soft_offline_page()
  mm: avoid waking kswapd for THP allocations when compaction is deferred or contended
  revert "Revert "mm: remove __GFP_NO_KSWAPD""
  mm: vmscan: fix endless loop in kswapd balancing
  mm/vmemmap: fix wrong use of virt_to_page
  mm: compaction: fix return value of capture_free_page()
  fix off-by-one in argument passed by iterate_fd() to callbacks
  lookup_one_len: don't accept . and ..
  cifs: get rid of blind d_drop() in readdir
  nfs_lookup_revalidate(): fix a leak
  ...
2012-12-04 10:46:21 -02:00
Rafael J. Wysocki
6b728f1a90 Merge branch 'acpi-general'
* acpi-general:
  ACPI / PNP: Do not crash due to stale pointer use during system resume
  ACPI / video: Add "Asus UL30VT" to ACPI video detect blacklist
  ACPI: do acpisleep dmi check when CONFIG_ACPI_SLEEP is set
2012-12-04 13:46:08 +01:00
Pantelis Antoniou
8f22e8eaba da8xx: Fix revision check on the da8xx driver
The revision check fails for the beaglebone; Add new revision ID.

Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com>
Acked-by: Manjunathappa, Prakash <prakash.pm@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-12-04 11:19:41 +02:00
Wei Yongjun
3bfe5aae8e EDAC, pci_sysfs: Use for_each_pci_dev to simplify the code
Use for_each_pci_dev to simplify the code.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
[Boris: cleanup comments and drop loop brackets]
Signed-off-by: Borislav Petkov <bp@alien8.de>
2012-12-04 08:27:39 +01:00
Eldad Zack
0d9741c0e0 ALSA: usb-audio: sync ep init fix for audioformat mismatch
Commit 947d299686 , "ALSA: snd-usb:
properly initialize the sync endpoint", while correcting the
initialization of the sync endpoint when opening just the data
endpoint, prevents devices that has a sync endpoint, with a channel
number different than that of the data endpoint, from functioning.
Due to a different channel and period bytes count, attempting to
initialize the sync endpoint will fail at the usb host driver.
For example, when using xhci:

 cannot submit urb 0, error -90: internal error

With this patch, if a sync endpoint has multiple audioformats, a
matching audioformat is preferred. An audioformat must be found
with at least one channel and support the requested sample rate
and PCM format, otherwise the stream will not be opened.

If the number of channels differ between the selected audioformat
and the requested format, adjust the period bytes count accordingly.
It is safe to perform the calculation on the basis of the channel
count, since the requested PCM audio format and the rate must be
supported by the selected audioformat.

Cc: Jeffrey Barish <jeff_barish@earthlink.net>
Cc: Daniel Mack <zonque@gmail.com>
Signed-off-by: Eldad Zack <eldad@fogrefinery.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-04 08:14:31 +01:00
Takashi Iwai
f5f165418c ALSA: usb-audio: Fix missing autopm for MIDI input
The commit [88a8516a: ALSA: usbaudio: implement USB autosuspend] added
the support of autopm for USB MIDI output, but it didn't take the MIDI
input into account.

This patch adds the following for fixing the autopm:
- Manage the URB start at the first MIDI input stream open, instead of
  the time of instance creation
- Move autopm code to the common substream_open()
- Make snd_usbmidi_input_start/_stop() more robust and add the running
  state check

Reviewd-by: Clemens Ladisch <clemens@ladisch.de>
Tested-by: Clemens Ladisch <clemens@ladisch.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-04 07:27:44 +01:00
Takashi Iwai
59866da9e4 ALSA: usb-audio: Avoid autopm calls after disconnection
Add a similar protection against the disconnection race and the
invalid use of usb instance after disconnection, as well as we've done
for the USB audio PCM.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=51201

Reviewd-by: Clemens Ladisch <clemens@ladisch.de>
Tested-by: Clemens Ladisch <clemens@ladisch.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-04 07:27:27 +01:00
Inki Dae
5b07c66059 drm/exynos: add vm_ops to specific gem mmaper
Changelog v3:
use drm_file's file object instead of gem object's
- gem object's file represents the shmem storage so
  process-unique file object should be used instead.

Changelog v2:
call mutex_lock before drm_vm_open_locked is called.

Changelog v1:
This patch makes it takes a reference to gem object when
specific gem mmap is requested. For this, it sets
dev->driver->gem_vm_ops to vma->vm_ops.

And this patch is based on exynos-drm-next-iommu branch of
	git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos

Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-12-04 14:46:02 +09:00
Inki Dae
2a3098ff6c drm/exynos: add userptr feature for g2d module
This patch adds userptr feautre for G2D module.

The userptr means user space address allocated by malloc().
And the purpose of this feature is to make G2D's dma able
to access the user space region.

To user this feature, user should flag G2D_BUF_USRPTR to
offset variable of struct drm_exynos_g2d_cmd and fill
struct drm_exynos_g2d_userptr with user space address
and size for it and then should set a pointer to
drm_exynos_g2d_userptr object to data variable of struct
drm_exynos_g2d_cmd. The last bit of offset variable is used
to check if the cmdlist's buffer type is userptr or not.
If userptr, the g2d driver gets user space address and size
and then gets pages through get_user_pages().
(another case is counted as gem handle)

Below is sample codes:

static void set_cmd(struct drm_exynos_g2d_cmd *cmd,
		unsigned long offset, unsigned long data)
{
	cmd->offset = offset;
	cmd->data = data;
}

static int solid_fill_test(int x, int y, unsigned long userptr)
{
	struct drm_exynos_g2d_cmd cmd_gem[5];
	struct drm_exynos_g2d_userptr g2d_userptr;
	unsigned int gem_nr = 0;
	...

	g2d_userptr.userptr = userptr;
	g2d_userptr.size = x * y * 4;

	set_cmd(&cmd_gem[gem_nr++], DST_BASE_ADDR_REG |
					G2D_BUF_USERPTR,
			(unsigned long)&g2d_userptr);
	...
}

int main(int argc, char **argv)
{
	unsigned long addr;
	...

	addr = malloc(x * y * 4);
	...

	solid_fill_test(x, y, addr);
	...
}

And next, the pages are mapped with iommu table and the device
address is set to cmdlist so that G2D's dma can access it.
As you may know, the pages from get_user_pages() are pinned.
In other words, they CAN NOT be migrated and also swapped out.
So the dma access would be safe.

But the use of userptr feature has performance overhead so
this patch also has memory pool to the userptr feature.
Please, assume that user sends cmdlist filled with userptr
and size every time to g2d driver, and the get_user_pages
funcion will be called every time.

The memory pool has maximum 64MB size and the userptr that
user had ever sent, is holded in the memory pool.
This meaning is that if the userptr from user is same as one
in the memory pool, device address to the userptr in the memory
pool is set to cmdlist.

And last, the pages from get_user_pages() will be freed once
user calls free() and the dma access is completed. Actually,
get_user_pages() takes 2 reference counts if the user process
has never accessed user region allocated by malloc(). Then, if
the user calls free(), the page reference count becomes 1 and
becomes 0 with put_page() call. And the reverse holds as well.
This means how the pages backed are used by dma and freed.

This patch is based on "drm/exynos: add iommu support for g2d",
	https://patchwork.kernel.org/patch/1629481/

Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-12-04 14:46:01 +09:00
Prathyush K
1119707e22 drm/exynos: remove unnecessary sg_alloc_table call
The function dma_get_sgtable will allocate a sg table internally so
it is not necessary to allocate a sg table before it. The unnecessary
'sg_alloc_table' call is removed.

Signed-off-by: Prathyush K <prathyush.k@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-12-04 14:46:00 +09:00
Rahul Sharma
4ddc404bc0 drm: exynos: fix for mapping of dma buffers
This patch fixes the problem of mapping contigous and non contigous dma buffers.

Currently page struct is calculated from the buf->dma_addr which is not the
physical address. It is replaced by buf->pages which points to the page struct
of the first page of contigous memory chunk. This gives the correct page frame
number for mapping.

Non-contigous dma buffers are described using SG table and SG lists. Each
valid SG List is pointing to a single page or group of pages which are
physically contigous. Current implementation just maps the first page of each
SG List and leave the other pages unmapped, leading to a crash. Given solution
finds the page struct for the faulting page through parsing SG table and map it.

Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-12-04 14:46:00 +09:00
Inki Dae
ea6d66c3a7 drm/exynos: remove EXYNOS_BO_NONCONTIG type checking.
With iommu support, non-continuous buffer also is supported so
this patch removes these checking from exynos_drm_gem_get/put_dma_addr
funciton.

This patch is based on the below patch set, "drm/exynos: add
iommu support for -next".
	http://www.spinics.net/lists/dri-devel/msg29041.html

Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-12-04 14:45:59 +09:00