Commit graph

361,021 commits

Author SHA1 Message Date
Yaniv Rosner
092a5fc963 bnx2x: recognize fan failure
If fan failure is detected, MCP prevents PCI I/O registers from being
mapped to the bar, causing a fatal error as driver is unaware.

This patch recognizes such an event occurred and gracefully terminates
the probe process.

Signed-off-by: Yaniv Rosner <yaniv.rosner@broadcom.com>
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-03 13:46:43 -05:00
John W. Linville
06ef5c4bbb Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next 2012-12-03 13:46:03 -05:00
Michael S. Tsirkin
64e9a9b8a0 vhost-net: initialize zcopy packet counters
These packet counters are used to drive the zercopy
selection heuristic so nothing too bad happens if they are off a bit -
and they are also reset once in a while.
But it's cleaner to clear them when backend is set so that
we start in a known state.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-03 13:42:17 -05:00
walimis
3e14bd390e stmmac: remove two repeated macros
Two macros have been defined twice, remove them.

Signed-off-by: Liming Wang <walimisdev@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-03 13:35:36 -05:00
Denis Kirjanov
f210e87b6d sundance: Enable WoL support
Enable WoL support.

Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-03 13:32:15 -05:00
Michele Baldessari
196d675934 sctp: Add support to per-association statistics via a new SCTP_GET_ASSOC_STATS call
The current SCTP stack is lacking a mechanism to have per association
statistics. This is an implementation modeled after OpenSolaris'
SCTP_GET_ASSOC_STATS.

Userspace part will follow on lksctp if/when there is a general ACK on
this.
V4:
- Move ipackets++ before q->immediate.func() for consistency reasons
- Move sctp_max_rto() at the end of sctp_transport_update_rto() to avoid
  returning bogus RTO values
- return asoc->rto_min when max_obs_rto value has not changed

V3:
- Increase ictrlchunks in sctp_assoc_bh_rcv() as well
- Move ipackets++ to sctp_inq_push()
- return 0 when no rto updates took place since the last call

V2:
- Implement partial retrieval of stat struct to cope for future expansion
- Kill the rtxpackets counter as it cannot be precise anyway
- Rename outseqtsns to outofseqtsns to make it clearer that these are out
  of sequence unexpected TSNs
- Move asoc->ipackets++ under a lock to avoid potential miscounts
- Fold asoc->opackets++ into the already existing asoc check
- Kill unneeded (q->asoc) test when increasing rtxchunks
- Do not count octrlchunks if sending failed (SCTP_XMIT_OK != 0)
- Don't count SHUTDOWNs as SACKs
- Move SCTP_GET_ASSOC_STATS to the private space API
- Adjust the len check in sctp_getsockopt_assoc_stats() to allow for
  future struct growth
- Move association statistics in their own struct
- Update idupchunks when we send a SACK with dup TSNs
- return min_rto in max_rto when RTO has not changed. Also return the
  transport when max_rto last changed.

Signed-off: Michele Baldessari <michele@acksyn.org>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-03 13:32:15 -05:00
Alexander Shiyan
96070ae4d0 irda: ep7211-sir: Convert to platform_diver
This patch converts ep7211-sir driver to platform_driver.
Since driver can be used not only for EP7211 CPU, function names
was be renamed to generic clps711x...

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-03 13:32:15 -05:00
Dave Chinner
f9668a09e3 xfs: fix sparse reported log CRC endian issue
Not a bug as such, just warning noise from the xlog_cksum()
returning a __be32 type when it should be returning a __le32 type.

On Wed, Nov 28, 2012 at 08:30:59AM -0500, Christoph Hellwig wrote:
> But why are we storing the crc field little endian while all other on
> disk formats are big endian? (And yes I realize it might as well have
> been me who did that back in the idea, but I still have no idea why)

Because the CRC always returns the calcuation LE format, even on BE
systems. So rather than always having to byte swap it everywhere and
have all the force casts and anootations for sparse, it seems simpler to
just make it a __le32 everywhere....

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-12-03 12:10:59 -06:00
Gustavo Padovan
0b27a4b97c Revert "Bluetooth: Fix possible deadlock in SCO code"
This reverts commit 269c4845d5.

The commit was causing dead locks and NULL dereferences in the sco code:

 [28084.104013] BUG: soft lockup - CPU#0 stuck for 22s! [kworker/u:0H:7]
 [28084.104021] Modules linked in: btusb bluetooth <snip [last unloaded:
bluetooth]
...
 [28084.104021]  [<c160246d>] _raw_spin_lock+0xd/0x10
 [28084.104021]  [<f920e708>] sco_conn_del+0x58/0x1b0 [bluetooth]
 [28084.104021]  [<f920f1a9>] sco_connect_cfm+0xb9/0x2b0 [bluetooth]
 [28084.104021]  [<f91ef289>]
hci_sync_conn_complete_evt.isra.94+0x1c9/0x260 [bluetooth]
 [28084.104021]  [<f91f1a8d>] hci_event_packet+0x74d/0x2b40 [bluetooth]
 [28084.104021]  [<c1501abd>] ? __kfree_skb+0x3d/0x90
 [28084.104021]  [<c1501b46>] ? kfree_skb+0x36/0x90
 [28084.104021]  [<f91fcb4e>] ? hci_send_to_monitor+0x10e/0x190 [bluetooth]
 [28084.104021]  [<f91fcb4e>] ? hci_send_to_monitor+0x10e/0x190 [bluetooth]

Cc: stable@vger.kernel.org
Reported-by: Chan-yeol Park <chanyeol.park@gmail.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-12-03 16:00:04 -02:00
Andrei Emeltchenko
f2592d3ee3 Bluetooth: trivial: Change NO_FCS_RECV to RECV_NO_FCS
Make code more readable by changing CONF_NO_FCS_RECV which is read
as "No L2CAP FCS option received" to CONF_RECV_NO_FCS which means
"Received L2CAP option NO_FCS". This flag really means that we have
received L2CAP FRAME CHECK SEQUENCE (FCS) OPTION with value "No FCS".

Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-12-03 16:00:01 -02:00
Andrei Emeltchenko
cbabee788f Bluetooth: Process receiving FCS_NONE in L2CAP Conf Rsp
Process L2CAP Config rsp Pending with FCS Option 0x00 (No FCS)
which is sent by Motorola Windows 7 Bluetooth stack. The trace
is shown below (all other options are skipped).

...
< ACL data: handle 1 flags 0x00 dlen 48
    L2CAP(s): Config req: dcid 0x0043 flags 0x00 clen 36
      ...
      FCS Option 0x00 (No FCS)
> ACL data: handle 1 flags 0x02 dlen 48
    L2CAP(s): Config req: dcid 0x0041 flags 0x00 clen 36
      ...
      FCS Option 0x01 (CRC16 Check)
< ACL data: handle 1 flags 0x00 dlen 47
    L2CAP(s): Config rsp: scid 0x0043 flags 0x00 result 4 clen 33
      Pending
      ...
> ACL data: handle 1 flags 0x02 dlen 50
    L2CAP(s): Config rsp: scid 0x0041 flags 0x00 result 4 clen 36
      Pending
      ...
      FCS Option 0x00 (No FCS)
< ACL data: handle 1 flags 0x00 dlen 14
    L2CAP(s): Config rsp: scid 0x0043 flags 0x00 result 0 clen 0
      Success
> ACL data: handle 1 flags 0x02 dlen 14
    L2CAP(s): Config rsp: scid 0x0041 flags 0x00 result 0 clen 0
      Success
...

Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-12-03 16:00:01 -02:00
Andrei Emeltchenko
60918918a9 Bluetooth: Fix missing L2CAP EWS Conf parameter
If L2CAP_FEAT_FCS is not supported we sould miss EWS option
configuration because of break. Make code more readable by
combining FCS configuration in the single block.

Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-12-03 16:00:00 -02:00
Andrei Emeltchenko
5d05416e09 Bluetooth: AMP: Check that AMP is present and active
Before starting quering remote AMP controllers make sure
that there is local active AMP controller.

Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-12-03 16:00:00 -02:00
Andrei Emeltchenko
ced5c338d7 Bluetooth: AMP: Mark controller radio powered down after HCIDEVDOWN
After getting HCIDEVDOWN controller did not mark itself as 0x00 which
means: "The Controller radio is available but is currently physically
powered down". The result was even if the hdev was down we return
in controller list value 0x01 "status 0x01 (Bluetooth only)".

Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-12-03 15:59:59 -02:00
Andrei Emeltchenko
5e4e3972b8 Bluetooth: Refactor l2cap_send_disconn_req
l2cap_send_disconn_req takes 3 parameters of which conn might be
derived from chan. Make this conversion inside l2cap_send_disconn_req.

Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-12-03 15:59:59 -02:00
Gustavo Padovan
ffa88e02bc Bluetooth: Move double negation to macros
Some comparisons needs to double negation(!!) in order to make the value
of the field boolean. Add it to the macro makes the code more readable.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-12-03 15:59:59 -02:00
Frédéric Dalleau
20714bfef8 Bluetooth: Implement deferred sco socket setup
In order to authenticate and configure an incoming SCO connection, the
BT_DEFER_SETUP option was added. This option is intended to defer reply
to Connect Request on SCO sockets.
When a connection is requested, the listening socket is unblocked but
the effective connection setup happens only on first recv. Any send
between accept and recv fails with -ENOTCONN.

Signed-off-by: Frédéric Dalleau <frederic.dalleau@linux.intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-12-03 15:59:58 -02:00
Frédéric Dalleau
b96e9c671b Bluetooth: Add BT_DEFER_SETUP option to sco socket
This option will set the BT_SK_DEFER_SETUP bit in socket flags.

Signed-off-by: Frédéric Dalleau <frederic.dalleau@linux.intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-12-03 15:59:58 -02:00
Gustavo Padovan
b9b5ef188e Bluetooth: cancel power_on work when unregistering the device
We need to cancel the hci_power_on work in order to avoid it run when we
try to free the hdev.

[ 1434.201149] ------------[ cut here ]------------
[ 1434.204998] WARNING: at lib/debugobjects.c:261 debug_print_object+0x8e/0xb0()
[ 1434.208324] ODEBUG: free active (active state 0) object type: work_struct hint: hci
_power_on+0x0/0x90
[ 1434.210386] Pid: 8564, comm: trinity-child25 Tainted: G        W    3.7.0-rc5-next-
20121112-sasha-00018-g2f4ce0e #127
[ 1434.210760] Call Trace:
[ 1434.210760]  [<ffffffff819f3d6e>] ? debug_print_object+0x8e/0xb0
[ 1434.210760]  [<ffffffff8110b887>] warn_slowpath_common+0x87/0xb0
[ 1434.210760]  [<ffffffff8110b911>] warn_slowpath_fmt+0x41/0x50
[ 1434.210760]  [<ffffffff819f3d6e>] debug_print_object+0x8e/0xb0
[ 1434.210760]  [<ffffffff8376b750>] ? hci_dev_open+0x310/0x310
[ 1434.210760]  [<ffffffff83bf94e5>] ? _raw_spin_unlock_irqrestore+0x55/0xa0
[ 1434.210760]  [<ffffffff819f3ee5>] __debug_check_no_obj_freed+0xa5/0x230
[ 1434.210760]  [<ffffffff83785db0>] ? bt_host_release+0x10/0x20
[ 1434.210760]  [<ffffffff819f4d15>] debug_check_no_obj_freed+0x15/0x20
[ 1434.210760]  [<ffffffff8125eee7>] kfree+0x227/0x330
[ 1434.210760]  [<ffffffff83785db0>] bt_host_release+0x10/0x20
[ 1434.210760]  [<ffffffff81e539e5>] device_release+0x65/0xc0
[ 1434.210760]  [<ffffffff819d3975>] kobject_cleanup+0x145/0x190
[ 1434.210760]  [<ffffffff819d39cd>] kobject_release+0xd/0x10
[ 1434.210760]  [<ffffffff819d33cc>] kobject_put+0x4c/0x60
[ 1434.210760]  [<ffffffff81e548b2>] put_device+0x12/0x20
[ 1434.210760]  [<ffffffff8376a334>] hci_free_dev+0x24/0x30
[ 1434.210760]  [<ffffffff82fd8fe1>] vhci_release+0x31/0x60
[ 1434.210760]  [<ffffffff8127be12>] __fput+0x122/0x250
[ 1434.210760]  [<ffffffff811cab0d>] ? rcu_user_exit+0x9d/0xd0
[ 1434.210760]  [<ffffffff8127bf49>] ____fput+0x9/0x10
[ 1434.210760]  [<ffffffff81133402>] task_work_run+0xb2/0xf0
[ 1434.210760]  [<ffffffff8106cfa7>] do_notify_resume+0x77/0xa0
[ 1434.210760]  [<ffffffff83bfb0ea>] int_signal+0x12/0x17
[ 1434.210760] ---[ end trace a6d57fefbc8a8cc7 ]---

Cc: stable@vger.kernel.org
Reported-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-12-03 15:59:43 -02:00
Gustavo Padovan
dc2a0e20fb Bluetooth: Add missing lock nesting notation
This patch fixes the following report, it happens when accepting rfcomm
connections:

[  228.165378] =============================================
[  228.165378] [ INFO: possible recursive locking detected ]
[  228.165378] 3.7.0-rc1-00536-gc1d5dc4 #120 Tainted: G        W
[  228.165378] ---------------------------------------------
[  228.165378] bluetoothd/1341 is trying to acquire lock:
[  228.165378]  (sk_lock-AF_BLUETOOTH-BTPROTO_RFCOMM){+.+...}, at:
[<ffffffffa0000aa0>] bt_accept_dequeue+0xa0/0x180 [bluetooth]
[  228.165378]
[  228.165378] but task is already holding lock:
[  228.165378]  (sk_lock-AF_BLUETOOTH-BTPROTO_RFCOMM){+.+...}, at:
[<ffffffffa0205118>] rfcomm_sock_accept+0x58/0x2d0 [rfcomm]
[  228.165378]
[  228.165378] other info that might help us debug this:
[  228.165378]  Possible unsafe locking scenario:
[  228.165378]
[  228.165378]        CPU0
[  228.165378]        ----
[  228.165378]   lock(sk_lock-AF_BLUETOOTH-BTPROTO_RFCOMM);
[  228.165378]   lock(sk_lock-AF_BLUETOOTH-BTPROTO_RFCOMM);
[  228.165378]
[  228.165378]  *** DEADLOCK ***
[  228.165378]
[  228.165378]  May be due to missing lock nesting notation

Cc: stable@vger.kernel.org
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-12-03 15:59:10 -02:00
Ming Lei
a015757304 ARM: dma-mapping: support debug_dma_mapping_error
Without the patch, kind of below warning will be dumped if DMA-API
debug is enabled:

[   11.069763] ------------[ cut here ]------------
[   11.074645] WARNING: at lib/dma-debug.c:948 check_unmap+0x770/0x860()
[   11.081420] ehci-omap ehci-omap.0: DMA-API: device driver failed to
check map error[device address=0x0000000
0adb78e80] [size=8 bytes] [mapped as single]
[   11.095611] Modules linked in:

Cc: Russell King <linux@arm.linux.org.uk>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
2012-12-03 18:55:28 +01:00
Omar Ramirez Luna
298ea44f21 ARM: OMAP4: hwmod data: ipu and dsp to use parent clocks instead of leaf clocks
This prevents hwmod _enable_clocks...omap2_dflt_clk_enable path
from enabling modulemode inside CLKCTRL using its clk->enable_reg
field. Instead is left to _omap4_enable_module though soc_ops, as
the one in charge of this setting.

According to comments received[1] for related patches the idea is
to get rid of leaf clocks in future. So remove these two while at it.

[1] http://lkml.org/lkml/2012/8/20/226

Signed-off-by: Omar Ramirez Luna <omar.luna@linaro.org>
Tested-by: Ohad Ben-Cohen <ohad@wizery.com>
Acked-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
2012-12-03 18:48:44 +01:00
Omar Ramirez Luna
ebf7cda0f9 iommu/omap: Adapt to runtime pm
Use runtime PM functionality interfaced with hwmod enable/idle
functions, to replace direct clock operations and sysconfig
handling.

Due to reset sequence, pm_runtime_[get|put]_sync must be used, to
avoid possible operations with the module under reset. Because of
this and given that the driver uses spin_locks to protect their
critical sections, we must use pm_runtime_irq_safe in order for the
runtime ops to be happy, otherwise might_sleep_if checks in runtime
framework will complain.

The remaining pm_runtime out of iommu_enable and iommu_disable
corresponds to paths that can be accessed through debugfs, some of
them doesn't work if the module is not enabled first, but in future
if the mmu is idled withouth freeing, these are needed to debug.

Signed-off-by: Omar Ramirez Luna <omar.luna@linaro.org>
Tested-by: Ohad Ben-Cohen <ohad@wizery.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
2012-12-03 18:48:23 +01:00
Omar Ramirez Luna
72b15b6ae9 iommu/omap: Migrate to hwmod framework
Use hwmod data and device attributes to build and register an
omap device for iommu driver.

 - Update the naming convention in isp module.
 - Remove unneeded check for number of resources, as this is now
   handled by omap_device and prevents driver from loading.
 - Now unused, remove platform device and resource data, handling
   of sysconfig register for softreset purposes, use default
   latency structure.
 - Use hwmod API for reset handling.

Signed-off-by: Omar Ramirez Luna <omar.luna@linaro.org>
Tested-by: Ohad Ben-Cohen <ohad@wizery.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
2012-12-03 18:48:13 +01:00
Omar Ramirez Luna
87f8e57327 iommu/omap: Keep mmu enabled when requested
The purpose of the mmu is to handle the memory accesses requested by
its users. Typically, the mmu is bundled with the processing unit in
a single IP block, which makes them to share the same clock to be
functional.

Currently, iommu code assumes that its user will be indirectly
clocking it, but being a separate mmu driver, it should handle
its own clocks, so as long as the mmu is requested it will be
powered ON and once detached it will be powered OFF.

The remaining clock handling out of iommu_enable and iommu_disable
corresponds to paths that can be accessed through debugfs, some of
them doesn't work if the module is not enabled first, but in future
if the mmu is idled withouth freeing, these are needed to debug.

Signed-off-by: Omar Ramirez Luna <omar.luna@linaro.org>
Tested-by: Ohad Ben-Cohen <ohad@wizery.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
2012-12-03 18:48:01 +01:00
Omar Ramirez Luna
a33977206c iommu/omap: Remove redundant clock handling on ISR
For the interrupt to be generated, the mmu clock should be already
enabled while translating a virtual address, so, this call to clock
handling is just increasing/decreasing the counter.

This works now, because its users need the same clock and they
indirectly power the mmu, in this interrupt context the handling of
clocks inside the ISR doesn't seem to be needed nor helping.

Next patch should also correct the dependency on clients to handle
iommu clocks.

Signed-off-by: Omar Ramirez Luna <omar.luna@linaro.org>
Tested-by: Ohad Ben-Cohen <ohad@wizery.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
2012-12-03 18:47:30 +01:00
Joerg Roedel
18e170d03b Merge branch 'omap-for-v3.8/cleanup-headers-iommu' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/omap 2012-12-03 18:40:59 +01:00
Ville Syrjälä
633cf8f505 drm/i915: Don't allow ring tail to reach the same cacheline as head
From BSpec:
"If the Ring Buffer Head Pointer and the Tail Pointer are on the same
cacheline, the Head Pointer must not be greater than the Tail
Pointer."

The easiest way to enforce this is to reduce the reported ring space.

References:
Gen2 BSpec "1. Programming Environment" / 1.4.4.6 "Ring Buffer Use"
Gen3 BSpec "vol1c Memory Interface Functions" / 2.3.4.5 "Ring Buffer Use"
Gen4+ BSpec "vol1c Memory Interface and Command Stream" / 5.3.4.5 "Ring Buffer Use"

v2: Include the exact BSpec references in the description

v3: s/64/I915_RING_FREE_SPACE, and add the BSpec information to the code

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-12-03 18:31:20 +01:00
Damien Lespiau
4239ca779d drm/i915: Fix dieing -> dying typo
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-12-03 18:25:02 +01:00
Alex Deucher
1c4c3a9943 drm/radeon/dce4/5: add registers for ELD handling
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-12-03 12:00:36 -05:00
Alex Deucher
fbed600af1 drm/radeon/dce3.2: add registers for ELD handling
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-12-03 12:00:35 -05:00
Gao feng
7083d0378a cgroup: remove subsystem files when remounting cgroup
cgroup_clear_directroy is called by cgroup_d_remove_dir
and cgroup_remount.

when we call cgroup_remount to remount the cgroup,the subsystem
may be unlinked from cgroupfs_root->subsys_list in rebind_subsystem,this
subsystem's files will not be removed in cgroup_clear_directroy.
And the system will panic when we try to access these files.

this patch removes subsystems's files before rebind_subsystems,
if rebind_subsystems failed, repopulate these removed files.

With help from Tejun.

Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2012-12-03 08:33:11 -08:00
Chris Wilson
a2165e3123 drm/i915: Decouple the object from the unbound list before freeing pages
As we may actually allocate in order to save the physical swizzling bits
during the free, we have to be careful not to trigger the shrinker on
the same object.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
[danvet: Added a small comment in the code to really drive the
scariness of this patch home.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-12-03 17:22:16 +01:00
Wei Yongjun
bafff1743f s390/pci: fix potential NULL pointer dereference in dma_free_seg_table()
The dereference to 'zdev' should be moved below the NULL test.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-12-03 10:44:11 -05:00
Wei Yongjun
4118fee78d s390/pci: use kmem_cache_zalloc instead of kmem_cache_alloc/memset
Using kmem_cache_zalloc() instead of kmem_cache_alloc() and memset().

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-12-03 10:44:07 -05:00
Heiko Carstens
916908df24 s390/bpf,jit: add support for XOR instruction
Add support for XOR instruction for use with X/K.

s390 JIT support for the new BPF_S_ALU_XOR_* instructions introduced
with 9e49e889 "filter: add XOR instruction for use with X/K".

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-12-03 10:44:05 -05:00
Heiko Carstens
3247274536 s390/bpf,jit: add support MOD instruction
Add support for MOD operation for s390's JIT.

Same as 280050cc "x86 bpf_jit: support MOD operation" for x86 which
adds JIT support for the generic new MOD operation introduced with
b6069a9570 "filter: add MOD operation".

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-12-03 10:44:02 -05:00
Sebastian Ott
d99e79ec55 s390/cio: fix pgid reserved check
The check to whom a device is reserved is done by checking the path
state of the affected channel paths. If it turns out that one path is
flagged as reserved by someone else the whole device is marked as such.

However the meaning of the RESVD_ELSE bit is that the addressed device
is reserved to a different pathgroup (and not reserved to a different
LPAR). If we do this test on a path which is currently not a member of
the pathgroup we could erroneously mark the device as reserved to
someone else.

To fix this collect the reserved state for all potential members of the
pathgroup and only mark the device as reserved if all of those potential
members have the RESVD_ELSE bit set.

Cc: stable@vger.kernel.org
Acked-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-12-03 10:43:58 -05:00
Bryan Schumaker
6c1e82a4b7 NFSD: Forget state for a specific client
Write the client's ip address to any state file and all appropriate
state for that client will be forgotten.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-12-03 09:59:03 -05:00
Bryan Schumaker
d7cc431edd NFSD: Add a custom file operations structure for fault injection
Controlling the read and write functions allows me to add in "forget
client w.x.y.z", since we won't be limited to reading and writing only
u64 values.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-12-03 09:59:02 -05:00
Bryan Schumaker
184c18471f NFSD: Reading a fault injection file prints a state count
I also log basic information that I can figure out about the type of
state (such as number of locks for each client IP address).  This can be
useful for checking that state was actually dropped and later for
checking if the client was able to recover.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-12-03 09:59:01 -05:00
Bryan Schumaker
8ce54e0d82 NFSD: Fault injection operations take a per-client forget function
The eventual goal is to forget state based on ip address, so it makes
sense to call this function in a for-each-client loop until the correct
amount of state is forgotten.  I also use this patch as an opportunity
to rename the forget function from "func()" to "forget()".

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-12-03 09:59:00 -05:00
Bryan Schumaker
269de30f10 NFSD: Clean up forgetting and recalling delegations
Once I have a client, I can easily use its delegation list rather than
searching the file hash table for delegations to remove.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-12-03 09:58:59 -05:00
Bryan Schumaker
4dbdbda84f NFSD: Clean up forgetting openowners
Using "forget_n_state()" forces me to implement the code needed to
forget a specific client's openowners.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-12-03 09:58:58 -05:00
Bryan Schumaker
fc29171f5b NFSD: Clean up forgetting locks
I use the new "forget_n_state()" function to iterate through each client
first when searching for locks.  This may slow down forgetting locks a
little bit, but it implements most of the code needed to forget a
specified client's locks.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-12-03 09:58:56 -05:00
Bryan Schumaker
44e34da60b NFSD: Clean up forgetting clients
I added in a generic for-each loop that takes a pass over the client_lru
list for the current net namespace and calls some function.  The next few
patches will update other operations to use this function as well.  A value
of 0 still means "forget everything that is found".

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-12-03 09:58:55 -05:00
Bryan Schumaker
043958395a NFSD: Lock state before calling fault injection function
Each function touches state in some way, so getting the lock earlier
can help simplify code.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-12-03 09:58:54 -05:00
J. Bruce Fields
e5f9570319 nfsd4: discard some unused nfsd4_verify xdr code
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-12-03 09:43:51 -05:00
Josh Wu
c0c70d9ee6 mtd: at91: atmel_nand: return bit flips for the PMECC read_page()
This patch fix pmecc's read_page() to return maximum number of bitflips, 0 if uncorrectable.

In the commit: 3f91e94f7f ("mtd: nand: read_page() returns max_bitflips ()"),
The ecc.read_page() is changed to return the maximum number of bitflips.
And when meet uncorrectable bitflips it needs to return 0.

See the comment in nand.h:
 * @read_page:	function to read a page according to the ECC generator
 *		requirements; returns maximum number of bitflips corrected in
 *		any single ECC step, 0 if bitflips uncorrectable, -EIO hw error

Signed-off-by: Josh Wu <josh.wu@atmel.com>
Reviewed-by: Mike Dunn <mikedunn@newsguy.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-12-03 16:36:53 +02:00
Harald Nordgard-Hansen
070c32223a mtd: fix recovery after failed write-buffer operation in cfi_cmdset_0002.c
When working on a problem with some flash chips that lock up during
write-buffer operations, I think there may be a bug in the linux
handling of chips using cfi_cmdset_0002.c.

The datasheets I have found for a number of these chips all specify that
when aborting a write-buffer command, it is not enough to use the
standard reset.  Rather a "write-to-buffer-reset command" is needed.
This command is quite similar for all chips, the main variance seem to
be if the final 0xF0 can go to any address or must go to addr_unlock1.

The bug is then in the recovery handling when timing out at the end of
do_write_buffer, where using the normal reset command is not sufficient.

Without this change, if the write-buffer command fails then any
following operations on the flash also fail.

Signed-off-by: Harald Nordgard-Hansen <hhansen@pvv.org>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-12-03 16:36:52 +02:00