mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/
synced 2026-11-15 19:56:03 +00:00
456 commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
|
|
d3852f9692 |
mm, swap: drop the SWAP_HAS_CACHE flag
Now, the swap cache is managed by the swap table. All swap cache users are checking the swap table directly to check the swap cache state. SWAP_HAS_CACHE is now just a temporary pin before the first increase from 0 to 1 of a slot's swap count (swap_dup_entries) after swap allocation (folio_alloc_swap), or before the final free of slots pinned by folio in swap cache (put_swap_folio). Drop these two usages. For the first dup, SWAP_HAS_CACHE pinning was hard to kill because it used to have multiple meanings, more than just "a slot is cached". We have just simplified that and defined that the first dup is always done with folio locked in swap cache (folio_dup_swap), so stop checking the SWAP_HAS_CACHE bit and just check the swap cache (swap table) directly, and add a WARN if a swap entry's count is being increased for the first time while the folio is not in swap cache. As for freeing, just let the swap cache free all swap entries of a folio that have a swap count of zero directly upon folio removal. We have also just cleaned up batch freeing to check the swap cache usage using the swap table: a slot with swap cache in the swap table will not be freed until its cache is gone, and no SWAP_HAS_CACHE bit is involved anymore. And besides, the removal of a folio and freeing of the slots are being done in the same critical section now, which should improve the performance. After these two changes, SWAP_HAS_CACHE no longer has any users. Swap cache synchronization is also done by the swap table directly, so using SWAP_HAS_CACHE to pin a slot before adding the cache is also no longer needed. Remove all related logic and helpers. swap_map is now only used for tracking the count, so all swap_map users can just read it directly, ignoring the swap_count helper, which was previously used to filter out the SWAP_HAS_CACHE bit. The idea of dropping SWAP_HAS_CACHE and using the swap table directly was initially from Chris's idea of merging all the metadata usage of all swaps into one place. Link: https://lkml.kernel.org/r/20251220-swap-table-p2-v5-18-8862a265a033@tencent.com Signed-off-by: Kairui Song <kasong@tencent.com> Suggested-by: Chris Li <chrisl@kernel.org> Reviewed-by: Baoquan He <bhe@redhat.com> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Barry Song <baohua@kernel.org> Cc: Nhat Pham <nphamcs@gmail.com> Cc: Rafael J. Wysocki (Intel) <rafael@kernel.org> Cc: Yosry Ahmed <yosry.ahmed@linux.dev> Cc: Deepanshu Kartikey <kartikey406@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kairui Song <ryncsn@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
|
270f095179 |
mm, swap: add folio to swap cache directly on allocation
The allocator uses SWAP_HAS_CACHE to pin a swap slot upon allocation. SWAP_HAS_CACHE is being deprecated as it caused a lot of confusion. This pinning usage here can be dropped by adding the folio to swap cache directly on allocation. All swap allocations are folio-based now (except for hibernation), so the swap allocator can always take the folio as the parameter. And now both swap cache (swap table) and swap map are protected by the cluster lock, scanning the map and inserting the folio can be done in the same critical section. This eliminates the time window that a slot is pinned by SWAP_HAS_CACHE, but it has no cache, and avoids touching the lock multiple times. This is both a cleanup and an optimization. Link: https://lkml.kernel.org/r/20251220-swap-table-p2-v5-15-8862a265a033@tencent.com Signed-off-by: Kairui Song <kasong@tencent.com> Reviewed-by: Baoquan He <bhe@redhat.com> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Barry Song <baohua@kernel.org> Cc: Chris Li <chrisl@kernel.org> Cc: Nhat Pham <nphamcs@gmail.com> Cc: Rafael J. Wysocki (Intel) <rafael@kernel.org> Cc: Yosry Ahmed <yosry.ahmed@linux.dev> Cc: Deepanshu Kartikey <kartikey406@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kairui Song <ryncsn@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
|
3697615914 |
mm, swap: cleanup swap entry management workflow
The current swap entry allocation/freeing workflow has never had a clear definition. This makes it hard to debug or add new optimizations. This commit introduces a proper definition of how swap entries would be allocated and freed. Now, most operations are folio based, so they will never exceed one swap cluster, and we now have a cleaner border between swap and the rest of mm, making it much easier to follow and debug, especially with new added sanity checks. Also making more optimization possible. Swap entry will be mostly freed and free with a folio bound. The folio lock will be useful for resolving many swap related races. Now swap allocation (except hibernation) always starts with a folio in the swap cache, and gets duped/freed protected by the folio lock: - folio_alloc_swap() - The only allocation entry point now. Context: The folio must be locked. This allocates one or a set of continuous swap slots for a folio and binds them to the folio by adding the folio to the swap cache. The swap slots' swap count start with zero value. - folio_dup_swap() - Increase the swap count of one or more entries. Context: The folio must be locked and in the swap cache. For now, the caller still has to lock the new swap entry owner (e.g., PTL). This increases the ref count of swap entries allocated to a folio. Newly allocated swap slots' count has to be increased by this helper as the folio got unmapped (and swap entries got installed). - folio_put_swap() - Decrease the swap count of one or more entries. Context: The folio must be locked and in the swap cache. For now, the caller still has to lock the new swap entry owner (e.g., PTL). This decreases the ref count of swap entries allocated to a folio. Typically, swapin will decrease the swap count as the folio got installed back and the swap entry got uninstalled This won't remove the folio from the swap cache and free the slot. Lazy freeing of swap cache is helpful for reducing IO. There is already a folio_free_swap() for immediate cache reclaim. This part could be further optimized later. The above locking constraints could be further relaxed when the swap table is fully implemented. Currently dup still needs the caller to lock the swap entry container (e.g. PTL), or a concurrent zap may underflow the swap count. Some swap users need to interact with swap count without involving folio (e.g. forking/zapping the page table or mapping truncate without swapin). In such cases, the caller has to ensure there is no race condition on whatever owns the swap count and use the below helpers: - swap_put_entries_direct() - Decrease the swap count directly. Context: The caller must lock whatever is referencing the slots to avoid a race. Typically the page table zapping or shmem mapping truncate will need to free swap slots directly. If a slot is cached (has a folio bound), this will also try to release the swap cache. - swap_dup_entry_direct() - Increase the swap count directly. Context: The caller must lock whatever is referencing the entries to avoid race, and the entries must already have a swap count > 1. Typically, forking will need to copy the page table and hence needs to increase the swap count of the entries in the table. The page table is locked while referencing the swap entries, so the entries all have a swap count > 1 and can't be freed. Hibernation subsystem is a bit different, so two special wrappers are here: - swap_alloc_hibernation_slot() - Allocate one entry from one device. - swap_free_hibernation_slot() - Free one entry allocated by the above helper. All hibernation entries are exclusive to the hibernation subsystem and should not interact with ordinary swap routines. By separating the workflows, it will be possible to bind folio more tightly with swap cache and get rid of the SWAP_HAS_CACHE as a temporary pin. This commit should not introduce any behavior change [kasong@tencent.com: fix leak, per Chris Mason. Remove WARN_ON, per Lai Yi] Link: https://lkml.kernel.org/r/CAMgjq7AUz10uETVm8ozDWcB3XohkOqf0i33KGrAquvEVvfp5cg@mail.gmail.com [ryncsn@gmail.com: fix KSM copy pages for swapoff, per Chris] Link: https://lkml.kernel.org/r/aXxkANcET3l2Xu6J@KASONG-MC4 Link: https://lkml.kernel.org/r/20251220-swap-table-p2-v5-14-8862a265a033@tencent.com Signed-off-by: Kairui Song <kasong@tencent.com> Signed-off-by: Kairui Song <ryncsn@gmail.com> Acked-by: Rafael J. Wysocki (Intel) <rafael@kernel.org> Reviewed-by: Baoquan He <bhe@redhat.com> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Barry Song <baohua@kernel.org> Cc: Chris Li <chrisl@kernel.org> Cc: Nhat Pham <nphamcs@gmail.com> Cc: Yosry Ahmed <yosry.ahmed@linux.dev> Cc: Deepanshu Kartikey <kartikey406@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kairui Song <ryncsn@gmail.com> Cc: Chris Mason <clm@fb.com> Cc: Chris Mason <clm@meta.com> Cc: Lai Yi <yi1.lai@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
|
2732acda82 |
mm, swap: use swap cache as the swap in synchronize layer
Current swap in synchronization mostly uses the swap_map's SWAP_HAS_CACHE bit. Whoever sets the bit first does the actual work to swap in a folio. This has been causing many issues as it's just a poor implementation of a bit lock. Raced users have no idea what is pinning a slot, so it has to loop with a schedule_timeout_uninterruptible(1), which is ugly and causes long-tailing or other performance issues. Besides, the abuse of SWAP_HAS_CACHE has been causing many other troubles for synchronization or maintenance. This is the first step to remove this bit completely. Now all swap in paths are using the swap cache, and both the swap cache and swap map are protected by the cluster lock. So we can just resolve the swap synchronization with the swap cache layer directly using the cluster lock and folio lock. Whoever inserts a folio in the swap cache first does the swap in work. And because folios are locked during swap operations, other raced swap operations will just wait on the folio lock. The SWAP_HAS_CACHE will be removed in later commit. For now, we still set it for some remaining users. But now we do the bit setting and swap cache folio adding in the same critical section, after swap cache is ready. No one will have to spin on the SWAP_HAS_CACHE bit anymore. This both simplifies the logic and should improve the performance, eliminating issues like the one solved in commit |
||
|
|
bc617c990e |
mm/shmem, swap: remove SWAP_MAP_SHMEM
The SWAP_MAP_SHMEM state was introduced in the commit |
||
|
|
8e689f8ea4 |
mm/swap: do not choose swap device according to numa node
Patch series "mm/swapfile.c: select swap devices of default priority round robin", v5. Currently, on system with multiple swap devices, swap allocation will select one swap device according to priority. The swap device with the highest priority will be chosen to allocate firstly. People can specify a priority from 0 to 32767 when swapon a swap device, or the system will set it from -2 then downwards by default. Meanwhile, on NUMA system, the swap device with node_id will be considered first on that NUMA node of the node_id. In the current code, an array of plist, swap_avail_heads[nid], is used to organize swap devices on each NUMA node. For each NUMA node, there is a plist organizing all swap devices. The 'prio' value in the plist is the negated value of the device's priority due to plist being sorted from low to high. The swap device owning one node_id will be promoted to the front position on that NUMA node, then other swap devices are put in order of their default priority. E.g I got a system with 8 NUMA nodes, and I setup 4 zram partition as swap devices. Current behaviour: their priorities will be(note that -1 is skipped): NAME TYPE SIZE USED PRIO /dev/zram0 partition 16G 0B -2 /dev/zram1 partition 16G 0B -3 /dev/zram2 partition 16G 0B -4 /dev/zram3 partition 16G 0B -5 And their positions in the 8 swap_avail_lists[nid] will be: swap_avail_lists[0]: /* node 0's available swap device list */ zram0 -> zram1 -> zram2 -> zram3 prio:1 prio:3 prio:4 prio:5 swap_avali_lists[1]: /* node 1's available swap device list */ zram1 -> zram0 -> zram2 -> zram3 prio:1 prio:2 prio:4 prio:5 swap_avail_lists[2]: /* node 2's available swap device list */ zram2 -> zram0 -> zram1 -> zram3 prio:1 prio:2 prio:3 prio:5 swap_avail_lists[3]: /* node 3's available swap device list */ zram3 -> zram0 -> zram1 -> zram2 prio:1 prio:2 prio:3 prio:4 swap_avail_lists[4-7]: /* node 4,5,6,7's available swap device list */ zram0 -> zram1 -> zram2 -> zram3 prio:2 prio:3 prio:4 prio:5 The adjustment for swap device with node_id intended to decrease the pressure of lock contention for one swap device by taking different swap device on different node. The adjustment was introduced in commit |
||
|
|
a983471cfc |
mm, swap: cleanup swap entry allocation parameter
We no longer need this GFP parameter after commit
|
||
|
|
8578e0c00d |
mm, swap: use the swap table for the swap cache and switch API
Introduce basic swap table infrastructures, which are now just a fixed-sized flat array inside each swap cluster, with access wrappers. Each cluster contains a swap table of 512 entries. Each table entry is an opaque atomic long. It could be in 3 types: a shadow type (XA_VALUE), a folio type (pointer), or NULL. In this first step, it only supports storing a folio or shadow, and it is a drop-in replacement for the current swap cache. Convert all swap cache users to use the new sets of APIs. Chris Li has been suggesting using a new infrastructure for swap cache for better performance, and that idea combined well with the swap table as the new backing structure. Now the lock contention range is reduced to 2M clusters, which is much smaller than the 64M address_space. And we can also drop the multiple address_space design. All the internal works are done with swap_cache_get_* helpers. Swap cache lookup is still lock-less like before, and the helper's contexts are same with original swap cache helpers. They still require a pin on the swap device to prevent the backing data from being freed. Swap cache updates are now protected by the swap cluster lock instead of the XArray lock. This is mostly handled internally, but new __swap_cache_* helpers require the caller to lock the cluster. So, a few new cluster access and locking helpers are also introduced. A fully cluster-based unified swap table can be implemented on top of this to take care of all count tracking and synchronization work, with dynamic allocation. It should reduce the memory usage while making the performance even better. Link: https://lkml.kernel.org/r/20250916160100.31545-12-ryncsn@gmail.com Co-developed-by: Chris Li <chrisl@kernel.org> Signed-off-by: Chris Li <chrisl@kernel.org> Signed-off-by: Kairui Song <kasong@tencent.com> Acked-by: Chris Li <chrisl@kernel.org> Suggested-by: Chris Li <chrisl@kernel.org> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Baoquan He <bhe@redhat.com> Cc: Barry Song <baohua@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@linux.alibaba.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kemeng Shi <shikemeng@huaweicloud.com> Cc: kernel test robot <oliver.sang@intel.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Nhat Pham <nphamcs@gmail.com> Cc: Yosry Ahmed <yosryahmed@google.com> Cc: Zi Yan <ziy@nvidia.com> Cc: SeongJae Park <sj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
|
0fcf8ef4fd |
mm, swap: tidy up swap device and cluster info helpers
swp_swap_info is the most commonly used helper for retrieving swap info. It has an internal check that may lead to a NULL return value, but almost none of its caller checks the return value, making the internal check pointless. In fact, most of these callers already ensured the entry is valid and never expect a NULL value. Tidy this up and improve the function names. If the caller can make sure the swap entry/type is valid and the device is pinned, use the new introduced __swap_entry_to_info/__swap_type_to_info instead. They have more debug sanity checks and lower overhead as they are inlined. Callers that may expect a NULL value should use swap_entry_to_info/swap_type_to_info instead. No feature change. The rearranged codes should have had no effect, or they should have been hitting NULL de-ref bugs already. Only some new sanity checks are added so potential issues may show up in debug build. The new helpers will be frequently used with swap table later when working with swap cache folios. A locked swap cache folio ensures the entries are valid and stable so these helpers are very helpful. Link: https://lkml.kernel.org/r/20250916160100.31545-8-ryncsn@gmail.com Signed-off-by: Kairui Song <kasong@tencent.com> Acked-by: Chris Li <chrisl@kernel.org> Reviewed-by: Barry Song <baohua@kernel.org> Acked-by: David Hildenbrand <david@redhat.com> Suggested-by: Chris Li <chrisl@kernel.org> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Baoquan He <bhe@redhat.com> Cc: "Huang, Ying" <ying.huang@linux.alibaba.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kemeng Shi <shikemeng@huaweicloud.com> Cc: kernel test robot <oliver.sang@intel.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Nhat Pham <nphamcs@gmail.com> Cc: Yosry Ahmed <yosryahmed@google.com> Cc: Zi Yan <ziy@nvidia.com> Cc: SeongJae Park <sj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
|
4522aed4ff |
mm, swap: rename and move some swap cluster definition and helpers
No feature change, move cluster related definitions and helpers to mm/swap.h, also tidy up and add a "swap_" prefix for cluster lock/unlock helpers, so they can be used outside of swap files. And while at it, add kerneldoc. Link: https://lkml.kernel.org/r/20250916160100.31545-7-ryncsn@gmail.com Signed-off-by: Kairui Song <kasong@tencent.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: Barry Song <baohua@kernel.org> Acked-by: Chris Li <chrisl@kernel.org> Acked-by: David Hildenbrand <david@redhat.com> Suggested-by: Chris Li <chrisl@kernel.org> Acked-by: Nhat Pham <nphamcs@gmail.com> Cc: Baoquan He <bhe@redhat.com> Cc: "Huang, Ying" <ying.huang@linux.alibaba.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kemeng Shi <shikemeng@huaweicloud.com> Cc: kernel test robot <oliver.sang@intel.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Yosry Ahmed <yosryahmed@google.com> Cc: Zi Yan <ziy@nvidia.com> Cc: SeongJae Park <sj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
|
bc9950b56f |
Merge branch 'mm-hotfixes-stable' into mm-stable in order to pick up
changes required by mm-stable material: hugetlb and damon. |
||
|
|
85b8cec150 |
mm: swap.h: Remove deleted field from comments
The comment for struct swap_info_struct.lock incorrectly mentions fields that have already been deleted from the structure. Update the comments to accurately reflect the current struct swap_info_struct. There is no functional change. Link: https://lkml.kernel.org/r/20250812-swap-scan-list-v3-2-6d73504d267b@kernel.org Signed-off-by: Chris Li <chrisl@kernel.org> Reviewed-by: Kairui Song <kasong@tencent.com> Acked-by: Nhat Pham <nphamcs@gmail.com> Reviewed-by: Barry Song <baohua@kernel.org> Cc: Baoquan He <bhe@redhat.com> Cc: "Huang, Ying" <ying.huang@linux.alibaba.com> Cc: Kemeng Shi <shikemeng@huaweicloud.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
|
913fff3145 |
mm, swap: remove fragment clusters counter
It was used for calculating the iteration number when the swap allocator wants to scan the whole fragment list. Now the allocator only scans one fragment cluster at a time, so no one uses this counter anymore. Remove it as a cleanup; the performance change is marginal: Build linux kernel using 10G ZRAM, make -j96, defconfig with 2G cgroup memory limit, on top of tmpfs, 64kB mTHP enabled: Before: sys time: 6278.45s After: sys time: 6176.34s Change to 8G ZRAM: Before: sys time: 5572.85s After: sys time: 5531.49s Link: https://lkml.kernel.org/r/20250806161748.76651-3-ryncsn@gmail.com Signed-off-by: Kairui Song <kasong@tencent.com> Reviewed-by: Nhat Pham <nphamcs@gmail.com> Acked-by: Chris Li <chrisl@kernel.org> Cc: Baoquan He <bhe@redhat.com> Cc: Barry Song <baohua@kernel.org> Cc: "Huang, Ying" <ying.huang@linux.alibaba.com> Cc: Kemeng Shi <shikemeng@huaweicloud.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
|
2da6de30e6 |
mm: folio_may_be_lru_cached() unless folio_test_large()
mm/swap.c and mm/mlock.c agree to drain any per-CPU batch as soon as a
large folio is added: so collect_longterm_unpinnable_folios() just wastes
effort when calling lru_add_drain[_all]() on a large folio.
But although there is good reason not to batch up PMD-sized folios, we
might well benefit from batching a small number of low-order mTHPs (though
unclear how that "small number" limitation will be implemented).
So ask if folio_may_be_lru_cached() rather than !folio_test_large(), to
insulate those particular checks from future change. Name preferred to
"folio_is_batchable" because large folios can well be put on a batch: it's
just the per-CPU LRU caches, drained much later, which need care.
Marked for stable, to counter the increase in lru_add_drain_all()s from
"mm/gup: check ref_count instead of lru before migration".
Link: https://lkml.kernel.org/r/57d2eaf8-3607-f318-e0c5-be02dce61ad0@google.com
Fixes:
|
||
|
|
3865301dc5 |
mm: optimize lru_note_cost() by adding lru_note_cost_unlock_irq()
Dropping a lock, just to demand it again for an afterthought, cannot be good if contended: convert lru_note_cost() to lru_note_cost_unlock_irq(). [hughd@google.com: delete unneeded comment] Link: https://lkml.kernel.org/r/dbf9352a-1ed9-a021-c0c7-9309ac73e174@google.com Link: https://lkml.kernel.org/r/21100102-51b6-79d5-03db-1bb7f97fa94c@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev> Tested-by: Roman Gushchin <roman.gushchin@linux.dev> Reviewed-by: Shakeel Butt <shakeel.butt@linux.dev> Cc: David Hildenbrand <david@redhat.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
|
b980077899 |
mm: introduce per-node proactive reclaim interface
This adds support for allowing proactive reclaim in general on a NUMA
system. A per-node interface extends support for beyond a memcg-specific
interface, respecting the current semantics of memory.reclaim: respecting
aging LRU and not supporting artificially triggering eviction on nodes
belonging to non-bottom tiers.
This patch allows userspace to do:
echo "512M swappiness=10" > /sys/devices/system/node/nodeX/reclaim
One of the premises for this is to semantically align as best as possible
with memory.reclaim. During a brief time memcg did support nodemask until
|
||
|
|
5bd3b163e3 |
mm: fix spelling issue in swap.h
recliam -> reclaim Link: https://lkml.kernel.org/r/20250702071235.212794-1-liuqiye2025@163.com Signed-off-by: Xuanye Liu <liuqiye2025@163.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
|
68a1436bde |
mm: add swappiness=max arg to memory.reclaim for only anon reclaim
Patch series "add max arg to swappiness in memory.reclaim and lru_gen", v4. This patchset adds max arg to swappiness in memory.reclaim and lru_gen for anon only proactive memory reclaim. With commit < |
||
|
|
06340b9270 |
mm: convert free_page_and_swap_cache() to free_folio_and_swap_cache()
free_page_and_swap_cache() takes a struct page pointer as input parameter, but it will immediately convert it to folio and all operations following within use folio instead of page. It makes more sense to pass in folio directly. Convert free_page_and_swap_cache() to free_folio_and_swap_cache() to consume folio directly. Link: https://lkml.kernel.org/r/20250416201720.41678-1-nifan.cxl@gmail.com Signed-off-by: Fan Ni <fan.ni@samsung.com> Acked-by: Davidlohr Bueso <dave@stgolabs.net> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Reviewed-by: Vishal Moola (Oracle) <vishal.moola@gmail.com> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Adam Manzanares <a.manzanares@samsung.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@kernel.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Luis Chamberalin <mcgrof@kernel.org> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
|
eb0ece1602 |
- The 6 patch series "Enable strict percpu address space checks" from
Uros Bizjak uses x86 named address space qualifiers to provide compile-time checking of percpu area accesses. This has caused a small amount of fallout - two or three issues were reported. In all cases the calling code was founf to be incorrect. - The 4 patch series "Some cleanup for memcg" from Chen Ridong implements some relatively monir cleanups for the memcontrol code. - The 17 patch series "mm: fixes for device-exclusive entries (hmm)" from David Hildenbrand fixes a boatload of issues which David found then using device-exclusive PTE entries when THP is enabled. More work is needed, but this makes thins better - our own HMM selftests now succeed. - The 2 patch series "mm: zswap: remove z3fold and zbud" from Yosry Ahmed remove the z3fold and zbud implementations. They have been deprecated for half a year and nobody has complained. - The 5 patch series "mm: further simplify VMA merge operation" from Lorenzo Stoakes implements numerous simplifications in this area. No runtime effects are anticipated. - The 4 patch series "mm/madvise: remove redundant mmap_lock operations from process_madvise()" from SeongJae Park rationalizes the locking in the madvise() implementation. Performance gains of 20-25% were observed in one MADV_DONTNEED microbenchmark. - The 12 patch series "Tiny cleanup and improvements about SWAP code" from Baoquan He contains a number of touchups to issues which Baoquan noticed when working on the swap code. - The 2 patch series "mm: kmemleak: Usability improvements" from Catalin Marinas implements a couple of improvements to the kmemleak user-visible output. - The 2 patch series "mm/damon/paddr: fix large folios access and schemes handling" from Usama Arif provides a couple of fixes for DAMON's handling of large folios. - The 3 patch series "mm/damon/core: fix wrong and/or useless damos_walk() behaviors" from SeongJae Park fixes a few issues with the accuracy of kdamond's walking of DAMON regions. - The 3 patch series "expose mapping wrprotect, fix fb_defio use" from Lorenzo Stoakes changes the interaction between framebuffer deferred-io and core MM. No functional changes are anticipated - this is preparatory work for the future removal of page structure fields. - The 4 patch series "mm/damon: add support for hugepage_size DAMOS filter" from Usama Arif adds a DAMOS filter which permits the filtering by huge page sizes. - The 4 patch series "mm: permit guard regions for file-backed/shmem mappings" from Lorenzo Stoakes extends the guard region feature from its present "anon mappings only" state. The feature now covers shmem and file-backed mappings. - The 4 patch series "mm: batched unmap lazyfree large folios during reclamation" from Barry Song cleans up and speeds up the unmapping for pte-mapped large folios. - The 18 patch series "reimplement per-vma lock as a refcount" from Suren Baghdasaryan puts the vm_lock back into the vma. Our reasons for pulling it out were largely bogus and that change made the code more messy. This patchset provides small (0-10%) improvements on one microbenchmark. - The 5 patch series "Docs/mm/damon: misc DAMOS filters documentation fixes and improves" from SeongJae Park does some maintenance work on the DAMON docs. - The 27 patch series "hugetlb/CMA improvements for large systems" from Frank van der Linden addresses a pile of issues which have been observed when using CMA on large machines. - The 2 patch series "mm/damon: introduce DAMOS filter type for unmapped pages" from SeongJae Park enables users of DMAON/DAMOS to filter my the page's mapped/unmapped status. - The 19 patch series "zsmalloc/zram: there be preemption" from Sergey Senozhatsky teaches zram to run its compression and decompression operations preemptibly. - The 12 patch series "selftests/mm: Some cleanups from trying to run them" from Brendan Jackman fixes a pile of unrelated issues which Brendan encountered while runnimg our selftests. - The 2 patch series "fs/proc/task_mmu: add guard region bit to pagemap" from Lorenzo Stoakes permits userspace to use /proc/pid/pagemap to determine whether a particular page is a guard page. - The 7 patch series "mm, swap: remove swap slot cache" from Kairui Song removes the swap slot cache from the allocation path - it simply wasn't being effective. - The 5 patch series "mm: cleanups for device-exclusive entries (hmm)" from David Hildenbrand implements a number of unrelated cleanups in this code. - The 5 patch series "mm: Rework generic PTDUMP configs" from Anshuman Khandual implements a number of preparatoty cleanups to the GENERIC_PTDUMP Kconfig logic. - The 8 patch series "mm/damon: auto-tune aggregation interval" from SeongJae Park implements a feedback-driven automatic tuning feature for DAMON's aggregation interval tuning. - The 5 patch series "Fix lazy mmu mode" from Ryan Roberts fixes some issues in powerpc, sparc and x86 lazy MMU implementations. Ryan did this in preparation for implementing lazy mmu mode for arm64 to optimize vmalloc. - The 2 patch series "mm/page_alloc: Some clarifications for migratetype fallback" from Brendan Jackman reworks some commentary to make the code easier to follow. - The 3 patch series "page_counter cleanup and size reduction" from Shakeel Butt cleans up the page_counter code and fixes a size increase which we accidentally added late last year. - The 3 patch series "Add a command line option that enables control of how many threads should be used to allocate huge pages" from Thomas Prescher does that. It allows the careful operator to significantly reduce boot time by tuning the parallalization of huge page initialization. - The 3 patch series "Fix calculations in trace_balance_dirty_pages() for cgwb" from Tang Yizhou fixes the tracing output from the dirty page balancing code. - The 9 patch series "mm/damon: make allow filters after reject filters useful and intuitive" from SeongJae Park improves the handling of allow and reject filters. Behaviour is made more consistent and the documention is updated accordingly. - The 5 patch series "Switch zswap to object read/write APIs" from Yosry Ahmed updates zswap to the new object read/write APIs and thus permits the removal of some legacy code from zpool and zsmalloc. - The 6 patch series "Some trivial cleanups for shmem" from Baolin Wang does as it claims. - The 20 patch series "fs/dax: Fix ZONE_DEVICE page reference counts" from Alistair Popple regularizes the weird ZONE_DEVICE page refcount handling in DAX, permittig the removal of a number of special-case checks. - The 4 patch series "refactor mremap and fix bug" from Lorenzo Stoakes is a preparatoty refactoring and cleanup of the mremap() code. - The 20 patch series "mm: MM owner tracking for large folios (!hugetlb) + CONFIG_NO_PAGE_MAPCOUNT" from David Hildenbrand reworks the manner in which we determine whether a large folio is known to be mapped exclusively into a single MM. - The 8 patch series "mm/damon: add sysfs dirs for managing DAMOS filters based on handling layers" from SeongJae Park adds a couple of new sysfs directories to ease the management of DAMON/DAMOS filters. - The 13 patch series "arch, mm: reduce code duplication in mem_init()" from Mike Rapoport consolidates many per-arch implementations of mem_init() into code generic code, where that is practical. - The 13 patch series "mm/damon/sysfs: commit parameters online via damon_call()" from SeongJae Park continues the cleaning up of sysfs access to DAMON internal data. - The 3 patch series "mm: page_ext: Introduce new iteration API" from Luiz Capitulino reworks the page_ext initialization to fix a boot-time crash which was observed with an unusual combination of compile and cmdline options. - The 8 patch series "Buddy allocator like (or non-uniform) folio split" from Zi Yan reworks the code to split a folio into smaller folios. The main benefit is lessened memory consumption: fewer post-split folios are generated. - The 2 patch series "Minimize xa_node allocation during xarry split" from Zi Yan reduces the number of xarray xa_nodes which are generated during an xarray split. - The 2 patch series "drivers/base/memory: Two cleanups" from Gavin Shan performs some maintenance work on the drivers/base/memory code. - The 3 patch series "Add tracepoints for lowmem reserves, watermarks and totalreserve_pages" from Martin Liu adds some more tracepoints to the page allocator code. - The 4 patch series "mm/madvise: cleanup requests validations and classifications" from SeongJae Park cleans up some warts which SeongJae observed during his earlier madvise work. - The 3 patch series "mm/hwpoison: Fix regressions in memory failure handling" from Shuai Xue addresses two quite serious regressions which Shuai has observed in the memory-failure implementation. - The 5 patch series "mm: reliable huge page allocator" from Johannes Weiner makes huge page allocations cheaper and more reliable by reducing fragmentation. - The 5 patch series "Minor memcg cleanups & prep for memdescs" from Matthew Wilcox is preparatory work for the future implementation of memdescs. - The 4 patch series "track memory used by balloon drivers" from Nico Pache introduces a way to track memory used by our various balloon drivers. - The 2 patch series "mm/damon: introduce DAMOS filter type for active pages" from Nhat Pham permits users to filter for active/inactive pages, separately for file and anon pages. - The 2 patch series "Adding Proactive Memory Reclaim Statistics" from Hao Jia separates the proactive reclaim statistics from the direct reclaim statistics. - The 2 patch series "mm/vmscan: don't try to reclaim hwpoison folio" from Jinjiang Tu fixes our handling of hwpoisoned pages within the reclaim code. -----BEGIN PGP SIGNATURE----- iHQEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZ+nZaAAKCRDdBJ7gKXxA jsOWAPiP4r7CJHMZRK4eyJOkvS1a1r+TsIarrFZtjwvf/GIfAQCEG+JDxVfUaUSF Ee93qSSLR1BkNdDw+931Pu0mXfbnBw== =Pn2K -----END PGP SIGNATURE----- Merge tag 'mm-stable-2025-03-30-16-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: - The series "Enable strict percpu address space checks" from Uros Bizjak uses x86 named address space qualifiers to provide compile-time checking of percpu area accesses. This has caused a small amount of fallout - two or three issues were reported. In all cases the calling code was found to be incorrect. - The series "Some cleanup for memcg" from Chen Ridong implements some relatively monir cleanups for the memcontrol code. - The series "mm: fixes for device-exclusive entries (hmm)" from David Hildenbrand fixes a boatload of issues which David found then using device-exclusive PTE entries when THP is enabled. More work is needed, but this makes thins better - our own HMM selftests now succeed. - The series "mm: zswap: remove z3fold and zbud" from Yosry Ahmed remove the z3fold and zbud implementations. They have been deprecated for half a year and nobody has complained. - The series "mm: further simplify VMA merge operation" from Lorenzo Stoakes implements numerous simplifications in this area. No runtime effects are anticipated. - The series "mm/madvise: remove redundant mmap_lock operations from process_madvise()" from SeongJae Park rationalizes the locking in the madvise() implementation. Performance gains of 20-25% were observed in one MADV_DONTNEED microbenchmark. - The series "Tiny cleanup and improvements about SWAP code" from Baoquan He contains a number of touchups to issues which Baoquan noticed when working on the swap code. - The series "mm: kmemleak: Usability improvements" from Catalin Marinas implements a couple of improvements to the kmemleak user-visible output. - The series "mm/damon/paddr: fix large folios access and schemes handling" from Usama Arif provides a couple of fixes for DAMON's handling of large folios. - The series "mm/damon/core: fix wrong and/or useless damos_walk() behaviors" from SeongJae Park fixes a few issues with the accuracy of kdamond's walking of DAMON regions. - The series "expose mapping wrprotect, fix fb_defio use" from Lorenzo Stoakes changes the interaction between framebuffer deferred-io and core MM. No functional changes are anticipated - this is preparatory work for the future removal of page structure fields. - The series "mm/damon: add support for hugepage_size DAMOS filter" from Usama Arif adds a DAMOS filter which permits the filtering by huge page sizes. - The series "mm: permit guard regions for file-backed/shmem mappings" from Lorenzo Stoakes extends the guard region feature from its present "anon mappings only" state. The feature now covers shmem and file-backed mappings. - The series "mm: batched unmap lazyfree large folios during reclamation" from Barry Song cleans up and speeds up the unmapping for pte-mapped large folios. - The series "reimplement per-vma lock as a refcount" from Suren Baghdasaryan puts the vm_lock back into the vma. Our reasons for pulling it out were largely bogus and that change made the code more messy. This patchset provides small (0-10%) improvements on one microbenchmark. - The series "Docs/mm/damon: misc DAMOS filters documentation fixes and improves" from SeongJae Park does some maintenance work on the DAMON docs. - The series "hugetlb/CMA improvements for large systems" from Frank van der Linden addresses a pile of issues which have been observed when using CMA on large machines. - The series "mm/damon: introduce DAMOS filter type for unmapped pages" from SeongJae Park enables users of DMAON/DAMOS to filter my the page's mapped/unmapped status. - The series "zsmalloc/zram: there be preemption" from Sergey Senozhatsky teaches zram to run its compression and decompression operations preemptibly. - The series "selftests/mm: Some cleanups from trying to run them" from Brendan Jackman fixes a pile of unrelated issues which Brendan encountered while runnimg our selftests. - The series "fs/proc/task_mmu: add guard region bit to pagemap" from Lorenzo Stoakes permits userspace to use /proc/pid/pagemap to determine whether a particular page is a guard page. - The series "mm, swap: remove swap slot cache" from Kairui Song removes the swap slot cache from the allocation path - it simply wasn't being effective. - The series "mm: cleanups for device-exclusive entries (hmm)" from David Hildenbrand implements a number of unrelated cleanups in this code. - The series "mm: Rework generic PTDUMP configs" from Anshuman Khandual implements a number of preparatoty cleanups to the GENERIC_PTDUMP Kconfig logic. - The series "mm/damon: auto-tune aggregation interval" from SeongJae Park implements a feedback-driven automatic tuning feature for DAMON's aggregation interval tuning. - The series "Fix lazy mmu mode" from Ryan Roberts fixes some issues in powerpc, sparc and x86 lazy MMU implementations. Ryan did this in preparation for implementing lazy mmu mode for arm64 to optimize vmalloc. - The series "mm/page_alloc: Some clarifications for migratetype fallback" from Brendan Jackman reworks some commentary to make the code easier to follow. - The series "page_counter cleanup and size reduction" from Shakeel Butt cleans up the page_counter code and fixes a size increase which we accidentally added late last year. - The series "Add a command line option that enables control of how many threads should be used to allocate huge pages" from Thomas Prescher does that. It allows the careful operator to significantly reduce boot time by tuning the parallalization of huge page initialization. - The series "Fix calculations in trace_balance_dirty_pages() for cgwb" from Tang Yizhou fixes the tracing output from the dirty page balancing code. - The series "mm/damon: make allow filters after reject filters useful and intuitive" from SeongJae Park improves the handling of allow and reject filters. Behaviour is made more consistent and the documention is updated accordingly. - The series "Switch zswap to object read/write APIs" from Yosry Ahmed updates zswap to the new object read/write APIs and thus permits the removal of some legacy code from zpool and zsmalloc. - The series "Some trivial cleanups for shmem" from Baolin Wang does as it claims. - The series "fs/dax: Fix ZONE_DEVICE page reference counts" from Alistair Popple regularizes the weird ZONE_DEVICE page refcount handling in DAX, permittig the removal of a number of special-case checks. - The series "refactor mremap and fix bug" from Lorenzo Stoakes is a preparatoty refactoring and cleanup of the mremap() code. - The series "mm: MM owner tracking for large folios (!hugetlb) + CONFIG_NO_PAGE_MAPCOUNT" from David Hildenbrand reworks the manner in which we determine whether a large folio is known to be mapped exclusively into a single MM. - The series "mm/damon: add sysfs dirs for managing DAMOS filters based on handling layers" from SeongJae Park adds a couple of new sysfs directories to ease the management of DAMON/DAMOS filters. - The series "arch, mm: reduce code duplication in mem_init()" from Mike Rapoport consolidates many per-arch implementations of mem_init() into code generic code, where that is practical. - The series "mm/damon/sysfs: commit parameters online via damon_call()" from SeongJae Park continues the cleaning up of sysfs access to DAMON internal data. - The series "mm: page_ext: Introduce new iteration API" from Luiz Capitulino reworks the page_ext initialization to fix a boot-time crash which was observed with an unusual combination of compile and cmdline options. - The series "Buddy allocator like (or non-uniform) folio split" from Zi Yan reworks the code to split a folio into smaller folios. The main benefit is lessened memory consumption: fewer post-split folios are generated. - The series "Minimize xa_node allocation during xarry split" from Zi Yan reduces the number of xarray xa_nodes which are generated during an xarray split. - The series "drivers/base/memory: Two cleanups" from Gavin Shan performs some maintenance work on the drivers/base/memory code. - The series "Add tracepoints for lowmem reserves, watermarks and totalreserve_pages" from Martin Liu adds some more tracepoints to the page allocator code. - The series "mm/madvise: cleanup requests validations and classifications" from SeongJae Park cleans up some warts which SeongJae observed during his earlier madvise work. - The series "mm/hwpoison: Fix regressions in memory failure handling" from Shuai Xue addresses two quite serious regressions which Shuai has observed in the memory-failure implementation. - The series "mm: reliable huge page allocator" from Johannes Weiner makes huge page allocations cheaper and more reliable by reducing fragmentation. - The series "Minor memcg cleanups & prep for memdescs" from Matthew Wilcox is preparatory work for the future implementation of memdescs. - The series "track memory used by balloon drivers" from Nico Pache introduces a way to track memory used by our various balloon drivers. - The series "mm/damon: introduce DAMOS filter type for active pages" from Nhat Pham permits users to filter for active/inactive pages, separately for file and anon pages. - The series "Adding Proactive Memory Reclaim Statistics" from Hao Jia separates the proactive reclaim statistics from the direct reclaim statistics. - The series "mm/vmscan: don't try to reclaim hwpoison folio" from Jinjiang Tu fixes our handling of hwpoisoned pages within the reclaim code. * tag 'mm-stable-2025-03-30-16-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (431 commits) mm/page_alloc: remove unnecessary __maybe_unused in order_to_pindex() x86/mm: restore early initialization of high_memory for 32-bits mm/vmscan: don't try to reclaim hwpoison folio mm/hwpoison: introduce folio_contain_hwpoisoned_page() helper cgroup: docs: add pswpin and pswpout items in cgroup v2 doc mm: vmscan: split proactive reclaim statistics from direct reclaim statistics selftests/mm: speed up split_huge_page_test selftests/mm: uffd-unit-tests support for hugepages > 2M docs/mm/damon/design: document active DAMOS filter type mm/damon: implement a new DAMOS filter type for active pages fs/dax: don't disassociate zero page entries MM documentation: add "Unaccepted" meminfo entry selftests/mm: add commentary about 9pfs bugs fork: use __vmalloc_node() for stack allocation docs/mm: Physical Memory: Populate the "Zones" section xen: balloon: update the NR_BALLOON_PAGES state hv_balloon: update the NR_BALLOON_PAGES state balloon_compaction: update the NR_BALLOON_PAGES state meminfo: add a per node counter for balloon drivers mm: remove references to folio in __memcg_kmem_uncharge_page() ... |
||
|
|
b487a2da35 |
mm, swap: simplify folio swap allocation
With slot cache gone, clean up the allocation helpers even more. folio_alloc_swap will be the only entry for allocation and adding the folio to swap cache (except suspend), making it opposite of folio_free_swap. Link: https://lkml.kernel.org/r/20250313165935.63303-8-ryncsn@gmail.com Signed-off-by: Kairui Song <kasong@tencent.com> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Baoquan He <bhe@redhat.com> Cc: Barry Song <v-songbaohua@oppo.com> Cc: Chris Li <chrisl@kernel.org> Cc: "Huang, Ying" <ying.huang@linux.alibaba.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Matthew Wilcow (Oracle) <willy@infradead.org> Cc: Nhat Pham <nphamcs@gmail.com> Cc: Yosry Ahmed <yosryahmed@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
|
0ff67f990b |
mm, swap: remove swap slot cache
Slot cache is no longer needed now, removing it and all related code.
- vm-scalability with: `usemem --init-time -O -y -x -R -31 1G`,
12G memory cgroup using simulated pmem as SWAP (32G pmem, 32 CPUs),
16 test runs for each case, measuring the total throughput:
Before (KB/s) (stdev) After (KB/s) (stdev)
Random (4K): 424907.60 (24410.78) 414745.92 (34554.78)
Random (64K): 163308.82 (11635.72) 167314.50 (18434.99)
Sequential (4K, !-R): 6150056.79 (103205.90) 6321469.06 (115878.16)
The performance changes are below noise level.
- Build linux kernel with make -j96, using 4K folio with 1.5G memory
cgroup limit and 64K folio with 2G memory cgroup limit, on top of tmpfs,
12 test runs, measuring the system time:
Before (s) (stdev) After (s) (stdev)
make -j96 (4K): 6445.69 (61.95) 6408.80 (69.46)
make -j96 (64K): 6841.71 (409.04) 6437.99 (435.55)
Similar to above, 64k mTHP case showed a slight improvement.
Link: https://lkml.kernel.org/r/20250313165935.63303-7-ryncsn@gmail.com
Signed-off-by: Kairui Song <kasong@tencent.com>
Reviewed-by: Baoquan He <bhe@redhat.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <v-songbaohua@oppo.com>
Cc: Chris Li <chrisl@kernel.org>
Cc: "Huang, Ying" <ying.huang@linux.alibaba.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Matthew Wilcow (Oracle) <willy@infradead.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
||
|
|
1b7e90020e |
mm, swap: use percpu cluster as allocation fast path
Current allocation workflow first traverses the plist with a global lock held, after choosing a device, it uses the percpu cluster on that swap device. This commit moves the percpu cluster variable out of being tied to individual swap devices, making it a global percpu variable, and will be used directly for allocation as a fast path. The global percpu cluster variable will never point to a HDD device, and allocations on a HDD device are still globally serialized. This improves the allocator performance and prepares for removal of the slot cache in later commits. There shouldn't be much observable behavior change, except one thing: this changes how swap device allocation rotation works. Currently, each allocation will rotate the plist, and because of the existence of slot cache (one order 0 allocation usually returns 64 entries), swap devices of the same priority are rotated for every 64 order 0 entries consumed. High order allocations are different, they will bypass the slot cache, and so swap device is rotated for every 16K, 32K, or up to 2M allocation. The rotation rule was never clearly defined or documented, it was changed several times without mentioning. After this commit, and once slot cache is gone in later commits, swap device rotation will happen for every consumed cluster. Ideally non-HDD devices will be rotated if 2M space has been consumed for each order. Fragmented clusters will rotate the device faster, which seems OK. HDD devices is rotated for every allocation regardless of the allocation order, which should be OK too and trivial. This commit also slightly changes allocation behaviour for slot cache. The new added cluster allocation fast path may allocate entries from different device to the slot cache, this is not observable from user space, only impact performance very slightly, and slot cache will be just gone in next commit, so this can be ignored. Link: https://lkml.kernel.org/r/20250313165935.63303-6-ryncsn@gmail.com Signed-off-by: Kairui Song <kasong@tencent.com> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Baoquan He <bhe@redhat.com> Cc: Barry Song <v-songbaohua@oppo.com> Cc: Chris Li <chrisl@kernel.org> Cc: "Huang, Ying" <ying.huang@linux.alibaba.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Matthew Wilcow (Oracle) <willy@infradead.org> Cc: Nhat Pham <nphamcs@gmail.com> Cc: Yosry Ahmed <yosryahmed@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
|
c523aa8907 |
mm/swap: rename swap_swapcount() to swap_entry_swapped()
The new function name can reflect the real behaviour of the function more clearly and more accurately. And the renaming avoids the confusion between swap_swapcount() and swp_swapcount(). Link: https://lkml.kernel.org/r/20250205092721.9395-11-bhe@redhat.com Signed-off-by: Baoquan He <bhe@redhat.com> Cc: Chris Li <chrisl@kernel.org> Cc: Kairui Song <ryncsn@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
|
0eb7d2c337 |
mm/swap: remove SWAP_FLAG_PRIO_SHIFT
It doesn't make sense to have a zero value of shift. Remove it to avoid confusion. Link: https://lkml.kernel.org/r/20250205092721.9395-4-bhe@redhat.com Signed-off-by: Baoquan He <bhe@redhat.com> Cc: Chris Li <chrisl@kernel.org> Cc: Kairui Song <ryncsn@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
|
c25465eb76 |
mm: use single SWP_DEVICE_EXCLUSIVE entry type
There is no need for the distinction anymore; let's merge the readable and writable device-exclusive entries into a single device-exclusive entry type. Link: https://lkml.kernel.org/r/20250210193801.781278-7-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Simona Vetter <simona.vetter@ffwll.ch> Reviewed-by: Alistair Popple <apopple@nvidia.com> Tested-by: Alistair Popple <apopple@nvidia.com> Cc: Alex Shi <alexs@kernel.org> Cc: Danilo Krummrich <dakr@kernel.org> Cc: Dave Airlie <airlied@gmail.com> Cc: Jann Horn <jannh@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Karol Herbst <kherbst@redhat.com> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Lyude <lyude@redhat.com> Cc: "Masami Hiramatsu (Google)" <mhiramat@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Pasha Tatashin <pasha.tatashin@soleen.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: SeongJae Park <sj@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yanteng Si <si.yanteng@linux.dev> Cc: Barry Song <v-songbaohua@oppo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
|
89ce924f0b |
mm: memcontrol: move memsw charge callbacks to v1
The interweaving of two entirely different swap accounting strategies has been one of the more confusing parts of the memcg code. Split out the v1 code to clarify the implementation and a handful of callsites, and to avoid building the v1 bits when !CONFIG_MEMCG_V1. text data bss dec hex filename 39253 6446 4160 49859 c2c3 mm/memcontrol.o.old 38877 6382 4160 49419 c10b mm/memcontrol.o Link: https://lkml.kernel.org/r/20250124054132.45643-1-hannes@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Roman Gushchin <roman.gushchin@linux.dev> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Balbir Singh <balbirs@nvidia.com> Acked-by: Shakeel Butt <shakeel.butt@linux.dev> Cc: Muchun Song <muchun.song@linux.dev> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
|
538d5baacd |
mm: vmscan: move vmscan sysctls to mm/vmscan.c
This moves vm_swappiness and zone_reclaim_mode to mm/vmscan.c, as part of the kernel/sysctl.c cleaning, also moves some external variable declarations and function declarations from include/linux/swap.h into mm/internal.h. Signed-off-by: Kaixiong Yu <yukaixiong@huawei.com> Reviewed-by: Kees Cook <kees@kernel.org> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Joel Granados <joel.granados@kernel.org> |
||
|
|
1c7b17cf05 |
mm/vmscan: fix hard LOCKUP in function isolate_lru_folios
This fixes the following hard lockup in isolate_lru_folios() during memory
reclaim. If the LRU mostly contains ineligible folios this may trigger
watchdog.
watchdog: Watchdog detected hard LOCKUP on cpu 173
RIP: 0010:native_queued_spin_lock_slowpath+0x255/0x2a0
Call Trace:
_raw_spin_lock_irqsave+0x31/0x40
folio_lruvec_lock_irqsave+0x5f/0x90
folio_batch_move_lru+0x91/0x150
lru_add_drain_per_cpu+0x1c/0x40
process_one_work+0x17d/0x350
worker_thread+0x27b/0x3a0
kthread+0xe8/0x120
ret_from_fork+0x34/0x50
ret_from_fork_asm+0x1b/0x30
lruvec->lru_lock owner:
PID: 2865 TASK: ffff888139214d40 CPU: 40 COMMAND: "kswapd0"
#0 [fffffe0000945e60] crash_nmi_callback at ffffffffa567a555
#1 [fffffe0000945e68] nmi_handle at ffffffffa563b171
#2 [fffffe0000945eb0] default_do_nmi at ffffffffa6575920
#3 [fffffe0000945ed0] exc_nmi at ffffffffa6575af4
#4 [fffffe0000945ef0] end_repeat_nmi at ffffffffa6601dde
[exception RIP: isolate_lru_folios+403]
RIP: ffffffffa597df53 RSP: ffffc90006fb7c28 RFLAGS: 00000002
RAX: 0000000000000001 RBX: ffffc90006fb7c60 RCX: ffffea04a2196f88
RDX: ffffc90006fb7c60 RSI: ffffc90006fb7c60 RDI: ffffea04a2197048
RBP: ffff88812cbd3010 R8: ffffea04a2197008 R9: 0000000000000001
R10: 0000000000000000 R11: 0000000000000001 R12: ffffea04a2197008
R13: ffffea04a2197048 R14: ffffc90006fb7de8 R15: 0000000003e3e937
ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018
<NMI exception stack>
#5 [ffffc90006fb7c28] isolate_lru_folios at ffffffffa597df53
#6 [ffffc90006fb7cf8] shrink_active_list at ffffffffa597f788
#7 [ffffc90006fb7da8] balance_pgdat at ffffffffa5986db0
#8 [ffffc90006fb7ec0] kswapd at ffffffffa5987354
#9 [ffffc90006fb7ef8] kthread at ffffffffa5748238
crash>
Scenario:
User processe are requesting a large amount of memory and keep page active.
Then a module continuously requests memory from ZONE_DMA32 area.
Memory reclaim will be triggered due to ZONE_DMA32 watermark alarm reached.
However pages in the LRU(active_anon) list are mostly from
the ZONE_NORMAL area.
Reproduce:
Terminal 1: Construct to continuously increase pages active(anon).
mkdir /tmp/memory
mount -t tmpfs -o size=1024000M tmpfs /tmp/memory
dd if=/dev/zero of=/tmp/memory/block bs=4M
tail /tmp/memory/block
Terminal 2:
vmstat -a 1
active will increase.
procs ---memory--- ---swap-- ---io---- -system-- ---cpu--- ...
r b swpd free inact active si so bi bo
1 0 0 1445623076 45898836 83646008 0 0 0
1 0 0 1445623076 43450228 86094616 0 0 0
1 0 0 1445623076 41003480 88541364 0 0 0
1 0 0 1445623076 38557088 90987756 0 0 0
1 0 0 1445623076 36109688 93435156 0 0 0
1 0 0 1445619552 33663256 95881632 0 0 0
1 0 0 1445619804 31217140 98327792 0 0 0
1 0 0 1445619804 28769988 100774944 0 0 0
1 0 0 1445619804 26322348 103222584 0 0 0
1 0 0 1445619804 23875592 105669340 0 0 0
cat /proc/meminfo | head
Active(anon) increase.
MemTotal: 1579941036 kB
MemFree: 1445618500 kB
MemAvailable: 1453013224 kB
Buffers: 6516 kB
Cached: 128653956 kB
SwapCached: 0 kB
Active: 118110812 kB
Inactive: 11436620 kB
Active(anon): 115345744 kB
Inactive(anon): 945292 kB
When the Active(anon) is 115345744 kB, insmod module triggers
the ZONE_DMA32 watermark.
perf record -e vmscan:mm_vmscan_lru_isolate -aR
perf script
isolate_mode=0 classzone=1 order=1 nr_requested=32 nr_scanned=2
nr_skipped=2 nr_taken=0 lru=active_anon
isolate_mode=0 classzone=1 order=1 nr_requested=32 nr_scanned=0
nr_skipped=0 nr_taken=0 lru=active_anon
isolate_mode=0 classzone=1 order=0 nr_requested=32 nr_scanned=28835844
nr_skipped=28835844 nr_taken=0 lru=active_anon
isolate_mode=0 classzone=1 order=1 nr_requested=32 nr_scanned=28835844
nr_skipped=28835844 nr_taken=0 lru=active_anon
isolate_mode=0 classzone=1 order=0 nr_requested=32 nr_scanned=29
nr_skipped=29 nr_taken=0 lru=active_anon
isolate_mode=0 classzone=1 order=0 nr_requested=32 nr_scanned=0
nr_skipped=0 nr_taken=0 lru=active_anon
See nr_scanned=28835844.
28835844 * 4k = 115343376KB approximately equal to 115345744 kB.
If increase Active(anon) to 1000G then insmod module triggers
the ZONE_DMA32 watermark. hard lockup will occur.
In my device nr_scanned = 0000000003e3e937 when hard lockup.
Convert to memory size 0x0000000003e3e937 * 4KB = 261072092 KB.
[ffffc90006fb7c28] isolate_lru_folios at ffffffffa597df53
ffffc90006fb7c30: 0000000000000020 0000000000000000
ffffc90006fb7c40: ffffc90006fb7d40 ffff88812cbd3000
ffffc90006fb7c50: ffffc90006fb7d30 0000000106fb7de8
ffffc90006fb7c60: ffffea04a2197008 ffffea0006ed4a48
ffffc90006fb7c70: 0000000000000000 0000000000000000
ffffc90006fb7c80: 0000000000000000 0000000000000000
ffffc90006fb7c90: 0000000000000000 0000000000000000
ffffc90006fb7ca0: 0000000000000000 0000000003e3e937
ffffc90006fb7cb0: 0000000000000000 0000000000000000
ffffc90006fb7cc0: 8d7c0b56b7874b00 ffff88812cbd3000
About the Fixes:
Why did it take eight years to be discovered?
The problem requires the following conditions to occur:
1. The device memory should be large enough.
2. Pages in the LRU(active_anon) list are mostly from the ZONE_NORMAL area.
3. The memory in ZONE_DMA32 needs to reach the watermark.
If the memory is not large enough, or if the usage design of ZONE_DMA32
area memory is reasonable, this problem is difficult to detect.
notes:
The problem is most likely to occur in ZONE_DMA32 and ZONE_NORMAL,
but other suitable scenarios may also trigger the problem.
Link: https://lkml.kernel.org/r/20241119060842.274072-1-liuye@kylinos.cn
Fixes:
|
||
|
|
bae8a4ef3e |
mm, swap: use a global swap cluster for non-rotation devices
Non-rotational devices (SSD / ZRAM) can tolerate fragmentation, so the goal of the SWAP allocator is to avoid contention for clusters. It uses a per-CPU cluster design, and each CPU will use a different cluster as much as possible. However, HDDs are very sensitive to fragmentation, contention is trivial in comparison. Therefore, we use one global cluster instead. This ensures that each order will be written to the same cluster as much as possible, which helps make the I/O more continuous. This ensures that the performance of the cluster allocator is as good as that of the old allocator. Tests after this commit compared to those before this series: Tested using 'make -j32' with tinyconfig, a 1G memcg limit, and HDD swap: make -j32 with tinyconfig, using 1G memcg limit and HDD swap: Before this series: 114.44user 29.11system 39:42.90elapsed 6%CPU (0avgtext+0avgdata 157284maxresident)k 2901232inputs+0outputs (238877major+4227640minor)pagefaults After this commit: 113.90user 23.81system 38:11.77elapsed 6%CPU (0avgtext+0avgdata 157260maxresident)k 2548728inputs+0outputs (235471major+4238110minor)pagefaults [ryncsn@gmail.com: check kmalloc() return in setup_clusters] Link: https://lkml.kernel.org/r/CAMgjq7Au+o04ckHyT=iU-wVx9az=t0B-ZiC5E0bDqNrAtNOP-g@mail.gmail.com Link: https://lkml.kernel.org/r/20250113175732.48099-13-ryncsn@gmail.com Signed-off-by: Kairui Song <kasong@tencent.com> Suggested-by: Chris Li <chrisl@kernel.org> Cc: Baoquan He <bhe@redhat.com> Cc: Barry Song <v-songbaohua@oppo.com> Cc: "Huang, Ying" <ying.huang@linux.alibaba.com> Cc: Hugh Dickens <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Nhat Pham <nphamcs@gmail.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Yosry Ahmed <yosryahmed@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
|
e3ae2dec84 |
mm, swap: simplify percpu cluster updating
Instead of using a returning argument, we can simply store the next cluster offset to the fixed percpu location, which reduce the stack usage and simplify the function: Object size: ./scripts/bloat-o-meter mm/swapfile.o mm/swapfile.o.new add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-271 (-271) Function old new delta get_swap_pages 2847 2733 -114 alloc_swap_scan_cluster 894 737 -157 Total: Before=30833, After=30562, chg -0.88% Stack usage: Before: swapfile.c:1190:5:get_swap_pages 240 static After: swapfile.c:1185:5:get_swap_pages 216 static Link: https://lkml.kernel.org/r/20250113175732.48099-11-ryncsn@gmail.com Signed-off-by: Kairui Song <kasong@tencent.com> Cc: Baoquan He <bhe@redhat.com> Cc: Barry Song <v-songbaohua@oppo.com> Cc: Chis Li <chrisl@kernel.org> Cc: "Huang, Ying" <ying.huang@linux.alibaba.com> Cc: Hugh Dickens <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Nhat Pham <nphamcs@gmail.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Yosry Ahmed <yosryahmed@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
|
3b644773ee |
mm, swap: reduce contention on device lock
Currently, swap locking is mainly composed of two locks: the cluster lock
(ci->lock) and the device lock (si->lock).
The cluster lock is much more fine-grained, so it is best to use ci->lock
instead of si->lock as much as possible.
We have cleaned up other hard dependencies on si->lock. Following the new
cluster allocator design, most operations don't need to touch si->lock at
all. In practice, we only need to take si->lock when moving clusters
between lists.
To achieve this, this commit reworks the locking pattern of all si->lock
and ci->lock users, eliminates all usage of ci->lock inside si->lock, and
introduces a new design to avoid touching si->lock unless needed.
For minimal contention and easier understanding of the system, two ideas
are introduced with the corresponding helpers: isolation and relocation.
- Clusters will be `isolated` from the list when iterating the list
to search for an allocatable cluster.
This ensures other CPUs won't walk into the same cluster easily,
and it releases si->lock after acquiring ci->lock, providing the
only place that handles the inversion of two locks, and avoids
contention.
Iterating the cluster list almost always moves the cluster
(free -> nonfull, nonfull -> frag, frag -> frag tail), but it
doesn't know where the cluster should be moved to until scanning
is done. So keeping the cluster off-list is a good option with
low overhead.
The off-list time window of a cluster is also minimal. In the worst
case, one CPU will return the cluster after scanning the 512 entries
on it, which we used to busy wait with a spin lock.
This is done with the new helper `isolate_lock_cluster`.
- Clusters will be `relocated` after allocation or freeing, according
to their usage count and status.
Allocations no longer hold si->lock now, and may drop ci->lock for
reclaim, so the cluster could be moved to any location while no lock
is held. Besides, isolation clears all flags when it takes the
cluster off the list (the flags must be in sync with the list status,
so cluster users don't need to touch si->lock for checking its list
status). So the cluster has to be relocated to the right list
according to its usage after allocation or freeing.
Relocation is optional, if the cluster flags indicate it's already
on the right list, it will skip touching the list or si->lock.
This is done with `relocate_cluster` after allocation or with
`[partial_]free_cluster` after freeing.
This handled usage of all kinds of clusters in a clean way.
Scanning and allocation by iterating the cluster list is handled by
"isolate - <scan / allocate> - relocate".
Scanning and allocation of per-CPU clusters will only involve
"<scan / allocate> - relocate", as it knows which cluster to lock
and use.
Freeing will only involve "relocate".
Each CPU will keep using its per-CPU cluster until the 512 entries
are all consumed. Freeing also has to free 512 entries to trigger
cluster movement in the best case, so si->lock is rarely touched.
Testing with building the Linux kernel with defconfig showed huge
improvement:
tiem make -j96 / 768M memcg, 4K pages, 10G ZRAM, on Intel 8255C:
Before:
Sys time: 73578.30, Real time: 864.05
After: (-50.7% sys time, -44.8% real time)
Sys time: 36227.49, Real time: 476.66
time make -j96 / 1152M memcg, 64K mTHP, 10G ZRAM, on Intel 8255C:
(avg of 4 test run)
Before:
Sys time: 74044.85, Real time: 846.51
hugepages-64kB/stats/swpout:
|
||
|
|
3494d18470 |
mm, swap: use an enum to define all cluster flags and wrap flags changes
Currently, we are only using flags to indicate which list the cluster is on. Using one bit for each list type might be a waste, as the list type grows, we will consume too many bits. Additionally, the current mixed usage of '&' and '==' is a bit confusing. Make it clean by using an enum to define all possible cluster statuses. Only an off-list cluster will have the NONE (0) flag. And use a wrapper to annotate and sanitize all flag settings and list movements. Link: https://lkml.kernel.org/r/20250113175732.48099-9-ryncsn@gmail.com Signed-off-by: Kairui Song <kasong@tencent.com> Suggested-by: Chris Li <chrisl@kernel.org> Cc: Baoquan He <bhe@redhat.com> Cc: Barry Song <v-songbaohua@oppo.com> Cc: "Huang, Ying" <ying.huang@linux.alibaba.com> Cc: Hugh Dickens <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Nhat Pham <nphamcs@gmail.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Yosry Ahmed <yosryahmed@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
|
9a0ddeb798 |
mm, swap: hold a reference during scan and cleanup flag usage
The flag SWP_SCANNING was used as an indicator of whether a device is being scanned for allocation, and prevents swapoff. Combined with SWP_WRITEOK, they work as a set of barriers for a clean swapoff: 1. Swapoff clears SWP_WRITEOK, allocation requests will see ~SWP_WRITEOK and abort as it's serialized by si->lock. 2. Swapoff unuses all allocated entries. 3. Swapoff waits for SWP_SCANNING flag to be cleared, so ongoing allocations will stop, preventing UAF. 4. Now swapoff can free everything safely. This will make the allocation path have a hard dependency on si->lock. Allocation always have to acquire si->lock first for setting SWP_SCANNING and checking SWP_WRITEOK. This commit removes this flag, and just uses the existing per-CPU refcount instead to prevent UAF in step 3, which serves well for such usage without dependency on si->lock, and scales very well too. Just hold a reference during the whole scan and allocation process. Swapoff will kill and wait for the counter. And for preventing any allocation from happening after step 1 so the unuse in step 2 can ensure all slots are free, swapoff will acquire the ci->lock of each cluster one by one to ensure all allocations see ~SWP_WRITEOK and abort. This way these dependences on si->lock are gone. And worth noting we can't kill the refcount as the first step for swapoff as the unuse process have to acquire the refcount. Link: https://lkml.kernel.org/r/20250113175732.48099-8-ryncsn@gmail.com Signed-off-by: Kairui Song <kasong@tencent.com> Cc: Baoquan He <bhe@redhat.com> Cc: Barry Song <v-songbaohua@oppo.com> Cc: Chis Li <chrisl@kernel.org> Cc: "Huang, Ying" <ying.huang@linux.alibaba.com> Cc: Hugh Dickens <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Nhat Pham <nphamcs@gmail.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Yosry Ahmed <yosryahmed@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
|
b228386cf2 |
mm, swap: clean up plist removal and adding
When the swap device is full (inuse_pages == pages), it should be removed from the allocation available plist. If any slot is freed, the swap device should be added back to the plist. Additionally, during swapon or swapoff, the swap device is forcefully added or removed. Currently, the condition (inuse_pages == pages) is checked after every counter update, then remove or add the device accordingly. This is serialized by si->lock. This commit decouples it from the protection of si->lock and reworked plist removal and adding, making it possible to get rid of the hard dependency on si->lock in allocation path in later commits. To achieve this, simply using another lock is not an optimal approach, as the overhead is observable for a hot counter, and may cause complex locking issues. Thus, this commit manages to make it a lock-free atomic operation, by embedding the plist state into the second highest bit of the atomic counter. Simply making the counter an atomic will not work, if the update and plist status check are not performed atomically, we may miss an addition or removal. With the embedded info we can update the counter and check the plist status with single atomic operations, and avoid any extra overheads: If the counter is full (inuse_pages == pages) and the off-list bit is unset, we attempt to remove it from the plist. If the counter is not full (inuse_pages != pages) and the off-list bit is set, we attempt to add it to the plist. Removing, adding and bit update is serialized with a lock, which is a cold path. Ordinary counter updates will be lock-free. Link: https://lkml.kernel.org/r/20250113175732.48099-7-ryncsn@gmail.com Signed-off-by: Kairui Song <kasong@tencent.com> Cc: Baoquan He <bhe@redhat.com> Cc: Barry Song <v-songbaohua@oppo.com> Cc: Chis Li <chrisl@kernel.org> Cc: "Huang, Ying" <ying.huang@linux.alibaba.com> Cc: Hugh Dickens <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Nhat Pham <nphamcs@gmail.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Yosry Ahmed <yosryahmed@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
|
27701521be |
mm, swap: clean up device availability check
Remove highest_bit and lowest_bit. After the HDD allocation path has been removed, the only purpose of these two fields is to determine whether the device is full or not, which can instead be determined by checking the inuse_pages. Link: https://lkml.kernel.org/r/20250113175732.48099-6-ryncsn@gmail.com Signed-off-by: Kairui Song <kasong@tencent.com> Reviewed-by: Baoquan He <bhe@redhat.com> Cc: Barry Song <v-songbaohua@oppo.com> Cc: Chis Li <chrisl@kernel.org> Cc: "Huang, Ying" <ying.huang@linux.alibaba.com> Cc: Hugh Dickens <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Nhat Pham <nphamcs@gmail.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Yosry Ahmed <yosryahmed@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
|
7277433096 |
mm, swap: remove old allocation path for HDD
We are currently using different swap allocation algorithm for HDD and non-HDD. This leads to the existence of a different set of locks, and the code path is heavily bloated, causing difficulties for further optimization and maintenance. This commit removes all HDD swap allocation and related dead code, and uses the cluster allocation algorithm instead. The performance may drop temporarily, but this should be negligible: The main advantage of the legacy HDD allocation algorithm is that it tends to use continuous slots, but swap device gets fragmented quickly anyway, and the attempt to use continuous slots will fail easily. This commit also enables mTHP swap on HDD, which is expected to be beneficial, and following commits will adapt and optimize the cluster allocator for HDD. Link: https://lkml.kernel.org/r/20250113175732.48099-4-ryncsn@gmail.com Signed-off-by: Kairui Song <kasong@tencent.com> Suggested-by: Chris Li <chrisl@kernel.org> Suggested-by: "Huang, Ying" <ying.huang@linux.alibaba.com> Reviewed-by: Baoquan He <bhe@redhat.com> Cc: Barry Song <v-songbaohua@oppo.com> Cc: Hugh Dickens <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Nhat Pham <nphamcs@gmail.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Yosry Ahmed <yosryahmed@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
|
5168a68eb7 |
mm, swap: avoid over reclaim of full clusters
When running low on usable slots, cluster allocator will try to reclaim
the full clusters aggressively to reclaim HAS_CACHE slots. This
guarantees that as long as there are any usable slots, HAS_CACHE or not,
the swap device will be usable and workload won't go OOM early.
Before the cluster allocator, swap allocator fails easily if device is
filled up with reclaimable HAS_CACHE slots. Which can be easily
reproduced with following simple program:
#include <stdio.h>
#include <string.h>
#include <linux/mman.h>
#include <sys/mman.h>
#define SIZE 8192UL * 1024UL * 1024UL
int main(int argc, char **argv) {
long tmp;
char *p = mmap(NULL, SIZE, PROT_READ | PROT_WRITE,
MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
memset(p, 0, SIZE);
madvise(p, SIZE, MADV_PAGEOUT);
for (unsigned long i = 0; i < SIZE; ++i)
tmp += p[i];
getchar(); /* Pause */
return 0;
}
Setup an 8G non ramdisk swap, the first run of the program will swapout 8G
ram successfully. But run same program again after the first run paused,
the second run can't swapout all 8G memory as now half of the swap device
is pinned by HAS_CACHE. There was a random scan in the old allocator that
may reclaim part of the HAS_CACHE by luck, but it's unreliable.
The new allocator's added reclaim of full clusters when device is low on
usable slots. But when multiple CPUs are seeing the device is low on
usable slots at the same time, they ran into a thundering herd problem.
This is an observable problem on large machine with mass parallel
workload, as full cluster reclaim is slower on large swap device and
higher number of CPUs will also make things worse.
Testing using a 128G ZRAM on a 48c96t system. When the swap device is
very close to full (eg. 124G / 128G), running build linux kernel with
make -j96 in a 1G memory cgroup will hung (not a softlockup though)
spinning in full cluster reclaim for about ~5min before go OOM.
To solve this, split the full reclaim into two parts:
- Instead of do a synchronous aggressively reclaim when device is low,
do only one aggressively reclaim when device is strictly full with a
kworker. This still ensures in worst case the device won't be unusable
because of HAS_CACHE slots.
- To avoid allocation (especially higher order) suffer from HAS_CACHE
filling up clusters and kworker not responsive enough, do one synchronous
scan every time the free list is drained, and only scan one cluster. This
is kind of similar to the random reclaim before, keeps the full clusters
rotated and has a minimal latency. This should provide a fair reclaim
strategy suitable for most workloads.
Link: https://lkml.kernel.org/r/20241022175512.10398-1-ryncsn@gmail.com
Fixes:
|
||
|
|
0ca0c24e32 |
mm: store zero pages to be swapped out in a bitmap
Patch series "mm: store zero pages to be swapped out in a bitmap", v8. As shown in the patch series that introduced the zswap same-filled optimization [1], 10-20% of the pages stored in zswap are same-filled. This is also observed across Meta's server fleet. By using VM counters in swap_writepage (not included in this patchseries) it was found that less than 1% of the same-filled pages to be swapped out are non-zero pages. For conventional swap setup (without zswap), rather than reading/writing these pages to flash resulting in increased I/O and flash wear, a bitmap can be used to mark these pages as zero at write time, and the pages can be filled at read time if the bit corresponding to the page is set. When using zswap with swap, this also means that a zswap_entry does not need to be allocated for zero filled pages resulting in memory savings which would offset the memory used for the bitmap. A similar attempt was made earlier in [2] where zswap would only track zero-filled pages instead of same-filled. This patchseries adds zero-filled pages optimization to swap (hence it can be used even if zswap is disabled) and removes the same-filled code from zswap (as only 1% of the same-filled pages are non-zero), simplifying code. [1] https://lore.kernel.org/all/20171018104832epcms5p1b2232e2236258de3d03d1344dde9fce0@epcms5p1/ [2] https://lore.kernel.org/lkml/20240325235018.2028408-1-yosryahmed@google.com/ This patch (of 2): Approximately 10-20% of pages to be swapped out are zero pages [1]. Rather than reading/writing these pages to flash resulting in increased I/O and flash wear, a bitmap can be used to mark these pages as zero at write time, and the pages can be filled at read time if the bit corresponding to the page is set. With this patch, NVMe writes in Meta server fleet decreased by almost 10% with conventional swap setup (zswap disabled). [1] https://lore.kernel.org/all/20171018104832epcms5p1b2232e2236258de3d03d1344dde9fce0@epcms5p1/ Link: https://lkml.kernel.org/r/20240823190545.979059-1-usamaarif642@gmail.com Link: https://lkml.kernel.org/r/20240823190545.979059-2-usamaarif642@gmail.com Signed-off-by: Usama Arif <usamaarif642@gmail.com> Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev> Reviewed-by: Yosry Ahmed <yosryahmed@google.com> Reviewed-by: Nhat Pham <nphamcs@gmail.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Shakeel Butt <shakeel.butt@linux.dev> Cc: Usama Arif <usamaarif642@gmail.com> Cc: Andi Kleen <ak@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
|
650180760b |
mm: swap: extend swap_shmem_alloc() to support batch SWAP_MAP_SHMEM flag setting
Patch series "support large folio swap-out and swap-in for shmem", v5. Shmem will support large folio allocation [1] [2] to get a better performance, however, the memory reclaim still splits the precious large folios when trying to swap-out shmem, which may lead to the memory fragmentation issue and can not take advantage of the large folio for shmeme. Moreover, the swap code already supports for swapping out large folio without split, and large folio swap-in[3] series is queued into mm-unstable branch. Hence this patch set also supports the large folio swap-out and swap-in for shmem. This patch (of 9): To support shmem large folio swap operations, add a new parameter to swap_shmem_alloc() that allows batch SWAP_MAP_SHMEM flag setting for shmem swap entries. While we are at it, using folio_nr_pages() to get the number of pages of the folio as a preparation. Link: https://lkml.kernel.org/r/cover.1723434324.git.baolin.wang@linux.alibaba.com Link: https://lkml.kernel.org/r/99f64115d04b285e009580eb177352c57119ffd0.1723434324.git.baolin.wang@linux.alibaba.com Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: Barry Song <baohua@kernel.org> Cc: Chris Li <chrisl@kernel.org> Cc: Daniel Gomez <da.gomez@samsung.com> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Lance Yang <ioworker0@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Pankaj Raghav <p.raghav@samsung.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
|
2cacbdfdee |
mm: swap: add a adaptive full cluster cache reclaim
Link all full cluster with one full list, and reclaim from it when the allocation have ran out of all usable clusters. There are many reason a folio can end up being in the swap cache while having no swap count reference. So the best way to search for such slots is still by iterating the swap clusters. With the list as an LRU, iterating from the oldest cluster and keep them rotating is a very doable and clean way to free up potentially not inuse clusters. When any allocation failure, try reclaim and rotate only one cluster. This is adaptive for high order allocations they can tolerate fallback. So this avoids latency, and give the full cluster list an fair chance to get reclaimed. It release the usage stress for the fallback order 0 allocation or following up high order allocation. If the swap device is getting very full, reclaim more aggresively to ensure no OOM will happen. This ensures order 0 heavy workload won't go OOM as order 0 won't fail if any cluster still have any space. [ryncsn@gmail.com: fix discard of full cluster] Link: https://lkml.kernel.org/r/CAMgjq7CWwK75_2Zi5P40K08pk9iqOcuWKL6khu=x4Yg_nXaQag@mail.gmail.com Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-9-cb9c148b9297@kernel.org Signed-off-by: Kairui Song <kasong@tencent.com> Reported-by: Barry Song <21cnbao@gmail.com> Cc: Chris Li <chrisl@kernel.org> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: David Hildenbrand <david@redhat.com> Cc: Kairui Song <ryncsn@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
|
661383c611 |
mm: swap: relaim the cached parts that got scanned
This commit implements reclaim during scan for cluster allocator. Cluster scanning were unable to reuse SWAP_HAS_CACHE slots, which could result in low allocation success rate or early OOM. So to ensure maximum allocation success rate, integrate reclaiming with scanning. If found a range of suitable swap slots but fragmented due to HAS_CACHE, just try to reclaim the slots. Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-8-cb9c148b9297@kernel.org Signed-off-by: Kairui Song <kasong@tencent.com> Reported-by: Barry Song <21cnbao@gmail.com> Cc: Chris Li <chrisl@kernel.org> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
|
477cb7ba28 |
mm: swap: add a fragment cluster list
Now swap cluster allocator arranges the clusters in LRU style, so the "cold" cluster stay at the head of nonfull lists are the ones that were used for allocation long time ago and still partially occupied. So if allocator can't find enough contiguous slots to satisfy an high order allocation, it's unlikely there will be slot being free on them to satisfy the allocation, at least in a short period. As a result, nonfull cluster scanning will waste time repeatly scanning the unusable head of the list. Also, multiple CPUs could content on the same head cluster of nonfull list. Unlike free clusters which are removed from the list when any CPU starts using it, nonfull cluster stays on the head. So introduce a new list frag list, all scanned nonfull clusters will be moved to this list. Both for avoiding repeated scanning and contention. Frag list is still used as fallback for allocations, so if one CPU failed to allocate one order of slots, it can still steal other CPU's clusters. And order 0 will favor the fragmented clusters to better protect nonfull clusters If any slots on a fragment list are being freed, move the fragment list back to nonfull list indicating it worth another scan on the cluster. Compared to scan upon freeing a slot, this keep the scanning lazy and save some CPU if there are still other clusters to use. It may seems unneccessay to keep the fragmented cluster on list at all if they can't be used for specific order allocation. But this will start to make sense once reclaim dring scanning is ready. Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-7-cb9c148b9297@kernel.org Signed-off-by: Kairui Song <kasong@tencent.com> Reported-by: Barry Song <21cnbao@gmail.com> Cc: Chris Li <chrisl@kernel.org> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
|
d07a46a4ac |
mm: swap: mTHP allocate swap entries from nonfull list
Track the nonfull cluster as well as the empty cluster on lists. Each order has one nonfull cluster list. The cluster will remember which order it was used during new cluster allocation. When the cluster has free entry, add to the nonfull[order] list. When the free cluster list is empty, also allocate from the nonempty list of that order. This improves the mTHP swap allocation success rate. There are limitations if the distribution of numbers of different orders of mTHP changes a lot. e.g. there are a lot of nonfull cluster assign to order A while later time there are a lot of order B allocation while very little allocation in order A. Currently the cluster used by order A will not reused by order B unless the cluster is 100% empty. Link: https://lkml.kernel.org/r/20240730-swap-allocator-v5-2-cb9c148b9297@kernel.org Signed-off-by: Chris Li <chrisl@kernel.org> Reported-by: Barry Song <21cnbao@gmail.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kairui Song <kasong@tencent.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
|
73ed0baae6 |
mm: swap: swap cluster switch to double link list
Patch series "mm: swap: mTHP swap allocator base on swap cluster order",
v5.
This is the short term solutions "swap cluster order" listed in my "Swap
Abstraction" discussion slice 8 in the recent LSF/MM conference.
When commit
|
||
|
|
9f101bef40 |
mm: swap: add nr argument in swapcache_prepare and swapcache_clear to support large folios
Right now, swapcache_prepare() and swapcache_clear() supports one entry only, to support large folios, we need to handle multiple swap entries. To optimize stack usage, we iterate twice in __swap_duplicate(): the first time to verify that all entries are valid, and the second time to apply the modifications to the entries. Currently, we're using nr=1 for the existing users. [v-songbaohua@oppo.com: clarify swap_count_continued and improve readability for __swap_duplicate] Link: https://lkml.kernel.org/r/20240802071817.47081-1-21cnbao@gmail.com Link: https://lkml.kernel.org/r/20240730071339.107447-2-21cnbao@gmail.com Signed-off-by: Barry Song <v-songbaohua@oppo.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Acked-by: David Hildenbrand <david@redhat.com> Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Chris Li <chrisl@kernel.org> Cc: Gao Xiang <xiang@kernel.org> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kairui Song <kasong@tencent.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Nhat Pham <nphamcs@gmail.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Shakeel Butt <shakeel.butt@linux.dev> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yosry Ahmed <yosryahmed@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
|
8ef6fd0e9e |
Merge branch 'mm-hotfixes-stable' into mm-stable to pick up "mm: fix
crashes from deferred split racing folio migration", needed by "mm: migrate: split folio_migrate_mapping()". |
||
|
|
68cd9050d8 |
mm: add swappiness= arg to memory.reclaim
Allow proactive reclaimers to submit an additional swappiness=<val> argument to memory.reclaim. This overrides the global or per-memcg swappiness setting for that reclaim attempt. For example: echo "2M swappiness=0" > /sys/fs/cgroup/memory.reclaim will perform reclaim on the rootcg with a swappiness setting of 0 (no swap) regardless of the vm.swappiness sysctl setting. Userspace proactive reclaimers use the memory.reclaim interface to trigger reclaim. The memory.reclaim interface does not allow for any way to effect the balance of file vs anon during proactive reclaim. The only approach is to adjust the vm.swappiness setting. However, there are a few reasons we look to control the balance of file vs anon during proactive reclaim, separately from reactive reclaim: * Swapout should be limited to manage SSD write endurance. In near-OOM situations we are fine with lots of swap-out to avoid OOMs. As these are typically rare events, they have relatively little impact on write endurance. However, proactive reclaim runs continuously and so its impact on SSD write endurance is more significant. Therefore it is desireable to control swap-out for proactive reclaim separately from reactive reclaim * Some userspace OOM killers like systemd-oomd[1] support OOM killing on swap exhaustion. This makes sense if the swap exhaustion is triggered due to reactive reclaim but less so if it is triggered due to proactive reclaim (e.g. one could see OOMs when free memory is ample but anon is just particularly cold). Therefore, it's desireable to have proactive reclaim reduce or stop swap-out before the threshold at which OOM killing occurs. In the case of Meta's Senpai proactive reclaimer, we adjust vm.swappiness before writes to memory.reclaim[2]. This has been in production for nearly two years and has addressed our needs to control proactive vs reactive reclaim behavior but is still not ideal for a number of reasons: * vm.swappiness is a global setting, adjusting it can race/interfere with other system administration that wishes to control vm.swappiness. In our case, we need to disable Senpai before adjusting vm.swappiness. * vm.swappiness is stateful - so a crash or restart of Senpai can leave a misconfigured setting. This requires some additional management to record the "desired" setting and ensure Senpai always adjusts to it. With this patch, we avoid these downsides of adjusting vm.swappiness globally. [1]https://www.freedesktop.org/software/systemd/man/latest/systemd-oomd.service.html [2]https://github.com/facebookincubator/oomd/blob/main/src/oomd/plugins/Senpai.cpp#L585-L598 Link: https://lkml.kernel.org/r/20240103164841.2800183-3-schatzberg.dan@gmail.com Signed-off-by: Dan Schatzberg <schatzberg.dan@gmail.com> Suggested-by: Yosry Ahmed <yosryahmed@google.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: David Rientjes <rientjes@google.com> Acked-by: Chris Li <chrisl@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Shakeel Butt <shakeel.butt@linux.dev> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Yue Zhao <findns94@gmail.com> Cc: Zefan Li <lizefan.x@bytedance.com> Cc: Nhat Pham <nphamcs@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
|
410abb20ac |
mm: add defines for min/max swappiness
Patch series "Add swappiness argument to memory.reclaim", v6. This patch proposes augmenting the memory.reclaim interface with a swappiness=<val> argument that overrides the swappiness value for that instance of proactive reclaim. Userspace proactive reclaimers use the memory.reclaim interface to trigger reclaim. The memory.reclaim interface does not allow for any way to effect the balance of file vs anon during proactive reclaim. The only approach is to adjust the vm.swappiness setting. However, there are a few reasons we look to control the balance of file vs anon during proactive reclaim, separately from reactive reclaim: * Swapout should be limited to manage SSD write endurance. In near-OOM situations we are fine with lots of swap-out to avoid OOMs. As these are typically rare events, they have relatively little impact on write endurance. However, proactive reclaim runs continuously and so its impact on SSD write endurance is more significant. Therefore it is desireable to control swap-out for proactive reclaim separately from reactive reclaim * Some userspace OOM killers like systemd-oomd[1] support OOM killing on swap exhaustion. This makes sense if the swap exhaustion is triggered due to reactive reclaim but less so if it is triggered due to proactive reclaim (e.g. one could see OOMs when free memory is ample but anon is just particularly cold). Therefore, it's desireable to have proactive reclaim reduce or stop swap-out before the threshold at which OOM killing occurs. In the case of Meta's Senpai proactive reclaimer, we adjust vm.swappiness before writes to memory.reclaim[2]. This has been in production for nearly two years and has addressed our needs to control proactive vs reactive reclaim behavior but is still not ideal for a number of reasons: * vm.swappiness is a global setting, adjusting it can race/interfere with other system administration that wishes to control vm.swappiness. In our case, we need to disable Senpai before adjusting vm.swappiness. * vm.swappiness is stateful - so a crash or restart of Senpai can leave a misconfigured setting. This requires some additional management to record the "desired" setting and ensure Senpai always adjusts to it. With this patch, we avoid these downsides of adjusting vm.swappiness globally. Previously, this exact interface addition was proposed by Yosry[3]. In response, Roman proposed instead an interface to specify precise file/anon/slab reclaim amounts[4]. More recently Huan also proposed this as well[5] and others similarly questioned if this was the proper interface. Previous proposals sought to use this to allow proactive reclaimers to effectively perform a custom reclaim algorithm by issuing proactive reclaim with different settings to control file vs anon reclaim (e.g. to only reclaim anon from some applications). Responses argued that adjusting swappiness is a poor interface for custom reclaim. In contrast, I argue in favor of a swappiness setting not as a way to implement custom reclaim algorithms but rather to bias the balance of anon vs file due to differences of proactive vs reactive reclaim. In this context, swappiness is the existing interface for controlling this balance and this patch simply allows for it to be configured differently for proactive vs reactive reclaim. Specifying explicit amounts of anon vs file pages to reclaim feels inappropriate for this prupose. Proactive reclaimers are un-aware of the relative age of file vs anon for a cgroup which makes it difficult to manage proactive reclaim of different memory pools. A proactive reclaimer would need some amount of anon reclaim attempts separate from the amount of file reclaim attempts which seems brittle given that it's difficult to observe the impact. [1]https://www.freedesktop.org/software/systemd/man/latest/systemd-oomd.service.html [2]https://github.com/facebookincubator/oomd/blob/main/src/oomd/plugins/Senpai.cpp#L585-L598 [3]https://lore.kernel.org/linux-mm/CAJD7tkbDpyoODveCsnaqBBMZEkDvshXJmNdbk51yKSNgD7aGdg@mail.gmail.com/ [4]https://lore.kernel.org/linux-mm/YoPHtHXzpK51F%2F1Z@carbon/ [5]https://lore.kernel.org/lkml/20231108065818.19932-1-link@vivo.com/ This patch (of 2): We use the constants 0 and 200 in a few places in the mm code when referring to the min and max swappiness. This patch adds MIN_SWAPPINESS and MAX_SWAPPINESS #defines to improve clarity. There are no functional changes. Link: https://lkml.kernel.org/r/20240103164841.2800183-1-schatzberg.dan@gmail.com Link: https://lkml.kernel.org/r/20240103164841.2800183-2-schatzberg.dan@gmail.com Signed-off-by: Dan Schatzberg <schatzberg.dan@gmail.com> Acked-by: David Rientjes <rientjes@google.com> Acked-by: Chris Li <chrisl@kernel.org> Reviewed-by: Nhat Pham <nphamcs@gmail.com> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Muchun Song <muchun.song@linux.dev> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shakeel Butt <shakeel.butt@linux.dev> Cc: Tejun Heo <tj@kernel.org> Cc: Yosry Ahmed <yosryahmed@google.com> Cc: Yue Zhao <findns94@gmail.com> Cc: Zefan Li <lizefan.x@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
|
5a4d8944d6 |
cachestat: do not flush stats in recency check
syzbot detects that cachestat() is flushing stats, which can sleep, in its
RCU read section (see [1]). This is done in the workingset_test_recent()
step (which checks if the folio's eviction is recent).
Move the stat flushing step to before the RCU read section of cachestat,
and skip stat flushing during the recency check.
[1]: https://lore.kernel.org/cgroups/000000000000f71227061bdf97e0@google.com/
Link: https://lkml.kernel.org/r/20240627201737.3506959-1-nphamcs@gmail.com
Fixes:
|