mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/
synced 2026-11-15 19:56:03 +00:00
2,919 commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
|
|
fe5669e363 |
irqchip/ls-extirq: Fix devm_of_iomap() error check
The devm_of_iomap() function returns an ERR_PTR() encoded error code on
failure. Replace the incorrect check against NULL with IS_ERR().
Fixes:
|
||
|
|
e08f2adcf9 |
Revert "irqchip/ls-extirq: Use for_each_of_imap_item iterator"
This reverts commit |
||
|
|
f0617176be |
irqchip/mmp: Make icu_irq_chip variable static const
File-scope 'icu_irq_chip' is not used outside of this unit and is not modified anywhere, so make it static const to silence sparse warning: irq-mmp.c:139:17: warning: symbol 'icu_irq_chip' was not declared. Should it be static? Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Signed-off-by: Thomas Gleixner <tglx@kernel.org> Link: https://patch.msgid.link/20260216110449.160277-2-krzysztof.kozlowski@oss.qualcomm.com |
||
|
|
ce9e40a9a5 |
irqchip/gic-v3-its: Limit number of per-device MSIs to the range the ITS supports
The ITS driver blindly assumes that EventIDs are in abundant supply, to the
point where it never checks how many the hardware actually supports.
It turns out that some pretty esoteric integrations make it so that only a
few bits are available, all the way down to a single bit.
Enforce the advertised limitation at the point of allocating the device
structure, and hope that the endpoint driver can deal with such limitation.
Fixes:
|
||
|
|
1072020685 |
irqchip/sifive-plic: Fix frozen interrupt due to affinity setting
PLIC ignores interrupt completion message for disabled interrupt, explained
by the specification:
The PLIC signals it has completed executing an interrupt handler by
writing the interrupt ID it received from the claim to the
claim/complete register. The PLIC does not check whether the completion
ID is the same as the last claim ID for that target. If the completion
ID does not match an interrupt source that is currently enabled for
the target, the completion is silently ignored.
This caused problems in the past, because an interrupt can be disabled
while still being handled and plic_irq_eoi() had no effect. That was fixed
by checking if the interrupt is disabled, and if so enable it, before
sending the completion message. That check is done with irqd_irq_disabled().
However, that is not sufficient because the enable bit for the handling
hart can be zero despite irqd_irq_disabled(d) being false. This can happen
when affinity setting is changed while a hart is still handling the
interrupt.
This problem is easily reproducible by dumping a large file to uart (which
generates lots of interrupts) and at the same time keep changing the uart
interrupt's affinity setting. The uart port becomes frozen almost
instantaneously.
Fix this by checking PLIC's enable bit instead of irqd_irq_disabled().
Fixes:
|
||
|
|
6086f349a3 |
cleanups and fixes
-----BEGIN PGP SIGNATURE----- iQJOBAABCAA4FiEEbt46xwy6kEcDOXoUeZbBVTGwZHAFAmmS5oAaHHRzYm9nZW5k QGFscGhhLmZyYW5rZW4uZGUACgkQeZbBVTGwZHD+LQ//fuj3BDTImgyHTBlj8yDC XF4zl5xv7ivMgTTnW9PiJdKXZOvyzGZ3Tiu4ZUdOhvpSZHtcSzJISdQC+fbTMPF6 dN7SXnF27rRzjp2nV1nhhvOWMqY53hgQiVv17qJhCwb4/nyh/69ckQu0Ut4wagn4 n/+ebRq7kIgQtzrQLnw/3oX2mcAuCQ+sPm2SRib2PbTxvQu4WqMwY8rfAtUss8dg jiXs5XgH9fHpYvPDscJ95HVfZIRqvXyLx5x8QsEvBsdS2DIv2Qy/xCzNPB/HPp9d AzRZMexSPHmC/nU7DqC4iw7FnK0//rUeUmTMjrb7+xW4P1/qTmf9LYJc5DR5N7my FJBpqLdhu8A56nGnzP5v7DdU7lffHFBzKC4AQ96re3yqZAHhyc2humDc3/0hBbPA DuD907llNsFlgQrD2DDg3F0ha9rEhkqhfP2QrZAXG90puoo/oRqfVF8QOF7Y2sal 7NJIZkh3DLsVaokiOKYLFdjcMED+3/VJB0b3JE0omrLjqZG8f1kVLVISawyv/jDz NYgg3uDQ7oGJLNnKi+gCiAL4ZFZHwj3A4rJYlMIB7Q1XR+cx4cKpmiwYtwoWIv9r AxDR6yvi8mrZ2xx4vleyeqmoB6xrHjdUJfKVXQ1kCgg7tZJWRplxQAl4HHh+cU4F EYIoq92L+PrXrq7RNILYd0o= =ZT9I -----END PGP SIGNATURE----- Merge tag 'mips_7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS updates from Thomas Bogendoerfer: "Cleanups and fixes" * tag 'mips_7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (28 commits) Revert "clk: microchip: core: allow driver to be compiled with COMPILE_TEST" Revert "clk: microchip: fix typo in reference to a config option" MIPS: Implement ARCH_HAS_CC_CAN_LINK MIPS: rb532: Fix MMIO UART resource registration MIPS: Work around LLVM bug when gp is used as global register variable MIPS: Loongson64: env: Fixup serial clock-frequency when using LEFI MIPS: Loongson2ef: Use pcibios_align_resource() to block io range MIPS: Loongson2ef: Register PCI controller in early stage clk: microchip: fix typo in reference to a config option MIPS: Loongson64: dts: fix phy-related definition of LS7A GMAC clk: microchip: core: allow driver to be compiled with COMPILE_TEST MIPS: drop unused pic32.h header watchdog: pic32-wdt: update include to use pic32.h from platform_data watchdog: pic32-dmt: update include to use pic32.h from platform_data serial: pic32_uart: update include to use pic32.h from platform_data rtc: pic32: update include to use pic32.h from platform_data pinctrl: pic32: update include to use pic32.h from platform_data mmc: sdhci-pic32: update include to use pic32.h from platform_data irqchip/irq-pic32-evic: update include to use pic32.h from platform_data clk: microchip: core: update include to use pic32.h from platform_data ... |
||
|
|
cb5573868e |
Loongarch:
- Add more CPUCFG mask bits. - Improve feature detection. - Add lazy load support for FPU and binary translation (LBT) register state. - Fix return value for memory reads from and writes to in-kernel devices. - Add support for detecting preemption from within a guest. - Add KVM steal time test case to tools/selftests. ARM: - Add support for FEAT_IDST, allowing ID registers that are not implemented to be reported as a normal trap rather than as an UNDEF exception. - Add sanitisation of the VTCR_EL2 register, fixing a number of UXN/PXN/XN bugs in the process. - Full handling of RESx bits, instead of only RES0, and resulting in SCTLR_EL2 being added to the list of sanitised registers. - More pKVM fixes for features that are not supposed to be exposed to guests. - Make sure that MTE being disabled on the pKVM host doesn't give it the ability to attack the hypervisor. - Allow pKVM's host stage-2 mappings to use the Force Write Back version of the memory attributes by using the "pass-through' encoding. - Fix trapping of ICC_DIR_EL1 on GICv5 hosts emulating GICv3 for the guest. - Preliminary work for guest GICv5 support. - A bunch of debugfs fixes, removing pointless custom iterators stored in guest data structures. - A small set of FPSIMD cleanups. - Selftest fixes addressing the incorrect alignment of page allocation. - Other assorted low-impact fixes and spelling fixes. RISC-V: - Fixes for issues discoverd by KVM API fuzzing in kvm_riscv_aia_imsic_has_attr(), kvm_riscv_aia_imsic_rw_attr(), and kvm_riscv_vcpu_aia_imsic_update() - Allow Zalasr, Zilsd and Zclsd extensions for Guest/VM - Transparent huge page support for hypervisor page tables - Adjust the number of available guest irq files based on MMIO register sizes found in the device tree or the ACPI tables - Add RISC-V specific paging modes to KVM selftests - Detect paging mode at runtime for selftests s390: - Performance improvement for vSIE (aka nested virtualization) - Completely new memory management. s390 was a special snowflake that enlisted help from the architecture's page table management to build hypervisor page tables, in particular enabling sharing the last level of page tables. This however was a lot of code (~3K lines) in order to support KVM, and also blocked several features. The biggest advantages is that the page size of userspace is completely independent of the page size used by the guest: userspace can mix normal pages, THPs and hugetlbfs as it sees fit, and in fact transparent hugepages were not possible before. It's also now possible to have nested guests and guests with huge pages running on the same host. - Maintainership change for s390 vfio-pci - Small quality of life improvement for protected guests x86: - Add support for giving the guest full ownership of PMU hardware (contexted switched around the fastpath run loop) and allowing direct access to data MSRs and PMCs (restricted by the vPMU model). KVM still intercepts access to control registers, e.g. to enforce event filtering and to prevent the guest from profiling sensitive host state. This is more accurate, since it has no risk of contention and thus dropped events, and also has significantly less overhead. For more information, see the commit message for merge commit |
||
|
|
a67594c977 |
OpenRISC updates for 6.20
The main focus for this series has been to improve OpenRISC
kernel out-of-the-box support for FPGA dev boards.
- Adds device tree configurations for De0 Nano single and
multicore configurations.
- Fixes bug in OpenRISC SMP preventing the kernel from running on FPGA
boards, due to IPIs not being unmasked on secondary CPUs in some
configurations.
- Picked up a fix from Brian Masney defining the nop() macro to fix
build failures on OpenRISC for drivers using the nop() macro.
-----BEGIN PGP SIGNATURE-----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=e/WD
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of https://github.com/openrisc/linux
Pull OpenRISC updates from Stafford Horne:
"The main focus for this series has been to improve OpenRISC kernel
out-of-the-box support for FPGA dev boards.
- Add device tree configurations for De0 Nano single and multicore
configurations
- Fix bug in OpenRISC SMP preventing the kernel from running on FPGA
boards, due to IPIs not being unmasked on secondary CPUs in some
configurations
- Pick up a fix from Brian Masney defining the nop() macro to fix
build failures on OpenRISC for drivers using it"
* tag 'for-linus' of https://github.com/openrisc/linux:
openrisc: define arch-specific version of nop()
openrisc: dts: Add de0 nano multicore config and devicetree
openrisc: dts: Split simple smp dts to dts and dtsi
openrisc: Fix IPIs on simple multicore systems
openrisc: dts: Add de0 nano config and devicetree
|
||
|
|
54f15ebfc6 |
KVM/riscv changes for 6.20
- Fixes for issues discoverd by KVM API fuzzing in kvm_riscv_aia_imsic_has_attr(), kvm_riscv_aia_imsic_rw_attr(), and kvm_riscv_vcpu_aia_imsic_update() - Allow Zalasr, Zilsd and Zclsd extensions for Guest/VM - Add riscv vm satp modes in KVM selftests - Transparent huge page support for G-stage - Adjust the number of available guest irq files based on MMIO register sizes in DeviceTree or ACPI -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEZdn75s5e6LHDQ+f/rUjsVaLHLAcFAmmF8FsACgkQrUjsVaLH LAfDYxAAh3jlLkHGlPiWtKcZ/cS+uvpA5hE52h+UmCUOU7mRuvnoA+zS3HcW8lQo qyZt/NNE4qZ7vNhcDp+BTPIGAv06lwCbsPaBkGMA94jrBHXko6GBb5qkiIqi+L0M nkUABfM5l3Rsleo8JJEGEn5Egr7waNQBr8TynF6yChAJlnbuEVskaxzwzl+s7COV wHrU4OfkXBDCLwyuP65oJbBpP+P2ylJV25gl6E0oGv2CIcMpgJIMibbTewqzVFuR Z79/GhRC64ds7+vlHhOuajehbMcBSAnkGZGC6IMOp63gyswtXZvXfI+x3uv+i1KS D5gdO7sT6WBl/Y8IDQTTv4Tuk5I9I6luClVzJtfxaIp9I5wNPx9FS4qKipUxbu+e EFWs/mC+6U7MRm49n8FwXfoDwiFYm2XA6VB2FZdAwePxJKsqON5UKI3TDNTxNuh7 rbUOFOUn3azyHgHD/WuVXRnFK4VUs0YVFgW/cx4hUWLafVkiWW/5ve5vsx1jmiBG EFN/db6unjUXa/ZIC3y/hJ1UhTBVdSKupbawWmksHav8ugE69o7GF8r5J7/RQtTj 6MHTNFwvatjaWVzCCjYQ+hV/qGD2SMB0D7rReV28D44KFQCrCgTmkpJoZKu+Uq2B sjI1XW8kH/n3OX/Sllj3ZO+VOfeXWlBC6yW5ARhnsEvoc4bHWpk= =PSMs -----END PGP SIGNATURE----- Merge tag 'kvm-riscv-6.20-1' of https://github.com/kvm-riscv/linux into HEAD KVM/riscv changes for 6.20 - Fixes for issues discoverd by KVM API fuzzing in kvm_riscv_aia_imsic_has_attr(), kvm_riscv_aia_imsic_rw_attr(), and kvm_riscv_vcpu_aia_imsic_update() - Allow Zalasr, Zilsd and Zclsd extensions for Guest/VM - Add riscv vm satp modes in KVM selftests - Transparent huge page support for G-stage - Adjust the number of available guest irq files based on MMIO register sizes in DeviceTree or ACPI |
||
|
|
bdbddf72a2 |
soc: driver updates for 7.0
There are are a number of to firmware drivers, in particular the TEE
subsystem:
- a bus callback for TEE firmware that device drivers can register to
- sysfs support for tee firmware information
- minor updates to platform specific TEE drivers for AMD, NXP, Qualcomm
and the generic optee driver
- ARM SCMI firmware refactoring to improve the protocol discover
among other fixes and cleanups
- ARM FF-A firmware interoperability improvements
The reset controller and memory controller subsystems gain support for
additional hardware platforms from Mediatek, Renesas, NXP, Canaan and
SpacemiT.
Most of the other changes are for random drivers/soc code. Among
a number of cleanups and newly added hardware support, including:
- Mediatek MT8196 DVFS power management and mailbox support
- Qualcomm SCM firmware and MDT loader refactoring, as part of
the new Glymur platform support.
- NXP i.MX9 System Manager firmware support for accessing the
syslog
- Minor updates for TI, Renesas, Samsung, Apple, Marvell and AMD
SoCs.
-----BEGIN PGP SIGNATURE-----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=rUYH
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"There are are a number of to firmware drivers, in particular the TEE
subsystem:
- a bus callback for TEE firmware that device drivers can register to
- sysfs support for tee firmware information
- minor updates to platform specific TEE drivers for AMD, NXP,
Qualcomm and the generic optee driver
- ARM SCMI firmware refactoring to improve the protocol discover
among other fixes and cleanups
- ARM FF-A firmware interoperability improvements
The reset controller and memory controller subsystems gain support for
additional hardware platforms from Mediatek, Renesas, NXP, Canaan and
SpacemiT.
Most of the other changes are for random drivers/soc code. Among a
number of cleanups and newly added hardware support, including:
- Mediatek MT8196 DVFS power management and mailbox support
- Qualcomm SCM firmware and MDT loader refactoring, as part of the
new Glymur platform support.
- NXP i.MX9 System Manager firmware support for accessing the syslog
- Minor updates for TI, Renesas, Samsung, Apple, Marvell and AMD
SoCs"
* tag 'soc-drivers-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (171 commits)
bus: fsl-mc: fix an error handling in fsl_mc_device_add()
reset: spacemit: Add SpacemiT K3 reset driver
reset: spacemit: Extract common K1 reset code
reset: Create subdirectory for SpacemiT drivers
dt-bindings: soc: spacemit: Add K3 reset support and IDs
reset: canaan: k230: drop OF dependency and enable by default
reset: rzg2l-usbphy-ctrl: Add suspend/resume support
reset: rzg2l-usbphy-ctrl: Propagate the return value of regmap_field_update_bits()
reset: gpio: check the return value of gpiod_set_value_cansleep()
reset: imx8mp-audiomix: Support i.MX8ULP SIM LPAV
reset: imx8mp-audiomix: Extend the driver usage
reset: imx8mp-audiomix: Switch to using regmap API
reset: imx8mp-audiomix: Drop unneeded macros
soc: fsl: qe: qe_ports_ic: Consolidate chained IRQ handler install/remove
soc: mediatek: mtk-cmdq: Add mminfra_offset adjustment for DRAM addresses
soc: mediatek: mtk-cmdq: Extend cmdq_pkt_write API for SoCs without subsys ID
soc: mediatek: mtk-cmdq: Add pa_base parsing for hardware without subsys ID support
soc: mediatek: mtk-cmdq: Add cmdq_get_mbox_priv() in cmdq_pkt_create()
mailbox: mtk-cmdq: Add driver data to support for MT8196
mailbox: mtk-cmdq: Add mminfra_offset configuration for DRAM transaction
...
|
||
|
|
dc855b7771 |
Updates for interrupt chip drivers:
- Add support for the Renesas RZ/V2N SoC
- Add a new driver for the Renesas RZ/[TN]2H SoCs
- Preserve the register state of the RISCV APLIC interrupt controller accross
suspend/resume
- Reinitialize the RISCV IMSIC registers after suspend/resume
- Make the various Loongson interrupt chip drivers 32/64-bit aware
- Handle the number of hardware interrupts in the SIFIVE PLIC driver
correctly.
The hardware interrupt 0 is reserved which resulted in inconsistent
accounting. That went unnoticed as the off by one is only noticable when
the number of device interrupts is a multiple of 32.
- The usual device tree updates, cleanups and improvements all over the place.
-----BEGIN PGP SIGNATURE-----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=ZMMl
-----END PGP SIGNATURE-----
Merge tag 'irq-drivers-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq chip driver updates from Thomas Gleixner:
- Add support for the Renesas RZ/V2N SoC
- Add a new driver for the Renesas RZ/[TN]2H SoCs
- Preserve the register state of the RISCV APLIC interrupt controller
accross suspend/resume
- Reinitialize the RISCV IMSIC registers after suspend/resume
- Make the various Loongson interrupt chip drivers 32/64-bit aware
- Handle the number of hardware interrupts in the SIFIVE PLIC driver
correctly
The hardware interrupt 0 is reserved which resulted in inconsistent
accounting. That went unnoticed as the off by one is only noticable
when the number of device interrupts is a multiple of 32
- The usual device tree updates, cleanups and improvements all over the
place
* tag 'irq-drivers-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
irqchip/gic-v5: Fix spelling mistake "ouside" -> "outside"
dt-bindings: interrupt-controller: sifive,plic: Clarify the riscv,ndev meaning in PLIC
irqchip/sifive-plic: Handle number of hardware interrupts correctly
irqchip/aspeed-scu-ic: Remove unused variable mask
irqchip/ti-sci-intr: Allow parsing interrupt-types per-line
dt-bindings: interrupt-controller: ti,sci-intr: Per-line interrupt-types
irqchip/renesas-rzv2h: Add suspend/resume support
irqchip/aslint-sswi: Fix error check of of_io_request_and_map() result
irqchip: Allow LoongArch irqchip drivers on both 32BIT/64BIT
irqchip/loongson-pch-pic: Adjust irqchip driver for 32BIT/64BIT
irqchip/loongson-pch-msi: Adjust irqchip driver for 32BIT/64BIT
irqchip/loongson-htvec: Adjust irqchip driver for 32BIT/64BIT
irqchip/loongson-eiointc: Adjust irqchip driver for 32BIT/64BIT
irqchip/loongson-liointc: Adjust irqchip driver for 32BIT/64BIT
irqchip/loongarch-avec: Adjust irqchip driver for 32BIT/64BIT
irqchip/riscv-aplic: Preserve APLIC states across suspend/resume
irqchip/riscv-imsic: Add a CPU pm notifier to restore the IMSIC on exit
arm64: dts: renesas: r9a09g087: Add ICU support
arm64: dts: renesas: r9a09g077: Add ICU support
irqchip: Add RZ/{T2H,N2H} Interrupt Controller (ICU) driver
...
|
||
|
|
d84e173311 |
ACPI support updates for 6.20-rc1/7.0-rc1
- Update the ACPICA code in the kernel to upstream version 20251212
which includes the following changes:
* Add support for new ACPI table DTPR (Michal Camacho Romero)
* Release objects with acpi_ut_delete_object_desc() (Zilin Guan)
* Add UUIDs for Microsoft fan extensions and UUIDs associated with
TPM 2.0 devices (Armin Wolf)
* Fix NULL pointer dereference in acpi_ev_address_space_dispatch()
(Alexey Simakov)
* Add KEYP ACPI table definition (Dave Jiang)
* Add support for the Microsoft display mux _OSI string (Armin Wolf)
* Add definitions for the IOVT ACPI table (Xianglai Li)
* Abort AML bytecode execution on AML_FATAL_OP (Armin Wolf)
* Include all fields in subtable type1 for PPTT (Ben Horgan)
* Add GICv5 MADT structures and Arm IORT IWB node definitions (Jose
Marinho)
* Update Parameter Block structure for RAS2 and add a new flag in
Memory Affinity Structure for SRAT (Pawel Chmielewski)
* Add _VDM (Voltage Domain) object (Pawel Chmielewski)
- Add support for GICv5 ACPI probing on ARM which is based on the
GICv5 MADT structures and ARM IORT IWB node definitions recently
added to ACPICA (Lorenzo Pieralisi)
- Rework ACPI PM notification setup for PCI root buses and modify the
ACPI PM setup for devices to register wakeup source objects under
physical (that is, PCI, platform, etc.) devices instead of doing that
under their ACPI companions (Rafael Wysocki)
- Adjust debug messages regarding postponed ACPI PM printed during
system resume to be more accurate (Rafael Wysocki)
- Remove dead code from lps0_device_attach() (Gergo Koteles)
- Start to invoke Microsoft Function 9 (Turn On Display) of the Low-
Power S0 Idle (LPS0) _DSM in the suspend-to-idle resume flow on
systems with ACPI LPS0 support to address a functional issue on
Lenovo Yoga Slim 7i Aura (15ILL9), where system fans and keyboard
backlights fail to resume after suspend (Jakob Riemenschneider)
- Add sysfs attribute cid for exposing _CID lists under ACPI device
objects (Rafael Wysocki)
- Replace sprintf() with sysfs_emit() in all of the core ACPI sysfs
interface code (Sumeet Pawnikar)
- Use acpi_get_local_u64_address() in the code implementing ACPI
support for PCI to evaluate _ADR instead of evaluating that object
directly (Andy Shevchenko)
- Add JWIPC JVC9100 to irq1_level_low_skip_override[] to unbreak
serial IRQs on that system (Ai Chao)
- Fix handling of _OSC errors in acpi_run_osc() to avoid failures on
systems where _OSC error bits are set even though the _OSC return
buffer contains acknowledged feature bits (Rafael Wysocki)
- Clean up and rearrange \_SB._OSC handling for general platform
features and USB4 features to avoid code duplication and unnecessary
memory management overhead (Rafael Wysocki)
- Make the ACPI core device enumeration code handle PNP0C01 and PNP0C02
("system resource") device objects directly instead of letting the
legacy PNP system driver handle them to avoid device enumeration
issues on systems where PNP0C02 is present in the _CID list under
ACPI device objects with a _HID matching a proper device driver in
Linux (Rafael Wysocki)
- Drop workarounds for the known device enumeration issues related to
_CID lists containing PNP0C02 (Rafael Wysocki)
- Drop outdated comment regarding removed function in the ACPI-based
device enumeration code (Julia Lawall)
- Make PRP0001 device matching work as expected for ACPI device objects
using it as a _HID for board development and similar purposes (Kartik
Rajput)
- Use async schedule function in acpi_scan_clear_dep_fn() to avoid
races with user space initialization on some systems (Yicong Yang)
- Add a piece of documentation explaining why binding drivers directly
to ACPI device objects is not a good idea in general and why it is
desirable to convert drivers doing so into proper platform drivers
that use struct platform_driver for device binding (Rafael Wysocki)
- Convert multiple "core ACPI" drivers, including the NFIT ACPI device
driver, the generic ACPI button drivers, the generic ACPI thermal
zone driver, the ACPI hardware event device (HED) driver, the ACPI EC
driver, the ACPI SMBUS HC driver, the ACPI Smart Battery Subsystem
(SBS) driver, and the ACPI backlight (video) driver to proper platform
drivers that use struct platform_driver for device binding (Rafael
Wysocki)
- Use acpi_get_local_u64_address() in the ACPI backlight (video) driver
to evaluate _ADR instead of evaluating that object directly (Andy
Shevchenko)
- Convert the generic ACPI battery driver to a proper platform driver
using struct platform_driver for device binding (Rafael Wysocki)
- Fix incorrect charging status when current is zero in the generic
ACPI battery driver (Ata İlhan Köktürk)
- Use LIST_HEAD() for initializing a stack-allocated list in the
generic ACPI watchdog device driver (Can Peng)
- Rework the ACPI idle driver initialization to register it directly
from the common initialization code instead of doing that from a
CPU hotplug "online" callback and clean it up (Huisong Li, Rafael
Wysocki)
- Fix a possible NULL pointer dereference in
acpi_processor_errata_piix4() (Tuo Li)
- Make read-only array non_mmio_desc[] static const (Colin Ian King)
- Prevent the APEI GHES support code on ARM from accessing memory out
of bounds or going past the ARM processor CPER record buffer (Mauro
Carvalho Chehab)
- Prevent cper_print_fw_err() from dumping the entire memory on systems
with defective firmware (Mauro Carvalho Chehab)
- Improve ghes_notify_nmi() status check to avoid unnecessary overhead
in the NMI handler by carrying out all of the requisite preparations
and the NMI registration time (Tony Luck)
- Refactor the GHES driver by extracting common functionality into
reusable helper functions to reduce code duplication and improve
the ghes_notify_sea() status check in analogy with the previous
ghes_notify_nmi() status check improvement (Shuai Xue)
- Make ELOG and GHES log and trace consistently and support the CPER
CXL protocol analogously (Fabio De Francesco)
- Disable KASAN instrumentation in the APEI GHES driver when compile
testing with clang < 18 (Nathan Chancellor)
- Let ghes_edac be the preferred driver to load on __ZX__ and _BYO_
systems by extending the platform detection list in the APEI GHES
driver (Tony W Wang-oc)
- Clean up cppc_perf_caps and cppc_perf_ctrls structs and rename EPP
constants for clarity in the ACPI CPPC library (Sumit Gupta)
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmmErOoSHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO1wCoH/iWkTc5/kTTmzi5Urh9lsUsOL8Oc9hrx
KlH4XdLf9TUUSGPJtPRrrtXiOotNUSaZpg2ULktJAZHxDWXnA83DO0FjwT3+2WbH
/5YGVEK24Sae+DI38ukEvOI6bXrxxqNPLnFRtvV7tclUJD2OEAdKcUd8Y98s9qNf
64bf2gKoQtbZj0eM33KHiotULYZUNoZ2SWKFAWXzKQr7EOkcQGKcuupeStgQ04Id
uumWr+lIgW5vYPOcPFCufE3+LM0MzDvruxBlMJQEJJFVkY4IEFwwJNGW/lo8hgE3
74pFKqOPhYsIFPM8rtKXS+JmjP22iCI49QjnHIsQdDG03GEKvKFFeCw=
=CG0j
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"This one is significantly larger than previous ACPI support pull
requests because several significant updates have coincided in it.
First, there is a routine ACPICA code update, to upstream version
20251212, but this time it covers new ACPI 6.6 material that has not
been covered yet. Among other things, it includes definitions of a few
new ACPI tables and updates of some others, like the GICv5 MADT
structures and ARM IORT IWB node definitions that are used for adding
GICv5 ACPI probing on ARM (that technically is IRQ subsystem material,
but it depends on the ACPICA changes, so it is included here). The
latter alone adds a few hundred lines of new code.
Second, there is an update of ACPI _OSC handling including a fix that
prevents failures from occurring in some corner cases due to careless
handling of _OSC error bits.
On top of that, the "system resource" ACPI device objects with the
PNP0C01 and PNP0C02 are now going to be handled by the ACPI core
device enumeration code instead of handing them over to the legacy PNP
system driver which causes device enumeration issues to occur. Some of
those issues have been worked around in device drivers and elsewhere
and those workarounds should not be necessary any more, so they are
going away.
Moreover, the time has come to convert all "core ACPI" device drivers
that were still using struct acpi_driver objects for device binding
into proper platform drivers that use struct platform_driver for this
purpose. These updates are accompanied by some requisite core ACPI
device enumeration code changes.
Next, there are ACPI APEI updates, including changes to avoid excess
overhead in the NMI handler and in SEA on the ARM side, changes to
unify ACPI-based HW error tracing and logging, and changes to prevent
APEI code from reaching out of its allocated memory.
There are also some ACPI power management updates, mostly related to
the ACPI cpuidle support in the processor driver, suspend-to-idle
handling on systems with ACPI support and to ACPI PM of devices.
In addition to the above, bugs are fixed and the code is cleaned up in
assorted places all over.
Specifics:
- Update the ACPICA code in the kernel to upstream version 20251212
which includes the following changes:
* Add support for new ACPI table DTPR (Michal Camacho Romero)
* Release objects with acpi_ut_delete_object_desc() (Zilin Guan)
* Add UUIDs for Microsoft fan extensions and UUIDs associated with
TPM 2.0 devices (Armin Wolf)
* Fix NULL pointer dereference in acpi_ev_address_space_dispatch()
(Alexey Simakov)
* Add KEYP ACPI table definition (Dave Jiang)
* Add support for the Microsoft display mux _OSI string (Armin
Wolf)
* Add definitions for the IOVT ACPI table (Xianglai Li)
* Abort AML bytecode execution on AML_FATAL_OP (Armin Wolf)
* Include all fields in subtable type1 for PPTT (Ben Horgan)
* Add GICv5 MADT structures and Arm IORT IWB node definitions
(Jose Marinho)
* Update Parameter Block structure for RAS2 and add a new flag in
Memory Affinity Structure for SRAT (Pawel Chmielewski)
* Add _VDM (Voltage Domain) object (Pawel Chmielewski)
- Add support for GICv5 ACPI probing on ARM which is based on the
GICv5 MADT structures and ARM IORT IWB node definitions recently
added to ACPICA (Lorenzo Pieralisi)
- Rework ACPI PM notification setup for PCI root buses and modify the
ACPI PM setup for devices to register wakeup source objects under
physical (that is, PCI, platform, etc.) devices instead of doing
that under their ACPI companions (Rafael Wysocki)
- Adjust debug messages regarding postponed ACPI PM printed during
system resume to be more accurate (Rafael Wysocki)
- Remove dead code from lps0_device_attach() (Gergo Koteles)
- Start to invoke Microsoft Function 9 (Turn On Display) of the Low-
Power S0 Idle (LPS0) _DSM in the suspend-to-idle resume flow on
systems with ACPI LPS0 support to address a functional issue on
Lenovo Yoga Slim 7i Aura (15ILL9), where system fans and keyboard
backlights fail to resume after suspend (Jakob Riemenschneider)
- Add sysfs attribute cid for exposing _CID lists under ACPI device
objects (Rafael Wysocki)
- Replace sprintf() with sysfs_emit() in all of the core ACPI sysfs
interface code (Sumeet Pawnikar)
- Use acpi_get_local_u64_address() in the code implementing ACPI
support for PCI to evaluate _ADR instead of evaluating that object
directly (Andy Shevchenko)
- Add JWIPC JVC9100 to irq1_level_low_skip_override[] to unbreak
serial IRQs on that system (Ai Chao)
- Fix handling of _OSC errors in acpi_run_osc() to avoid failures on
systems where _OSC error bits are set even though the _OSC return
buffer contains acknowledged feature bits (Rafael Wysocki)
- Clean up and rearrange \_SB._OSC handling for general platform
features and USB4 features to avoid code duplication and
unnecessary memory management overhead (Rafael Wysocki)
- Make the ACPI core device enumeration code handle PNP0C01 and
PNP0C02 ("system resource") device objects directly instead of
letting the legacy PNP system driver handle them to avoid device
enumeration issues on systems where PNP0C02 is present in the _CID
list under ACPI device objects with a _HID matching a proper device
driver in Linux (Rafael Wysocki)
- Drop workarounds for the known device enumeration issues related to
_CID lists containing PNP0C02 (Rafael Wysocki)
- Drop outdated comment regarding removed function in the ACPI-based
device enumeration code (Julia Lawall)
- Make PRP0001 device matching work as expected for ACPI device
objects using it as a _HID for board development and similar
purposes (Kartik Rajput)
- Use async schedule function in acpi_scan_clear_dep_fn() to avoid
races with user space initialization on some systems (Yicong Yang)
- Add a piece of documentation explaining why binding drivers
directly to ACPI device objects is not a good idea in general and
why it is desirable to convert drivers doing so into proper
platform drivers that use struct platform_driver for device binding
(Rafael Wysocki)
- Convert multiple "core ACPI" drivers, including the NFIT ACPI
device driver, the generic ACPI button drivers, the generic ACPI
thermal zone driver, the ACPI hardware event device (HED) driver,
the ACPI EC driver, the ACPI SMBUS HC driver, the ACPI Smart
Battery Subsystem (SBS) driver, and the ACPI backlight (video)
driver to proper platform drivers that use struct platform_driver
for device binding (Rafael Wysocki)
- Use acpi_get_local_u64_address() in the ACPI backlight (video)
driver to evaluate _ADR instead of evaluating that object directly
(Andy Shevchenko)
- Convert the generic ACPI battery driver to a proper platform driver
using struct platform_driver for device binding (Rafael Wysocki)
- Fix incorrect charging status when current is zero in the generic
ACPI battery driver (Ata İlhan Köktürk)
- Use LIST_HEAD() for initializing a stack-allocated list in the
generic ACPI watchdog device driver (Can Peng)
- Rework the ACPI idle driver initialization to register it directly
from the common initialization code instead of doing that from a
CPU hotplug "online" callback and clean it up (Huisong Li, Rafael
Wysocki)
- Fix a possible NULL pointer dereference in
acpi_processor_errata_piix4() (Tuo Li)
- Make read-only array non_mmio_desc[] static const (Colin Ian King)
- Prevent the APEI GHES support code on ARM from accessing memory out
of bounds or going past the ARM processor CPER record buffer (Mauro
Carvalho Chehab)
- Prevent cper_print_fw_err() from dumping the entire memory on
systems with defective firmware (Mauro Carvalho Chehab)
- Improve ghes_notify_nmi() status check to avoid unnecessary
overhead in the NMI handler by carrying out all of the requisite
preparations and the NMI registration time (Tony Luck)
- Refactor the GHES driver by extracting common functionality into
reusable helper functions to reduce code duplication and improve
the ghes_notify_sea() status check in analogy with the previous
ghes_notify_nmi() status check improvement (Shuai Xue)
- Make ELOG and GHES log and trace consistently and support the CPER
CXL protocol analogously (Fabio De Francesco)
- Disable KASAN instrumentation in the APEI GHES driver when compile
testing with clang < 18 (Nathan Chancellor)
- Let ghes_edac be the preferred driver to load on __ZX__ and _BYO_
systems by extending the platform detection list in the APEI GHES
driver (Tony W Wang-oc)
- Clean up cppc_perf_caps and cppc_perf_ctrls structs and rename EPP
constants for clarity in the ACPI CPPC library (Sumit Gupta)"
* tag 'acpi-6.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (117 commits)
ACPI: battery: fix incorrect charging status when current is zero
ACPI: scan: Use async schedule function in acpi_scan_clear_dep_fn()
ACPI: x86: s2idle: Invoke Microsoft _DSM Function 9 (Turn On Display)
ACPI: APEI: GHES: Add ghes_edac support for __ZX__ and _BYO_ systems
ACPI: APEI: GHES: Disable KASAN instrumentation when compile testing with clang < 18
ACPI: sysfs: Replace sprintf() with sysfs_emit()
ACPI: CPPC: Rename EPP constants for clarity
ACPI: CPPC: Clean up cppc_perf_caps and cppc_perf_ctrls structs
ACPI: processor: idle: Rework the handling of acpi_processor_ffh_lpi_probe()
ACPI: processor: idle: Convert acpi_processor_setup_cpuidle_dev() to void
ACPI: processor: idle: Convert acpi_processor_setup_cpuidle_states() to void
irqchip/gic-v5: Add ACPI IWB probing
irqchip/gic-v5: Add ACPI ITS probing
irqchip/gic-v5: Add ACPI IRS probing
irqchip/gic-v5: Split IRS probing into OF and generic portions
PCI/MSI: Make the pci_msi_map_rid_ctlr_node() interface firmware agnostic
irqdomain: Add parent field to struct irqchip_fwid
ACPI: PCI: simplify code with acpi_get_local_u64_address()
ACPI: video: simplify code with acpi_get_local_u64_address()
ACPI: PM: Adjust messages regarding postponed ACPI PM
...
|
||
|
|
5490063269 |
KVM/arm64 updates for 7.0
- Add support for FEAT_IDST, allowing ID registers that are not implemented to be reported as a normal trap rather than as an UNDEF exception. - Add sanitisation of the VTCR_EL2 register, fixing a number of UXN/PXN/XN bugs in the process. - Full handling of RESx bits, instead of only RES0, and resulting in SCTLR_EL2 being added to the list of sanitised registers. - More pKVM fixes for features that are not supposed to be exposed to guests. - Make sure that MTE being disabled on the pKVM host doesn't give it the ability to attack the hypervisor. - Allow pKVM's host stage-2 mappings to use the Force Write Back version of the memory attributes by using the "pass-through' encoding. - Fix trapping of ICC_DIR_EL1 on GICv5 hosts emulating GICv3 for the guest. - Preliminary work for guest GICv5 support. - A bunch of debugfs fixes, removing pointless custom iterators stored in guest data structures. - A small set of FPSIMD cleanups. - Selftest fixes addressing the incorrect alignment of page allocation. - Other assorted low-impact fixes and spelling fixes. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEn9UcU+C1Yxj9lZw9I9DQutE9ekMFAmmGBEkACgkQI9DQutE9 ekPxQQ//VOzle+RVmgzVSJzpNcoW576QGI7+pZLEMIywXTx6rH+uz2FCaZvvgV7M LrJ+1Qps9ea5Yti9OplNJmQwy1yAHIurZnpnAoMR+EJ5PUeq8p1EAypySpHtmT/d KngZsbCvSMydNdfJFwGaz3NFSYj05FlTmWNN+Ndq0JFqyMJQMgY2qKDVmg3pWKcv TLKTNRo9fJFUVhhBIyIoMl2hE36M6Ac3Qd4dUb5J+Fn834QDXgOzVzUjBtkmbSHD kJ4gbSs2Ic6QsYWtt70RlyRdreBYegA4C3z1cZV6DDQYxp5Jz2oqXYYC31Ro520A swuI5y9HMct4mOxqPUqf1lhbvsmkjuZ5Iog6P7W+mOtYHXZIzY8F61sv9YAis9/5 XNOHkg9Cn/n8C2RRQ8vnq0FEI1g7se1UGbe/1NkD4xeR/bzhE/AZSoOrRE7G/XJx qbF9FkPzd4OXYB2Pdm37G1BWsfN4M1bY1rOmmCyMKym793+b/jM7xdoZY1QfbabP uKiavuK8RYgqxrEilhP0asvafKjpZaJbn2R3jwHZgQDWe7WH5FhXwX2UcUpQsTan XZd+/cWaYXjLsKJbiAzy3UArgnzSrHPSpwIOkYq8Lf8EvPgS2g3LLJYbw250Cf1G 74stwoK4PgZ3e6k0nkMk43x1swKb13Gp0vCZjVdnIec9EQgOHfI= =X8iC -----END PGP SIGNATURE----- Merge tag 'kvmarm-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 updates for 7.0 - Add support for FEAT_IDST, allowing ID registers that are not implemented to be reported as a normal trap rather than as an UNDEF exception. - Add sanitisation of the VTCR_EL2 register, fixing a number of UXN/PXN/XN bugs in the process. - Full handling of RESx bits, instead of only RES0, and resulting in SCTLR_EL2 being added to the list of sanitised registers. - More pKVM fixes for features that are not supposed to be exposed to guests. - Make sure that MTE being disabled on the pKVM host doesn't give it the ability to attack the hypervisor. - Allow pKVM's host stage-2 mappings to use the Force Write Back version of the memory attributes by using the "pass-through' encoding. - Fix trapping of ICC_DIR_EL1 on GICv5 hosts emulating GICv3 for the guest. - Preliminary work for guest GICv5 support. - A bunch of debugfs fixes, removing pointless custom iterators stored in guest data structures. - A small set of FPSIMD cleanups. - Selftest fixes addressing the incorrect alignment of page allocation. - Other assorted low-impact fixes and spelling fixes. |
||
|
|
376e2f8cca |
irqchip/riscv-imsic: Adjust the number of available guest irq files
Currently, KVM assumes the minimum of implemented HGEIE bits and "BIT(gc->guest_index_bits) - 1" as the number of guest files available across all CPUs. This will not work when CPUs have different number of guest files because KVM may incorrectly allocate a guest file on a CPU with fewer guest files. To address above, during initialization, calculate the number of available guest interrupt files according to MMIO resources and constrain the number of guest interrupt files that can be allocated by KVM. Signed-off-by: Xu Lu <luxu.kernel@bytedance.com> Reviewed-by: Nutty Liu <nutty.liu@hotmail.com> Reviewed-by: Anup Patel <anup@brainfault.org> Acked-by: Thomas Gleixner <tglx@kernel.org> Link: https://lore.kernel.org/r/20260104133457.57742-1-luxu.kernel@bytedance.com Signed-off-by: Anup Patel <anup@brainfault.org> |
||
|
|
6054b10c32 |
irqchip/gic-v5: Fix spelling mistake "ouside" -> "outside"
There is a spelling mistake in a pr_err message. Fix it. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Thomas Gleixner <tglx@kernel.org> Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com> Acked-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Link: https://patch.msgid.link/20260203210735.5036-1-colin.i.king@gmail.com |
||
|
|
42e025b719 |
irqchip/sifive-plic: Handle number of hardware interrupts correctly
The driver is handling the number of hardware interrupts inconsistently.
The reason is that the firmware enumerates the maximum number of device
interrupts, but the actual number of hardware interrupts is one more
because hardware interrupt 0 is reserved.
There are two loop variants where this matters:
1) Iterating over the device interrupts
for (irq = 1; irq < total_irqs; irq++)
2) Iterating over the number of interrupt register groups
for (grp = 0; grp < irq_groups; grp++)
The current code stores the number of device interrupts and that requires
to write the loops as:
1) for (irq = 1; irq <= device_irqs; irq++)
2) for (grp = 0; grp < DIV_ROUND_UP(device_irqs + 1); grp++)
But the code gets it wrong all over the place. Just fixing up the
conditions and off by ones is not a sustainable solution as the next changes
will reintroduce the same bugs over and over.
Sanitize it by storing the total number of hardware interrupts during probe
and precalculating the number of groups. To future proof it mark
priv::total_irqs __private, provide a correct iterator macro and adjust the
code to this.
Marking it private allows sparse (C=1 build) to catch direct access to this
member:
drivers/irqchip/irq-sifive-plic.c:270:9: warning: dereference of noderef expression
That should prevent at least the most obvious future damage in that area.
Fixes:
|
||
|
|
e1f94662d7 |
irqchip/aspeed-scu-ic: Remove unused variable mask
The kernel test robot reports:
drivers/irqchip/irq-aspeed-scu-ic.c:107:27: warning: variable 'mask' set but not used
107 | unsigned int sts, mask;
Remove the leftover.
Fixes:
|
||
|
|
06e6f8112b |
irqchip/irq-pic32-evic: update include to use pic32.h from platform_data
Use the linux/platform_data/pic32.h include instead of asm/mach-pic32/pic32.h so that the asm variant can be dropped. This is in preparation for allowing some drivers to be compiled on other architectures with COMPILE_TEST enabled. Signed-off-by: Brian Masney <bmasney@redhat.com> Acked-by: Thomas Gleixner <tglx@kernel.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> |
||
|
|
3227c3a89d |
irqchip/gic-v5: Check if impl is virt capable
Now that there is support for creating a GICv5-based guest with KVM, check that the hardware itself supports virtualisation, skipping the setting of struct gic_kvm_info if not. Note: If native GICv5 virt is not supported, then nor is FEAT_GCIE_LEGACY, so we are able to skip altogether. Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com> Reviewed-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com> Link: https://patch.msgid.link/20260128175919.3828384-33-sascha.bischoff@arm.com [maz: cosmetic changes] Signed-off-by: Marc Zyngier <maz@kernel.org> |
||
|
|
05cd654829 |
irqchip/ls-extirq: Convert to a platform driver to make it work again
Starting with the blamed commit, the ls-extirq driver stopped working. This
is because ls-extirq, being one of the interrupt-map property abusers, does
not pass the DT checks added by the referenced commit, making it unable to
determine its interrupt parent:
irq-ls-extirq: Cannot find parent domain
OF: of_irq_init: Failed to init /soc/syscon@1f70000/interrupt-controller@14
((____ptrval____)), parent 0000000000000000
Instead of reverting the referenced commit, convert the ls-extirq to a
platform driver to avoid the irqchip_init() -> of_irq_init() code path
completely.
As part of the conversion, use the managed resources APIs and
dev_err_probe() so that there is no need for a .remove() callback or for
complicated error handling.
Fixes:
|
||
|
|
05bff3419a |
irqchip/gic-v5: Add ACPI IWB probing
To probe an IWB in an ACPI based system it is required: - to implement the IORT functions handling the IWB IORT node and create functions to retrieve IWB firmware information - to augment the driver to match the DSDT ACPI "ARMH0003" device and retrieve the IWB wire and trigger mask from the GSI interrupt descriptor in the IWB msi_domain_ops.msi_translate() function Make the required driver changes to enable IWB probing in ACPI systems. The GICv5 GSI format requires special handling for IWB routed IRQs. Add IWB GSI detection to the top level driver gic_v5_get_gsi_domain_id() function so that the correct IRQ domain for a GSI can be detected by parsing the GSI and check whether it is an IWB-backed IRQ or not. Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com> Acked-by: Thomas Gleixner <tglx@kernel.org> Link: https://patch.msgid.link/20260115-gicv5-host-acpi-v3-6-c13a9a150388@kernel.org Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
|
a97efa5ba5 |
irqchip/gic-v5: Add ACPI ITS probing
On ACPI ARM64 systems the GICv5 ITS configuration and translate frames are described in the MADT table. Refactor the current GICv5 ITS driver code to share common functions between ACPI and OF and implement ACPI probing in the GICv5 ITS driver. Add iort_msi_xlate() to map a device ID and retrieve an MSI controller fwnode node for ACPI systems and update pci_msi_map_rid_ctlr_node() to use it in its ACPI code path. Add the required functions to IORT code for deviceID retrieval and IRQ domain registration and look-up so that the GICv5 ITS driver in an ACPI based system can be successfully probed. Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com> Acked-by: Thomas Gleixner <tglx@kernel.org> Link: https://patch.msgid.link/20260115-gicv5-host-acpi-v3-5-c13a9a150388@kernel.org Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
|
35866efa52 |
irqchip/gic-v5: Add ACPI IRS probing
On ARM64 ACPI systems GICv5 IRSes are described in MADT sub-entries. Add the required plumbing to parse MADT IRS firmware table entries and probe the IRS components in ACPI. Augment the irqdomain_ops.translate() for PPI and SPI IRQs in order to provide support for their ACPI based firmware translation. Implement an irqchip ACPI based callback to initialize the global GSI domain upon an MADT IRS detection. The IRQCHIP_ACPI_DECLARE() entry in the top level GICv5 driver is only used to trigger the IRS probing (ie the global GSI domain is initialized once on the first call on multi-IRS systems); IRS probing takes place by calling acpi_table_parse_madt() in the IRS sub-driver, that probes all IRSes in sequence. Add a new ACPI interrupt model so that it can be detected at runtime and distinguished from previous GIC architecture models. Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com> Acked-by: Thomas Gleixner <tglx@kernel.org> Link: https://patch.msgid.link/20260115-gicv5-host-acpi-v3-4-c13a9a150388@kernel.org Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
|
1c406fcdf0 |
irqchip/gic-v5: Split IRS probing into OF and generic portions
Split the IRS driver code into OF specific and generic portions in order to pave the way for adding ACPI firmware bindings support. Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com> Acked-by: Thomas Gleixner <tglx@kernel.org> Link: https://patch.msgid.link/20260115-gicv5-host-acpi-v3-3-c13a9a150388@kernel.org Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
|
a08df2fbba |
PCI/MSI: Make the pci_msi_map_rid_ctlr_node() interface firmware agnostic
To support booting with OF and ACPI seamlessly, GIC ITS parent code requires the PCI/MSI irqdomain layer to implement a function to retrieve an MSI controller fwnode and map an RID in a firmware agnostic way (ie pci_msi_map_rid_ctlr_node()). Convert pci_msi_map_rid_ctlr_node() to an OF agnostic interface (fwnode_handle based) and update the GIC ITS MSI parent code to reflect the pci_msi_map_rid_ctlr_node() change. Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Thomas Gleixner <tglx@kernel.org> Link: https://patch.msgid.link/20260115-gicv5-host-acpi-v3-2-c13a9a150388@kernel.org Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
|
3d9617ea8a |
irqchip/ti-sci-intr: Allow parsing interrupt-types per-line
Some INTR router instances act as simple passthroughs that preserve the source interrupt type unchanged at the output line, rather than converting all interrupts to a fixed type. When interrupt sources are not homogeneous with respect to trigger type, the driver needs to read each source's interrupt type from DT and pass it unchanged to its interrupt parent. Add support to check for absence of "ti,intr-trigger-type" to indicate passthrough mode. When this property is absent, parse interrupt type per-line from the DT fwspec provided by the interrupt source. Else, use the global setting for all interrupt lines. Signed-off-by: Aniket Limaye <a-limaye@ti.com> Signed-off-by: Thomas Gleixner <tglx@kernel.org> Link: https://patch.msgid.link/20260123-ul-driver-i2c-j722s-v4-2-b08625c487d5@ti.com |
||
|
|
8d76a7d89c |
irqchip/gic-v3-its: Avoid truncating memory addresses
On 32-bit machines with CONFIG_ARM_LPAE, it is possible for lowmem
allocations to be backed by addresses physical memory above the 32-bit
address limit, as found while experimenting with larger VMSPLIT
configurations.
This caused the qemu virt model to crash in the GICv3 driver, which
allocates the 'itt' object using GFP_KERNEL. Since all memory below
the 4GB physical address limit is in ZONE_DMA in this configuration,
kmalloc() defaults to higher addresses for ZONE_NORMAL, and the
ITS driver stores the physical address in a 32-bit 'unsigned long'
variable.
Change the itt_addr variable to the correct phys_addr_t type instead,
along with all other variables in this driver that hold a physical
address.
The gicv5 driver correctly uses u64 variables, while all other irqchip
drivers don't call virt_to_phys or similar interfaces. It's expected that
other device drivers have similar issues, but fixing this one is
sufficient for booting a virtio based guest.
Fixes:
|
||
|
|
3a74e73b86 |
irqchip/renesas-rzv2h: Add suspend/resume support
On RZ/G3E using PSCI, s2ram powers down the SoC. Add suspend/resume callbacks to restore IRQ type for NMI, TINT and external IRQ interrupts. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Signed-off-by: Thomas Gleixner <tglx@kernel.org> Link: https://patch.msgid.link/20260113125315.359967-3-biju.das.jz@bp.renesas.com |
||
|
|
a384f2ed88 |
irqchip/aslint-sswi: Fix error check of of_io_request_and_map() result
of_io_request_and_map() returns IOMEM_ERR_PTR() on failure which is
non-NULL.
Fixes:
|
||
|
|
a34d398c83 |
irqchip: Allow LoongArch irqchip drivers on both 32BIT/64BIT
All LoongArch irqchip drivers are adjusted, allow them to be built on both 32BIT and 64BIT platforms. Co-developed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Thomas Gleixner <tglx@kernel.org> Link: https://patch.msgid.link/20260113085940.3344837-8-chenhuacai@loongson.cn |
||
|
|
0370a5e740 |
irqchip/loongson-pch-pic: Adjust irqchip driver for 32BIT/64BIT
irq_domain_alloc_fwnode() takes a parameter with the phys_addr_t type. Currently we pass acpi_pchpic->address to it. This can only work on 64BIT platform because its type is u64, so cast it to phys_addr_t and then the driver works on both 32BIT and 64BIT platforms. Also use readl() to read vec_count because readq() is only available on 64BIT platform. [ tglx: Make the cast explicit and use the casted address as argument for pch_pic_init() which takes a phys_addr_t as well. Fixup coding style. More sigh... ] Co-developed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Thomas Gleixner <tglx@kernel.org> Link: https://patch.msgid.link/20260113085940.3344837-7-chenhuacai@loongson.cn |
||
|
|
4093b0e55b |
irqchip/loongson-pch-msi: Adjust irqchip driver for 32BIT/64BIT
irq_domain_alloc_fwnode() takes a parameter with the phys_addr_t type. Currently the code passe acpi_pchmsi->msg_address to it. This can only work on 64BIT platform because its type is u64, so cast it to phys_addr_t and then the driver works on both 32BIT and 64BIT platform. [ tglx: Make the cast explicit and fixup coding style. ] Co-developed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Thomas Gleixner <tglx@kernel.org> Link: https://patch.msgid.link/20260113085940.3344837-6-chenhuacai@loongson.cn |
||
|
|
04f1f17d28 |
irqchip/loongson-htvec: Adjust irqchip driver for 32BIT/64BIT
irq_domain_alloc_fwnode() takes a parameter with the phys_addr_t type. Currently the code passes acpi_htvec->address to it. This can only work on 64BIT platform because its type is u64, so cast it to phys_addr_t and then the driver works on both 32BIT and 64BIT platforms. [ tglx: Dereference _after_ the NULL pointer check, make the cast explicit and use the casted address as argument for htvec_init() which takes a phys_addr_t as well. Sigh... ] Co-developed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Thomas Gleixner <tglx@kernel.org> Link: https://patch.msgid.link/20260113085940.3344837-5-chenhuacai@loongson.cn |
||
|
|
61fb5e517e |
irqchip/loongson-eiointc: Adjust irqchip driver for 32BIT/64BIT
iocsr_read64()/iocsr_write64() are only available on 64BIT LoongArch platform, so add and use a pair of helpers, i.e. read_isr()/write_isr() instead to make the driver work on both 32BIT and 64BIT platforms. This makes eoiintc_enable() a no-op for 32-bit as it is only required on 64-bit systems. [ tglx: Make the helpers inline and fixup the variable declaration order ] Co-developed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Thomas Gleixner <tglx@kernel.org> Link: https://patch.msgid.link/20260113085940.3344837-4-chenhuacai@loongson.cn |
||
|
|
57e05137ac |
irqchip/loongson-liointc: Adjust irqchip driver for 32BIT/64BIT
irq_domain_alloc_fwnode() takes a parameter with the phys_addr_t type. Currently the code passes acpi_liointc->address to it. This can only work on 64BIT platforms because its type is u64, so cast it to phys_addr_t and then the driver works on both 32BIT and 64BIT platform. [ tglx: Make the cast explicit and use the casted address as argument for liointc_init() which takes a phys_addr_t as well. Sigh... ] Co-developed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Thomas Gleixner <tglx@kernel.org> Link: https://patch.msgid.link/20260113085940.3344837-3-chenhuacai@loongson.cn |
||
|
|
d9e7035a51 |
irqchip/loongarch-avec: Adjust irqchip driver for 32BIT/64BIT
csr_read64() is only available on 64BIT LoongArch platform, so use the recently added adaptive csr_read() instead to make the driver work on both 32BIT and 64BIT platforms. This makes avecintc_enable() a no-op for 32-bit as it is only required on 64-bit systems. Co-developed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Thomas Gleixner <tglx@kernel.org> Link: https://patch.msgid.link/20260113085940.3344837-2-chenhuacai@loongson.cn |
||
|
|
cd4a3ced4d |
irqchip/renesas-rzv2h: Prevent TINT spurious interrupt during resume
A glitch in the edge detection circuit can cause a spurious interrupt. The
hardware manual recommends clearing the status flag after setting the
ICU_TSSRk register as a countermeasure.
Currently, a spurious interrupt is generated on the resume path of s2idle
for the PMIC RTC TINT interrupt due to a glitch related to unnecessary
enabling/disabling of the TINT enable bit.
Fix this issue by not setting TSSR(TINT Source) and TITSR(TINT Detection
Method Selection) registers if the values are the same as those set
in these registers.
Fixes:
|
||
|
|
eea1a28f93 |
openrisc: Fix IPIs on simple multicore systems
Commit
|
||
|
|
94ed03a005 |
irqchip/renesas-rza1: Use for_each_of_imap_item iterator
The renesas-rza1 driver parses the interrupt-map property. It does it using open code. Recently for_each_of_imap_item iterator has been introduce to help drivers in this parsing. Convert the renesas-rza1 driver to use the for_each_of_imap_item iterator instead of open code. Signed-off-by: Herve Codina (Schneider Electric) <herve.codina@bootlin.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Thomas Gleixner <tglx@kernel.org> Link: https://patch.msgid.link/20260114093938.1089936-5-herve.codina@bootlin.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> |
||
|
|
3ac6dfe3d7 |
irqchip/ls-extirq: Use for_each_of_imap_item iterator
The ls-extirq driver parses the interrupt-map property. It does it using open code. Recently for_each_of_imap_item iterator has been introduce to help drivers in this parsing. Convert the ls-extirq driver to use the for_each_of_imap_item iterator instead of open code. Signed-off-by: Herve Codina (Schneider Electric) <herve.codina@bootlin.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Thomas Gleixner <tglx@kernel.org> Link: https://patch.msgid.link/20260114093938.1089936-4-herve.codina@bootlin.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> |
||
|
|
f2edf797da |
irqchip/riscv-imsic: Revert "Remove redundant irq_data lookups"
Commit c475c0b71314("irqchip/riscv-imsic: Remove redundant irq_data
lookups") leads to a NULL pointer deference in imsic_msi_update_msg():
virtio_blk virtio1: 8/0/0 default/read/poll queues
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
Current kworker/u32:2 pgtable: 4K pagesize, 48-bit VAs, pgdp=0x0000000081c33000
[0000000000000000] pgd=0000000000000000, p4d=0000000000000000
CPU: 5 UID: 0 PID: 75 Comm: kworker/u32:2 Not tainted 6.19.0-rc4-next-20260109 #1 NONE
epc : 0x0
ra : imsic_irq_set_affinity+0x110/0x130
The irq_data argument of imsic_irq_set_affinity() is associated with the
imsic domain and not with the top-level MSI domain. As a consequence the
code dereferences the wrong interrupt chip, which has the
irq_write_msi_msg() callback not populated.
Signed-off-by: Luo Haiyang <luo.haiyang@zte.com.cn>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260113111930821RrC26avITHWSFCN0bYbgI@zte.com.cn
|
||
|
|
a33d16dc87 |
Revert "irqchip/riscv-imsic: Embed the vector array in lpriv"
The __alloc_percpu() fails when the number of IDs are greater than 959
because size parameter of __alloc_percpu() must be less than 32768 (aka
PCPU_MIN_UNIT_SIZE). This failure is observed with KVMTOOL when AIA is
trap-n-emulated by in-kernel KVM because in this case KVM guest has 2047
interrupt IDs.
To address this issue, don't embed vector array in struct imsic_local_priv
until __alloc_percpu() support size parameter greater than 32768.
This reverts commit
|
||
|
|
1690eeb0cb |
irqchip/gic-v5: Fix gicv5_its_map_event() ITTE read endianness
Kbuild bot (through sparse) reported that the ITTE read to carry out
a valid check in gicv5_its_map_event() lacks proper endianness handling.
Add the missing endianess conversion.
Fixes:
|
||
|
|
95a8ddde36 |
irqchip/riscv-aplic: Preserve APLIC states across suspend/resume
The APLIC states might be reset when the platform enters a low power state, but the register states are not being preserved and restored, which prevents interrupt delivery after the platform resumes. Solve this by adding a syscore ops and a power management notifier to preserve and restore the APLIC states on suspend and resume. [ tglx: Folded the build fix provided by Geert ] Signed-off-by: Nick Hu <nick.hu@sifive.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Yong-Xuan Wang <yongxuan.wang@sifive.com> Reviewed-by: Cyan Yang <cyan.yang@sifive.com> Reviewed-by: Nutty Liu <liujingqi@lanxincomputing.com> Reviewed-by: Anup Patel <anup@brainfault.org> Link: https://patch.msgid.link/20251202-preserve-aplic-imsic-v3-2-1844fbf1fe92@sifive.com |
||
|
|
f48b4bd091 |
irqchip/riscv-imsic: Add a CPU pm notifier to restore the IMSIC on exit
The IMSIC might be reset when the system enters a low power state, but on exit nothing restores the registers, which prevents interrupt delivery. Solve this by registering a CPU power management notifier, which restores the IMSIC on exit. Signed-off-by: Nick Hu <nick.hu@sifive.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Yong-Xuan Wang <yongxuan.wang@sifive.com> Reviewed-by: Cyan Yang <cyan.yang@sifive.com> Reviewed-by: Anup Patel <anup@brainfault.org> Reviewed-by: Nutty Liu <liujingqi@lanxincomputing.com> Link: https://patch.msgid.link/20251202-preserve-aplic-imsic-v3-1-1844fbf1fe92@sifive.com |
||
|
|
13e7b3305b |
irqchip: Add RZ/{T2H,N2H} Interrupt Controller (ICU) driver
The Renesas RZ/T2H (R9A09G077) and Renesas RZ/N2H (R9A09G087) SoCs have an Interrupt Controller (ICU) that supports interrupts from external pins IRQ0 to IRQ15, and SEI, and software-triggered interrupts INTCPU0 to INTCPU15. INTCPU0 to INTCPU13, IRQ0 to IRQ13 are non-safety interrupts, while INTCPU14, INTCPU15, IRQ14, IRQ15 and SEI are safety interrupts, and are exposed via a separate register space. Signed-off-by: Cosmin Tanislav <cosmin-gabriel.tanislav.xa@renesas.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://patch.msgid.link/20251201112933.488801-3-cosmin-gabriel.tanislav.xa@renesas.com |
||
|
|
8d4c354bef |
irqchip/renesas-rzv2h: Add support for RZ/V2N SoC
Add support for the RZ/V2N Interrupt Control Unit (ICU) by introducing a dedicated compatible string in the irqchip driver. While the RZ/V2N ICU differs from the RZ/V2H(P) version in its register layout primarily due to a reduced set of ECCRAM related registers the irqchip driver does not currently access these registers. As a result, the RZ/V2N ICU can be safely handled by rzv2h_icu_probe for now, but it still requires a distinct compatible so that future changes can differentiate the SoCs when needed. [ tglx: Fixed up the made up subject prefix ] Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://patch.msgid.link/20251127162447.320971-3-prabhakar.mahadev-lad.rj@bp.renesas.com |
||
|
|
8a7f030df8 |
irqchip/aslint-sswi: Request IO memory resource
Make an aclint_sswi instance visible in the resource list, i.e. /proc/iomem Signed-off-by: Vladimir Kondratiev <vladimir.kondratiev@mobileye.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://patch.msgid.link/20251209142336.1061606-1-vladimir.kondratiev@mobileye.com |
||
|
|
db0130185e |
Misc fixes:
- Fix error code in the irqchip/mchp-eic driver - Fix setup_percpu_irq() affinity assumptions - Remove the unused irq_domain_add_tree() function Signed-off-by: Ingo Molnar <mingo@kernel.org> -----BEGIN PGP SIGNATURE----- iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmk74RgRHG1pbmdvQGtl cm5lbC5vcmcACgkQEnMQ0APhK1gSEw/+IwHsSH9a4fOJGwV+vlwljy3zw6Sbmfwh D8C+jtVBQwocYzb/snbTvWnHJuhGwyLh6gVcYDDwJj/8IRGXnKVm7S1UKpV/XpRl O/dhqo8uogjqVAlo7osqTlYlwSGVLBY++iYCZrt9cY/Hn1bCm0Oz19/wbSJupHqp G/aG05iX4SRDHhTI8oWp7oEnnS1Hyox/2CKYHEBQoR2BapJL10exHqnyDpQ48pgL 60LCQbPeZp5KArQ+NRkc4RbcHBW6tsBJQUPc+m71H5HJTuetxwQ7uNuc3UsaR6jI 0A/vBryzeS5d88+FO08WxAYaiSENaGBAZ7aAKVbuiSoddwuRBUhvW6OYvWIGNqJG gCk4YB9K5li/2slrQdS4BQhq8thdVGkgzcSDFiFLyYmg7NjECPpr4IWggKwFT2zn hTF6tjuanBL9jew4Zxw21WcoJa3Kz6FXwSbU+PfWUUb+xc0/zouai17vkP8qwXR6 xeMqVJCZjb88VXUvL42xqKjIYD4x6UaoUqOtXjfO7xa40XC+2KVmALRInbSdTDpa 9MsJg6Mi2C+hYPXM1fPCymbktZoBSWnzi8vGUbA9CegyP9J4Zhpl8vmDIn+mXMmB Lu7pGAotSWHnXf9oCqAJ4eioaAj4V6HtIPKkSpmQGozifYMvlEI+boIwfkS2sJWK lLGe7LH6QeU= =/KYE -----END PGP SIGNATURE----- Merge tag 'irq-urgent-2025-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Ingo Molnar: - Fix error code in the irqchip/mchp-eic driver - Fix setup_percpu_irq() affinity assumptions - Remove the unused irq_domain_add_tree() function * tag 'irq-urgent-2025-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/mchp-eic: Fix error code in mchp_eic_domain_alloc() irqdomain: Delete irq_domain_add_tree() genirq: Allow NULL affinity for setup_percpu_irq() |
||
|
|
9551a26f17 |
LoongArch changes for v6.19
1, Add basic LoongArch32 support; 2, Select HAVE_ARCH_BITREVERSE in Kconfig; 3, Fix build and boot for CONFIG_RANDSTRUCT; 4, Correct the calculation logic of thread_count; 5, Some bug fixes and other small changes. Note: Build infrastructures of LoongArch32 are not enabled yet, because we need to adjust irqchip drivers and wait for GNU toolchain be upstream first. -----BEGIN PGP SIGNATURE----- iQJKBAABCAA0FiEEzOlt8mkP+tbeiYy5AoYrw/LiJnoFAmk2pCUWHGNoZW5odWFj YWlAa2VybmVsLm9yZwAKCRAChivD8uImevedD/9glTZwBqWOnBIaw1ldxfmoEQS2 PCFxxZPG+cHO3Kgg5LrMgz/2UI2bOnrcx5a7Ma0v4TDFyH9Cp/p4NGosndsq5b1v 3xoPXytKjiKJMyWNAZy7ytP8FmYs0v6rIu3ZvW6N4GPyNm3VC96LdxXtAXnio134 TruTALLZ6U/EDUz6VmyRgWAR8HXgS08v3Vuh4giZABRHQAWM7u8tUxGZNvjkLqKb TsQz8Ko42VEkbwD5MCMIQrviJBOReycANU9jlmJ1JNsJVKjqcjtSpCpO5cnJg3iL 93M3wiTy/iWrIdQwjGeXgqco8iQItozVIf0FwVum82OLyoxx7G9qZAx5aQg4zjkA JvFB0Quecs8e3HaGJCPGytv2r56cMTh73KzarZBXhCPDLun2pssLtqVwYxw/7KOB MoVOekFQs6+8Un9Rffrj6PGeZQwflpsp7Z4khEpf4qULuI6BpRCFLojFhwk6e4V/ DzoYmdpg1TnwNlp74aMv7gWDfnBBfKXDAswbtyfU/aY0+jrf0f5pNfT100Dd0PAw VNzNjkH/JGml/0iqf7T3p6h/XalR7/obsg4O4L39I6A1CL3gkZf35jtMtzf7RsIp cVYtumlFvrU7hzKpKcq0OXFji7/8HbAOgrIno5MQGjFfKPJPk+wb5XpgWKdhVtC1 Y94az2s8PmYA4/v9QA== =G9hi -----END PGP SIGNATURE----- Merge tag 'loongarch-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson Pull LoongArch updates from Huacai Chen: - Add basic LoongArch32 support Note: Build infrastructures of LoongArch32 are not enabled yet, because we need to adjust irqchip drivers and wait for GNU toolchain be upstream first. - Select HAVE_ARCH_BITREVERSE in Kconfig - Fix build and boot for CONFIG_RANDSTRUCT - Correct the calculation logic of thread_count - Some bug fixes and other small changes * tag 'loongarch-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: (22 commits) LoongArch: Adjust default config files for 32BIT/64BIT LoongArch: Adjust VDSO/VSYSCALL for 32BIT/64BIT LoongArch: Adjust misc routines for 32BIT/64BIT LoongArch: Adjust user accessors for 32BIT/64BIT LoongArch: Adjust system call for 32BIT/64BIT LoongArch: Adjust module loader for 32BIT/64BIT LoongArch: Adjust time routines for 32BIT/64BIT LoongArch: Adjust process management for 32BIT/64BIT LoongArch: Adjust memory management for 32BIT/64BIT LoongArch: Adjust boot & setup for 32BIT/64BIT LoongArch: Adjust common macro definitions for 32BIT/64BIT LoongArch: Add adaptive CSR accessors for 32BIT/64BIT LoongArch: Add atomic operations for 32BIT/64BIT LoongArch: Add new PCI ID for pci_fixup_vgadev() LoongArch: Add and use some macros for AVEC LoongArch: Correct the calculation logic of thread_count LoongArch: Use unsigned long for _end and _text LoongArch: Use __pmd()/__pte() for swap entry conversions LoongArch: Fix arch_dup_task_struct() for CONFIG_RANDSTRUCT LoongArch: Fix build errors for CONFIG_RANDSTRUCT ... |