commit 9cc0eafd28 upstream.
When a system is being suspended to RAM, the PCI devices are also
suspended and the PPC code ends up calling pseries_msi_compose_msg() and
this triggers the BUG_ON() in __pci_read_msi_msg() because the device at
this point is in reduced power state. In reduced power state, the memory
mapped registers of the PCI device are not accessible.
To replicate the bug:
1. Make sure deep sleep is selected
# cat /sys/power/mem_sleep
s2idle [deep]
2. Make sure console is not suspended (so that dmesg logs are visible)
echo N > /sys/module/printk/parameters/console_suspend
3. Suspend the system
echo mem > /sys/power/state
To fix this behaviour, read the cached msi message of the device when the
device is not in PCI_D0 power state instead of touching the hardware.
Fixes: a5f3d2c17b ("powerpc/pseries/pci: Add MSI domains")
Cc: stable@vger.kernel.org # v5.15+
Signed-off-by: Gautam Menghani <gautam@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Reviewed-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250305090237.294633-1-gautam@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8b68e97871 upstream.
io_bitmap_exit() is invoked from exit_thread() when a task exists or
when a fork fails. In the latter case the exit_thread() cleans up
resources which were allocated during fork().
io_bitmap_exit() invokes task_update_io_bitmap(), which in turn ends up
in tss_update_io_bitmap(). tss_update_io_bitmap() operates on the
current task. If current has TIF_IO_BITMAP set, but no bitmap installed,
tss_update_io_bitmap() crashes with a NULL pointer dereference.
There are two issues, which lead to that problem:
1) io_bitmap_exit() should not invoke task_update_io_bitmap() when
the task, which is cleaned up, is not the current task. That's a
clear indicator for a cleanup after a failed fork().
2) A task should not have TIF_IO_BITMAP set and neither a bitmap
installed nor IOPL emulation level 3 activated.
This happens when a kernel thread is created in the context of
a user space thread, which has TIF_IO_BITMAP set as the thread
flags are copied and the IO bitmap pointer is cleared.
Other than in the failed fork() case this has no impact because
kernel threads including IO workers never return to user space and
therefore never invoke tss_update_io_bitmap().
Cure this by adding the missing cleanups and checks:
1) Prevent io_bitmap_exit() to invoke task_update_io_bitmap() if
the to be cleaned up task is not the current task.
2) Clear TIF_IO_BITMAP in copy_thread() unconditionally. For user
space forks it is set later, when the IO bitmap is inherited in
io_bitmap_share().
For paranoia sake, add a warning into tss_update_io_bitmap() to catch
the case, when that code is invoked with inconsistent state.
Fixes: ea5f1cd7ab ("x86/ioperm: Remove bitmap if all permissions dropped")
Reported-by: syzbot+e2b1803445d236442e54@syzkaller.appspotmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/87wmdceom2.ffs@tglx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7f9bbc1140 upstream.
dm_op hypercalls might come from userspace and pass memory addresses as
parameters. The memory addresses typically correspond to buffers
allocated in userspace to hold extra hypercall parameters.
On ARM, when CONFIG_ARM64_SW_TTBR0_PAN is enabled, they might not be
accessible by Xen, as a result ioreq hypercalls might fail. See the
existing comment in arch/arm64/xen/hypercall.S regarding privcmd_call
for reference.
For privcmd_call, Linux calls uaccess_ttbr0_enable before issuing the
hypercall thanks to commit 9cf09d68b8. We need to do the same for
dm_op. This resolves the problem.
Cc: stable@kernel.org
Fixes: 9cf09d68b8 ("arm64: xen: Enable user access before a privcmd hvc call")
Signed-off-by: Stefano Stabellini <stefano.stabellini@amd.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Message-ID: <alpine.DEB.2.22.394.2505121446370.8380@ubuntu-linux-20-04-desktop>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 08f6554ff9 upstream.
A future change will move CLANG_FLAGS from KBUILD_{A,C}FLAGS to
KBUILD_CPPFLAGS so that '--target' is available while preprocessing.
When that occurs, the following error appears when building ARCH=mips
with clang (tip of tree error shown):
clang: error: unsupported option '-mabi=' for target 'x86_64-pc-linux-gnu'
Add KBUILD_CPPFLAGS in the CHECKFLAGS invocation to keep everything
working after the move.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0d67f0dee6 ]
The user space calls mmap() to map VAS window paste address
and the kernel returns the complete mapped page for each
window. So return -EINVAL if non-zero is passed for offset
parameter to mmap().
See Documentation/arch/powerpc/vas-api.rst for mmap()
restrictions.
Co-developed-by: Jonathan Greental <yonatan02greental@gmail.com>
Signed-off-by: Jonathan Greental <yonatan02greental@gmail.com>
Reported-by: Jonathan Greental <yonatan02greental@gmail.com>
Fixes: dda44eb29c ("powerpc/vas: Add VAS user space API")
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250610021227.361980-2-maddy@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cd097df459 ]
memtrace mmap issue has an out of bounds issue. This patch fixes the by
checking that the requested mapping region size should stay within the
allocated region size.
Reported-by: Jonathan Greental <yonatan02greental@gmail.com>
Fixes: 08a022ad3d ("powerpc/powernv/memtrace: Allow mmaping trace buffers")
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250610021227.361980-1-maddy@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b04f0d89e8 ]
The two alarm LEDs of on the uDPU board are stopped working since
commit 78efa53e71 ("leds: Init leds class earlier").
The LEDs are driven by the GPIO{15,16} pins of the North Bridge
GPIO controller. These pins are part of the 'spi_quad' pin group
for which the 'spi' function is selected via the default pinctrl
state of the 'spi' node. This is wrong however, since in order to
allow controlling the LEDs, the pins should use the 'gpio' function.
Before the commit mentined above, the 'spi' function is selected
first by the pinctrl core before probing the spi driver, but then
it gets overridden to 'gpio' implicitly via the
devm_gpiod_get_index_optional() call from the 'leds-gpio' driver.
After the commit, the LED subsystem gets initialized before the
SPI subsystem, so the function of the pin group remains 'spi'
which in turn prevents controlling of the LEDs.
Despite the change of the initialization order, the root cause is
that the pinctrl state definition is wrong since its initial commit
0d45062cfc ("arm64: dts: marvell: Add device tree for uDPU board"),
To fix the problem, override the function in the 'spi_quad_pins'
node to 'gpio' and move the pinctrl state definition from the
'spi' node into the 'leds' node.
Cc: stable@vger.kernel.org # needs adjustment for < 6.1
Fixes: 0d45062cfc ("arm64: dts: marvell: Add device tree for uDPU board")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e4f59f873c ]
The ASPEED devices have SRAM, but don't require it for basic function
(or any function; there's no known users of the driver).
Fixes: 8c2ed9bcfb ("arm: Add Aspeed machine")
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://patch.msgid.link/20250115103942.421429-1-joel@jms.id.au
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cfe035d866 ]
Rename the node 'mt6359rtc' to 'rtc', as required by the binding.
Fix the following dtb-check error:
mediatek/mt8395-radxa-nio-12l.dtb: pmic: 'mt6359rtc' do not match
any of the regexes: 'pinctrl-[0-9]+'
Fixes: 3b7d143be4 ("arm64: dts: mt6359: add PMIC MT6359 related nodes")
Signed-off-by: Julien Massot <julien.massot@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250514-mt8395-dtb-errors-v2-3-d67b9077c59a@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit febd8c6ab5 ]
The u2phy0_host port is the part of the USB PHY0 (namely the
HOST0_DP/DM lanes) which routes directly to the USB2.0 HOST
controller[1]. The other lanes of the PHY are routed to the USB3.0 OTG
controller (dwc3), which we do use.
The HOST0_DP/DM lanes aren't routed on RK3399 Puma so let's simply
disable the USB2.0 controllers.
USB3 OTG has been known to be unstable on RK3399 Puma Haikou for a
while, one of the recurring issues being that only USB2 is detected and
not USB3 in host mode. Reading the justification above and seeing that
we are keeping u2phy0_host in the Haikou carrierboard DTS probably may
have bothered you since it should be changed to u2phy0_otg. The issue is
that if it's switched to that, USB OTG on Haikou is entirely broken. I
have checked the routing in the Gerber file, the lanes are going to the
expected ball pins (that is, NOT HOST0_DP/DM).
u2phy0_host is for sure the wrong part of the PHY to use, but it's the
only one that works at the moment for that board so keep it until we
figure out what exactly is broken.
No intended functional change.
[1] https://rockchip.fr/Rockchip%20RK3399%20TRM%20V1.3%20Part2.pdf
Chapter 2 USB2.0 PHY
Fixes: 2c66fc34e9 ("arm64: dts: rockchip: add RK3399-Q7 (Puma) SoM")
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Signed-off-by: Lukasz Czechowski <lukasz.czechowski@thaumatec.com>
Link: https://lore.kernel.org/r/20250425-onboard_usb_dev-v2-5-4a76a474a010@thaumatec.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f52cd248d8 ]
The mediatek display driver fails to probe on mt8173-elm-hana and
mt8183-kukui-jacuzzi-juniper-sku16 in v6.14-rc4 due to missing PHY
configurations.
Commit 924d66011f ("drm/mediatek: stop selecting foreign drivers")
stopped selecting the MediaTek PHY drivers, requiring them to be
explicitly enabled in defconfig.
Enable the following PHY drivers for MediaTek platforms:
CONFIG_PHY_MTK_HDMI=m for HDMI display
CONFIG_PHY_MTK_MIPI_DSI=m for DSI display
CONFIG_PHY_MTK_DP=m for DP display
Fixes: 924d66011f ("drm/mediatek: stop selecting foreign drivers")
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Vignesh Raman <vignesh.raman@collabora.com>
Link: https://lore.kernel.org/r/20250512131933.1247830-1-vignesh.raman@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1fe38d2a19 ]
The 'compatible' property is required by the
'mfd/mediatek,mt6397.yaml' binding. Add it to fix the following
dtb-check error:
mediatek/mt8395-radxa-nio-12l.dtb: pmic: regulators:
'compatible' is a required property
Fixes: 3b7d143be4 ("arm64: dts: mt6359: add PMIC MT6359 related nodes")
Signed-off-by: Julien Massot <julien.massot@collabora.com>
Link: https://lore.kernel.org/r/20250505-mt8395-dtb-errors-v1-3-9c4714dcdcdb@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c3f03bec30 ]
Although not noticeable when used every day, the RTC appears to drift when
left to sit over time. This is due to the capacitive load not being
properly set. Fix RTC drift by correcting the capacitive load setting
from 7000 to 12500, which matches the actual hardware configuration.
Fixes: 36ca3c8ccb ("arm64: dts: imx: Add Beacon i.MX8M Nano development kit")
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2e98d45666 ]
Although not noticeable when used every day, the RTC appears to drift when
left to sit over time. This is due to the capacitive load not being
properly set. Fix RTC drift by correcting the capacitive load setting
from 7000 to 12500, which matches the actual hardware configuration.
Fixes: 593816fa2f ("arm64: dts: imx: Add Beacon i.MX8m-Mini development kit")
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2eca6af667 ]
During initial porting these cd-gpios were missed. Having card detect is
beneficial because driver does not need to do polling every second and it
can just use IRQ. SD card detection in U-Boot is also fixed by this.
Fixes: cf85e9aee2 ("arm64: dts: qcom: sdm660-xiaomi-lavender: Add eMMC and SD")
Signed-off-by: Alexey Minnekhanov <alexeymin@postmarketos.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250415130101.1429281-1-alexeymin@postmarketos.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 394f290333 ]
By hardware, the first and second core of the video decoder IP
need the VDEC_SOC to be powered up in order to be able to be
accessed (both internally, by firmware, and externally, by the
kernel).
Similarly, for the video encoder IP, the second core needs the
first core to be powered up in order to be accessible.
Fix that by reparenting the VDEC1/2 power domains to be children
of VDEC0 (VDEC_SOC), and the VENC1 to be a child of VENC0.
Fixes: 2b515194bf ("arm64: dts: mt8195: Add power domains controller")
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20250402090615.25871-3-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c72ede1c24 ]
NAND did not work on my USB-A9263. I discovered that the offending
commit converted the PIO bank for chip selects wrongly, so all A9263
boards need to be fixed.
Fixes: 1004a2977b ("ARM: dts: at91: Switch to the new NAND bindings")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20250402210446.5972-2-wsa+renesas@sang-engineering.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 67ba341e57 ]
Dataflash did not work on my board. After checking schematics and using
the proper GPIO, it works now. Also, make it active low to avoid:
flash@0 enforce active low on GPIO handle
Fixes: 2432d20146 ("ARM: at91: dt: usb-a9263: add dataflash support")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20250404112742.67416-2-wsa+renesas@sang-engineering.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 28f997b899 ]
There is a typo in cpu7_opp9. Fix it to get rid of the following
errors.
[ 0.198043] cpu cpu7: Voltage update failed freq=1747200
[ 0.198052] cpu cpu7: failed to update OPP for freq=1747200
Fixes: 8e0e8016cb ("arm64: dts: qcom: sm8250: Add CPU opp tables")
Signed-off-by: Xilin Wu <wuxilin123@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250308-fix-sm8250-cpufreq-v1-1-8a0226721399@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5f55f21684 ]
Currently a crash in a leaf prog (caused by a bug) produces the
following call trace:
[<000003ff600ebf00>] bpf_prog_6df0139e1fbf2789_fentry+0x20/0x78
[<0000000000000000>] 0x0
This is because leaf progs do not store backchain. Fix by making all
progs do it. This is what GCC and Clang-generated code does as well.
Now the call trace looks like this:
[<000003ff600eb0f2>] bpf_prog_6df0139e1fbf2789_fentry+0x2a/0x80
[<000003ff600ed096>] bpf_trampoline_201863462940+0x96/0xf4
[<000003ff600e3a40>] bpf_prog_05f379658fdd72f2_classifier_0+0x58/0xc0
[<000003ffe0aef070>] bpf_test_run+0x210/0x390
[<000003ffe0af0dc2>] bpf_prog_test_run_skb+0x25a/0x668
[<000003ffe038a90e>] __sys_bpf+0xa46/0xdb0
[<000003ffe038ad0c>] __s390x_sys_bpf+0x44/0x50
[<000003ffe0defea8>] __do_syscall+0x150/0x280
[<000003ffe0e01d5c>] system_call+0x74/0x98
Fixes: 0546231057 ("s390/bpf: Add s390x eBPF JIT compiler backend")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20250512122717.54878-1-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f101c56447 ]
When the 52-bit virtual addressing was introduced the select like
ARCH_MMAP_RND_BITS_MAX logic was never updated to account for it.
Because of that the rnd max bits knob is set to the default value of 18
when ARM64_VA_BITS=52.
Fix this by setting ARCH_MMAP_RND_BITS_MAX to the same value that would
be used if 48-bit addressing was used. Higher values can't used here
because 52-bit addressing is used only if the caller provides a hint to
mmap, with a fallback to 48-bit. The knob in question is an upper bound
for what the user can set in /proc/sys/vm/mmap_rnd_bits, which in turn
is used to determine how many random bits can be inserted into the base
address used for mmap allocations. Since 48-bit allocations are legal
with ARM64_VA_BITS=52, we need to make sure that the base address is
small enough to facilitate this.
Fixes: b6d00d47e8 ("arm64: mm: Introduce 52-bit Kernel VAs")
Signed-off-by: Kornel Dulęba <korneld@google.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20250417114754.3238273-1-korneld@google.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 52ae3f5da7 ]
When booted on my Mac II, the kernel prints this:
Detected Macintosh model: 6
Apple Macintosh Unknown
The catch-all entry ("Unknown") is mac_data_table[0] which is only needed
in the unlikely event that the bootinfo model ID can't be matched.
When model ID is 6, the search should begin and end at mac_data_table[1].
Fix the off-by-one error that causes this problem.
Cc: Joshua Thompson <funaho@jurai.org>
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/d0f30a551064ca4810b1c48d5a90954be80634a9.1745453246.git.fthain@linux-m68k.org
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c94f2f3261 ]
For backwards compatibility reasons, when a signal return occurs which
restores SVE state, the effective lower 128 bits of each of the SVE
vector registers are restored from the corresponding FPSIMD vector
register in the FPSIMD signal frame, overriding the values in the SVE
signal frame. This is intended to be the case regardless of streaming
mode.
To make this happen, restore_sve_fpsimd_context() uses
fpsimd_update_current_state() to merge the lower 128 bits from the
FPSIMD signal frame into the SVE register state. Unfortunately,
fpsimd_update_current_state() performs this merging dependent upon
TIF_SVE, which is not always correct for streaming SVE register state:
* When restoring non-streaming SVE register state there is no observable
problem, as the signal return code configures TIF_SVE and the saved
fp_type to match before calling fpsimd_update_current_state(), which
observes either:
- TIF_SVE set AND fp_type == FP_STATE_SVE
- TIF_SVE clear AND fp_type == FP_STATE_FPSIMD
* On systems which have SME but not SVE, TIF_SVE cannot be set. Thus the
merging will never happen for the streaming SVE register state.
* On systems which have SVE and SME, TIF_SVE can be set and cleared
independently of PSTATE.SM. Thus the merging may or may not happen for
streaming SVE register state.
As TIF_SVE can be cleared non-deterministically during syscalls
(including at the start of sigreturn()), the merging may occur
non-deterministically from the perspective of userspace.
This logic has been broken since its introduction in commit:
85ed24dad2 ("arm64/sme: Implement streaming SVE signal handling")
... at which point both fpsimd_signal_preserve_current_state() and
fpsimd_update_current_state() only checked TIF SVE. When PSTATE.SM==1
and TIF_SVE was clear, signal delivery would place stale FPSIMD state
into the FPSIMD signal frame, and signal return would not merge this
into the restored register state.
Subsequently, signal delivery was fixed as part of commit:
61da7c8e2a ("arm64/signal: Don't assume that TIF_SVE means we saved SVE state")
... but signal restore was not given a corresponding fix, and when
TIF_SVE was clear, signal restore would still fail to merge the FPSIMD
state into the restored SVE register state. The 'Fixes' tag did not
indicate that this had been broken since its introduction.
Fix this by merging the FPSIMD state dependent upon the saved fp_type,
matching what we (currently) do during signal delivery.
As described above, when backporting this commit, it will also be
necessary to backport commit:
61da7c8e2a ("arm64/signal: Don't assume that TIF_SVE means we saved SVE state")
... and prior to commit:
baa8515281 ("arm64/fpsimd: Track the saved FPSIMD state type separately to TIF_SVE")
... it will be necessary for fpsimd_signal_preserve_current_state() and
fpsimd_update_current_state() to consider both TIF_SVE and
thread_sm_enabled(¤t->thread), in place of the saved fp_type.
Fixes: 85ed24dad2 ("arm64/sme: Implement streaming SVE signal handling")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250409164010.3480271-10-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d3eaab3c70 ]
The logic for handling SME traps manipulates saved FPSIMD/SVE/SME state
incorrectly, and a race with preemption can result in a task having
TIF_SME set and TIF_FOREIGN_FPSTATE clear even though the live CPU state
is stale (e.g. with SME traps enabled). This can result in warnings from
do_sme_acc() where SME traps are not expected while TIF_SME is set:
| /* With TIF_SME userspace shouldn't generate any traps */
| if (test_and_set_thread_flag(TIF_SME))
| WARN_ON(1);
This is very similar to the SVE issue we fixed in commit:
751ecf6afd ("arm64/sve: Discard stale CPU state when handling SVE traps")
The race can occur when the SME trap handler is preempted before and
after manipulating the saved FPSIMD/SVE/SME state, starting and ending on
the same CPU, e.g.
| void do_sme_acc(unsigned long esr, struct pt_regs *regs)
| {
| // Trap on CPU 0 with TIF_SME clear, SME traps enabled
| // task->fpsimd_cpu is 0.
| // per_cpu_ptr(&fpsimd_last_state, 0) is task.
|
| ...
|
| // Preempted; migrated from CPU 0 to CPU 1.
| // TIF_FOREIGN_FPSTATE is set.
|
| get_cpu_fpsimd_context();
|
| /* With TIF_SME userspace shouldn't generate any traps */
| if (test_and_set_thread_flag(TIF_SME))
| WARN_ON(1);
|
| if (!test_thread_flag(TIF_FOREIGN_FPSTATE)) {
| unsigned long vq_minus_one =
| sve_vq_from_vl(task_get_sme_vl(current)) - 1;
| sme_set_vq(vq_minus_one);
|
| fpsimd_bind_task_to_cpu();
| }
|
| put_cpu_fpsimd_context();
|
| // Preempted; migrated from CPU 1 to CPU 0.
| // task->fpsimd_cpu is still 0
| // If per_cpu_ptr(&fpsimd_last_state, 0) is still task then:
| // - Stale HW state is reused (with SME traps enabled)
| // - TIF_FOREIGN_FPSTATE is cleared
| // - A return to userspace skips HW state restore
| }
Fix the case where the state is not live and TIF_FOREIGN_FPSTATE is set
by calling fpsimd_flush_task_state() to detach from the saved CPU
state. This ensures that a subsequent context switch will not reuse the
stale CPU state, and will instead set TIF_FOREIGN_FPSTATE, forcing the
new state to be reloaded from memory prior to a return to userspace.
Note: this was originallly posted as [1].
Fixes: 8bd7f91c03 ("arm64/sme: Implement traps and syscall handling for SME")
Reported-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/linux-arm-kernel/20241204-arm64-sme-reenable-v2-1-bae87728251d@kernel.org/
[ Rutland: rewrite commit message ]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250409164010.3480271-6-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 824c6384e8 ]
When suspending, save_processor_state() calls mtrr_save_fixed_ranges()
to save fixed-range MTRRs.
On platforms without fixed-range MTRRs like the ACRN hypervisor which
has removed fixed-range MTRR emulation, accessing these MSRs will
trigger an unchecked MSR access error. Make sure fixed-range MTRRs are
supported before access to prevent such error.
Since mtrr_state.have_fixed is only set when MTRRs are present and
enabled, checking the CPU feature flag in mtrr_save_fixed_ranges() is
unnecessary.
Fixes: 3ebad59056 ("[PATCH] x86: Save and restore the fixed-range MTRRs of the BSP when suspending")
Signed-off-by: Jiaqing Zhao <jiaqing.zhao@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250509170633.3411169-2-jiaqing.zhao@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cc663ba3fe ]
CPUID(0x80000000).EAX returns the max extended CPUID leaf available. On
x86-32 machines without an extended CPUID range, a CPUID(0x80000000)
query will just repeat the output of the last valid standard CPUID leaf
on the CPU; i.e., a garbage values. Current tip:x86/cpu code protects against
this by doing:
eax = cpuid_eax(0x80000000);
c->extended_cpuid_level = eax;
if ((eax & 0xffff0000) == 0x80000000) {
// CPU has an extended CPUID range. Check for 0x80000001
if (eax >= 0x80000001) {
cpuid(0x80000001, ...);
}
}
This is correct so far. Afterwards though, the same possibly broken EAX
value is used to check the availability of other extended CPUID leaves:
if (c->extended_cpuid_level >= 0x80000007)
...
if (c->extended_cpuid_level >= 0x80000008)
...
if (c->extended_cpuid_level >= 0x8000000a)
...
if (c->extended_cpuid_level >= 0x8000001f)
...
which is invalid. Fix this by immediately setting the CPU's max extended
CPUID leaf to zero if CPUID(0x80000000).EAX doesn't indicate a valid
CPUID extended range.
While at it, add a comment, similar to kernel/head_32.S, clarifying the
CPUID(0x80000000) sanity check.
References: 8a50e5135a ("x86-32: Use symbolic constants, safer CPUID when enabling EFER.NX")
Fixes: 3da99c9776 ("x86: make (early)_identify_cpu more the same between 32bit and 64 bit")
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: x86-cpuid@lists.linux.dev
Link: https://lore.kernel.org/r/20250506050437.10264-3-darwi@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 882b25af26 ]
In non-smp configurations, crash_kexec_prepare is never called in
the crash shutdown path. One result of this is that the crashing_cpu
variable is never set, preventing crash_save_cpu from storing the
NT_PRSTATUS elf note in the core dump.
Fixes: c7255058b5 ("powerpc/crash: save cpu register data in crash_smp_send_stop()")
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250211162054.857762-1-eajames@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ab09da7570 ]
Building the kernel with O= is affected by stale in-tree build artifacts.
So, if the source tree is not clean, Kbuild displays the following:
$ make ARCH=um O=build defconfig
make[1]: Entering directory '/.../linux/build'
***
*** The source tree is not clean, please run 'make ARCH=um mrproper'
*** in /.../linux
***
make[2]: *** [/.../linux/Makefile:673: outputmakefile] Error 1
make[1]: *** [/.../linux/Makefile:248: __sub-make] Error 2
make[1]: Leaving directory '/.../linux/build'
make: *** [Makefile:248: __sub-make] Error 2
Usually, running 'make mrproper' is sufficient for cleaning the source
tree for out-of-tree builds.
However, building UML generates build artifacts not only in arch/um/,
but also in the SUBARCH directory (i.e., arch/x86/). If in-tree stale
files remain under arch/x86/, Kbuild will reuse them instead of creating
new ones under the specified build directory.
This commit makes 'make ARCH=um clean' recurse into the SUBARCH directory.
Reported-by: Shuah Khan <skhan@linuxfoundation.org>
Closes: https://lore.kernel.org/lkml/20250502172459.14175-1-skhan@linuxfoundation.org/
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 295217420a upstream.
There is a typo in sm8350.dts where the node label
mmeory@85200000 should be memory@85200000.
This patch corrects the typo for clarity and consistency.
Fixes: b7e8f433a6 ("arm64: dts: qcom: Add basic devicetree support for SM8350 SoC")
Cc: stable@vger.kernel.org
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Link: https://lore.kernel.org/r/20250514114656.2307828-1-alok.a.tiwari@oracle.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7170130e4c upstream.
As Bert Karwatzki reported, the following recent commit causes a
performance regression on AMD iGPU and dGPU systems:
7ffb791423 ("x86/kaslr: Reduce KASLR entropy on most x86 systems")
It exposed a bug with nokaslr and zone device interaction.
The root cause of the bug is that, the GPU driver registers a zone
device private memory region. When KASLR is disabled or the above commit
is applied, the direct_map_physmem_end is set to much higher than 10 TiB
typically to the 64TiB address. When zone device private memory is added
to the system via add_pages(), it bumps up the max_pfn to the same
value. This causes dma_addressing_limited() to return true, since the
device cannot address memory all the way up to max_pfn.
This caused a regression for games played on the iGPU, as it resulted in
the DMA32 zone being used for GPU allocations.
Fix this by not bumping up max_pfn on x86 systems, when pgmap is passed
into add_pages(). The presence of pgmap is used to determine if device
private memory is being added via add_pages().
More details:
devm_request_mem_region() and request_free_mem_region() request for
device private memory. iomem_resource is passed as the base resource
with start and end parameters. iomem_resource's end depends on several
factors, including the platform and virtualization. On x86 for example
on bare metal, this value is set to boot_cpu_data.x86_phys_bits.
boot_cpu_data.x86_phys_bits can change depending on support for MKTME.
By default it is set to the same as log2(direct_map_physmem_end) which
is 46 to 52 bits depending on the number of levels in the page table.
The allocation routines used iomem_resource's end and
direct_map_physmem_end to figure out where to allocate the region.
[ arch/powerpc is also impacted by this problem, but this patch does not fix
the issue for PowerPC. ]
Testing:
1. Tested on a virtual machine with test_hmm for zone device inseration
2. A previous version of this patch was tested by Bert, please see:
https://lore.kernel.org/lkml/d87680bab997fdc9fb4e638983132af235d9a03a.camel@web.de/
[ mingo: Clarified the comments and the changelog. ]
Reported-by: Bert Karwatzki <spasswolf@web.de>
Tested-by: Bert Karwatzki <spasswolf@web.de>
Fixes: 7ffb791423 ("x86/kaslr: Reduce KASLR entropy on most x86 systems")
Signed-off-by: Balbir Singh <balbirs@nvidia.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: David Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona@ffwll.ch>
Link: https://lore.kernel.org/r/20250401000752.249348-1-balbirs@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 573f99c758 ]
This reverts commit 531fdbeede.
Hardware that uses I2C wasn't designed with high speeds in mind, so
communication with PMIC via RSB can intermittently fail. Go back to I2C
as higher speed and efficiency isn't worth the trouble.
Fixes: 531fdbeede ("arm64: dts: allwinner: h6: Use RSB for AXP805 PMIC connection")
Link: https://github.com/LibreELEC/LibreELEC.tv/issues/7731
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250413135848.67283-1-jernej.skrabec@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 46dcf85566 ]
IBS Op uses two counters: MaxCnt and CurCnt. MaxCnt is programmed with
the desired sample period. IBS hw generates sample when CurCnt reaches
to MaxCnt. The size of these counter used to be 20 bits but later they
were extended to 27 bits. The 7 bit extension is indicated by CPUID
Fn8000_001B_EAX[6 / OpCntExt].
perf_ibs->cnt_mask variable contains bit masks for MaxCnt and CurCnt.
But IBS driver does not set upper 7 bits of CurCnt in cnt_mask even
when OpCntExt CPUID bit is set. Fix this.
IBS driver uses cnt_mask[CurCnt] bits only while disabling an event.
Fortunately, CurCnt bits are not read from MSR while re-enabling the
event, instead MaxCnt is programmed with desired period and CurCnt is
set to 0. Hence, we did not see any issues so far.
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/r/20250115054438.1021-5-ravi.bangoria@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2ffb26afa6 ]
perf mem report aborts as below sometimes (during some corner
case) in powerpc:
# ./perf mem report 1>out
*** stack smashing detected ***: terminated
Aborted (core dumped)
The backtrace is as below:
__pthread_kill_implementation ()
raise ()
abort ()
__libc_message
__fortify_fail
__stack_chk_fail
hist_entry.lvl_snprintf
__sort__hpp_entry
__hist_entry__snprintf
hists.fprintf
cmd_report
cmd_mem
Snippet of code which triggers the issue
from tools/perf/util/sort.c
static int hist_entry__lvl_snprintf(struct hist_entry *he, char *bf,
size_t size, unsigned int width)
{
char out[64];
perf_mem__lvl_scnprintf(out, sizeof(out), he->mem_info);
return repsep_snprintf(bf, size, "%-*s", width, out);
}
The value of "out" is filled from perf_mem_data_src value.
Debugging this further showed that for some corner cases, the
value of "data_src" was pointing to wrong value. This resulted
in bigger size of string and causing stack check fail.
The perf mem data source values are captured in the sample via
isa207_get_mem_data_src function. The initial check is to fetch
the type of sampled instruction. If the type of instruction is
not valid (not a load/store instruction), the function returns.
Since 'commit e16fd7f2cb ("perf: Use sample_flags for data_src")',
data_src field is not initialized by the perf_sample_data_init()
function. If the PMU driver doesn't set the data_src value to zero if
type is not valid, this will result in uninitailised value for data_src.
The uninitailised value of data_src resulted in stack check fail
followed by abort for "perf mem report".
When requesting for data source information in the sample, the
instruction type is expected to be load or store instruction.
In ISA v3.0, due to hardware limitation, there are corner cases
where the instruction type other than load or store is observed.
In ISA v3.0 and before values "0" and "7" are considered reserved.
In ISA v3.1, value "7" has been used to indicate "larx/stcx".
Drop the sample if instruction type has reserved values for this
field with a ISA version check. Initialize data_src to zero in
isa207_get_mem_data_src if the instruction type is not load/store.
Reported-by: Disha Goel <disgoel@linux.vnet.ibm.com>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250121131621.39054-1-atrajeev@linux.vnet.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 00a134fc2b ]
The pm-cps code has up until now used per-CPU variables indexed by core,
rather than CPU number, in order to share data amongst sibling CPUs (ie.
VPs/threads in a core). This works fine for single cluster systems, but
with multi-cluster systems a core number is no longer unique in the
system, leading to sharing between CPUs that are not actually siblings.
Avoid this issue by using per-CPU variables as they are more generally
used - ie. access them using CPU numbers rather than core numbers.
Sharing between siblings is then accomplished by:
- Assigning the same pointer to entries for each sibling CPU for the
nc_asm_enter & ready_count variables, which allow this by virtue of
being per-CPU pointers.
- Indexing by the first CPU set in a CPUs cpu_sibling_map in the case
of pm_barrier, for which we can't use the previous approach because
the per-CPU variable is not a pointer.
Signed-off-by: Paul Burton <paulburton@kernel.org>
Signed-off-by: Dragan Mladjenovic <dragan.mladjenovic@syrmia.com>
Signed-off-by: Aleksandar Rikalo <arikalo@gmail.com>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Tested-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 756276ce78 ]
On MIPS system, most of the syscall function name begin with prefix
sys_. Some syscalls are special such as clone/fork, function name of
these begin with __sys_. Since scratch registers need be saved in
stack when these system calls happens.
With ftrace system call method, system call functions are declared with
SYSCALL_DEFINEx, metadata of the system call symbol name begins with
sys_. Here mips specific function arch_syscall_match_sym_name is used to
compare function name between sys_call_table[] and metadata of syscall
symbol.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7ffb791423 ]
When CONFIG_PCI_P2PDMA=y (which is basically enabled on all
large x86 distros), it maps the PFN's via a ZONE_DEVICE
mapping using devm_memremap_pages(). The mapped virtual
address range corresponds to the pci_resource_start()
of the BAR address and size corresponding to the BAR length.
When KASLR is enabled, the direct map range of the kernel is
reduced to the size of physical memory plus additional padding.
If the BAR address is beyond this limit, PCI peer to peer DMA
mappings fail.
Fix this by not shrinking the size of the direct map when
CONFIG_PCI_P2PDMA=y.
This reduces the total available entropy, but it's better than
the current work around of having to disable KASLR completely.
[ mingo: Clarified the changelog to point out the broad impact ... ]
Signed-off-by: Balbir Singh <balbirs@nvidia.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Kees Cook <kees@kernel.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> # drivers/pci/Kconfig
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/lkml/20250206023201.1481957-1-balbirs@nvidia.com/
Link: https://lore.kernel.org/r/20250206234234.1912585-1-balbirs@nvidia.com
--
arch/x86/mm/kaslr.c | 10 ++++++++--
drivers/pci/Kconfig | 6 ++++++
2 files changed, 14 insertions(+), 2 deletions(-)
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fe37c699ae ]
Depending on the type of panics, it was found that the
__register_nmi_handler() function can be called in NMI context from
nmi_shootdown_cpus() leading to a lockdep splat:
WARNING: inconsistent lock state
inconsistent {INITIAL USE} -> {IN-NMI} usage.
lock(&nmi_desc[0].lock);
<Interrupt>
lock(&nmi_desc[0].lock);
Call Trace:
_raw_spin_lock_irqsave
__register_nmi_handler
nmi_shootdown_cpus
kdump_nmi_shootdown_cpus
native_machine_crash_shutdown
__crash_kexec
In this particular case, the following panic message was printed before:
Kernel panic - not syncing: Fatal hardware error!
This message seemed to be given out from __ghes_panic() running in
NMI context.
The __register_nmi_handler() function which takes the nmi_desc lock
with irq disabled shouldn't be called from NMI context as this can
lead to deadlock.
The nmi_shootdown_cpus() function can only be invoked once. After the
first invocation, all other CPUs should be stuck in the newly added
crash_nmi_callback() and cannot respond to a second NMI.
Fix it by adding a new emergency NMI handler to the nmi_desc
structure and provide a new set_emergency_nmi_handler() helper to set
crash_nmi_callback() in any context. The new emergency handler will
preempt other handlers in the linked list. That will eliminate the need
to take any lock and serve the panic in NMI use case.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Rik van Riel <riel@surriel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20250206191844.131700-1-longman@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e451630226 ]
Problem: Currently when running the "make isoimage" command there is an
error related to wrong parameters passed to the cp command:
"cp: missing destination file operand after 'arch/x86/boot/isoimage/'"
This is caused because FDINITRDS is an empty array.
Solution: Check if FDINITRDS is empty before executing the "cp" command,
similar to how it is done in the case of hdimage.
Signed-off-by: Nir Lichtman <nir@lichtman.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Michal Marek <michal.lkml@markovi.net>
Link: https://lore.kernel.org/r/20250110120500.GA923218@lichtman.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bc4722c359 ]
For sama7g5 and sama7d65 backup mode, we encountered a "ZQ calibrate error"
during recalibrating the impedance in BootStrap.
We found that the impedance value saved in at91_suspend_finish() before
the DDR entered self-refresh mode did not match the resistor values. The
ZDATA field in the DDR3PHY_ZQ0CR0 register uses a modified gray code to
select the different impedance setting.
But these gray code are incorrect, a workaournd from design team fixed the
bug in the calibration logic. The ZDATA contains four independent impedance
elements, but the algorithm combined the four elements into one. The elements
were fixed using properly shifted offsets.
Signed-off-by: Li Bin <bin.li@microchip.com>
[nicolas.ferre@microchip.com: fix indentation and combine 2 patches]
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Tested-by: Ryan Wanner <Ryan.Wanner@microchip.com>
Tested-by: Durai Manickam KR <durai.manickamkr@microchip.com>
Tested-by: Andrei Simion <andrei.simion@microchip.com>
Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
Link: https://lore.kernel.org/r/28b33f9bcd0ca60ceba032969fe054d38f2b9577.1740671156.git.Ryan.Wanner@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 98fdaeb296 ]
Change the default value of spectre v2 in user mode to respect the
CONFIG_MITIGATION_SPECTRE_V2 config option.
Currently, user mode spectre v2 is set to auto
(SPECTRE_V2_USER_CMD_AUTO) by default, even if
CONFIG_MITIGATION_SPECTRE_V2 is disabled.
Set the spectre_v2 value to auto (SPECTRE_V2_USER_CMD_AUTO) if the
Spectre v2 config (CONFIG_MITIGATION_SPECTRE_V2) is enabled, otherwise
set the value to none (SPECTRE_V2_USER_CMD_NONE).
Important to say the command line argument "spectre_v2_user" overwrites
the default value in both cases.
When CONFIG_MITIGATION_SPECTRE_V2 is not set, users have the flexibility
to opt-in for specific mitigations independently. In this scenario,
setting spectre_v2= will not enable spectre_v2_user=, and command line
options spectre_v2_user and spectre_v2 are independent when
CONFIG_MITIGATION_SPECTRE_V2=n.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: David Kaplan <David.Kaplan@amd.com>
Link: https://lore.kernel.org/r/20241031-x86_bugs_last_v2-v2-2-b7ff1dab840e@debian.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2b3db788f2 ]
PLLD is usually used as parent clock for internal video devices, like
DSI for example, while PLLD2 is used as parent for HDMI.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Link: https://lore.kernel.org/r/20250226105615.61087-3-clamor95@gmail.com
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7e67ef889c ]
Similar to the PowerMac3,1, the PowerBook6,7 is missing the #size-cells
property on the i2s node.
Depends-on: commit 045b14ca5c ("of: WARN on deprecated #address-cells/#size-cells handling")
Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
[maddy: added "commit" work in depends-on to avoid checkpatch error]
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/875xmizl6a.fsf@igel.home
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f34621f31e ]
According to the board schematics the enable pin of this regulator is
connected to gpio line #9 of the first instance of the TCA9539
GPIO expander, so adjust it.
Signed-off-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
Link: https://lore.kernel.org/r/20250224-diogo-gpio_exp-v1-1-80fb84ac48c6@tecnico.ulisboa.pt
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
