No need to cast void* to u8*: pointer arithmetics
works same way for both.
Signed-off-by: Aleksey Makarov <aleksey.makarov@caviumnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This fixes a copypaste bug that was discovered by a static analysis
tool:
The patch 4863dea3fa: "net: Adding support for Cavium ThunderX
network controller" from May 26, 2015, leads to the following static
checker warning:
drivers/net/ethernet/cavium/thunder/nicvf_ethtool.c:517
nicvf_set_rxfh()
warn: we tested 'hkey' before and it was 'false'
drivers/net/ethernet/cavium/thunder/nicvf_ethtool.c
506 /* We do not allow change in unsupported parameters */
507 if (hkey ||
^^^^
We return here.
508 (hfunc != ETH_RSS_HASH_NO_CHANGE && hfunc !=
ETH_RSS_HASH_TOP))
509 return -EOPNOTSUPP;
510
511 rss->enable = true;
512 if (indir) {
513 for (idx = 0; idx < rss->rss_size; idx++)
514 rss->ind_tbl[idx] = indir[idx];
515 }
516
517 if (hkey) {
^^^^
So this is dead code.
518 memcpy(rss->key, hkey, RSS_HASH_KEY_SIZE *
sizeof(u64));
519 nicvf_set_rss_key(nic);
520 }
521
522 nicvf_config_rss(nic);
523 return 0;
524 }
regards,
dan carpenter
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Aleksey Makarov <aleksey.makarov@caviumnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This fixes sparse messages like this:
drivers/net/ethernet/cavium/thunder/nicvf_main.c:1141:26: sparse: symbol
'nicvf_get_stats64' was not declared. Should it be static?
Also remove unused declarations
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Aleksey Makarov <aleksey.makarov@caviumnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
They were left from development stage
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Aleksey Makarov <aleksey.makarov@caviumnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This fixes sparse message:
drivers/net/ethernet/cavium/thunder/nicvf_main.c:385:40: sparse: cast to
restricted __le64
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Aleksey Makarov <aleksey.makarov@caviumnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This fixes sparse message:
drivers/net/ethernet/cavium/thunder/nicvf_main.c:153:25: sparse: cast to
restricted __le64
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Aleksey Makarov <aleksey.makarov@caviumnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This fixes sparse messages like this:
drivers/net/ethernet/cavium/thunder/thunder_bgx.c:897:24: sparse:
constant 0x300000000000 is so big it is long
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Aleksey Makarov <aleksey.makarov@caviumnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are duplicate NODE_ID macro definitions. Move all of them to
nic.h for usage in nic and bgx driver and introduce nic_get_node_id()
helper function.
This patch also fixes 64bit mask which should have been ULL by
reworking the node calculation.
Signed-off-by: Robert Richter <rrichter@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The SOCrates has three HPS LEDs that can be turned on/off via gpio.
Use the first one has heartbeat and add the other two as free LEDs.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Add the enable-method property for the cpu node on socfpga.dtsi and
socfpga_arria10.dtsi. This is for CPU_METHOD_OF_DECLARE to use to enable
the secondary core.
Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
gpio-restart uses a priority of 128 and currently most soc-level restart
mechanisms use the same - with some exceptions even using 192.
But while the soc-level restarts are provided by the soc itself,
gpio-restarts will most of the time be board-specfic and be used
when some special board condition makes the soc-level restart
only a second choice.
The problem at hand manifested itself on the rk3288-veyron devices.
While the soc-level restart can sucessfully restart all other rockchip
boards I have, the veyron devices use an external restart mechanism that
seems to not only reset the soc but also some external needed components.
With both restart handlers having priority 128 in my tests the soc-specific
variant took precedent in all cases. While it could restart the soc
sucessfully in all cases, firmware then got an issue when talking to an
external component, resulting in the device being put into recovery mode.
So, give the board-specific restart handler a slight push and move it
to priority 129 to make it more important than the generic soc-specific
restart-handler.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Smatch static checker correctly detected an impossible condition because
chip_id was declared as u8, instead of int:
drivers/power/bq25890_charger.c:843 bq25890_probe()
warn: impossible condition '(bq->chip_id < 0) => (0-255 < 0)'
Also, while at it, fix the return value too.
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Smack onlycap allows limiting of CAP_MAC_ADMIN and CAP_MAC_OVERRIDE to
processes running with the configured label. But having single privileged
label is not enough in some real use cases. On a complex system like Tizen,
there maybe few programs that need to configure Smack policy in run-time
and running them all with a single label is not always practical.
This patch extends onlycap feature for multiple labels. They are configured
in the same smackfs "onlycap" interface, separated by spaces.
Signed-off-by: Rafal Krypa <r.krypa@samsung.com>
Use proper RCU functions and read locking in smackfs seq_operations.
Smack gets away with not using proper RCU functions in smackfs, because
it never removes entries from these lists. But now one list will be
needed (with interface in smackfs) that will have both elements added and
removed to it.
This change will also help any future changes implementing removal of
unneeded entries from other Smack lists.
The patch also fixes handling of pos argument in smk_seq_start and
smk_seq_next. This fixes a bug in case when smackfs is read with a small
buffer:
Kernel panic - not syncing: Kernel mode fault at addr 0xfa0000011b
CPU: 0 PID: 1292 Comm: dd Not tainted 4.1.0-rc1-00012-g98179b8 #13
Stack:
00000003 0000000d 7ff39e48 7f69fd00
7ff39ce0 601ae4b0 7ff39d50 600e587b
00000010 6039f690 7f69fd40 00612003
Call Trace:
[<601ae4b0>] load2_seq_show+0x19/0x1d
[<600e587b>] seq_read+0x168/0x331
[<600c5943>] __vfs_read+0x21/0x101
[<601a595e>] ? security_file_permission+0xf8/0x105
[<600c5ec6>] ? rw_verify_area+0x86/0xe2
[<600c5fc3>] vfs_read+0xa1/0x14c
[<600c68e2>] SyS_read+0x57/0xa0
[<6001da60>] handle_syscall+0x60/0x80
[<6003087d>] userspace+0x442/0x548
[<6001aa77>] ? interrupt_end+0x0/0x80
[<6001daae>] ? copy_chunk_to_user+0x0/0x2b
[<6002cb6b>] ? save_registers+0x1f/0x39
[<60032ef7>] ? arch_prctl+0xf5/0x170
[<6001a92d>] fork_handler+0x85/0x87
Signed-off-by: Rafal Krypa <r.krypa@samsung.com>
The naming convention is to always have the flags prefixed with
IEEE80211_HW_ so they're 'namespaced', make this flag follow it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There are no drivers setting IEEE80211_HW_2GHZ_SHORT_SLOT_INCAPABLE
or IEEE80211_HW_2GHZ_SHORT_PREAMBLE_INCAPABLE, so any code using the
two flags is dead; it's also exceedingly unlikely that any new driver
could ever need to set these flags.
The wcn36xx code is almost certainly broken, but this preserves the
previous behaviour.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This patch moves kernel.h from tools/perf/util/include/linux/kernel.h
to tools/include/linux/kernel.h to enable other libraries use macros in
it, like libbpf which will be introduced by further patches.
MANIFEST is also updated for 'make perf-*-src-pkg'.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1433144296-74992-2-git-send-email-wangnan0@huawei.com
[ Fixed up the ifdef guard to match other entries in tools/include/linux ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When unifying the user_dsos and kernel_dsos a bug was introduced by
inverting the check for dso->kernel, fix it.
Fixes: 3d39ac5386 ("perf machine: No need to have two DSOs lists")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/n/tip-xnrnq0kams3s2z9ek1wjb506@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add suspend/resume support to the Broadcom iProc I2C driver
Signed-off-by: Ray Jui <rjui@broadcom.com>
Reviewed-by: Scott Branden <sbranden@broadcom.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=/1cE
-----END PGP SIGNATURE-----
Merge tag 'please-pull-rusty' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux
Pull ia64 fix from Tony Luck:
"Fix some build warnings for ia64 - cpu_callin_map doesn't need to be
volatile"
* tag 'please-pull-rusty' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux:
ia64: make cpu_callin_map non-volatile.
Acer Aspire 9420 with ALC883 (1025:0107) needs the fixup for EAPD to
make the sound working like other Aspire models.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=94111
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Commit 1fc2fe204c ("i2c: designware: Add runtime PM hooks") adds
runtime pm support using the same ops for system pm and runtime pm.
When suspend to ram, the i2c host may have been runtime suspended, thus
i2c_dw_disable() hangs.
Previously, I fixed this issue by separating ops for system pm and
runtime pm, then in the system suspend/resume path, runtime pm apis are
used to ensure the device is at correct state.
But as Mika Westerberg pointed out: it sounds a bit silly to resume the
device just because you want to call i2c_dw_disable() for it before
suspending again. He then suggested an elegant solution which keeps the
device runtime suspended during system suspend with the help of
'dev->power.direct_complete'. This patch adopted this solution, and in
fact Mika provided the main code.
Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Focaltech touchpads report finger width in packet[5] of absolute packet.
Range for width in raw format is 0x10 - 0x70. Second half-byte is always 0.
0xff is reported, when a large contact area is detected.
This can be handled in userspace.
Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The platform_sysrq_reset_seq code was intended as a way for an embedded
platform to provide its own sysrq sequence at compile time. After over two
years, nobody has started using it in an upstream kernel, and the platforms
that were interested in it have moved on to devicetree, which can be used
to configure the sequence without requiring kernel changes. The method is
also incompatible with the way that most architectures build support for
multiple platforms into a single kernel.
Now the code is producing warnings when built with gcc-5.1:
drivers/tty/sysrq.c: In function 'sysrq_init':
drivers/tty/sysrq.c:959:33: warning: array subscript is above array bounds [-Warray-bounds]
key = platform_sysrq_reset_seq[i];
We could fix this, but it seems unlikely that it will ever be used, so
let's just remove the code instead. We still have the option to pass the
sequence either in DT, using the kernel command line, or using the
/sys/module/sysrq/parameters/reset_seq file.
Fixes: 154b7a489a ("Input: sysrq - allow specifying alternate reset sequence")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Make the check to skip the rate check more lax, so that it applies
to all hw_version 4 models.
This fixes the touchpad not being detected properly on Asus PU551LA
laptops.
Cc: stable@vger.kernel.org
Reported-and-tested-by: David Zafra Gómez <dezeta@klo.es>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Clean up: Merge bc_send() into bc_svc_process().
Note: even thought this touches svc.c, it is a client-side change.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
We used to read file_handle twice. Once to get the amount of extra
bytes, and once to fetch the entire structure.
This may be problematic since we do size verifications only after the
first read, so if the number of extra bytes changes in userspace between
the first and second calls, we'll have an incoherent view of
file_handle.
Instead, read the constant size once, and copy that over to the final
structure without having to re-read it again.
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If the specified maximum length of the string is a multiple of unsigned
long, we would load one long behind the specified maximum. If that
happens to be in a next page, we can hit a page fault although we were
not expected to.
Fix the off-by-one bug in the test whether we are at the end of the
specified range.
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The change fixes the following compilation problem:
sound/soc/soc-dapm.c: In function 'dapm_kcontrol_data_alloc':
sound/soc/soc-dapm.c:388:4: error: implicit declaration of function
'snd_soc_dapm_new_control' [-Werror=implicit-function-declaration]
data->widget = snd_soc_dapm_new_control(widget->dapm,
^
sound/soc/soc-dapm.c:387:17: warning: assignment makes pointer
from integer without a cast [enabled by default]
data->widget = snd_soc_dapm_new_control(widget->dapm,
^
sound/soc/soc-dapm.c: At top level:
sound/soc/soc-dapm.c:3269:1: error: conflicting types for
'snd_soc_dapm_new_control'
snd_soc_dapm_new_control(struct snd_soc_dapm_context *dapm,
^
In addition to the fix add static qualifier to
snd_soc_dapm_new_control() function to silence checkpatch.
Fixes: 02aa78abec ("ASoC: DAPM: Add APIs to create individual DAPM controls.")
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
replace of_property_read_u32 with device_property_read_u32
Signed-off-by: Fang, Yang A <yang.a.fang@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
cpumask_test_cpu() doesn't take volatile, unlike the obsoleted
cpu_isset. The only place ia64 really cares is the spin waiting for a
bit; udelay() is probably a barrier but insert barrier() to be sure.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Tony Luck <tony.luck@intel.com>
FALLOC_FL_INSERT_RANGE flag for ->fallocate was introduced in commit
dd46c78778 ("fs: Add support FALLOC_FL_INSERT_RANGE for fallocate").
The effect of FALLOC_FL_INSERT_RANGE command is the opposite of
FALLOC_FL_COLLAPSE_RANGE, if this command was performed, all data from
offset to EOF in our file will be shifted to right as given length, and
then range [offset, offset + length] becomes a hole.
This command is useful for our user who wants to add some data in the
middle of the file, for example: video/music editor will insert a keyframe
in specified position of media file, with this command we can easily create
a hole for inserting without removing original data.
This patch introduces f2fs_insert_range() to support FALLOC_FL_INSERT_RANGE.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Yuan Zhong <yuan.mark.zhong@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch clean up codes through:
1.rename f2fs_replace_block to __f2fs_replace_block().
2.introduce new f2fs_replace_block() to include __f2fs_replace_block()
and some common related codes around __f2fs_replace_block().
Then, newly introduced function f2fs_replace_block can be used by
following patch.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Two cleanups of the asm function cpu_resume():
- The global variable sleep_idmap_phys always points to idmap_pg_dir,
so we can just use that value directly in the CPU resume path.
- Unclutter the load of sleep_save_sp::save_ptr_stash_phys.
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Tested-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Commit ea8c2e1124 ("arm64: Extend the idmap to the whole kernel
image") changed the early page table code so that the entire kernel
Image is covered by the identity map. This allows functions that
need to enable or disable the MMU to reside anywhere in the kernel
Image.
However, this change has the unfortunate side effect that the Image
cannot cross a physical 512 MB alignment boundary anymore, since the
early page table code cannot deal with the Image crossing a /virtual/
512 MB alignment boundary.
So instead, reduce the ID map to a single page, that is populated by
the contents of the .idmap.text section. Only three functions reside
there at the moment: __enable_mmu(), cpu_resume_mmu() and cpu_reset().
If new code is introduced that needs to manipulate the MMU state, it
should be added to this section as well.
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
This patch makes the quota subsystem only report once that a
particular user/group has exceeded their allotted quota.
Previously, it was possible for a program to continuously try
exceeding quota (despite receiving EDQUOT) and in turn trigger
gfs2 to issue a kernel log message about quota exceed. In theory,
this could get out of hand and flood the log and the filesystem
hosting the log files.
Signed-off-by: Abhi Das <adas@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
For smaller block sizes (512B, 1K, 2K), some quotas straddle block
boundaries such that the usage value is on one block and the rest
of the quota is on the previous block. In such cases, the value
does not get updated correctly. This patch fixes that by addressing
the boundary conditions correctly.
This patch also adds a (s64) cast that was missing in a call to
gfs2_quota_change() in inode.c
Signed-off-by: Abhi Das <adas@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Use recovery framework and implement bus recovery using "Bus Monitor" register.
Tests show that shortening SDA to GND results in "completion" timeout with
"BUSY" bit still set, so initiate recovery in this case.
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Currently, the FDT blob needs to be in the same 512 MB region as
the kernel, so that it can be mapped into the kernel virtual memory
space very early on using a minimal set of statically allocated
translation tables.
Now that we have early fixmap support, we can relax this restriction,
by moving the permanent FDT mapping to the fixmap region instead.
This way, the FDT blob may be anywhere in memory.
This also moves the vetting of the FDT to mmu.c, since the early
init code in head.S does not handle mapping of the FDT anymore.
At the same time, fix up some comments in head.S that have gone stale.
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
This splits off the reservation of the memory occupied by the FDT
binary itself from the processing of the memory reservations it
contains. This is necessary because the physical address of the FDT,
which is needed to perform the reservation, may not be known to the
FDT driver core, i.e., it may be mapped outside the linear direct
mapping, in which case __pa() returns a bogus value.
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
sizeof(struct i2c_client) is 1088 bytes on a CONFIG_X86_64=y build and
produces following warning when CONFIG_FRAME_WARN is set to 1024:
drivers/i2c/i2c-core.c: In function ‘acpi_i2c_space_handler’:
drivers/i2c/i2c-core.c:367:1: warning: the frame size of 1152 bytes is
larger than 1024 bytes [-Wframe-larger-than=]
This is not critical given that kernel stack is 16 kB on x86_64 but lets
reduce the stack usage by allocating the struct i2c_client from the heap.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Merge hickup on my part, due to a clash between the writeback
changes and the EOPNOTSUPP removal in _submit_bh().
Signed-off-by: Jens Axboe <axboe@fb.com>
