Add a helper to allocate and add a clk_lookup structure. This can not
only be used in several places in clkdev.c to simplify the code, but
more importantly, can be used by callers of the clkdev code to simplify
their clkdev creation and registration.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
The connection id is only passed to clk_get() which is already const.
Const-ify this argument too.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
clk_add_alias() is provided by clkdev, and is not part of the clk API.
Howver, it is prototyped in two locations: linux/clkdev.h and
linux/clk.h. This is a mess. Get rid of the redundant and unnecessary
version in linux/clk.h.
Acked-by: Tony Lindgren <tony@atomide.com>
Tested-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
rt5650 codec supports 4 buttons detections so enabled it
Signed-off-by: Fang, Yang A <yang.a.fang@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
We want to be able to call clkdev_add_table() from non-init code, so we
need to drop the __init marker from it.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
The idea is that rate = clk_round_rate(clk, r) is equivalent to:
clk_set_rate(clk, r);
rate = clk_get_rate(clk);
except that clk_round_rate() does not change the hardware in any way.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
clk_add_alias() calls clk_get() followed by clk_put() but in between
those two calls it saves away the struct clk pointer to a clk_lookup
structure. This leaves the 'clk' member of the clk_lookup pointing at
freed memory on configurations where CONFIG_COMMON_CLK=y. This is a
problem because clk_get_sys() will eventually try to dereference the
freed pointer by calling __clk_get_hw() on it. Fix this by saving away
the struct clk_hw pointer instead of the struct clk pointer so that when
we try to create a per-user struct clk in clk_get_sys() we don't
dereference a junk pointer.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
of_match_device() checks if dev->of_node is NULL, so we don't need to do
it again in the probe function.
Signed-off-by: Kevin Cernekee <cernekee@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
f9fd54f22e ("mmc: sh_mmcif: Use msecs_to_jiffies() for host->timeout")
changed the timeout value from 1000 jiffies to 1s. In the case where
HZ is 1000 the values are the same. However, for smaller HZ values the
timeout is now smaller, 1s instead of 10s in the case of HZ=100.
Since the timeout occurs in spite of a normal data transfer a timeout of
10s seems more appropriate. This restores the previous timeout in the
case where HZ=100 and results in an increase over the previous timeout
for larger values of HZ.
Fixes: f9fd54f22e ("mmc: sh_mmcif: Use msecs_to_jiffies() for host->timeout")
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
[horms: rewrote changelog to refer to HZ]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Add some text to the macro magic for future reference and against
failing human memory.
Requested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Apparently, people do build microcode into the kernel image, i.e.
CONFIG_FIRMWARE_IN_KERNEL=y.
Make that work in the early loader which is where microcode should be
preferably loaded anyway.
Note that you need to specify the microcode filename with the path
relative to the toplevel firmware directory (the same like the late
loading method) in CONFIG_EXTRA_FIRMWARE=y so that early loader can
find it.
I.e., something like this (Intel variant):
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE="intel-ucode/06-3a-09"
CONFIG_EXTRA_FIRMWARE_DIR="/lib/firmware/"
While at it, add me to the loader copyright boilerplate.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Daniel J Blueman <daniel@numascale.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
@rev wasn't used in get_matching_sig(), drop it.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
It is a one-liner for checking microcode header revisions. On top of
that, it can be used wrong as it was the case in _save_mc(). Get rid of
it.
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The following commit:
f893959b08 ("x86/fpu: Don't abuse drop_init_fpu() in flush_thread()")
removed drop_init_fpu() usage from flush_thread(). This seems to break
things for me - the Go 1.4 test suite fails all over the place with
floating point comparision errors (offending commit found through
bisection).
The functional change was that flush_thread() after this commit
only calls restore_init_xstate() when both use_eager_fpu() and
!used_math() are true. drop_init_fpu() (now fpu_reset_state()) calls
restore_init_xstate() regardless of whether current used_math() - apply
the same logic here.
Switch used_math() -> tsk_used_math(tsk) to consistently use the grabbed
tsk instead of current, like in the rest of flush_thread().
Tested-by: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Bobby Powers <bobbypowers@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Pekka Riikonen <priikone@iki.fi>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Suresh Siddha <sbsiddha@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: f893959b ("x86/fpu: Don't abuse drop_init_fpu() in flush_thread()")
Link: http://lkml.kernel.org/r/1430147441-9820-1-git-send-email-bobbypowers@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The eDP port A register on PCH split platforms has a slightly different
register layout from the other ports, with bit 6 being either alternate
scrambler reset or reserved, depending on the generation. Our
misinterpretation of the bit as audio has lead to warning.
Fix this by not enabling audio on port A, since none of our platforms
support audio on port A anyway.
v2: DDI doesn't have audio on port A either (Sivakumar Thulasimani)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89958
Reported-and-tested-by: Chris Bainbridge <chris.bainbridge@gmail.com>
Cc: stable@vger.kernel.org
Reviewed-by: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Decision to use a 4-bit mask or 8-bit mask in default_get_apic_id()
is controlled by setting capability bit X86_FEATURE_EXTD_APICID.
Currently, we detect extended APIC ID support by accessing Link
Transaction Control register D18F0x68 in PCI config space.
But, not even that is needed as we can safely postulate that future
AMD processors will support 8-bit APIC IDs and we can simply set that
feature bit on them, without the PCI access.
Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jacob Shin <jacob.w.shin@gmail.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dave.hansen@linux.intel.com
Cc: hecmargi@upv.es
Cc: mgorman@suse.de
Link: http://lkml.kernel.org/r/1430148351-9013-1-git-send-email-Aravind.Gopalakrishnan@amd.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
GART registers are not present in newer AMD processors (Fam15h, Model
10h and later). So, avoid accessing those in PCI config space by
returning early in early_gart_iommu_check() and gart_iommu_hole_init()
if GART is not available.
Current code doesn't break on existing processors but there are some
side effects:
We get bogus AGP aperture messages which are simply noise on
GART-less processors:
AGP: Node 0: aperture [bus addr 0x00000000-0x01ffffff] (32MB)
AGP: Your BIOS doesn't leave aperture memory hole
AGP: Please enable the IOMMU option in the BIOS setup
AGP: This costs you 64MB of RAM
AGP: Mapping aperture over RAM [mem 0xd4000000-0xd7ffffff]
We can avoid calling allocate_aperture() and would not have to
wastefully reserve 64MB of RAM with memblock_reserve(). Also, we can
avoid having to loop through all PCI buses and devices twice, searching
for a non-existent AGP bridge if we bail out early.
Refactor the family check used in amd_nb.c into an inline function so we
can use it here as well as in amd_nb.c
Fix some typos while at it.
Tested the patch on Fam10h and Fam15h Model 00h-fh and this code runs
fine. On Fam15h Model 60h-6fh and on Fam16h, we bail early as they don't
have GART.
Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Joerg Rodel <joro@8bytes.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1428443197-3834-1-git-send-email-Aravind.Gopalakrishnan@amd.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
GCC 5 added a compiler option, -mskip-rax-setup, for x86-64. It skips
setting up the RAX register when SSE is disabled and there are no
variable arguments passed in vector registers. (According to the x86_64
ABI, %al is used as a hidden register containing the number of vector
registers used).
Since the kernel doesn't pass vector registers to functions with
variable arguments, this option can be used to optimize the x86-64
kernel.
This GCC feature was suggested by Rasmus Villemoes <linux@rasmusvillemoes.dk>.
This is the corresponding kernel change using it.
For kernel v3.17:
text data bss dec filename
11455921 2204048 5853184 19513153 vmlinux #with -mskip-rax-setup
11480079 2204048 5853184 19537311 vmlinux
For Kernel v4.0+ - custom config:
text data bss dec filename
10231778 3479800 16617472 30329050 vmlinux-gcc5+-mskip-rax-setup
10268797 3547448 16621568 30437813 vmlinux
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Remove the per-CPU delays during SMP initialization, which seems
to be possible on newer architectures with an x2APIC.
Xen does this since 2011. In fact, this commit is basically a
combination of the following Xen commits. The first removes the
delays, the second fixes an issue with the removal:
commit 68fce206f6dba9981e8322269db49692c95ce250
Author: Tim Deegan <Tim.Deegan@citrix.com>
Date: Tue Jul 19 14:13:01 2011 +0100
x86: Remove timeouts from INIT-SIPI-SIPI sequence when using x2apic.
Some of the timeouts are pointless since they're waiting for the ICR
to ack the IPI delivery and that doesn't happen on x2apic.
The others should be benign (and are suggested in the SDM) but
removing them makes AP bringup much more reliable on some test boxes.
Signed-off-by: Tim Deegan <Tim.Deegan@citrix.com>
commit f12ee533150761df5a7099c83f2a5fa6c07d1187
Author: Gang Wei <gang.wei@intel.com>
Date: Thu Dec 29 10:07:54 2011 +0000
X86: Add a delay between INIT & SIPIs for tboot AP bring-up in X2APIC case
Without this delay, Xen could not bring APs up while working with
TXT/tboot, because tboot needs some time in APs to handle INIT before
becoming ready for receiving SIPIs (this delay was removed as part of
c/s 23724 by Tim Deegan).
Signed-off-by: Gang Wei <gang.wei@intel.com>
Acked-by: Keir Fraser <keir@xen.org>
Acked-by: Tim Deegan <tim@xen.org>
Committed-by: Tim Deegan <tim@xen.org>
Signed-off-by: Jan H. Schönherr <jschoenh@amazon.de>
Cc: Anthony Liguori <aliguori@amazon.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Gang Wei <gang.wei@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tim Deegan <tim@xen.org>
Link: http://lkml.kernel.org/r/1430732554-7294-1-git-send-email-jschoenh@amazon.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
EFI variable name - Ross Lagerwall
* Stop erroneously dropping upper 32-bits of boot command line pointer
in EFI boot stub and stash them in ext_cmd_line_ptr - Roy Franz
* Fix double-free bug in error handling code path of EFI runtime map
code - Dan Carpenter
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=f7a2
-----END PGP SIGNATURE-----
Merge tag 'efi-urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/mfleming/efi into x86/urgent
Pull EFI fixes from Matt Fleming:
* Avoid garbage names in efivarfs due to buggy firmware by zeroing
EFI variable name. (Ross Lagerwall)
* Stop erroneously dropping upper 32 bits of boot command line pointer
in EFI boot stub and stash them in ext_cmd_line_ptr. (Roy Franz)
* Fix double-free bug in error handling code path of EFI runtime map
code. (Dan Carpenter)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
A string written by the user may not be zero terminated.
sscanf may read memory beyond the buffer if no zero byte
is found.
For testing build with CONFIG_USB_CHIPIDEA=y, CONFIG_USB_CHIPIDEA_DEBUG=y.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Peter Chen <peter.chen@freescale.com>
In our department we are using some older Janz ICAN3-modules in our dekstop
pcs. There we have slightly different carrier boards than the janz-cmodio
supported in the kernel sources, called CAN-PCI2 with two submodules. But the
pci configuration regions are identical. So extending the supported pci devices
to the corresponding device ids is sufficient to get the drivers working.
* The old ICAN3-modules with firmware 1.28 need more then 250ms for the restart
after reset. I've increased the timeout to 500ms.
* The janz_ican3 module uses the raw can services of the Janz-firmware, this
means firmware must be ICANOS/2. Our ICAN3-modules are equipped with
CAL/CANopen-firmware, so I must use the appropriate commands for the layer
management services.
Te driver detects the firmware after module reset and selects the commands
matching the firmware. This affects the bus on/off-command
(ican3_set_bus_state) and the configuration of the bittiming
(ican3_set_bittiming). For better diagnostics the detected firmware string is
presented as sysfs attribute (fwinfo).
Signed-off-by: Andreas Gröger <andreas24groeger@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This patch adds documentation for the existing sysfs entries for the janz PCI
module.
Signed-off-by: Andreas Gröger <andreas24groeger@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The current definition of struct can_frame has a 16-byte size, with 8-byte
alignment, but the 3 bytes of padding are not explicit like the similar 2 bytes
of padding of struct canfd_frame. Make it explicit so it is easier to read.
Signed-off-by: Shawn Landden <shawn@churchofgit.com>
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The platform_device_id is not modified by the driver and core uses it as
const.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Staticize symbols not exported and not used outside of file.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Replace duplicated const keyword with proper array of const pointers to
const strings.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
The array of parent names can be made as array of const pointers to
const strings.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
The array of parent names can be made as array of const pointers to
const strings.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Add missing static to local (file-scope only) symbols.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Add missing static to local (file-scope only) symbols.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
This adds the binding documentation for the apmixedsys, perisys and
infracfg controllers found on Mediatek SoCs.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
This patch adds basic clocks for MT8173, including TOPCKGEN, PLLs,
INFRA and PERI clocks.
Signed-off-by: James Liao <jamesjj.liao@mediatek.com>
Signed-off-by: Henry Chen <henryc.chen@mediatek.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
This patch adds basic clocks for MT8135, including TOPCKGEN, PLLs,
INFRA and PERI clocks.
Signed-off-by: James Liao <jamesjj.liao@mediatek.com>
Signed-off-by: Henry Chen <henryc.chen@mediatek.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
The pericfg and infracfg units also provide reset lines to several
other SoC internal units. This adds a function which can be called
from the pericfg and infracfg initialization functions which will
register the reset controller using reset_controller_register. The
reset controller will provide support for resetting the units
connected to the pericfg and infracfg controller. The units resetted
by this controller can use the standard reset device tree binding
to gain access to the reset lines.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
This patch adds common clock support for Mediatek SoCs, including plls,
muxes and clock gates.
Signed-off-by: James Liao <jamesjj.liao@mediatek.com>
Signed-off-by: Henry Chen <henryc.chen@mediatek.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
[sboyd@codeaurora.org: Squelch checkpatch warning in clk-mtk.h]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
The clk functions and structs declare the parent_name arrays as
'const char **parent_names' which means the parent name strings
are const, but the array itself is not. Use
'const char * const * parent_names' instead which also makes
the array const. This allows us to put the parent_name arrays into
the __initconst section.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
[sboyd@codeaurora.org: Squelch 80-character checkpatch warnings]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Recent PCI changes stopped exporting PCI constants if !CONFIG_PCI,
which made the UV build fail:
arch/x86/kernel/apic/x2apic_uv_x.c:843:16: error: ‘PCI_VGA_STATE_CHANGE_BRIDGE’ undeclared (first use in this function)
arch/x86/kernel/apic/x2apic_uv_x.c:1023:2: error: implicit declaration of function ‘pci_register_set_vga_state’ [-Werror=implicit-function-declaration]
As it's unlikely that an UV bootup will get far without PCI
enumeration, make the platform Kconfig switch (CONFIG_X86_UV)
depend on CONFIG_PCI=y.
Cc: Robin Holt <holt@sgi.com>
Cc: Dimitri Sivanich <sivanich@sgi.com>
Cc: Russ Anderson <rja@sgi.com>
Cc: Mike Travis <travis@sgi.com>
Cc: Jack Steiner <steiner@sgi.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
User visible:
- Improve --filter support for 'perf probe', allowing using its arguments
on other commands, as --add, --del, etc (Masami Hiramatsu)
- Show warning when running 'perf kmem stat' on a unsuitable perf.data file,
i.e. one with events that are not the ones required for the stat variant
used (Namhyung Kim).
Infrastructure:
- Auxtrace support patches, paving the way to support Intel PT and BTS (Adrian Hunter)
- hists browser (top, report) refactorings (Namhyung Kim)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=oEm1
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo-3' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
User visible changes:
- Improve --filter support for 'perf probe', allowing using its arguments
on other commands, as --add, --del, etc (Masami Hiramatsu)
- Show warning when running 'perf kmem stat' on a unsuitable perf.data file,
i.e. one with events that are not the ones required for the stat variant
used (Namhyung Kim).
Infrastructure changes:
- Auxtrace support patches, paving the way to support Intel PT and BTS (Adrian Hunter)
- hists browser (top, report) refactorings (Namhyung Kim)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
the SSIF driver has been in the main kernel for a while.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iEYEABECAAYFAlVJYpsACgkQIXnXXONXERcc1wCfZS0viLVcju2FdzgpXrI+nEcp
gXcAn0dznQiTK0qO44qUCtjwtmKvfJaT
=1yl/
-----END PGP SIGNATURE-----
Merge tag 'for-linus-4.1-1' of git://git.code.sf.net/p/openipmi/linux-ipmi
Pull IPMI fixes from Corey Minyard:
"Lots of minor IPMI fixes, especially ones that have have come up since
the SSIF driver has been in the main kernel for a while"
* tag 'for-linus-4.1-1' of git://git.code.sf.net/p/openipmi/linux-ipmi:
ipmi: Fix multi-part message handling
ipmi: Add alert handling to SSIF
ipmi: Fix a problem that messages are not issued in run_to_completion mode
ipmi: Report an error if ACPI _IFT doesn't exist
ipmi: Remove unused including <linux/version.h>
ipmi: Don't report err in the SI driver for SSIF devices
ipmi: Remove incorrect use of seq_has_overflowed
ipmi:ssif: Ignore spaces when comparing I2C adapter names
ipmi_ssif: Fix the logic on user-supplied addresses
Merge misc fixes from Andrew Morton:
"16 patches
This includes a new rtc driver for the Abracon AB x80x and isn't very
appropriate for -rc2. It was still being fiddled with a bit during
the merge window and I fell asleep during -rc1"
[ So I took the new driver, it seems small and won't regress anything.
I'm a softy. - Linus ]
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
rtc: armada38x: fix concurrency access in armada38x_rtc_set_time
ocfs2: dlm: fix race between purge and get lock resource
nilfs2: fix sanity check of btree level in nilfs_btree_root_broken()
util_macros.h: have array pointer point to array of constants
configfs: init configfs module earlier at boot time
mm/hwpoison-inject: check PageLRU of hpage
mm/hwpoison-inject: fix refcounting in no-injection case
mm: soft-offline: fix num_poisoned_pages counting on concurrent events
rtc: add rtc-abx80x, a driver for the Abracon AB x80x i2c rtc
Documentation: bindings: add abracon,abx80x
kasan: show gcc version requirements in Kconfig and Documentation
mm/memory-failure: call shake_page() when error hits thp tail page
lib: delete lib/find_last_bit.c
MAINTAINERS: add co-maintainer for LED subsystem
zram: add Designated Reviewer for zram in MAINTAINERS
revert "zram: move compact_store() to sysfs functions area"
thinkpad_acpi: Fix warning for static not at beginning
ideapad_laptop: Add Lenovo G40-30 to devices without radio switch
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVSTCfAAoJEKbMaAwKp364zysH/1J2y8Yg/gWIm6GKwtvA3riL
0Q1QJFnMWSQ3f/ckXP33ZvCMEKC9nYZwxQfOKCC4VN73VvVzRgXsSWc7RNMN3Ukx
qGs6agoNwBF4HlUTr/jiJmYz9yvumVwXo0LMZZWJhusOxOaLk5FraCLSgDySGZ5Q
pl0qecFRk21KymRxIpEIOP3CsZRYY9KOi9A8vsuk1SphhKmG+nnLxwSLdWn+7GRT
Iw/MgDINOqcQORrMmI3wQ0+w8beB2hcY3CiNqSmRsR6Bl2wXVuNjO/EKTgME61F/
u209y6W/FVWRvg62TIWOGSwKmKZUTUId7+LxjqWL2uUJdfzU6E864mXY5C/ZHr0=
=PZmH
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v4.1-2' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86
Pull x86 platform driver fixes from Darren Hart:
"This includes a trivial warning and adding a Lenovo laptop to an
existing quirk.
I've held off on things like the latter in the past, but I didn't feel
it was risky enough to push out to 4.2.
- thinkpad_acpi:
Fix warning for static not at beginning
- ideapad_laptop:
Add Lenovo G40-30 to devices without radio switch"
* tag 'platform-drivers-x86-v4.1-2' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86:
thinkpad_acpi: Fix warning for static not at beginning
ideapad_laptop: Add Lenovo G40-30 to devices without radio switch
Lots of little fixes for multi-part messages:
The values was not being re-initialized, if something went wrong
handling a multi-part message and it got left in a bad state, it
might be an issue.
The commands were not correct when issuing multi-part reads, the
code was not passing in the proper value for commands. Also clean
up some minor formatting issues.
Get the block number from the right location, limit the maximum send
message size to 63 bytes and explain why, and fix some minor sylistic
issues.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
The SSIF interface can optionally have an SMBus alert come in when
data is ready. Unfortunately, the IPMI spec gives wiggle room to
the implementer to allow them to always have the alert enabled,
even if the driver doesn't enable it. So implement alerts.
If you don't in this situation, the SMBus alert handling will
constantly complain.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
start_next_msg() issues a message placed in smi_info->waiting_msg
if it is non-NULL. However, sender() sets a message to
smi_info->curr_msg and NULL to smi_info->waiting_msg in the context
of run_to_completion mode. As the result, it leads an infinite
loop by waiting the completion of unissued message when leaving
dying message after kernel panic.
sender() should set the message to smi_info->waiting_msg not
curr_msg.
Signed-off-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
When probing an ACPI table, report a specific error, instead of just
returning an error, if _IFT doesn't exist.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Remove including <linux/version.h> that don't need it.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
While setting the time, the RTC TIME register should not be accessed.
However due to hardware constraints, setting the RTC time involves
sleeping during 100ms. This sleep was done outside the critical section
protected by the spinlock, so it was possible to read the RTC TIME
register and get an incorrect value. This patch introduces a mutex for
protecting the RTC TIME access, unlike the spinlock it is allowed to
sleep in a critical section protected by a mutex.
The RTC STATUS register can still be used from the interrupt handler but
it has no effect on setting the time.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: <stable@vger.kernel.org> [4.0]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
