Pull core locking changes from Ingo Molnar:
"Main changes:
- jump label asm preparatory work for PowerPC (Anton Blanchard)
- rwsem optimizations and cleanups (Davidlohr Bueso)
- mutex optimizations and cleanups (Jason Low)
- futex fix (Oleg Nesterov)
- remove broken atomicity checks from {READ,WRITE}_ONCE() (Peter
Zijlstra)"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
powerpc, jump_label: Include linux/jump_label.h to get HAVE_JUMP_LABEL define
jump_label: Allow jump labels to be used in assembly
jump_label: Allow asm/jump_label.h to be included in assembly
locking/mutex: Further simplify mutex_spin_on_owner()
locking: Remove atomicy checks from {READ,WRITE}_ONCE
locking/rtmutex: Rename argument in the rt_mutex_adjust_prio_chain() documentation as well
locking/rwsem: Fix lock optimistic spinning when owner is not running
locking: Remove ACCESS_ONCE() usage
locking/rwsem: Check for active lock before bailing on spinning
locking/rwsem: Avoid deceiving lock spinners
locking/rwsem: Set lock ownership ASAP
locking/rwsem: Document barrier need when waking tasks
locking/futex: Check PF_KTHREAD rather than !p->mm to filter out kthreads
locking/mutex: Refactor mutex_spin_on_owner()
locking/mutex: In mutex_spin_on_owner(), return true when owner changes
Pull EFI update from Ingo Molnar:
"This tree includes various fixes, cleanups, a new efi=debug boot
option and EFI boot stub memory allocation optimizations"
* 'core-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi/libstub: Retrieve FDT size when loaded from UEFI config table
efi: Clean up the efi_call_phys_[prolog|epilog]() save/restore interaction
efi: Disable interrupts around EFI calls, not in the epilog/prolog calls
x86/efi: Add a "debug" option to the efi= cmdline
firmware: dmi_scan: Use direct access to static vars
firmware: dmi_scan: Use full dmi version for SMBIOS3
Thomas Graf says:
====================
Bring sizeof(net_device) down to < 2K bytes
The size of struct net_device crossed the 2K boundary a while ago which
is a waste in combination with many net namespaces. This series brings
the size of struct net_device down to well below 2K in total size with
a typical configuration. Some reserves a several holes leave room for
further expansion.
Before:
/* size: 2176, cachelines: 34, members: 121 */
After:
/* size: 1984, cachelines: 31, members: 120 */
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Some trivial reorders while preserving the RX/TX cache lines
split to fill a couple of holes.
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
e1000e is the only driver requiring pm_qos_req, instead of causing
every device to waste up to 240 bytes. Allocate it for the specific
driver.
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Revert recent change which broke IO accounting.
Fix bug with RAID0 arrays with non-power-of-2 chunk size.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=l6UZ
-----END PGP SIGNATURE-----
Merge tag 'md/4.0-rc7-fix' of git://neil.brown.name/md
Pull md fixes from Neil Brown:
"Two regression fixes for md, one fairly recent and minor (diskstats
has confusing data) and one older and more serious - RAID0 with
non-power-of-2 chunksize corrupts data.
I guess (almost) no-one uses non-power-of-2 chunks.
Summary:
- Revert recent change which broke IO accounting.
- Fix bug with RAID0 arrays with non-power-of-2 chunk size"
* tag 'md/4.0-rc7-fix' of git://neil.brown.name/md:
md/raid0: fix bug with chunksize not a power of 2.
md: fix md io stats accounting broken
When a new rtnl or xfrm command is added, this part of the code is frequently
missing. Let's help the developer with a build time test.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Almost all arches define ELF_ET_DYN_BASE as 2/3 of TASK_SIZE.
Though it seems that some architectures do this in a wrong way.
The problem is that 2*TASK_SIZE may overflow 32-bits so
the real ELF_ET_DYN_BASE becomes wrong.
Fix this overflow by dividing TASK_SIZE prior to multiplying:
(TASK_SIZE / 3 * 2)
Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com>
Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no>
ARM/ARM64: fixes for live migration, irqfd and ioeventfd support (enabling
vhost, too), page aging
s390: interrupt handling rework, allowing to inject all local interrupts
via new ioctl and to get/set the full local irq state for migration
and introspection. New ioctls to access memory by virtual address,
and to get/set the guest storage keys. SIMD support.
MIPS: FPU and MIPS SIMD Architecture (MSA) support. Includes some patches
from Ralf Baechle's MIPS tree.
x86: bugfixes (notably for pvclock, the others are small) and cleanups.
Another small latency improvement for the TSC deadline timer.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJVJ9vmAAoJEL/70l94x66DoMEH/R3rh8IMf4jTiWRkcqohOMPX
k1+NaSY/lCKayaSgggJ2hcQenMbQoXEOdslvaA/H0oC+VfJGK+lmU6E63eMyyhjQ
Y+Px6L85NENIzDzaVu/TIWWuhil5PvIRr3VO8cvntExRoCjuekTUmNdOgCvN2ObW
wswN2qRdPIeEj2kkulbnye+9IV4G0Ne9bvsmUdOdfSSdi6ZcV43JcvrpOZT++mKj
RrKB+3gTMZYGJXMMLBwMkdl8mK1ozriD+q0mbomT04LUyGlPwYLl4pVRDBqyksD7
KsSSybaK2E4i5R80WEljgDMkNqrCgNfg6VZe4n9Y+CfAAOToNnkMJaFEi+yuqbs=
=yu2b
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"First batch of KVM changes for 4.1
The most interesting bit here is irqfd/ioeventfd support for ARM and
ARM64.
Summary:
ARM/ARM64:
fixes for live migration, irqfd and ioeventfd support (enabling
vhost, too), page aging
s390:
interrupt handling rework, allowing to inject all local interrupts
via new ioctl and to get/set the full local irq state for migration
and introspection. New ioctls to access memory by virtual address,
and to get/set the guest storage keys. SIMD support.
MIPS:
FPU and MIPS SIMD Architecture (MSA) support. Includes some
patches from Ralf Baechle's MIPS tree.
x86:
bugfixes (notably for pvclock, the others are small) and cleanups.
Another small latency improvement for the TSC deadline timer"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (146 commits)
KVM: use slowpath for cross page cached accesses
kvm: mmu: lazy collapse small sptes into large sptes
KVM: x86: Clear CR2 on VCPU reset
KVM: x86: DR0-DR3 are not clear on reset
KVM: x86: BSP in MSR_IA32_APICBASE is writable
KVM: x86: simplify kvm_apic_map
KVM: x86: avoid logical_map when it is invalid
KVM: x86: fix mixed APIC mode broadcast
KVM: x86: use MDA for interrupt matching
kvm/ppc/mpic: drop unused IRQ_testbit
KVM: nVMX: remove unnecessary double caching of MAXPHYADDR
KVM: nVMX: checks for address bits beyond MAXPHYADDR on VM-entry
KVM: x86: cache maxphyaddr CPUID leaf in struct kvm_vcpu
KVM: vmx: pass error code with internal error #2
x86: vdso: fix pvclock races with task migration
KVM: remove kvm_read_hva and kvm_read_hva_atomic
KVM: x86: optimize delivery of TSC deadline timer interrupt
KVM: x86: extract blocking logic from __vcpu_run
kvm: x86: fix x86 eflags fixed bit
KVM: s390: migrate vcpu interrupt state
...
This update adds install and packaging tools developed on top
of back-end shared logic enhancemnets to run and install tests.
In addition several timer tests are added.
- New timer tests from John Stultz
- rtc test from Prarit Bhargava
- Enhancements to un and install tests from Michael Ellerman
- Install and packaging tools from Shuah Khan
- Cross-compilation enablement from Tyler Baker
- A couple of bug fixes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=M1zT
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest updates from Shuah Khan:
"This is a milestone update in a sense. Several new tests and install
and packaging support is added in this update.
This update adds install and packaging tools developed on top of
back-end shared logic enhancemnets to run and install tests. In
addition several timer tests are added.
- New timer tests from John Stultz
- rtc test from Prarit Bhargava
- Enhancements to un and install tests from Michael Ellerman
- Install and packaging tools from Shuah Khan
- Cross-compilation enablement from Tyler Baker
- A couple of bug fixes"
* tag 'linux-kselftest-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (42 commits)
ftracetest: Do not use usleep directly
selftest/mqueue: enable cross compilation
selftest/ipc: enable cross compilation
selftest/memfd: include default header install path
selftest/mount: enable cross compilation
selftest/memfd: enable cross compilation
kselftests: timers: Make set-timer-lat fail more gracefully for !CAP_WAKE_ALARM
selftests: Change memory on-off-test.sh name to be unique
selftests: change cpu on-off-test.sh name to be unique
selftests/mount: Make git ignore all binaries in mount test suite
kselftests: timers: Reduce default runtime on inconsistency-check and set-timer-lat
ftracetest: Convert exit -1 to exit $FAIL
ftracetest: Cope properly with stack tracer not being enabled
tools, update rtctest.c to verify passage of time
Documentation, split up rtc.txt into documentation and test file
selftests: Add tool to generate kselftest tar archive
selftests: Add kselftest install tool
selftests: Set CC using CROSS_COMPILE once in lib.mk
selftests: Add install support for the powerpc tests
selftests/timers: Use shared logic to run and install tests
...
Similar to the Intel implementation, but instead of just falling back to a
global linear list when we have an overlapping userptr request we accumulate
all overlapping userptrs in a local list.
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This allows selecting CONFIG_MMU_NOTIFIER if it isn't already selected.
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch changes sets to support variable sized set element keys / data
up to 64 bytes each by using variable sized set extensions. This allows
to use concatenations with bigger data items suchs as IPv6 addresses.
As a side effect, small keys/data now don't require the full 16 bytes
of struct nft_data anymore but just the space they need.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Add a size argument to nft_data_init() and pass in the available space.
This will be used by the following patches to support variable sized
set element data.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Switch the nf_tables registers from 128 bit addressing to 32 bit
addressing to support so called concatenations, where multiple values
can be concatenated over multiple registers for O(1) exact matches of
multiple dimensions using sets.
The old register values are mapped to areas of 128 bits for compatibility.
When dumping register numbers, values are expressed using the old values
if they refer to the beginning of a 128 bit area for compatibility.
To support concatenations, register loads of less than a full 32 bit
value need to be padded. This mainly affects the payload and exthdr
expressions, which both unconditionally zero the last word before
copying the data.
Userspace fully passes the testsuite using both old and new register
addressing.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Add helper functions to parse and dump register values in netlink attributes.
These helpers will later be changed to take care of translation between the
old 128 bit and the new 32 bit register numbers.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Simple conversion to use u32 pointers to the beginning of the data
area to keep follow up patches smaller.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Only needlessly complicates things due to requiring specific argument
types. Use memcmp directly.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Simple conversion to use u32 pointers to the beginning of the registers
to keep follow up patches smaller.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Replace the array of registers passed to expressions by a struct nft_regs,
containing the verdict as a seperate member, which aliases to the
NFT_REG_VERDICT register.
This is needed to seperate the verdict from the data registers completely,
so their size can be changed.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Previous patch modified the in memory struct but it's not written in
quota tree until next commit.
So user will still get old data using "btrfs qgroup show" after
assign/remove.
This patch will call btrfs_run_qgroups in assign ioctl so it will be
updated to in memory quota trees and user will get up-to-date results.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Operation like qgroups assigning/deleting qgroup relations will mostly
cause qgroup data inconsistent, since it needs to do the full rescan to
determine whether shared extents are exclusive or still shared in
parent qgroups.
But there are some exceptions, like qgroup with only exclusive extents
(qgroup->excl == qgroup->rfer), in that case, we only needs to
modify all its parents' excl and rfer.
So this patch adds a quick path for such qgroup in qgroup
assign/remove routine, and if quick path failed, the qgroup status will
be marked INCONSISTENT, and return 1 to info user-land.
BTW since the quick path is much the same of qgroup_excl_accounting(),
so move the core of it to __qgroup_excl_accounting() and reuse it.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
we forgot to clear STATUS_FLAG_ON in quota_disable(), it
will cause a problem shown as below:
# mount /dev/sdc /mnt
# btrfs quota enable /mnt
# btrfs quota disable /mnt
# btrfs quota rescan /mnt
quota rescan started <--- expecting it fail here.
# echo $?
0
Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Update qgroup status when rescan is done.
Before this patch, status item is not updated on rescan finish, which
causing the RESCAN and INCONSISTENT flags never cleared.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Old qgroup_rescan_leaf() comment indicates ret == 2 as complete and
cleared INCONSISTENT flag.
This is not true since it will never return 2, and inside it no codes
will clear INCONSISTENT flag.
The flag clearance is done in btrfs_qgroup_rescan_work().
This caused the bug that INCONSISTENT flag is never cleared.
So change the comment and fix the dead judgment.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Btrfs will create qgroup on subvolume creation if quota is enabled, but
qgroup uses the high bits(currently 16 bits) as level, to build the
inheritance.
However it is fully possible a subvolume can be created with a
subvolumeid larger than 1 << BTRFS_QGROUP_LEVEL_SHIFT, so it will be
considered as level 1 and can't be assigned to other qgroup in level 1.
This patch will prevent such things so qgroup inheritance will not be
screwed up.
The downside is very clear, btrfs subvolume number limit will decrease
from (u64 max - 256(fisrt free objectid) - 256(last free objectid)) to
(u48 max -256(first free objectid)).
But we still have near u48(that's 15 digits in dec), so that should not
be a huge problem.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Although we have qgroup level check in btrfs-progs, it's not enough
since other programe may still call ioctl directly not using
btrfs-progs. For example, systemd.
But it's btrfs-progs to be blame since we don't provide a
full-function(like subvolume create things) btrfs library with enough
check, and only rely on kernel ioctl.
So Add level checks in kernel too.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
When a qgroup has parents but no child, it should be removable in
Theory I think. But currently, we can not remove it when it has
either parent or child.
Example:
# btrfs quota enable /mnt
# btrfs qgroup create 1/0 /mnt
# btrfs qgroup create 2/0 /mnt
# btrfs qgroup assign 1/0 2/0 /mnt
# btrfs qgroup show -pcre /mnt
qgroupid rfer excl max_rfer max_excl parent child
-------- ---- ---- -------- -------- ------ -----
0/5 16384 16384 0 0 --- ---
1/0 0 0 0 0 2/0 ---
2/0 0 0 0 0 --- 1/0
At this time, there is no subvol or qgroup depending on it.
Just a qgroup 2/0 is its parent, but 2/0 can work well without
1/0. So I think 1/0 should be removalbe. But:
# btrfs qgroup destroy 1/0 /mnt
ERROR: unable to destroy quota group: Device or resource busy
This patch remove the check of qgroup->parent in removing it,
then we can remove a qgroup when it has a parent.
Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
When we create a subvol inheriting a qgroup, we need to check the level
of them. Otherwise, there is a chance a qgroup can inherit another qgroup
at the same level.
Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
There are two problems in qgroup:
a). The PAGE_CACHE is 4K, even when we are writing a data of 1K,
qgroup will reserve a 4K size. It will cause the last 3K in a qgroup
is not available to user.
b). When user is writing a inline data, qgroup will not reserve it,
it means this is a window we can exceed the limit of a qgroup.
The main idea of this patch is reserving the data size of write_bytes
rather than the reserve_bytes. It means qgroup will not care about
the data size btrfs will reserve for user, but only care about the
data size user is going to write. Then reserve it when user want to
write and release it in transaction committed.
In this way, qgroup can be released from the complex procedure in
btrfs and only do the reserve when user want to write and account
when the data is written in commit_transaction().
Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
Currenly, in data writing, ->reserved is accounted in
fill_delalloc(), but ->may_use is released in clear_bit_hook()
which is called by btrfs_finish_ordered_io(). That's too late,
that said, between fill_delalloc() and btrfs_finish_ordered_io(),
the data is doublely accounted by qgroup. It will cause some
unexpected -EDQUOT.
Example:
# btrfs quota enable /root/btrfs-auto-test/
# btrfs subvolume create /root/btrfs-auto-test//sub
Create subvolume '/root/btrfs-auto-test/sub'
# btrfs qgroup limit 1G /root/btrfs-auto-test//sub
dd if=/dev/zero of=/root/btrfs-auto-test//sub/file bs=1024 count=1500000
dd: error writing '/root/btrfs-auto-test//sub/file': Disk quota exceeded
681353+0 records in
681352+0 records out
697704448 bytes (698 MB) copied, 8.15563 s, 85.5 MB/s
It's (698 MB) when we got an -EDQUOT, but we limit it by 1G.
This patch move the btrfs_qgroup_reserve/free() for data from
btrfs_delalloc_reserve/release_metadata() to btrfs_check_data_free_space()
and btrfs_free_reserved_data_space(). Then the accounter in qgroup
will be updated at the same time with the accounter in space_info updated.
In this way, the unexpected -EDQUOT will be killed.
Reported-by: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com>
Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
Currently, for pre_alloc or delay_alloc, the bytes will be accounted
in space_info by the three guys.
space_info->bytes_may_use --- space_info->reserved --- space_info->used.
But on the other hand, in qgroup, there are only two counters to account the
bytes, qgroup->reserved and qgroup->excl. And qg->reserved accounts
bytes in space_info->bytes_may_use and qg->excl accounts bytes in
space_info->used. So the bytes in space_info->reserved is not accounted
in qgroup. If so, there is a window we can exceed the quota limit when
bytes is in space_info->reserved.
Example:
# btrfs quota enable /mnt
# btrfs qgroup limit -e 10M /mnt
# for((i=0;i<20;i++));do fallocate -l 1M /mnt/data$i; done
# sync
# btrfs qgroup show -pcre /mnt
qgroupid rfer excl max_rfer max_excl parent child
-------- ---- ---- -------- -------- ------ -----
0/5 20987904 20987904 0 10485760 --- ---
qg->excl is 20987904 larger than max_excl 10485760.
This patch introduce a new counter named may_use to qgroup, then
there are three counters in qgroup to account bytes in space_info
as below.
space_info->bytes_may_use --- space_info->reserved --- space_info->used.
qgroup->may_use --- qgroup->reserved --- qgroup->excl
With this patch applied:
# btrfs quota enable /mnt
# btrfs qgroup limit -e 10M /mnt
# for((i=0;i<20;i++));do fallocate -l 1M /mnt/data$i; done
fallocate: /mnt/data9: fallocate failed: Disk quota exceeded
fallocate: /mnt/data10: fallocate failed: Disk quota exceeded
fallocate: /mnt/data11: fallocate failed: Disk quota exceeded
fallocate: /mnt/data12: fallocate failed: Disk quota exceeded
fallocate: /mnt/data13: fallocate failed: Disk quota exceeded
fallocate: /mnt/data14: fallocate failed: Disk quota exceeded
fallocate: /mnt/data15: fallocate failed: Disk quota exceeded
fallocate: /mnt/data16: fallocate failed: Disk quota exceeded
fallocate: /mnt/data17: fallocate failed: Disk quota exceeded
fallocate: /mnt/data18: fallocate failed: Disk quota exceeded
fallocate: /mnt/data19: fallocate failed: Disk quota exceeded
# sync
# btrfs qgroup show -pcre /mnt
qgroupid rfer excl max_rfer max_excl parent child
-------- ---- ---- -------- -------- ------ -----
0/5 9453568 9453568 0 10485760 --- ---
Reported-by: Cyril SCETBON <cyril.scetbon@free.fr>
Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
When we exceed quota limit in writing, we will free
some reserved extent when we need to drop but not free
account in qgroup. It means, each time we exceed quota
in writing, there will be some remain space in qg->reserved
we can not use any more. If things go on like this, the
all space will be ate up.
Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
btrfs_limit_group use arg limit to override the old qgroup_limit of
corresponding qgroup. However, we should override part of old qgroup_limit
according to the bit which has been set in arg limit.
Signed-off-by: Fan Chengniang <fancn.fnst@cn.fujitsu.com>
Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
When we commit_transaction(), qgroups in btree should be updated.
But, limit info is not considered currently. It will cause a problem
when a qgroup of a snapshot inherit the limit info from srcqgroup,
then there is an inconsistency.
Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
Cleanup: Change the parameter of update_qgroup_limit_item() to the family of
update_qgroup_xxx_item().
Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
When we call btrfs_qgroup_inherit() with BTRFS_QGROUP_INHERIT_SET_LIMITS,
btrfs will update the limit info of qgroup in btree but forget to update
the qgroup in rbtree at the same time. It obviousely will cause an inconsistency.
This patch fix it by updating the rbtree at the same time.
Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
Currently, when we snapshot a subvol, snapshot will not copy the limits
from srcqgroup.
This patch make the qgroup in snapshot inherit the limit info when create
a snapshot.
Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
The struct page is opaque for userspace tools, so it'd be better to save
pfn in order to identify page frames.
The textual output of $debugfs/tracing/trace file remains unchanged and
only raw (binary) data format is changed - but thanks to libtraceevent,
userspace tools which deal with the raw data (like perf and trace-cmd)
can parse the format easily. So impact on the userspace will also be
minimal.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Based-on-patch-by: Joonsoo Kim <js1304@gmail.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/1428298576-9785-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reproduce:
while true; do
dd if=/dev/zero of=/mnt/btrfs/file count=[75% fs_size]
rm /mnt/btrfs/file
done
Then we can see above loop failed on NO_SPACE.
It it long-term problem since very beginning, because delayed-iput
after rm are not run.
We already have commit_transaction() in alloc_space code, but it is
not triggered in above case.
This patch trigger commit_transaction() to run delayed-iput and
reflash pinned-space to to make write success.
It is based on previous fix of delayed-iput in commit_transaction(),
need to be applied on top of:
btrfs: Fix NO_SPACE bug caused by delayed-iput
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
Steps to reproduce:
while true; do
dd if=/dev/zero of=/btrfs_dir/file count=[fs_size * 75%]
rm /btrfs_dir/file
sync
done
And we'll see dd failed because btrfs return NO_SPACE.
Reason:
Normally, btrfs_commit_transaction() call btrfs_run_delayed_iputs()
in end to free fs space for next write, but sometimes it hadn't
done work on time, because btrfs-cleaner thread get delayed-iputs
from list before, but do iput() after next write.
This is log:
[ 2569.050776] comm=btrfs-cleaner func=btrfs_evict_inode() begin
[ 2569.084280] comm=sync func=btrfs_commit_transaction() call btrfs_run_delayed_iputs()
[ 2569.085418] comm=sync func=btrfs_commit_transaction() done btrfs_run_delayed_iputs()
[ 2569.087554] comm=sync func=btrfs_commit_transaction() end
[ 2569.191081] comm=dd begin
[ 2569.790112] comm=dd func=__btrfs_buffered_write() ret=-28
[ 2569.847479] comm=btrfs-cleaner func=add_pinned_bytes() 0 + 32677888 = 32677888
[ 2569.849530] comm=btrfs-cleaner func=add_pinned_bytes() 32677888 + 23834624 = 56512512
...
[ 2569.903893] comm=btrfs-cleaner func=add_pinned_bytes() 943976448 + 21762048 = 965738496
[ 2569.908270] comm=btrfs-cleaner func=btrfs_evict_inode() end
Fix:
Make btrfs_commit_transaction() wait current running btrfs-cleaner's
delayed-iputs() done in end.
Test:
Use script similar to above(more complex),
before patch:
7 failed in 100 * 20 loop.
after patch:
0 failed in 100 * 20 loop.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
space_info's value calculation is some complex and easy to cause
bug, add WARN_ON() to help debug.
Changelog v1->v2:
Put WARN_ON()s under the ENOSPC_DEBUG mount option.
Suggested by: David Sterba <dsterba@suse.cz>
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
Bug1:
space_info->bytes_readonly was set to very large(negative) value in
btrfs_remove_block_group().
Reason:
Current code set block_group_cache->pinned = 0 in btrfs_delete_unused_bgs(),
but above space was not counted to space_info->bytes_readonly.
Then in btrfs_remove_block_group():
block_group->space_info->bytes_readonly -= block_group->key.offset;
We can see following value in trace:
btrfs_remove_block_group: pid=2677 comm=btrfs-cleaner WARNING: bytes_readonly=12582912, key.offset=134217728
Bug2:
space_info->total_bytes_pinned grow to value larger than fs size.
In a 1.2G fs, we can get following trace log:
at first:
ZL_DEBUG: add_pinned_bytes: pid=2710 comm=sync change total_bytes_pinned flags=1 869793792 + 95944704 = 965738496
after some op:
ZL_DEBUG: add_pinned_bytes: pid=2770 comm=sync change total_bytes_pinned flags=1 1780178944 + 95944704 = 1876123648
after some op:
ZL_DEBUG: add_pinned_bytes: pid=3193 comm=sync change total_bytes_pinned flags=1 2924568576 + 95551488 = 3020120064
...
Reason:
Similar to bug1, we also need to adjust space_info->total_bytes_pinned
in above code block.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
If we have any chance to make a successful write, we should not give up.
This patch adjust commit-transaction condition from:
pinned >= wanted
to
left + pinned >= wanted
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
It is another reason for NO_SPACE case.
When we found enough free space in loop and saved them to
max_hole_start/size before, and tail space contains pending extent,
origional innocent max_hole_start/size are reset in retry.
As a result, find_free_dev_extent() returns less space than it can,
and cause NO_SPACE in user program.
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
Old code bypass commit transaction when we don't have enough
pinned space, but another case is there exist freed bgs in current
transction, it have possibility to make alloc_chunk success.
This patch modify the condition to:
if (have_free_bg || have_pinned_space) commit_transaction()
Confirmed above action by printk before and after patch.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
Change nft_validate_input_register() to not only validate the input
register number, but also the length of the load, and rename it to
nft_validate_register_load() to reflect that change.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
