Commit graph

534,192 commits

Author SHA1 Message Date
Alex Deucher
e66582f9ff drm/radeon: add get_allowed_info_register for cayman/TN
Registers that can be fetched from the info ioctl.

Tested-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-03-19 12:26:40 -04:00
Alex Deucher
ff609975e1 drm/radeon: add get_allowed_info_register for EG/BTC
Registers that can be fetched from the info ioctl.

Tested-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-03-19 12:26:39 -04:00
Alex Deucher
c6d2ac2c36 drm/radeon: add get_allowed_info_register for r6xx/r7xx
Registers that can be fetched from the info ioctl.

Tested-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-03-19 12:26:38 -04:00
Alex Deucher
18b53e9057 drm/radeon: add get_allowed_info_register function for r1xx-r5xx
Just a stub.

Tested-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-03-19 12:26:38 -04:00
Alex Deucher
4ce4728b51 drm/radeon: add new callback for info ioctl register accessor
This adds a callback for each asic family to determine what
registers are allowed to be read back via the info ioctl.

The idea here is to allow usermode to query things like GPU status
registers or GPU harvest registers for profiling and determining
the gfx config.

Tested-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-03-19 12:26:37 -04:00
Alex Deucher
5c363a8603 drm/radeon: add INFO query for current sclk/mclk
Allow the UMDs to query the current sclk/mclk
for profiling, etc.

Tested-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-03-19 12:26:36 -04:00
Alex Deucher
9b23bad032 drm/radeon/kv: implement get_current_sclk/mclk
Will be used for exposing current clocks via INFO ioctl.

Tested-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-03-19 12:26:36 -04:00
Alex Deucher
7ce9cdaec3 drm/radeon/tn: implement get_current_sclk/mclk
Will be used for exposing current clocks via INFO ioctl.

Tested-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-03-19 12:26:35 -04:00
Alex Deucher
2f8e1eb7d6 drm/radeon/sumo: implement get_current_sclk/mclk
Will be used for exposing current clocks via INFO ioctl.

Tested-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-03-19 12:26:34 -04:00
Alex Deucher
dbbd3c81b0 drm/radeon/ci: implement get_current_sclk/mclk
Will be used for exposing current clocks via INFO ioctl.

Tested-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-03-19 12:26:34 -04:00
Alex Deucher
ca1110bc5b drm/radeon/si: implement get_current_sclk/mclk
Will be used for exposing current clocks via INFO ioctl.

Tested-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-03-19 12:26:33 -04:00
Alex Deucher
1d633e3a21 drm/radeon/ni: implement get_current_sclk/mclk
Will be used for exposing current clocks via INFO ioctl.

Tested-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-03-19 12:26:32 -04:00
Alex Deucher
da6472f349 drm/radeon: remove some rv7xx leftovers from btc dpm code
Some copy paste leftovers.  No functional change.

Tested-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-03-19 12:26:31 -04:00
Alex Deucher
99550ee9e8 drm/radeon/btc: implement get_current_sclk/mclk
Will be used for exposing current clocks via INFO ioctl.

Tested-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-03-19 12:26:31 -04:00
Alex Deucher
296deb7167 drm/radeon/rv7xx/eg: implement get_current_sclk/mclk
Will be used for exposing current clocks via INFO ioctl.

Tested-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-03-19 12:26:30 -04:00
Alex Deucher
d0a04d3b2e drm/radeon/rv6xx: implement get_current_sclk/mclk
Will be used for exposing current clocks via INFO ioctl.

Tested-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-03-19 12:26:29 -04:00
Alex Deucher
3c94566ce1 drm/radeon/rs780: implement get_current_sclk/mclk
Will be used for exposing current clocks via INFO ioctl.

Tested-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-03-19 12:26:29 -04:00
Alex Deucher
d7dbce09b6 drm/radeon/dpm: add new callbacks to get the current sclk/mclk
Needed to to expose the current clocks via the INFO ioctl.

Tested-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-03-19 12:26:28 -04:00
Alex Deucher
d6d2a1882a drm/radeon: add INFO query for GPU temperature
Useful for profiling.

Tested-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-03-19 12:26:27 -04:00
Maarten Lankhorst
b9729b17a4 drm/radeon: dont switch vt on suspend
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-03-19 12:26:27 -04:00
Alex Deucher
a1dcc2778b drm/radeon: setup quantization_range in AVI infoframe
If the display supports selectable range, set the range
based on what the user has selected for output csc.

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=83226

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-03-19 12:26:26 -04:00
Alex Deucher
643b1f5629 drm/radeon: implement output csc property for DCE5+
Implement the property for DCE5+ asics.  Older asics
require a slightly more complex process.

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=83226

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-03-19 12:26:25 -04:00
Alex Deucher
67ba31d352 drm/radeon: add an output_csc property
This adds the drm property for output csc (e.g.,
transform of output display colorspace).  Currently
only common ones (TV RGB, BT.601, BT.709) are supported,
but bypass and tv rgb are really the only useful ones at
the moment.  Additionally we could expose a user adjustable
matrix in the future.

This commit just adds the property.  The hw support will
be added in subsequent patches.

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=83226

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-03-19 12:26:25 -04:00
Pali Rohár
69540a7c27 ARM: dts: n900: Enable omap sham and include directly omap34xx.dtsi
This patch moves content of file omap34xx-hs.dtsi into omap3-n900.dts and enable
omap sham support (omap HW support for SHA + MD5). After testing both omap hwmod
and omap-sham.ko drivers it looks like signed Nokia X-Loader enable L3 firewall
for omap sham. There is no kernel crash with both official bootloader and crypto
enable bootloader. So we can safely enable sham code.

Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-03-19 09:26:21 -07:00
Peter Chen
467a78c82a usb: chipidea: udc: apply new usb_udc_vbus_handler interface
It can move all pullup/pulldown operation control to udc-core
through usb_gadget_connect/usb_gadget_disconnect according to
vbus status.

Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-03-19 11:26:19 -05:00
Peter Chen
628ef0d273 usb: udc: add usb_udc_vbus_handler
This commit updates udc core vbus status, and try to connect
or disconnect gadget.

Signed-off-by: Peter Chen <peter.chen@freescale.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-03-19 11:26:03 -05:00
David S. Miller
c9bdc0dde1 Merge branch 'tipc-next'
Erik Hugne says:

====================
tipc: small bugfix an support for datagram connect()

Most notable in this series is patch#3 that allows programs to associate
a tipc address with a connectionless (RDM/DGRAM) socket.

v2: Fix indent issue in patch#3
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-19 12:26:01 -04:00
Erik Hugne
f2f8036e39 tipc: add support for connect() on dgram/rdm sockets
Following the example of ip4_datagram_connect, we store the
address in the socket structure for dgram/rdm sockets and use
that as the default destination for subsequent send() calls.
It is allowed to connect to any address types, and the behaviour
of send() will be the same as a normal sendto() with this address
provided. Binding to an AF_UNSPEC address clears the association.

Signed-off-by: Erik Hugne <erik.hugne@ericsson.com>
Reviewed-by: Ying Xue <ying.xue@windriver.com>
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-19 12:25:54 -04:00
Erik Hugne
3bd88ee7a2 tipc: do not report -EHOSTUNREACH for failed local delivery
Since commit 1186adf7df ("tipc: simplify message forwarding and
rejection in socket layer") -EHOSTUNREACH is propagated back to
the sending process if we fail to deliver the message to another
socket local to the node.
This is wrong, host unreachable should only be reported when the
destination port/name does not exist in the cluster, and that
check is always done before sending the message. Also, this
introduces inconsistent sendmsg() behavior for local/remote
destinations. Errors occurring on the receiving side should not
trickle up to the sender. If message delivery fails TIPC should
either discard the packet or reject it back to the sender based
on the destination droppable option.

Signed-off-by: Erik Hugne <erik.hugne@ericsson.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-19 12:25:54 -04:00
Erik Hugne
18d6c58415 tipc: remove redundant call to tipc_node_remove_conn
tipc_node_remove_conn may be called twice if shutdown() is
called on a socket that have messages in the receive queue.
Calling this function twice does no harm, but is unnecessary
and we remove the redundant call.

Signed-off-by: Erik Hugne <erik.hugne@ericsson.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-19 12:25:54 -04:00
Peter Chen
dfea9c9483 usb: udc: store usb_udc pointer in struct usb_gadget
Instead of iterate to find usb_udc according to usb_gadget, this
way is easier.

Alan Stern suggests this way too:
http://marc.info/?l=linux-usb&m=142168496528894&w=2

Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-03-19 11:25:46 -05:00
Pali Rohár
a494e32d3a ARM: dts: n9/n950: Enable omap crypto support
Harmattan system on Nokia N9 and N950 devices uses omap crypto support.
Bootloader on those devices is known that it enables HW crypto support.
This patch just include omap36xx.dtsi directly, so aes and sham is enabled.

Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-03-19 09:24:56 -07:00
Vincent Palatin
7252f1bfd4 usb: dwc2: avoid leaking DMA channels on disconnection
When the HCD is disconnected, the DMA transfers still in-flight were cleaned-up
but the count of available DMA channels (e.g. available_host_channels) was not
reset.
The pool of DMA channels can be depleted when doing unclean
disconnection of USB peripherals, and reaches the point where no
transfer was possible until the next reboot/reload of the driver.

Tested by putting a programmable USB mux on the port and randomly
plugging/unpluging a USB HUB with USB mass-storage key, USB-audio and
USB-ethernet dongle connected to its downstream ports, and also doing the
disconnection early while the devices are still enumerating to get more URBs
in-flight.
After the patch, the devices are still enumerating after thousands of cycles,
while the port was totally dead before.

Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
Acked-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-03-19 11:22:57 -05:00
Tony Lindgren
a710d10d02 ARM: dts: Remove PIN_INPUT for dm816x McSPI
On dm816x we have no PIN_INPUT vs PIN_OUTPUT configuration, there
are just pulls. Let's remove the bogus flags.

Cc: Brian Hutchinson <b.hutchman@gmail.com>
Cc: Matthijs van Duin <matthijsvanduin@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-03-19 09:14:36 -07:00
Tony Lindgren
de1a12216a ARM: dts: Add cppi41 support for dm816x MUSB
Looks like we have cppi41 on dm816x just like on am335x.

Cc: Bin Liu <binmlist@gmail.com>
Cc: Brian Hutchinson <b.hutchman@gmail.com>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Matthijs van Duin <matthijsvanduin@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-03-19 09:14:36 -07:00
Tony Lindgren
3438bd2e7b ARM: dts: Fix typo for dm816x usb0_pins
Commit a54879a008 ("ARM: dts: Fix USB dts configuration for dm816x")
attempted to fix the USB features introduced by commit 7800064ba5
("ARM: dts: Add basic dm816x device tree configuration") but obviously
I did not read the dmesg as more USB issues still keep trickling in.

It should be usb1_pins instead not usb0_pins for the second interface
to avoid warnings from pinctrl framework.

Cc: Brian Hutchinson <b.hutchman@gmail.com>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Matthijs van Duin <matthijsvanduin@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-03-19 09:14:35 -07:00
Bjorn Helgaas
85e8a0af37 Merge branches 'pci/iommu' and 'pci/resource' into next
* pci/iommu:
  of: Calculate device DMA masks based on DT dma-range size
  arm: dma-mapping: limit IOMMU mapping size
  PCI: Update DMA configuration from DT
  of/pci: Add of_pci_dma_configure() to update DMA configuration
  PCI: Add helper functions pci_get[put]_host_bridge_device()
  of: Fix size when dma-range is not used
  of: Move of_dma_configure() to device.c to help re-use
  of: iommu: Add ptr to OF node arg to of_iommu_configure()

* pci/resource:
  PCI: Fail pci_ioremap_bar() on unassigned resources
  PCI: Show driver, BAR#, and resource on pci_ioremap_bar() failure
  PCI: Mark invalid BARs as unassigned
  PNP: Don't check for overlaps with unassigned PCI BARs
2015-03-19 10:56:47 -05:00
Shuah Khan
67d8712dcc selftests: Fix build failures when invoked from kselftest target
Several tests that rely on implicit build rules fail to build,
when invoked from the main Makefile kselftest target. These
failures are due to --no-builtin-rules and --no-builtin-variables
options set in the inherited MAKEFLAGS.

--no-builtin-rules eliminates the use of built-in implicit rules
and --no-builtin-variables is for not defining built-in variables.
These two options override the use of implicit rules resulting in
build failures. In addition, inherited LDFLAGS result in build
failures and there is no need to define LDFLAGS.  Clear LDFLAGS
and MAKEFLAG when make is invoked from the main Makefile kselftest
target. Fixing this at selftests Makefile avoids changing the main
Makefile and keeps this change self contained at selftests level.

Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
2015-03-19 09:54:55 -06:00
Mark James
1ac31de744 ARM: socfpga: dts: fix spi1 interrupt
The socfpga.dtsi currently has the wrong interrupt number set for SPI master 1
Trying to use the master without this change results in the kernel boot
process waiting forever for an interrupt that will never occur while
attempting to probe any slave devices configured in the device tree as being
under SPI master 1.

The change works for the Cyclone V, and according to the Arria 5 handbook
should be good there too.

Signed-off-by: Mark James <maj@jamers.net>
Acked-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
2015-03-19 10:51:15 -05:00
Alexandre Belloni
1164f672d7 ARM: at91: drop AT91_TIMER_HZ
Drop AT91_TIMER_HZ as this can be handled using HZ_FIXED. Initial help message
was:

On AT91rm9200 chips where you're using a system clock derived
from the 32768 Hz hardware clock, this tick rate should divide
it exactly: use a power-of-two value, such as 128 or 256, to
reduce timing errors caused by rounding.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-19 16:37:45 +01:00
Alexandre Belloni
23b8408246 ARM: at91: remove hardware.h
hardware.h is now mostyl unused, move the remaining declarations to pm.c and
remove it.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-19 16:37:45 +01:00
Alexandre Belloni
4c8056543e ARM: at91: remove SoC headers
Remove the now useless SoC headers.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-19 16:37:45 +01:00
Alexandre Belloni
f56d8f7c29 ARM: at91: remove useless mach/cpu.h
mach/cpu.h is not used anymore, remove it.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-19 16:37:45 +01:00
Alexandre Belloni
0794261104 ARM: at91: remove unused headers
Following the switch to multiplatform, uncompress.h is not used anymore. Remove
it.
at91_dbgu.h is also not used anymore

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-19 16:37:44 +01:00
Alexandre Belloni
f6d1c094f7 ARM: at91: switch at91_dt_defconfig to multiplatform
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-19 16:37:44 +01:00
Alexandre Belloni
41141127a8 ARM: at91: switch to multiplatform
Switch AT91 to multiplatform as all SoCs are properly handled.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-19 16:37:44 +01:00
Bjorn Helgaas
9e808eb6a7 PCI: Cleanup control flow
Return errors immediately so the straightline path is the normal,
no-error path.  No functional change.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-03-19 10:17:22 -05:00
Yijing Wang
a0c8a4d9f9 sparc/PCI: Claim bus resources before pci_bus_add_devices()
Pci_claim_bus_resources() should be called before pci_bus_add_devices(), or
driver may failed to load, because the resources had not claimed.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-03-19 10:17:20 -05:00
Yijing Wang
b97ea289cf PCI: Assign resources before drivers claim devices (pci_scan_root_bus())
Previously, pci_scan_root_bus() created a root PCI bus, enumerated the
devices on it, and called pci_bus_add_devices(), which made the devices
available for drivers to claim them.

Most callers assigned resources to devices after pci_scan_root_bus()
returns, which may be after drivers have claimed the devices.  This is
incorrect; the PCI core should not change device resources while a driver
is managing the device.

Remove pci_bus_add_devices() from pci_scan_root_bus() and do it after any
resource assignment in the callers.

Note that ARM's pci_common_init_dev() already called pci_bus_add_devices()
after pci_scan_root_bus(), so we only need to remove the first call:

  pci_common_init_dev
    pcibios_init_hw
      pci_scan_root_bus
        pci_bus_add_devices        # first call
    pci_bus_assign_resources
    pci_bus_add_devices            # second call

[bhelgaas: changelog, drop "root_bus" var in alpha common_init_pci(),
return failure earlier in mn10300, add "return" in x86 pcibios_scan_root(),
return early if xtensa platform_pcibios_fixup() fails]
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Richard Henderson <rth@twiddle.net>
CC: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
CC: Matt Turner <mattst88@gmail.com>
CC: David Howells <dhowells@redhat.com>
CC: Tony Luck <tony.luck@intel.com>
CC: Michal Simek <monstr@monstr.eu>
CC: Ralf Baechle <ralf@linux-mips.org>
CC: Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
CC: Sebastian Ott <sebott@linux.vnet.ibm.com>
CC: "David S. Miller" <davem@davemloft.net>
CC: Chris Metcalf <cmetcalf@ezchip.com>
CC: Chris Zankel <chris@zankel.net>
CC: Max Filippov <jcmvbkbc@gmail.com>
CC: Thomas Gleixner <tglx@linutronix.de>
2015-03-19 10:17:13 -05:00
Nicolas Iooss
ea6edfbcef mac802154: fix typo in header guard
Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Fixes: b6eea9ca35 ("mac802154: introduce driver-ops header")
Acked-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-03-19 15:32:22 +01:00