Commit graph

534,192 commits

Author SHA1 Message Date
Grygorii Strashko
6248015d68 ARM: omap-device: add missed callback for suspend-to-disk
Add missed callback needed for supporting suspend-to-disk (hibernation) mode.

Signed-off-by: Grygorii Strashko <Grygorii.Strashko@linaro.org>
Acked-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-03-16 16:21:21 -07:00
Felipe Balbi
026da812a0 MAINTAINERS: add OMAP defconfigs under OMAP SUPPORT
omap2plus_defconfig and omap1_defconfig are also
part of the OMAP Support maintained, because of
that it's best to list them under OMAP SUPPORT on
MAINTAINERS so people know to Cc linux-omap when
patching them.

Reported-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-03-16 16:19:14 -07:00
Paul Walmsley
7239d309b5 ARM: OMAP1: PM: fix some build warnings on 1510-only Kconfigs
Building an OMAP1510-only Kconfig generates the following warnings:

arch/arm/mach-omap1/pm.c: In function ¡omap1_pm_idle¢:
arch/arm/mach-omap1/pm.c:123:2: warning: #warning Enable 32kHz OS timer in order to allow sleep states in idle [-Wcpp]
 #warning Enable 32kHz OS timer in order to allow sleep states in idle
  ^
arch/arm/mach-omap1/pm.c: At top level:
arch/arm/mach-omap1/pm.c:76:23: warning: ¡enable_dyn_sleep¢ defined but not used [-Wunused-variable]
 static unsigned short enable_dyn_sleep = 0;
                       ^

These are not so easy to fix in an obviously correct fashion, since I
don't have these devices up and running in my testbed.  So, use
arch/arm/plat-omap/Kconfig and the existing pm.c source as a guide,
and posit that deep power saving states are only supported on OMAP16xx
chips with kernels built with both CONFIG_OMAP_DM_TIMER=y and
CONFIG_OMAP_32K_TIMER=y.

While here, clean up a few printk()s and unnecessary #ifdefs.

This second version of the patch incorporates several suggestions from
Jon Hunter <jgchunter@gmail.com>.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Jon Hunter <jonathanh@nvidia.com>
Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Tuukka Tikkanen <tuukka.tikkanen@linaro.org>
Cc: Kevin Hilman <khilman@deeprootsystems.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: linux-omap@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Acked-by: Jon Hunter <jgchunter@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-03-16 16:09:23 -07:00
Marcelo Tosatti
f710a12d73 Fixes for KVM/ARM for 4.0-rc5.
Fixes page refcounting issues in our Stage-2 page table management code,
 fixes a missing unlock in a gicv3 error path, and fixes a race that can
 cause lost interrupts if signals are pending just prior to entering the
 guest.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJVBs95AAoJEEtpOizt6ddyAfoH/Rwj2T38ZDikImPpgfeFrmJs
 ZlWC+Z3akwjVHPv308/MsKdyashtA7OjiMp3DOheMFMYJay/ecgY/92vFCc6uh5S
 LDoXCbp+Pneth6C6bbU2Gw+aoCD07ZYCn9PeFq40MfpQUhCEGWhx41OFzHppqOZx
 e+jodHRE+sBVTFUtbz+HubAfcM46f/8bP7682CEKsVZPeTSiHyeojdZEglfB37MG
 ar/iC1/cyO/097vWaBqv1t1WZoHbWmMrDlzo5X+AtayVXFNdv4Ztw0Rz2kRhnLB8
 8GXYawoSQoTN8FX1oyTyr5YWcWD7wDTzhcHsHS1xZHhvrdLCEcFrHeEWkuUlYjU=
 =YS6j
 -----END PGP SIGNATURE-----

Merge tag 'kvm-arm-fixes-4.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm

Fixes for KVM/ARM for 4.0-rc5.

Fixes page refcounting issues in our Stage-2 page table management code,
fixes a missing unlock in a gicv3 error path, and fixes a race that can
cause lost interrupts if signals are pending just prior to entering the
guest.
2015-03-16 20:08:56 -03:00
Gaku Inami
a8caad6690 ARM: shmobile: Consolidate the pm code for R-Car Gen2
The pm code for R-Car Gen2 is scatterd in each SoC. These files
(pm-r8a7790.c/pm-r8a7791.c) have some overlap code. This change
consolidate the pm code for R-Car Gen2 into one.

Signed-off-by: Gaku Inami <gaku.inami.xw@bp.renesas.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-03-17 08:05:13 +09:00
Rafael J. Wysocki
ca5b74d267 ACPI: Introduce has_acpi_companion()
Now that the ACPI companions of devices are represented by pointers
to struct fwnode_handle, it is not quite efficient to check whether
or not an ACPI companion of a device is present by evaluating the
ACPI_COMPANION() macro.

For this reason, introduce a special static inline routine for that,
has_acpi_companion(), and update the code to use it where applicable.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-03-16 23:49:08 +01:00
Rafael J. Wysocki
ce793486e2 driver core / ACPI: Represent ACPI companions using fwnode_handle
Now that we have struct fwnode_handle, we can use that to point to
ACPI companions from struct device objects instead of pointing to
struct acpi_device directly.

There are two benefits from that.  First, the somewhat ugly and
hackish struct acpi_dev_node can be dropped and, second, the same
struct fwnode_handle pointer can be used in the future to point
to other (non-ACPI) firmware device node types.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Grant Likely <grant.likely@linaro.org>
2015-03-16 23:49:03 +01:00
Suman Anna
e5ed5b6027 ARM: OMAP2+: Fix socbus family info for AM33xx devices
The family information in the soc-bus data is currently
not classified properly for AM33xx devices, and a read
of /sys/bus/soc/devices/soc0/family currently shows
"Unknown". Fix the same.

Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-03-16 15:30:28 -07:00
Roger Quadros
d37530a0fc ARM: dts: omap3-beagle: Add NAND device
The beagle board contains a 16-bit NAND device connected to
chip select 0 of the GPMC controller.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-03-16 15:11:14 -07:00
Vignesh R
a895b8a0d1 ARM: dts: AM4372: update hdq compatible property
This patch updates hdq node compatible property to "ti,am4372-hdq".

Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-03-16 15:07:15 -07:00
H. Nikolaus Schaller
9ccd0106c9 ARM: dts: omap3-pandora: add DM3730 1 GHz version
Added Pandora 1 GHz model which is based on Classic/Rebirth
with following changes:
- upgraded cpu to dm3730 runs on 1GHz
- 512 MiB DDR-333 SDRAM @ 200 MHz

Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Tested-by: Grazvydas Ignotas <notasas@gmail.com>
Reviewed-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-03-16 15:06:57 -07:00
H. Nikolaus Schaller
b715da74de ARM: dts: omap3-pandora: add OMAP3530 600 MHz version
Added Pandora Rebirth model which is based on Pandora
Classic with 512 MiB DDR-333 SDRAM memory.

Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Tested-by: Grazvydas Ignotas <notasas@gmail.com>
Reviewed-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-03-16 15:06:57 -07:00
H. Nikolaus Schaller
771048f59d ARM: dts: omap3-pandora: add common device tree
This device tree allows to boot, supports the panel,
framebuffer, touch screen, as well as some more peripherals.
Since there is a OMAP3530 based 600 MHz variant and a DM3730 based
1 GHz variant we must include this common device tree code
in one of two CPU specific device trees.

Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Marek Belisko <marek@goldelico.com>
Tested-by: Grazvydas Ignotas <notasas@gmail.com>
Reviewed-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-03-16 15:06:57 -07:00
Peter Ujfalusi
a7390ebe45 ARM: dts: dra7xx-clocks: Add gate clock for CLKOUT2
To be able to control the gate for the clkout2 clock output.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-03-16 15:01:17 -07:00
Matt Porter
5c8a521d44 Documentation: DT: omap_serial: document missing properties and add an example
The omap_serial.txt binding documentation lacks a number of properties
that are used in DTS files for platforms incorporating this peripheral.
Fix this by documenting the missing required and optional fields and
add an example.

Signed-off-by: Matt Porter <mporter@konsulko.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-03-16 14:59:43 -07:00
Simon Horman
78420b5dca ARM: shmobile: r8a7791: Correct SYSCIER value
Set the SYSCIER as per the values indicated in the documentation.
The value previously used appears to been copied from the r8a7779
implementation but on closer inspection is not correct for the r8a7791.

Fixes: 5f6108bb96 ("ARM: shmobile: r8a7791 SYSC setup code")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-03-17 06:46:29 +09:00
Simon Horman
ee72f6adfd ARM: shmobile: r8a7790: Correct SYSCIER value
Set the SYSCIER as per the values indicated in the documentation.
The value previously used appears to been copied from the r8a7779
implementation but on closer inspection is not correct for the r8a7790.

Fixes: a48f165509 ("ARM: shmobile: r8a7790 SYSC setup code")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-03-17 06:46:29 +09:00
Pali Rohár
d6e5b7cc98 ARM: dts: omap3: Add missing dmas for crypto
This patch adds missing dma DTS definitions for omap aes and sham drivers.
Without it kernel drivers do not work for device tree based booting
while it works for legacy booting on general purpose SoCs.

Note that further changes are still needed for high secure SoCs. But since
that never worked in legacy boot mode either, those will be sent separately.

Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Acked-by: Pavel  Machek <pavel@ucw.cz>
[tony@atomide.com: updated comments]
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-03-16 14:43:15 -07:00
Ben Goz
e405ca3a1b drm/radeon: Changing number of compute pipe lines
The current CP firmware can handle Usermode Queues only on MEC1.
To reflect this firmware change, this commit reduces number of compute pipelines
to 4 - 1, from 8 - 1 (the first pipeline is allocated for kgd).

Signed-off-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Cc: stable@vger.kernel.org
2015-03-16 23:36:58 +02:00
Ben Goz
4fadf6b657 drm/amdkfd: Fix SDMA queue init. in non-HWS mode
This patch fixes the SDMA queue initialization, when running in non-HWS mode.

The first fix is to move the initialization of SDMA VM parameters before the
initialization of the SDMA MQD.

The second fix is to load the MQD to an HQD after the initialization of the MQD.

Signed-off-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2015-03-16 23:36:58 +02:00
Ben Goz
aaad2d8c7b drm/amdkfd: destroy mqd when destroying kernel queue
This patch adds a missing destruction of mqd, when destroying a kernel queue.
Without the destruction, there is a memory leakage when repeatedly creating and
destroying kernel queues.

Signed-off-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2015-03-16 23:36:58 +02:00
Thomas Graf
617011e7d5 rhashtable: Avoid calculating hash again to unlock
Caching the lock pointer avoids having to hash on the object
again to unlock the bucket locks.

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-16 17:14:34 -04:00
Stephen Boyd
9e0388c318 arm: qcom: Update defconfig
After removing ARCH_REQUIRE_GPIOLIB we need to select
CONFIG_GPIOLIB to keep building the pinctrl drivers. Make the
defconfig smaller too by running savedefconfig.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Kumar Gala <galak@codeaurora.org>
2015-03-16 16:10:58 -05:00
Rajendra Nayak
fb6e987be4 arm: qcom: Enable lpass clock driver in defconfig
Enable the LPASS clock controller driver so that audio drivers
can enable, disable, and set rates on their clocks.

Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Kumar Gala <galak@codeaurora.org>
[sboyd@codeaurora.org: Enable 8960 driver too]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Kumar Gala <galak@codeaurora.org>
2015-03-16 16:10:29 -05:00
Felipe Balbi
49d094570c ARM: dts: am437x-idk: enable i2c2
i2c2 goes to an expansion connector which we
want to use.

Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-03-16 14:07:16 -07:00
Michal Schmidt
a8e0c246da bnx2x: fix encapsulation features on 57710/57711
E1x chips (57710, 57711(E)) have no support for encapsulation
offload. bnx2x incorrectly advertises the support as available.

Setting of those features is conditional on "!CHIP_IS_E1x(bp)", but
the bp struct is not initialized yet at this point and consequently
any chip passes the check.
The check must use the "chip_is_e1x" local variable instead to work
correctly.

Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-16 17:05:48 -04:00
JeHyeon Yeon
d5e7cafd69 LZ4 : fix the data abort issue
If the part of the compression data are corrupted, or the compression
data is totally fake, the memory access over the limit is possible.

This is the log from my system usning lz4 decompression.
   [6502]data abort, halting
   [6503]r0  0x00000000 r1  0x00000000 r2  0xdcea0ffc r3  0xdcea0ffc
   [6509]r4  0xb9ab0bfd r5  0xdcea0ffc r6  0xdcea0ff8 r7  0xdce80000
   [6515]r8  0x00000000 r9  0x00000000 r10 0x00000000 r11 0xb9a98000
   [6522]r12 0xdcea1000 usp 0x00000000 ulr 0x00000000 pc  0x820149bc
   [6528]spsr 0x400001f3
and the memory addresses of some variables at the moment are
    ref:0xdcea0ffc, op:0xdcea0ffc, oend:0xdcea1000

As you can see, COPYLENGH is 8bytes, so @ref and @op can access the momory
over @oend.

Signed-off-by: JeHyeon Yeon <tom.yeon@windriver.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-16 21:55:35 +01:00
Mahesh Salgaonkar
45706bb53d powerpc/book3s: Fix flush_tlb cpu_spec hook to take a generic argument.
The flush_tlb hook in cpu_spec was introduced as a generic function hook
to invalidate TLBs. But the current implementation of flush_tlb hook
takes IS (invalidation selector) as an argument which is architecture
dependent. Hence, It is not right to have a generic routine where caller
has to pass non-generic argument.

This patch fixes this and makes flush_tlb hook as high level API.

Reported-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-03-17 07:52:48 +11:00
NeilBrown
7cff4b1836 kernfs: handle poll correctly on 'direct_read' files.
Kernfs supports two styles of read: direct_read and seqfile_read.

The latter supports 'poll' correctly thanks to the update of
'->event' in kernfs_seq_show.
The former does not as '->event' is never updated on a read.

So add an appropriate update in kernfs_file_direct_read().

This was noticed because some 'md' sysfs attributes were
recently changed to use direct reads.

Reported-by: Prakash Punnoor <prakash@punnoor.de>
Reported-by: Torsten Kaiser <just.for.lkml@googlemail.com>
Fixes: 750f199ee8
Signed-off-by: NeilBrown <neilb@suse.de>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-16 21:51:20 +01:00
Rostislav Lisovy
5b5e49af05 ARM: dts: am335x: Add Chiliboard DTS
Chiliboard uses ChiliSOM as its base.

Hardware specification:
* ChiliSOM (am335x, PMIC, DRAM, NAND)
* Ethernet PHY (id 0)
* USB host (usb1)
* microSD slot
* 2x GPIO LED

Signed-off-by: Rostislav Lisovy <lisovy@jablotron.cz>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-03-16 13:48:06 -07:00
Arnaldo Carvalho de Melo
446fb96c4a perf hists browser: Fix up some branch alignment
Those asprintf return checks should be aligned with the other
conditionals, fix it.

Also add {} blocks to further clarify.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
echo Link: http://lkml.kernel.org/n/tip-`ranpwd -l 24`@git.kernel.org
Link: http://lkml.kernel.org/n/tip-nqgs07jfphbkw67wja870d3r@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-03-16 17:46:57 -03:00
Rostislav Lisovy
11d938d494 ARM: dts: am335x: Add DTS for ChiliSOM module
Since this is a SOM (System on Module) that will be part
of another embedded board (and can't really exist on its own)
define it as a "dtsi" that will be included in the Device tree
describing the whole system later on.

Hardware specification:
* AM335x SoC
* up to 512 MB RAM
* NAND Flash (8x interface, cs0)
* UART0
* PMIC
* I2C0 (for PMIC)
* 1x Ethernet MAC

Signed-off-by: Rostislav Lisovy <lisovy@jablotron.cz>
[tony@atomide.com: updated nand io size to be just 4]
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-03-16 13:42:10 -07:00
Rostislav Lisovy
1b3a62ae9c ARM: dts: Add vendor prefix for Grinn
Grinn is a company located in Poland, Europe producing
System on Modules.
Webpage: http://www.grinn-global.com/

Signed-off-by: Rostislav Lisovy <lisovy@jablotron.cz>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-03-16 13:42:10 -07:00
Arnaldo Carvalho de Melo
0ba332f70a perf hists browser: Simplify symbol annotation menu setup
No need to repeat some tests, skip annotation instead.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-6h6igrb81u4e6rwfmx7dv47n@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-03-16 17:41:52 -03:00
Eric Dumazet
9f1ab18672 tcp_metrics: fix wrong lockdep annotations
Changes in tcp_metric hash table are protected by tcp_metrics_lock
only, not by genl_mutex

While we are at it use deref_locked() instead of rcu_dereference()
in tcp_new() to avoid unnecessary barrier, as we hold tcp_metrics_lock
as well.

Reported-by: Andrew Vagin <avagin@parallels.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Fixes: 098a697b49 ("tcp_metrics: Use a single hash table for all network namespaces.")
Reviewed-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-16 16:32:23 -04:00
Vaishali Thakkar
03b225b16d pcmcia: Use setup_timer and mod_timer
This patch introduces the use of functions setup_timer
and mod_timer.

This is done using Coccinelle and semantic patch used
for this as follows:

// <smpl>
@@
expression x,y,z,a,b;
@@

-init_timer (&x);
+setup_timer (&x, y, z);
+mod_timer (&a, b);
-x.function = y;
-x.data = z;
-x.expires = b;
-add_timer(&a);

// </smpl>

Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-16 21:31:43 +01:00
Vaishali Thakkar
dae6cdabe4 pcmcia: Use setup_timer
This patch introduces the use of function setup_timer.

This is done using Coccinelle and semantic patch used is
as follows:

@@
expression x,y,z;
@@

- init_timer (&x);
+ setup_timer (&x, y, z);
- x.function = y;
- x.data = z;

Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-16 21:31:43 +01:00
Jiri Pirko
bd76a11670 dsa: change "select" to "depends on" for NET_SWITCHDEV and for NET_DSA
This would fix randconfig compile error:
net/built-in.o: In function `netdev_switch_fib_ipv4_abort':
(.text+0xf7811): undefined reference to `fib_flush_external'

Also it fixes following warnings:
warning: (NET_DSA) selects NET_SWITCHDEV which has unmet direct dependencies (NET && INET)

warning: (NET_DSA_MV88E6060 && NET_DSA_MV88E6131 && NET_DSA_MV88E6123_61_65 && NET_DSA_MV88E6171 && NET_DSA_MV88E6352 && NET_DSA_BCM_SF2) selects NET_DSA which has unmet direct dependencies (NET && HAVE_NET_DSA && NET_SWITCHDEV)

Reported-by: Randy Dunlap <rdunlap@infradead.org>
Suggested-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-16 16:29:18 -04:00
Shaohui Xie
73ee544297 net/fsl: modify xgmac_mdio for little endian SoCs
MDIO controller on little endian Socs, e.g. ls2085a is similar to the
controller on big endian Socs, but the MDIO access is little endian,
we use I/O accessor function to handle endianness, so the driver can
run on little endian Socs. A property "little-endian" is used
in DTS to indicate the MDIO is little endian, if driver probes the
property, driver will access MDIO in little endian, otherwise, driver
works in big endian by default.

Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-16 16:27:51 -04:00
Shaohui Xie
26eee0210a net/fsl: fix a bug in xgmac_mdio
There is a bug in xgmac_wait_until_done() which mdio_stat should be used
instead of mdio_data when checking if busy bit is cleared.

Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-16 16:27:51 -04:00
Ying Xue
c243d7e209 net: kernel socket should be released in init_net namespace
Creating a kernel socket with sock_create_kern() happens in "init_net"
namespace, however, releasing it with sk_release_kernel() occurs in
the current namespace which may be different with "init_net" namespace.
Therefore, we should guarantee that the namespace in which a kernel
socket is created is same as the socket is created.

Signed-off-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-16 16:25:06 -04:00
Thomas Graf
db4374f48a rhashtable: Annotate RCU locking of walkers
Fixes the following sparse warnings:

lib/rhashtable.c:767:5: warning: context imbalance in 'rhashtable_walk_start' - wrong count at exit
lib/rhashtable.c:849:6: warning: context imbalance in 'rhashtable_walk_stop' - unexpected unlock

Fixes: f2dba9c6ff ("rhashtable: Introduce rhashtable_walk_*")
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-16 16:24:13 -04:00
David S. Miller
48b810d9bc Here are a few fixes that I'd like to still get in:
* disable U-APSD for better interoperability, from Michal Kazior
  * drop unencrypted frames in mesh forwarding, from Bob Copeland
  * treat non-QoS/WMM HT stations as non-HT, to fix confusion when
    they connect and then get QoS packets anyway due to HT
  * fix counting interfaces for combination checks, otherwise the
    interface combinations aren't properly enforced (from Andrei)
  * fix pure ECSA by reacting to the IE change
  * ignore erroneous (E)CSA to the current channel which sometimes
    happens due to AP/GO bugs
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABCAAGBQJVBpZgAAoJEDBSmw7B7bqrqsUP/0muBLLr3A+KXTY8OgbR8bbH
 bDp68XPWcPKZyQCGsan+CrChhf1+9/5Mqf6Jf4kwcO1pjm+b9Lz7LVBWY68WLKF6
 MAPBdp0sQ79zw6FT3pISEJ7XVEXH5JZJKjgY834DFTvr2l6k1eRElrEnObc1881V
 ltB++FuRzXeACOJ0PxVm8oTVBhA2GEcYqemJC0RZDFgIk3QVm8116cyEMYzLVvus
 NYX6tHanVfYbE2/mA7nfpWTaXTYzUupFd/ooVonkxB5E76bAFancY19s6Lfm04ye
 c2p7KBm1muaXfGJOBqA9eO+1942gLFINKrzJjN0yJkH1B/QHdVADvuNr3FyblkGW
 W0K5q6u+2LlX8ILBQLPEa5RITqV6qKhr8NX8zvriIA5qS5gJftW0WE+DrA0k65qw
 SRIj6ppPoYvEzU2KMbJenxG+fSNZZNESDAa9uWt1tyT3eyev+YBC9bl57oFUGjaS
 49y2SDLlD0FTNezhbscMPZ9JxodN3NfbRzF+4FtOQluE/o+7YLvZVCA1Jt/Vfjs1
 unurv8RKHqzTPCGBfDtVRuwtgTr6LTTl1UTFRyM0wyJYfUzGTII4Rp7GWzNd70ZI
 mZSAnTyBiOSBuQNNjhwxnhNSn9Hq5PITHs2q3vbzQe7VoqUE+OThbQbW2+0lAisJ
 oKTqesKeJU3WtLofpWiq
 =Ecdh
 -----END PGP SIGNATURE-----

Merge tag 'mac80211-for-davem-2015-03-16' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211

Johannes Berg says:

====================
Here are a few fixes that I'd like to still get in:
 * disable U-APSD for better interoperability, from Michal Kazior
 * drop unencrypted frames in mesh forwarding, from Bob Copeland
 * treat non-QoS/WMM HT stations as non-HT, to fix confusion when
   they connect and then get QoS packets anyway due to HT
 * fix counting interfaces for combination checks, otherwise the
   interface combinations aren't properly enforced (from Andrei)
 * fix pure ECSA by reacting to the IE change
 * ignore erroneous (E)CSA to the current channel which sometimes
   happens due to AP/GO bugs
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-16 16:17:48 -04:00
David S. Miller
ca00942a81 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:

====================
pull request (net): ipsec 2015-03-16

1) Fix the network header offset in _decode_session6
   when multiple IPv6 extension headers are present.
   From Hajime Tazaki.

2) Fix an interfamily tunnel crash. We set outer mode
   protocol too early and may dispatch to the wrong
   address family. Move the setting of the outer mode
   protocol behind the last accessing of the inner mode
   to fix the crash.

3) Most callers of xfrm_lookup() expect that dst_orig
   is released on error. But xfrm_lookup_route() may
   need dst_orig to handle certain error cases. So
   introduce a flag that tells what should be done in
   case of error. From Huaibin Wang.

Please pull or let me know if there are problems.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-16 16:16:49 -04:00
Abhilash Kesavan
0ab163ad1e misc: sram: switch to ioremap_wc from ioremap
Currently, the SRAM allocator returns device memory via ioremap.
This causes issues on ARM64 when the internal SoC SRAM allocated by
the generic sram driver is used for audio playback. The destination
buffer address (which is ioremapped SRAM) is not 64-bit aligned for
certain streams (e.g. 44.1k sampling rate). In such cases we get
unhandled alignment faults. Use ioremap_wc in place of ioremap which
gives us normal non-cacheable memory instead of device memory.

Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-16 21:11:32 +01:00
Abhilash Kesavan
34644524bc lib: devres: add a helper function for ioremap_wc
Implement a resource managed writecombine ioremap function.

Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-16 21:11:32 +01:00
Abhilash Kesavan
71a49d16f0 m32r: add definition of ioremap_wc to io.h
Before adding a resource managed ioremap_wc function, we need
to have ioremap_wc defined for m32r to prevent build errors.

Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-16 21:11:32 +01:00
Jean Delvare
be7bee9f80 misc: bh1780: Add module aliases
The bh1780gli driver does not create an i2c module alias for the
device it supports, preventing the driver from being loaded
automatically when needed on non-OF/DT systems. Add it.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-16 21:10:28 +01:00
Valentin Rothberg
b1a3f24348 checkkconfigsymbols.py: make it Git aware
The script now supports to check a specified commit or a specified range
of commits (i.e., commit1..commit2).  Developers and maintainers are
encouraged to use this functionality before sending or merging patches
to avoid potential bugs and to keep the code, documentation, etc. clean.

This patch adds the following options to the script:

 -c COMMIT, --commit=COMMIT
                  Check if the specified commit (hash) introduces
                  undefined Kconfig symbols.

 -d DIFF, --diff=DIFF
                  Diff undefined symbols between two commits.  The input
                  format bases on Git log's 'commmit1..commit2'.

  --force         Reset current Git tree even when it's dirty.

Note that the first two options require to 'git reset --hard' the user's
Git tree.  This hard reset is necessary to keep the script fast, but it
can lead to the loss of uncommitted data.  Hence, the script aborts in
case it is executed in a dirty tree.  It won't abort if '--force' is
passed.

If neither -c nor -d is specified, the script defaults to check the
entire local tree (i.e., the previous behavior).

Signed-off-by: Valentin Rothberg <valentinrothberg@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-16 21:10:28 +01:00
Fabian Frederick
da2ff527e4 char: constify of_device_id array
of_device_id is always used as const.
(See driver.of_match_table and open firmware functions)

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-16 21:10:28 +01:00