Commit graph

534,192 commits

Author SHA1 Message Date
Linus Torvalds
53da3bc2ba mm: fix up numa read-only thread grouping logic
Dave Chinner reported that commit 4d94246699 ("mm: convert
p[te|md]_mknonnuma and remaining page table manipulations") slowed down
his xfsrepair test enormously.  In particular, it was using more system
time due to extra TLB flushing.

The ultimate reason turns out to be how the change to use the regular
page table accessor functions broke the NUMA grouping logic.  The old
special mknuma/mknonnuma code accessed the page table present bit and
the magic NUMA bit directly, while the new code just changes the page
protections using PROT_NONE and the regular vma protections.

That sounds equivalent, and from a fault standpoint it really is, but a
subtle side effect is that the *other* protection bits of the page table
entries also change.  And the code to decide how to group the NUMA
entries together used the writable bit to decide whether a particular
page was likely to be shared read-only or not.

And with the change to make the NUMA handling use the regular permission
setting functions, that writable bit was basically always cleared for
private mappings due to COW.  So even if the page actually ends up being
written to in the end, the NUMA balancing would act as if it was always
shared RO.

This code is a heuristic anyway, so the fix - at least for now - is to
instead check whether the page is dirty rather than writable.  The bit
doesn't change with protection changes.

NOTE! This also adds a FIXME comment to revisit this issue,

Not only should we probably re-visit the whole "is this a shared
read-only page" heuristic (we might want to take the vma permissions
into account and base this more on those than the per-page ones, and
also look at whether the particular access that triggers it is a write
or not), but the whole COW issue shows that we should think about the
NUMA fault handling some more.

For example, maybe we should do the early-COW thing that a regular fault
does.  Or maybe we should accept that while using the same bits as
PROTNONE was a good thing (and got rid of the specual NUMA bit), we
might still want to just preseve the other protection bits across NUMA
faulting.

Those are bigger questions, left for later.  This just fixes up the
heuristic so that it at least approximates working again.  More analysis
and work needed.

Reported-by: Dave Chinner <david@fromorbit.com>
Tested-by: Mel Gorman <mgorman@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>,
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-03-12 08:45:46 -07:00
David Ahern
6d4a48968b perf probe: Fix compiles due to declarations using perf_probe_point
perf fails to build with gcc "(GCC) 4.4.7 20120313 (Red Hat
4.4.7-4.0.9)" (a.k.a., RHEL6 / CentOS 6 / OL 6):

  cc1: warnings being treated as errors
  util/probe-event.c: In function ‘get_alternative_line_range’:
  util/probe-event.c:359: error: missing initializer
  util/probe-event.c:359: error: (near initialization for ‘pp.file’)
  util/probe-event.c:359: error: missing initializer
  util/probe-event.c:359: error: (near initialization for ‘result.function’)

Fix by bringing in initializers to declaration.

Signed-off-by: David Ahern <david.ahern@oracle.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Link: http://lkml.kernel.org/r/1426084580-60780-1-git-send-email-david.ahern@oracle.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-03-12 12:40:00 -03:00
He Kuang
a8cd1f4393 perf hists browser: Fix UI bug after zoom into thread/dso/symbol
When zoom into thread/dso/symbol, the fold/unfold stat is cleared in
hists__filter_by_thread/dso/symbol(), but h->nr_rows is not cleared. So
if we toggle fold stat on the unfold entires, nr_entries got a wrong
value.

This bug can be reproduced as follows:

$ perf record -g -e syscalls:sys_enter_open ls
$ perf report

    Children      Self  Command  Shared Object            Symbol
  ================================================================
  +   50.00%     0.00%  ls       ld64.so  [.]  _dl_get_ready_to_run
  -   50.00%     0.00%  ls       ld64.so  [.]  _dl_load_shared_library
      _dl_load_shared_library <= [Zoom into thread/dso]
      _dl_get_ready_to_run
      _start
  ...

In the new thread hists, all entries reset to fold, if we unfold the
same entry as we previously unfolded, nr_entries got wrong value, and we
can't move down cursor to bottom row.

                                                         Thread: ls
    Children      Self  Command  Shared Object            Symbol
  ================================================================
  +   50.00%     0.00%  ls       ld64.so  [.]  _dl_get_ready_to_run
  -   50.00%     0.00%  ls       ld64.so  [.]  _dl_load_shared_library
      _dl_load_shared_library
      _dl_get_ready_to_run <= [cursor may stop here, can't move down]
      _start
  ...

This patch clear h->nr_rows to fix this bug.

Signed-off-by: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1426077363-855-2-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-03-12 12:39:59 -03:00
He Kuang
a78604deff perf probe: Fix possible double free on error
A double free occurred when get source file path failed. If lr->path
failed to assign a new value, it will be freed as the old path and then
be freed again during line_range__clear(), and causes this:

  $ perf probe -L do_execve -k vmlinux
  *** Error in `/usr/bin/perf': double free or corruption (fasttop):
      0x0000000000a9ac50 ***
  ======= Backtrace: =========
  ../lib64/libc.so.6(+0x6eeef)[0x7ffff5e44eef]
  ../lib64/libc.so.6(+0x78cae)[0x7ffff5e4ecae]
  ../lib64/libc.so.6(+0x79987)[0x7ffff5e4f987]
  ../bin/perf[0x4ab41f]
  ...

This patch fix this problem.

Signed-off-by: He Kuang <hekuang@huawei.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1425463302-1687-1-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-03-12 12:39:58 -03:00
Arnaldo Carvalho de Melo
443a70541c perf tools: Output feature detection's gcc output to a file
So that we can debug feature detection problems.

It will appear on $(OUTPUT)feature-checks/.make-libbabeltrace.output,
using the libbabeltrace feature test.

Whole process:

  [acme@ssdandy linux]$ make -C tools/perf install-bin
  make: Entering directory `/home/acme/git/linux/tools/perf'
    BUILD:   Doing 'make -j8' parallel build
  config/Makefile:425: No libunwind found. Please install libunwind-dev[el] >= 1.1 and/or set LIBUNWIND_DIR
  config/Makefile:709: No libbabeltrace found, disables 'perf data' CTF format support, please install libbabeltrace-dev[el]/libbabeltrace-ctf-dev

  Auto-detecting system features:
  ...                         dwarf: [ on  ]
  ...                         glibc: [ on  ]
  ...                          gtk2: [ on  ]
  ...                      libaudit: [ on  ]
  ...                        libbfd: [ on  ]
  ...                        libelf: [ on  ]
  ...                       libnuma: [ on  ]
  ...                       libperl: [ on  ]
  ...                     libpython: [ on  ]
  ...                      libslang: [ on  ]
  ...                     libunwind: [ OFF ]
  ...            libdw-dwarf-unwind: [ on  ]
  ...                 libbabeltrace: [ OFF ]
  <SNIP>
  [acme@ssdandy linux]$ find tools/perf -name ".make-*.output" | grep lib | tail -5
  tools/perf/config/feature-checks/.make-libdw-dwarf-unwind.output
  tools/perf/config/feature-checks/.make-libbabeltrace.output
  tools/perf/config/feature-checks/.make-zlib.output
  tools/perf/config/feature-checks/.make-liberty.output
  tools/perf/config/feature-checks/.make-liberty-z.output
  [acme@ssdandy linux]$
  [acme@ssdandy linux]$ cat tools/perf/config/feature-checks/.make-libbabeltrace.output
  make[1]: Entering directory `/home/acme/git/linux/tools/perf/config/feature-checks'
  gcc -MD  -Wall -Werror -o test-libbabeltrace.bin test-libbabeltrace.c -Wl,-z,noexecstack  -lbabeltrace-ctf # -lbabeltrace provided by
  test-libbabeltrace.c:2:42: fatal error: babeltrace/ctf-writer/writer.h: No such file or directory
    #include <babeltrace/ctf-writer/writer.h>
                                          ^
  compilation terminated.
  make[1]: *** [test-libbabeltrace.bin] Error 1
  make[1]: Leaving directory `/home/acme/git/linux/tools/perf/config/feature-checks'
  [acme@ssdandy linux]$

So the libbabeltrace feature will not be builtin, but if we do what is required for it
to be built, namely point where we have it installed:

  [acme@ssdandy linux]$ time make -C tools/perf LIBBABELTRACE_DIR=/opt/libbabeltrace install-bin
  make: Entering directory `/home/acme/git/linux/tools/perf'
    BUILD:   Doing 'make -j8' parallel build
  config/Makefile:425: No libunwind found. Please install libunwind-dev[el] >= 1.1 and/or set LIBUNWIND_DIR

  Auto-detecting system features:
  ...                         dwarf: [ on  ]
  ...                         glibc: [ on  ]
  ...                          gtk2: [ on  ]
  ...                      libaudit: [ on  ]
  ...                        libbfd: [ on  ]
  ...                        libelf: [ on  ]
  ...                       libnuma: [ on  ]
  ...                       libperl: [ on  ]
  ...                     libpython: [ on  ]
  ...                      libslang: [ on  ]
  ...                     libunwind: [ OFF ]
  ...            libdw-dwarf-unwind: [ on  ]
  ...                 libbabeltrace: [ on  ]
  ...                          zlib: [ on  ]
  ...     DWARF post unwind library: libdw
  <SNIP>
  [acme@ssdandy linux]$ find tools/perf -name ".make-libbabel*.output" | grep lib | tail -5
  tools/perf/config/feature-checks/.make-libbabeltrace.output
  [acme@ssdandy linux]$ cat tools/perf/config/feature-checks/.make-libbabeltrace.output
  make[1]: Entering directory `/home/acme/git/linux/tools/perf/config/feature-checks'
  gcc -MD -I/opt/libbabeltrace/include -Wall -Werror -o test-libbabeltrace.bin test-libbabeltrace.c -Wl,-z,noexecstack -L/opt/libbabeltrace/lib -lbabeltrace-ctf # -lbabeltrace provided by
  make[1]: Leaving directory `/home/acme/git/linux/tools/perf/config/feature-checks'
  [acme@ssdandy linux]$

Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jeremie Galarneau <jgalar@efficios.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-h53xwueqwdeeiqcv9f50nqqb@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-03-12 12:39:57 -03:00
Jiri Olsa
19a9df35fe perf build: Fix libbabeltrace detection
Following patch added -Werror for feature builds:

  b49f1a4be7 perf tools: Improve feature test debuggability

and exposed a problem in the libbabeltrace feature build, because it was
including wrong header and gcc couldn't find the used symbol definition.

Adding proper header and keeping the old one as it is needed also
(libbabeltrace quirk).

Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jeremie Galarneau <jgalar@efficios.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20150310120035.GA4333@krava.redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-03-12 12:39:56 -03:00
Namhyung Kim
e578da3b20 perf probe: Allow weak symbols to be probed
It currently prevents adding probes in weak symbols.  But there're cases
that given name is an only weak symbol so that we cannot add probe.

  $ perf probe -x /usr/lib/libc.so.6 -a calloc
  Failed to find symbol calloc in /usr/lib/libc-2.21.so
    Error: Failed to add events.

  $ nm /usr/lib/libc.so.6 | grep calloc
  000000000007b1f0 t __calloc
  000000000007b1f0 T __libc_calloc
  000000000007b1f0 W calloc

This change will result in duplicate probes when strong and weak symbols
co-exist in a binary.  But I think it's not a big problem since probes
at the weak symbol will never be hit anyway.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Naohiro Aota <naota@elisp.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20150306073129.6904.41078.stgit@localhost.localdomain
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-03-12 12:39:55 -03:00
Namhyung Kim
680d926a8c perf symbols: Allow symbol alias when loading map for symbol name
When perf probe tries to add a probe in a binary using symbol name, it
sometimes failed since some symbols were discard during loading dso.

When it resolves an address to symbol, it'd be better to have just one
symbol at given address.  But for finding address from symbol, it'd be
better to keep all names (including aliases).

So allow tools to state that they want to allow aliases via
symbol_conf.allow_aliases.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Naohiro Aota <naota@elisp.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20150306073127.6904.3232.stgit@localhost.localdomain
[ Original patch passwd allow_alias to many functions, use symbol_conf.allow_aliases instead ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-03-12 12:39:54 -03:00
Masami Hiramatsu
0687eba787 Revert "perf probe: Fix to fall back to find probe point in symbols"
This reverts commit 906451b98b ("perf probe: Fix to fall back to find probe point in symbols").

Since 'perf probe' now retries with the address of given symbol searched from
map before this path, this fall back routine isn't needed anymore.

Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naohiro Aota <naota@elisp.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20150306073124.6904.1751.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-03-12 12:39:53 -03:00
Masami Hiramatsu
811dd2ae7c perf probe: Fix --line to handle aliased symbols in glibc
Fix perf probe --line to handle aliased symbols correctly in glibc.

This makes line_range search failing back to address-based alternative
search as same as --add and --vars.

Without this patch;
  -----
  # ./perf probe -x /usr/lib64/libc-2.17.so -L malloc
  Specified source line is not found.
    Error: Failed to show lines.
  -----

With this patch;
  -----
  # ./perf probe -x /usr/lib64/libc-2.17.so -L malloc
  <__libc_malloc@/usr/src/debug/glibc-2.17-c758a686/malloc/malloc.c:0>
        0  __libc_malloc(size_t bytes)
        1  {
             mstate ar_ptr;
             void *victim;

             __malloc_ptr_t (*hook) (size_t, const __malloc_ptr_t)
        6      = force_reg (__malloc_hook);
        7    if (__builtin_expect (hook != NULL, 0))
        8      return (*hook)(bytes, RETURN_ADDRESS (0));

       10    arena_lookup(ar_ptr);

       12    arena_lock(ar_ptr, bytes);
  -----

Note that this actually shows __libc_malloc, since it is the real
instance of malloc. User can use both __libc_malloc and malloc for
--line.

Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naohiro Aota <naota@elisp.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20150306073122.6904.18540.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-03-12 12:39:53 -03:00
Masami Hiramatsu
9b118acae3 perf probe: Fix to handle aliased symbols in glibc
Fix perf probe to handle aliased symbols correctly in glibc.  In the
glibc, several symbols are defined as an alias of __libc_XXX, e.g.
malloc is an alias of __libc_malloc.

In such cases, dwarf has no subroutine instances of the alias functions
(e.g. no "malloc" instance), but the map has that symbol and its
address.

Thus, if we search the alieased symbol in debuginfo, we always fail to
find it, but it is in the map.

To solve this problem, this fails back to address-based alternative
search, which searches the symbol in the map, translates its address to
alternative (correct) function name by using debuginfo, and retry to
find the alternative function point from debuginfo.

This adds fail-back process to --vars, --lines and --add options. So,
now you can use those on malloc@libc :)

Without this patch;
  -----
  # ./perf probe -x /usr/lib64/libc-2.17.so -V malloc
  Failed to find the address of malloc
    Error: Failed to show vars.
  # ./perf probe -x /usr/lib64/libc-2.17.so -a "malloc bytes"
  Probe point 'malloc' not found in debuginfo.
    Error: Failed to add events.
  -----

With this patch;
  -----
  # ./perf probe -x /usr/lib64/libc-2.17.so -V malloc
  Available variables at malloc
          @<__libc_malloc+0>
                  size_t  bytes
  # ./perf probe -x /usr/lib64/libc-2.17.so -a "malloc bytes"
  Added new event:
    probe_libc:malloc    (on malloc in /usr/lib64/libc-2.17.so with bytes)

  You can now use it in all perf tools, such as:

          perf record -e probe_libc:malloc -aR sleep 1
  -----

Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naohiro Aota <naota@elisp.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20150306073120.6904.13779.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-03-12 12:39:52 -03:00
Arnaldo Carvalho de Melo
4a6b362f36 perf ordered_events: Adopt queue() method
From perf_session, will be used in 'trace'.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-mfihndzaumx44h6y37ng2irb@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-03-12 12:39:51 -03:00
Jiri Olsa
01fbc1fee9 perf tools: Remove superfluous thread->comm_set setting
It is set by calling thread__set_comm right before the removed line.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1425396581-17716-2-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-03-12 12:39:50 -03:00
Arnaldo Carvalho de Melo
d704ebdae4 perf tools: tool->finished_round() doesn't need perf_session
It is all about flushing the ordered queue or piping it thru, no need
for a perf_session pointer.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-g47fx3ys0t9271cp0dcabjc7@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-03-12 12:39:49 -03:00
Arnaldo Carvalho de Melo
d10eb1eb76 perf ordered_events: Allow tools to specify a deliver method
So that we can simplify the deliver method to pass just:

 (ordered_events, ordered_event, sample);

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-j0s4bpxs5qza5tnkvjwom9rw@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-03-12 12:39:46 -03:00
Wenyou Yang
047794e136 ARM: at91: pm: change at91_pm_set_standby() to static
Since at91_pm_set_standby() will not be used out of the pm.c file,
change its attribute from extern to static, remove its declaration as well.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-12 15:30:38 +01:00
Boris Brezillon
936748fd34 ARM: at91: remove ksz8081 phy fixup registration for sama5d4ek board
Commit 2b0ba96cea ("net: phy: micrel: disable NAND-tree for KSZ8021,
KSZ8031, KSZ8051, KSZ8081") automated the NAND-tree mode deactivation
process, thus making this phy fixup useless.
Remove it along with the associated headers inclusion.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
[nicolas.ferre@atmel.com: remove selection of PHYLIB in at91 Kconfig]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-12 15:30:32 +01:00
Nicolas Ferre
5e7f82d730 Third fixes batch for AT91 on 4.0:
- clock fixes for USB
 - compatible string changes for handling USB IP differences
   (+ needed AHB matrix syscon)
 - fix of a compilation error in PM code
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQEcBAABAgAGBQJVAFaGAAoJEAf03oE53VmQilsH/Aie6f2WmzqtBACUTJKae3Kj
 BLXyewX89rSEDuUEjImJhYdafYDEq/5IeoeRMY/qPdXKrY0KCEhwnVUT5LEH3qy3
 P8yl0UAtZycMnKtP2YhFRAFUY/DozxprcOqTw4IfZ7PHHsQKcn4+qrgG8LcHpvfZ
 d5wv6C+6gi9UBh3B7omOx98ULFDOnST56UhOml9HGsdOgCc7AbsusEG4FzRON7Bc
 4QEJuYxxZPONoeuczpn9qF8SFk9ShO5dHQsjzWkSZjgneBPJK7vujcItR9KWWqw5
 gtjQ19BPNuAYY4MY6/2mc/qOGsA3o17Cn9CvNwaAnlvMLebk4tMAWL8Y9Dmjouc=
 =l68g
 -----END PGP SIGNATURE-----

Merge tag 'at91-fixes3' into at91-4.1-cleanup

Third fixes batch for AT91 on 4.0:
- clock fixes for USB
- compatible string changes for handling USB IP differences
  (+ needed AHB matrix syscon)
- fix of a compilation error in PM code
2015-03-12 15:30:03 +01:00
Nicolas Ferre
d14b8f390e Second fixes batch for AT91 on 4.0:
- little fix for !MMU debug: may also help for randconfig
 - fix of 2 errors in LCD clock definitions
 - in PM code, not writing the key leads to not execute the action
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQEcBAABAgAGBQJU+DZAAAoJEAf03oE53VmQe34H/3cACqt00PvJiJ/DJNOLq8xM
 1E93vZb/sQ5nD4JwF1DK1/VezT8QjOpIdb/Uo/XIKxqV0T7ZfFcLcAYHDCZup1HP
 VbNtGRYPDGtQypBBVHDgCHwfgH6QVjTQJk67vjZkKmvWXFBnv6akY2XTrXLeMBKw
 24nWEamrpR5tlEG5z9WIx6YFYBslDHq+R8j98AThJRo3NI+d00FPYwfDEwNf730e
 T4xh/Rzz9eNbttBoTP5AeN75OXowsnpZwVicbQNtkX0E2jNdv1Ltbkpzc9zWdw8m
 pL1kf+sV2MvD7KvcOrFGXMD2Ei3MCUNFdscaftQvfjutjEdmF2eIcK4qAzYRifw=
 =UTAc
 -----END PGP SIGNATURE-----

Merge tag 'at91-fixes2' into at91-4.1-cleanup

Second fixes batch for AT91 on 4.0:
- little fix for !MMU debug: may also help for randconfig
- fix of 2 errors in LCD clock definitions
- in PM code, not writing the key leads to not execute the action
2015-03-12 15:30:00 +01:00
Nicolas Ferre
37d122d7d8 First fixes batch for AT91 on 4.0:
- PM slowclock fixes for DDR and timeouts
 - fix some DT entries
 - little defconfig updates
 - the removal of a harmful watchdog option + its detailed documentation
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQEcBAABAgAGBQJU9uKaAAoJEAf03oE53VmQrT4IAID5RZZLycH65MfI2SWs5jHJ
 riXpp2ByX2YMZhBV7Y+jSJcdty0zdZFXAm3cME8YtHSHFNW87y3U90BhL1JTwFh8
 Rlk45xxauRmiH5R+0haBIavt+ZFHB8QOgmAE+xa4Vc/qBiry6HSgWVldk3yiai5j
 Mnq/+UpeL7mSlcn9kFkbVVOkDiP2tRoITU0z780tBgywbUQEluNZan4MfjSaknzP
 GEwmN74Z6QPUxhqc1Z1ACU84ozYcLYaiMksNXrTch0+dLz91MIRl6Eqb53XhJEK3
 P8ysCj16UBgX2JuuYWBGkxrZ1Brl0Lj5075JrM+He0T/XRsLTChb+9rQ14QrKno=
 =YpBm
 -----END PGP SIGNATURE-----

Merge tag 'at91-fixes' into at91-4.1-cleanup

First fixes batch for AT91 on 4.0:
- PM slowclock fixes for DDR and timeouts
- fix some DT entries
- little defconfig updates
- the removal of a harmful watchdog option + its detailed documentation
2015-03-12 15:29:56 +01:00
Eric Auger
174178fed3 KVM: arm/arm64: add irqfd support
This patch enables irqfd on arm/arm64.

Both irqfd and resamplefd are supported. Injection is implemented
in vgic.c without routing.

This patch enables CONFIG_HAVE_KVM_EVENTFD and CONFIG_HAVE_KVM_IRQFD.

KVM_CAP_IRQFD is now advertised. KVM_CAP_IRQFD_RESAMPLE capability
automatically is advertised as soon as CONFIG_HAVE_KVM_IRQFD is set.

Irqfd injection is restricted to SPI. The rationale behind not
supporting PPI irqfd injection is that any device using a PPI would
be a private-to-the-CPU device (timer for instance), so its state
would have to be context-switched along with the VCPU and would
require in-kernel wiring anyhow. It is not a relevant use case for
irqfds.

Signed-off-by: Eric Auger <eric.auger@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2015-03-12 15:15:34 +01:00
Eric Auger
649cf73994 KVM: arm/arm64: remove coarse grain dist locking at kvm_vgic_sync_hwstate
To prepare for irqfd addition, coarse grain locking is removed at
kvm_vgic_sync_hwstate level and finer grain locking is introduced in
vgic_process_maintenance only.

Signed-off-by: Eric Auger <eric.auger@linaro.org>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2015-03-12 15:15:33 +01:00
Eric Auger
c1426e4c5a KVM: arm/arm64: implement kvm_arch_intc_initialized
On arm/arm64 the VGIC is dynamically instantiated and it is useful
to expose its state, especially for irqfd setup.

This patch defines __KVM_HAVE_ARCH_INTC_INITIALIZED and
implements kvm_arch_intc_initialized.

Signed-off-by: Eric Auger <eric.auger@linaro.org>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2015-03-12 15:15:33 +01:00
Eric Auger
01c94e64f5 KVM: introduce kvm_arch_intc_initialized and use it in irqfd
Introduce __KVM_HAVE_ARCH_INTC_INITIALIZED define and
associated kvm_arch_intc_initialized function. This latter
allows to test whether the virtual interrupt controller is initialized
and ready to accept virtual IRQ injection. On some architectures,
the virtual interrupt controller is dynamically instantiated, justifying
that kind of check.

The new function can now be used by irqfd to check whether the
virtual interrupt controller is ready on KVM_IRQFD request. If not,
KVM_IRQFD returns -EAGAIN.

Signed-off-by: Eric Auger <eric.auger@linaro.org>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2015-03-12 15:15:32 +01:00
Eric Auger
df2bd1ac03 KVM: arm/arm64: unset CONFIG_HAVE_KVM_IRQCHIP
CONFIG_HAVE_KVM_IRQCHIP is needed to support IRQ routing (along
with irq_comm.c and irqchip.c usage). This is not the case for
arm/arm64 currently.

This patch unsets the flag for both arm and arm64.

Signed-off-by: Eric Auger <eric.auger@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2015-03-12 15:15:32 +01:00
Christoffer Dall
662d971584 arm/arm64: KVM: Kill CONFIG_KVM_ARM_{VGIC,TIMER}
We can definitely decide at run-time whether to use the GIC and timers
or not, and the extra code and data structures that we allocate space
for is really negligable with this config option, so I don't think it's
worth the extra complexity of always having to define stub static
inlines.  The !CONFIG_KVM_ARM_VGIC/TIMER case is pretty much an untested
code path anyway, so we're better off just getting rid of it.

Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
2015-03-12 15:15:27 +01:00
Bartosz Markowski
d7131c0457 ath10k: fix PMF by using AES-CMAC/IGTK software crypto
While testing with older supplicant, .drv_set_key() was failing due to
higher than ath10k firmware could handle key_index (WMI_MAX_KEY_INDEX == 3).

--
wpa_driver_nl80211_set_key: ifindex=15 alg=4 addr=0x7f02b129fbe3 key_idx=4 set_tx=0 seq_len=6 key_len=16
    broadcast key
nl80211: set_key failed; err=-22 Invalid argument)
wlan0: WPA: Failed to configure IGTK to the driver
wlan0: RSN: Failed to configure IGTK
--

In order to fix this case (PMF: AES-CMAC/IGTK) force the AES_CMAC cipher to
be handled by software.

Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-03-12 14:58:05 +02:00
Michal Kazior
cc9904e694 ath10k: add hw connection monitor support
Some firmware revisions (e.g. qca6174 with fw73)
don't deliver beacons to host reliably. This
causes random disconnects even in perfect
conditions. This is most visible with
multi-channel operation.

All available firmware revisions seem to support
beacon miss offloading so there shouldn't be any
problems.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-03-12 14:53:49 +02:00
Emmanuel Grumbach
208d271a3f Merge branch 'iwlwifi-fixes' into iwlwifi-next 2015-03-12 14:38:26 +02:00
Michal Kazior
c1a4654a8c ath10k: implement wmi roam event
This can be used to implement offloaded rssi
threshold, beacon miss or even automatic
in-firmware BSS roaming in the future.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-03-12 14:38:08 +02:00
Michal Kazior
7cc4573e85 ath10k: fix WPA crypto
Commit 370e567363 ("ath10k: fix broken traffic for 802.1x in client mode")
introduced a regression on WPA crypto. All keys were treated as if they were
WEP which resulted in WPA being incorrectly installed to fw/hw and subsequently
no traffic.

Reported-by: Marek Puzyniak <marek.puzyniak@tieto.com>
Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-03-12 14:35:51 +02:00
Michal Kazior
bff414c3d2 ath10k: fix CAC regression
Commit 548462133d ("ath10k: fix interrupt storm") introduced a
regression. The condition responsible for bringing up monitor vdev was broken
and it was never started for CAC so effectivelly CAC would not detect radar
pulses.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-03-12 14:30:24 +02:00
Michal Kazior
8513d95b4b ath10k: fix patching mistake for AP/IBSS CSA
Mistakenly v1 of `ath10k: fix AP/IBSS CSA with
template based fw`
(81a9a17db5) was
applied.

This patch applies the missing bits from v2:
 * remove unnecessary locking
 * add some (sanity) checks

There are no practical functionality differences
between v1 and v2.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-03-12 14:16:45 +02:00
Ian Wilson
78146572b9 netfilter: Zero the tuple in nfnl_cthelper_parse_tuple()
nfnl_cthelper_parse_tuple() is called from nfnl_cthelper_new(),
nfnl_cthelper_get() and nfnl_cthelper_del().  In each case they pass
a pointer to an nf_conntrack_tuple data structure local variable:

    struct nf_conntrack_tuple tuple;
    ...
    ret = nfnl_cthelper_parse_tuple(&tuple, tb[NFCTH_TUPLE]);

The problem is that this local variable is not initialized, and
nfnl_cthelper_parse_tuple() only initializes two fields: src.l3num and
dst.protonum.  This leaves all other fields with undefined values
based on whatever is on the stack:

    tuple->src.l3num = ntohs(nla_get_be16(tb[NFCTH_TUPLE_L3PROTONUM]));
    tuple->dst.protonum = nla_get_u8(tb[NFCTH_TUPLE_L4PROTONUM]);

The symptom observed was that when the rpc and tns helpers were added
then traffic to port 1536 was being sent to user-space.

Signed-off-by: Ian Wilson <iwilson@brocade.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2015-03-12 13:07:36 +01:00
Li, Aubrey
7486341a98 x86/platform, acpi: Bypass legacy PIC and PIT in ACPI hardware reduced mode
On a platform in ACPI Hardware-reduced mode, the legacy PIC and
PIT may not be initialized even though they may be present in
silicon. Touching these legacy components causes unexpected
results on the system.

On the Bay Trail-T(ASUS-T100) platform, touching these legacy
components blocks platform hardware low idle power state(S0ix)
during system suspend. So we should bypass them in ACPI hardware
reduced mode.

Suggested-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Li Aubrey <aubrey.li@linux.intel.com>
Cc: <alan@linux.intel.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Link: http://lkml.kernel.org/r/54FFF81C.20703@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-12 12:07:13 +01:00
Herbert Xu
f42613c665 linux-next: Tree for Mar 11 (powerpc build failure due to vmx crypto code)
crypto: vmx - Fix assembler perl to use _GLOBAL

Rather than doing things by hand for global symbols to deal with
different calling conventions we already have a macro _GLOBAL in
Linux to handle this.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tested-by: Guenter Roeck <linux@roeck-us.net>
2015-03-12 21:18:00 +11:00
Søren Andersen
ef64d3f739 dt-bindings Help for MCP ADCs
Signed-off-by: Soeren Andersen <san@rosetechnology.dk>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-03-12 10:17:41 +00:00
Søren Andersen
ab280024e3 iio: adc: Kconfig mcp320x change description Add more ADCs
Bring the Kconfig entry up to date with parts supported by
the driver.

Signed-off-by: Soeren Andersen <san@rosetechnology.dk>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-03-12 10:16:12 +00:00
Quentin Lambert
c84a083b99 Staging: dgnc: Use goto for spinlock release before return
spin_unlock_irqrestore() is called at several
different places before exiting. This patch uses a goto statement
to factorize these calls.

Coccinelle was used to generate this patch.

Signed-off-by: Quentin Lambert <lambert.quentin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-12 11:13:41 +01:00
Quentin Lambert
f6a14cf04f Staging: dgnc: Use goto for error handling
This patch introduces goto statments for error handling
and in cases where a lock needs to be released.

A simplified version of the semantic patch that finds this problem is as
follows: (http://coccinelle.lip6.fr)

@candidates exists@
identifier f, label;
statement s;
position p1, p2, p3;
@@

  f@p1(...) {
  ...when any

    if@p2(...) {
    ...when any
      s

      return@p3 ...;
    }
  ...when any
  }

@good1 exists@
identifier candidates.f, candidates.label;
statement candidates.s;
position candidates.p1, candidates.p2;
@@

  f@p1(...) {
  ...when any

    if(...) {
    ...when any
      s
      return ...;
    }
    ...when any

    if@p2(...) {...}
  ...when any
 }

@depends on good1@
identifier candidates.f, candidates.label;
position candidates.p1, candidates.p3;
@@

   f@p1(...) {
   ...when any
*  return@p3 ...;
  }

Signed-off-by: Quentin Lambert <lambert.quentin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-12 11:13:41 +01:00
Dmitry Torokhov
a308d66f14 hwrng: omap - remove #ifdefery around PM methods
Instead of using #ifdefs let's mark suspend and resume methods as
__maybe_unused which will suppress compiler warnings about them being
unused and provide better compile coverage.

Because SIMPLE_DEV_PM_OPS() produces an empty omap_rng_pm structure in
case of !CONFIG_PM_SLEEP neither omap_rng_suspend nor omap_rng_resume
will end up being referenced and the change will not result in
increasing image size.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-03-12 21:13:37 +11:00
Ard Biesheuvel
f1e866b106 crypto: arm - add support for GHASH using ARMv8 Crypto Extensions
This implements the GHASH hash algorithm (as used by the GCM AEAD
chaining mode) using the AArch32 version of the 64x64 to 128 bit
polynomial multiplication instruction (vmull.p64) that is part of
the ARMv8 Crypto Extensions.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-03-12 21:13:36 +11:00
Ard Biesheuvel
86464859cc crypto: arm - AES in ECB/CBC/CTR/XTS modes using ARMv8 Crypto Extensions
This implements the ECB, CBC, CTR and XTS asynchronous block ciphers
using the AArch32 versions of the ARMv8 Crypto Extensions for AES.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-03-12 21:13:36 +11:00
Ard Biesheuvel
006d0624fa crypto: arm - add support for SHA-224/256 using ARMv8 Crypto Extensions
This implements the SHA-224/256 secure hash algorithm using the AArch32
versions of the ARMv8 Crypto Extensions for SHA2.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-03-12 21:13:35 +11:00
Ard Biesheuvel
864cbeed4a crypto: arm - add support for SHA1 using ARMv8 Crypto Instructions
This implements the SHA1 secure hash algorithm using the AArch32
versions of the ARMv8 Crypto Extensions for SHA1.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-03-12 21:13:35 +11:00
Ard Biesheuvel
652ccae5cc crypto: arm - move ARM specific Kconfig definitions to a dedicated file
This moves all Kconfig symbols defined in crypto/Kconfig that depend
on CONFIG_ARM to a dedicated Kconfig file in arch/arm/crypto, which is
where the code that implements those features resides as well.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-03-12 21:13:35 +11:00
Lars-Peter Clausen
66454b3eb3 ASoC: rt5670: Replace w->codec snd_soc_dapm_to_codec(w->dapm)
The codec field of the snd_soc_widget struct is eventually going to be
removed, use snd_soc_dapm_to_codec(w->dapm) instead.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-12 10:12:58 +00:00
Somya Anand
64e784c457 Staging: dgnc: Remove redundant parentheses
This patch removes the redundant parentheses inorder to make code
simplified. While doing this, the precedence order of the operation
is taken into consideration to keep the logic of the code intact.

Signed-off-by: Somya Anand <somyaanand214@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-12 11:12:28 +01:00
Quentin Lambert
9f9de64c09 Staging: dgnc: dgnc_driver: Add a missing call to dgnc_tty_uninit
This function is called on the previous and the next failure branches.
This patch adds the call on the branch where it seems to be missing.

Signed-off-by: Quentin Lambert <lambert.quentin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-12 11:12:28 +01:00
Giedrius Statkevičius
1f2e089f68 dgnc: clean up comments at start of files
Remove FSF address because it's known in the past that it has changed.
Also, remove the pointless "do not change the coding style" comments
because it's one of the reasons why it's in staging and it's quite
contradictory to what it says in TODO. Also, they contain wrong e-mails
of people which are responsible for these drivers - see TODO or
MAINTAINERS for that. We can preserve the original copyright at the top
of the most files because it shows who originally made them.

Signed-off-by: Giedrius Statkevičius <giedrius.statkevicius@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-12 11:11:17 +01:00