Commit graph

534,192 commits

Author SHA1 Message Date
Philipp Zabel
58e4a668be Documentation: Add device tree bindings for Freescale i.MX GPC
The i.MX6 contains a power controller that controls power gating and
sequencing for the SoC's power domains.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-03-11 08:58:54 +08:00
Geert Uytterhoeven
46dd8a809e ARM: shmobile: lager: Add da9063 PMIC device node for system restart
Add a device node for the da9063 PMIC, with subnodes for rtc and wdt.
Regulator support is not yet included.

This allows the system to be restarted when the watchdog timer times
out, or when a system restart is requested.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-03-11 09:52:21 +09:00
Geert Uytterhoeven
ceb7747993 ARM: shmobile: lager dts: Add da9210 regulator interrupt
The da9210 regulator is connected to IRQ2. Reflect this in its device
node, so the driver can use it when it gains interrupt support.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-03-11 09:52:21 +09:00
Geert Uytterhoeven
a6b4226645 ARM: shmobile: koelsch: Add da9063 PMIC device node for system restart
Add a device node for the da9063 PMIC, with subnodes for rtc and wdt.
Regulator support is not yet included.

This allows the system to be restarted when the watchdog timer times
out, or when a system restart is requested.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-03-11 09:52:21 +09:00
Geert Uytterhoeven
4be7338df3 ARM: shmobile: koelsch dts: Add da9210 regulator interrupt
The da9210 regulator is connected to IRQ2. Reflect this in its device
node, so the driver can use it when it gains interrupt support.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-03-11 09:52:20 +09:00
Geert Uytterhoeven
663fbb5215 ARM: shmobile: R-Car Gen2: Add da9063/da9210 regulator quirk
The r8a7790/lager and r8a7791/koelsch development boards have da9063 and
da9210 regulators.  Both regulators have their interrupt request lines
tied to the same interrupt pin (IRQ2) on the SoC.

After cold boot or da9063-induced restart, both the da9063 and da9210
seem to assert their interrupt request lines.  Hence as soon as one
driver requests this irq, it gets stuck in an interrupt storm, as it
only manages to deassert its own interrupt request line, and the other
driver hasn't installed an interrupt handler yet.

To handle this, install a quirk that masks the interrupts in both the
da9063 and da9210.  This quirk has to run after the i2c master driver
has been initialized, but before the i2c slave drivers are initialized.
As it depends on i2c, select I2C if one of the affected platforms is
enabled in the kernel config.

On koelsch, the following happens:

  - Cold boot or reboot using the da9063 restart handler:

	IRQ2 is asserted, installing da9063/da9210 regulator quirk
	...
	i2c i2c-6: regulator_quirk_notify: 1, IRQC_MONITOR = 0x3fb
	i2c 6-0058: regulator_quirk_notify: 1, IRQC_MONITOR = 0x3fb
	i2c 6-0058: Detected da9063
	i2c 6-0058: Masking da9063 interrupt sources
	i2c 6-0068: regulator_quirk_notify: 1, IRQC_MONITOR = 0x3fb
	i2c 6-0068: Detected da9210
	i2c 6-0068: Masking da9210 interrupt sources
	i2c 6-0068: IRQ2 is not asserted, removing quirk

  - Warm boot (reset button):

	rcar_gen2_regulator_quirk: IRQ2 is not asserted, not installing quirk

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-03-11 09:52:12 +09:00
Linus Torvalds
cca28a5fda MTD fixes for 4.0
* pxa3xx_nand
    - fix timeout issues when draining the FIFO (BCH only)
    - don't crash when no chip-selects are used
  * hisi504_nand
    - depend on HAS_DMA, to fix compile errors
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJU/4s9AAoJEFySrpd9RFgtTp8P/AoOj+FoRZAjIcr1oRRvIj68
 gUJTihk/2caf4PzLek1mk2BMHbs3axvnyNEGyXeTkPBnM03ZSMkq0MCdCF+qpGpV
 qWnkUG3Q1SlMTkhOr1Uq28DZpkx5PVi5j859wKxw9wfkprUXb5JksX2qno+Hmfet
 +CYp+65tU/6xNeaLGtDawfxvsVXEn40hKfP7JGYfyrrbQ3jEcCuZRm19fDb+JtTg
 W8oBR08CwSoOKmpcNyltHsjlmDiF35/u0pdfIZxym1BFWyLXAsmV723MtI9J2ILG
 hEHZZwG3rxyrV/JBFl6sPlcyU6zQGmXl3rCrEoK/rxqmY00gY2x9fsqGCJOUls+u
 A6aCoIjlJ/EOuRBm+wpyEopuljZ6ybVAkdMRmiY2cIt1oOcvMtkRQzw+I+9i/fLa
 qQuhqPlEFwB63TCsi/xVwNL8VXpeBfhsSTAeE/y2ZJFuKmOym040eoENKWoEThY/
 8Nhma3sLazeSCW4vX1r5glPP0sseARo0/z9HhzjRe249VBjR7Zz60/GoF4cCXW63
 RJNXHfvxPbWvOPizT6x6HxlGcZX6dq18wgvBV46uxX2a0X3r1G3qtluyrNZHO3ab
 T2lG8Yx44uN+Bwbaxh74UB/RgvDBxeNoVf5onc+u1MhN1QU/09NfroLIY5eLEDcf
 d0+yZdOFKvYjY7pU1SFa
 =GF4t
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-20150310' of git://git.infradead.org/linux-mtd

Pull MTD fixes from Brian Norris:

 * pxa3xx_nand
   - fix timeout issues when draining the FIFO (BCH only)
   - don't crash when no chip-selects are used

 * hisi504_nand
   - depend on HAS_DMA, to fix compile errors

* tag 'for-linus-20150310' of git://git.infradead.org/linux-mtd:
  mtd: nand: MTD_NAND_HISI504 should depend on HAS_DMA
  mtd: pxa3xx_nand: fix driver when num_cs is 0
  mtd: nand: pxa3xx: Fix PIO FIFO draining
2015-03-10 17:44:34 -07:00
Kuninori Morimoto
63573339e7 ARM: shmobile: r8a7791: sound enables Audio DMAC entry on DTSI
This patch adds Audio DMAC (= rcar-dmac) entry for sound

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-03-11 09:40:30 +09:00
Kuninori Morimoto
118a509374 ARM: shmobile: r8a7790: sound enables Audio DMAC entry on DTSI
This patch adds Audio DMAC (= rcar-dmac) entry for sound

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-03-11 09:40:30 +09:00
Kuninori Morimoto
d73a5013ed ARM: shmobile: r8a7791: enable Audio DMAC peri peri via sound driver
Audio DMAC peri peri is no longer DMAEngine. it is supported by
sound driver. this patch enable it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-03-11 09:40:30 +09:00
Kuninori Morimoto
0c60267702 ARM: shmobile: r8a7790: enable Audio DMAC peri peri via sound driver
Audio DMAC peri peri is no longer DMAEngine. it is supported by
sound driver. this patch enable it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-03-11 09:40:30 +09:00
Kuninori Morimoto
d88a6a2a21 ARM: shmobile: r8a7791: add reg-names for sound
Rensas R-Car sound driver supports reg-names.
Let's use it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-03-11 09:40:30 +09:00
Kuninori Morimoto
46a158f2ce ARM: shmobile: r8a7790: add reg-names for sound
Rensas R-Car sound driver supports reg-names.
Let's use it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-03-11 09:40:30 +09:00
Linus Torvalds
9c3e1323ec IOMMU Fixes for Linux v4.0-rc3
The patches contain:
 
 	* Fix multiple ARM IOMMU drivers to behave well when the
 	  hardware is not present
 
 	* Mark MSM driver as broken
 
 	* Fix build errors with the new ARM generic io-page-table code
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJU/zbaAAoJECvwRC2XARrjZFsP/2rZAiDJ1NGBOoJO+v+QlEY/
 //wxpyKWnJ977vkgIAVvBZqWLFbwO8UF3jnRlfF4nrpbkbRynB62kczov9G/3Mzo
 kur1gT472xYSTd87yGfBKl9hfIn5GQpe8BFX3UU9SkkSR11z7iDBb6X7LevmeyqB
 B24WgzX0haKCSYMj5/jd1iskzI1KomhoLLUrh5+vmDHj12P9B2TmCuK/6hZOBtQI
 GSCvrje3FWHdymCfGym2QZmwQIdm6ZlvzSBuTLp8F3PUKbf7hVvpszCbMRJ/ZYCl
 gDvn0mDXyi14heEeXzHVF6574Sd1UBfxRWpgmDQpDRUAREzt3NW+FUbwMQg1XnzD
 nN8ft1QCjhzK2elb0rsp6ZN4tkLEGZMU/EgUfnrLvt9/yhhOzwN7u2tDIXpM5dwW
 KsgX/cKQssH8tJBfRy8YyXmb6ez9nV3yo0byHUCrC5YlCYrSGEpSe9mMstO5/Zo7
 UFL0OPdbscdU1H2kYTA8YA1RywmUM/icn8mTrh/B2qkhxwusEJeqj4UOmtM3oiwF
 RuUp3hfeYYuDaDIiAsJ0yaaSMdmQ2LummJClYJOVVOSAKacLWwG4HkyBLSrMIiol
 H30cUEtGGnSbrptnYAI5M3gVFuNj1kTVjSw2ccc3EaEiAC7/iOPk4ho52ItEAkpT
 ZGCBV1jtJ51RNeOh8r66
 =dL5c
 -----END PGP SIGNATURE-----

Merge tag 'iommu-fixes-v4.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu

Pull iommu fixes from Joerg Roedel:
 "The patches contain:

   - fix multiple ARM IOMMU drivers to behave well when the hardware is
     not present

   - mark MSM driver as broken

   - fix build errors with the new ARM generic io-page-table code"

* tag 'iommu-fixes-v4.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/io-pgtable-arm: Add built time dependency
  iommu/msm: Mark driver BROKEN
  iommu/rockchip: Play nice in multi-platform builds
  iommu/omap: Play nice in multi-platform builds
  iommu/exynos: Play nice in multi-platform builds
  iommu/io-pgtable-arm: Fix self-test WARNs on i386
2015-03-10 17:36:19 -07:00
Paolo Bonzini
dc9be0fac7 kvm: move advertising of KVM_CAP_IRQFD to common code
POWER supports irqfds but forgot to advertise them.  Some userspace does
not check for the capability, but others check it---thus they work on
x86 and s390 but not POWER.

To avoid that other architectures in the future make the same mistake, let
common code handle KVM_CAP_IRQFD the same way as KVM_CAP_IRQFD_RESAMPLE.

Reported-and-tested-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org
Fixes: 297e21053a
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2015-03-10 21:18:59 -03:00
David Kaplan
dab429a798 kvm: svm: make wbinvd faster
No need to re-decode WBINVD since we know what it is from the intercept.

Signed-off-by: David Kaplan <David.Kaplan@amd.com>
[extracted from larger unlrelated patch, forward ported, tested,style cleanup]
Signed-off-by: Joel Schopp <joel.schopp@amd.com>
Reviewed-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2015-03-10 20:31:25 -03:00
Joel Schopp
5cb56059c9 kvm: x86: make kvm_emulate_* consistant
Currently kvm_emulate() skips the instruction but kvm_emulate_* sometimes
don't.  The end reult is the caller ends up doing the skip themselves.
Let's make them consistant.

Signed-off-by: Joel Schopp <joel.schopp@amd.com>
Reviewed-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2015-03-10 20:29:15 -03:00
Jon Paul Maloy
169bf9121b tipc: ensure that idle links are deleted when a bearer is disabled
commit afaa3f65f6
(tipc: purge links when bearer is disabled) was an attempt to resolve
a problem that turned out to have a more profound reason.

When we disable a bearer, we delete all its pertaining links if
there is no other bearer to perform failover to, or if the module
is shutting down. In case there are dual bearers, we wait with
deleting links until the failover procedure is finished.

However, this misses the case when a link on the removed bearer
was already down, so that there will be no failover procedure to
finish the link delete. This causes confusion if a new bearer is
added to replace the removed one, and also entails a small memory
leak.

This commit takes the current state of the link into account when
deciding when to delete it, and also reverses the above-mentioned
commit.

Reviewed-by: Erik Hugne <erik.hugne@ericsson.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-10 18:37:36 -04:00
Alexander Duyck
ddb4b9a132 fib_trie: Address possible NULL pointer dereference in resize
If the inflate call failed it would return NULL.  As a result tp would be
set to NULL and cause use to trigger a NULL pointer dereference in
should_halve if the inflate failed on the first attempt.

In order to prevent this we should decrement max_work before we actually
attempt to inflate as this will force us to exit before attempting to halve
a node we should have inflated.  In order to keep things symmetric between
inflate and halve I went ahead and also moved the decrement of max_work for
the halve case as well so we take care of that before we actually attempt
to halve the tnode.

Fixes: 88bae714 ("fib_trie: Add key vector to root, return parent key_vector in resize")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-10 18:36:56 -04:00
Stephen Rothwell
416377ea39 macb: Fix merge error.
The code removed by commit 421d9df062 ("net/macb: merge
at91_ether driver into macb driver") should be removed
in the merge resolution as well.

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-10 18:33:49 -04:00
David Dueck
d0f347d628 usb: phy: am335x-control: check return value of bus_find_device
This fixes a potential null pointer dereference.

Cc: <stable@vger.kernel.org> # v3.16+
Fixes: d433201391 ("driver core: dev_get_drvdata: Don't check for NULL dev")
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David Dueck <davidcdueck@googlemail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-03-10 16:28:44 -05:00
Greg Kroah-Hartman
e74ac55029 Staging: sm750fb: provide error path for hw_sm750le_setBLANK()
This provides a default path for the switch statement in
hw_sm750le_setBLANK() so that the compiler will not correctly complain
about undefined values being sent to the hardware.

Instead, properly error out if the blank command is unknown by the
driver.

Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: Teddy Wang <teddy.wang@siliconmotion.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-10 22:08:38 +01:00
Greg Kroah-Hartman
7c6f3fdc48 Staging: sm750fb: fix hw_imageblit parameters
Fix up hw_imageblit() so that the function paramaters match up with what
the driver expects them to be when using it as a function pointer.

Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: Teddy Wang <teddy.wang@siliconmotion.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-10 22:03:01 +01:00
Adrian Remonda
30061915be spi: spidev_test: Added input buffer from the terminal
Signed-off-by: Adrian Remonda <adrianremonda@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-10 20:51:11 +00:00
Adrian Remonda
31a5c5a72b spi: spidev_test: Added verbose output
Signed-off-by: Adrian Remonda <adrianremonda@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-10 20:51:04 +00:00
Adrian Remonda
b78ce7ed54 spi: spidev_test: Cleaned hexadecimal dump
Signed-off-by: Adrian Remonda <adrianremonda@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-10 20:49:21 +00:00
Yunzhi Li
509d612b2f usb: dwc2: host: fix dwc2 disconnect bug
When dwc2 controller detects a disconnect interrupt,
dwc2_hcd_disconnect() should be called immediately to do clean-up
jobs and set port_connect_status_change flag to notify usb hub
driver disconnect status.

Tested-by: Vincent Palatin <vpalatin@chromium.org>
Acked-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Yunzhi Li <lyz@rock-chips.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-03-10 15:48:29 -05:00
Johan Hedberg
55e76b3898 Bluetooth: Add 'Already Paired' error for Pair Device command
To make the behavior predictable when attempting to pair with a device
for which we already have a Link Key or Long Term Key, this patch adds a
new 'Already Paired' error which gets sent in such a scenario.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-03-10 21:42:05 +01:00
Jin Yao
8d0c38a3f2 ASoC: Intel: move sysclk source setting to platform_clock_control for balance.
A playback noise happens after suspend/resume on Braswell. The issue is due to
the codec PLL and codec ASRC are not enabled correctly due to the incorrect
sysclk setting after resume. This patch resets the sysclk source setting in
platform clock control widget handler.

Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-10 20:40:51 +00:00
Andrzej Pietrasiewicz
ee1cd515e8 usb: gadget: printer: add configfs support
Add support for configfs interface so that f_printer can be used as a
component of usb gadgets composed with it.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-03-10 15:33:41 -05:00
Andrzej Pietrasiewicz
a2a8e48a94 usb: gadget: printer: use module_usb_composite_driver helper macro
Substitute some boilerplate code with a dedicated macro.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-03-10 15:33:41 -05:00
Andrzej Pietrasiewicz
d85dc4824c usb: gadget: f_printer: remove compatibility layer
There are no old interface users left, so it can be removed.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-03-10 15:33:41 -05:00
Andrzej Pietrasiewicz
69504f808d usb: gadget: printer: convert to new interface of f_printer
The goal is to remove the old function interface, so its (only) user
must be converted to the new interface.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-03-10 15:33:40 -05:00
Andrzej Pietrasiewicz
b26394bd56 usb: gadget: f_printer: convert to new function interface with backward compatibility
In order to add configfs support, a usb function must be converted to use
the new interface. This patch converts the function to the new interface
and provides backward compatiblity layer, which can be removed after
all its users are converted to use the new interface.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-03-10 15:33:40 -05:00
Andrzej Pietrasiewicz
b185f01a9a usb: gadget: printer: factor out f_printer
The legacy printer gadget now contains both a reusable printer function
and legacy gadget proper implementations interwoven, but logically
separate. This patch factors out a reusable f_printer.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-03-10 15:33:40 -05:00
Andrzej Pietrasiewicz
6dd8c2e695 usb: gadget: printer: allocate printer_dev instances dynamically
With all the obstacles removed it is possible to allow more than one
instance of the printer function. Since the function requires allocating
character device region, a maximum number of allowed instances is defined.
Such an approach is used in f_acm and in f_hid.
With multiple instances it does not make sense to depend on a
lock_printer_io member of a dynamically allocated (and destroyed) struct
printer_dev to clean up after all instances of the printer function.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-03-10 15:33:39 -05:00
Andrzej Pietrasiewicz
636bc0ed27 usb: gadget: printer: add req_match for printer function
Verify that a given usb_ctrlrequest is meant for printer function.
The following parts of the request are tested:

- bmRequestType:Data transfer direction
- bmRequestType:Type
- bmRequestType:Recipient
- bRequest
- wValue for bRequest 1 and 2
- wLength

Additionally, the request is considered meant for this function
iff the decoded interface number matches dev->interface.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-03-10 15:33:39 -05:00
Andrzej Pietrasiewicz
d7239f4c6d usb: gadget: printer: name class specific requests
Avoid using magic numbers.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-03-10 15:33:39 -05:00
Andrzej Pietrasiewicz
f563d23090 usb: gadget: composite: add req_match method to usb_function
Non-standard requests can encode the actual interface number in a
non-standard way. For example composite_setup() assumes
that it is w_index && 0xFF, but the printer function encodes the interface
number in a context-dependet way (either w_index or w_index >> 8).
This can lead to such requests being directed to wrong functions.

This patch adds req_match() method to usb_function. Its purpose is to
verify that a given request can be handled by a given function.
If any function within a configuration provides the method and it returns
true, then it is assumed that the right function is found.

If a function uses req_match(), it should try as hard as possible to
determine if the request is meant for it.

If no functions in a configuration provide req_match or none of them
returns true, then fall back to the usual approach.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-03-10 15:33:39 -05:00
Andrzej Pietrasiewicz
143d53e10e usb: gadget: printer: add container_of helper for printer_dev
5 uses of container_of() in the same context justify wrapping it
in a static inline function.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-03-10 15:33:38 -05:00
Andrzej Pietrasiewicz
8fe20f661f usb: gadget: printer: don't access file global usb_printer_gadget in function's code
The printer_dev can be recovered from printer_func_unbind() function's
parameters.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-03-10 15:33:38 -05:00
Andrzej Pietrasiewicz
dec81cf1dc usb: gadget: printer: eliminate file global printer_mutex
The mutex is a legacy after semi-automatic Big Kernel Lock removal.
printer_open() does its own locking, so no need to duplicate it.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-03-10 15:33:38 -05:00
Andrzej Pietrasiewicz
a844715d2f usb: gadget: printer: call gprinter_setup() from gadget's bind
Call gprinter_setup() from gadget's bind instead of module's init.
Call gprinter_cleaup() corerspondingly. This detaches printer function's
logic from legacy printer gadget's implementation.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-03-10 15:33:37 -05:00
Andrzej Pietrasiewicz
d82cd82edb usb: gadget: printer: add setup and cleanup functions
Factor out gprinter_setup() and gprinter_cleanup() so that it is
easy to change the place they are called from.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-03-10 15:33:37 -05:00
Andrzej Pietrasiewicz
5a84e6f608 usb: gadget: printer: don't access file global pnp_string in function's code
In order to factor out a reusable f_printer, the function's code should
not use file global variables related to legacy printer gadget's
implementation.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-03-10 15:33:37 -05:00
Andrzej Pietrasiewicz
085617a1eb usb: gadget: printer: define pnp string buffer length
Avoid using magic numbers.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-03-10 15:33:37 -05:00
Andrzej Pietrasiewicz
991cd26249 usb: gadget: printer: move function-related unbind code to function's unbind
In order to factor out a reusable f_printer.c, the code related to the
function should be placed in functions related to the function.

printer_cfg_unbind() becomes empty, so it is removed.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-03-10 15:33:36 -05:00
Andrzej Pietrasiewicz
cee5cbff8d usb: gadget: printer: call usb_add_function() last
Conversion to the new function interface requires splitting a
<something>_bind_config() function into two parts: allocation of
container_of struct usb_function and invocation of usb_add_function().
This patch moves the latter to the end of the f_printer_bind_config()
in order to enable conversion to the new interface.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-03-10 15:33:36 -05:00
Andrzej Pietrasiewicz
4504b5a0b2 usb: gadget: printer: move function-related bind code to function's bind
In order to factor out a reusable f_printer.c, the code related to the
function should be placed in functions related to the function.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-03-10 15:33:36 -05:00
Andrzej Pietrasiewicz
ae2dd0de57 usb: gadget: printer: standardize printer_do_config
Follow the convention of distributing source code between
<something>_do_config() and <something>_bind_config().

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-03-10 15:33:35 -05:00