Commit graph

534,192 commits

Author SHA1 Message Date
Bard Liao
bd22f9d405 ASoC: rt5670: Revert Keep sysclk on patch
The "Keep sysclk on if JD func is used" patch force enable/disable
pin in rt5670_set_dai_sysclk. But some machine driver call it in
dapm widget event. It will cause kernel crash.

Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-09 18:12:48 +00:00
Andy Shevchenko
d744f82683 spi: dw-mid: convert to use dw_dmac instead of intel_mid_dma
intel_mid_dma seems to be unmaintained for a long time. Moreover, the IP block
of DMA itself is the same in both dw_dmac and intel_mid_dma. This patch moves
spi-dw-midpci to use dw_dmac driver.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-09 18:11:13 +00:00
Andy Shevchenko
f89a6d8f43 spi: dw-mid: move to use core SPI DMA mappings
SPI core has a comprehensive function set to map and unmap a message when it's
needed. This patch converts driver to use that advantage.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-09 18:11:13 +00:00
Andy Shevchenko
4d5ac1edfd spi: dw-mid: clear ongoing DMA transfers on timeout
This patch shuts up any ongoing DMA transfer in case of error.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-09 18:11:13 +00:00
Andy Shevchenko
f051fc8f11 spi: dw-mid: take care of FIFO overrun/underrun when do DMA
In according to documentation SPI in DMA mode may encounter underrun/overrun
failures in rare cases. When such failure occurs, an error recovery protocol is
expected to be implemented in the device driver so that the failed transaction
can be restarted.

This patch enables FIFO overrun / underrun interrupts in DMA case and adds a
handler for that.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-09 18:11:13 +00:00
Andy Shevchenko
9f14538ecd spi: dw-mid: split dma_setup() from dma_transfer()
The patch splits DMA preparatory code to dma_setup() callback. The change also
converts transfer_one() to program DMA whenever the transfer is DMA mapped. The
change is a follow up of the converion to use SPI core transfer_one_message().
Since the DMA mapped transfers can be interleaved with PIO ones the DMA related
configuration should respect that.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-09 18:11:13 +00:00
Andy Shevchenko
e31abce778 spi: dw-mid: convert value of dma_width to enum dma_slave_buswidth
DMAEngine has a specific type to be used for bus width. This patch converts the
code to use the values of the specific type when configure DMA transfer.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-09 18:11:13 +00:00
Mark Brown
0365fbd4bb Merge branch 'fix/dw' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi into spi-dw 2015-03-09 18:11:06 +00:00
Zubair Lutfullah Kakakhel
967beb2e87 ASoC: jz4740: Add jz4780 support
The jz4780 and jz4740 have very similar i2s blocks.

The slight difference is in Rx/Tx fifos.
And the bitclocks for input/output are different.

This patch adds jz4780 support to the driver

Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-09 18:10:17 +00:00
Michal Simek
38b6484e5b spi: cadence: Remove Kconfig dependency
Remove Kconfig dependency and enable driver for
all ARCHs.
Also update help description.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Sören Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-09 18:09:30 +00:00
Mitch A Williams
b29e13bb91 i40e: add ethtool RSS support
Add support for setting the RSS hash table and hash key through ethtool.
This patch incorporates suggestions from Ben Hutchings
<ben.hutchings@codethink.co.uk>.

Reported-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-03-09 10:53:37 -07:00
Catherine Sullivan
ec7a06fd6d i40e/i40evf: Bump i40e/i40evf version
Bump PF version to 1.2.37 and VF version to 1.2.25

Change-ID: I0287a750408250dc055c03e1f744fd5f0caefd68
Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com>
Tested-by: Jim Young <james.m.young@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-03-09 10:53:26 -07:00
Shannon Nelson
2ddb80c9c4 i40e: add MAC printing to debugfs dump VSI
Print the LAN, SAN, and Port MACs for the VSI if debugfs command
dump VSI is used on the PF's VSI.

Example output:
[260221.871244] i40e 0000:04:00.0: MAC address: 68:05:ca:26:15:e0 SAN MAC: 00:00:00:00:02:00 Port MAC: 68:05:ca:26:15:e3

Change-ID: I0b393113dfb5ee7ff4f9e5227e4177885f0cc15e
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-03-09 10:53:19 -07:00
Grygorii Strashko
878ce05894 gpio: omap: irq_shutdown: remove unnecessary call of gpiochip_unlock_as_irq
GPIOLib core implemnts irqchip->irq_request/release_resources callbacks
internally and these callbacks already contain clalls of
gpiochip_lock/unlock_as_irq().

Hence, remove unnecessary call of gpiochip_unlock_as_irq() from
omap_gpio_irq_shutdown().

Signed-off-by: Grygorii Strashko <grygorii.strashko@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-09 18:28:53 +01:00
Roberta Dobrescu
3fca6a2f46 tools: iio: lsiio: Remove unused variables
This patch removes unused variables from lsiio.c in order
to get rid of the warnings regarding them.

Signed-off-by: Roberta Dobrescu <roberta.dobrescu@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-03-09 17:18:25 +00:00
Roberta Dobrescu
976d9ab112 tools: iio: Define _GNU_SOURCE in Makefile
Definition of _GNU_SOURCE is needed to get rid of some warnings, such
as:
warning: implicit declaration of function `asprintf'.

generic_buffer.c and iio_event_monitor.c define _GNU_SOURCE,
but it is also needed in lsiio.c and iio_utils.c. For this reason,
this patch adds the definition in Makefile and removes it from where
it already exists.

Signed-off-by: Roberta Dobrescu <roberta.dobrescu@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-03-09 17:17:26 +00:00
Roberta Dobrescu
817020cfb3 iio: Move iio userspace applications out of staging
This patch moves iio userspace applications out of staging, to tools/iio/
and adds a Makefile in order to compile them easily. It also adds tools/iio/
to MAINTAINERS file.

Signed-off-by: Roberta Dobrescu <roberta.dobrescu@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-03-09 17:16:08 +00:00
Roberta Dobrescu
bdcb31d048 staging: iio: Documentation: Introduce iio_utils.c
This patch removes inline functions from iio_utils.h in order to clean the
code. iio_utils.c contains the implementation of the functions used by
iio_event_monitor.c, lsiio.c or generic_buffer.c and iio_utils.h contains
the declarations of these functions.

Since iio_utils.h is modified, generic_buffer.c and iio_event_monitor.c
must include stdlib.h.

Signed-off-by: Roberta Dobrescu <roberta.dobrescu@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-03-09 17:14:33 +00:00
Roberta Dobrescu
95763859c0 staging: iio: Documentation: iio_event_monitor: Include linux/iio/types.h
By adding this line and installing the kernel headers with
make headers_install, iio_event_monitor can be compiled without
any hacks.

Signed-off-by: Roberta Dobrescu <roberta.dobrescu@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-03-09 17:11:49 +00:00
Stanimir Varbanov
407f5e392f pinctrl: qcom: handle input-enable pinconf property
This enables support of 'input-enable' pinconf generic property in
the pinctrl driver.

Signed-off-by: Stanimir Varbanov <svarbanov@mm-sol.com>
Acked-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-09 18:11:01 +01:00
Stanimir Varbanov
38d756af72 pinctrl: qcom: enable generic pinconf
This makes the pinctrl driver to use the generic pinconf
interface. Mainly it gives us a way to use debugfs to dump
group configurations.

Signed-off-by: Stanimir Varbanov <svarbanov@mm-sol.com>
Acked-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-09 18:11:01 +01:00
Baruch Siach
11131ba435 pinctrl: at91: simplify probe error handling
There is no code ender the 'err' label. Just return the error code directly.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-09 18:11:00 +01:00
Baruch Siach
939417bd8b pinctrl: remove maxpin from documentation
struct pinctrl_desc does not contain the maxpin member since commit 0d2006bbf0
(pinctrl: remove unnecessary max pin number).

Fixes: 0d2006bbf0 ('pinctrl: remove unnecessary max pin number')
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-09 18:11:00 +01:00
Colin Ian King
28b30c306a pinctrl: sirf: fix typo in kernel warning on a bad interrupt
Fix typo, "flaged" -> "flagged"

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-09 18:10:59 +01:00
Stephen Warren
9184f75690 pinctrl: tegra: add a driver for Tegra210
Tegra210's pinmux supports a different set of pins/options than earlier
SoCs, so requires its own driver (well, table of pin-specific data).

Cc: devicetree@vger.kernel.org
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Tested-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-09 18:10:59 +01:00
Stephen Warren
ec654e50c6 pinctrl: tegra: support nvidia,io-hv DT property
Both nvidia,io-hv and nvidia,rcv-sel represent the fact that a particular
pin's IO buffers are configured to accept "high voltage" input signals.
The TRM for different chips names the register field rcv-sel on older
SoCs and io_hv on newer SoCs. Add the new naming option into the pinctrl
driver so that DT files can use naming consistent with the TRM.

This new property name will be documented in the patch that adds support
for the new SoC.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Tested-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-09 18:10:58 +01:00
Stephen Warren
ea62306193 pinctrl: tegra: some bits move between registers
Some of the pinmux configuration bits that exist in "drive group"
registers in Tegra30..Tegra124 move to the "pinmux" registers on future
chips. Add a flag to support this.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Tested-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-09 18:10:58 +01:00
Stephen Warren
8d4684b39b pinctrl: tegra: driver layout/consistency fixes
Various non-semantic tweaks and layout/consistency fixes for existing
Tegra pinctrl drivers.

Move the definition of DRV_PINGROUP_REG() before the definition of
PINGROUP() so that a future SoC driver can invoke the former from the
latter.

PINGROUP_BIT_Y(n) is just n, so replace it with n.

Re-wrap the parameters to *PINGROUP().

Keep various enums sorted in the Tegra124 driver.

Various white-space consistency fixes.

These changes aim to update existing drivers to be consistent with future
SoC drivers. While we could ignore these tweaks to the existing drivers,
I'd like to keep everything as consistent as possible for easy comparison.
Besides, I auto-generate the drivers, and maintaining special-cases to
keep the differences in place is annoying.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Tested-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-09 18:10:57 +01:00
Baruch Siach
b5eec4d061 pinctrl: lantiq: fix include guard #endif comment
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-09 18:10:57 +01:00
Thomas Petazzoni
af03361235 devicetree: bindings: add Device Tree bindings for Armada 39x pin-muxing controller
This commit adds the Device Tree binding documentation to describe the
pin-muxing controller of the Marvell Armada 39x processors. Two
variants are supported for the moment: the 88F6920 (Armada 390) and
88F6928 (Armada 398).

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-09 18:10:57 +01:00
Sanjeev Sharma
ace16867fa pinctrl: freescale: make of_device_id array const
Make of_device_id array const.

Signed-off-by: Sanjeev Sharma <Sanjeev_Sharma@mentor.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-09 18:10:56 +01:00
Geert Uytterhoeven
05c5f265c6 pinctrl: sh-pfc: Do not overwrite bias configuration
After the last user of the in_pd/in_pu bias parameters of the _PCRH()
macro was removed in commit 80da8e02d2 ("sh-pfc: r8a7740: Add bias
(pull-up/down) pinconf support"), bias parameters are supposed to be
configured using the generic pinctl mechanism, which calls the
.set_bias() method.

However, the PORTCR() macro still represents the control register as
consisting of two 4-bit fields. Hence the bias configuration in the
uppermost 2 bits is always overwritten with zeroes when a pin is
configured for GPIO, disabling any previously configured bias.

Use the variable config register macro instead, to represent the
register as having 4 fields, and to make sure only the input/output
control and function fields are touched.

This affects R-Mobile APE6 (r8a73a4), R-Mobile A1 (r8a7740), SH-Mobile
AP4 (sh7372), and SH-Mobile AG5 (sh73a0).

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-09 18:10:56 +01:00
Laurent Pinchart
eaef1279fa pinctrl: sh-pfc: Remove r8a7791 platform_device_id entry
The r8a7791 platform is now DT-only, the driver doesn't need to match
platform devices by name anymore. Remove the corresponding
platform_device_id entry.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-09 18:10:55 +01:00
Randy Dunlap
18fd303fea hwmon: (pwm-fan) Fix build when THERMAL=m
Fix build errors when CONFIG_THERMAL=m and SENSORS_PWM_FAN=y
by restricting SENSORS_PWM_FAN to 'm' when THERMAL=m.

drivers/built-in.o: In function `pwm_fan_remove':
pwm-fan.c:(.text+0x22ba58): undefined reference to `thermal_cooling_device_unregister'
drivers/built-in.o: In function `pwm_fan_probe':
pwm-fan.c:(.text+0x22bebb): undefined reference to `thermal_of_cooling_device_register'
pwm-fan.c:(.text+0x22bf11): undefined reference to `thermal_cdev_update'

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-03-09 09:59:36 -07:00
Guenter Roeck
de52b049d6 hwmon: (pwm-fan) Declare pwm_fan_of_get_cooling_data static
Address the following sparse warnings.

drivers/hwmon/pwm-fan.c:176:5: warning:
	symbol 'pwm_fan_of_get_cooling_data' was not declared. Should it be static?
drivers/hwmon/pwm-fan.c:176:5: warning:
	no previous prototype for 'pwm_fan_of_get_cooling_data'

pwm_fan_of_get_cooling_data is only used in the pwm-fan driver and thus should
be declared static.

Cc: Lukasz Majewski <l.majewski@samsung.com>
Acked-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-03-09 09:59:36 -07:00
Nishanth Menon
b5cf88e46b (gpio-fan): Add thermal control hooks
Allow gpio-fan to be used as thermal cooling device for platforms that
use GPIO maps to control fans.

As part of this change, we make the shutdown and remove logic the same
as well.

Signed-off-by: Nishanth Menon <nm@ti.com>
Acked-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-03-09 09:59:36 -07:00
Lukasz Majewski
b6bddec019 hwmon: (pwm-fan) Add support for using PWM FAN as a cooling device
The PWM FAN device can now be used as a thermal cooling device.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Acked-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-03-09 09:59:36 -07:00
Lukasz Majewski
2e5219c771 hwmon: (pwm-fan) Read PWM FAN configuration from device tree
This patch provides code for reading PWM FAN configuration data via
device tree. The pwm-fan can work with full speed when configuration
is not provided. However, errors are propagated when wrong DT bindings
are found.
Additionally the struct pwm_fan_ctx has been extended.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-03-09 09:59:36 -07:00
Lukasz Majewski
cb85ca332f hwmon: (pwm-fan) Extract __set_pwm() function to only modify PWM duty cycle
It was necessary to decouple code handling writing to sysfs from the one
responsible for setting PWM of the fan.
Due to that, new __set_pwm() method was extracted, which is responsible for
only setting new PWM duty cycle.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-03-09 09:59:36 -07:00
Simon Guinot
73ef85f42d hwmon: (gpio-fan) allow to use alarm support alone from DT
On some boards, such as the LaCie 2Big Network v2 or 2Big NAS (based on
Marvell Kirkwood SoCs), an I2C fan controller is used but the alarm
signal is wired to a separate GPIO. Unfortunately, the gpio-fan driver
can't be used to handle GPIO alarm alone from DT: an error is returned
if the "gpios" DT property is missing.

This patch allows to use the gpio-fan driver even if the "alarm-gpios"
DT property is defined alone.

Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-03-09 09:59:36 -07:00
Guenter Roeck
6552f327ca hwmon: (nct7904) Strengthen detect function
The bank register has five unused bits. Verify that those bits are zero
to strengthen the detect function.

Cc: Vadim V. Vlasov <vvlasov@dev.rtsoft.ru>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
2015-03-09 09:59:36 -07:00
Vadim V. Vlasov
9c947d25c9 hwmon: Add Nuvoton NCT7904 hwmon driver
The NCT7904D is a hardware monitor supporting up to 20 voltage sensors,
internal temperature sensor, Intel PECI and AMD SB-TSI CPU temperature
interface, up to 12 fan tachometer inputs, up to 4 fan control channels
with SmartFan.

Signed-off-by: Vadim V. Vlasov <vvlasov@dev.rtsoft.ru>
[Guenter Roeck: Fixed whitespace errors, dropped redundant comment]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-03-09 09:59:36 -07:00
Guenter Roeck
e8433b42b6 hwmon: (it87) No need to skip fan4 for IT8603
IT8603 only supports three fans, so it is not necessary to skip fan4.

Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-03-09 09:59:36 -07:00
Thomas Lorblanches
a0c1424acb hwmon: (it87) Add support for IT8786E
IT8786E is mostly compatible with IT8771 / IT8772.
Parameters determined by testing various combinations.

Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Thomas Lorblanches <zlika_ese@hotmail.com>
[Guenter Roeck: merged from github, addressed review comments]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-03-09 09:59:36 -07:00
Guenter Roeck
32dd7c409d hwmon: (it87) Add feature flag for VID support
Newer chips don't typically support VID inputs or control.
Add a feature flag for VID support to simplify adding support for
new chips.

Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-03-09 09:59:36 -07:00
Guenter Roeck
9faf28ca4b hwmon: (it87) Add feature flags for fans count and 16-bit fan configuration
Fans 4-5 are not supported on all chips and revisions. Also, 16-bit fan
counters are always enabled on some chips. Provide feature flags to
simplify adding support for new chips.

Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-03-09 09:59:35 -07:00
Guenter Roeck
fd044868e8 hwmon: (it87) Don't configure 16 bit fan counters it not necessary
On IT8728F, IT8771E, and IT8772E, fans counters are always 16 bit
and don't need to be configured for it.

Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-03-09 09:59:35 -07:00
Guenter Roeck
0ea2f1db8e hwmon: (jc42) Add support for additional IDT temperature sensors
TS3000GB0 has a new device ID (0x2913). Since IDT's datasheets suggest
that the upper 8 bit of the device ID reflect the chip ID and the lower
8 bit reflect the version number, modify the code to accept all chips
with ID 0x29xx.

Also add support for TS3001 and TSE2004.

Some of the datasheets for older chips are no longer available from
the IDT web site, so replace explicit links in the documentation with
a generic note.

Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-03-09 09:59:35 -07:00
Guenter Roeck
7bc32d298b hwmon: (it87) Add support for IT8781F
IT8781F is mostly compatible to IT8782F. Major difference is that it only
supports four instead of six UART channels, and therefore does not share
the uart6 pins.

Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-03-09 09:59:35 -07:00
Rasmus Villemoes
a0fc74d42d hwmon: (ibmpex) Allow format string checking
The only difference between the three power_sensor_name_templates is
whether there is a suffix of "", "_lowest" or "_highest". We might as
well pull those into an array and use a literal format string,
allowing gcc to do type checking of the arguments to
sprintf. Incidentially, the same three suffixes are used in the
temp_sensor_name_templates case, so we end up eliminating one static
array.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
[Guenter Roeck: Fixed line length over 80 characters]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-03-09 09:59:35 -07:00