Commit graph

534,192 commits

Author SHA1 Message Date
Maxime Ripard
68c062eaa8 dmaengine: Remove net_dma leftovers
Commit 7bce d397 510a ("net_dma: simple removal") removed the net_dma support
entirely but left some functions and prototypes in the dmaengine header.
Remove them.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-03-05 21:46:48 +05:30
Stanimir Varbanov
fe4be5e9f9 dmaengine: bam-dma: fix a warning about missing capabilities
Avoid the warning below triggered during dmaengine async device
registration.

WARNING: CPU: 1 PID: 1 at linux/drivers/dma/dmaengine.c:863
dma_async_device_register+0x2a8/0x4b8()
this driver doesn't support generic slave capabilities reporting

To do that fill mandatory .directions bit mask,
.src/dst_addr_widths and .residue_granularity dma_device fields
with appropriate values.

Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-03-05 21:44:38 +05:30
Mitch A Williams
9466699001 i40e: don't spam the system log
The PF driver spams the system log with messages about VF VSI when VFs
are created, as well as each time they are reset. This is annoying, and
the information isn't even useful most of the time.

Remove this message to reduce user annoyance.

Change-ID: I8de90d05380f54b038c9c8c3265150be87c9242c
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Tested-by: Jim Young <james.m.young@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-03-05 07:54:10 -08:00
Shannon Nelson
3b44439934 i40e: move IRQ tracking setup into MSIX setup
Move the IRQ tracking setup and teardown into the same routines that
do the IRQ setup and teardown.  This keeps like activities together and
allows us to track exactly the number of vectors reserved from the OS,
which may be fewer than are available from the HW.

Change-ID: I6b2b1a955c5f0ac6b94c3084304ed0b2ea6777cf
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-03-05 07:36:08 -08:00
Anjali Singhai
232f47060a i40e: Ioremap changes
For future device support we do not want to map the whole CSR space since some
of it is mapped by other drivers with different mapping methods.

Note: As a side effect, the flash region (if exposed through the memory map)
gets unmapped too since it follows the future use region.

Change-ID: Ic729a2eacd692984220b1a415ff4fa0f98ea419a
Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Jim Young <james.m.young@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-03-05 07:15:28 -08:00
Greg Kroah-Hartman
d3d5389475 USB-serial fixes for v4.0-rc3
Here are a few fixes for reported problems including a usb-debug device
 buffer overflow, potential use-after-free on failed probe, and a couple
 of issues with the USB console.
 
 Some new device IDs are also added.
 
 Signed-off-by: Johan Hovold <johan@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJU+Fy4AAoJEEEN5E/e4bSVxSIQAM/ekC0n6/v2BqF+RJ+1YmGs
 pELjhVxgiUJ+TqgncxhFkbSVVKhBJ7JN8qOj2wV9r55WX8OgoGVoqFopz+PHeHWC
 2JvPYkGi0UhCxCLto/XFnS8KYT+ODCqDF3E9CJKZEl6X3TGmQJ0Lyka953vYRWO3
 0g3DwHGVdAHCH1ZZFJB4R/45i6ACLWd5A7zlyfvjrDYWfTgfONIFbaOjNATJFjre
 3FyUXM2TP/AZNAcPYt8IUrbrUIriKptmQJk0F2gZEyLvYwlmJvtutpMLUL+Xs0Hx
 rbQVsQfKt7Plo2nkUkJ+1B/Q15+0aTyA5dqdXeYG77R6O5Y9v1c6fpc5Jr+fIPI/
 jMP9LBeAUqQpKsLvtN4LG93a19r+0lJfdZtNTComLmSvQXYIiqRPNBlLmrBUN+Tq
 KG7TYHCoDsxw6jgMRPNLGn3lMEHxWej1lhI3UYSAXks1qixHLm+5+hVcqbKqMeaQ
 2gX/xEHIFgaHNvfl9Hr1ke2vMxHB/tSt7DcrQVgBsBQgEP6PgvG+fQajoIZ7YQJC
 K+ElAwUiGeYq2Kqp8ljqVd+q1LyQo0w9B3eJSG5URnmLkxzQ4PPVf2tnVxy+xq3q
 N10cp/6vKLFATF4+Gu2dMGuSbK5LsNvOAGpjr6VDAqb2wAFmaT+MaQKQlgo/6TQH
 L/Cj0mx7uyGwhtPBZES6
 =0CrX
 -----END PGP SIGNATURE-----

Merge tag 'usb-serial-4.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus

Johan writes:

USB-serial fixes for v4.0-rc3

Here are a few fixes for reported problems including a usb-debug device
buffer overflow, potential use-after-free on failed probe, and a couple
of issues with the USB console.

Some new device IDs are also added.

Signed-off-by: Johan Hovold <johan@kernel.org>
2015-03-05 07:15:17 -08:00
Jens Axboe
b8be79b714 NBD fixes based on v4.0-rc1
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJU+As6AAoJEEpcgKtcEGQQr5UQAJeNbwo3t45u+ftmL+rzznqr
 ospLlVirYqKcB3IZk8WUZ+xWtP2EyzJ6qiTPdYRC2lvgQMDiXTpqYkbi4lNCUr0V
 CBMVSWuOwlZOwlD0Cxr5L6m2A0X+M8aGI1OUISYZuogLaHxjgPRQiEs5vccQKcoF
 1ZHBg0Lguk+alfTLxEtddDfzETx72I+CRaJyxa/g9SNk91C1R8U/+YT6g9ryrF9H
 8bJ5K4p5LYJDecIZMTNTFCndNa1fFZmynDv4cvla0MOfrOwA+lSaIFdCtbSPEbUu
 WHjXzwDlsIKGjJY1Pt7YfND1B+khFSVS9Cgh11hQ0nOer6y3WRIxWg0Jyo7m+PUz
 W4J7Pd1sHr/IgPLLOOI0o21n+Glkqp/wh5O/mDEP0ZEWMpm4pdd2R+UX76Fv62QT
 YCKcYl/0oxbSPjLBKWZLw2hhmd/NRvU4GM7r/mHtQvOxrHEQf5HW9p4ZlQvU7GV3
 kSYZwbMZo/FsiP1KCC/VSv3l+BQJMcZRlBRg0pzSJTvZmGEaBSvydLd7lsV05OsJ
 txmmDw7Xd14rT8Uav83i9olXuZGX8tK+QDOdQxY7SMXmEiMWre1B4pvJu10lXrmo
 tmZ9zPEQyWdcsuf/og8coSk3QKQlqHHmlcdtz9WZKqUHbvE0l4g8GWS9OWBdyGR5
 RXpfcbwvd396f9JXxxob
 =ttVz
 -----END PGP SIGNATURE-----

Merge tag 'nbd_fixes_20150305' of git://git.pengutronix.de/git/mpa/linux-nbd into for-linus

NBD fixes based on v4.0-rc1
2015-03-05 07:46:13 -07:00
Jesse Brandeburg
5bbc330100 i40e/i40evf: Clean up some formatting and other things
Fix some double blank lines and un-split a function declaration that all
fits on one line. Also make i40e_get_priv_flags static.

Change-ID: I11b5d25d1153a06b286d0d2f5d916d7727c58e4a
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Neerav Parikh <neerav.parikh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-03-05 06:39:42 -08:00
Catherine Sullivan
180204c79f i40e: Add AOC PHY types to case statements
Add the 10G and 40G AOC PHY types to the case statement in get_media_type
and ethtool get_settings so that the correct information gets reported
back to the user.

Change-ID: I1b4849d22199a9acf7c8807166d0317c1faad375
Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-03-05 06:02:11 -08:00
Yongbae Park
1096be084a clockevents: sun5i: Fix setup_irq init sequence
The interrupt is enabled before the handler is set. Even this bug
did not appear, it is potentially dangerous as it can lead to a
NULL pointer dereference.

Fix the error by enabling the interrupt after
clockevents_config_and_register() is called.

Cc: stable@vger.kernel.org
Signed-off-by: Yongbae Park <yongbae2@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-03-05 15:01:37 +01:00
Yongbae Park
7b8f10da3b clocksource: efm32: Fix a NULL pointer dereference
The initialisation of the efm32 clocksource first sets up the irq and only
after that initialises the data needed for irq handling. In case this
initialisation is delayed the irq handler would dereference a NULL pointer.

I'm not aware of anything that could delay the process in such a way, but it's
better to be safe than sorry, so setup the irq only when the clock event device
is ready.

Cc: stable@vger.kernel.org
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Yongbae Park <yongbae2@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-03-05 15:01:36 +01:00
SenthilKumar Jegadeesan
b24af141c8 ath10k: increase AST table SKID length limit
The current SKID length configuration causes firmware
to reject peer creation for not able to allocate
AST entries for peers. This issue is observed when
least significant 3 bytes are used ramdomly to create
client MAC addresses.

AST table SKID length configuration is increased to
maximum value to fix this issue.

Signed-off-by: SenthilKumar Jegadeesan <sjegadee@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-03-05 15:56:54 +02:00
Peter Oh
dab74cde38 ath: enhance radar detection by looking up chirp
Certain radar types such as FCC radar type 5 are using chirp
in their pulses, hence looking up the chirp status will enhance
to avoid false radar detection.

Signed-off-by: Peter Oh <poh@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-03-05 15:55:35 +02:00
Peter Oh
2c3f26a065 ath10k: update chirp value in pulse event
Firmware reports chirp status in phy error event if it's detected
and the chirp status is valuable to distinguish radar types.
So save it to use for DFS parttern detector.

Signed-off-by: Peter Oh <poh@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-03-05 15:55:27 +02:00
Peter Oh
beb28edf02 ath: introduce chirp parameter used by DFS
Some of radar types such as FCC radar type 5 require
to look up chirp in pulse to detect genuine radar and
it will prevent DFS channels from false radar detection.

Signed-off-by: Peter Oh <poh@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-03-05 15:55:16 +02:00
Rajkumar Manoharan
30abb33076 ath10k: increase copy engine entries for rx wmi
Having lower number of copy engine entries for target to host
WMI ring is causing drops in receiving management frames. This
issue is observed during max clients (128 clients) stress testing.
While bursting deauthentication frames from simulated clients,
approx. 70% of frames are getting dropped due to lower ring entries.

Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-03-05 15:49:01 +02:00
Greg Rose
5b86c5cf75 i40e: Fix ethtool offline test
If the system administrator is requesting an offline diagnostic test using
'ethtool -t' then we should, you know, actually take the device offline
before doing the testing.

Change-ID: I6afa1cbfcc821c9ab6e6f47ed4d8dc2d8dd20e82
Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Tested-by: Jim Young <james.m.young@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-03-05 05:43:52 -08:00
Catherine Sullivan
088c4ee370 i40e: Reassign incorrect PHY type to fix a FW bug
Some FW versions are incorrectly reporting a breakout cable as PHY type
0x3 when it should be 0x16 (I40E_PHY_TYPE_10GBASE_SFPP_CU).
If we get this value back from FW and the version is < 4.40, reassign it
to I40E_PHY_TYPE_10GBASE_SFPP_CU.

Change-ID: Ibb41a0e3cd2c0753744e8553959240df6ed13ae8
Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com>
Tested-by: Jim Young <james.m.young@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-03-05 05:25:18 -08:00
Zefan Li
695df2132c cpuset: initialize cpuset a bit early
Now we call ss->bind() in cgroup_init(), so cgroup_init() will
call cpuset_bind() and then the latter will access top_cpuset's
cpumask, which is NULL, because cpuset_init() is called after
cgroup_init()

The simplest fix is to swap cgroup_init() and cpuset_init().

Cc: Vladimir Davydov <vdavydov@parallels.com>
Fixes: 295458e672 ("cgroup: call cgroup_subsys->bind on cgroup subsys initialization")
Reported by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Zefan Li <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Vladimir Davydov <vdavydov@parallels.com>
2015-03-05 08:05:20 -05:00
Tejun Heo
8603e1b300 workqueue: fix hang involving racing cancel[_delayed]_work_sync()'s for PREEMPT_NONE
cancel[_delayed]_work_sync() are implemented using
__cancel_work_timer() which grabs the PENDING bit using
try_to_grab_pending() and then flushes the work item with PENDING set
to prevent the on-going execution of the work item from requeueing
itself.

try_to_grab_pending() can always grab PENDING bit without blocking
except when someone else is doing the above flushing during
cancelation.  In that case, try_to_grab_pending() returns -ENOENT.  In
this case, __cancel_work_timer() currently invokes flush_work().  The
assumption is that the completion of the work item is what the other
canceling task would be waiting for too and thus waiting for the same
condition and retrying should allow forward progress without excessive
busy looping

Unfortunately, this doesn't work if preemption is disabled or the
latter task has real time priority.  Let's say task A just got woken
up from flush_work() by the completion of the target work item.  If,
before task A starts executing, task B gets scheduled and invokes
__cancel_work_timer() on the same work item, its try_to_grab_pending()
will return -ENOENT as the work item is still being canceled by task A
and flush_work() will also immediately return false as the work item
is no longer executing.  This puts task B in a busy loop possibly
preventing task A from executing and clearing the canceling state on
the work item leading to a hang.

task A			task B			worker

						executing work
__cancel_work_timer()
  try_to_grab_pending()
  set work CANCELING
  flush_work()
    block for work completion
						completion, wakes up A
			__cancel_work_timer()
			while (forever) {
			  try_to_grab_pending()
			    -ENOENT as work is being canceled
			  flush_work()
			    false as work is no longer executing
			}

This patch removes the possible hang by updating __cancel_work_timer()
to explicitly wait for clearing of CANCELING rather than invoking
flush_work() after try_to_grab_pending() fails with -ENOENT.

Link: http://lkml.kernel.org/g/20150206171156.GA8942@axis.com

v3: bit_waitqueue() can't be used for work items defined in vmalloc
    area.  Switched to custom wake function which matches the target
    work item and exclusive wait and wakeup.

v2: v1 used wake_up() on bit_waitqueue() which leads to NULL deref if
    the target bit waitqueue has wait_bit_queue's on it.  Use
    DEFINE_WAIT_BIT() and __wake_up_bit() instead.  Reported by Tomeu
    Vizoso.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Rabin Vincent <rabin.vincent@axis.com>
Cc: Tomeu Vizoso <tomeu.vizoso@gmail.com>
Cc: stable@vger.kernel.org
Tested-by: Jesper Nilsson <jesper.nilsson@axis.com>
Tested-by: Rabin Vincent <rabin.vincent@axis.com>
2015-03-05 08:04:13 -05:00
Jesse Brandeburg
9a660eeae2 i40e: fix XPS mask when resetting
During resets (possibly caused by a Tx hang) the driver would
accidentally clear the XPS mask for all queues back to 0.

This caused higher CPU utilization and had some other performance impacts
for transmit tests.

Change-ID: I95f112432c9e643a153eaa31cd28cdcbfdd01831
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-03-05 04:57:33 -08:00
Nicolin Chen
6c8ca30eec ASoC: fsl_ssi: Don't try to round-up for PM divisor calculation
According to i.MX6 Series Reference Manual, the formula to calculate
the sys clock is

sysclk rate = bclk rate * (div2 + 1) * (7 * psr + 1) * (pm + 1) * 2

Commit aafa85e71a ("ASoC: fsl_ssi: Add DAI master mode support for
SSI on i.MX series") added the divisor calculation which relies on
the clk_round_rate(). However, at that time, clk_round_rate() didn't
provide closest clock rates for some cases because it might not use
a correct rounding policy. So using the original formula (pm + 1) for
PM divisor was not able to give us a desired clock rate. And then we
used (pm + 2) to do the trick.

However, the clk-divider driver has been refined a lot since commit
b11d282dbe ("clk: divider: fix rate calculation for fractional rates")
Now using (pm + 2) trick would result an incorrect clock rate.

So this patch fixes the problem by removing the useless trick.

Reported-by: Stephane Cerveau <scerveau@voxtok.com>
Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-05 12:23:29 +00:00
Emmanuel Grumbach
4cd4b50cc2 iwlwifi: mvm: BT Coex - fix a NULL pointer exception
The commit below introduced an unsafe dereference of
mvmvif->phy_ctxt. It can be NULL even if we hold the mutex.
We can be handling a BT Coex notification while the vif has
already been unassigned. This can happen since the BT Coex
notification is hanled asynchronuously: we can have started
to handle the BT Coex notification trying to acquire the
mutex while the unassign flow already got it. The BT Coex
notification handling will wait for the mutext. I'll get it
later, but then mvmvif->phy_ctxt will be NULL.

Panic log:

BUG: unable to handle kernel NULL pointer dereference at   (null)
IP: [<f985180d>] iwl_mvm_bt_notif_iterator+0x9d/0x340 [iwlmvm]
*pdpt = 0000000000000000 *pde = f000eef300000007
Oops: 0000 [#1] SMP
Workqueue: events iwl_mvm_async_handlers_wk [iwlmvm]
task: ed719b20 ti: ec03e000 task.ti: ec03e000
EIP: 0060:[<f985180d>] EFLAGS: 00010202 CPU: 2
EIP is at iwl_mvm_bt_notif_iterator+0x9d/0x340 [iwlmvm]
EAX: 00000000 EBX: f6d3cb70 ECX: f6d3cb70 EDX: 00000000
ESI: ec03fe40 EDI: efeb8810 EBP: ec03fdf0 ESP: ec03fdac
 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
CR0: 80050033 CR2: 00000000 CR3: 01a1a000 CR4: 001407f0
Stack:
 f743ca80 f744a404 ec03fdcc c10e3952 00003aba f743ca80 00000246 f743ca80
 00000246 00000000 00000001 00000000 ebd45ff6 ebd458a4 f6d3c500 ebd45578
 ebd44b01 ec03fe18 f99e1bc2 00000002 ebd44bc0 f9851770 00000000 f6d3c500
Call Trace:
 [<c10e3952>] ? ring_buffer_unlock_commit+0xa2/0xd0
 [<f99e1bc2>] __iterate_interfaces+0x82/0x110 [mac80211]
 [<f9851770>] ? iwl_mvm_bt_coex_reduced_txp+0x140/0x140 [iwlmvm]
 [<f99e1c6a>] ieee80211_iterate_active_interfaces_atomic+0x1a/0x20 [mac80211]
 [<f9851427>] iwl_mvm_bt_coex_notif_handle+0x77/0x280 [iwlmvm]
 [<f9852161>] iwl_mvm_rx_bt_coex_notif_old+0x211/0x220 [iwlmvm]
 [<f9850b8b>] iwl_mvm_rx_bt_coex_notif+0x19b/0x1b0 [iwlmvm]
 [<f983944f>] iwl_mvm_async_handlers_wk+0x7f/0xe0 [iwlmvm]

CC: <stable@vger.kernel.org> [3.19+]
Fixes: 123f515635 ("iwlwifi: mvm: BT Coex - add support for TTC / RRC")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-03-05 14:13:20 +02:00
Rafał Miłecki
1ca2760fb2 bcma: prepare Kconfig symbol for PCI driver
Driver for PCIe core requires PCI to be enabled, however we shouldn't
require it for the whole bus. Someone may be not interested in extra
PCI devices and what's more there are SoCs without any PCI at all (like
BCM5356C0, BCM5357*, BCM47186B0). For more details see Kconfig "help".
Please note this patch doesn't allow disabling PCI drivers yet, as it
requires more work on calls to bcma_core_pci_* functions.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-05 14:11:45 +02:00
Rafał Miłecki
0a4e699a41 bcma: move internal function declarations to private header
These functions are not exported nor used anywhere, so there is no
reason to put them in public headers.
Also drop unused bcma_chipco_(suspend|resume).

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-05 14:11:43 +02:00
Rafał Miłecki
c32ec2a113 bcma: make bcma_host_pci_(up|down) calls safe for every config
We were providing declarations but actual code was compiled only with
CONFIG_BCMA_HOST_PCI set. This could result in:
ERROR: "bcma_host_pci_down" [drivers/net/wireless/brcm80211/brcmsmac/brcmsmac.ko] undefined!
ERROR: "bcma_host_pci_up" [drivers/net/wireless/brcm80211/brcmsmac/brcmsmac.ko] undefined!
ERROR: "bcma_host_pci_down" [drivers/net/wireless/b43/b43.ko] undefined!
ERROR: "bcma_host_pci_up" [drivers/net/wireless/b43/b43.ko] undefined!

Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-05 14:11:40 +02:00
Takashi Iwai
f44f07cf39 ALSA: line6: Clamp values correctly
The usages of clamp() macro in sound/usb/line6/playback.c are just
wrong, the low and high values are swapped.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-05 13:03:28 +01:00
Dan Carpenter
096a020a9e ALSA: msnd: add some missing curly braces
There were some curly braces intended here.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-05 13:02:10 +01:00
Jesse Brandeburg
ce7ca75176 i40e: use more portable sign extension
Use automatic sign extension by replacing 0xffff... constants
with ~(u64)0 or ~(u32)0.

Change-ID: I73cab4cd2611795bb12e00f0f24fafaaee07457c
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Kevin Scott <kevin.c.scott@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-03-05 04:00:06 -08:00
Chen Gang
b09f5ec18b bcma: Kconfig: Let it depend on PCI
bcma also needs PCI, just like IOMEM and DMA, so let it depend on PCI,
or will cause building break for allmodconfig under c6x:

    CC [M]  drivers/bcma/driver_pcie2.o
  drivers/bcma/driver_pcie2.c: In function 'bcma_core_pcie2_up':
  drivers/bcma/driver_pcie2.c:196:8: error: implicit declaration of function 'pcie_set_readrq' [-Werror=implicit-function-declaration]
    err = pcie_set_readrq(dev, pcie2->reqsize);
          ^

Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-05 13:56:59 +02:00
Shannon Nelson
4f651a5b0a i40e/i40evf: grab NVM devstarter version not image version
0x2A is the NVM version so it has useful data but it is per image
version every image can have a different one. 0x18 is the dev starter
version which all the images for release will have the same version.
Of the two 0x18 is more useful and is what should be displayed.

Change-ID: Idf493da13a42ab211e2de0bef287f5de51033cca
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-03-05 03:04:33 -08:00
Patrice Vilchez
5957457a2d ARM: at91/pm: MOR register KEY was missing
Because writing the MOR register requires the PASSWD(0x37),
if missed, the write operation will be aborted.

Signed-off-by: Patrice Vilchez <patrice.vilchez@atmel.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-05 11:43:02 +01:00
Boris BREZILLON
db68e71a0e ARM: at91/dt: sama5d4: fix lcdck clock definition
lcdck takes mck (not smd) as its parent. It is also assigned id 3 and not 4.

Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
[nicolas.ferre@atmel.com: squashed 2 related patches]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-05 10:58:59 +01:00
Boris BREZILLON
b6d7d3f1f3 ARM: at91/dt: sama5d4: rename lcd_clk into lcdc_clk
Rename lcd_clk into lcdc_clk to be consistent with sama5d3 clock
definitions.

Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-05 10:58:51 +01:00
Alexandre Belloni
5a5a6451ac ARM: at91: debug: fix non MMU debug
Linux may be used without MMU on atmel SoCs, fix debug in this configuration.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-05 10:55:13 +01:00
Neerav Parikh
7589f65b32 i40e: Don't check operational or sync bit for App TLV
In CEE mode the firmware does not set the operational status bit of
the application TLV status as returned from the "Get CEE DCBX Oper Cfg"
AQ command. This occurs whenever a DCBX configuration is changed.

This is a workaround to remove the check for the operational and sync bits
of the application TLV status till a firmware fix is provided.

Change-ID: I1a31ff2fcadcb06feb5b55776a33593afc6ea176
Signed-off-by: Neerav Parikh <neerav.parikh@intel.com>
Acked-by: Shannon Nelson <shannon.nelson@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-03-05 01:53:22 -08:00
Chanwoo Choi
3c5ecc9ed3 pinctrl: exynos: Add support for Exynos5433
This patch adds driver data for Exynos5433 SoC. Exynos5433 includes 228 multi-
functional input/output port pins and 135 memory port pins. There are 41 general
port groups and 2 memory port groups.

Cc: Thomas Abraham <thomas.abraham@linaro.org>
Acked-by: Tomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-05 10:52:54 +01:00
Kevin Hao
32c006a997 gpio: mpc8xxx: remove __initdata annotation for mpc8xxx_gpio_ids[]
Since commit 98686d9a52 ("gpio: mpc8xxx: Convert to platform device
interface"), we get the following section mismatch warning. Remove the
__initdata annotation to fix it.
  WARNING: vmlinux.o(.data+0xbc28): Section mismatch in reference from the variable mpc8xxx_plat_driver to the variable .init.data:mpc8xxx_gpio_ids
  The variable mpc8xxx_plat_driver references
  the variable __initdata mpc8xxx_gpio_ids
  If the reference is valid then annotate the
  variable with __init* or __refdata (see linux/init.h) or name the variable:
  *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console

Signed-off-by: Kevin Hao <haokexin@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-05 10:51:35 +01:00
Matt Jared
b84d5cd819 i40e: during LED interaction ignore activity LED src modes
Modify our get and set LED functions so they ignore activity LEDs,
as we are required to blink the link LEDs only.

Change-ID: I647ea67a6fc95cbbab6e3cd01d81ec9ae096a9ad
Signed-off-by: Matt Jared <matthew.a.jared@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-03-05 01:31:15 -08:00
Linus Walleij
40eeb111d7 Revert "pinctrl: consumer: use correct retval for placeholder functions"
This reverts commit 5a7d2efdd9.

As per discussion on the mailing list, this is not the right
thing to do. NULL cookies are valid in the stubs.

Reported-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-05 10:08:14 +01:00
Greg Rose
c668a12c7b i40e: Fix NPAR Tx Scheduler init
Recent changes to the driver initialization have caused the BW
configurations to not take effect.  We use a BW configuration read and
write back to "kick" the Tx scheduler into action.

Change-ID: I94ab377c58d3a3986e3de62b6c199be3fd2ee5e6
Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Tested-by: Jim Young <james.m.young@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-03-05 01:05:55 -08:00
Dave Jiang
9ca1c5f2ab dmaengine: ioatdma: workaround for incorrect DMACAP register
BDX-DE IOATDMA reports incorrect DMACAP register for PQ related
ops. Ignoring those bits.

Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-03-05 14:32:02 +05:30
Kalle Valo
e3e72f38a5 Merge ath-next from ath.git
Major changes in ath10k:

* qca6174: enable STA transmit beamforming (TxBF) support
* disable multi-vif power save by default
2015-03-05 11:01:48 +02:00
Ludovic Desroches
6eb9d3c1e9 dmaengine: at_xdmac: fix for chan conf simplification
When simplificating the channel configuration, the cyclic case has been
forgotten. It leads to use bad configuration causing many bugs.

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-03-05 14:29:57 +05:30
Rojhalat Ibrahim
331758eef8 gpiolib: add devm_gpiod_get_array and devm_gpiod_put_array functions
Add device managed variants of gpiod_get_array() / gpiod_put_array()
functions for conveniently obtaining and disposing of an entire array
of GPIOs with one function call.

Signed-off-by: Rojhalat Ibrahim <imr@rtschenk.de>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-05 09:55:42 +01:00
Rojhalat Ibrahim
6685852732 gpiolib: add gpiod_get_array and gpiod_put_array functions
Introduce new functions for conveniently obtaining and disposing of
an entire array of GPIOs with one function call.

ACPI parts tested by Mika Westerberg, DT parts tested by Rojhalat
Ibrahim.

Change log:
v5: move the ACPI functions to gpiolib-acpi.c
v4: - use shorter names for members of struct gpio_descs
    - rename lut_gpio_count to platform_gpio_count for clarity
    - add check for successful memory allocation
    - use ERR_CAST()
v3: - rebase on current linux-gpio devel branch
    - fix ACPI GPIO counting
    - allow for zero-sized arrays
    - make the flags argument mandatory for the new functions
    - clarify documentation
v2: change interface

Suggested-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Rojhalat Ibrahim <imr@rtschenk.de>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: Rojhalat Ibrahim <imr@rtschenk.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-05 09:52:28 +01:00
Rojhalat Ibrahim
7f2e553a71 gpiolib: define gpio suffixes globally
Avoid multiple identical definitions of the gpio suffix strings by putting
them into a global constant array.

Signed-off-by: Rojhalat Ibrahim <imr@rtschenk.de>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-05 09:48:51 +01:00
Ingo Molnar
c709feda56 x86/mm/pat: Initialize __cachemode2pte_tbl[] and __pte2cachemode_tbl[] in a bit more readable fashion
The initialization of these two arrays is a bit difficult to follow:
restructure it optically so that a 2D structure shows which bit in
the PTE is set and which not.

Also improve on comments a bit.

No code or data changed:

  # arch/x86/mm/init.o:

   text    data     bss     dec     hex filename
   4585     424   29776   34785    87e1 init.o.before
   4585     424   29776   34785    87e1 init.o.after

md5:
   a82e11ff58bcfd0af3a94662a701f65d  init.o.before.asm
   a82e11ff58bcfd0af3a94662a701f65d  init.o.after.asm

Reviewed-by: Juergen Gross <jgross@suse.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Jan Beulich <JBeulich@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Toshi Kani <toshi.kani@hp.com>
Cc: linux-kernel@vger.kernel.org
Link: http://lkml.kernel.org/r/20150305082135.GB5969@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-05 09:48:17 +01:00
Jie Yang
94b3eed7b8 dmaengine: dw: don't handle interrupt when dmaengine is not used
When dma controller is not used by any user and set off,
we should disble interrupt handler, at least the interrupt
reset part, for some subsystem, e.g. ADSP, may use the
dma in its own logic, here reset the interrupt may make
this subsystem work abnormally.

Signed-off-by: Jie Yang <yang.jie@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-03-05 14:07:48 +05:30
Ingo Molnar
c281b94570 init.h: Clean up the __setup()/early_param() macros
Make it all a bit easier on the eyes:

 - Move the __setup_param() lines right after their init functions
 - Use consistent vertical spacing
 - Use more horizontal spacing to make it look like regular C code
 - Use standard comment style

Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Dexuan Cui <decui@microsoft.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jan Beulich <JBeulich@suse.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Toshi Kani <toshi.kani@hp.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xishi Qiu <qiuxishi@huawei.com>
Cc: julia.lawall@lip6.fr
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-05 09:23:12 +01:00